Samsung rf263beaesr Dimension Guide

25 cu. ft. French Door

MODEL RF263BEAE DIMENSIONS

Be sure your new fridge will fit

Don't wait until delivery to be sure your new refrigerator will t – both
in your kitchen and through all doorways. This guide includes all pertinent
measurements and clearances so you can buy with condence.

WIDTH

(FITS 36" OPENING)

3

4

35

/

"

DEPTH

WITHOUT

DOOR

1

2

29

/

"

DEPTH

TO DOOR

HANDLE

3

4

35

/

"

HEIGHT

WITH

HINGE

70"

DEPTH

WITHOUT

HANDLE

4

33

1/

"

TOP OF RE FRIGERATOR W ITH DOORS O PEN 90°

DEPTH

WITH DOOR

OPEN

48"

TOP OF RE FRIGERATOR W ITH DOORS O PEN 140°

Standard-Depth Refrigerator

Standard-depth refrigerators typically measure 30 to 35 inches in depth,
as opposed to counter-depth refrigerators that sit ush with cabinetry.

Measure height

Measure height
including flooring.

including flooring.
Be sure to allow for

Be sure to allow for
hinge clearance

hinge clearance
height if needed.

height if needed.

Measure width

Measure width
including countertop

including countertop
overhang.

overhang.

Measure depth

Measure depth
including molding

including molding
or trim.

or trim.

140° 140°

63 3/4"

Installation clearances

3Allow 3.75" of clearance when installing along a wall.

This will allow for the door to open 90 degrees without
the handle contacting the wall.

3Allow 2" minimum clearance at rear for proper air

circulation and water/electrical connections.

3Allow a 3/8" minimum clearance at sides and top

for ease of installation.

For optimal usage and ability to open refrigerator doors
completely, do not install next to a wall.

Please note: The above dimension and cutout information is for planning
purposes only. For complete installation details, consult manual packed
with product, or download manual online at samsung.com.

Walk the delivery route

Walk the delivery route

3Identify the narrowest opening that the appliance will travel, from outside the home to the location where it will be installed.

3Identify the narrowest opening that the appliance will travel, from outside the home to the location where it will be installed.
3Appliance depth or width must be smaller than the width of the narrowest opening.

3Appliance depth or width must be smaller than the width of the narrowest opening.