Samsung RF26J7500WW/AA, RF26J7500SR/AA, RF26J7500BC/AA User Manual

Refrigerator
user manual
RF26J7500*
imagine the possibilities
Thank you for purchasing this Samsung product.
Free Standing Appliance
DA68-02601D-00.indb 1 14. 11. 24.  11:08
Contents
SAFETY INFORMATION ……………………………………………………………… 2 SETTING UP YOUR FRENCH DOOR REFRIGERATOR ………………………… 9 OPERATING YOUR FRENCH DOOR REFRIGERATOR ………………………… 18 TROUBLESHOOTING …………………………………………………………………36
Safety information
SAFETY INFORMATION
Important safety symbols and precautions:
WARNING
Hazards or unsafe practices that may result in severe personal injury or death.
CAUTION
Hazards or unsafe practices that may result in minor personal injury or property damage.
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions carefully.
Unplug the power plug from the wall socket.
Make sure the refrigerator is grounded to prevent electric shock.
Call the contact center for help.
Note.
These warning symbols are here to prevent injury to you and others. Please follow them carefully. After reading this section, keep it in a safe place for future reference.
WARNING
STATE OF CALIFORNIA PROPOSITION 65 WARNING (US ONLY)
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
English - 2
DA68-02601D-00.indb 2 14. 11. 24.  11:08
WARNING
CRITICAL INSTALLATION WARNINGS
• Do not install the refrigerator in a damp location or place where it may come in contact with water.
- Deteriorated insulation on electrical parts may cause an electric shock or fire.
• Do not place this refrigerator in direct sunlight or expose it to the heat from stoves, room heaters, or other appliances.
• Do not plug several appliances into the same multiple power strip. The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matches the voltage listed on the refrigerator’s rating plate.
- This provides the best performance and also prevents overloading of house wiring circuits, which could cause a fire hazard from overheated wires.
• If the wall socket is loose, do not insert the power plug.
- There is a risk of electric shock of fire.
• Do not use a power cord that has cracks or abrasion damage along its length or at either end.
• Do not bend the power cord excessively or place heavy objects on it.
• Do not twist or tie the power cord.
• Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power cord into the space behind the appliance.
• When moving the refrigerator, be careful not to roll over or damage the power cord.
- This may result in an electric shock or fire.
• Never unplug your refrigerator by pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet.
- Damage to the cord may cause a short-circuit, fire, and/or electric shock.
• Do not use aerosols near the refrigerator.
- Using aerosols near the refrigerator may cause an explosion or fire.
• Do not install this appliance near a heater or inflammable material.
English - 3
• Do not install this appliance in a humid, oily, or dusty location, or in a location exposed to direct sunlight or water (rain, etc.).
• Do not install this appliance in a location where gas may leak.
- This may result in an electric shock or fire.
• This refrigerator must be properly located and installed in accordance with the instructions in this manual before you use it.
• Connect the power plug in the proper position with the cord hanging down.
- If you connect the power plug upside down, the wire can get cut off and cause a fire or electric shock.
• When moving the refrigerator, be careful not to roll over or damage the power cord.
- This constitutes a fire hazard.
• Make sure that the power plug is not crushed or damaged by the back of the refrigerator.
• Keep the packing materials out of reach of children.
- There is a risk of death from suffocation if a child puts the packing materials on his or her head.
• The appliance must be positioned so that the plug is accessible after installation.
- Failing to do so may result in an electric shock or fire due to electric leakage.
• You need to remove all the protective plastic film before you initially plug the product in.
• Children should be supervised to ensure that they do not play with the fastener.
- There is a risk of death from suffocation if a child swallows the fastener. Pay special attention to children because it can be dangerous. Keep the fastener out of reach of children.
• The refrigerator must be safely grounded.
- Always make sure that you have grounded the refrigerator before attempting to investigate or repair any part of the appliance. Power leakages can cause severe electric shock.
• Never use gas pipes, telephone lines, or other potential lightning attractors as an electrical ground.
- Improper use of the grounding plug can result in a risk of electric shock.
SAFETY INFORMATION
DA68-02601D-00.indb 3 14. 11. 24. �� 11:08
If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-blade grounding plug and a 3-slot receptacle that will accept the plug on the appliance. The marked rating of the extension cord should be AC 115-120 V, 10 A, or more. If a grounding adapter is used, make sure the receptacle box is fully grounded.
• Plug the power plug into the wall socket firmly. Do not use a damaged power plug, damaged power cord, or loose wall socket.
- This may result in an electric shock or fire.
- Always balance the load on each door.
- Overload on any one door may fell the refrigerator, causing physical injury.
• We strongly recommend you have a qualified technician or service company install the refrigerator.
- Failing to do so may result in an electric shock, fire, explosion, problems with the product, or injury.
• If the power cord is damaged, have it replaced immediately by the manufacturer or one of its service agents.
CAUTION
INSTALLATION CAUTIONS
• Allow sufficient space around the refrigerator and install it on a flat surface.
- If your refrigerator is not level, cooling efficiency and durability can be declined.
- Keep the ventilation space in the appliance enclosure or mounting structure clear of obstructions.
• Allow the appliance to stand for 2 hours before loading foods after installation and turning on.
- When installing the refrigerator, make sure both legs contact the floor for secure installation. Legs are located at the bottom back of freezer door. Insert a flathead screwdriver and turn it in the direction of the arrow until it is level.
English - 4
WARNING
CRITICAL USAGE WARNINGS
• Do not insert the power plug into a wall socket with wet hands.
• Do not store articles on the top of the appliance.
- When you open or close the door, the articles may fall and cause personal injury and/or material damage.
• Do not insert hands, feet or metal objects (such as knives, etc.) into the bottom or the back of the refrigerator.
- This may result in an electric shock or injury.
- Any sharp edges may cause a personal injury
• Do not put a container filled with water on the refrigerator.
- If spilled, there is a risk of fire or electric shock.
• Children should be supervised to ensure that they do not play with the appliance.
- Keep fingers out of “pinch point” areas. Clearances between the doors and cabinet are necessarily small. Be careful when you open the doors if children are in the area.
• Do not let children hang on the door. A serious injury may occur.
• Do not let children go inside the refrigerator. They could become trapped.
• Do not insert your hands into the bottom area under the appliance.
- Any sharp edges may cause personal injury.
• Do not let children step on a drawer cover.
- The drawer may break and cause them to slip.
• Do not overfill the refrigerator with food.
- When you open the door, an item may fall out and cause personal injury or material damage.
• Do not touch the inside walls of the freezer or products stored in the freezer with wet hands.
DA68-02601D-00.indb 4 14. 11. 24. �� 11:08
- This may cause frostbite.
• Never put fingers or other objects into the water dispenser hole, ice chute, or ice maker bucket.
- It may cause personal injury or material damage.
• Do not use or place any substances sensitive to temperature such as inflammable sprays, inflammable objects, dry ice, medicine, or chemicals near or inside the refrigerator.
• Do not keep volatile or inflammable objects or substances (benzene, thinner, propane gas, alcohol, ether, LP gas, and other such products) in the refrigerator.
- This refrigerator is for storing food only.
- This may result in fire or explosion.
• Do not store pharmaceutical products, scientific materials, or temperature sensitive products in the refrigerator.
- Products that require strict temperature controls must not be stored in the refrigerator.
• Do not place or use an electrical appliance inside the refrigerator, unless it is of a type recommended by the manufacturer.
• Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance. This may result in an electric shock, fire, problems with the product, or injury. Do not put a container filled with water on the appliance.
- If spilled, there is a risk of fire or electric shock.
• Do not use mechanical devices or any other means to accelerate the defrosting process, other than those recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not spray volatile material such as insecticide onto the surface of the appliance.
- As well as being harmful to humans, it may also result in an electric shock, fire, or problems with the product.
• Never stare directly at the UV LED lamp for long periods of time.
- This may result in eye strain due to the ultraviolet rays.
• Do not attempt to repair, disassemble, or modify the appliance yourself.
• Do not use any fuse (such as cooper, steel wire, etc.) other than a standard fuse.
• If your appliance needs to be repaired or
English - 5
reinstalled, contact your nearest service center.
- Failing to do so may result in an electric shock, fire, problems with the product, or injury.
• If the interior or exterior LED lamp has gone out, please contact your nearest service center.
• Children should be supervised to ensure that they do not play with the appliance.
- Keep fingers out of “pinch point” areas. : Clearances between the doors and cabinet are necessarily small. Be careful when you open the doors if children are in the area.
• Do not let children hang on the door. A serious injury may occur.
• Do not let children go inside the refrigerator. They could become trapped.
• Bottles should be stored tightly together so that they do not fall out.
• This product is intended only for the storage of food in a domestic environment.
• If a gas leak is detected, avoid any naked flames or potential sources of ignition, and air the room in which the appliance is standing for several minutes.
- Do not touch the appliance or power cord.
- Do not use a ventilating fan.
- A spark may result in an explosion or fire.
• Use only the LED Lamps provided by the manufacturer or its service agents.
• If the refrigerator emits a burning smell or smoke, unplug the refrigerator immediately and contact your Samsung Electronics service center.
• If you experience difficulty changing a non-LED light, contact a Samsung service center.
• If the product is equipped with LED Lamps, do not disassemble the Lamp Covers and LED Lamps yourself.
- Please contact your service agents.
• If dust or water enters the refrigerator, unplug the refrigerator and contact your Samsung Electronics service center.
- There is a risk of fire.
SAFETY INFORMATION
DA68-02601D-00.indb 5 14. 11. 24. �� 11:08
CAUTION
USAGE CAUTIONS
• Do not re-freeze frozen foods that have thawed completely. Do not place carbonated or fizzy drinks in the freezer compartment. Do not put bottles or glass containers in the freezer.
- When the contents freeze, the glass may break and cause personal injury.
• Use only the ice maker provided with the refrigerator.
• Have the refrigerator’s water supply connected only to a potable water supply. To operate the ice maker properly, water pressure of 20 ~ 125psi (138 ~ 862kPa) is required. If you will be away from home for a long period of time (on vacation, for example) and won’t be using the water or ice dispensers, close the water valve.
- Otherwise, water leakage may occur.
• If you won’t be using the refrigerator for a very long period of time, (3 weeks or more) empty the refrigerator including ice bucket, unplug it, close the water valve, wipe excess moisture from the inside walls, and leave the doors open to prevent odors and mold.
• Service Warranty and Modification.
• Any changes or modifications performed by a 3rd party on this finished appliance are not covered under Samsung warranty service, nor is Samsung responsible for safety issues that result from 3rd party modifications.
• Do not block the air vents inside the refrigerator.
- If the air vents are blocked, especially with a plastic bag, the refrigerator can be over cooled. If this cooling period lasts too long, the water filter may break and cause water leakage.
• If the refrigerator is disconnected from the power supply, you should wait for at least five minutes before plugging it back in.
• If you have a long vacation planned or do not intend to use the refrigerator for a long period of time, (3 weeks or more) empty the refrigerator including ice bucket, pull out the power plug, close the water valve, wipe excess moisture from the inside walls, and leave the doors open to prevent odors and mold.
• To get the best performance from the product:
- Do not place food too close to the vents at the rear of the appliance as it can obstruct free air circulation in the refrigerator compartment.
- Wrap food up properly or place it in airtight containers before putting it into the refrigerator.
- Do not place glasses, bottles, or carbonated beverages in the freezer. These items may freeze and break. Broken glasses, bottles, and beverage containers can cause injury.
- Please observe maximum storage times and expiration dates of frozen goods.
- There is no need to disconnect the refrigerator from the power supply if you will be away for less than three weeks. However, if you will be away for more than three weeks, remove all the food and ice in the ice bucket, unplug the refrigerator, close the water valve, wipe excess moisture from the inside walls, and leave the doors open to prevent odors and mold.
• Fill the water tank and ice cube trays with potable water only (tap water, mineral water, or purified water).
- Do not fill the tank with tea or a Sports drink. This may damage the refrigerator.
• Do not strike or apply excessive force to any glass surface.
- Broken glass may result in a personal injury and/or property damage.
• If the product is flooded, make sure to contact your nearest service center.
- There is a risk of electric shock or fire.
English - 6
DA68-02601D-00.indb 6 14. 11. 24. �� 11:08
CAUTION
WARNING
CLEANING CAUTIONS
• Do not spray water directly on the inside or outside the refrigerator.
- There is a risk of fire or electric shock.
• Do not use a hair dryer to dry the inside of the refrigerator.
• Do not place a lighted candle in the refrigerator to remove bad odors.
- This may result in an electric shock or fire.
• Use a clean, dry cloth to remove any foreign matter or dust from the power plug blades. Do not use a wet or damp cloth when cleaning the plug.
- Otherwise, there is a risk of fire or electric shock.
• Before cleaning or performing maintenance, unplug the appliance from the wall socket.
- Failing to do so may result in an electric shock or fire.
CRITICAL DISPOSAL WARNINGS
DANGER : Risk of child entrapment. Before you throw away your old refrigerator or freezer:
- Take off the doors and door latch.
- Leave the shelves in place so that children cannot easily climb inside.
- Children trapped inside a refrigerator can hurt themselves or suffocate to death.
• Please dispose of the packaging material from this product in an environmentally friendly manner.
• Ensure that none of the pipes on the back of the appliance are damaged prior to disposal.
• R-600a or R-134a is used as a refrigerant. Check the compressor label on the rear of the appliance or the rating label inside the fridge to see which refrigerant is used for your refrigerator. If this product contains flammable gas (Refrigerant R-600a), contact your local authority in regard to safe disposal of this product.
• When disposing of this refrigerator, remove the door/door seals and door latch so that small children or animals cannot become trapped inside. Children should be supervised to ensure that they do not play with the appliance. If trapped inside, the child may get hurt or suffocate to death.
• Cyclopentane is used in the insulation. The gases in the insulation material require a special disposal procedure. Please contact your local authorities in regard to the environmentally safe disposal of this product.
• Keep all packaging materials well out of the reach of children, as packaging materials can be dangerous to children.
- If a child places a bag over his or her head, the child could suffocate.
SAFETY INFORMATION
English - 7
DA68-02601D-00.indb 7 14. 11. 24. �� 11:08
ADDITIONAL TIPS FOR PROPER USAGE
• In the event of a power failure, call the local office of your Electricity Company and ask how long it is going to last.
- Most power failures that are corrected in an hour or two will not affect your refrigerator temperatures. However, you should minimize the number of door openings while the power is off.
- Should the power failure last more than 24 hours, remove and discard all frozen food.
• The appliance might not operate consistently (frozen contents can thaw or temperatures can become too warm in the frozen food compartment) when sited for an extended period of time in a location where ambient air temperatures are constantly below the temperatures for which the appliance is designed.
• In case of particular foods, keeping it under refrigeration can have a bad effect on preservation due to its properties.
• Your appliance is frost free, which means there is no need to manually defrost your appliance. This will be carried out automatically.
• Temperature rise during defrosting complies with ISO requirements. But If you want to prevent an undue rise in the temperature of frozen food while the appliance defrosts, wrap the frozen food in several layers of newspaper.
• Do not re-freeze frozen foods that have thawed completely.
Saving Energy Tips
- Install the appliance in a cool, dry room with adequate ventilation. Ensure that it is not exposed to direct sunlight and never put it near a direct source of heat (a radiator, for example).
- Not to block any vents and grilles is recommended for energy efficiency.
- Allow warm food to cool down before placing it in the appliance.
- Put frozen food in the refrigerator to thaw. You can then use the low temperatures of the frozen products to cool food in the refrigerator.
- Do not keep the door of the appliance open for too long when putting food in or taking food out. The shorter the time the door is open, the less frost build-up you’ll have in the freezer.
- It is recommended to install the refrigerator with clearance to the back and sides. This will help reduce power consumption and keep your energy bills lower.
English - 8
DA68-02601D-00.indb 8 14. 11. 24. �� 11:08
Setting up your French Door Refrigerator
GETTING READY TO INSTALL THE REFRIGERATOR
Congratulations on your purchase of this Samsung French Door Refrigerator. We hope you enjoy the state-of-art features and efficiencies that this new appliance offers.
Selecting the best location for the refrigerator
Choose:
• A location with easy access to a water supply.
• A location without direct exposure to sunlight.
• A location with level (or nearly level) fl ooring.
• A location with enough space for the refrigerator doors to open easily.
• A location that allows suffi cient space to the right, left, back, and top for air circulation. If the refrigerator does not have enough space, it can cause the bad infl uence to refrigeration effi ciency and power consumption.
• A location that allows you to move the refrigerator easily if it needs maintenance or service.
• Do not install the refrigerator in locations where the temperature is over 110°F (43°C) or below 50°F (10°C ).
B
B
AA
E
E
D
C
C
Model RF26J*
Depth “A” 34” (863mm)
Width “B” 32 3/4” (830mm)
Height “C” 68 7/8” (1749mm)
Overall Height “D” 70” (1777mm)
Depth “E” 36 1/2” (925mm)
2"
(50mm)
125° 125°
56 1/4" (1430mm)
32 3/4" (830mm)
4 2/8" (106mm)
1 6/8" (45mm)
29 5/8"
(753mm)
D
11 6/8"
(300mm)
SETTING UP
47 2/8" (1200mm)
52 5/8" (1335mm)
• Each measurement based on the design dimension, so it may differ depending on the measuring method.
English - 9
DA68-02601D-00.indb 9 14. 11. 24. �� 11:08
CAUTION
When moving your refrigerator
To prevent floor damage, be sure the front adjusting legs are in the up position (above the floor). Refer to ‘Leveling the Refrigerator’ on page 14.
REQUIRED TOOLS
Required Tools (Not provided)
You need the following tools to complete the installation of your refrigerator:
Flat-blade screw driver (-)
Control Lever
Flooring
For proper installation, you must place this refrigerator on a level, hard surface that is the same height as the rest of the floor. This surface should be strong enough to support a fully loaded refrigerator. To protect the finish of the flooring, cut a large section of the cardboard carton and place it under the refrigerator where you are working. When moving the refrigerator, you need to pull and push it straight forwards or back. Do not wiggle it from side to side.
Philips
screwdriver (+)
Flat-blade screw
driver (-)
Allen wrench
Socket wrench
English - 10
DA68-02601D-00.indb 10 14. 11. 24.  11:08
REMOVING THE REFRIGERATOR DOORS
For some installations, you need to remove the fridge and freezer drawers so you can move the refrigerator to its final location. Do not remove the doors/drawer if you don’t need to. If you do not need to remove the refrigerator doors, go to ‘Leveling the Refrigerator’ on page
14. If you need to remove the doors. continue below. Before removing the door/drawer, make sure you read the following items:
With the door opened
1. Remove 3 screws holding down the TOP TABLE (1) and separate the connected wires.
(1)
SETTING UP
WARNING
Disconnect power to the refrigerator before removing the door or drawer.
• Be careful not to drop, damage or scratch the door / drawer while removing them.
• Be careful not to injure yourself while removing the doors / drawer.
• Reattach the door/drawer properly to avoid:
- Moisture from air leakage.
- Uneven door alignment.
- Wasting energy due to improper door seal.
WARNING
Disassembling the refrigerator doors
Be careful not to drop and scratch the doors while removing them.
2. Disconnect two connectors (2) on the left side door. To remove the water coupler from the hinge, twist and pull it from the hinge. Remove the water line (3) while pressing the marked part (4) of the water line coupler.
(2)
Red Clip (1/4")
(3)
(4)
CAUTION
If a red clip is on the coupler, you must remove it before removing the tube.
CAUTION
Keep the clips out of the reach of children and make sure that children do not play with them or put them into their mouths.
English - 11
DA68-02601D-00.indb 11 14. 11. 24. �� 11:08
3. Pull and remove the hinge lever (5). Remove the ground screw (6) attached to the upper left door hinges with a philips screwdriver (+). Remove the upper left and right door hinges (7).
REATTACHING THE REFRIGERATOR DOORS
To reattach the fridge doors after you have moved the fridge to its final location, assemble the parts in reverse order.
(5)
(7)
(6)
4. Lift the door straight up to remove.
5. Remove the screw (8) attached to the lower left and right door hinges with a philips screwdriver (+). Remove the 2 hex head bolts (9) attached to the lower left and right door hinges with an allen wrench (3/16”). Remove the lower left and right door hinges (10).
1. The Water Line must be fully inserted into the center of the transparent coupler (Type A) or the Guide Lines (Type B) to prevent water leakage from the dispenser.
2. Insert the clip in the install pack, and then confirm that it holds the line firmly.
Type A Type B
Dispenser
Center of Transparent
coupler
clip A (1/4”) (6.35mm)
The Guide Lines
clip A (1/4”) (6.35mm)
DISASSEMBLE THE FREEZER DRAWER
1. Take out the upper drawer by lifting it up.
(10)
(8)
(9)
Allen wrench
2. Take out the lower basket (2) by lifting the basket up from the rail system.
(2)
English - 12
DA68-02601D-00.indb 12 14. 11. 24. �� 11:08
CAUTION
You can scratch the side of the bin if you twist it left or right when disassembling or re-assembling it.
3. Press the fixing hook of the rail system.
4. Holding the top of the Freezer Drawer, pull it out all the way, and then remove it from the rail system.
CAUTION
Be careful not to scratch or dent the sliding rail by letting it strike the floor.
CAUTION
Putting too much food into the freezer drawers can prevent the freezer from closing completely and can cause frost build-up.
SETTING UP
RE-ASSEMBLE THE FREEZER DRAWER
To reattach the drawer after you have moved the fridge to its final location, assemble the parts in reverse order.
CAUTION
Make sure that you mount the freezer basket in the right position when removing / installing the freezer door. Failing to do so may result in the door not opening or closing properly.
English - 13
DA68-02601D-00.indb 13 14. 11. 24. �� 11:08
LEVELING THE REFRIGERATOR
Make sure the refrigerator is level so that you can make final adjustments. Use a level to test if the refrigerator is level both side to side and back to front. If the refrigerator is not level, you will not be able to get the doors perfectly even, which may cause moisture condensation and increased energy bills. Below is an example of how to level the refrigerator if the left side of the refrigerator is lower than the right side.
How to adjust the level
1. Open the freezer drawer and remove the lower basket.
2. Insert a flat-blade screwdriver (-) into a notch on the left control lever, and then turn it counter- clockwise to level the refrigerator. (You turn the lever clockwise to lower the refrigerator and counterclockwise to raise it.)
If the right side is lower, perform the same procedure, but with the right control lever.
It is difficult to remove the cover leg front from the refrigerator, so we do not recommend making small adjustments with the control lever. Instead, refer to the next page for the best way to make minor adjustments to the doors.
MAKING MINOR ADJUSTMENTS BETWEEN DOORS
Remember, a leveled refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the refrigerator.
flat-blade screwdriver (-)
Control Lever
CAUTION
Both control levers must be touching the floor to avoid possible personal injury or property damage because of tipping.
CAUTION
The refrigerator on an uneven floor may tilt. To prevent this, adjust the leg so that it contacts the floor.
English - 14
Fixed part
Adjustment part
The left door is fixed. To make minor adjustments between doors, adjust only the right door.
1. Pull out the freezer drawer ,then you can see the lower hinge .
Insert a philips screwdriver (+) into the shaft
2.
4
of the lower hinge.
3. Adjust the height by turning a philips screwdriver (+) clockwise ( ) or
3
counterclockwise ( ).
1
1
2
3
UP
2
4
3
DOWN
3
DA68-02601D-00.indb 14 14. 11. 24.  11:08
When you turn a philips screwdriver (+) counterclockwise ( ), the door will
UP
move up.
Water line installation kits are available at extra cost from your dealer. We recommend using a water line installation kit that contains copper tubing and a ¼” compression nut.
INSTALLING THE WATER DISPENSER LINE
A water dispenser with a filter is one of the helpful features on your new refrigerator. To help promote better health, the water filter removes unwanted particles from your water. However, it does not sterilize the water or destroy microorganisms. You may need to purchase a water purifying system to do that. The water line also connects to the ice maker. For the ice maker to operate properly, water
required. If the refrigerator is installed in an area with low
booster pump to compensate for the low pressure. After you have connected the water line, make sure the water storage tank inside the refrigerator is properly filled. To do this, press the water dispenser lever until the water runs from the water outlet.
Connecting to the water supply line
1. First, shut off the main water supply.
2. Locate the nearest cold water drinking line and install the pipe clamp and shut off valve.
Cold water line
Pipe clamp
Shut off valve
3. Connect the water line installation kit to the shut off valve.
Cold water line
Water line installation kit
Pipe clamp
Shut off valve
SETTING UP
English - 15
DA68-02601D-00.indb 15 14. 11. 24.  11:08
Connecting the water supply line to the refrigerator
There are several items that you need to purchase to complete this connection. You may find these items sold as a kit at your local hardware store.
Use Copper Tubing Use Plastic Tubing
• ¼” copper tubing
• ¼” compression nut (1pc)
• Ferrule (2pc)
Compression Nut
(1/4”) (Assembled)
Ferrule
(Not supplied)
Copper tubing
(Not supplied)
Household water supply line
• ¼” plastic tubing Molded end (Bulb)
• ¼” compression nut (1pc)
Refrigerator
Plastic Tubing (Assembled)
Compression Fitting (Assembled)
Plastic tubing (B)
or
(Not supplied)
Molded end (Bulb)
Compression nut (B) (1/4”) (Not supplied)
CAUTION
Do not use without the molded end (Bulb) of the plastic tubing (B).
2. Tighten the compression nut (B) onto the compression fitting. Do not over-tighten the compression nut (B) .
3. Turn the water on and check for any leakage. If you find water drops or leakage in the connection areas, turn off the main water supply. Check the connections and, if necessary, tighten.
4. Flush 1 gallon of water through the filter before drinking or using the water from the refrigerator. (Flush approximately 6 minutes.) To flush, press a large glass or cup against the water dispenser lever. Fill the glass, empty it into the kitchen sink after it is filled, and then repeat.
5. After you turn on the refrigerator, let the ice maker make ice for 1 to 2 days. Over that period of time, throw out the first 1 or 2 buckets of ice the freezer makes to ensure all impurities have been removed from the water line.
Only connect the water line to a drinkable water source. If you have to repair or disassemble the water line, cut off 1/4“ of the plastic tubing to make sure you get a snug, leak-free connection.
You can test the water line quickly using a
1. Connect the household water line to the assembled compression fitting.
- If you are using copper tubing, slip the
paper cup. Under normal conditions, the water dispenser can fill a 5.75oz. (170cc) cup in about 10 seconds.
compression nut (B) (not supplied) and ferrule (not supplied) on the copper tubing (not supplied) as shown.
- If you are using plastic tubing (B), insert the molded end (Bulb) of the plastic tubing (B) into the compression fitting.
English - 16
DA68-02601D-00.indb 16 14. 11. 24. �� 11:08
COMPLETING THE SET UP
Now that you have your new refrigerator installed in place, you are ready to set up and enjoy the features and functions of the appliance. By completing the following steps, your refrigerator should be fully operational.
1. Make sure your refrigerator is in an appropriate location with reasonable clearance between it and the wall. Refer to installation instructions in this manual.
2. Once the refrigerator is plugged in, make sure the interior light comes on when you open the doors.
3. Set the Temperature control to the coldest temperature and wait for an hour. The freezer will get slightly chilled and the motor will run smoothly. Reset the refrigerator and freezer to the temperatures you want.
4. After you plug the refrigerator in, it will take a few hours to reach the appropriate temperature. You can store food and drinks in the refrigerator after the temperature is sufficiently cool.
If condensation or water drops appear on both sides of the fridge door’s central part, turn the Energy Saver mode off after removing the condensation. (See the explanation of the Energy Saver button in “Using the Control Panel” on page 18.)
SETTING UP
English - 17
DA68-02601D-00.indb 17 14. 11. 24. �� 11:08
Operating your French Door Refrigerator
USING THE CONTROL PANEL
RF26J*
(1)
(2)
(3)
(8)
(7)
( 1 ) Freezer / Power Freeze (3sec)
The Freezer button serves two purposes:
- To set the Freezer to your desired temperature.
- To turn the Power Freeze function on and off.
1. To set the Freezer temperature, touch the Freezer button. You can set the temperature between 5°F (-15°C) and -8°F (-23°C).
2. Power Freeze function
Touch and hold this button for 3 seconds to decrease the time needed to freeze products in the Freezer. It can be helpful if you need to quickly freeze easily spoiled items or if the temperature in the freezer has warmed dramatically. (For example, if the door was left open.) When you use this function, the energy consumption of the refrigerator will increase. Remember to turn it off when you don’t need it and return the freezer to your original temperature setting. If you need to freeze a large amount of food, activate the Power Freeze function at least 24 hours before you put the food into the freezer.
(10)
(9)
( 2 ) Alarm / Filter Reset (3sec)
The Alarm button serves two purposes:
- To turn the door open alarm on and off
- To reset the water filter life indicator.
1. Door Alarm Function If the door alarm is set to On, an alarm beeps if
(4)
(5)
(6)
any refrigerator door is left open for more than three minutes. The beeping stops when you close the door. The door alarm function is pre-set to On in the factory. You can turn it off by pressing and then releasing the Alarm button. You can turn it back on in the same fashion. The icon lights up when the function is on. When the Door Alarm function is on and the alarm sound is triggered, the Door Alarm Icon will blink while the alarm sounds.
2. Water Filter Life Indicator Function After you replace the water filter, touch and hold this button for 3 seconds to reset the water filter life indicator. When you reset the water filter life indicator, the Filter icon on the panel turns Off. The Filter icon will turn red to let you know it is time to change the water filter after six months (about 300 gallons). Some areas have large amounts of lime in their water, which causes the water filter to clog more quickly. If this is the case in your area, you will have to change the filter more frequently than every six months.
( 3 ) Energy Saver
Touching this button turns Energy Saver mode on and off. When you turn Energy Saver on, the Energy Saver icon lights. Turn Energy Saver off and the icon goes off. The Energy Saver function automatically turns on when power is supplied to the refrigerator. If condensation or water drops appear on the doors, turn the Energy Saver mode off.
English - 18
DA68-02601D-00.indb 18 14. 11. 24. �� 11:08
( 4 ) Fridge / Power Cool (3sec)
The Fridge button serves two purposes:
- To set the Fridge to your desired temperature.
- To turn the Power Cool function on and off.
1. To set the Fridge temperature, press the Fridge button. You can set the temperature between 44°F (7°C) and 34°F (1°C).
2. Power Cool function
Touch and hold this button for 3 seconds to decrease the time needed to cool products in the Refrigerator. It can be helpful if you need to quickly cool easily spoiled items or if the temperature in the fridge has warmed dramatically. (for example, if the door was left open)
( 5 )
Lighting / °C°F (3sec)
The Lighting button serves two purposes:
- To turn the dispenser light on and off
- To switch the temperature units between ºC and ºF.
1. Light Function Touching the Lighting button turns on the Dispenser LED lamp in continuous mode so that it stays on continuously. The button also lights up. If you want the Dispenser lamp to come on only when some one uses the dispenser, press the Lighting button to turn the continuous mode off.
2. To switch the temperature units between ºC and ºF.
Touch and hold this button for 3 seconds to select the temperature display you want. Each time you press and hold the button, the ºC and ºF temperature modes alternate and the ºC or ºF icon lights up, indicating your selection.
( 6 ) Ice Maker Off
If you don’t want to make more ice, touch the Ice Maker Off button. The icon will light up and the Ice-Maker stops making ice.
We recommend you to stop ice making if the following occur:
- There is enough ice in the ice bucket.
- You want to save water and energy.
- Water is not being supplied to the refrigerator.
If the ice maker function is ON, and the water Line is not connected, there will be a water valve noise from the back of the unit. Press the Ice Maker Off (Control Lock (3sec)) button for less than 3 seconds until the Ice Off Indicator ( ) illuminates.
( 7 ) Water
Touch this button to dispense water. This mode can not be used with the Ice Type mode simultaneously. Water mode shuts off when you touch the Cubed / Crushed Ice button.
To save electricity, the Panel Display turns off automatically under the following conditions: When no button has been pressed, when no doors are open, or when no Dispenser Lever has been pushed. However, the icon indicating your cubed or crushed ice selection, will stay on. When you press a button, open a door, or push a Dispenser Lever, the Panel Display will turn on again. Except for the Energy Saver, Water, and Cubed / Crushed Ice buttons, all function buttons will become operational after you remove your finger from the button you are currently pressing.
OPERATING
English - 19
DA68-02601D-00.indb 19 14. 11. 24. �� 11:08
( 8 ) Filter
Water filter usage
This icon lights up when you need to change the filter, usually after the refrigerator has dispensed about 300 gallons of water (after about 6 months). After you install the new water filter, reset the filter indicator by touching and holding the Hold 3sec for Filter Reset button for 3 seconds.
The icon will blink red for several seconds when you open or close the door.
- If water is not dispensing or dispensing slowly, you need to replace the water filter because the water filter is clogged.
- Some areas have large amounts of lime in their water, which causes the water filter to clog more quickly.
( 9 ) Ice Type
Touch this button to select your desired ice type. Cubed and crushed ice modes alternate when you press the button. This mode can not be used with the Water mode simultaneously.
( 10 ) Ice Maker Off / Control Lock (3sec)
Cooling Off Mode
Cooling Off mode (also called Shop mode), is designed for use by retailers when they are displaying refrigerators on the shop floor. In Cooling Off mode, the refrigerator’s fan motor and lights work normally, but the compressors do not run, and the refrigerator and freezer do not get cold. To start Cooling Off mode, touch and hold the
during normal operation. The refrigerator chime sounds and the temperature display flashes OFF. To cancel Cooling Off mode, touch and hold the Freezer, Alarm and Fridge buttons again for
The Ice Maker Off button serves two purposes:
- To turn the Ice maker on and off
- To turn the Control Lock Function on and off.
1. Ice Off Function If you don’t want to make more ice, press the Ice Maker Off button.
2. Control Lock Function Touch and hold this button for 3 seconds to lock the display and the dispenser buttons so the buttons can not be used. When Control Lock is on, the refrigerator does not dispense ice or water, even if the Dispenser Lever is pressed. The Control Lock icon lights up to indicate you’ve activated the Control Lock function. Press 3 seconds to unlock.
English - 20
DA68-02601D-00.indb 20 14. 11. 24.  11:08
CHANGING THE WATER FILTER
WARNING
To reduce risk of water damage to your property DO NOT use generic brands of water filters in your SAMSUNG Refrigerator.
(2)
(3)
3. Insert the new filter into the filter case (4).
USE ONLY SAMSUNG BRAND WATER FILTERS. SAMSUNG is not legally responsible for any damage, including, but not limited to, property damage caused by water leakage
(Red)
from the use of a generic water filter.
SAMSUNG Refrigerators are designed to work ONLY WITH SAMSUNG Water Filters. The Filter light turns red to let you know when it is time to change your water filter cartridge. To give you time to get a new filter, the red light comes on just before the capacity of the current filter runs out. Changing the filter on time provides you with the freshest, cleanest water from your refrigerator.
1. Shut off the water supply. Then, turn the water filter (1) about 1/4 turn, counter-clockwise.
2. Pull the water filter (1) from the case filter (2).
(2)
(1)
• To change the water filter more easily, shut off the water supply valve.
• Sometimes, it is hard to disassemble the water filter because impurities in the water cause it to stick. If you are having difficulties, grip the water filter firmly and pull it hard.
• When you pull the water filter, a little water can leak from the opening. This is normal. To minimize the water leaks, keep the filter cartridge horizontal when you pull it.
• To prevent overflow, empty the water filter tray (3) and dry around the filter case (2).
(4)
4. Push the filter, and then turn it clockwise until it locks.
• If you have trouble inserting the water filter because of high water pressure, shut off the water supply valve.
• The locked symbol should be lined up with the indicator line.
5. Touch and hold the “Alarm / hold 3 sec for Filter Reset” button (
(Filter Reset)
) for about 3seconds to reset the water filter indicator. The indicator’s red light will turn off.
6. If you turned off the water supply, turn it back on.
For a replacement water filter, visit your local home Improvement center or visit Samsung’s parts distributor on line at:
http://www.samsungparts.com Be sure the replacement water filter has
the SAMSUNG logo on the box and on the water filter.
OPERATING
English - 21
DA68-02601D-00.indb 21 14. 11. 24. �� 11:08
Removing any residual matter inside the water supply line after installing the water filter.
1. Turn ON the the water supply if you turned it off when you installed the water filter.
2. Run water through the dispenser until the water runs clear (approx. 6 to 7 minutes). This will clean the water supply system and remove air from the lines.
3. Additional flushing may be required in some households.
4. Open the Refrigerator door and make sure there are no water leaks coming from the water filter.
Be sure to flush the dispenser thoroughly, otherwise water may drip from the dispenser.
This means that there is still air in the line.
Reverse Osmosis Water Supply IMPORTANT:
The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 35 and 120psi. (241 and 827kPa) If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60psi. (276 to 414kPa) If the water pressure to the reverse osmosis system is less than 40 to 60psi (276 to 414kPa):
• Check if the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.
• Allow the storage tank on the reverse osmosis system to refill after heavy usage.
• If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. Remove the water filter.
If you have questions about your water pressure, call a licensed, qualified plumber.
English - 22
DA68-02601D-00.indb 22 14. 11. 24. �� 11:08
CONTROLLING THE TEMPERATURE
Basic temperature of Freezer and fridge compartments
The basic and recommended temperatures of the Freezer and Fridge compartments are 0°F and 37°F (or -18°C and 3°C) respectively. If the temperature of the Freezer and Fridge compartments are too high or low, adjust the temperature manually.
Controlling the Freezer temperature
RF26J7500SR
Keep in mind that foods such as ice cream may/ melt at 4°F (or -15.5°C). The temperature display will move sequentially from -8°F to 5°F (or from -23°C to -15°C).
Controlling the fridge temperature
RF26J7500SR
The fridge temperature can be set between 34°F and 44°F (or between 1°C and 7°C) to suit your particular needs. Press the Fridge button repeatedly until the desired temperature is shown in the temperature display. The temperature will change by 1°F (or 1°C) with each press. See below.
OPERATING
The Freezer temperature can be set between -8°F and 5°F (or between -23°C and -15°C) to suit your particular needs. Press the Freezer button repeatedly until the desired temperature is shown in the temperature display. The temperature will change by 1°F (or 1°C) with each press. See below.
Fahrenheit : 0°F -1°F -2°F -3°F -4°F -5°F -6°F -7°F -8°F 5°F 4°F 3°F 2°F 1°F 0°F.
Centigrade : -18°C -19°C -20°C -21°C
-22°C -23°C -15°C -16°C -17°C -18°C.
English - 23
Fahrenheit : 37°F 36°F 35°F 34°F 44°F 43°F 42°F 41°F 40°F 39°F 38°F 37°F.
Centigrade : 3°C 2°C 1°C 7°C 6°C 5°C 4°C 3°C.
The temperature control process for the Fridge works just like the Freezer process. Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin adjusting towards the newly set temperature. This will be reflected in the digital display.
DA68-02601D-00.indb 23 14. 11. 24. �� 11:08
• The temperature of the Freezer or Fridge may rise when you open the doors too frequently, or if a large amount of warm or hot food is placed inside.
• A rise in temperature may cause the digital display to blink. Once the Freezer and Fridge temperature return to their normal set temperatures, the blinking will stop.
• If the blinking continues, you may need to “reset” the Refrigerator. Try unplugging the appliance, wait for around 10 minutes and then plug the power cord back in.
• If there is a communication error between the Display and Main Controller, the Convertible Display light may blink. If the blinking continues for a long period of time, please contact a Samsung Electronics Service Center.
USING THE COLD WATER DISPENSER
Push the appropriate ice type button to select what you want dispensed.
Using the ice Dispenser
Place a glass underneath the ice dispenser and push gently against the dispenser lever with your glass. Make sure the glass is in line with the dispenser to prevent the ice from bouncing out.
• To select water, press the water button on the display, and then press the dispenser lever.
• To select Ice, press the ICE type button of your choice on the display, and then press the dispenser lever.
• If you have selected cubed ice, when you press the lever, the dispenser may dispense a small amount of crushed ice first.
• If ice doesn’t come out, pull out the ice bucket and press the test button located on the right side of ice maker.
Check the water level
Test button
NO ICE
Select this if you want
to turn ice maker off
• Do not press the test button continuously when the tray is filled with ice or water. Water may overflow or ice may jam the bucket.
• When you press the Test button, you will hear the refrigerator chime (ding-dong). When the chime sounds, release the Test button.
• The chime sounds automatically again to let you know the ice maker is working well.
• Replace the ice bucket.
English - 24
DA68-02601D-00.indb 24 14. 11. 24. �� 11:08
Ice Making
To fill the ice bucket to maximum capacity after installation, follow these steps:
1. Allow your refrigerator to operate and cool down for 24 hours (or 1 full day).
- Waiting 24 hours will allow your ice maker to cool properly.
2. Dispense 4 to 6 ice cubes into a glass.
3. After 8, and then 16 hours, dispense a full glass of ice.
CAUTION
• To clean the ice bin/bucket, wash with a mild detergent, rinse well, and then dry it thoroughly. Do not use harsh or abrasive cleaners or solvents.
• When you select Cubed Ice after using the Crushed Ice mode, a small amount of residual crushed ice might be produced.
If There is a Power Failure
If a power failure occurs, ice cubes may melt, and then freeze together when the power comes back on, preventing the dispenser from working properly. To prevent this problem, after a power failure, pull out the ice bucket and discard the residual ice or water. After you dump the ice from the ice bucket, you should press the dispenser lever once with the ‘Water’ or ‘Ice Type’ function ON. The ice maker will make new ice faster after you return the ice bucket to the refrigerator.
If you use all the ice at once, you must repeat Steps 2 and 3 under Ice Making. However, only wait 8 hours before dispensing the first 4 to 6 ice cubes. This will replenish the ice cubes and ensure maximum ice production.
Using the ice off Function
When you select the Ice Off mode, remove all ice cubes from the bucket. If you leave the ice cubes in the bucket, the ice cubes may clump together, making it difficult to remove them. To remove the ice bucket safely and avoid injury, hold the bottom of the bucket with one hand and the side of the bucket with the other. Then, lift up on the ice bucket, and pull it straight out. To put the ice bucket back in, push it firmly straight back.
If the ice bucket is not pushed firmly into place, ice in the bucket can melt.
If the bucket does not fit, turn the helix 90 degree (see the last illustration on the right, below) and try again.
CAUTION
• Use only the ice maker provided with the refrigerator. The water supply to this refrigerator must only be installed/connected by a suitably qualified person. Connect to a potable water supply only.
• To operate the ice maker properly, water pressure of 20 ~ 125 psi is required.
OPERATING
English - 25
DA68-02601D-00.indb 25 14. 11. 24. �� 11:08
Going on vacation...
If you are going on a long vacation or business trip and won’t use the water or ice dispensers for a long time:
• Close the water valve. Otherwise, water leakage may occur.
• Remove all food and ice in the ice bucket.
• Unplug the refrigerator.
• Wipe excess moisture from inside and leave the doors open. Otherwise, odor and mold may develop.
Ice Maker Do’s and Don’ts
• Do not put your fingers, hands or any other unsuitable objects in the chute or ice-maker bucket.
- It may result in personal injury or material damage.
• Never put your finger or any other objects in the dispenser opening.
- It may cause injury.
• Do not try to disassemble the ice maker.
• Do not wash or spray the ice bucket with water while it is in the refrigerator. Remove it to clean it.
Water clouding phenomenon
All water provided to the refrigerator flows through the core filter which is an alkaline water filter. In the filtering process, the pressure of the water that has flowed out of the filter is increased, and the water becomes saturated with oxygen and nitrogen. When this water flows out into the air, the pressure plummets and the oxygen and nitrogen get supersaturated, which results in gas bubbles. The water may temporarily look misty or cloudy due to these oxygen bubbles. After a few seconds, the water will look clear.
Please wait 1 second before removing the cup after dispensing water to prevent spills. Do not pull out the lever dispenser after dispensing ice or water. It comes back automatically. Ice is made in cubes. When you select “Crushed”, the ice maker grinds the ice cubes into crushed ice.
CAUTION
When you insert the Ice maker tray, be sure that the tray is well centered at the entrance. Otherwise, the tray may get stuck.
English - 26
DA68-02601D-00.indb 26 14. 11. 24. �� 11:08
PARTS AND FEATURES
Review the illustration below to become more familiar with the parts and features of your refrigerator.
Light
Door Closer
FF Ice-Maker
Foldable-Shelf
Fixed Shelf
Vertical Hinged
Section
Vegetable &
Fruit Drawers
Light
Slide Shelf
Quick-Space Glass Shelf (on some models)
Door Bins
Cool Select
PLUS
Pantry
Auto Pull Out Drawer
Freezer Drawer Bin
OPERATING
When closing the door, make sure the Vertical Hinged Section is in the correct position to avoid scratching the other door. If the Vertical Hinged Section is reversed, put it back to the right position and close the door. Moisture may appear at times on the Vertical Hinged Section. The door handle may become loose over time. If this happens, tighten the bolts found on the inside of the door. If you close one door with too much force, the other door may open.
When the door opens, the interlock switch automatically turns off the auger motor in the ice maker for safety reasons.
When the interior or exterior LED lamp has gone out, please contact Samsung Customer Support.
English - 27
DA68-02601D-00.indb 27 14. 11. 24. �� 11:08
USING THE COOL SELECT PANTRY™
The Cool Select Pantry™ is a full-width drawer with adjustable temperature control. This pantry can be used for large party trays, deli items, pizza, beverages, or miscellaneous items. There is a temperature control which can adjust the amount of cold air allowed into the pantry. The control is located on the right side of the pantry.
• The Pantry has three modes: The Fresh mode, Chilled mode, and Deli mode. Fresh mode is the default. Press the Temp button repeatedly until the mode you want is lit. Once you select a mode, the temperature will change to match the mode you selected.
• The Pantry temperature may change depending on the number of items inside and where they are located, the ambient temperature, and how often the door is opened.
The Pantry Selection Button
1. When you select “Deli”, the temperature of the pantry will be kept around 41°F (or 5°C). This feature helps keep food fresh for a long time.
2. When you select “Fresh”, the temperature of the pantry will be kept around 38°F (or 3°C). This feature helps keep food fresh for a longer time.
3. When you select “Chilled”, the temperature of the pantry will be kept around 34°F (or 1°C). This feature also helps keep meat or fish fresh for a longer time. The table below lists the Pantry modes and the kinds of foods that can be stored safely for each mode.
Deli Fresh Chilled
• Pineapple • cucumbers • steaks
• lemon • apples • hard cheeses
• avocado • oranges • cold cuts
• potato • grapes • bacon
• zucchinis • hot dogs
• corn
Fruits and vegetables may be damaged if you set the Pantry to the Chilled mode. Do not store lettuce or other leafy produce in this pantry.
CAUTION
Do not store glass bottles in the Cool Select Pantry. If they are freeze, they can break and cause personal injury.
English - 28
DA68-02601D-00.indb 28 14. 11. 24. �� 11:08
REMOVING THE REFRIGERATOR ACCESSORIES
1. Door Bins
• Door Bins (1)
- To remove : Simply lift the bin up and pull
straight out.
- To relocate : Slide it in above the desired
location and push down until it stops.
• Door Bins (2)
- To remove : Take the right side of the bin out
by lifting it at an angle along the guide, and then take the left side out by pulling it from the door.
- To relocate : Slide it into the original location
and push down until it sticks.
(1)
2. Tempered Glass shelves
- To remove : Tilt up the front of the shelf in the
direction shown (1) and lift it up vertically (2). Pull the shelf out.
- To relocate : Tilt the front of the shelf up and
guide the shelf hooks into the slots at a desired height. Then lower the front of the shelf so that the hooks can drop into the slots.
OPERATING
(1)
(2)
CAUTION
The Tempered Glass shelves are heavy. Use special care when removing them.
(2)
Injury may occur if the door bins are not firmly assembled. Do not allow children to play with the bins. Sharp corners of the bins may cause injury.
CAUTION
Do not adjust a bin full of food. Remove the food first. To remove dust from the bins : Remove the guard and wash the bin in water.
CAUTION
After sliding the foldable shelf in and folding it, the Shelf Front can be removed for your convenience. If you use the self without removing the Shelf Front, be aware the Shelf Front can separate from the shelf.
English - 29
DA68-02601D-00.indb 29 14. 11. 24. �� 11:08
3. Vegetable & Fruit Drawers
• Door Bins Before removing the drawer, please remove door bins first as below.
To remove
• Simply lift the bin up and pull straight out.
• Tilt up the front of the drawer and pull straight out, and pull out the drawer after moving slightly in the direction of the arrow.
4. Cool Select Pantry
- To remove the pantry : Pull the pantry out to
full extension. Tilt up the front side of the pantry and pull straight out.
- To relocate the pantry : Push the rails to the
back of the refrigerator. Place the drawer onto the rails and slide the pantry back until it is in place.
PLUS
Using the doors
Ensure that the doors close all the way and are securely sealed. When the refrigerator door is only partially open, it will automatically close. But, the door will stay open when opened more than the auto close range and you must close it manually.
To re-install
• Insert the drawer into the frame rails and push back into place.
• Slide bin in above the desired location and push down until it stops.
CAUTION
The drawers need to be removed before the glass shelf above them can be lifted out.
English - 30
DA68-02601D-00.indb 30 14. 11. 24. �� 11:09
Loading...
+ 90 hidden pages