Samsung S1000 User Manual
Thank you for buying a Samsung Camera.
This manual will guide you through using the camera, including
capturing images, downloading images and using the application software.
Please read this manual carefully before using your new camera.
User’s Manual
ENGLISH
ŝ1Ş
Instructions Getting to know your camera
ƈ Use this camera in the following order
Set up the camera driver
Take a picture
Insert the USB cable
Check the camera’s power
Check [Removable Disk]
Before connecting the camera to a PC, via
the USB cable, you will need to set up the
camera driver. Install the camera driver
that is contained in Application software
CD-ROM. (p.68)
Take a picture. (p.14)
Insert the supplied USB cable into the
PC’s USB port and the camera’s USB
connection terminal. (p.70)
Check the camera’s power. If the power is
turned off, press the camera button to turn
it on.
Open Window’s EXPLORER and search
for [Removable Disk]. (p.72)
ƃ If you use a card reader to copy the images on the memory card to your PC, the
images could be damaged. When transferring the images taken with the camera
to your PC, be sure to use the supplied USB cable to connect the camera to
your PC. Please note that the manufacturer holds no responsibility for loss or
damage of images on the memory card due to the use of a card reader.
Thank you for buying a Samsung Digital Camera.
ƃ Prior to using this camera, please read the user manual thoroughly.
ƃ When you require After Sales service, please bring the camera and the cause of
the camera malfunction (such as battery, Memory card etc.) to the A/S centre.
ƃ Please check that the camera is operating properly prior to when you intend to
use it (e.g. for a trip or an important event) to avoid disappointment. Samsung
camera takes no responsibility for any loss or damages that may result from
camera malfunction.
ƃ Keep the manual in a safe place.
Ҭ Microsoft, Windows and Windows logo are registered trademarks of Microsoft
Corporation incorporated in the United States and/or other countries.
Ҭ All brand and product names appearing in this manual are registered trademarks
of their respective companies.
Samsung Techwin cares for the environment at all product
manufacturing stages to preserve the environment, and is
taking a number of steps to provide customers with more
environment-friendly products.The Eco mark represents
Samsung Techwin’s will to create environment-friendly
products, and indicates that the product satisfies the EU
RoHS Directive.
Danger
Warning
ŝ2Ş
Caution
WARNING indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injury.
ƈ Do not use the flash in close proximity to people or animals. Positioning the flash too
close to your subject’s eyes may cause eyesight damage.
ƈ For safety reasons keep this product and accessories out of reach of children or
animals to prevent accidents e.g.:
ҮSwallowing battery or small camera accessories. If an accident should occur,
please consult a doctor immediately.
ҮThere is the possibility of injury from the camera’s moving parts.
ƈ Battery and camera may become hot during prolonged use and it may result in
camera malfunction. Should this be the case, allow the camera to sit idle for a few
minutes to allow it time to cool.
ƈ Do not leave this camera in places subject to extremely high temperatures, such as
a sealed vehicle, direct sunlight or other places of extreme variances in temperature.
Exposure to extreme temperatures may adversely affect the camera’s internal
components and could cause a fire.
ƈ When in use, do not cover the camera or Charger. This may cause heat to build up
and distort the camera body or cause a fire. Always use the camera and its
accessories in a well-ventilated area.
DANGER indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury.
ƈ Do not attempt to modify this camera in any way. This may result in fire, injury,
electric shock or severe damage to you or your camera. Internal inspection,
maintenance and repairs should be carried out by your dealer or Samsung Camera
Service centre.
ƈ Please do not use this product in close proximity to flammable or explosive gases,
as this could increase the risk of explosion.
ƈ Should any form of liquid or a foreign object enter the camera, do not use it. Switch
off the camera, and then disconnect the power source. You must contact your
dealer or Samsung Camera Service centre. Do not continue to use the camera as
this may cause a fire or electric shock.
ƈ Do not insert or drop metallic or inflammable foreign objects into the camera through
access points e.g. the memory card slot and battery chamber. This may cause a fire
or electric shock.
ƈ Do not operate this camera with wet hands. This could pose a risk of electric shock.
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in a minor or moderate injury.
ƈ Leaking, overheating, or burst battery could result in fire or injury.
ҮUse battery with the correct specification for the camera.
ҮDo not short circuit, heat or dispose of battery in fire.
ҮDo not insert the battery with the polarities reversed.
ƈ Remove the battery when not planning to use the camera for a long period of
time. Battery may leak corrosive electrolyte and permanently damage the
camera’s components.
ƈ Do not fire the flash while it is in contact with hands or objects. Do not touch the
flash after using it continuously. It may cause burns.
ƈ Do not move the camera while it is switched on, if you are using the AC Charger.
After use, always switch off the camera before unplugging the cable from the
wall socket. Then make sure that any connector cords or cables to other devices
are disconnected before moving the camera. Failure to do so may damage the
cords or cables and cause a fire or electric shock.
ƈ Take care not to touch the lens or lens cover to avoid taking an unclear image
and possibly causing camera malfunction.
ƈ Avoid obstructing the lens or the flash when you capture an image.
ƈ Credit cards may be demagnetized if left near case. Avoid leaving magnetic strip
cards near the case.
ŝ3Ş
Contents
READY
ƃSystem chart ōōōōōōōōō4
ƃIdentification of features ōōōōō5
ƈFront & Topōōōōōōōōōō5
ƈBack & Bottom ōōōōōōōō6
ƈBottom / 5-function buttonōōōō7
ƈCradle(Optional)ōōōōōōōō7
ƈSelf-timer lamp ōōōōōōōō8
ƈCamera Status Lamp ōōōōō8
ƈMode icon ōōōōōōōōōō8
ƃConnecting to a Power Source ōō8
ƈUsing the batteriesōōōōōōō8
ƃInserting the memory card ōōōō9
ƃ
I
nstructions on how to use the memory card
ō10
ƃ
When Using the Camera for the First Time
ō12
ƃLCD monitor indicator ōōōōō13
ƃStarting the recording mode ōō14
ƈHow to use the AUTO mode ōō14
ƈ
How to use the PROGRAM mode
ō14
ƈ
How to use the MANUAL mode
ō14
ƈ
How to use the MOVIE CLIP mode
ō15
ƈ
Recording the movie clip without voice
ō15
ƈ
Pausing while recording a movie clip
ō15
ƈNight / Portrait / Children mode ō16
ƈHow to use the SCENE mode ō16
ƈHow to use the VOICE
RECORDING mode ōōōōō17
ƃThings to Watch Out for When
Taking Pictures ōōōōōōōō17
ƃUsing the camera buttons to set
the camera ōōōōōōōōō18
ƈPOWER button ōōōōōōō18
ƈShutter button ōōōōōōōō18
ƈZOOM W / T buttonōōōōōō18
ƈVoice recording / Voice memo /
UP button ōōōōōōōōōō20
ƈMacro / Down button ōōōōō20
ƈFocus lock ōōōōōōōōō21
ƈFlash / Left button ōōōōōō22
ƈSelf-timer / Right button ōōōō23
ƈMENU / OK button ōōōōōō24
ƈE (Effect) button ōōōōōōō25
ƈSpecial Effect : Colourōōōōō25
ƈ
Special Effect : Preset focus frames
ō26
ƈ
Special Effect : Composite shooting
ō27
ƈSpecial Effect : Photo Frame ōō28
ƈMovie Clip frame stabiliser ōōō29
ƈ+ / - button ōōōōōōōōōō29
ƃUsing the LCD monitor to set the
camera settingsōōōōōōōō32
ƈHow to use the menu ōōōōō32
ƈSize ōōōōōōōōōōōō33
ƈQuality / Frame rateōōōōōō33
ƈMetering ōōōōōōōōōō34
ƈContinuous shot ōōōōōōō34
ƈSharpness ōōōōōōōōō35
ƈOSD (On Screen Display)
information ōōōōōōōōō35
ƃStarting play mode ōōōōōō36
ƈPlaying back a still image ōōō36
ƈPlaying back a movie clip ōōō36
ƈHow to capture the movie clip ō37
ƈPlaying back a recorded voice ō38
ƃLCD monitor Indicator ōōōōō38
ƃUsing the camera buttons to set
the camera ōōōōōōōōō39
ƈ
Thumbnail / Enlargement button
ō39
ƈVoice memo / Up button ōōōō40
ƈPlay & Pause / Down button ōō41
ƈE (Effect) button ōōōōōōō41
ƈDelete button ōōōōōōōō42
ƈPrinter button ōōōōōōōō42
ƈLeft / Right / Menu / OK button ō43
ƃSetting up the play back function
using the LCD monitor ōōōōō43
ƈStarting the slide show ōōōō45
ƈProtecting images ōōōōōō46
ƈDeleting images ōōōōōōō47
ƈResize ōōōōōōōōōōō47
ƈRotating an image ōōōōōō48
ƈDPOF ōōōōōōōōōōō48
ƈDPOF : Standardōōōōōōō49
ƈDPOF : Index ōōōōōōōō49
ƈDPOF : Print sizeōōōōōōō50
ƈCopy To Card ōōōōōōōō50
ƈOn Screen Display information ō51
ƈPictBridge ōōōōōōōōōō51
ƈPictBridge : Picture Selection ōō52
ƈPictBridge : Print Setting ōōōō52
ƈPictBridge : Printing ōōōōōō53
ƈPictBridge : DPOF Printing ōōō54
ƈPictBridge : Reset ōōōōōō54
ƃSetup menu ōōōōōōōōō54
ƈFile name ōōōōōōōōōō55
ƈAuto power off ōōōōōōōō56
ƈLanguage ōōōōōōōōō56
ƈFormatting a memory ōōōōō57
ƈ
Setting up the Date / Time / Date type
ō57
ƈImprinting the recording date ōō57
ƈSound ōōōōōōōōōōō58
ƈ
Connecting an External Device (USB)
ō58
ƈAuto Focus lamp ōōōōōōō58
ƈLCD brightness ōōōōōōō58
ƈSelecting Video out type ōōōō59
ƈQuick view ōōōōōōōōō59
ƈInitialisation ōōōōōōōōō60
ƈSelecting a battery type ōōōō60
ƃSetting up the Mycam menu ōō60
ƈStart up image ōōōōōōōō60
ƈStart up sound ōōōōōōōō61
ƈShutter sound ōōōōōōōō61
ƃImportant notesōōōōōōōō61
ƃWarning indicator ōōōōōōō63
ƃ
Before contacting a service centre
ō63
ƃSpecifications ōōōōōōōō65
ƃSoftware Notes ōōōōōōōō67
ƃSystem Requirements ōōōōō67
ƃAbout the software ōōōōōō67
ƃ
Setting up the application software
ō68
ƃStarting PC mode ōōōōōōō70
ƃRemoving the removable diskōō72
ƃ
Setting up the USB Driver for MAC
ō72
ƃUsing the USB Driver for MAC ō72
ƃRemoving the USB Driver for
Windows 98SE ōōōōōōōō73
ƃDigimax Masterōōōōōōōō73
ƃFAQ ōōōōōōōōōōōō76
PLAY
SETUP
SOFTWARE
RECORDING
ŝ4Ş
System chart
Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your
nearest Samsung dealer or Samsung service centre.
Software CD
(see p.67)
Camera strap
User manual,
Product warranty
Camera case
Rechargeable battery
(SNB-2512)
AA Alkaline
Batteries
Rechargeable battery
(SBP-2524)
Cradle AC cord Charger(SBC-N1)
External monitor
(see p.59)
< Included items >
Computer
(see p.70)
PictBridge compatible
printer (see p.51)
SD memory card/ MMC
(see p.9)
DPOF compatible
printer (see p.48)
USB cable AV cable
ŝ5Ş
Identification of features
Front & Top
Strap eyelet
Shutter button
Mode dial
Power button
Speaker
Microphone
Lens / Lens cover
Flash
Self-timer lamp /
Auto focus lamp
ŝ6Ş
Identification of features
Back & Bottom
LCD monitor
Tripod socket
5 function button
E (Effects) button
Play mode / Printer button
Zoom T button (Digital zoom)
Camera status lamp
Zoom W button (Thumbnail)
+/- button, Delete button
USB / AV connection terminal
Cradle connector
ŝ7Ş
Identification of features
Bottom / 5-function button Cradle (Optional)
ƈ You can recharge your rechargeable battery (SBP-2524), transfer a captured
image to print, and download images with the cradle. (Refer to page 51, 70)
Camera
connection
terminal
AC connection
terminal
USB port /
AV connection terminal
Battery chamber
Battery chamber cover
Voice memo / Voice Recording / Up button
Flash /
Left button
Menu / OK button
Self-timer /
Right button
Macro / Down button
Play & Pause button
ƃ Top
ƃ Back
Memory card slot
ŝ8Ş
Connecting to a Power Source
Identification of features
ƈ Self-timer lamp
Icon Status Description
For the first 8 seconds, the lamp blinks at 1 second
intervals.
For the final 2 seconds, the lamp blinks quickly at 0.25second intervals.
For the 2 seconds, the lamp blinks quickly at 0.25-second
intervals before taking a picture
A picture will be taken after about 10 seconds and 2
seconds later a second picture will be taken.
Blinking
Blinking
Blinking
ƈCamera Status Lamp
ƈ Mode icon: Refer to page 14~17 for more information about the camera mode
setting.
Status Description
The lamp turns on and off when the camera is ready to
take a picture
The lamp blinks while saving the image data and turns
off when the camera is ready to take a picture
While voice memo recording
The lamp blinks
While voice recording The lamp blinks
Transmitting Data with a PC
The lamp turns on (LCD monitor turns off)
When the printer is printing
The lamp blinks
The lamp turns on (The camera focus on the subject)
The lamp blinks (The camera doesn't focus on the subject)
After taking a picture
When the AF activates
When the USB cable is
inserted to a printer
The lamp is off
Power on
ƃ We recommend using batteries for a digital camera (Within a year from the date
of manufacture). The batteries are listed below.
- Non rechargeable batteries : 2 X AA Alkaline (High Capacity)
- Rechargeable batteries (Optional) : SNB-2512 (Ni-MH)
SBP-2524 (Ni-MH)
Using the batteries
Model SBP-2524 SNB-2512
Type Ni-MH Ni-MH
Capacity 2,500mAh 2,500mAh
Voltage 1.2V X 2 1.2V X 2
Approximately 210 ~ 240Minutes
(Use for cradle)
Charging time
Approximately 240 Minutes
(Use for SBC-N1)
ſ Included battery may vary depending on sales region.
MODE AUTO PROGRAM MANUAL NIGHT PORTRAIT
Icon
MODE CHILDREN MOVIE
VOICE RECORDING
PLAY -
Icon -
LANDSCAPE
CLOSE UP
SUNSET DAWN
BACKLIGHT
FIREWORKS
BEACH & SNOW
Icon
MODE
SCENE
ŝ9Ş
Connecting to a Power Source
Important information about battery usage
ƃ When the camera is not used, turn off the camera power.
ƃ Please remove the battery if the camera will not be used for long periods.
Battery can lose power over time and are prone to leaking if kept inside the
camera.
ƃ Low temperatures (below 0˚C) can affect the performance of the battery
and you may experience reduced battery life.
ƃ Batteries will usually recover at normal temperatures.
ƃ During extended use of the camera, the camera body may become warm.
This is perfectly normal.
INFORMATION
Inserting the memory card
ƈ Insert the battery as shown
- If the camera does not turn on after you
have inserted battery, please check
whether the battery is inserted with the
correct polarity (+ / -).
- When the battery chamber cover is opened,
do not press the battery chamber cover by
force. This may cause damage to the
battery chamber cover.
Battery
status
Battery
indicator
The battery is
fully charged
Low battery capacity
(Prepare to recharge
or use spare battery)
Low battery capacity
(Prepare to recharge
or use spare battery)
Low battery capacity
(Prepare to recharge
or use spare battery)
ƈ There are 4 indicators for battery condition that are displayed on the LCD
monitor.
ƈ Insert the memory card as shown.
- Turn off the camera’s power before
inserting the memory card.
- Have the front of the memory card facing
toward the front of the camera (lens) and
the card pins toward the back of the camera
(LCD monitor).
- Do not insert the memory card the wrong
way round. Doing so may damage the
memory card slot.
ƃ Be sure to format the memory card (see p.57) if you are using a newly
purchased memory for the first time, if it contains data that the camera cannot
recognise, or if it contains images captured with a different camera.
ƃ Turn off the camera power whenever the memory card is being inserted or
removed.
ƃ Repeated use of the memory card will eventually reduce the memory card’s
performance. Should this be the case, you will need to purchase a new memory
card. Wear and tear on the memory card is not covered by the Samsung
warranty.
ƃ The memory card is an electronic precision device.
Do not bend, drop or subject the memory card to any heavy impact.
ƃ Do not store the memory card in an environment with strong electronic or
magnetic fields, e.g. near loud speakers or TV receivers.
ƃ Please do not use or store in an environment where there are extremes in
temperature.
ƃ Do not allow the memory card to become dirty or to come into contact with any
liquid. Should this happen, clean the memory card with a soft cloth.
ƃ Please keep the memory card in its case when not in use.
ƃ During and after periods of extended use, you may notice that the memory card
is warm. This is perfectly normal.
ƃ Do not use a memory card that is used in another digital camera.
To use the memory card in this camera, format the memory card using this
camera.
ƃ Do not use a memory card formatted by another digital camera or memory card
reader.
ƃ If the memory card is subjected to any of the following, the recorded data may
become corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while recording,
deleting (formatting) or reading.
ƃ Samsung cannot be held responsible for lost data.
ƃ It is advisable to copy important data onto other media as back-up e.g. floppy
disks, hard disks, CD etc.
ƃ If there is insufficient memory available
: A [Memory Full!] message will appear and the camera will not operate. To
optimise the amount of memory in the camera, replace the memory card or
delete unnecessary images stored on the memory card.
ŝ10Ş
Instructions on how to use the memory card
ŝ11Ş
Instructions on how to use the memory card
[ SD (Secure Digital) memory card ]
Write protect
switch
Label
Card pins
ƈ The camera can use SD Memory Cards and MMC (Multi Media Cards).
Please consult the enclosed manual for using the MMC Cards.
The SD memory card has a write protect
switch that prevents image files from
being deleted or formatted. By sliding the
switch to the bottom of the SD memory
card, the data will be protected. By sliding
the switch to the top of the SD memory
card, the data protection will be
cancelled.
Slide the switch to the top of the SD
memory card before taking a picture.
ƃ Don't remove the memory card when the camera status lamp is blinking as
this may cause damage to data in the memory card.
INFORMATION
ƈ When using a 256MB MMC (Multi Media Card), the specified shooting capacity
will be as follows. These figures are approximate as image capacities can be
affected by variables such as subject matter and memory card type.
ſ The recording times can be changed by the zoom operation.
The zoom button doesn’t use during the movie recording.
Recorded image size
Super Fine
Fine Normal
30FPS 15FPS
48 94 109 - 53 104 151 - 60 115 169 - 67 128 197 - 80 157 223 - 93 181 264 - -
121 226 279 - 148 284 400 - 244 434 520 - 520 868 1041 - -
1041 1116 1302 - -
---
About 13'16" About 21'29"
---
About 36'39" About 60'24"
---
About 73'08"
About 133'13"
640
320
160
10M
9M
8M
7M
6M
5M
4M
3M
2M
1M
VGA
* Movie
clip
Still
image
ŝ12Ş
When Using the Camera for the First Time
ƈCharge the rechargeable battery fully before using the camera for the first time.
ƈWhen the camera is turned on for the first time, a menu will be displayed to set
date / time, language and battery type in the LCD monitor. This menu will not be
displayed after setting up. Set up the date / time, language and battery type
before using this camera.
ƃ Setting up the date, time and date type
1. Select the [Date&Time] menu by pressing
the UP / DOWN button and press
the RIGHT button.
2. Select the desired sub menu by pressing
the UP / DOWN / LEFT / RIGHT button
and press the OK button.
RIGHT button : Selects YEAR / MONTH / DAY / HOUR / MINUTE / DATE
TYPE
LEFT button : Moves the cursor to the [Date&Time] main menu if the cursor
is at the first item of the date and time setup. In all other
instances, the cursor will be shifted to the left of its current
position.
UP/ DOWN button : Changes the value of each item.
ƃ Setting up the battery type
1. Select the [Battery Type] menu by pressing the
UP / DOWN button and press the RIGHT button.
2. Select the desired sub menu by pressing the
UP / DOWN button and press the OK button.
ƃ Setting up the language
1. Select the [Language] menu by pressing the
UP / DOWN button and press the RIGHT button.
2. Select the desired sub menu by pressing the
UP / DOWN button and press the OK button.
ƃ You can select one of 22 languages. These are listed below :
- English, Korean, French, German, Spanish, Italian, S.Chinese, T.Chinese,
Japanese, Russian, Portuguese, Dutch, Danish, Swedish, Finnish, Thai,
BAHASA(MALAY/ INDONESIAN), Arabic, Czech, Polish, Hungarian and
Turkish.
ƃ Even if the camera is restarted, the language setting will be maintained.
INFORMATION
SETUP
Date&Time
Language
Battery Type
Alkaline
Ni-MH
Back:
Set:OK
SETUP
Date&Time
Language
Battery Type
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
Back:
Set:OK
SETUP
Date&Time
Language
Battery Type
Back:
Set:OK
06/07/10
13:00
yy/mm/dd
ŝ13Ş
LCD monitor indicator
[Image & Full Status]
ں
ڻ
ڽ
ڼ
ھ
ڿ
ۀ
ہ
ۇ
ۅ
ۆ
؇
؆
؉
؈
ۄۂ ۃ
؋ ؊ڹ
ƈ The LCD monitor displays information about the shooting functions and
selections.
No. Description Icons Page
2 Battery p.9
3
Aperture Value / Shutter Speed
F2.8, 1/30 p.14
Recording mode
p.14~17
1
No. Description Icons Page
4 Continuous shot p.34
6 Self-timer p.23~24
7 Macro p.20~21
8 Metering p.34
9 Card inserted indicator -
10 Auto focus frame -
11 Camera shake warning p.17
12 Date / Time 2006/07/10 01:00 PM p.57
13 Exposure compensation p.31
14 White Balance p.30~31
15 ISO p.30
16 RGB RGB p.29
17 Sharpness p.35
18
Image quality / Frame rate
p.33
Number of available shots remaining
18 p.11
Remaining time (Movie clip/ Voice recording)
00:01:30/ 01:00:00 p.11
21 Voice memo p.17/20
22
Optical/ Digital Zoom bar/ Digital Zoom rate
p.18~19
20
19
Image size
Flash / Without Sound
p.22~23/15
5
p.33
ŝ14Ş
Starting the recording mode
ƈ How to use the PROGRAM mode ( )
Selecting the automatic mode will configure the
camera with optimal settings. You can still manually
configure all functions except the aperture value and
shutter speed.
1. Select the PROGRAM mode by rotating the mode
dial.
2. Press the menu button to configure advanced
functions such as image size (p.33), quality (p.33),
metering (p.34), continuous shooting (p.34) and
special effects (p.25).
ƈ How to use the MANUAL mode ( )
You can manually configure all functions with the
aperture value and shutter speed.
1. Select the MANUAL mode by rotating the mode
dial.
2. Press the + / - button and menu for the shutter
speed and aperture value will display.
Up / Down button : changes aperture value
Left / Right button : changes shutter speed.
3. Press the + / - button twice and take an image.
* Smaller Aperture values make the object sharp but blur the background. Larger
Aperture values make both the object and background sharp.
* High Shutter speeds can capture a moving object in a still image as if the object is
not moving. Low Shutter speeds can capture a moving object with an ‘active’
effect.
ƈ How to use the AUTO mode ( )
Please select this mode for quick and easy picture taking with minimal user
interaction.
[ AUTO mode ]
[MANUAL mode]
[ PROGRAM mode ]
ƃ If the auto focus frame turns to red when you press the shutter button down
half way, it means that the camera cannot focus on the subject. Should this
be the case, the camera is unable to capture an image clearly.
INFORMATION
1. Insert the batteries (p.9). Insert the batteries taking
note of the polarity (+ / -).
2. Insert the memory card (p.9). As this camera has a
45MB internal memory, you do not need to insert
the memory card. If the memory card is not
inserted, an image will be stored in the internal
memory. If the memory card is inserted, an image
will be stored on the memory card.
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
(If the date/ time that is displayed on the LCD
monitor is incorrect, reset the date / time before
taking a picture.)
5. Select the AUTO mode by rotating the mode dial.
6. Point the camera towards the subject and compose the image by using the
LCD monitor.
7. Press the shutter button to capture an image.
ŝ15Ş
Starting the recording mode
ƈ How to use the MOVIE CLIP mode ( )
A movie clip can be recorded for as long as the
available recording time of the memory capacity allows.
1. Select the MOVIE CLIP mode by rotating the
mode dial.
2. The MOVIE CLIP mode icon and available
recording time will display on the LCD monitor.
3. Point the camera towards the subject and compose
the image by using the LCD monitor. Press the
shutter button and movie clips are recorded for as
long as the available recording time. Movie clips will
still be recorded if the shutter button is released.
If you wish to stop recording, press the shutter button again.
* Image size and type are listed below.
- Image size : 640X480, 320X240, 160X128 (Selectable)
- File type : *.avi (MPEG-4)
ƈ Recording the movie clip without voice
You can record the movie clip without voice.
1. Press the Up button and the ( ) icon will
display on the LCD monitor.
2. Press the shutter button and movie clip is
recorded for as long as the available recording
time without voice.
3. To stop the recording, press the shutter button
again.
[ MOVIE CLIP mode ]
[ MOVIE CLIP mode ]
ƈ Pausing while recording a movie clip (Successive Recording)
This camera allows you to temporarily stop during unwanted scenes, while
recording a movie clip. Using this function, you can record your favourite scenes
into a movie clip without having to create multiple movie clips.
ƃ Using Successive Recording
1. Press the shutter button and movie clips are
recorded for as long as the available recording time.
Movie clips will still be recorded if the shutter button
is released.
2. Press the Pause button ( ) to pause recording.
Press the Pause button ( ) again to resume
the recording.
3. If you wish to stop recording, press the shutter
button again.
[Successive recording of a movie clip]
Stop:Shutter REC:/
ŝ16Ş
Starting the recording mode
[Night mode] [Portrait mode] [Children mode]
ƈ Night / Portrait / Children mode
Rotate the mode dial to select a desired mode.
- Night mode : Use this for still images at night or in other dark conditions
- Portrait mode : To take a picture of a person
- Children mode : To take a still picture of moving children
ƈ How to use the SCENE mode ( )
Use the menu to easily configure optimal settings for
a variety of shooting situations. These include
LANDSCAPE, CLOSE UP, SUNSET, DAWN,
BACKLIGHT, FIREWORKS and BEACH & SNOW
scenes.
1. Select the SCENE mode by rotating the mode
dial.
2. Press the menu button and select a desired scene
menu.
[SCENE mode]
ſThe scene modes are listed below.
[Landscape] ( ) : To take pictures of distant scenery.
[Close up] ( ) : Close-up shooting for small objects such as
plants and insects.
[Sunset] ( ) : For taking pictures of sunsets.
[Dawn] ( ) : Daybreak scenes..
[Backlight] ( ) : Portrait without shadows caused by backlight.
[FIirework] ( ) : Firework scenes.
[Beach&Snow] ( ) : For ocean, lake, beach and snowscape scenes.
ŝ17Ş
Starting the recording mode
Things to Watch Out for When Taking Pictures
ƈ How to use the VOICE RECORDING mode ( )
1. In any mode with the exception of Movie clip mode,
select the VOICE RECORDING mode by pressing the
Voice recording button twice.
2. Press the shutter button to record a voice.
- Press the shutter button once and voice is recorded
for as long as the available recording time
(Max : 1 hour) allows. The recording time will be
displayed on the LCD monitor. Voice will still be
recorded if the shutter button is released.
- If you wish to stop recording, press the shutter
button again.
- File type : *.wav
* A distance of 40cm between you and the
camera (microphone) is the best distance to
record sound.
ƈ Pressing the shutter button down half way.
Lightly press the shutter button to confirm focus and flash battery charge.
Press the shutter button all way down to take the picture.
[ Lightly press the shutter button ]
[ Press the shutter button ]
ƈ The available recording time may vary depending on shooting conditions and
camera settings.
ƈ When the Flash Off or Slow synchro mode is selected in a low lighting condition,
the camera shake warning indicator ( ) may appear on the LCD monitor. In
this case, use a tripod, support the camera on a solid surface or change to flash
shot mode.
ƈ Shooting against the light :
Please do not take pictures to the sunlight direction. Taking a picture against the
sun may make the picture dark. To take a picture against the sun, please use the
[Backlight] in the scene shooting mode (see page 16), fill-in flash (see page 23),
spot metering (see page 34), or exposure compensation (see page 31).
ƈ Avoid obstructing the lens or the flash when you capture an image.
ƈ Compose the image by using the LCD monitor.
ƈ Under certain conditions the auto focus system may not perform as expected.
- When photographing a subject that has little contrast.
- If the subject is highly reflective or shiny.
- If the subject is moving at high speed.
- When there is strong reflected light, or when the background is very bright.
- When the subject matter has only horizontal lines or the subject is very narrow
(such as a stick or flagpole).
- When the surroundings are dark.
[ VOICE RECORDING mode ]
REC:Shutter EXIT:
ŝ18Ş
Using the camera buttons to set the camera
ZOOM W / T button
ƈ The recording mode function can be set up by using the camera buttons.
ƃ Used for turning the camera’s power on / off.
ƃ If there is no operation during the specified time,
the camera's power will be turned off
automatically to save battery life.
Refer to page 56 for more information about the
auto power off function.
POWER button
ƃ Used for taking an image or recording voice in
the RECORDING mode.
ƃ In MOVIE CLIP mode :
Pressing the shutter button down fully starts the
process for recording a movie clip. Press the
shutter button once and the movie clip is
recorded for as long as the available recording
time in the memory allows. If you wish to stop recording, press the shutter button
again.
ƃ In STILL IMAGE mode
Pressing the shutter button down halfway activates the autofocus and checks
the condition of the flash. Pressing the shutter button down fully takes and stores
the image. If you select voice memo recording, the recording will start after the
camera has finished storing the image data.
Shutter button
ƃ If the menu is not displayed, this button works
as the OPTICAL ZOOM or DIGITAL ZOOM
button.
ƃ This camera has a 3X optical zoom and a 10X digital zoom function.
Using both will offer a total zoom ratio of 30X.
ƃ TELE Zoom
Optical zoom TELE : Pressing the ZOOM T button. This will zoom into the
subject i.e. the subject will appear nearer.
Digital zoom TELE : When the maximum (3X) optical zoom is selected,
pressing the ZOOM T button activates the digital zoom
software. Releasing ZOOM T button stops the digital
zooming at the required setting. Once the maximum
digital zoom (10X) is achieved, pressing the ZOOM T
button will have no effect.
[ WIDE zoom ]
[ TELE zoom ] [ Digital zoom 10X ]
Pressing
the ZOOM
T button
Pressing
the ZOOM
T button
ŝ19Ş
ZOOM W / T button
ƃ Images taken using the digital zoom may take a little longer for the camera
to process. Allow time for this to take place.
ƃ The digital zoom cannot be used in movie clip shots.
ƃ You may notice a decrease in image quality when using the digital zoom.
ƃ To view a clearer digital zoom image, press the shutter button halfway at the
maximum (3X) optical zoom position and press the zoom T button again.
ƃ The digital zoom can't be activated in the Nightscene mode, Children mode
and two scene modes (Close up, Fireworks).
ƃ Take care not to touch the lens to avoid taking an unclear image and
possibly causing camera malfunction. If the image is dim, turn the camera
power off and on again to modify the lens position.
ƃ Take care not to press the lens as this may cause a camera malfunction.
ƃ When the camera is turned on, take care not to touch the camera's moving
lens parts as this may cause the resulting image to be dim and unclear.
INFORMATION
[ TELE zoom ]
[ Optical zoom 2X ] [ WIDE zoom ]
Pressing
the ZOOM
W button
Pressing
the ZOOM
W button
[ Digital zoom 10X ]
[ TELE zoom ] [ WIDE zoom ]
Pressing
the ZOOM
W button
Pressing
the ZOOM
W button
ƃ WIDE Zoom
Optical zoom WIDE : Pressing the ZOOM W button. This will zoom out from
the subject i.e. the subject will appear farther away.
Pressing the ZOOM W button continuously will set the
camera to its minimum zoom setting i.e. the subject
appears at its farthest from the camera.
Digital zoom WIDE : When the digital zoom is in operation, pressing the
ZOOM W button will reduce the digital zooming in
steps. Releasing ZOOM W button stops digital
zooming. Pressing the ZOOM W button will reduce
the digital zoom and then it will continue to reduce the
optical zoom until the minimum setting is reached.
Optical zoom
Digital zoom
ŝ20Ş
Voice recording( ) / Voice memo( ) / UP button
Macro( ) / Down button
ƈ While the menu is showing, press the UP button to move up the sub menu.
When the menu is not displayed on the LCD monitor, the UP button operates as
the voice recording or voice memo ( ) button. You can add your voice-over to
a stored still image. Refer to page 17 for more information about the voice
recording.
ƃ Recording a voice memo
1. Rotate the MODE DIAL to select a RECORDING mode with the exception of
MOVIE CLIP mode.
2. Press the VOICE MEMO ( ) button. If the voice memo indicator is
displayed on the LCD monitor, the setting is completed.
3. Press the shutter button and take a picture. The picture is stored on the
memory card.
4. Voice memo will be recorded for ten seconds from the moment the picture is
stored. In the middle of the sound recording, pressing the shutter button will
stop the voice memo.
ƃ A distance of 40cm between you and the camera (microphone) is the best
distance to record sound.
INFORMATION
ƈ While the menu is showing, press the DOWN button to move from the main
menu to a sub menu, or to move down the sub menu. When the menu is not
showing, you can use the MACRO / DOWN button to take macro pictures. The
distance ranges are shown below. Press the Macro button until the desired
macro mode indicator displays on the LCD monitor.
ƈ Types of focus modes and focus ranges (W: Wide, T: Tele)
(Unit : cm)
Mode
Focus Type
Auto macro
( ) Normal Macro ( ) Normal
Focus range
W : 4~Infinity
T : 50~Infinity
W : 80~Infinity
T : 80~Infinity
W : 80~Infinity
T : 80~Infinity
W : 4~80
T : 50~80
Program ( )
Auto ( )
ƃ When the macro mode is selected, it is possible that camera shake will
occur. Take care not to shake the camera.
ƃ When you take a picture within 30cm in the Macro mode, select the FLASH
OFF mode.
INFORMATION
[Preparing for Voice Memo] [Recording Voice Memo]
Stop:Shutter
[Auto macro ( )][Macro ( )][Auto focus - No icon]
ŝ21Ş
Focus lockMacro( ) / Down button
ƈ Available focusing method, by recording mode
(O: Selectable , X: Not selectable, ∞: Infinity focus range)
O OOO OOO
XOOXXXO
O XXXXXX
Mode
Normal
Macro
Auto macro
Normal
Macro
Auto macro
Mode
SCENE
ū X ūū O ū O
XOXXXXX
XXXXXXX
ƈ To focus on a subject not positioned in the centre of the picture, use the focus
lock function.
ƃ Using the Focus Lock
1. Ensure the subject is in the centre of the autofocus frame.
2. Press the SHUTTER button halfway. When the green auto focus frame lights
up, it means the camera is focused on the subject. Be careful not to press the
SHUTTER button all the way down to avoid taking an unwanted picture.
3. With the SHUTTER button still pressed down only halfway, move the camera
to recompose your picture as desired, and then press the SHUTTER button
completely to take the picture. If you release your finger from the SHUTTER
button, the focus lock function will be cancelled.
1. The image to be
captured.
2. Press the SHUTTER
button halfway and
focus on the subject.
3. Recompose the picture
and fully press the
SHUTTER button.
ŝ22Ş
Flash ( ) / Left button
ƃ If you press the shutter button after selecting the Auto, Fill-in, Slow sychro
flash, the first flash fires to check the shooting condition (Flash range and
Power ratio of flash).
Do not move until the second flash fires.
ƃ Using the flash frequently will reduce the life of the battery.
ƃ Under normal operating conditions the charging time for the flash is
normally within 5.5 seconds. If the battery is weak, the charging time will be
longer.
ƃ During the continuous shot, AEB and movie clip mode, the flash function will
not operate.
ƃ Take photographs within the flash range.
ƃ The image quality is not guaranteed if the subject is too close or highly
reflective.
ƃ When taking an image in a poorly lit condtion with the flash, there may be a
white speck in the captured image. The speck is caused by the reflecting of
the flash light from the floating matters. It is not camera malfuction.
INFORMATION
ƃ Flash range (Unit : m)
ƈ When the menu is displayed on the LCD monitor,
pressing the LEFT button makes the cursor shift to
the left tab.
ƈ When the menu is not displayed on the LCD
monitor, the LEFT button operates as the FLASH
( ) button.
ƃ Selecting the flash mode
1. Rotate the MODE DIAL to select a RECORDING mode with the exception of
MOVIE CLIP mode.
2. Press the Flash button until the desired flash mode indicator displays on the
LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
WIDE TELE WIDE TELE WIDE TELE
0.8 ~ 5.0 0.8 ~ 2.8 0.3 ~ 0.8 0.5 ~ 0.8 0.3 ~ 5.0 0.5 ~ 2.8
ISO
AUTO
[Selecting the Auto flash]
Normal Macro
Auto macro
Menu tab Flash mode Description
ƃ Flash mode indicator
If the subject or background is dark, the camera flash
will operate automatically.
If a subject or background is dark, the camera flash
will work automatically and will reduce the red-eye
effect by using the red-eye reduction function.
The flash fires regardless of available light.
The intensity of the flash will be controlled, according
to the prevailing conditions. The brighter the
background or subject is, the less intense the flash
will be.
The flash will operate in conjunction with a slow
shutter speed in order to obtain the correct exposure.
When you take an image in a condition with poor
light, the camera shake warning indicator
( ) will display on the LCD monitor.
We recommend using a tripod for this function.
The flash does not fire. Select this mode when
capturing images in a place or situation where flash
photography is prohibited. When you capture an
image in a poorly lit condition, the camera shake
warning indicator ( ) will display on the LCD
monitor.
We recommend using a tripod for this function.
Auto flash
Auto &
Red eye
reduction
Fill in flash
Slow synchro
Flash off
ŝ23Ş
Flash ( ) / Left button
ƃ Available flash mode, by recording mode (O : Selectable, X : Not selectable)
XXOXXXXXXXXXXO
XOOXXOOXXXX XXX
XXOOXXXXXXXOXX
XXOXOXXXXXX XXX
OOOOOOO OOOO XOX
ƈ When the menu is displayed on the LCD monitor, pressing the Right button
makes the cursor shift to the right tab.
ƈ When the menu is not displayed on the LCD monitor, the RIGHT button
operates as the Self-timer( ) button. This function is used when the
photographer would also like to be in the image.
Self-timer( ) / Right button
ŝ24Ş
Self-timer ( ) / Right button MENU / OK button
ƈ MENU button
- When you press the MENU button, a menu related to each camera mode will
be displayed on the LCD monitor. Pressing it again will return the LCD to the
initial display.
- A menu option can be displayed when the following are selected :
MOVIE CLIP and STILL IMAGE modes. There is no menu available when the
VOICE RECORDING mode is selected.
ƈ OK button
- When the menu is displayed on the LCD monitor, this button is used for shifting
the cursor to the sub menu or for confirming data.
ƃ If you operate the Self-timer and Play mode button during the self-timer
operation, the self-timer function is cancelled.
ƃ Use a tripod to prevent the camera from shaking.
ƃ In Movie Clip mode, only the 10SEC self-timer will work.
ƃ Selecting the self-timer
1. Rotate the MODE DIAL to select a RECORDING
mode with the exception of VOICE RECORDING
mode.
2. Press the SELF-TIMER button until the desired
mode indicator displays on the LCD monitor.
A 10 second, 2 second or double self-timer icon
appears on the LCD monitor. In Movie Clip mode,
only the 10-second self-timer will work.
Ү10SEC self-timer ( )
: Pressing the shutter button will allow an interval
of 10 seconds before the image is taken.
Ү2SEC self-timer ( )
: Pressing the shutter button will allow an interval
of 2 seconds before the image is taken.
ҮDouble self-timer ( )
: A picture will be taken after about 10 seconds and 2 seconds later a
second picture will be taken. When using the flash, the 2-second self-timer
may be delayed for longer than 2 seconds depending on the flash charge
time.
3. When you press the SHUTTER button, the picture will be taken after the
specified time has elapsed.
INFORMATION
[Selecting the 10 SEC self-timer]
Pressing the MENU button
[Menu off]
[Menu on]
SIZE
3648X2736
3472X2604
3264X2448
3072X2304
2816X2112
2592X1944
Loading...