Operating your French Door Refrigerator
USING THE CONTROL PANEL & DISPLAY
1 2 3 4 5 6
BA
Ice off Button
Press the Ice Off button (
1
) , if you don’t want to make more ice. The icon (
) will light up the Ice-Maker
stops making ice.
In this case of following, it is recommended to stop making ices.
- There are enough ices in the ice bucket.
- You want to save on water and energy.
- Water does not supply to refrigerator.
If ice maker function is ON, and water line is not connected, there will be a water valve noise from
back of unit. Press the Ice Off button until Ice Off indicator(
) illuminated.
If you want to ll the case ice cube to maximum capacity after installation, make sure to do the following
steps.
1. Check the display whether the Ice off light(
) is ON or OFF. If the Ice off light is ON, press the
Ice off button (
1
).
2. Allow your refrigerator to operate and cool down for 24 hours (or 1 full day). Waiting 24hours will
allow your ice maker to cool properly.
• In case ice doesn’t come out, press the test button located on the right side of ice maker.
• Do not press the test button continuously, when the tray is lled with ice or water. Water may
overflow or ice jamming may occur.
• Use only the ice maker provided with the refrigerator.
• The water supply to this refrigerator must only be installed/
connected by a suitably qualified person and connect to a
protable water supply only.
• In order to operate the ice maker properly, water pressure of
20~125psi is required.
• Do not try to disassemble the ice maker.
CAUTION
CAUTION
Test button
Check the
water level