Samsung RFG298AA, RFG298AAPN User Manual
quick start guide
Product features
RFG298AA
Surround Multi Flow
A center-positioned fan and
ducts with multiple flow
effluences provide uniform
cooling for each shelf and fresh
food compartment corners.
Electronic control from
outside of Pantry Cover
The Cool Select Pantry is a full
width drawer with an adjustable
temperature control to help keep
food fresh longer.
16” Pizza Corner
Can be used to store a 16” pizza
in the Tilting pocket.
Ice and Water Dispenser
The ice and water dispenser
provides ice and cold water at
any time.
Twin Cooling System
The refrigerator and the freezer
have two evaporators. Given this
independent system, the freezer
and the refrigerator are cooled
individually and more efficiently.
Food odor from the refrigerator
does not affect food in the
freezer due to separate air flow
circulation.
Secure Auto Close Door
System
• Secure Auto Close Door System
• Cool tight doors
• Energy saving
• Prevents condensation on fridge
doors
Easy Handle System
• Ez-open Freezer Door
• Ergonomic Door Design
Auto Pull Out and Super
Extended Drawer
The upper drawer in the freezer
comes out automatically when
you open the freezer door and
can be pulled out all the way to
the Tilting Pocket.
The Installation Space
Selecting the best location for the Refrigerator
• A
Location with easy access to the water supply.
• A
Location without direct exposure to sunlight.
• A
Location with level (or nearly level) flooring.
• A
Location with enough space for the Refrigerator doors to open easily.
•
Allow sufficient space for air circulation of the internal cooling system.
If the Refrigerator does not have enough space, the internal cooling system may not work properly.
First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways
(both width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of Samsung French Door Refrigerator.
• Allow clearance to the right, left, back and top when installing. This
will help reduce power consumption and keep your energy bills lower.
• Do not install the Refrigerator where the temperature will go below
50ºF (10ºC).
• Do not locate the refrigerator where it may become wet.
FLOORING
For proper installation, this refrigerator must be placed on a level
surface of hard material that is the same height as the rest of the
flooring. This surface should be strong enough to support a fully
loaded refrigerator, or approximately 660lbs(299kg). Protect the finish
of the flooring. Cut a large section of the cardboard carton and place
under the refrigerator where you are working. When moving, be sure
to pull the unit straight out and push back in straight.
CAUTION
Model
Depth
“A”
Width
“B”
Height
“C”
Overall
Height “D”
Depth
“E”
RFG298AA
33”
(83.8cm)
35-3/4”
(90.8cm)
68-3/5”
(174.4cm)
69-3/4”
(177.1cm)
35-5/8”
(90.5cm)
B
A
C
E
D
B
A
C
E
D
3 inches
3/4
2 inches
2 inches
Operating your French Door Refrigerator
USING THE CONTROL PANEL
1
2
3
4
5
6
87
Press the Energy Saver button for better energy efficiency. If water drops appear on the doors, turn the
Energy Saver function off.
(
1
) Energy Saver
(
2
) Freezer/hold
3 sec for
Power Freezer
Press the Freezer / hold 3 sec for Power Freezer button to set the Freezer to your desired
temperature.
You can set the temperature between -8°F and 8°F. Press and hold the Freezer/hold 3 sec for Power
freezer button for 3 seconds to speed up the time needed to freeze products in the Freezer. It can be
helpful if you need to quickly freeze easily spoiled items or if the temperature in the Freezer has warmed
dramatically (For example, if the door was left open).
Press the Alarm / hold 3 sec for Power Freezer button to turn off the door open alarm.
(At first, alarm mode is On ) After removing the old water filter and installing a new one, reset the indicator
by pressing and holding this button for 3 seconds. (The indicator is lit at first and will light again in about 6
months to let you know it is time to change your water filter.)
(
3
) Alarm / hold 3 sec
for Filter Reset
Press the Lighting button to turn on the Dispenser LED lamp.
(
4
) Lighting
Press the Fridge / hold 3 sec for Power Cool button to set the fridge to your desired temperature.
You can set the temperature between 34°F and 46°F.
Press and hold the Fridge / hold 3 sec for Power Cool button for 3 seconds to speed up the time
needed to cool products in the Refrigerator. It can be helpful if you need to quickly cool easily spoiled
items or if the temperature in the fridge has warmed dramatically (For example, if the door was left open).
(
5
) Fridge / hold
3 sec for Power
Cool
Press the Ice OFF / hold 3 sec for Child Lock button to turn the fridge or freezer ice making function
off. If you press and hold this button for 3 seconds, the display and dispenser will be locked.
(
6
) Ice off / Hold 3
sec for Child Lock
Press the Ice Type button to select your desired ice type. Cubed and crushed ice modes will be
alternatively changed whenever you press the button. This mode can not be used with the Water mode
simultaneously.
(
7
) Ice Type
Press the Water button to dispense water. This mode can not be used with the Ice Type mode
simultaneously. Water mode will be off if you press the Ice Type button.
(
8
) Water
Some functions are activated after a few-second delay when the buttons are pressed, while others operate
immediately. This is normal operation.
Loading...