Samsung RS-H5, RSH5SBRS, RSH5SHMH, RSH5UBTS, RSH5UBBP User Manual

Refrigerator
user manual
imagine the possibilities
Thank you for purchasing a Samsung product. To receive a more complete service,
please register your product at
www.samsung.com/register
Free Standing Appliance
DA99-02318A (HM10-EN)-0.2.indd 1 2010.7.6 11:47:39 AM
2_ features
features of your new refrigerator
KEY FEATURES OF YOUR NEW REFRIGERATOR
Your Samsung Side-By-Side Refrigerator comes equipped with many space-saving, innovative storage and energy-efficient features.
• HIDDEN HINGES & DOOR SWITCH
Slick-covered hidden hinges & door switch helps Neat & Stylish square frontal view.
• CoolSelect Zone™ Drawer (Optional)
With this state of the art feature, you can select Quick Cool, Thaw or Select
buttons to quickly chill, thaw and cool items just in the CoolSelect drawer.
Select Cool or zero Zone to control the temperature of drawer.
• EASY OPENNING (Optional)
Doors can be opened easily and smoothly with this “Easy Handle”.
• BLACK CLEAR LED DISPLAY (Optional)
With luxurious black window, you can look and feel the neat & clear design.
• SOFT TOUCH TYPE HOME BAR (Optional)
With soft touch type Home Bar, just push and catch to open or close with the latch and damping
system.
• EASILY MOVABLE TRAY (Optional)
New concept tray to increase the movability with food simultaneously. Useful for
storage of desserts and cakes etc.
CENotice
This product has been determined to be in compliance with the Low Voltage Directive (2006/95/EC),
the Electromagnetic Compatibility Directive (2004/108/EC) and Energy efficiency Directive (96/57/EC)
of the European Union.
For easy future reference write the model and serial number down. You will find your model number on the left hand side wall of the refrigerator.
Model # Serial #
DA99-02318A (HM10-EN)-0.2.indd 2 2010.7.6 11:47:39 AM
safety information _3
safety information
SAFETY INFORMATION
• Before operating the appliance, please read this manual thoroughly and retain it at a safe
place near the appliance for your future reference.
• Use this appliance only for its intended purpose as described in this instruction manual.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Warnings and Important Safety Instructions in this manual do not cover all possible conditions
and situations that may occur. It is your responsibility to use common sense, caution, and care when installing, maintaining, and operating your appliance.
• Because these following operating instructions cover various models, the characteristics of
your refrigerator may differ slightly from those described in this manual and not all warning signs may be applicable. If you have any questions or concerns, contact your nearest service center or find help and information online at www.samsung.com.
Importantsafetysymbolsandprecautions:
WARNING
Hazards or unsafe practices that may result in severepersonalinjuryor death.
CAUTION
Hazards or unsafe practices that may result in minor personalinjuryor propertydamage.
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions carefully.
Unplug the power plug from the wall socket.
Make sure the machine is grounded to prevent electric shock.
Call the contact center for help.
Note.
Thesewarningsignsareheretopreventinjurytoyouandothers. Pleasefollowthemcarefully.
Afterreadingthissection,keepitinasafeplaceforfuturereference.
DA99-02318A (HM10-EN)-0.2.indd 3 2010.7.6 11:47:40 AM
4_ safety information
safety information
SEVERE WARNING SIGNS FOR TRANSPORTATION AND SITE
• When transporting and installing the appliance, care should be taken to ensure that no
parts of the refrigerating circuit are damaged.
- Refrigerant leaking from the pipe work could ignite or cause an eye injury. If a leak is detected, avoid any naked flames or potential sources of ignition and air the room in which the appliance is standing for several minutes.
• In order to avoid the creation of a flammable gas-air mixture if a leak in the refrigerating
circuit occurs, the size of the room in which the appliance may be sited depends on the amount of refrigerant used.
• Never start up an appliance showing any signs of damage. If in doubt, consult your dealer.
The room where the refrigerator will be sited must be 1m³ in size for every 8g of R600a refrigerant inside the appliance. The amount of refrigerant in your particular appliance is shown on the identification plate inside the appliance.
SEVERE WARNING SIGNS FOR INSTALLATION
•
Do not install the refrigerator in a damp place or place where it may come in contact with water.
- Deteriorated insulation of electrical parts may cause an electric shock or fire.
• Do not place this refrigerator in direct sunlight or expose to the heat from stoves, room
heaters or other appliance.
• Do not plug several appliances into the same multiple power board.
The refrigerator should always be plugged into its own individual electrical which has a voltage rating that matched the rating plate.
- This provides the best performance and also prevents overloading house wiring circuits, which could cause a fire hazard from overheated wires.
• If the wall socket is loose, do not insert the power plug.
- There is a risk of electric shock of fire.
• Do not use a cord that shows cracks or abrasion damage along its length or at either end.
• Do not bend the power cord excessively or place heavy articles on it.
• Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and
pull straight out from the outlet.
- Damage to the cord may cause short-circuit, fire and/or electric shock.
• Do not use aerosols near the refrigerator.
- Aerosols used near the refrigerator may cause an explosion or fire.
• This refrigerator must be properly installed and located in accordance with the manual
before it is used.
• After unpacking, keep the packing materials out of reach of children.
- There is a risk of death from suffocation if children put them over their head.
• Connect the power plug in proper position with the cord hanging down.
- If you connect the power plug upside down, wire can get cut off and cause fire or electric shock.
• Make sure that the power plug is not squashed or damaged by the back of the refrigerator.
• When moving the refrigerator, be careful not to roll over or damage the power cord.
- This constitutes a fire hazard.
• The appliance must be positioned so that the plug is accessible after installation.
• The refrigerator must be grounded.
WARNING
WARNING
DA99-02318A (HM10-EN)-0.2.indd 4 2010.7.6 11:47:40 AM
safety information _5
safety information
- You must ground the refrigerator to prevent any power leakages or electric shocks caused by current leakage from the refrigerator.
• Never use gas pipes, telephone lines or other potential lightening rods as ground.
- Improper use of the ground plug can result in electric shock.
• If the power cord is damaged, have it replaced immediately by the manufacturer or its
service agent.
• The fuse on the refrigerator must be changed by a qualified technician or service company.
- Failing to do so may result in electric shock or personal injury.
CAUTION SIGNS FOR INSTALLATION
• Allow sufficient space to install the refrigerator on a flat surface.
- If your refrigerator is not level, the internal cooling system may not work correctly.
• Keep ventilation opening in the appliance enclosure or mounting structu re clear of
obstruction.
• Allow the appliance to stand for 2 hours after installation.
SEVERE WARNING SIGNS FOR USING
• Do not insert the power plug with wet hands.
• Do not store articles on the top of the appliance.
- When you open or close the door, the articles may fall and cause personal injury and/or material damage.
• Do not put items filled with water on the refrigerator.
- If spilled, there is a risk of fire or electric shock.
• Do not let children hang on the door.
- Failure to do so may cause serious personal injury.
• Do not leave the doors of the refrigerator open while the refrigerator is unattended and do
not let children enter inside of the refrigerator.
- There is a risk of children entrapment and serious personal injury because of low temperature.
• Do not insert your hands into the bottom area under the appliance.
- Any sharp edges may cause personal injury.
• Do not let children step on drawer’s cover.
- It may break and cause slip hazard.
• Do not overfill the refrigerator with food.
-
When you open the door, an item may fall out and cause personal injury or material damage.
• Never put fingers or other objects into the dispenser hole.
- Failure to do so may cause personal injury or material damage.
• Do not store volatile or flammable substances such as benzene, thinner, alcohol, ether or
LP gas in the refrigerator.
- The storage of any of such products may cause explosions.
• Do not store low temperature-sensitive pharmaceuticals products, scientific materials or
other low temperature-sensitive products in the refrigerator.
- Products that require strict temperature controls must not be stored in the refrigerator.
• Do not place or use electrical appliance inside the refrigerator, unless they are of a type
recommended by the manufacturer.
• Do not use a hair dryer to dry the inside of the refrigerator. Do not place a lighted candle in
the refrigerator for removing bad odors.
- This may result in electric shock or fire.
•
Do not touch the inside walls of the freezer or products stored in the freezer with wet hands.
CAUTION
WARNING
DA99-02318A (HM10-EN)-0.2.indd 5 2010.7.6 11:47:40 AM
6_ safety information
safety information
- This may cause frostbite.
• Do not use mechanical devices or any other means to accelerate the defrosting process,
other than those recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• This product is intended only for the storage of food in a domestic environment.
• Bottles should be stored tightly together so that they do not fall out.
• If a gas leak is detected, avoid any naked flames or potential sources of ignition and air the
room in which the appliance is standing for several minutes.
• Use only the LED Lamps provided by manufacturer or service agents.
• Children should be supervised to ensure that they do not play with and/or climb into the
appliance.
• Do not disassemble or repair the refrigerator by yourself.
- You run risk of causing a fire, malfunction and/or personal injury. In case of malfunction, please contact your service agents.
• Pull the power plug out of the socket before changing the interior lamps of the refrigerator.
- Otherwise, there is a risk of electric shock.
• If the appliance generates a strange noise, a burning or smell or smoke, unplug the power
plug immediately and contact your nearest service center.
- Failing to do so may result in electric or fire hazards. Keep ventilation opening in the appliance enclosure or mounting structure clear of obstruction.
• If you experience difficulty when changing the light, contact service agents.
• If the products equipped with LED Lamp, do not disassemble Lamp Cover and LED Lamp
by yourself.
- Please contact your service agents.
• If any dust or water is in refrigerator, pull out power plug and contact your Samsung
Electronics service center.
- There is a risk of fire.
DA99-02318A (HM10-EN)-0.2.indd 6 2010.7.6 11:47:40 AM
safety information _7
safety information
CAUTION SIGNS FOR USING
• If the refrigerator is disconnected from the power supply, you should wait for at least five
minutes before plugging it back in.
• If you will be away for more than three weeks or the refrigerator will not be used for a long
period of time, you must empty and clean the refrigerator and pull out the power plug. Wipe excess moisture from the inside and leave the doors open.
- Otherwise, odor and mold may develop.
- Deterioration in the insulation may cause fire.
• If you have a long vacation or business trip and won’t use water or ice dispensers, close
the water valve.
- Otherwise, water leakage may occur.
• To get best performance of product,
- Do not place foods too closely in front of the vents at the rear of the appliance as it can obstruct free air circulation in the refrigerator compartment.
-
Wrap the food up properly or place it in airtight containers before put it into the refrigerator.
• Do not re-freeze frozen foods that have thawed completely.
• Do not place carbonated or fizzy drinks in the freezer compartment. Do not put bottles or
glass containers in the freezer.
- When the contents freeze, the glass may break and cause personal injury and property damage.
• Do not change the functionality of or modify the refrigerator.
- Changes or modifications may result in personal injury and/or property damage. Any changes or modifications performed by a 3rd party on this completed appliance is neither covered under Samsung warranty service, nor is Samsung responsible for safety issues and damages that result from 3rd party modifications.
• Do not block air holes.
-
If the air holes are blocked, especially with a plastic bag, the refrigerator can be over cooled. If this cooling period lasts too long, the water filter may break and cause water leakage.
- Do not put any newly introduced food for freezing near to already food.
• Please observe maximum storage times and expiry dates of frozen goods.
• Fill water tank, ice tray, water cubes only with potable water.
• Do not place food inside the refrigerator in a haphazard way.
- The food will not cool properly.
• In case the model has Cool Select Zone, do not insert a shell to this rail, or the shelf can
collide with beverage station cover and the beverage station cover can be broken.
•Use only the ice maker provided with the refrigerator. •The water supply to this refrigerator must only be installed/connected by a suitably qualified
person and connect to a potable water supply only.
•
In order to operate the ice maker properly, water pressure of 138 ~ 862kpa(1.4~8.8kgf/cm3) is required.
•
If the appliance is flooded, cut the power immediately and contact your nearest service center.
CAUTION SIGNS FOR CLEANING AND MAINTENANCE
• Do not directly spray water inside or outside the refrigerator.
- There is a risk of fire or electric shock.
• Do not spray inflammable gas near the refrigerator.
- There is a risk of explosion or fire.
CAUTION
CAUTION
DA99-02318A (HM10-EN)-0.2.indd 7 2010.7.6 11:47:40 AM
8_ safety information
safety information
• Do not spray cleaning products directly on the display.
- Printed letters on the display may come off.
•
Remove any foreign matter or dust from the power plug pins. But do not use a wet or damp cloth when cleaning the plug, remove any foreign material or dust from the power plug pins.
- Otherwise there is a risk of fire or electric shock.
• Never put fingers or other objects into the dispenser hole and ice chute.
- It may cause personal injury or material damage.
• Unplug the refrigerator before cleaning and performing maintenance.
SEVERE WARNING SIGNS FOR DISPOSAL
• Ensure that none of the pipes on the back of the appliance are damaged prior to disposal.
• R600a or R134a is used as a refrigerant. Check the compressor label on the rear of the
appliance or the rating label inside the refrigerator to see which refrigerant is used for your refrigerator. When this product contains flammable gas (Refrigerant R600a), contact your local authority in regard to safe disposal of this product. Cyclopentane is used as a insulation blowing gas. The gases in insulation material require special disposal procedure. Please contact your local authorities in regard to the environmentally safe disposal of this product. Ensure that none of the pipes on the back of the appliances are damaged prior to disposal. The pipes shall be broke in the open space.
• If the appliance c ont ains iso-bu tan e refrig era nt (R600a), a natural gas with high
environmental compatibility that is, however, also combustible. When transporting and installing the appliance, care should be taken to ensure that no parts of the refrigerating circuit are damaged.
• When disposing of this product or other refrigerators, remove the door/door seals, door
latch so that small children or animals cannot become trapped inside. Leave the shelves in place so that children may not easily climb inside. Children should be supervised to ensure that they do not play with the old appliance.
•
Please dispose of the packaging material for this product in an environmentally friendly manner.
ADDITIONALTIPSFORPROPERUSAGE
• In the event of a power failure, call the local office of your Electricity Company and ask how
long it is going to last.
- Most power failures that are corrected within an hour or two will not affect your refrigerator temperatures. However, you should minimize the number of door openings while the power is off.
- Should the power failure last more than 24 hours, remove all frozen food.
• If keys are provided with the refrigerator, the keys should be kept out of the reach of
children and not in vicinity of the appliance.
• The appliance might not operate consistently (possibility of temperature becoming too
warm in refrigerator) when sited for an extended period of time below the cold end of the range of temperature for which the refrigerating appliance is designed.
• Do not store food which spoils easily at low temperature, such as bananas, melons.
• Your appliance is frost free, which means there is no need to manually defrost your
appliance, as this will be carried out automatically.
• Temperature rising during the defrost can comply with ISO requirement. But if you want to
prevent an undue rise in the temperature of the frozen food while defrosting the appliance, please wrap the frozen food in several layers of newspaper.
• Any increase in temperature of frozen food during defrosting can shorten its storage life.
WARNING
DA99-02318A (HM10-EN)-0.2.indd 8 2010.7.6 11:47:40 AM
SETTING UP YOUR SIDE-BY-SIDE
REFRIGERATOR
10
10 Getting ready to install the refrigerator 11 Removing the refrigerator doors 14 Reattaching the refrigerator doors 17 Levelling the refrigerator
SETTING UP YOUR SIDE-BY-SIDE
REFRIGERATOR
18
18 Making minor adjustments to the doors 19 Checking the water dispenser line(optional) 19 Installing the water dispenser line
OPERATING THE SAMSUNG
SIDE-BY-SIDE REFRIGERATOR
24
24 Setting up the refrigerator 25 Operating the refrigerator 26 Using the digital display 27 Controlling the temperature 28 Using the ice and cold water dispenser 29 Shelves and bins 30 Storing food 32
Using the CoolSelect Zone™ Drawer (Optional) 34 Removing the freezer accessories 35 Removing the refrigerator accessories 36 Cleaning the refrigerator 38 Changing the interior lights 38 Changing the water filter 39 Using the doors
TROUBLESHOOTING
40
contents _9
contents
DA99-02318A (HM10-EN)-0.2.indd 9 2010.7.6 11:47:41 AM
10_ setting up
25mm
25mm
at least 50mm
at least 50mm
setting up your side-by-side refrigerator
GETTING READY TO INSTALL THE REFRIGERATOR
Congratulations on the purchase of your Samsung Side-By-Side Refrigerator. We hope you will enjoy the many state-of-the-art features and efficiencies that this new appliance has to offer.
Selecting the best location for the refrigerator
• Select a location with easy access to the water supply.
• Select a location without direct exposure to sunlight.
• Select a location with level (or nearly level) ooring.
• Select a location with enough space for the refrigerator doors to open easily.
• Allow sufcient space to the right, left, back and top for air circulation.
- If your refrigerator is not level, the internal cooling system may not work correctly.
- Overall space required in use. Refer to drawing and dimension as below.
• Please ensure that appliance can be moved freely in the event of maintenance & service.
Whenmovingyourrefrigerator
To prevent floor damage be sure the front levelling legs are in the up position (above the floor). Refer to ‘Levelling the refrigerator’ in the manual (at page 17).
To protect the finish of the flooring, place the protection sheet such as packing carton under the refrigerator.
When installing, servicing or cleaning behind the refrigerator, be sure to pull the unit straight out and push back in straight after finishing.
Leg
Screw Driver
CAUTION
DA99-02318A (HM10-EN)-0.2.indd 10 2010.7.6 11:47:42 AM
setting up _11
01 SETTING UP
REMOVING THE REFRIGERATOR DOORS
If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors.
1. Removing the Front Leg Cover
First, open both the freezer and refrigerator doors, and then take off the front leg cover by removing the three screws counter-clockwise.
1
2
Separating the Water Supply Line from the Refrigerator
1. Remove the water line by pressing the coupler 1 and pulling the water line 2 away.
Do not cut the water line. Gently separate it from the coupler.
DA99-02318A (HM10-EN)-0.2.indd 11 2010.7.6 11:47:44 AM
12_ setting up
3
4
5
2
1
setting up your side-by-side refrigerator
2. Removing the freezer door
A few things to mention first.
• Make sure that you lift the door straight up so the hinges are not bent or broken.
• Be careful not to pinch the water tubing and wire harness on the door.
• Place doors on a protected surface to prevent scratching or damage.
1. With the Freezer door closed, remove the upper hinge cover
1
using a screwdriver, and then
disconnect the wires by gently pulling them apart
2
.
7
6
Be careful not to pinch the water tubing and wire harness on the door.
2. Remove hinge screws 3 and the ground screw 4 by turning counter-clockwise, and take off the upper hinge
5
. Be careful that the door does not fall on you as you are removing it
3. Next, remove the door from the lower hinge
6
by carefully lifting the door straight up 7.
4. Remove the lower hinge
8
using a hex wrench.
DA99-02318A (HM10-EN)-0.2.indd 12 2010.7.6 11:47:47 AM
setting up _13
01 SETTING UP
3. Remove the door from the lower hinge 5 by lifting the door straight up 6.
Removing the Fridge Door
1. With the door closed, remove the upper hinge cover 1 using a screwdriver.
2. Remove hinge screws
2
and the ground screw 3 by turning counter-clockwise, and take off
the upper hinge
4
. Be careful that the door does not fall on you as you are removing it
4
2
3
1
4. Remove the lower hinge 7 from the bracket 8 by gently lifting the lower hinge upwards.
DA99-02318A (HM10-EN)-0.2.indd 13 2010.7.6 11:47:49 AM
14_ setting up
setting up your side-by-side refrigerator
REATTACHING THE REFRIGERATOR DOORS
Once you have safely placed your refrigerator where you plan for it to stay, it is time to put the doors back on.
Reattaching the Freezer Door
1. Replace the freezer door by inserting the water line 1 back into the lower corner of the door and then into the hole on the lower hinge
2
. Gently pull the water line back down so that it runs straight, with no kinks or bends.
2. Insert the upper hinge shaft
3
into the hole on the corner of the
freezer door
4
. Make sure the hinge is level between the upper
hinge hole
5
and the hole of the cabinet 6 and reattach the
hinge screws
7
and ground screw 8 by turning in a clockwise
direction.
3. Reconnect the wires.
4. Place the front part of the upper hinge cover
9
on the front of the upper hinge 10 and reattach
with the screw.
1
2
10
9
4
5
6
7
8
3
DA99-02318A (HM10-EN)-0.2.indd 14 2010.7.6 11:47:50 AM
setting up _15
01 SETTING UP
Reattaching the Fridge Door
1. Insert the lower hinge 1 back into the lower hinge bracket 2.
2. Fit the hole in the corner of the fridge door 3 over the lower hinge 4.
3. Insert the upper hinge shaft
5
into the hole on the hinge
6
. Make sure the hinge is level between the upper hinge
hole
7
and the hole on the top of the cabinet 8. Then,
reattach hinge screws
9
and the ground screw 10 by
turning it in a clock wise direction.
4. Place the front part of the upper hinge cover
11
on the front of the upper hinge 12 and
reattach it with the screw.
1
2
3
4
12
11
DA99-02318A (HM10-EN)-0.2.indd 15 2010.7.6 11:47:51 AM
16_ setting up
setting up your side-by-side refrigerator
Reattaching the Water Supply Line
1. Insert the water line 1 into the coupler
2
.
Reattaching the Front Leg Cover
Before attaching the cover, check water connector for leakage. Replace the front leg cover by turning the three screws clockwise, as shown in the figure.
Front Leg Cover
Screw
2
1
DA99-02318A (HM10-EN)-0.2.indd 16 2010.7.6 11:47:54 AM
setting up _17
01 SETTING UP
Screw Driver
Leg
Leg
Screw Driver
LEVELING THE REFRIGERATOR
Now that the doors are back on the refrigerator, you will want to make sure the refrigerator is level so you can then make final adjustments. If the refrigerator is not level, it will not be possible to get the doors perfectly even.
The front of the refrigerator is also adjustable.
When the Freezer door is lower than the fridge
Insert a flat-blade screwdriver into a notch on the Leg, turn it clockwise or counter clockwise to level the freezer.
When the Freezer door is higher than the fridge
Insert a flat-blade screwdriver into a notch on the Leg, turn it clockwise or counter clockwise to level the fridge.
Refer to the next section for the best way to make very minor adjustments to the doors.
DA99-02318A (HM10-EN)-0.2.indd 17 2010.7.6 11:47:55 AM
18_ setting up
In the process for adjusting both the door is same. Open the doors and adjust them, one at a time, as follows:
1. Unscrew the nut
1
from the lower hinge until it reaches the upper end of the bolt 2.
When you release the nut
1
, make sure that you use the Allen wrench provided 3 to loosen
the bolt
2
in a counter-clockwise direction. You should then be able to unscrew the nut 1 with
your fingers.
2. Adjust the height difference between the doors by turning the bolt
2
clockwise or counter
clockwise
.
When you turn clockwise
, the door will move up.
3
2
1
Wrench
Bolt
Nut
3
2
Wrench
Bolt
setting up your side-by-side refrigerator
MAKING MINOR ADJUSTMENTS TO THE DOORS
Remember, a levelling refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on levelling the refrigerator.
Adjustment part
When the door of the freezer is higher than the fridge
DA99-02318A (HM10-EN)-0.2.indd 18 2010.7.6 11:47:57 AM
setting up _19
01 SETTING UP
3. After adjusting the doors, turn the nut 1 clockwise until it reaches the lower end of the bolt, then tighten the bolt again with the wrench
3
to fix the nut in place 1.
If you do not secure the nut firmly, the bolt may release.
CloseMain Waterpipe
CloseMain
Waterpipe
NOGAP
3
2
1
Wrench
Bolt
Nut
CHECKING THE WATER DISPENSER LINE (OPTIONAL)
A water dispenser is just one of the helpful features on your new Samsung refrigerator. To help promote better health, the Samsung water filter removes unwanted particles from your water. However, it does not sterilize or destroy microorganisms. You will need to purchase a water purifying system to do that. In order for the icemaker to operate properly, water pressure of 138 ~862 Kpa is required. Under normal conditions, a 170 cc paper cup can be filled in 10 seconds. If the refrigerator is installed in an area with low water pressure (below 138 Kpa), you can install a booster pump to compensate for the low pressure. Make sure the water storage tank inside the refrigerator is properly filled. To do this, press the water dispenser lever until the water runs from the water outlet.
Water Line installation Kits are included with. You can find it in one of the freezer drawer.
INSTALLING THE WATER DISPENSER LINE
ForInteriormodel
Parts for water line Installation
1

Waterlinexerand screws
2
Pipeconnector
3

Waterline
4

WaterFilter
Connecting to the water supply line
1. first, shut off the main water supply line.
2. locate the nearest cold, drinking water line.
3. follow the Water line Installation Instructions in the installation kit.
CAUTION
The water line must be connected
to the cold water pipe. If it is connected
to the hot water pipe, it may cause the
purifier to malfunction.
4. After connecting the water supply to the water filter, turn your main water supply back on and dispense about 1l to clear and prime the water filter.
DA99-02318A (HM10-EN)-0.2.indd 19 2010.7.6 11:48:0 AM
20_ setting up
CAUTION
setting up your side-by-side refrigerator
Connecting the water line to the refrigerator
1. Remove the dust cap from the water line on the rear of the unit and fit a compression nut from the install kit.
2. Remove the water pipe from the install kit and fit a compression nut to one end.
3. Join the two pipes together using the compression joint from the install kit ensuring that the joint is water tight.
4. Join the other end of the install pipe to the main water supply and turn on the water to check for leaks.
Only connect the water line to a drinkable water source. If you have to repair or disassemble the water line, cut off 6.5mm of the plastic tubing to make sure you get a snug, leak-free connection.
Before being used, the leakage in these places should be examined
• Samsung Warranty does not cover WATER LINE INSTALLATION.
• The cost of connection to a water supply is at the customer expense, unless included in the
delivery charge (refer to the delivery agreement with the seller)
• Please contact Plumber or Authorised Installer for the installation if needed.
• If Water leakage occurs due to improper installation, Please contact installer.
Remove
cap
WaterLine
fromunit
WaterLine
fromKit
Nogap
Loosena
DA99-02318A (HM10-EN)-0.2.indd 20 2010.7.6 11:48:2 AM
setting up _21
01 SETTING UP
INSTALLING THE WATER DISPENSER LINE
ForExteriormodel
Parts for water line Installation
Connecting to the water supply line
Connect the water pipe with coupler and tap.
1. Close the main water tap.
2. Connect coupler “A” to the tap.
CAUTION
The water line must be connected to the cold
water pipe. If it is connected to the hot water pipe, it may cause the purifier to malfunction.
Waterlinexerand
screws
Pipe
connector
Waterline
Purier
Purierlock-clip
WARRANTYINFORMATION
This water line installation is not covered by the refrigerator or ice maker manufacturer’s warranty. Follow these instructions carefully to minimise the risk of expensive water damage.
Note:
If the coupler does not fit on the current tap, go the nearest authorised service dealer and purchase the right couplers fittings.
COUPLER “A”
TA P
COUPLER
SIDE OF
PURIFIER
WATER INLET SIDE OF PURIFIER
LINE OUTLET
90degree
PURIFIER WATER
select the location where the purifier is to install. (Model with the purifier)
- If you wish to reassemble the water inlet
and outlet sides of the purifier during purifier installation, see the reference illustration.
- Cut the water line attached to the purifier to the
appropriate place after measuring the distance between the purifier and the cold water tap.
Replacement Instructions
1. Shut off water supply.
2. Note the Flow direction on the filter.
3. Insert water supply tube into the inlet side of the filter until the tube stop.
4. After inserting tube, put together the clip strongly. The Clip fix the tube.
5. Turn on the water and check for leaks. If leaks occur, repeat step 1,2,3,4. If leaks persist,
discontinue use and call your supporting dealer.
6. Flush filter for 5 minutes before use.
WATER SUPPLY
INLET SIDE
PERMEAT
FLOW DIRECTION
Note:You must also ensure that the cut is square and not at
any sort of angle as this could cause a leak
CAUTION
Locking Clip
Insert Locking Clip After tube seated
DA99-02318A (HM10-EN)-0.2.indd 21 2010.7.6 11:48:4 AM
22_ setting up
setting up your side-by-side refrigerator
Remove any residual matter inside the purifier. (Model with the purifier)
- Open the main water tap to check whether water
is running through the water tube on the water inlet side of the purifier.
- If water does not come out through the line, check
whether the tap is open.
- Leave the tap open until clean water is running
out and any residual matter that built up during manufacturing has been removed.
WATER LINE
PURIFIER
WATER
OUTLET SIDE
OF PURIFIER
Secure the water line.
- Using clip ”A”, fix the water line to the wall (the back of refrigerator).
- When the water line is secure, make sure whether the water line is not
excessively bent, pinched or squashed.
CLIP A
WATER LINE
Connect the water line to the refrigerator.
- Remove the compressor cover of the refrigerator.
- Connect the water line to the valve, as shown in the figure.
- When connected, check if there is any leakage.
If any, repeat the connection.
- Reattach the compressor cover of the refrigerator.
WATER LINE
INSTRUCTIONS COMPRESSOR COVER OF REFRIGERATOR
CONNECTION NUT
Attach the purifier lock-clip.
- Hold the purifier lock-clip in the appropriate position
(under the sink for example) and fix it tightly into place where to screw.
PURIFIER LOCK-CLIP
Secure the purifier in position.
- Fix the purifier in position, as shown in the figure on the right.
WATER TUBE
PURIFIER LOCK-CLIP
PURIFIER
DA99-02318A (HM10-EN)-0.2.indd 22 2010.7.6 11:48:6 AM
setting up _23
01 SETTING UP
Removing any residual matter inside the water supply line after installing filter.
1. Turn ON the main water supply & turn OFF the valve to the
water supply line.
2. Run water through the dispenser until the water runs clear
(approx. 1L). This will clean the water supply system and remove air from the lines.
3. Additional flushing may be required in some households.
4. Open the refrigerator door and make sure there are no water
leaks coming from the water filter.
A newly installed water filter cartridge may cause water to briefly spurt from the water dispenser. This is due to air getting into the line. It should pose no problem to operation.
Check the amount of water supplied to the ice tray. (Optional)
1. Lift up the icemaker bucket and gently pull out of the freezer.
2. When you press the Test button for 3 seconds, the ice cube container is filled with water from
the water supply tap after ice tray is twisted. Check to make sure the amount of water is correct (see the illustration below).
If the water level is too low, the ice cubes will be small. This is a water pressure problem from
with in the main water pipes, not the refrigerator.
Ice maker
1
Feeler Arm
2
Test button
Check the water level
DA99-02318A (HM10-EN)-0.2.indd 23 2010.7.6 11:48:7 AM
24_ operating
operating the SAMSUNG side-by-side refrigerator
SETTING UP THE REFRIGERATOR
Now that you have your new refrigerator installed and in place, you are ready to set up and enjoy the full features and functions of the appliance. By completing the following steps, your refrigerator should be fully operational. If not, first check the power supply and electricity source or try the troubleshooting section at the back of this user guide. If you have any further questions, contact your Samsung Electronics service center.
1. Place the refrigerator in an appropriate location with reasonable clearance between the wall and the refrigerator. Refer to installation instructions in this manual.
2. Once the refrigerator is plugged in, make sure the interior light comes on when you open the doors.
3. Set the temperature control to the coldest temperature and wait for an hour.
The freezer should get slightly chilled and the motor should run smoothly.
4. After powering the refrigerator, it will take a few hours to reach the appropriate temperature.
Once the refrigerator temperature is sufficiently cool, you can store food and drink in the
refrigerator.
Saving Energy Tips
- Install the appliance in a cool, dry room with adequate ventilation. Ensure that it is not exposed to direct sunlight and never put it near a direct source of heat (radiator, for example).
- Never block any vents or grilles on the appliance.
- Allow warm food to cool down before placing it in the appliance.
- Put frozen food in the refrigerator to thaw. You can then use the low temperatures of the frozen products to cool food in the refrigerator.
- Do not keep the door of the appliance open for too long when putting food in or taking food out. The shorter time for which the door is open, the less ice will form in the freezer.
- Clean the rear of the refrigerator regularly. Dust increases energy consumption.
- Do not set temperature colder than necessary.
- Ensure sufficient air exhaust at the refrigerator base and at the back wall of the refrigerator. Do not cover air vent openings.
- Allow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower.
DA99-02318A (HM10-EN)-0.2.indd 24 2010.7.6 11:48:8 AM
operating _25
02 OPERATING
POWERFREEZE BUTTON
Speeds up the time needed to freeze products in the freezer. This can be helpful if you need to quickly freeze items that spoil easily or if the temperature in the freezer has warmed dramatically (For example, if the door was left open).
FREEZERBUTTON
Press the Freezer button to set the freezer to your desired temperature, You can set the temperature between -14°C (8°F) and -25ºC (-14°F).
ICETYPEBUTTON
Use this button to choose Cubed, Crushed or to turn the Ice feature off.
FILTERCHANGE BUTTON
When you change the filter, press this button for 3 seconds to reset the filter schedule.
VACATIONBUTTON
If you are going on vacation or business trip or you do not need to use the refrigerator, press the Vacation button.
When you select vacation button for fridge compartment off,
display LED of Vacation will be on.
It is strongly requested to remove foods in the fresh-food compartment and do not leave the door open when you select Vacation function.
CHILDLOCK FUNCTION
By pressing the Vacation button and the Fridge button simultaneously for 3 seconds, all buttons will be locked. The Water dispenser lever and the Ice lever will not work either. To cancel this function, Press these two buttons for 3 seconds again.
FRIDGEBUTTON
Press the Fridge button to set the fridge to your desired temperature. You can set temperature between 1°C and 7°C (34°F and 45°F).
OPERATING THE REFRIGERATOR
USING THE CONTROL PANEL
1
2
3
4
5
6
7
5
6
7
1
3
4
2
RSH5Z/K/Y/J***
RSH5P/F/U/D***
RSH5V/B/S/N***
DA99-02318A (HM10-EN)-0.2.indd 25 2010.7.6 11:48:9 AM
26_ operating
operating the SAMSUNG side-by-side refrigerator
USING THE DIGITAL DISPLAY
“88” segment on Freezer part indicates the current Freezer temperature. “88” segment on Fridge part indicates the current Fridge temperature. “Quick Cool”, “Thaw”, and “zero Zone” indicates the status of the CoolSelect Zone™ Drawer.
When not in use the temperature display will turn off, this is normal.
Power Freeze
This icon will light up when you activate the “Power freeze” feature. “Power freeze” is great for times when you need a lot of ice. Press the Power freeze button and ice production will increase. When you have enough, just press the button again to cancel the “Power freeze” mode.
When you use this function the energy consumption of the refrigerator will increase. Remember to turn it off when you don’t need it and return the freezer to your original temperature setting. If you need to freeze large amount of food stuff, set the temperature of freezer compartment as the coldest temperature before you turn on the Power Freeze Button.
RSH5Z/K/Y/J***
RSH5P/F/U/D***
RSH5V/B/S/N***
DA99-02318A (HM10-EN)-0.2.indd 26 2010.7.6 11:48:10 AM
operating _27
02 OPERATING
Filter Indicator
When the filter indicator light is on, it is time to change the filter. Typically this happens about every 6 months. After removing the old water filter and installing a new one (see page 38 for instructions on how to do this), reset the indicator status light by pressing the Ice Type button for about 3 seconds. The indicator will light again in about 6 months to let you know it is time to change your water filter. When you do not use the water filter, press the Ice Type button for more than 5 seconds, the Filter indicator lamp and the Filter Change letters will be off.
Child Lock
This icon will light up when you activate the Child Lock function by pressing the Vacation button and the Fridge button simultaneously for 3 seconds. Press these two buttons for 3 seconds again to reactivate.
Ice type
Cubed Ice, Crushed Ice and turnning the Ice maker off.
Enjoy cubed or crushed ice by selecting your preference from the digital control panel. If you don’t need ice, turn the feature off to save on water and energy consumption. The Ice type light indicates the type of ice (or no ice) that is currently chosen.
CONTROLLING THE TEMPERATURE
CONTROLLING THE FREEZER TEMPERATURE
The freezer temperature can be set between -14°C (8°F) and -25ºC (-14°F) to suit your particular needs. Press the Freezer button repeatedly until the desired temperature is shown in the temperature display. Keep in mind that foods like ice cream may melt at -16ºC (4°F). The temperature display will move sequentially from -14°C (8°F) and -25ºC (-14°F). When the display reaches -14ºC (8°F), it will begin again at -25ºC (-14°F). Five seconds after the new temperature is set the display will again show the actual current freezer temperature. However, this number will change as the Freezer adjusts to the new temperature.
CONTROLLING THE FRIDGE TEMPERATURE
The refrigerator temperature can be set between 7ºC (46°F) and 1ºC (34°F) to suit your particular needs. Press the Fridge button repeatedly until the desired temperature is shown in the temperature display. The temperature control process for the Fridge works just like the Freezer process. Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin tracking towards the newly set temperature. This will be reflected in the digital display.
The temperature of the freezer or the refrigerator may rise from opening the doors too frequently, or if a large amount of warm or hot food is placed in either side. This may cause the digital display to blink. Once the freezer and refrigerator return to their normal set temperatures the blinking will stop. If the blinking continues, you may need to “reset” the refrigerator. Try unplugging the appliance, wait about 10 minutes and then plug back in.
DA99-02318A (HM10-EN)-0.2.indd 27 2010.7.6 11:48:10 AM
28_ operating
operating the SAMSUNG side-by-side refrigerator
USING THE ICE AND COLD WATER DISPENSER
Press the Ice Type button to select the type of ice you want
Ice is made in cubes. When you select “Crushed”, the icemaker grinds the ice cubes into crushed ice.
Dispensing ice
Place your glass underneath the ice outlet and push gently against the ice dispenser lever with your glass. Make sure the glass is in line with the dispenser to prevent the ice from bouncing out.
Using the Water Dispenser
Place a glass underneath the water outlet and push gently against the water dispenser lever with your glass. Make sure the glass is in line with the dispenser to prevent the water from splashing out.
• Do not put your ngers, hands or any other unsuitable objects in the chute or ice-maker
bucket.
- It may result in personal injury or material damage.
• Never put nger or any other objects in the dispenser opening.
- It may cause injury.
• Use only the ice maker provided with the refrigerator.
• The water supply to this refrigerator must only be installed/connected by a suitably
qualified person and connect to a potable water supply only.
• In order to operate the ice maker properly, water pressure of 138 ~ 862 Kpa is required.
• If you have a long vacation or business trip and won’t use water or ice dispensers, close
the water valve.
- Otherwise, water leakage may occur.
• Wipe excess moisture from the inside and leave the doors open.
- Otherwise, odor and mold may develop.
WARNING
CAUTION
NoIce
Select this if you want to turn off the icemaker
Push
Push
DA99-02318A (HM10-EN)-0.2.indd 28 2010.7.6 11:48:12 AM
operating _29
02 OPERATING
Ice Maker Bucket (Optional)
Door Bins
Ice Chute
Lamp Cover
Glass Shelves
Plastic Shelf
Drawers
Front Leg Cover
SHELVES AND BINS
Freezer
Vegetable &Fruit
Drawers
Dairy Bin
Z Shelf(Optional)
Water Filter (Optional)
Lamp Cover
Glass Shelf
Door Bins
CoolSelect Zone Drawer(Optional)
Wine Shelf(Optional)
Moving Shelf(Optional)
Egg Tray
Fridge
Beverage Station (Optional)
DA99-02318A (HM10-EN)-0.2.indd 29 2010.7.6 11:48:14 AM
30_ operating
1
2
3
4
12
5
11
6
9
10
13
8
7
operating the SAMSUNG side-by-side refrigerator
STORING FOOD
Storing Food in the Freezer
The Samsung Side-By-Side Refrigerator has been designed to provide you with maximum spacesaving features and functions. Here are some of the customised compartments we have created to keep your food fresher, longer. Remember, in order to prevent odour penetration to the ice, stored food should be wrapped securely and as airtight as possible.
To get more space,you can remove top freezer drawer since it does not affect thermal and mechanical characteristics. A declared storage volume of frozen food storage compartment is calculated with these drawers removed.
In case the model has Cool Select Zone, do not insert a shelf to this rail, or the shelf can collide with beverage station cover and the beverage station cover can be broken.
CAUTION
14
DA99-02318A (HM10-EN)-0.2.indd 30 2010.7.6 11:48:16 AM
operating _31
02 OPERATING
Storing Food in the Freezer
ICECHUTE
Do not put your fingers, hands or any other objects in the ice chute or the ice maker bucket. This may result in personal injury or material damage.
SHELVES
Can be used to store all types of frozen food.
DOORBINS
Can be used for small packages of frozen food.
DRAWERS
Best used to store meats or dry foods. Stored food should be wrapped securely using foil or other suitable wrapping materials or containers.
Storing Food in the Fridge
SHELVES
WINESHELF(OPTIONAL)
MOVINGSHELF (OPTIONAL)
Z-SHELF(OPTIONAL)
EGGTRAY
Best place to keep eggs. Place the EGG TRAY on the shelf for easy
access.
COOLSELECTZONE DRAWER(OPTIONAL)
Helps to preserve the taste, and prolong the freshness of your food. Use it to store cheese, meat, poultry, fish or any other foods that are consumed on a regular basis.
FRUIT&VEGETABLE DRAWER
Used to preserve the freshness of your stored vegetables and fruits. It has been specifically designed to control the level of humidity within the drawer.
DAIRYBIN
Can be used to store smaller dairy items like butter or margarine, yogurt or cream-cheese bricks.
DOORBINS
Designed to handle large, bulky items such as gallons of milk or other large bottles and containers.
BEVERAGESTATION (OPTIONAL)
Bottles should be stored tightly together so that they do not tip and fall out when the refrigerator door is opened.
• If you plan to go away for a signicant time, empty the refrigerator and turn it off. Wipe the excess moisture from
the inside of the appliance and leave the doors open. This helps keep odor and mold from developing.
• If the refrigerator is not to be used for a long period of time, pull out the power plug.
- Deterioration in the insulation may cause fire.
Designed to move with foods easily. It can be used to store all types food and drinks need to move often.
Maximising and efficiently space usage. Enough to store not wine bottles but also 2 litter
carton of milk.
Helps wines maintain their taste by providing an optimized place for storing your wine bottles.
WARNING
WARNING
Designed to be crack-resistant. They can be used to store all types of food and drinks. Circular marks on the glass surface are a normal phenomenon and can usually be wiped clean with a damp cloth.
14
Can be used to store the frequently used items, such as canned beverages and snacks and allows access to these items without opening the refrigerator door.
1
2
3
4
5
6
7
8
9
10
11
12
13
DA99-02318A (HM10-EN)-0.2.indd 31 2010.7.6 11:48:21 AM
32_ operating
operating the SAMSUNG side-by-side refrigerator
USING THE COOLSELECT ZONE™ DRAWER (OPTIONAL)
Quick Cool
• You can use the Quick Cool feature
with the CoolSelect Zone
TM
.
• “Quick Cool” allows 1~3 canned
beverages to cool within 60 min.
• To cancel this function, press
the “Quick Cool” button again. CoolSelect Zone
TM
returns to the
previous temperature.
• When “Quick Cool” ends, it returns
to the “Cool” temperature setting.
Thaw
• Drips loss and quality deterioration
of meats reduces the freshness of foods.
After “Thaw” is selected, warm and cold air is alternately supplied into the CoolSelect ZoneTM Drawer.
• Depending on the weight of meat, thawing time can be selected for 4 hrs, 6 hrs, 10 hrs, and 12 hrs
sequentially.
• When “Thaw” ends, CoolSelect Zone
TM
display returns to “Zero Zone” condition.
• When “Thaw “ ends, there are no juice in the meats and they are half-freezed condition so it is easy
to cut them for cooking.
• To cancel this option, press any button except “Thaw”.
• The approximate thawing time of meat and sh are shown below. (Based on 1inch thickness)
THAW TIME 4hours 6hours 10hours 12hours
WEIGHT 363g (0.8Ib) 590g (1.3Ib) 771g (1.7Ib) 1000g (2.2Ib)
WARNING
With the “Thaw” option, food which is not needed to thaw in the CoolSelect ZoneTM Drawer should be removed.
Depending on the size and thickness of meat and fish, the thawing time may vary. The above weight represents the total weight of food in the CoolSelect Zone
TM
Drawer.
Ex) The total thawing time for 400g frozen beef and 600g frozen chicken will be 10 hours.
DA99-02318A (HM10-EN)-0.2.indd 32 2010.7.6 11:48:22 AM
operating _33
02 OPERATING
Zero Zone (0ºC)
• When “Zero Zone” is chosen, the temperature of the CoolSelect ZoneTM Drawer is kept at 0 ºC
regardless of the set refrigerator temperature.
• “Zero Zone” temperature helps keep meat or sh fresh longer.
Cool
• When “Cool” is chosen, the temperature will be the same as the set temperature of the refrigerator.
The digital panel shows the same temperature as that of the display panel.
• The CoolSelect Zone
TM
Drawer allows extra refrigerator space.
WARNING
For “Quick Cool” option, food stored in the CoolSelect ZoneTM Drawer should be removed.
Depending on the beverages, the cool-down time may vary.
DA99-02318A (HM10-EN)-0.2.indd 33 2010.7.6 11:48:22 AM
34_ operating
operating the SAMSUNG side-by-side refrigerator
REMOVING THE FREEZER ACCESSORIES
Cleaning and rearranging the interior of the freezer is simple.
1. Remove the Glass shelf by pulling the shelf out as far as it will go. Then, gently lift it up and remove it.
2. Remove the door bin by holding the door bin with both hands
and then gently lift it up.
3. Remove the Plastic drawer by pulling it out and slightly lifting
it up.
4. Remove the Icemaker bucket by lifting up and pulling it out.
5. Remove the front leg Cover by opening both the freezer and refrigerator doors, and removing
the three screws. Once the screws are free, detach the cover. To reattach the front leg cover, place it back in its original position and tighten the three screws.
Do not use excessive force when removing the cover. Otherwise, the cover may break and cause injury.
DA99-02318A (HM10-EN)-0.2.indd 34 2010.7.6 11:48:23 AM
operating _35
02 OPERATING
REMOVING THE FRIDGE ACCESSORIES
1. Remove the spill Proof Glass Shelf by pulling the shelf out as
far as it will go. Then, gently lift it up and gently remove it.
2. Remove the Vegetable & Fruit Drawer by pressing on the
indentations found on the inside left and right sides of the Veggie Box/Dry Box cover and remove by pulling forward.
Holding the drawer with one hand, lift it up a little bit while
pulling it forward and take it out of the refrigerator.
3. Remove the Gallon Door Bin by holding the bin with both
hands and gently lifting it up.
4. The Z Shelf is attached to the cabinet wall.
Remove the wine shelf by sliding it up and gently lifting the
shelf out of the tabs.
Ensure that the Z shelf is fitted as shown in the
diagram and not upside down.
Before removing any accessories, make sure that no food is in the way. When possible, remove the food altogether to reduce the risk of accidents.
To get the best energy efficiency of this product, please leave all selves, drawers and baskets on their original position like as illustration in page (30)
CAUTION
DA99-02318A (HM10-EN)-0.2.indd 35 2010.7.6 11:48:25 AM
36_ operating
WARNING
operating the SAMSUNG side-by-side refrigerator
CLEANING THE REFRIGERATOR
Caring for your Samsung Side-By-Side Refrigerator prolongs the life of your appliance and helps keep it odour and germ-free.
Cleaning the Interior
Clean the inside walls and accessories with a mild detergent and then wipe dry with a soft cloth. You can remove the drawers and shelves for a more thorough cleaning. Just make sure to dry them before putting them back into place.
Cleaning the Exterior
Wipe the digital panel and display panel with a clean, soft cloth. Spray water onto the cleaning cloth instead of spraying directly on the surface of the refrigerator. This helps ensure an even distribution of moisture to the surface. The doors, handles and cabinet surfaces should be cleaned with a mild detergent and then wiped dry with a soft cloth. To keep your appliance looking its best, the exterior should be polished once or twice a year.
Do not use Benzene, Thinner or Clorox™ for cleaning. They may damage the surface of the appliance and can create a risk of fire.
Cleaning the Soft touch type Home Bar
Use a damp cloth to clean the ice and water dispenser. Then wipe dry with a clean, soft cloth.
Use soft touch type Home Bar as follow
- In the case of opening the Home Bar, it will be opened automatically when you press the upper position of the
Home Bar until a click is heard.
- In the case of closing the Home Bar, press the upper position of the Home Bar until a click is heard.
Cleaning the Rubber door seals
If the rubber door seals are dirty the doors may not close properly, and the refrigerator will not operate efficiently. Keep the door seals free of grit or grime by cleaning the doors with a mild detergent and damp cloth. Wipe dry with a clean, soft cloth.
Do not spray the refrigerator with water while it is plugged in, as it may cause an electric shock. Do not clean the refrigerator with benzene, thinner or car detergent for risk of fire.
CAUTION
DA99-02318A (HM10-EN)-0.2.indd 36 2010.7.6 11:48:30 AM
operating _37
02 OPERATING
Cartridge
Cleaning the Deodouriser (Optional)
To clean the twin deodouriser, remove the cover with a flat blade screwdriver. Remove the deodouriser cartridge from the cover and soak it in clean, warm water for at least 4 hours. Then, allow the cartridge to dry completely before replacing it in the holder. This can take up to 8 hours in a well-ventilated area. For best results, repeat this process once or twice a year.
Cleaning behind the Refrigerator
To keep cords and exposed parts free of dust and dirt accumulation, vacuum behind the appliance once or twice a year.
Do not remove the back cover. There can be a risk of electric shock.
If the cartridge dries in a confined (or humid) area, there may be an odor to the cartridge. If this occurs, re-clean and allow to dry in a well-ventilated area.
WARNING
DA99-02318A (HM10-EN)-0.2.indd 37 2010.7.6 11:48:31 AM
38_ operating
CAUTION
operating the SAMSUNG side-by-side refrigerator
CHANGING THE INTERIOR LIGHTS
Pull the power plug out of the socket before changing the interior light of the refrigerator.
- Otherwise, there is a risk of electric shock. If you experience difficulty when changing the light, contact your service center.
Changing the LED Type Lighting
Do not disassemble or replace the LED type Lighting. To change the LED Type Lighting contact Samsung service center or your authorised Samsung dealer.
CHANGING THE WATER FILTER
To reduce risk of water damage to your property DO NOT use generic brands of water filers in your SAMSUNG Refrigerator. USE ONLY SAMSUNG BRAND WATER FILTERS. SAMSUNG will not be legally responsible for any damage, including, but not limited to property damage caused by water leakage from use of a generic water filter. SAMSUNG Refrigerators are designed to work ONLY WITH SAMSUNG Water Filter.
The “Filter Indicator” light lets you know when it is time to change your water filter cartridge. To give you some time to get a new filter, the light will come on up just before the capacity of the current filter runs out. Changing the filter on time provides you with the freshest, cleanest water from your fridge.
1. Remove the water filter from the box and put a month indicator sticker on the filter as shown.
2. Place a sticker on the filter that dates six months in the future. For example, if you are replacing the water filter in March, put the “SEP” (September) sticker on the filter to remind you to replace in September. Normally filter life is about every 6 months.
3. Next, remove the fixed cap by turning it counter clockwise.
4. Remove the new filter’s protective cap and remove the old filter.
5. Position and insert the new filter into the filter housing.
Slowly turn the water filter clockwise 90º to align with the indication mark on the cover, locking
the filter in position. Make sure that the indicator is lined up with the “lock” position. Do not over tighten.
1
2
3
4
5
Align the indication mark with lock position
Cover filter
Sticker
(month indicator)
WARNING
WARNING
DA99-02318A (HM10-EN)-0.2.indd 38 2010.7.6 11:48:36 AM
operating _39
02 OPERATING
6. Once you have completed this process, hold the Ice Type button for 3 seconds to reset the filter schedule.
7. Lastly, Dispense 1L of water through water dispenser and throw away. Make sure that water flows clearly again before drinking.
A newly installed water filter cartridge may cause water to briefly spurt from the water dispenser. This is due to air getting into the line. It should pose no problem to operation.
Ordering replacement filters
To order more water filter cartridges, contact your authorised Samsung dealer.
USING THE DOORS
The refrigerator doors are equipped with a door opening and closing feature that ensures that the doors close all the way and are securely sealed. After opening beyond a certain point, the door will “catch” and remain open. When the door is ajar ahead of the catch that allows it to stay open, it will close automatically.
DA99-02318A (HM10-EN)-0.2.indd 39 2010.7.6 11:48:36 AM
PROBLEM SOLUTION
The refrigerator does not work at all or it does not chill sufficiently.
• Check that the power plug is properly connected.
• Is the temperature control on the display panel set to the correct temperature? Try
setting it to a lower temperature.
• Is the refrigerator in direct sunlight or located too near a heat source?
• Is the back of the refrigerator too close to the wall and therefore keeping air from
circulating?
The food in the fridge is frozen.
• Is the temperature control on the display panel set to the correct temperature? Try
setting it to a warmer temperature.
• Is the temperature in the room very low?
• Did you store the food with a high water content in the coldest part of the fridge?
Try moving those items into the body of the fridge instead of keeping them in the CoolSelect Zone™ drawer.
You hear unusual noises or sounds.
• Check that the refrigerator is level and stable.
• Is the back of the refrigerator too close to the wall and therefore keeping air from
circulating?
• Was anything dropped behind or under the refrigerator?
• A “ticking” sound is heard from inside the refrigerator. This is normal and occurs
because various accessories are contracting or expanding in relation to the temperature of the refrigerator interior.
The front corners and sides of the appliance are hot and condensation is occurring.
• Some heat is normal as anti-condensators are installed in the front corners of the
refrigerator to prevent condensation.
• Is the refrigerator door ajar? Condensation can occur when you leave the door
open for a long time.
Ice is not dispensing.
• Did you wait for 12 hours after installation of the water supply line before making
ice?
• Is the water line connected and the shut-off valve open?
• Did you manually stop the ice making function? Make sure Ice Type is set to
Cubed or Crushed.
• Is there any ice blocked within the ice storage unit?
• Is the freezer tAemperature too warm? Try setting the freezer temperature lower.
You can hear water bubbling in the refrigerator.
• This is normal. The bubbling comes from the refrigerant coolant liquid circulating
through the refrigerator.
There is a bad smell in the refrigerator.
• Has a food item spoiled?
• Make sure that strong smelling food (for example, fish) is wrapped so that it is
airtight.
• Clean out your freezer periodically and throw away any spoiled or suspect food.
Frost forms on the walls of the freezer.
• Is the air vent blocked? Remove any obstructions so air can circulate freely.
• Allow sufficient space between the foods stored for efficient air circulation.
• Is the freezer door closed properly?
Water dispenser is not functioning.
• Is the water line connected and the shut-off valve open?
• Has the water supply line tubing been crushed or kinked?
Make sure the tubing is free and clear of any obstruction.
• Is the water tank frozen because the refrigerator temperature is too low?
Try selecting a warmer setting on the main display panel.
40_ troubleshooting
troubleshooting
DA99-02318A (HM10-EN)-0.2.indd 40 2010.7.6 11:48:37 AM
memo
DA99-02318A (HM10-EN)-0.2.indd 41 2010.7.6 11:48:37 AM
memo
DA99-02318A (HM10-EN)-0.2.indd 42 2010.7.6 11:48:37 AM
memo
DA99-02318A (HM10-EN)-0.2.indd 43 2010.7.6 11:48:37 AM
Code No. DA99-02318A REV(0.2)
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
COUNTRY CALL Website
AUSTRALIA
1300 362 603 www.samsung.com/au
COLOMBIA
01-8000112112 www.samsung.com.co
EIRE
0818 717 100 www.samsung.com/ie
HONG KONG
(852) 3698-4698 www.samsung.com/hk
INDIA
3030 8282, 1800 110011, 1-800-3000-8282,1800 266 8282
www.samsung.com/in
MALAYSIA
1800-88-9999 www.samsung.com/my
NEW ZEALAND
0800 SAMSUNG (726-7864) www.samsung.com/nz
PANAMA
800-7267 www.samsung.com/latin
PHILIPPINES
1800-10-SAMSUNG (726-7864) www.samsung.com/ph
SINGAPORE
1800-SAMSUNG (726-7864) www.samsung.com
SOUTH AFRICA
0860-SAMSUNG (726-7864 ) www.samsung.com
U.K
0845 SAMSUNG (7267864) www.samsung.com
VIETNAM
1 800 588 889 www.samsung.com
In an effort to promote recycling this user manual is printed on recycled paper.
AmbientRoomTemperatureLimits
This refrigerator is designed to operate in ambient temperatures specified by its temperature class marked on the rating plate.
Class Symbol Ambient Temperature range (°C)
Extended Temperate SN +10 to +32
Temperate N +16 to +32
Subtropical ST +16 to +38
Tropical T +16 to +43
Internal temperatures may be affected by such factors as the location of the refrigerator, ambient temperature and the frequency with which you open the door. Adjust the temperature as required to compensate for these factors.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate col­lection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
English
DA99-02318A (HM10-EN)-0.2.indd 44 2010.7.6 11:48:37 AM
Loading...