Samsung RS263TDRS User Manual

Refrigerator

RS263TD

user manual

imagine the possibilities

English

Free Standing Appliance

Thank you for purchasing this Samsung product. To receive more complete service,

please register your product at

www.samsung.com/register

features of your side-by-side refrigerator

KEY FEATURES OF YOUR NEW REFRIGERATOR

Your Samsung Refrigerator comes equipped with various innovative storage and energy-efficient features.

• Xtra Space

Vertical room next to the ice maker in the freezer provides space for pizza etc.

• Door Alarm

Beep sound reminds you the door is open.

• Vegetable Crisper

Optimized humidity control keeps vegetables & fruits fresh.

• Compact Ice Maker

• Water Filtration System

• Digital Display and Temperature Control

For easy future reference, write the model and serial number down. You will find your model number on the left bottom side of the refrigerator.

2_ features

Model #

Serial #

safety information

SAFETY INFORMATION

Before using your new Samsung Side-By-Side Refrigerator, please read this manual thoroughly to ensure that you know how to safely and efficiently operate the features and functions that your new appliance offers.

This appliance is not intended for use by people (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

- Failing to do so may result in electric shock, fire, an explosion, problems with the product, or injury.

Because the following Instructions cover various models, the characteristics of your refrigerator may differ slightly from the refrigerator described in this manual. If you have any questions contact us at

1-800-SAMSUNG or find help and information online at www.samsung.com.

Important safety symbols and precautions:

WARNING

CAUTION

These warning signs are here to prevent injury to you and others. Please follow them carefully. After reading this section, keep it in a safe place for future reference.

•R600a or R134a can be used as a refrigerant. Check the compressor label on the rear of the appliance and the rating label inside the fridge to see which refrigerant is used for the refrigerator.

Hazards or unsafe practices that may result in severe personal injury or death.

Hazards or unsafe practices that may result in minor personal injury or property

damage.

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow directions carefully.

Unplug the power plug from the wall socket.

Make sure the refrigerator is grounded to prevent electric shock.

Call the contact center for help.

Note.

safety information _3

safety information

SEVERE WARNING SIGNS FOR INSTALLATION

WARNING

• Do not install the refrigerator in a damp place or place where it may come in contact with water.

- Deteriorated insulation of electrical parts may cause an electric shock or fire.

• Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain drops).

• Do not place this refrigerator in direct sunlight or expose to the heat from stoves, room heaters or other appliance.

• Do not plug several appliances into the same multiple power board. The refrigerator should always be plugged into its own individual electrical board which has a voltage rating that matched the rating plate.

- This provides the best performance and also prevents overloading house wiring circuits,

which could cause a fire hazard from overheated wires.

• If the wall socket is loose, do not insert the power plug.

- There is a risk of electric shock or fire.

• Do not use a cord that shows cracks or abrasion damage along its length or at either end.

• Do not bend the power cord excessively or place heavy articles on it.

• Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

- Damage to the cord may cause short-circuit, fire and/or electric shock.

• Do not use aerosols near the refrigerator.

- Aerosols used near the refrigerator may cause an explosion or fire.

• The water supply to this refrigerator must only be installed/connected by a suitably qualified person and connect to a potable water supply only.

• In order to operate the ice maker properly, water pressure of 20~125 psi is required.

• This refrigerator must be properly installed and located in accordance with the manual before it is used.

• Connect the power plug in proper position with the cord hanging down.

- If you connect the power plug upside down, the wire can get cut off and cause a fire or

• When moving the refrigerator, be careful not to roll over or damage the power cord.

- This constitutes a fire hazard.

• Make sure that the power plug is not squashed or damaged by the back of the refrigerator.

• Keep the packing materials out of reach of children.

- There is a risk of death from suffocation if children put them on their head.

• The appliance must be positioned so that the plug is accessible after installation.

• You need to remove all the protective plastic film before you initially plug in to use the product.

• The Refrigerator must be safely grounded

- Always make sure that you have grounded the Refrigerator before attempting to investigate

4_ safety information

electric shock.

or repair any part of the appliance. Power leakages can cause severe electric shock.

• Never use gas pipes, telephone lines or other potential lightning attractors as an electrical ground.

- Improper use of the grounding plug can result in a risk of electric shock.

If it is necessary to use an extension cord, use only a 3-wire extension cord that has a

3-blade grounding plug and a 3-slot receptacle that will accept the plug on the appliance. The marked rating of the extension cord should be AC115-120V, 10A, or more. If a grounding adapter is used, make sure the receptacle box is fully grounded.

• If the power cord is damaged, have it replaced immediately by the manufacturer or its service agent.

CAUTION SIGNS FOR INSTALLATION

CAUTION

• Allow sufficient space to install the refrigerator on a flat surface.

- If your refrigerator is not level, the internal cooling system may not work correctly.

• Keep ventilation opening in the appliance enclosure or mounting structure clear of obstruction.

• Allow the appliance to stand for 2 hours after installation.

WARNING

SEVERE WARNING SIGNS FOR USING

• Do not insert the power plug with wet hands.

• Do not store articles on the top of the appliance.

- When you open or close the door, the articles may fall and cause personal injury and/or

material damage.

• Do not put a container filled with water on the refrigerator.

- If spilled, there is a risk of fire or electric shock.

• Children should be supervised to ensure that they do not play with the appliance.

• Do not let children hang on the door. A serious injury may occur.

• Do not let children enter inside of the refrigerator. There is a risk of children entrapment.

• Do not insert your hands into the bottom area under the appliance.

- Any sharp edges may cause personal injury.

• Do not let children step on drawer’s cover.

- The drawer may break and cause them to slip.

• Do not overfill the refrigerator with food.

- When you open the door, an item may fall out and cause personal injury or material

damage.

• Please observe maximum storage times and expiry dates of frozen goods.

• Do not touch the inside walls of the freezer or products stored in the freezer with wet hands.

- This may cause frostbite.

• Never put fingers or other objects into the water dispenser hole, ice chute and ice maker bucket.

- It may cause personal injury or material damage.

• Do not spray inflammable gas near the refrigerator.

- There is a risk of explosion or fire.

• Do not store volatile or flammable substances in the refrigerator.

- The storage of benzene, thinner, alcohol, ether, LP gas and other such products may cause

explosions.

safety information _5

safety information

WARNING

SEVERE WARNING SIGNS FOR USING(CONT’D)

• Do not store pharmaceuticals products, scientific materials or temperature sensitive products in the refrigerator.

- Products that require strict temperature controls must not be stored in the refrigerator.

• Do not place or use an electrical appliance inside the refrigerator, unless it is of a type recommended by the manufacturer.

• Do not use mechanical devices or any other means to accelerate the defrosting process, other than those recommended by the manufacturer.

• Do not damage the refrigerant circuit.

• Do not disassemble or repair the refrigerator by yourself.

- You run risk of causing a fire, malfunction and/or personal injury.

• Children should be supervised to ensure that they do not play with the appliance.

• Bottles should be stored tightly together so that they do not fall out.

• This product is intended only for the storage of food in a domestic environment.

• If a gas leak is detected, avoid any naked flames or potential sources of ignition and air the room in which the appliance is standing for several minutes.

• Use only the LED Lamps provided by manufacturer or service agents

• Pull the power plug out of the socket before changing the interior lamps of the refrigerator.

- Otherwise, there is a risk of electric shock.

• If there are burning smells or smoke, pull out power plug immediately and contact your Samsung Electronics service center.

• If you experience difficulty when changing the light, contact service agents.

• If the products equipped with LED Lamp, do not disassemble Lamp Cover and LED Lamp by yourself.

- Please contact your service agents.

• If any dust or water is in refrigerator, pull out power plug and contact your Samsung Electronics service center.

- Otherwise there is a risk of fire.

CAUTION SIGNS FOR USING

CAUTION

• Do not re-freeze frozen foods that have thawed completely.

Do not place carbonated or fizzy drinks in the freezer compartment. Do not put bottles or

glass containers in the freezer.

- When the contents freeze, the glass may break and cause personal injury.

• Service warranty and Modification.

- Any changes or modifications performed by a 3rd party on this finished appliance is not

covered under Samsung warranty service, nor can Samsung be responsible for safety issues that result from 3rd party modifications.

• Do not block air holes.

If the air holes are blocked, especially with a plastic bag, the refrigerator can be over cooled.

If this cooling period lasts too long, the water filter may break and cause water leakage.

6_ safety information

• If the refrigerator is disconnected from the power supply, you should wait for at least five minutes before plugging it back.

If you have a long vacation planned or the refrigerator is not to be used for a long period of

• time, you must empty the refrigerator and pull out the power plug and close the water valve.

- Deterioration in the insulation may cause fire.

- Otherwise, water leakage may occur.

• In the event of a power failure, call the local office of your Electricity Company and ask how long it is going to last.

Most power failures that are corrected in an hour or two will not affect your refrigerator

temperatures. However, you should minimize the number of door openings while the power is off.

- But should the power failure last more than 24hours, remove all frozen food.

• Unplug the power plug during a thunder/lightning storm.

• Wipe excess moisture from the inside and leave the doors open.

- Otherwise, odor and mold may develop.

• To get best performance of product,

- Do not place foods too closely in front of the vents at the rear of the appliance as it can

obstruct free air circulation in the refrigerator compartment.

- Wrap the food up properly or place it in airtight containers before putting it into the

refrigerator.

- Do not store food which goes bad easily at low temperature, such as bananas, melons.

- Use only the ice maker provided with the refrigerator.

- Your appliance is frost free, which means there is no need to manually defrost your

appliance, as this will be carried out automatically.

- Temperature of frozen food during defrosting can shorten its storage life.

- The appliance might not operate consistently (possibility of defrosting of contents or

temperature becoming too warm in the frozen food compartment) when sited for an extended period of time below the cold end of the range of temperature for which the refrigerating appliance is designed.

- The fuse on refrigerator must be changed by a qualified technician or service company.

Failing to do so may result in electric shock or personal injury.

- Do not place food inside the refrigerator in a haphazard way.

The food will not cool properly.

- Do not use a hair dryer to dry the inside of the refrigerator. Do not place a lighted candle in

the refrigerator for removing bad odors.

This may result in electric shock or fire.

• Fill water tank, ice tray, water cubes only with potable water.

• When the refrigerator gets wet by water, pull out the power plug and contact your Samsung Electronics service center.

safety information _7

safety information

CAUTION SIGNS FOR CLEANING

CAUTION

• Do not directly spray water inside or outside the refrigerator.

- There is a risk of fire or electric shock.

• Remove any foreign matter or dust from the power plug pins. Do not use a wet or damp cloth when cleaning the plug, remove any foreign material or dust from the power plug pins.

- Otherwise there is a risk of fire or electric shock.

• Unplug the refrigerator before cleaning and making repairs.

SEVERE WARNING SIGNS FOR DISPOSAL

WARNING

• Risk of child entrapment. Before you throw away your old refrigerator or freezer.

- Take off the doors.

- Leave the shelves in place so that children may not easily climb inside.

• Please dispose of the packaging material for this product in an environmentally friendly manner.

• Leave the shelves in place so that children may not easily climb inside. Ensure that none of the pipes on the back of the appliance are damaged prior to disposal.

• When disposing of this refrigerator, remove the door/door seals and door latch so that small children or animals cannot become trapped inside.

Children should be supervised to ensure that they do not play with the appliance.

• Cyclopentane is used as in the insulation. The gases in insulation material require a special disposal procedure. Please contact your local authorities in regard to the environmentally safe disposal of this product. Ensure that none of the pipes on the back of the refrigerator are damaged prior to disposal.

8_ safety information

contents

SETTING UP YOUR SIDE-BY-SIDE

REFRIGERATOR

OPERATING YOUR

SIDE-BY-SIDE REFRIGERATOR

CLEANING AND MAINTAINING YOUR

SIDE-BY-SIDE REFRIGERATOR

10 Getting ready to install the refrigerator 12 Setting up the refrigerator 17 Leveling the refrigerator 18 Making minor adjustment to the doors 19 Checking the water dispenser line 20 Installing the water dispenser line

22 Checking the control panel 23 Using the control panel 25 Using the ice and cold water dispenser 26 Storing food

28 Removing the freezer/fridge accessories 29 Cleaning the refrigerator 30 Changing the water filter

APPENDIX

WARRANTY

31 Troubleshooting

32 warranty

contents _9

setting up your side-by-side refrigerator

GETTING READY TO INSTALL THE REFRIGERATOR

Congratulations on the purchase of your Samsung Side-By-Side Refrigerator. We hope you will enjoy the many state-of-the-art features and efficiencies that this new appliance has to offer.

Selecting the best location for the refrigerator

• Select a location with easy access to the water supply.

• Select a location without direct exposure to sunlight.

• Select a location with level (or nearly level) flooring.

• Select a location with enough space for the refrigerator doors to open easily.

• Allow sufficient space to install the refrigerator on a flat surface.

- If your refrigerator is not level, the internal cooling system may not work correctly.

- Refer to drawing and dimensions below for overall space required for use.

at least 2” (50.8mm)at least 2” (50.8mm)

(1,013.5mm)

46 (1,169.5mm)

135 135

(1,103.5mm)

(1,295.5mm)

62 (1,577mm)

Do not install the refrigerator where the temperature can drop below 50°F (10°C).

When moving your refrigerator

To prevent floor damage, be sure the front leveling legs are in the up position (above the floor). Refer to ‘Leveling the refrigerator’ in the manual (page 17). To protect the finish of the flooring, place a protection sheet, such as packing carton under the refrigerator.

When installing, servicing or cleaning behind the

CAUTION

refrigerator, be sure to pull the unit straight out and push back in straight after finishing.

10_ setting up

First things first! Make sure that you can easily move your refrigerator to its final location by measuring doorways (both width and height), thresholds, ceilings, stairways, etc.

The following chart details the exact height and depth.

MODEL RS263TD

Dimensions [mm(inch)]

Width

Depth

Height

Only Cabinet

With Leg Front

Only Cabinet

With Door

With Handle

90˚ Open

135˚ Open

Only Cabinet

With Hinge

With Door

908 (35

915.5(36 1/20)

746.5 (29 13/32)

857.5 (33 3/4)

922.5 (36 11/32)

F 1,169.5 (46 1/16)/ R 1,295.5 (51)

F 1,013.5 (39 29/32)/ R 1,103.5 (43 15/32)

1,742.5 (68 5/8)

1,776 (69 15/16)

1,774 (69 17/20)

3/4)

• Allow clearance to the right, left, back and top when installing. This will help reduce power

consumption and keep your energy bills lower.

• Make sure you disconnect the water supply line BEFORE removing the freezer door.

To avoid damage, refer to ‘Separating the water suppiy line from the refrigerator’ in the manual(page 14).

01 SETTING UP

setting up _11

setting up your side-by-side refrigerator

SETTING UP THE REFRIGERATOR

Now that you have your new Refrigerator installed in place, you are ready to set up and enjoy the features and functions of the appliance. By completing the following steps, your Refrigerator should be fully operational. If not, first check the power supply and electricity source or try the troubleshooting section at the back of this user’s guide. If you have any further questions, contact your Samsung Electronics service center.

1. Place the Refrigerator in an appropriate location with reasonable clearance between the wall and the Refrigerator. Refer to installation instructions in this manual.

2. Once the Refrigerator is plugged in, make sure the interior light comes on when you open the doors.

3. Set the Temperature control [Refer to ‘Freezer/Fridge(Temperature adjustment)’, page 23] to the coldest temperature and wait for an hour. The Freezer will get slightly chilled and the motor will run smoothly.

4. After powering the Refrigerator, it will take a few hours to reach the appropriate temperature. You can store food and drinks in the Refrigerator after the temperature is sufficiently cool.

5. Assemble the water line to the refrigerator and verify that the couplers are correctly assembled without water leakage. (Refer to ‘Installing the water dispenser line, page 20)

Check the accessory list below.

Hex wrench Compression fitting Compression nut

Installing the handles

1. Take the handles out from the right side door.

The handles are included in the package.

Clip fitting lock(red)

2. Check if the word “UP” on the rear of the handle is facing right side up.

12_ setting up

3. Match the upper and lower handle locking tabs on the doors to the handles.

4. Fix the handles to the doors by sliding it down firmly until you hear a click sound.

01 SETTING UP

5. Check the installation of the handles by pulling on them. If the handles have been inserted

correctly, they should not move. Ensure the 2 handles are horizontally aligned.

If the handles are not aligned, repeat step 2 and 3. To align the doors, refer to ‘Leveling the refrigerator’ in the manual(page 17).

setting up _13

setting up your side-by-side refrigerator

SETTING UP THE REFRIGERATOR(CONT’D)

If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors.

Tools you will need

Philips Screwdriver Flat-blade Screwdriver 10mm Socket Wrench

Removing the Front Leg Cover

First, open both the freezer and refrigerator doors, and then take off the front leg cover by turning the three screws counter-clockwise.

FRONT LEG COVER

SCREW

Separating the water supply line from the refrigerator

1. Remove the water tube by pressing the coupler 2 and pulling the water tube 1 away.

Do not cut the water line. Gently separate it from the coupler.

Reattaching the water supply line

1. While pressing the front face of coupler

, insert the water line 1 in the coupler. Carefully place front cover and push to snap it into position.

Line

Coupler Coupler

1 2

Line

2. Insert 1 clip in plastic bac and check that it

14_ setting up

Clip A (1/4”)

holds the line firmly

Coupler

The water line must be fully inserted to the marked line to prevent water leakage from the dispenser.

Removing the freezer door

A few things to mention first.

• Make sure that you lift the door straight up so the hinges are not bent or broken.

• Be careful not to pinch the water tubing and wire harness on the door.

• Place doors on a protected surface to prevent scratching or damage.

1. With the Freezer door closed, remove the upper hinge cover

disconnect the wires

2. Remove hinge bolts

and take off the upper hinge to ensure that it does not fall on you.

with a 10mm Socket Wrench and a ground screw 4 counter-clockwise,

in the direction of the arrow. Be careful when removing the door

using a screwdriver, and then

01 SETTING UP

3. Open the Freezer door before lifting it up. Remove the door from the lower hinge

lifting the door

4. Remove the lower hinge

from the lower hinge bracket 9 by lifting the lower hinge in the

direction of the arrow.

Make sure to put the water line through the lower hinge before assembling it.

CAUTION

Reattaching the freezer doors

by carefully

To reattach the freezer doors, replace parts in reverse order.

CAUTION

setting up _15

setting up your side-by-side refrigerator

SETTING UP THE REFRIGERATOR(CONT’D)

Removing the fridge door

1. With the door closed, remove the upper hinge cover 1 using a screwdriver.

2. Remove hinge bolts

and take off the upper hinge to ensure that it does not fall on you.

with a 10mm Socket Wrench and ground screw 3 counter-clockwise,

in the direction of the arrow. Be careful when removing the door

Do not remove the sensor assembled in the right upper hinge cover.

CAUTION

3. Remove the door from the lower hinge 6 by lifting the door 7 .

4. Remove the lower hinge

Reattaching the fridge door

CAUTION

16_ setting up

from the lower hinge bracket 9 by lifting the lower hinge in the

direction of the arrow.

To reattach the fridge doors, replace parts in reverse order.

LEVELING THE REFRIGERATOR

Now that the doors are back on the refrigerator, you want to make sure the refrigerator is level so that you can make final adjustments. If the refrigerator is not level, it will not be possible to get the doors perfectly even.

The front of the refrigerator is also adjustable.

Before leveling the refrigerator, remove the front leg cover

Open both the freezer and fridge doors, and then take off the front leg cover by turning the three screws counter-clockwise.

01 SETTING UP

When the Freezer part is lower than the Fridge part.

Insert a flat-blade screwdriver into a slot on the Freezer Leg, then turn it clockwise.

When the Fridge part is lower than the Freezer part.

Insert a flat-blade screwdriver into a slot on the Fridge Leg, then turn it clockwise.

Screw Driver

Freezer Leg

Refer to the next section for the best way to make very minor adjustments to the doors.

Fridge Leg

Screw Driver

setting up _17

setting up your side-by-side refrigerator

MAKING MINOR ADJUSTMENTS TO THE DOORS

Remember, a level refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on levelling the refrigerator.

When the door of the freezer is higher than the fridge

Adjustment part

Open the doors and adjust them, one at a time, as follows:

1. Unscrew the nut

from the lower hinge until it reaches the upper end of the bolt 2.

Wrench

Bolt

Nut

When you release the nut

bolt

in a counter-clockwise direction. You should then be able to unscrew the nut

with your fingers.

, make sure that you use the hex wrench provided 3 to loosen the

2. Adjust the height difference between the doors by turning the bolt

clockwise

When you turn clockwise

3. After adjusting the doors, turn the nut

then tighten the bolt again with the wrench

, the door will move up.

clockwise until it reaches the lower end of the bolt,

to fix the nut in place 1.

clockwise or counter

Wrench

Bolt

Wrench

Bolt

Nut

18_ setting up

If you do not secure the nut firmly, the bolt may release.

CHECKING THE WATER DISPENSER LINE

A water dispenser is one of the helpful features on your new Samsung Refrigerator. To help promote better health, the Samsung water filter removes unwanted particles from your water. However, it does not sterilize or

destroy microorganisms. You may need to purchase a water purifying system to do that.

In order for the ice maker to operate properly, a water pressure of 20~125 psi (pound per square inch) is required. Under normal conditions, a 170 cc (5.75 oz.) paper cup can be filled in 10 seconds.

If the Refrigerator is installed in an area with low water pressure (below 20psi), you can install a booster pump to compensate for the low pressure.

After installing the water dispenser line, make sure the water storage tank inside the Refrigerator is properly filled. To do this, press the water dispenser lever until the water runs from the water outlet.

Water line installation kits are available at extra cost from your dealer. We recommend using a water supply kit that contains copper tubing.

Connecting to the water supply line

1. First, shut off the main water supply line.

2. Locate the nearest cold, drinking water line.

3. After complete the water supply installation (Water Line & Filter), turn your main water supply back on and flush 3 gallons(Flush approximately 6 minutes) into a bucket to clear and prime the water filter.

Cold water line

Pipe clamp

Water line installation kit

01 SETTING UP

Shut off valve

setting up _19

setting up your side-by-side refrigerator

INSTALLING THE WATER DISPENSER LINE

Connecting the water line to the Refrigerator.

There are several items that you need to purchase to complete this connection. You may find these items sold as a kit at your local hardware store.

• 1/4” compression nut • plastic tubing

• copper tubing • ferrule

Refrigerator

Plastic tubing

(Supplied)

Ferrule

(Not supplied)

Copper tubing or Plastic tubing

(Not supplied) (Not supplied)

Compression nut (1/4”) (Supplied)

Compression fitting (Supplied)

Bulb

Compression nut (1/4”) (Not supplied)

Household water line

1. Slip the compression nut

2. Tighten the compression nut

- If you are using copper tubing, slip the compression nut

through the supplied plastic tubing .

onto the 1/4” compression fitting.

(not included) and ferrule (not included)

on copper tubing (not included) as shown.

- If you are using plastic tubing

, insert the molded end(Bulb) of the plastic tubing into the

compression fitting.

Do not use without the molded end(Bulb) of the plastic tubing

CAUTION

Tighten the compression nut onto the compression fitting. Do not over-tighten the compression nut .

4. Turn water on and check for any leakage.

When using power cord

To prevent power cord damage, after product installation, arrange the remaining power cord to the unit cover and fix.

20_ setting up

Only connect the water line to a drinkable water source. If you have to repair or disassemble the water line, cut off 1/4” of the plastic tubing to make sure you get a snug, leak-free connection.

Non operation During operation

Removing residual matter inside the water supply line after installing filter

1. Turn ON the main water supply.

2. Press the Water button and push the dispenser pad.

Refer to ‘Checking the control panel’ in the manual (page 22)

Ice

3. Flush 3 gallons of water through the filter befor use.

(Flush approximately 6 minutes.) This will clean the water supply system and remove air from the lines.

4. Additional flushing may be required in some households.

5. Open the refrigerator door and make sure there are no water leaks coming

from the water filter.

A newly installed water filter cartridge may cause water to briefly spurt from the water dispenser. This is due to air getting into the line. It should pose no problem to operation.

LOCK

Check the amount of water supplied to the ice tray

1. Lift up and pull out the Ice maker bucket in the freezer.

Water

01 SETTING UP

2. When you press the Test button for 3 seconds,

the ice cube container is filled with water from the water supply tap. Put a bowl before you press the test button and check to make sure the amount of water is correct (see the illustration). If the water level is too low, the ice cubes will be small. This is not a problem with the ice maker but of the water pressure in the pipe.

3. In case ice does not come out, pull out the ice bucket and

press test button located on the bottom of ice maker.

setting up _21

+ 47 hidden pages