Samsung RF263AERS-XAA User Manual [en, es]
Features of your new Refrigerator
KEY FEATURES OF YOUR NEW REFRIGERATOR
Your Samsung French Door Refrigerator comes equipped with various innovative storage and energy-efficient
features.
Twin Cooling S ystem
The Refrigerator and Freezer have separate evaporators. Due to this independent cooling system,
the Freezer and Refrigerator cool more efficiently.
Additionally, this separate air flow system prevents food odor of one compartment from seeping into
other compartments.
Cool S elect Pantry
The Cool Select PantryTM is a full-width drawer with adjustable temperature control.
TM
Bigger & Wider S pace
The wide shelf area and pantry provide enough space for larger items such as a pizza box, etc.
The wide freezer drawer also provides enough space for 2~3 turkeys.
S ecure Auto Close
The Secure Auto Close feature will automatically close a door that is slightly open.
Digital Display and Temperature Control
Water Filtration System
Door Alarm
A helpful beeper alerts you if the door is ajar.
Tilting Pocket
The Tilting pocket can be used to store up to a 16” pizza.
Auto Pull Out Drawer
The upper drawer in the freezer comes out automatically as you just open the freezer door.
Easy Handle
Fr ort.
2_ Features
Energy Star
Energy star labeled this product could save your energy costs.
For easy future reference, write the model and
serial number down. You will find your model
number and serial number on the left side of the
refrigerator.
Model #
Serial #
Safety Information
Before using your new Samsung French Door Refrigerator, please read this manual thoroughly
to ensure that you know how to safely and efficiently operate the features and functions that your
new appliance oers.
Because the following instruction covers various models, the characteristics of your Refrigerator
may dier slightly from the Refrigerator described in this manual. If you have any question, contact
us at 1-800-SAMSUNG or find help and information online at www.samsung.com.
What the icons and signs in this user manual mean :
WARNING
Hazards or unsafe practices that may result in severe personal injury or death .
CAUTION
Hazards or unsafe practices that may result in minor personal injury or property
damage.
CAUTION
To reduce the risk of fire, explosion, electric shock, or personal injury when using your
refrigerator, follow these basic safety precautions:
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions explicitly.
Unplug the power plug from the wall socket.
Make sure the machine is grounded to prevent electric shock.
Call the service center for help.
These warning signs are here to prevent injury to you and others.
Please follow them explicitly
Keep this manual in a safe place for future reference.
SEVERE WARNING SINGS
Do not plug several appliances into the same power receptacle.
t
Large appliances draw a lot of power. Powering more than one appliance or machine from a single power source
could cause overheating and cause a fire.
Make sure that the power plug is not kinked or damaged by the back of the Refrigerator.
t
Do not spray water directly into or on the outside of the Refrigerator/Freezer drawer.
tWater could get into the interior machine parts and cause electric shock.
Do not use aerosols near the Refrigerator.
Safety Information _3
SAFETY INFORMATION
Do not put undue stress on the power cord or place heavy articles on it.
t Placing heavy articles on the power cord create the risk of explosion or fire.
Do not insert the power plug with wet hands.
tIt may cause electric shock.
Do not put a container filled with water on the Refrigerator.
tIf it spills, it may cause fire or electric shock.
Do not install the Refrigerator in a damp place or place where it may come in contact
with water.
tW
et and/or deteriorated insulation of the internal electrical parts may cause electric shock or fire.
Do not store volatile, flammable or high evaporating substances in the refrigerator.
tStoring benzene, thinner, alcohol, ether, LP gas, dryice, and other such products may cause explosions.
Do not disassemble or repair the Refrigerator by yourself.
tYou run the risk of fire, appliance malfunctions and/or personal injury. Call your nearest service center for
help from a qualified service technician.
Unplug the Refrigerator before changing the interior light.
tChanging the light while the Refrigerator is plugged in may cause electric shock.
If you wish to dispose of the Refrigerator, remove the doors and seals before throwing
it away.
t The doors(and their seals) can entrap a child if they climb into the Refrigerator.
Make sure that the doors are o
, and ensure that no one is suocated by being locked inside.
The Refrigerator must be safely grounded
tAlways make sure that you have grounded the Refrigerator before attempting to investigate or repair any
part of the appliance. Power leakages can cause severe electric shock.
Never use gas pipes, telephone lines or other potential lightning attractors as an
electrical ground.
tImproper use of the grounding plug can result in a risk of electric shock. If it is necessary to use an
extension cord to power the Refrigerator, use only a 3-wire extension cord that has a 3-blade ground
plug and a 3-slot receptacle that will accept the plug on the appliance. The marked rating of the extention
cord should be AC 115V~120V, 10A, or more. Additionally, if a grounding adapter is used, make sure the
receptacle box is also fully grounded.
Safety Information
4_ Safety Information
CAUTION SIGNS
Use good judgment when filling the Refrigerator with food and drinks.
tIn an overfull Refrigerator, heavy, fragile, bulky or breakable items may fall out and cause personal injury
and/or damage to surrounding objects.
Do not put bottles or glass containers in the Freezer drawer.
tWhen the contents freeze and then expand, the glass may break and cause personal injury or leave
dangerous glass shar
ds in the Freezer.
If the electrical wall socket is loose, do not insert the power plug.
tThere is a risk of electric shock or fire. Have the plug looked at by a licensed electrician.
Never unplug your Refrigerator by pulling on the power cord.
tAlways grip the power cord firmly and pull straight out from the outlet. Yanking or pulling on the power
cord may cause a short-circuit, fire and/or electric shock.
tA damaged power cord must be replaced by the manufacturer, a certified service agent or qualified
service personnel.
Do not store articles on the top of the appliance.
tWhen you open or close the door
, the articles may fall and cause personal injury and /or damage to
surrounding objects.
Do not store pharmaceutical products, scientific materials and temperature-sensitive
products in the refrigerator.
tProducts that require exact temperature controls should not be stored in the Refrigerator.
Do not allow children to climb, stand or hang on shelves and handles of the
Refrigerator. They could damage the Refrigerator and seriously injur
e themselves.
If you notice chemical or burning plastic smells or see smoke, unplug the Refrigerator
immediately and contact your Samsung Electronics Service Center.
After your Refrigerator is in operation, do not touch the cold surfaces in the Freezer
compartment. Particularly when hands are damp or wet, skin may adhere to these
extremely cold surfaces.
tSkin may stick to the surface and you may get frostbite.
Do not put your hands under the appliance.
tAny sharp edges may cause personal injury.
Never put fingers or other objects into the water dispenser hole or ice chute.
tIt may cause personal injury and/or material damage.
Safety Information _5
CAUTION
Safety Information
If the Refrigerator will not be used for a long period of time (for example, over several
months), unplug the power from the wall.
Over time, deterioration in the power cord insulation may cause fire.
Do not use a wet or damp cloth when cleaning the plug.
Remove any dust or foreign matter from the power plug pins.
A Dirty power plug can increase the risk of fir
If the Refrigerator is disconnected from the power supply, you should wait for at least
five minutes before plugging it back in.
Do not place the equipment directly in sunlight.
The appliance must be positioned so that the power cord is accessible after
installation.
If the power cord is damaged, it must be replaced by the manufacturer, a certified
service agent or qualified service personnel.
Wipe excess moisture from the inside and leave the doors open to keep odor and mold from developing.
e.
S ervice Warranty and Modification
Any changes or modifications performed by a 3rd party on this finished appliance is not covered under
Samsung warranty service, nor can Samsung be responsible for safety issues that result from 3rd party
modifications.
Children can get trapped inside Refrigerators.
CAUTION
Before you throw away your old Refrigerator or Freezer, make sure that you;
Leave all shelves in places so that children may not easily climb inside and shut the door while they are
inside.
Children should be supervised to ensure that they do not play with the appliance.
CAUTION
Be careful when you open the doors when children are in the area.
Do not block air holes
If the air holes are blocked, especially with plastic bag, refrigerator can be over cooled.
If this cooling period lasts long, water filter will be broken and cause water leakage.
6_ Safety Information
Contents
30 Normal Operate Sound.
09 Components for handle assembly
09 How to assemble the handle
SETTING UP YOUR FRENCH
DOOR REFRIGERATOR
08
OPERATING YOUR SAMSUNG
FRENCH DOOR REFRIGERATOR
20
08 Getting ready to install the refrigerator
09 Setting up the refrigerator
10 Removing the refrigerator doors
12 Reattaching the refrigerator doors
14 Adjusting the doors
15 Making minor adjustments between doors
16 Adjusting the freezer drawer
17 Checking the water dispenser line
18 Installing the water line
20 Using the control panel
21 Using the digital display
22 Controlling the temperature
22 Using the cold water dispenser
23 Parts and Features
24 Storing food
25 Using the Cool Select Pantry™
26 Removing the refrigerator accessories
27 Using the doors
28 Removing the freezer drawer accessories
29 Cleaning the refrigerator
30 Changing the interior lights
TROUBLESHOOTING
36
WARRANTY
37
WIR ING DIAG RAM
39
31 Changing the water filter
36 Troubleshooting
37 Warranty
39 Wiring diagram
Contents _7
Setting up your French Door Refrigerator
GETTING READY TO INSTALL THE REFRIGERATOR
Congratulations on your purchase of the Samsung French Door Refrigerator. We hope you enjoy the state-of-art
Selecting the best location for the Refrigerator
2 inch
location with easy access to the water supply.
location without direct exposure to sunlight.
location with level (or nearly level) flooring.
location with enough space for the Refrigerator doors to open easily.
rculation of the internal cooling system.
2 inch
If the Refrigerator does not have enough space, the internal cooling system
may not work properly.
If your refrigerator has an ice maker, allow extra space at the back for the water line connections.
When you install the refrigerator next to a fixed wall, minimum clearance is 3 ¾” (95mm) between the refrigerator and wall to
allow the door to swing open.
First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways
(both width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of Samsung French Door Refrigerator.
B
B
A
A
Model
RF266
RF263
Depth
“A”
1
8
/
29- ”
(83.6cm)
Width
“B”
35-¾”
(90.8cm)
Height
“C”
69”
(175.2cm)
Overall
Height “D”
69-¾”
(177.4cm)
Depth
“E”
5
8
/
35- ”
(90.5cm)
E
E
C
C
reduce power consumption
and keep your energy bills lower.
Do not install the Refrigerator where the temperature will go below 50 ºF (10 ºC).
Condensation may occur on the french door areas when you use Refrigerator for the first time.
The E.Saver function is automatically set to on when power is supplied to the Refrigerator.
D
D
When moving your refrigerator
To prevent floor damage be sure the front levelling legs are
in the up position (above the floor). Refer to ‘Levelling the
refrigerator’ in the manual.
To protect the finish of the flooring, place the protection
sheet such as packing carton under the refrigerator.
When installing, servicing or cleaning behind the refrigerator,
CAUTION
be sure to pull the unit straight out and push back in straight
after finishing.
8_ Setting Up
Control Lever
S crewdriver
SETTING UP THE REFRIGERATOR
Now that you have your new Refrigerator installed and in place, you are ready to set up and enjoy the features and
functions of the appliance.
By completing the following steps, your Refrigerator should be fully operational.
1. Place the Refrigerator in an appropriate location
with reasonable clearance between the wall and
the Refrigerator. Refer to installation instructions in
this manual.
2. Once the Refrigerator is plugged in, make sure the
interior light comes on when you open the doors.
3. Set the Temperature control to the coldest
temperature and wait for an hour. The Freezer will
get slightly chilled and the motor will run smoothly.
4. After powering the Refrigerator, it will take a few
hours to reach the appropriate temperature. You
can store food and drinks in the Refrigerator once
the temperature is sufficiently cool.
Check the accessory list below.
COMPONENTS FOR HANDLE ASSEMBLY
[ 3-DOOR TYPE ]
Water filter
(DA29-00003B)
Fridge
Wrench : 3/32 inch
Hex wrench
(DA80-00002C)
(DA60-00143B)
Label Handle Instruction
Fastener
Compression
fitting
(DA62-00305A)
Washer
(DA80-00002C)
Compression
nut
(DA74-00070B)
01
SETTING UP
HOW TO ASSEMBLE THE HANDLE
Fridge door handle assembly
OKOK
To best conceal the connection
points : Assemble the handles
with the mounting screws facing
each other.
Freezer
the screw and then put the handle
(Optional)
By using L-wrench, Fix the screw with the Longer part of it and
then fully tighten up with the Shorter part.
Setting Up _9
Setting up your French Door Refrigerator
HOW TO ASSEMBLE THE HANDLES (CONT’D)
OKOK
Freezer / Flex zone door handle assembly
Please do not remove the Freezer / Flex Zone drawer. Handle can be attached without removing the door.
CAUTION
To best conceal the connection
points : Assemble the handles
with the mounting screws facing
down.
REMOVING THE REFRIGERATOR
If your entrance won’t allow the Refrigerator to pass easily
through it, you can remove the doors.
Disassemble the Refrigerator doors
1. With the door closed, remove the top table(
using a Philips screwdriver, and then disconnect the
wires(
screw(
). Remove hinge screws(3) and ground
2
)
4
)
1
By using L-wrench, Fix the screw with the Longer part of it and
then fully tighten up with the Shorter part.
*
Tilt up the Handle bar and turn the wrench.
Tools you will need
Philips screwdriver 10mm Socket Wrench
Flat-blade screwdriver Pliers
3
4
Put the handle on the xer
Allen wrench(3/16”)
1
2
2. Lift the door straight up to remove.
3. With a Philips head screwdriver, remove the two
screws(
) attached to the lower left and right
10
door hinges.
With an Allen Wrench(3/16”), remove the two hex
head bolts(
) attached to the lower left and right
11
door hinges.
Remove the lower left and right door hinges(
10_Setting Up
12
12
10
11
).
Disassemble the Freezer drawer
1. Push the upper drawer until it reaches to the cabinet rear wall.
2. Remove the tilting pocket(
1
) by pulling strongly on both brackets(
2
)
upward at the same time.
3. Take out the lower basket(
3
) by lifting the basket up from
rail system.
1
2
3
4. Remove four 10mm hex-head bolts from both sides.
5. Lift the freezer door up from the rails.
Setting Up_11
01 SETTING UP
12_Setting Up
12
12
10
11
REATTACHING THE REFRIGERATOR DOORS
Assemble the Refrigerator doors
1. rcsdaehtaflowthcattaeR ews(
1
) and two hex head
screws(
2
) to the hinge completely.
2. Place the hole in the bottom of the door(
3
)over the lower
hinge (
4
)
Be aware not to miss the hinge cap because it can
.
3. Insert the upper hinge shaft(
5
) into the hole on the
corner of the Refrigerator door(
6
). Make sure the hinge
is level between the upper hinge hole(
7
) and the hole of
the cabinet(
8
) and reattach the hinge screws(9) and
ground screw(
10
) by turning in a clockwise direction.
Reconnect the wires.
4. Place the front edge of the top table(
11
) on the front of the
upper hinge(
12
) and reattach with three screws.
When reattaching the top table, make sure that the
wires are not pressed or damaged by the top table.
5
6
7
8
9
10
12
11
Setting up your French Door Refrigerator
7
8
6
4. With the drawer pulled out fully, insert the lower basket (
6
) into
the rail system.
5. Hook the ends of the tilting pocket (
7
) into both brackets (8),
and push down until they lock into place.
1. Pull out the rails to the full length on each side of the cabinet evenly.
ASSEMBLE THE FREEZER DRAWER
2. Hang the freezer door front onto open slots on the sides.
3. Tighten four 10mm hex-head screws completely.
Slot
Slot
CAUTION
Make sure the door is well assembled on the rail
CAUTION
If the drawer is not properly assembled on the rail, the door
will not close and it will cause frost.
Setting Up_13
01 SETTING UP
14_Setting Up
Control Lever
Screwdriver
S crewdriver
Control Lever
ADJUSTING THE DOORS
Now that the doors are back on the Refrigerator, you want to make sure the Refrigerator is level so you can
make final adjustments. If the Refrigerator is not level, it will not be possible to get the doors perfectly even.
When the Left door is lower than the Right door.
Insert a flat-blade screwdriver into a notch on the left control lever, turn it clockwise or counter-clockwise
to level the left door.
When the Left door is higher than the Right door.
Insert a flat-blade screwdriver into a notch on the right control lever, turn it clockwise or counter-clockwise
to level the right door.
We do not recommend making small adjustments with the control lever. Instead, refer to the next page for the
best way to make minor adjustments to the doors.
Setting up your French Door Refrigerator
MAKING MINOR ADJUSTMENTS BETWEEN DOORS
Remember a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review the
previous section on leveling the Refrigerator.
When the left
door is lower
than the right
door.
When the left
door is higher
than the right
door.
Adjustment
part
Adjustment
part
3
1
3
4
2
1. If you open the drawer (
1
), you can see the lower hinge (2).
2. Insert the supplied Allen Wrench(3/16”) (
3
) into the shaft (4) of the lower hinge.
3. Please adjust the height by turning the Allen Wrench(5mm) (
3
) clockwise(
) or
counter-clockwise( ).
when you turn the Allen Wrench(5mm) counter-clockwise( ), the door will move up.
1. After adjusting the doors, please insert the supplied fastener-ring (
5
) using a pair of pliers (6) in the
gap between the hinge-grommet (
7
) and the lower hinge(8). The number of fastener-rings you’ll need
to insert depends on the gap.
Two fastener-rings are enclosed with the refrigerator.
Thickness of each fastener-ring is 0.04 inch.
Setting Up_15
01 SETTING UP
16_Setting Up
ADJUSTING THE FREEZER DRAWER LEVEL
1. Locate the height-adjuster (
3
) with a Phillips
screwdriver.
3. Find the best level to align the door slope.
After adjustment, first tighten screw (
3
) and then screw (2).
Freezer Drawer
Adjustment part
1
2
3
Example) The slope is about 2mm (0.08inch) as shown below.
- Rotate the Height Adjuster to +2.0 to reduce the door
slope.
Slope
Reference
plane
Setting up your French Door Refrigerator
) in the freezer drawer.
1
Unscrew the four Phillips screws (
) slightly to loosen the door.
2
2. Loosen the controller screw(
Setting Up_17
01 SETTING UP
Setting up your French Door Refrigerator
INSTALLING THE WATER LINE
Connecting the water line to the Refrigerator.
There are several items that you need to purchase to complete this connection. You
may find these items sold as a kit at your local hardware store.
1/4” compression nut
plastic tubing
1. Tighten the compression nut onto the 1/4” compression fitting.
- If you are using copper tubing, slip the compression nut Ⓑ (not included) and ferrule (not included) on
copper tubing (not included) as shown.
- If you are using plastic tubing Ⓑ, insert the molded end(Bulb) of the plastic tubing Ⓑ into the
compression fitting.
Do not use without the molded end(Bulb) of the plastic tubing Ⓑ.
CAUTION
2. Tighten the compression nut Ⓑ on to the compression fitting. Do not over-tighten the compression nut Ⓑ.
3. Turn water on and check for any leakage.
Only connect the water line to a drinkable water source.
If you have to r
leak-free connection.
copper tubing
ferrule
Assembled)
Assembled)
Ⓑ
1/4“ of the plastic tubing to make sure you get a snug,
Installing the water filter.
1. Remove the water filter cover(
2. Remove the fixed cap by turning it counter clockwise.
Keep the cap in a safe place for later use if you don’t
use the filter.
3. Remove the water filter from the box and put a
replacement indicator sticker on the filter as shown.
Place a sticker on the filter that dates six months in
the future. For example, if you install the water filter in
March, put the “SEP” sticker on the filter to remind you
to replace in September. That way you’ll know when
it is time to replace the filter. Normally, a filter life is
about 6 months.
18_Setting Up
)
1
1
2 3
Sticker
(month indicator)
01 SETTING UP
Setting Up_19
Operating your SAMSUNG French
Door Refrigerator
USING THE CONTROL PANEL
1 2 3 4 5 6
1
(
2
(
Button
) Power Freeze Button
Press the I button if you want to tur .
Speeds up the time needed to freeze products in the Freezer. It can be helpful if you need to quickly
freeze easily spoiled items or if the temperature in the Freezer has warmed dramatically (for example, if
the door was left open).
3
(
) Freezer Button
4
(
) Fridge Button
5
(
) Power Cool Button
6
(
) E. Saver Button
20_Operating
Press the Freezer button to set the Freezer to your desired temperature. You can set the temperature
between 8°F and -14°F.
Press the Fridge button to set the fridge to your desired temperature.
You can set temperature between 34°F and 46°F.
Speeds up the time needed to cool products in the Refrigerator. It can be helpful if you need to quickly
cool easily spoiled items or if the temperature in the fridge has warmed dramatically (For example, if the
door was left open).
For better energy efficiency, press E. S aver button. However, if condensation occurs on the door, turn
.
USING THE DIGITAL DISPLAY
Power Freeze
This icon will light up when you activate the “Power Freeze” feature. “Power Freeze” is great when you
need a lot of ice.
When you have enough ice, just press the button again to cancel the “Power Freeze” mode.
If you select “Power Freeze”, the inside temperature of the Freezer will decrease for about two and a half
hours.
I
If you don’t need ice, press the “I ” button to save on water and energy consumption.
Power Cool
This icon will light up when you activate the “Power Cool” button. For a quick fridge cool down, use
“Power Cool” .
02 OPERATING
If you select “Power Cool”, the inside temperature of the Fridge will decrease for about two and a half
hours.
Filter Indicator
When the filter indicator light is on, it is time to change the filter. Typically this happens about
every 6 months.
The filter Indicator will be Blue when you initially insert the water filter.
The filter Indicator will be Light Pink when you have used your water filter for 5 months.
The filter Indicator will be Red when you have used your water filter for 6 months.
After removing the old water filter and installing a new one (see page 30 for instructions on how to do
this), reset the indicator by pressing the “Fridge” and “Power Cool” button simultaneously for about 3
seconds.
Cooling O Mode (“ OF & OF” code on the display)
This function is for store display refrigerators. It is not for customer use.
Mode, the refrigerator works but doesn’t make cool air. To cancel this mode,
C AUTION
press the Power Freeze and Freezer buttons at the same time for 3 seconds until a “Ding-dong”
sound is heard and the unit will now cool.
Operating_21
22_Operating
USING THE COLD WATER DISPENSER
CONTOLLING THE TEMPERATURE
Controlling the Freezer temperature
The Freezer temperature can be set between 8°F and -14°F to suit your particular needs. Press the
Freezer button repeatedly until the desired temperature is shown in the temperature display. Keep in
mind that foods like ice cream may melt at 4°F.
The temperature display will move sequentially from -14°F to 8°F. When the display reaches 8°F, it will
begin again at -14°F.
Controlling the Refrigerator temperature
The Refrigerator temperature can be set between 46°F and 34°F to suit your particular needs. Press
the Fridge button repeatedly until the desired temperature is shown in the temperature display.
The temperature control process for the Fridge works just like the Freezer process.
Press the Fridge button to set your desired temperature. After a few seconds, the Fridge will begin
adjusting towards the newly set temperature. This will be reflected in the digital display.
Using the Water dispenser (RF266)
Place a glass underneath the water outlet and push gently against the
water dispenser lever with your glass. Make sure the glass is in line with the
dispenser to prevent the water from splashing out.
If you have just installed the Refrigerator or just installed a new water filter,
pour out the first six glassfuls of water to flush out impurities in the water
supply system. Make sure water flows cleanly before drinking.
The temperature of the Freezer or the Refrigerator may rise from opening the doors too frequently, or if a
large amount of warm or hot food is placed in either side.
This may cause the digital display to blink. Once the Freezer and Refrigerator temperature return to their
normal set temperatures, the blinking will stop.
If the blinking continues, you may need to “reset” the Refrigerator. Try unplugging the appliance, wait for
around 10 minutes and then plug the power cord back in.
If you have a long vacation or business trip, close the water
the water supply to the Refrigerator. This will help prevent accidental leakages.
When you do not use the water dispenser for 2~3 days (especially during the
summer), the dispensed water may have a funny smell or taste. If this occurs, we
recommend that you discard the first 1~2 glasses for better tasting water.
Please wait 1 second before removing the cup after dispensing water to prevent spills.
C AUTION
C AUTION
PUSH
One Touch Pure Water
Water clouding phenomenon
All water provided to refrigerators flows through the core filter which is an alkaline water filter. In this process,
the pressure in the water that has flowed out of the filter gets increased, and oxygen and nitrogen become
saturated. When this water flows out in the air, the pressure plummets and the oxygen and nitrogen get
supersaturated so that they turn into gas bubbles. The water could look misty due to these oxygen bubbles.
The water may look temporarily cloudy due to these oxygen bubbles. After a few seconds, the water will
look clear.
Operating your SAMSUNG French
Door Refrigerator
Operating_23
Operating your SAMSUNG French Door
Refrigerator wherever it appears
PARTS AND FEATURES
Spill Proof
3
Glass Shelf
Vertical Hinged
Section
Internal Water
Dispenser
4
(RF266AB)
Vegetable & Fruit
Drawers
Use this page to become more familiar with the parts and features of the Refrigerator.
LED Light
Digital Sensor
Control
Auto Door Closer
Dairy
Compartment
Water Filter
Door Bins
Cool Select
TM
Pantry
1
2
5
02 OPERATING
LED Light
Ice maker
Tilting Pocket
7
Ice Bin
Front Leg Cover
Auto Pull Out Drawer
Freezer Drawer Bin
LED Light
6
8
24_Operating
If you plan to go away for a long time, empty the Refrigerator and tur . Wipe the excess moisture from
the inside of the appliance and leave the doors open. This helps keep odor and mold from developing.
STORING FOOD IN THE FREEZER DRAWER
Can be used to store meat and dry foods.
Stored food should be placed in a container or wrapped securely
using foil or other suitable wrapping materials.
Best use to store meats or dry foods. Stored food should be placed in
a container or wrapped securely using foil or other suitable wrapping
materials.
(
6
) TUOLLUPOTUA
DRAWER
Can be used for small packages of frozen food.
You can store a 16” pizza.
(
7
) LIT TING POCKET
(
8
) ARDREZEERF WER
BIN
Bottles should be stored tightly together so that they do not tip and fall out when the Refrigerator door is opened.
Do not place any large articles of food under the lamp in the Refrigerator. An air sensor is located near the
lamp and if the sensor is blocked, your Refrigerator may become too cold. Please place Vegetable and
Fruits in the Vegetable and Fruits drawers to avoid freezing them, if the foods in your Refrigerator become
frozen, please set the temperature higher.
STORING FOOD IN THE REFRIGERATOR
Can be used to store small dairy items like butter or margarine, yogurt or
cream cheese bricks
(
1
) DAIRY
COMPARTMENT
Designed to handle large, bulky items such as gallons of milk or other large
bottles and containers.
(
2
) DOOR BINS
Designed to be crack-resistant, the shelves can be used to store all types of food
and drinks. Circular marks on the glass surface are a normal phenomenon
and can usually be wiped clean with a damp cloth.
(
3
) SSALGDEREPMET
SHELVES
Used to preserve the freshness of your stored vegetables and fruits.
This drawer has been specifically designed to control the level of humidity
within the compartment. Keep vegetables and fruits separate if possible.
(
4
) VEGETABLE & FRUIT
DRAWERS
Can be used for large party trays, deli items, pizza, beverages or
miscellaneous items.
(
5
) TCELESLOOC
PANTRY™
Operating your SAMSUNG French
Door Refrigerator
Loading...