Samsung RFG293HAWP/XAA-00, RFG293HARS/XAA-03, RFG293HARS/XAA-02, RFG293HARS/XAA-01, RFG293HARS/XAA-00 Owner’s Manual

...

the possibilities

Thank you for purchasing this Samsung product. To receive more complete service or accessory parts,

please register your product at or contact

www. samsu ng. com/reg ister

1-800-SAMSUNG (726-7864)

KEY FEATURES OF YOUR NEW REFRIGERATOR

Your Samsung French Door Refrigerator comes equipped with various innovative storage and energy-

efficient features.

Twin Cooling System

The fridge and freezer have separate evaporators. Due to this independent cooling system, the fridge and freezer cool more efficiently. Additionally, this separate air flow system prevents food odor

in one compartment from seeping into the other compartment.

Cool Select PantryPLUS

The Cool Select pantry PLUsis a full-width drawer with adjustable temperature control.

Bigger & Wider Space

The wide shelf area and pantry provide enough space for larger items like a pizza box, etc. The wide freezer drawer also provides enough space for 2-3 turkeys.

Secure Auto Close

The Secure Auto Close feature automatically closes a door that is slightly open.

Compact Ice Maker

The ice maker can dispense cubed ice.

Digital Display and Temperature Control

Slim Water Filtration System

A slim water filter is placed between the crispers so you can change the filter conveniently without

removing items from refrigerator.

Door Alarm

A helpful beeper alerts you if a door is ajar.

Tilting Pocket

The Tilting pocket can be used to store up to a 16" pizza.

Auto Pull Out Drawer

The upper drawer in the freezer comes out automatically as you open the freezer door.

Super Extended Drawer

A large slide-out drawer for easy freezer organization.

EZ-Open Handle System

Lets you open the freezer door with less effort.

Energy Star

This Energy star labeled product may save you money on your energy costs.

2 Fea u es

For easy future reference, write the model and serial number down. You will find your model number and

serial number on the left side of the refrigerator.

Model #

Serial #

SAFETY INFORMATION

Before using your new Samsung French Door Refrigerator, please read this manual thoroughly to ensure that you know how to operate the features and functions that your new appliance offers safely and efficiently.

This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or those who lack experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

Because the following instructions cover various models, the characteristics of your refrigerator may differ slightly from the refrigerator described in this manual. If you have any question, contact us at 1-800-SAMSUNG

or find help and information online at www.samsung.com.

Important

WARNING

/5,

CAUTION

These warning signs are here to prevent injury to you and others.

Please follow them carefully.

After reading this section, keep it in a safe place for future reference.

safety symbols and precautions:

Hazards or unsafe practices that may result in severe personal injury or death.

Hazards or unsafe practices that may result in minor personal injury or property damage.

Do NOT attempt. Do NOT disassemble. Do NOT touch. Follow directions carefully. Unplug the power plug from the wall socket.

Make sure the refrigerator is grounded to prevent electric shock. Call the contact center for help.

Note.

w .,.oSEVEREWARNING SIGNS FOR INSTALLATION

Do not install the refrigerator in a damp place or place where it may come in contact with

water.

- Deteriorated insulation of electrical parts may cause an electric shock or fire. Do not place this refrigerator in direct sunlight or expose to the heat from stoves, room heaters

or other appliance. Do not plug several appliances into the same multiple power strip. The refrigerator should

always be plugged into its own individual electrical outlet which has a voltage rating that

matches the voltage listed on the refrigerator's rating plate.

- This provides the best performance and also prevents overloading house wiring circuits, which could cause a fire hazard from overheated wires.

Safety I-ffomqaton 3

If the wall socket is loose, do not insert the power plug.

- There is a risk of electric shock of fire.

,, Do not use a cord that shows cracks or abrasion damage along its length or at either end. ,, Do not bend the power cord excessively or place heavy articles on it.

,, Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull

straight out from the outlet.

- Damage to the cord may cause a short-circuit, fire and/or electric shock.

,, Do not use aerosols near the refrigerator.

- Aerosols used near the refrigerator may cause an explosion or fire.

This refrigerator must be properly installed and located in accordance with the manual before

it is used. Connect the power plug in proper position with the cord hanging down.

- if you connect the power plug upside down, the wire can get cut off and cause a fire or electric shock.

When moving the refrigerator, be careful not to roll over or damage the power cord.

- This constitutes a fire hazard.

,, Make sure that the power plug is not squashed or damaged by the back of the refrigerator. ,, Keep the packing materials out of reach of children.

- There is a risk of death from suffocation if a child puts the packing materials on his or her head.

,, The appliance must be positioned so that the plug is accessible after installation. ,, You need to remove all the protective plastic film before you initially plug the product in.

,, he refrigerator must be safely grounded

- Always make sure that you have grounded the refrigerator before attempting to investigate or

repair any part of the appliance. Power leakages can cause severe electric shock.

Never use gas pipes, telephone lines or other potential lightning attractors as an electrical ground.

- improper use of the grounding plug can result in a risk of electric shock.

if it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-blade

grounding plug and a 3-slot receptacle that will accept the plug on the appliance. The marked

rating of the extension cord should be AC115-120 V, 10 A, or more. if a grounding adapter is used, make sure the receptacle box is fully grounded.

,, If the power cord is damaged, have it replaced immediately by the manufacturer or its service agent.

CAUTION SIGNS FOR INSTALLATION

,, llow sufficient space to install the refrigerator on a flat surface.

- If your refrigerator is not level, the internal cooling system may not work correctly.

,, Keep the ventilation in the appliance enclosure or mounting structure clear of obstruction. ,, Allow the appliance to stand for 2 hours after installation.

..Z ..oSEVEREWARNING SIGNS FOR USING

Do not insert the power plug with wet hands.

o o

Do not store articles on the top of the appliance.

- When you open or close the door, the articles may fall and cause personal injury and/or material

damage.

Do not put a container filled with water on the refrigerator.

- If spilled, there is a risk of fire or electric shock.

Children should be supervised to ensure that they do not play with the appliance.

Do not let children hang on the door. A serious injury may occur.

Do not let children enter inside of the refrigerator. There is a risk of children entrapment.

4 Safety Iqformaton

SEVERE WARNING SIGNS FOR USING

Do not insert your hands into the bottom area under the appliance.

- Any sharp edges may cause personal injury. Do not let children step on a drawer's cover.

- The drawer may break and cause them to slip.

,, Do not overfill the refrigerator with food.

- When you open the door, an item may fall out and cause personal injury or material damage.

,, Do not touch the inside walls of the freezer or products stored in the freezer with wet hands.

- This may cause frostbite.

,, Never put fingers or other objects into the water dispenser hole, ice chute, or ice maker bucket.

- It may cause personal injury or material damage.

,, Do not spray flammable gas near the refrigerator.

- There is a risk of explosion or fire.

,, Do not store volatile or flammable substances in the refrigerator.

- The storage of benzene, thinner, alcohol, ether, LP gas and other such products may cause explosions.

,, Do not store pharmaceuticals products, scientific materials, or temperature sensitive products

in the refrigerator.

- Products that require strict temperature controls must not be stored in the refrigerator.

,, Do not place or use an electrical appliance inside the refrigerator, unless it is of a type

recommended by the manufacturer.

,, Do not use mechanical devices or any other means to accelerate the defrosting process, other

than those recommended by the manufacturer.

,, Do not damage the refrigerant circuit.

,, o not disassemble or repair the refrigerator by yourself.

- You run risk of causing a fire, malfunction and/or personal injury.

- When the interior or exterior LED lamp has gone out, please contact your service agents.

,, Children should be supervised to ensure that they do not play with the appliance. ,, Bottles should be stored tightly together so that they do not fall out.

,, This product is intended only for the storage of food in a domestic environment. ,, If a gas leak is detected, avoid any naked flames or potential sources of ignition and air the

room in which the appliance is standing for several minutes.

,, Use only the LED Lamps provided by manufacturer or service agents ,, If there are burning smells or smoke, pull out power plug immediately and contact your

Samsung Electronics service center.

,, If you experience difficulty when changing the light, contact a service agent.

- If the product is equipped with LED Lamps, do not disassemble the Lamp Cover and LED Lamp by yourself.

- Please contact your service agents.

,, If any dust or water is in refrigerator, pull out the power plug and contact your Samsung

Electronics service center.

- Otherwise there is a risk of fire

/K CAUTION SIGNS FOR USING

CAUTION

* Do not re-freeze frozen foods that have thawed completely.

Do not place carbonated or fizzy drinks in the freezer compartment. Do not put bottles or glass containers in the freezer.

- When the contents freeze, the glass may break and cause personal injury. Service warranty and Modification.

- Any changes or modifications pedormed by a 3rd party on this finished appliance are not covered under Samsung warranty service, nor can Samsung be responsible for safety issues that result from 3rd party modifications.

Safety Iffomr_a on 5

oDonot blockairholes.

- Iftheairholesareblocked,especiallywitha plasticbag,therefrigeratorcanbeovercooled.If thiscoolingperiodlaststoolong,thewaterfiltermaybreakandcausewaterleakage.

,,Iftherefrigeratorisdisconnectedfromthepowersupply,youshouldwaitforat leastfive

minutesbeforepluggingit back.

,,Ifyouhavea longvacationplannedortherefrigeratorisnotto be usedforalongperiodof

time,youmustemptytherefrigeratorandpulloutthepowerplug.

- Lettingtherefrigeratorrunfora longtimewithoutusingitcancausetheinsulationto deriorate andmaycauseafire.

- Wipeexcessmoisturefromtheinsideandleavethedoorsopen.

- Otherwise,odorandmoldmaydevelop.

,,Togetthebestperformancefromtheproduct:

- Donotplacefoodstoo closetotheventsattherearoftheapplianceasit canobstructfreeair circulationintherefrigeratorcompartment.

- Wrapfoodupproperlyorplaceit inairtightcontainersbeforeputtingitintothe refrigerator.

Fillthewatertank,icetray,andwatercubesonlywith potablewater.

If the product is flooded, make sure to contact your nearest service center.

- There is a risk of electric shock or fire.

CAUTION SIGNS FOR CLEANING

CAUTION

,, Do not directly spray water on the inside or outside the refrigerator.

- There is a risk of fire or electric shock.

,, Remove any foreign matter or dust from the power plug pins. Do not use a wet or damp cloth

when cleaning the plug.

- Otherwise, there is a risk of fire or electric shock.

,, Unplug the refrigerator before cleaning or making repairs.

WARNING

State of California Proposition 65 Warnings:

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to

publish a list of substances known to the State of California to cause cancer, birth defects, or other reproductive harm, and requires businesses to warn of potential exposure to such substances.

This product contains a chemical known to the State of California to cause cancer, birth defects, or

other reproductive harm. This appliance can cause low-level exposure to some of the substances listed, including benzene, formaldehyde, and carbon monoxide.

.. ., GSEVEREWARNING SIGNS FOR DISPOSAL

,, Risk of child entrapment. Before you throw away your old refrigerator or freezer :

- Take off the doors.

- Leave the shelves in place so that children can not easily climb inside.

,, Please dispose of the packaging material from this product in an environmentally friendly manner. ,, Leave the shelves in place so that children can not easily climb inside. Ensure that none of the

pipes on the back of the appliance are damaged prior to disposal.

,, When disposing of this refrigerator, remove the door/door seals and door latch so that small

children or animals cannot become trapped inside.

Children should be supervised to ensure that they do not play with the appliance.

,, Cyclopentane is used as in the insulation. The gases in the insulation material require a special disposal

procedure. Please contact your local authorities in regard to the environmentally safe disposal of this

product. Ensure that non e of the pipes on the back of the refrigerator are damaged prior to disposal.

6 Safety Informa on

Cont nt

SETTING UP YOUR

FRENCH DOOR REFRIGERATOR

OPERATING YOUR

FRENCH DOOR REFRIGERATOR

08 Getting ready to install the refrigerator 09 Accessories and required tools 09 Removing the refrigerator doors

11 Disassemble the freezer drawer 12 Reattaching the refrigerator doors

14 Assemble the freezer drawer 15 Adjusting the level

16 Making minor adjustments between doors 17 Adjusting the freezer drawer level 18 Installing a water line kit 19 Connecting the water supply line to the

refrigerator

20 Completing the set up

21 Using the control panel & display 26 Parts and features

27 Storing food in the fridge 27 Storing food in the freezer drawer

28 Using the Cool Select Pantry PLUS

29 Removing the refrigerator accessories 30 Using the doors 30 Using the tilting pocket 31 Removing the freezer accessories 32 Food storage tips 34 Cleaning the refrigerator

TROUBLESHOOTING

WARRANTY

35 Troubleshooting

GETTING READY TO INSTALL THE REFRIGERATOR

Congratulations on your purchase of the Samsung French Door Refrigerator.

We hope you enjoy the state-of-art features and efficiencies that this new appliance offers.

Selecting the best location for the refrigerator , A location with easy access to the water supply. , A location without direct exposure to sunlight.

, A location with a leveled floor. , A location with enough space for the refrigerator doors to

open easily.

, Allow sufficient space to the right, left, back and top for air circulation.

If the Refrigerator does not have enough space, the internal cooling

system may not work properly.

, Please ensure that appliance can be moved freely in the event of

maintenance & service.

If your refrigerator has an ice maker, allow extra space at the back for the water line connections.

When you install the refrigerator next to a fixed wall, you need a minimum clearance is 3 3A" (95mm) between the

refrigerator and wall to allow the door to swing open. First thing! Make sure that you can easily move your refrigerator to its final location by measuring doorways

(both width and height), thresholds, ceilings, stairways, etc.

The following chart details the exact height and depth of this Samsung

French Door Refrigerator.

i 2

Model Depth Width Height Overall Depth

"A.... B.... C" Height "D.... E"

RF-2--HA ,_,_/8 ,Jo _8 oo /2 o_ _8 ,Jo y8

{._ HU

'-'" 1/ " "" 6/, " "" 1/ " ""_ 6/, " "" 5/, "

(842 mm) (908 mm) (1740 mm) (1774 mm) (904 mm)

_ • Allow clearance to the right, left, back and top when installing. _ This will help reduce power consumption and keep your energy bills

Do not install the refrigerator where the temperature will go below 50°F (10°C). Do not locate the refrigerator where it may become wet.

When moving your refrigerator

CAUTION

To prevent floor damage, be sure the front adjusting

legs are in the up position (above the floor). Refer to "Adjusting the level" in the manual

(on page15).

Flat-blade screw dnver(-) Control Lever

FLOORING For proper installation, this refrigerator must be placed on a leveled

surface of hard material that is the same height as the rest of the

flooring. This surface should be strong enough to support a fully

loaded refrigerator, or approximately 3281bs (150kg). To protect the

finish of the flooring, cut a large section of the cardboard carton and

place it under the refrigerator where you are working. When moving a refrigerator, you need to pull and push it straight forwards or back. Do not wiggle it from side to side.

lower.

8 Settiqg Up

ACCESSORIES AND REQUIRED TOOLS

Make sure the following accessories are included with your refigerator:

Hex wrench Fastener

Required Tools (Not provided)

You need the following tools to complete the installation of your refirgerator:

Philips screwdriver(+) Flat-blade screwdriver(-) Socket wrench (10mm) Pliers Allen wrench(3/16")

(Smm)

REMOVING THE REFRIGERATOR DOORS

Some installations require door removal to transport the refrigerator to its final location. Do not remove the door/drawer if you don't need to. If you do not need to remove the refrigerator doors, go to adjusting the level. If you need to remove the doors, continue below. Before removing the door/drawer make

sure you read following items: A Disconnect power to the refrigerator before removing the door or drawer.

WARNING

Disassemble the refrigerator doors

....... removing the doors.

Disassemble the refrigerator doors

Be careful not to drop, damage or scratch the door/drawer while removing them. Be careful not to get injured while removing the door/drawer.

Reattach the door/drawer properly to avoid:

- Moisture from air leakage.

- Uneven door alignment.

- Wasting energy due to improper door seal.

Z_ Be careful not to drop and scratch the doors while

1. With the door opened, remove the cap top table (l_) with a flat-blade screwdriver(-), and close the door. Remove

the 3 screws holding down the top table (_) and turn it over with several wires connected.

Sett]g Up 9

2. Disconnect two connectors (1_) at each side of the top cap, the one connector (_) on right side door and the other

connector (_}) on left side door. Remove the tube (_) with pressing the dark gray

color part (1_}) of the water line coupler.

Z_ If a red clip is on the coupler, it must

....... be removed before removing the tube.

Remove the 3 hex head bolts (_) attached to the upper left and right door hinges with a socket wrench (10mm).

Remove the ground screw (_) attached to the upper left and right door hinges with a philips screwdriver (+).

Remove the upper left and right door hinges ([_}).

Socket wrench

4. Lift the door straight up to remove.

Remove the screw (1_) attached to the lower left and right door hinges with a philips screwdriver (+).

Remove the 2 hex head bolts (_) attached to the lower left

and right door hinges with an allen wrench (3/16").

Remove the lower left and right door hinges (_}).

10 Sett _g Up

DISASSEMBLE THE FREEZER DRAWER

1. Take out the upper drawer by lifting it up.

2. Slightly pull the left support guard (1_) to the left, allowing the pizza pocket ((_) just enough room to slip off the hook. Then pull the pizza pocket (_) forward.

3. Lift up the bottom of the support guard ((_) and pull it inward to remove it.

Do it again, for right side.

Be careful not to break the parts.

CAUTION

4. Take out the lower basket ((_) by lifting the basket up from the rail system.

5. Remove 4 hex head bolts from both sides with a socket wrench (10mm).

6. Lift up the freezer door from the rails.

____--_ Sett-_g Up 11

Z_ Putting too much food into the freezer drawers can

....... prevent the freezer from closing completely and can

cause frost build-up.

REATTACHING THE REFRIGERATOR DOORS

Assemble the refrigerator doors

Reattach the lower left and right door hinges (iT}). With

a Philips head screwdriver, insert the screw (1_) into the lower left and right door hinges, and then tighten.

Insert the 2 hex head bolts (1_) into the lower left and right door hinges, and then tighten with an allen wrench (3/16").

. Place the hole in the bottom of the door over the door

hinge (1_).

Be careful not to miss the hinge cap because it can

be easily taken off.

Insert the upper hinges (_) into the holes at the top

of the doors. Insert the 3 hex head bolts ([_) into the upper left and right door hinges, and then tighten with a

socket wrench (10mm). Insert the ground screw

(_) into the upper left and right door hinges, and then

tighten with a philips screwdriver (+).

Socket wrench

12 Setti]g Up

REATTACHING THE REFRIGERATOR DOORS

4. Connect the water line ((_) and then insert a clip on the coupler with pulling tube. Connect the one

connector ((_) on left side door, the other connector (1_) on right side door and two connectors (1_}) at each side of the top cap.

[_ The clip is enveloped inside of the top cap.

Door Tube

Position the top table (l_) in place. Insert the 3 screws into the top table, and tighten with a philips

screw driver (+). Open the door, reinsert the cap top

table ((_) and close the doors.

When reattaching the top table, make sure that the wires are not pressed or damaged by the hinge cover.

_ fter assembling, close the door and check to see

whether the door has gaps between gaskets or is tilted. If they are, please refer to "Adjusting the level" on page 15.

Sett _g Up 13

ASSEMBLE THE FREEZER DRAWER

1. Pull out the rails fully on each side of the cabinet.

2. Attach the freezer door front onto the open slots on the sides.

3. Tighten 4 hex head bolts completely with a socket wrench(10mm).

4. Insert the lower basket ([_) into the rail system.

5. Hook the ends of the tilting pocket ((_) onto the brackets ((_) and push down until they are locked into place.

[_ Remove 2 pieces of tape ([_) attached to the side of the drawer bin.

Reattach the tape in the same position when moving the refrigerator to

prevent scratching the drawer bin.

14 Setti]g Up

ADJUSTING THE LEVEL

Make sure the refrigerator is level so that you can make final adjustments. Use a level to test if the refigerator is level both side to side and back to front. If the refrigerator is not level, it will not be possible to get the doors perfectly even, which may cause moisture condensation and increased energy bills. Below is an example of how

to level the refrigerator if the left side of the refrigerator is lower than the right side.

How to adjust the level

1. Open the freezer drawer and remove the lower basket. (See to page 11)

2. Remove the two screws (@) attached to the cover leg front (1_) with a Philips screwdriver(+).

3. Remove the cover leg front (1_) by lifting the bottom part of the cover leg front up and pulling it out.

4. Insert a flat-blade screwdriver (-) into a notch on the left control lever, and turn it count clockwise to level the refrigerator. (You turn the lever clockwise to lower the refrigerator and counterclockwise to raise it.)

flat-blade screwdriver(-) Control Lever Control Lever flat=blade screwdriver(=)

Z_ Both control levers must be touching the floor to avoid possible personal injury or property damage because of

....... tipping.

If the right side is lower, perform the same procedure, but with the right control lever. It is difficult to remove the cover leg front from the refrigerator, so we do not recommend making small adjustments

with the control lever. Instead, refer to the next page for the best way to make minor adjustments to the doors.

Setti'_g Up 15

MAKING MINOR ADJUSTMENTS BETWEEN DOORS

Remember, a leveled refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the refrigerator.

When the right

door is higher

than the left

door.

Fixed

ustment

_rt

When the right door is lower

than the left door.

_The left door is fixed. To make minor adjustments between doors, adjust only the right door.

1. Pull out the freezer drawer ((_) to expose the lower hinge (_).

2. Insert the supplied allen wrench (3/16") (_) into the shaft (_) of the lower hinge.

3. Please adjust the height by turning the hex wrench ((_) clockwise ( ) or counter-clockwise ( ).

_When you turn the hex wrench counter-clockwise( ), the door will move up.

After adjusting the doors, please insert the supplied fastener ((_) using a pliers ((_) in the gap between the hinge-grommet (_}) and the lower hinge (_)). The number of fastener you'll need to insert depends

on the gap.

_2 fastener are enclosed with the refrigerator. The thickness of each fastener is 0.04".

16 Setti]g Up

ADJUSTING THE FREEZER DRAWER LEVEL

Adjustment part

1. Locate the height-adjuster ((1}) in the freezer drawer. Unscrew the 8 Phillips screws (l_) slightly to loosen the door.

Freezer Drawer

2. Loosen the controller screw (_) with a Phillips screwdriver (+).

3. Find the best level to align the door slope.

Example) The slope is about 0.08inch (2mm) as shown below.

- Rotate the height adjuster to -2.0 to reduce the door slope.

plane------_,

•-_ After adjustment, tighten the controller screw (_) and then the philips screws. Sett'_g Up 17

INSTALLING A WATER LINE KIT

To help promote better health, the water filter removes unwanted particles from your water. However, it does not sterilize or destroy microorganisms. You may need to purchase a water purifying system to do that.

For the ice maker to operate properly, a water pressure of 20-125 psi is required.

Within this water pressure range, a 170 cc (5.75 oz.) cup fills in about 10 seconds.

If the refrigerator is installed in an area with low water pressure (below 20psi), you can install a booster pump to compensate for the low pressure.

Water line installation kits are available at extra cost from your dealer. We recommend using a water line

installation kit that contains copper tubing and 1/4,,compression nut.

Connecting to the water supply line

1. First, shut off the main water supply.

2. Locate the nearest cold water drinking line and install the pipe clamp and shut off valve.

Cold water line

Pipe clamp

Shut off valve

3. Connect the water line installation kit to shut off valve. Check for leaks, then go to Connecting the Water Supply Line to the Refirgerator on the next page.

Cold water line - Water line installation kit

Pipe clamp

Shut off valve

18 Settinr_ Up

CONNECTING THE WATER SUPPLY LINE TO THE REFRIGERATOR

Connecting the water supply line to the refrigerator. There are several items that you need to purchase to complete this connection.

You may find these items sold as a kit at your local hardware store.

Use Copper Tubing

• 1A"copper tubing 1A"compression nut (1pc)

Ferrule (2pc)

Use Plastic Tubing "_A" plastic tubing

Molded end(Bulb)

X" compression nut (1pc)

Refrigerator

Plastic Tubing

Compression

Nut (1/4")

(Assembled)

...... A ...... •

Ferrule , " Molded end(Bulb)

(Not supplied) _

Copper l_ubing'or Plas{ic't-ub]ng®

(Not supplied) (Not supplied)

" i [ (1/4")(Not supplied)

(Assembled)

Compression Fitting (Assembled)

::::::::_ Compression nut@

Household water supply line

1. Connect the household water line to the assembled compression fitting.

- If you are using copper tubing, slip the compression nut ® (not supplied) and ferrule (not supplied) on

copper tubing (not supplied) as shown.

- If you are using plastic tubing @, insert the molded end (Bulb) of the plastic tubing @into the compression fitting.

A Do not use without the molded end (Bulb) of the plastic tubing ®.

CAUTION

2. Tighten the compression nut ® onto the compression fitting. Do not over-tighten the compression nut ®.

3. Turn the water on and check for any leakage. If you see water drops or leakage in the connection areas, turn off the main water supply. Check the connections, and tighten more if necessary.

4. Let the ice maker make ice for 1 to 2 days. Over that period of time, throw out the first 1 or 2 buckets of ice the ice maker makes to ensure all impurities have been removed from the water line.

5. Check again for leaks. If you see water drops or leakage in the connection area, turn off the main water supply. Check the connections, and tighten more if necessary.

Only connect the water line to a drinkable water source. If you have to repair or disassemble the water line, cut off 1/4" of the plastic tubing to make sure you get a snug,

leak-free connection.

Settqg Up 19

COMPLETING THE SET UP

Now that you have your new refrigerator installed in place, you are ready to set up and enjoy the features and functions of the appliance. By completing the following steps, your refrigerator should be fully

operational.

1. Make sure your refrigerator is in an appropriate location with reasonable clearance between it and the

wall. Refer to installation instructions in this manual.

2. Once the refrigerator is plugged in, make sure the interior light comes on when you open the doors.

3. Set the Temperature control to the coldest temperature and wait for an hour. The freezer will get slightly chilled and the motor will run smoothly.

Reset the refrigerator and freezer to the temperatures you want.

4. After you plug the refrigerator in, it will take a few hours to reach the appropriate temperature. You can store food and drinks in the refrigerator after the temperature is sufficiently cool.

If condensation or water drops appears on both sides of fridge door's central part, turn the Energy

Saver mode off after removing the condensation. (See the explanation on Energy Saver button in the USING THE CONTROL PANEL.)

20 Settinr_ Up

Oc>eratnavo(JrFrenchDo r Refraerat

[ k_J j k_J

USING THE CONTROL PANEL & DISPLAY

-2_FisRecommended 38°F is Recommended

Ice off Button Press the Ice Off button (_) if you don't want to make more ice. The icon (_) lights up and the Ice-Maker

stops making ice.

Cooling Off (Hold 3 sec)

if the following occurs, turn off the ice maker.

- There is enough ice in the ice bucket.

- You want to save on water and energy.

- Water is not being supplied to refrigerator. If the ice maker function is ON, and the water line is not connected, you will hear a water valve

CAUTION

noise from the back of the unit. Press the Ice Off button until the ice Off indicator ('o_t,) illuminates.

If you want to fill the ice cube bucket to maximum capacity after installation, follow these steps:

1. After the refrigerator turns on for the first time, check the display to see whether the Ice Off light is ON or OFR If the Ice Off light is ON, press the Ice Off button.

2. Allow your refrigerator to operate and cool down for 24 hours (or 1 full day). Waiting 24hours will allow your ice maker to cool properly.

3. After 24 hours or one full day, press the Ice Off button again.

CAUTION

If ice doesn't come out, press the test button located on the right side of ice maker.

Do not press the test button continuously when the tray is filled with ice or water. Water may overflow or the ice may become jammed.

Use only the ice maker provided with the refrigerator.

The water supply to this refrigerator must be installed/connected

by a suitably qualified person and connected to a potable water supply only. To operate the ice maker properly, water pressure of 20-125psi is

required.

Do not try to disassemble the ice maker. Testbutton

38°F is Recommended e (Hold 3 sec)

USING THE CONTROL PANEL & DISPLAY

Power Freeze Button

Press the Power Freeze button ([_) if you want products to freeze more quickly in the freezer. The icon (@) lights up and the inside temperature of the freezer, decreases for about two and a half hours. To turn off Power Freeze before the 2 1/2 hours are up, just press the button again to cancel the Power

Freezer mode.

ceOff

Power Freeze Fzeezer

old 3 sec)

-2°F is Recommended 38°F is Recommended Filter Chancte (Hold 3 sec)

Fridge Power Coo_

If you select the Power Freeze mode, you may hear a little of noise because of the continuous

operation of the compressor.

Power Cool Button

Press the Power Cool button (@) if you want products to cool more quickly in the fridge. The icon (_)) lights up and the inside temperature of the fridge decreases for about two and a half hours. To turn off

Power Cool before the 2 1/2 hours are up, just press the button again to cancel the Power Cool mode.

Power Freeze Freezer

Cooling Off (Hold 3 sec) -2°F is Recommended 38°F is Recommended

If you select the Power Cool mode, you may hear a little of noise because of the continuous

operation of compressor.

Frdge Power Coo_

Filter Change (Hold 3 s

Freezer Button

Press the Freezer button ((_) repeatedly until the desired temperature is shown in the display (_). Whenever you press the button, the temperature will move 2°F degrees with each push. You can set the temperature between 8°F and -8°R Five seconds after the new temperature is set, the display will again show the actual current freezer temperature until a new temperature is selected.

Frdge Pewe!' Coo_

ce Off

-2°F is recommended.

38°F is Recommended Filter Chanqe (Hold 3 sec)

Fridge Button

Press the Fridge button ([_) repeatedly until the desired temperature is shown in the display ((_). Whenever you press the button, the temperature will move 2°F degrees with each push. You can set the temperature between 46°F and 34°R

Power Freeze Freezer

Cooling Off (Hold 3 sec) -2°F is Recommended

38°F is recommended.

The temperature of the freezer and fridge may rise if you open the doors too frequently or if you

38°F is Recommended Filter

Fridge Power Coo_

place a large amount of warm or hot food inside. This may cause the digital display to blink. Once

the freezer and refrigerator temperature return to their normal set temperatures, the blinking stops.

If the blinking continues, you may need to "reset" the refrigerator. Try unplugging the appliance,

waiting for around 10 minutes, and then plugging the power cord back in.

E.Saver Button

Press the E.Saver Button (1_) for better energy efficiency. If E. Saver mode is ON, the button will light up

blue.

Power Freeze Freezer Fridge Power Cool

Cooling Off (Hold 3 sec) -2°F is Recommended 38 °F is Recommended Filter Change (Hold 3 sec)

If condensation occurs on the doors, wipe up the water drops and ......................................

turn the E.Saving function off. ,,

Cooling Off Mode

This function is for store display refrigerators. It is not for customer use.

,/_ In Coolong Off Mode, the refrigerator's lights go on, but doesn't make cool air. To cancel this

oAuT,o,mode, press the Power Freeze and Freezer buttons at the same time for 3 seconds until you hear

a "Ding-Dong" sound. The unit will now cool.

Power Freeze Freezer

38°F is Recommended Filter Change (Hold 3 sec)

Fridge Power Coo_

+ 53 hidden pages