Samsung RF217ABWP/XAA-00, RF217ABRS/XAA-00, RF217ABPN/XAA-00, RF217ABBP/XAA-00, RF197ABWP/XAA-00 Owner’s Manual

...

Free Standing Appliance

_ the possibilities

Thank you for purchasing this Samsung product. To receive more complete service,

please register your product at

www. samsu ng,com/reg ister

F atur of y©ur F ofrou r

KEY FEATURES OF YOUR NEW REFRIGERATOR

Your Samsung Refrigerator comes equipped with various innovative storage and energy-efficient features.

Twin Cooling System

The Refrigerator and Freezer have separate evaporators. Due to this independent cooling system, the Freezer and Refrigerator cool more efficiently.

Additionally, this separate air flow system prevents food odor of one compartment from seeping into

other compartments.

Bigger & Wider Space

The wide shelf area provides enough space for larger items. The wide freezer drawer also provides enough space for 2-3 turkeys.

Secure Auto Close

The Secure Auto Close feature will automatically close a door that is slightly open.

Digital Display and Temperature Control

The easy-to-read Digital Display enhances the look of your kitchen and allows you precise temperature control.

Door Alarm

A helpful beeper alerts you if a door is ajar.

Easy Handle

Freezer door can be opened with less effort.

Energy Star

This Energy star labeled product may save you money on your energy costs.

For easy future reference, write the model and serial number down. You will find

your model number and serial number on the left side of the refrigerator.

Model #

Serial #

2 Fea ures

SAFETY INFORMATION

Before operating the appliance, please read this manual thoroughly and retain it for your reference. Use this appliance only for its intended purpose as described in this instruction manual.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a person responsible for their safety. This appliance is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Because the following instruction covers various models, the characteristics of your Refrigerator may

differ slightly from the Refrigerator described in this manual. If you have any question, contact us at

1-800-SAMSUNG or find help and information online at www.samsung.com.

Important

WARNING

CAUTION

These warning signs are here to prevent injury to you and others.

Please follow them carefully.

After reading this section, keep it in a safe place for future reference.

safety symbols and precautions:

Hazards or unsafe practices that may result in severe personal injury or death.

Hazards or unsafe practices that may result in minor personal injury or property damage.

Do NOT attempt. Do NOT disassemble. Do NOT touch. Follow directions carefully.

Unplug the power plug from the wall socket. Make sure the machine is grounded to prevent electric shock. Call the contact center for help. Note.

WARNINGSEVEREWARNING SIGNS FOR INSTALLATION

• Do not install the refrigerator in a damp place or place where it may come in contact with

water.

- Deteriorated insulation of electrical parts may cause an electric shock or fire.

• Do not place this refrigerator in direct sunlight or expose to the heat from stoves, room heaters or other appliance.

Safety I-ffomr_aon 3

• Do not plug several appliances into the same multiple power board. The refrigerator should always be plugged into its own individual electrical which has a voltage rating that matched the rating plate.

- This provides the best performance and also prevents overloading house wiring circuits, which

could cause a fire hazard from overheated wires.

• If the wall socket is loose, do not insert the power plug.

- There is a risk of electric shock of fire.

• Do not use a cord that shows cracks or abrasion damage along its length or at either end.

• Do not bend the power cord excessively or place heavy articles on it.

• Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

- Damage to the cord may cause a short-circuit, fire and/or electric shock.

• Do not use aerosols near the Refrigerator.

- Aerosols used near the Refrigerator may cause an explosion or fire.

This refrigerator must be properly installed and located in accordance with the manual before it is used.

Connect the power plug in proper position with the cord hanging down.

- If you connect the power plug upside down, the wire can get cut off and cause a fire or electric

shock.

When moving the refrigerator, be careful not to roll over or damage the power cord.

- This constitutes a fire hazard. Make sure that the power plug is not squashed or damaged by the back of the

refrigerator. Keep the packing materials out of reach of children.

- There is a risk of death from suffocation if children put them on their head. The appliance must be positioned so that the plug is accessible after installation.

The Refrigerator must be safely grounded

- Always make sure that you have grounded the Refrigerator before attempting to investigate or

Never use gas pipes, telephone lines or other potential lightning attractors as an electrical ground.

WARNING

- Improper use of the grounding plug can result in a risk of electric shock.

If the power cord is damaged, have it replaced immediately by the manufacturer or its service agent.

4 Safety Iqformaton

repair any part of the appliance. Power leakages can cause severe electric shock.

If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-blade grounding plug and a 3-slot receptacle that will accept the plug on the appliance. The marked

rating of the extension cord should be AC115-120 V, 10 A, or more. If a grounding adapter is used, make sure the receptacle box is fully ground

CAUTIO.CAUTION SIGNS FOR INSTALLATION

• Allow sufficient space to install the refrigerator on a flat surface.

- If your refrigerator is not level, the internal cooling system may not work correctly.

• Keep ventilation opening in the appliance enclosure or mounting structure clear of

obstruction.

,, Allow the appliance to stand for 2 hours after installation.

WAR.I.GSEVEREWARNING SIGNS FOR USING

• Do not insert the power plug with wet hands.

• Do not store articles on the top of the appliance.

- When you open or close the door, the articles may fall and cause personal injury and/or material damage.

• Do not put a container filled with water on the refrigerator.

- If spilled, there is a risk of fire or electric shock.

• Children should be supervised to ensure that they do not play with the appliance.

• Do not let children hang on the door. A serious injury may occur.

• Do not let children enter inside of the refrigerator. There is a risk of children entrapment.

• Do not insert your hands into the bottom area under the appliance.

- Any sharp edges may cause personal injury.

• Do not let children step on drawer's cover.

- The drawer may break and cause them to slip.

• Do not overfill the refrigerator with food.

- When you open the door, an item may fall out and cause personal injury or material damage.

• Do not touch the inside walls of the freezer or products stored in the freezer with wet hands.

- This may cause frostbite.

,, Do not spray inflammable gas near the refrigerator.

- There is a risk of explosion or fire.

• Do not store volatile or flammable substances in the refrigerator.

- The storage of benzene, thinner, alcohol, ether, LP gas and other such products may cause

explosions.

• Do not store pharmaceuticals products, scientific materials or temperature sensitive products in the refrigerator.

- Products that require strict temperature controls must not be stored in the refrigerator.

• Do not place or use an electrical appliance inside the refrigerator, unless it is of a type recommended by the manufacturer.

• Do not use mechanical devices or any other means to accelerate the defrosting process, other than those recommended by the manufacturer.

• Do not damage the refrigerant circuit.

,, Do not disassemble or repair the refrigerator by yourself.

- You run risk of causing a fire, malfunction and/or personal injury.

Safety Information r5

WARNINGSEVERE WARNING SIGNS FOR USING

• Children should be supervised to ensure that they do not play with the appliance.

• Bottles should be stored tightly together so that they do not fall out.

• This product is intended only for the storage of food in a domestic environment.

• if a gas leak is detected, avoid any naked flames or potential sources of ignition and air the room in which the appliance is standing for several minutes.

,,Pull the power plug out of the socket before changing the interior lamps of the

refrigerator.

- Otherwise, there is a risk of electric shock.

,, If the appliance generates a strange noise, a burning smell or smoke, unplug the power

plug immediately and contact your nearest service center.

,, If you experience difficulty when changing the light, contact service agents. ,, If any dust or water is in Refrigerator, pull out power plug and contact your Samsung

Electronics service center.

- Otherwise there is a risk of fire

CAUTIONCAUTION SIGNS FOR USING

Do not re-freeze frozen foods that have thawed completely.

Do not place carbonated or fizzy drinks in the freezer compartment. Do not put bottles or glass containers in the freezer.

- When the contents freeze, the glass may break and cause personal injury.

,, Service warranty and Modification.

- Any changes or modifications performed by a 3rd party on this finished appliance is not covered under Samsung warranty service, nor can Samsung be responsible for safety issues

that result from 3rd party modifications.

,, Do not block air holes.

- If the air holes are blocked, especially with a plastic bag, the refrigerator can be over cooled. If

this cooling period lasts too long, the water filter may break and cause water leakage.

• If the refrigerator is disconnected from the power supply, you should wait for at least five minutes before plugging it back.

,, If you have a long vacation planned or the refrigerator is not to be used for a long period

of time, you must empty the refrigerator and pull out the power plug.

- Deterioration in the insulation may cause fire.

,, Wipe excess moisture from the inside and leave the doors open.

- Otherwise, door and mold may develop.

,, To get Best performance of product,

- Do not place foods too closely in front of the vents at the rear of the appliance as it can

obstruct free air circulation in the refrigerator compartment.

- Wrap the food up properly or place it in airtight containers before putting it into the refrigerator.

,, Fill water tank, ice tray, water cubes only with potable water.

6 safety iqfomqa on

cAu'no.CAUTION SIGNS FOR USING

• When the product is flooded, make sure to contact your nearest service center.

- There is a risk of electric shock or fire.

• Do not directly spray water inside or outside the

- There is a risk of fire or electric shock.

,, Remove any foreign matter or dust from the power plug pins. Do not use a wet or damp

cloth when cleaning the plug, remove any foreign material or dust from the power plug pins.

- Otherwise there is a risk of fire or electric shock.

• Unplug the refrigerator before cleaning and making repairs.

WAR.I.GSEVEREWARNING SIGNS FOR DISPOSAL

DANGER : Risk of child entrapment. Before you throw away your old refrigerator or freezer:

- Take off the doors.

- Leave the shelves in place so that children may not easily climb inside.

• Please dispose of the packaging material for this product in an environmentally friendly

manner.

,, Leave the shelves in place so that children may not easily climb inside. Ensure that none

of the pipes on the back of the appliance are damaged prior to disposal.

,, When disposing of this refrigerator, remove the door/door seals and door latch so that

small children or animals cannot become trapped inside. Children should be supervised to ensure that they do not play with the appliance.

,, Cyclopentane is used as in the insulation. The gases in the insulation material require

a special disposal procedure. Please contact your local authorities in regard to the environmentally safe disposal of this product. Ensure that none of the pipes on the back of the refrigerator are damaged prior to disposal.

refrigerator.

safetyiqfomqaon 7

nt nts

SETTING UP YOUR

FRENCH DOOR REFRIGERATOR

OPERATING YOUR

SAMSUNG REFRIGERATOR

09 Getting ready to install the refrigerator

10 Setting up the refrigerator 10 Removing the refrigerator doors

15 Adjusting the doors 16 Making minor adjustments between doors

17 Installation of the water line

19 Parts and features

20 Using the control panel 21 Controlling the temperature

24 Storing food in the refrigerator 24 Storing food in the freezer drawer

25 Food storage tips 27 Removing the fridge accessories

28 Removing the freezer accessories 29 Cleaning the refrigerator 30 Changing the interior lights

TROUBLESHOOTING 31 Troubleshooting

WARRANTY 32 Warranty

8_ contents

urFrenchDoorF efrger or

GETTING READY TO INSTALL THE REFRIGERATOR

Congratulations on your purchase of this Samsung French Door Refrigerator. We hope you enjoy the state-of-art

features and efficiencies that this new appliance offers.

Selecting the best location for the Refrigerator

• A location with easy access to the water supply.

• A location without direct exposure to sunlight.

• A location with level (or nearly level)flooring.

• A location with enough space for the Refrigerator doors to open easily.

• Allow sufficient space for air circulation of the internal cooling system. If the Refrigerator does not have enough space, the internal cooling system may not

work properly.

First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways (both width and height), thresholds, ceilings, stairways, etc.

The following chart details the exact height and depth of Samsung French Door Refrigerator.

2 i ncl

Model RF217AB

Capacity (cu.ft)

Width (A)

Dimension

(inch)

,, Allow clearance to the right, left, back and top when installing. This will help reduce power consumption ,, If you install the Refrigerator where is below 50°F (10°C), it may not function optimally.

,, Do not locate the refrigerator where the wet condition.

CAUT=ONTO prevent floor damage, be sure the front adjusting legs

FLOORI NG

Depth

Height

and keep your energy bills lower.

When moving your refrigerator are in the up position(above the floor).

Refer to 'Adjusting the doors' (on page 15).

without door (B)

with door (C)

without hinge (D)

with hinge (E)

RF195AB RF197AB

17.8 32 1/4" 24 3/8"

30 1/2" 68 5/8" 69 3/4"

19.7 32 1/4" 26 1/4"

32 1/2" 68 5/8" 69 3/4"

Flat-blade Control Lever

screwdriver(-)

For proper installation, this refrigerator must be placed on a level surface of hard material that is the same height as the rest of the flooring. This surface should be strong enough to support a fully loaded refrigerator, or approximately 2231bs(106kg). To protect

the finish of the flooring, cut a large section of the cardboard carton and place under the refrigerator where you are working. When moving the refrigerator, be sure to pull it straight out and return it to position by pushing it straight in.

settng up 9

S tt upyourFron DoorRefr erator

SETTING UP THE REFRIGERATOR

Now that you have your new Refrigerator installed in place, you are ready to set up and enjoy the features and functions of the appliance. By completing the following steps, your Refrigerator should be fully operational.

1. Place the Refrigerator in an appropriate location with reasonable clearance between it and the wall. Refer to installation instructions in this manual. (page 9, selecting the best location for the Refrigerator)

2. Once the Refrigerator is plugged in, make sure the interior light comes on when you open the doors.

3. Set the Temperature control to the coldest temperature and wait for an hour. The Freezer will get slightly chilled and the motor will run smoothly.

4. After powering the Refrigerator, it will take a few hours to reach the appropriate temperature. You can

store food and drinks in the Refrigerator after the temperature is sufficiently cool.

Check the accessories listed below.

Compression fitting

Compression nut

Hex Wrench Fastener

Required Tools (Not provided)

Phillips screwdriver(+) Flat-blade screwdriver(-)

Socket Wrench

(10mm) (for bolts)

Hex Wrench (3/16")

(for Mid hinge)

Pliers

REMOVING THE REFRIGERATOR DOORS

Some installations require door/drawer removal to transport the Refrigerator to its final location.

Do not remove the door/drawer if it is not needed. Before removing the door/drawer make sure you read

following items.

WARNING

Disconnect power to the Refrigerator before removing the door or drawer.

Be careful not to drop, damage or scratch the door/drawer while removing them.

Be careful not to get injured while removing the door/drawer.

Reattach the door/drawer properly to avoid:

- Moisture from air leakage.

- Uneven door alignment.

- Wasting energy due to improper door seal.

10 sett]g up

Disassembling the fridge door

A Be careful not to drop and scratch the fridge door while removing the fridge door!

WARNING

Socket wrench

1. Remove the 3 screws holding down the top table and remove

2. Disconnect electric wire on the top of the refrigerator.

3. Remove the 3 hex bolts that

it.

ground wire

4. Remove the screw that holds the ground wire with a philips

screwdriver(+).

5. Separate the hinge from the electric wire and ground wire as

shown above.

6. Lift the door straight up to

Disassembling the freezer door (DRAWER TYPE - RF217,RF197)

hold the hinge on the top of

the refrigerator with the 10mm socket wrench,

remove. Be careful not to drop and

scratch the doors while removing them.

1. Separate the cap on the middle hinge.

2. Remove the screw attached to the left and right middle hinges with a philips screwdriver(+). Remove the 2 hex head bolts attached to the left and right middle hinges with an allen wrench(3!16").

settqg up 11

Door

3. After opening the Freezer door, lift the drawer box.

4. Remove 4 hex head bolts from both sides with a socket

wrench(10ram)

Disassembling the freezer door (SWING TYPE - RF195)

1. Separate the Cap on the Middle Hinge.

2. Remove the screw attached to the left and right middle hinges with a philips screwdriver(+). Remove the 2 hex head bolts attached to the left and right middle hinges with an allen wrench(3!16").

5. Lift up the freezer door from the rails.

Be careful not to drop and scratch the freezer door.

3. Remove the Middle Hinge connected to the Freezer.

12 setting up

4. Lift up the freezer door from the hinge.

Be careful not to drop and

scratch the freezer door.

Reassembling the fridge door

1. Insert and tighten the screw into the left and right middle hinges with a philips screwdriver(+).

4. Place the hole in the bottom of the left door over the middle

hinge.

2. Insert and tighten the 2 hex head 3. Replace the middle hinge cap. bolts into the left and right middle hinges with an allen wrench(3!16").

5. Insert the left upper hinge shaft into the hole on the corner of the

fridge door.

6. Insert the upper hinges into the holes at the top of the door. Insert and tighten the 3 hex head

bolts into the left and right upper hinges with a socket wrench.

7. Insert and tighten the ground screw into the left and right upper hinges with a philips screwdriver(+).

8. Connect the electronic wire on the top of the refrigerator.

9. Position the top table in place. Insert and tighten the 3 screws

into the top table with a philips screwdriver(+).

settng up 13

Reassembling the freezer door (DRAWER TYPE - RF217,RF197)

1. Pull out the rails to the full length on each sidle of the cabinet

evenly.

4. With the drawer pulled out fully,

insert the drawer box into the rail

system.

2. Hang the freezer door front onto open slot on the sides.

Reassembling the freezer door (SWING TYPE - RF195)

3. With the 10mm wrench, reattach 4 bolts to connect the rail with

the door.

1. Place the hole in the bottom of the freezer door over the right

side low hinge.

14 settiqg up

2. Replace the middle hinge connected to the freezer.

3. Insert and tighten the screw into the left and right middle hinges with a philips screwdriver(+). Insert and tighten the 2 hex head bolts into the left and right middle hinges with an allen wrench(3!16").

4. Replace the cap on the middle hinge.

ADJUSTING THE DOORS

Now that the doors are back on the Refrigerator, you want to make sure the Refrigerator is level so that you can make final adjustments. If the Refrigerator is not level, it will not be possible to get the doors perfectly even.

When the Left door is lower than the Right door,

Insert a flat-blade screwdriver into a notch on the left control lever, turn it clockwise or counter-clockwise

to level the left door.

I Lever

Screwdriver(-)

When the Left door is higher than the Right door.

Insert a flat-blade screwdriver into a notch on the right control lever, turn it clockwise or counter-clockwise

to level the right door.

Control

Screwdriver(-)

Z_ Both control levers must be surely touching the floor to avoid the possible personal injury or property

CAUTION damage because of tipping.

sett _g up 15

S tt upyourFror DoorRefr erator

MAKING MINOR ADJUSTMENTS BETWEEN DOORS

Remember, a level Refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the Refrigerator.

When the left

door is lower

than the right

door.

1. Pull out the freezer drawer (1), then you can see the middle hinge (2).

2. Insert the supplied hex wrench ( 3 ) into the shaft (4) of the middle hinge.

3. Please adjust the height by turning the hex wrench (3) clockwise ( ) or counter-clockwise ( ).

When the left

door is higher

than the right

door.

o,....

When you turn the hex wrench counter-clockwise( ), the door will move up.

1. After adjusting the doors, please insert the supplied fastener (5 ) using Pliers ( 6 ) in the gap between the hinge-grommet (7 ) and the middle hinge ( 8 ). The number of fasteners you'll need to insert

depends on the gap.

2 fastener are enclosed with the refrigerator.

The thickness of each fastener is 0.04".

16 sett]g up

INSTALLATION OF THE WATER LINE

Before You Install the water line

• The water line installation is not warranted by the refrigerator manufacturer. So before you install the water line, read the whole steps for installing and follow these instructions carefully to minimize the risk of expensive water damage.

,, Banging pipes (water banging in the pipes) in house plumbing can cause damage to fridge parts and

lead to water leakage or flooding. Call a qualified plumber to correct the problem before installing the

water supply line to the fridge.

• To prevent burns and product damage, do not hook up the water line to the hot water line.

• Do not install the water line in areas where temperatures fall below freezing.

• When using any electrical device (such as a power drill) during installation, be sure the device is insulated or wired in a manner to prevent electric shock.

• All installations must be in a accordance with local plumbing code requirements.

• Water line Kit and water filter are not covered by Samsung's Warranty. The manufacturer (or dealer,

installer) of them is responsible for any defects and all the loss caused by water filter & water line kit.

• The filter should be replaced according to manufacturer (or dealer)'s instruction.

• To order additional water filters, please contact the manufacturer (or dealer) of the filter.

Using the water filter (not provided)

Connecting to water supply line

• Shut off the main water supply line and turn the Ice maker to

the off position.

• Locate the nearest cold drinking water line.

• Follow the instructions in the water filter installation kit.

• After connecting the water supply line to the Cartridge Holder inlet (insert plastic line in fully), install the Filter Cartridge.

• Turn on water supply and Flush 3 gallons through filter before use (flush approximately 6 minutes)

If you want to install a water filter, it must be installed outside

the refrigerator.

It is not provided with your new refrigerator. The filter cartridge (8) and holder (9) kit can be purchased from the retailer where

you purchased this refrigerator.

Do not use copper line.

Cut the tubing, making sure the ends are square and clean.

6 5 4

Incorrect Correct

1.ColdWaterline

2.PipeClamp.

3.Plastic line

4.CompressionNut

5.CompressionSleeve

6.PackingNut

7.ShutOffValve

8.FilterCartridge

9.CartridgeHolder

sett qr#up 17

Sortr r

Connect the water line to the fddge

,, Connect the plastic line on the back of your fridge to the cartridge

holder outlet (fully insert the plastic line to the cartridge holder

outlet).

, Insert plastic clip to the cartridge holder inlet and outlet. , Turn water on and check for any leakage.

You can purchase the necessary filter cartridge at the retailer

where you purchased this refrigerator. Make sure you buy the

SAMSUNG filter cartridge (Replacement cartridge No • DA29- 00015A) to ensure the best performance.

The water line must be connected to drinkable water only

A compression fitting and nut kit is supplied with the unit and it is inside the fridge drawer.

When pushing the Refrigerator back, make sure you don't roll over the power cord or water

Iine(Icemaker supply line)

To use without the water filter

DoorR fr orator

Cartridge

!H,_ : lao,der

""___ii I\'"" cl't.._l.[_i,'

\%1 "_ Filter

- "$-. I I.._a""ege

LC;;;s,;Zino

(Provided)

Connecting to the water supply line

, Shut off the main water supply line and turn the Ice maker to the

off position.

, Locate the nearest cold water drinking line.

Connect the water line to the fridge

1) Slip the compression nut through the plastic tubing.

2) After inserting the compression nut into plastic tubing, tighten the compression nut onto 1/4" compression fitting(Provided).

Do not overtighten the compression nut.

,, Using Copper Tubing

- Slip the compression nut and ferrule on copper tubing as shown.

, Using Plastic Tubing

- Insert the molded end(Bulb) of the plastic tubing into the compression fitting.

A Do not use without the molded end(Bulb) of the plastic tubing.

CAUTION

3) Tighten the compression nut onto the compression fitting.

4) Turn water on and check for any leakage.

1.ColdWaterline 2,PipeClamp.

I_ ---_1 3.P.astic.ine

7.._ _.-.._.'_2 4.CompressionNut f..]---3 5.CompressionSleeve

q-_l /_-_J_ 6.PackingNut.

[ "_1 (k/_/))/i \____ShutOff Valve

6 5 4 ...L_j _G

Household water line

Copper tubing or Plastic tubing (Not supplied) (Not supplied)

Compression Nut

(1t4")(Purchased)

(Purchased) _,

Plastic

Tubing

(Provided)

Refrigerator

I_-_ Compression

fitting (Provided)

Compression Nut (1/4)(Provided)

, Water line must be connected to drinkable water only. , When pushing the Refrigerator back, make sure you don't roll over the power cord or water line

18 settiqg up

(Icemaker supply line).

©poratr

PARTSAND FEATURES

Use this page to become more familiar with the parts and features of the Refrigerator.

Fridge Light

Door Bin

Glass Shelf

Vegetable & Fruit

Drawer

Pull Out Drawer

Freezer Drawer

Bin

Moving Tray (Locationisadjustable)

Door Bin

Bottle Bin

Freezer Light

Operati-_r#19

©porch

USING THE CONTROL PANEL

G Ro rcjor tor

Temperature & Function select / control panel

(_) Ice Off Button

(_} Power Freeze Button

(_) Freezer Button

(_) Fridge Button

(_) Power Cool Button

(_) E.Saver Button the Energy Saver function off.

When the Ice Off Button is pressed, ice will not be produced. Use this function only when it is needed.

Press this button to freeze food quickly. (Power Freeze will last 2 and a half hours.)

Freezer temperature set button. Press this button to set the Freezer temp between 8°F and -8°R (At initial power on, the default setting is -2°R)

Fridge temperature set button. Press this button to set the Fridge temperature in 2°F intervals between 46°F and 34°R

(At initial power on, the default setting is 38°R)

Press this button to cool the food inthe fridge quickly. (Power Cool will shut off when 25°F is reached or after 2 and a half hours.

Press the Energy Saver button for better energy efficiency. Ifwater drops appear on the doors, turn

CONTROLLING THE TEMPERATURE

ice Off Power Freeze Freezer

D Q

-2'F is Recommended 38°F iS Recommended

Fridge Power Cool E.Saver

D Q

Setting the freezer temperature

If you want to control the freezer temperature, follow as below. Press the Freezer Button (Refer the picture)

- The temperature can be set in 2°F interval between -8°F and 8°R

- Each time the Freezer Button is pressed, the temperature setting will change as follows; (_2OF-+ _4OF-+ _6OF-+ _8OF-+ 8OF-+ 6OF -+ 4OF-+ 2OF -+ 0OF-+ _2OF)

When selecting the temperature, the set temperature is displayed initially for 5 seconds, then the actual temperature is displayed. (There may be slight difference between the set temperature and displayed actual temperature, but it will be corrected to the set

temperature automatically.)

:'ower Freeze Freezer

-2°F is Recommended

- The Freezer temperature will change depending on the number of door openings, quantity of food,

ambient temperature, etc.

- The temperature display will blink when freezer temperature increases due to frequent door opening, keeping warm food, etc.

(Blinking will stop when the refrigerator reaches normal temperature. If for some reason it does not stop after a long period of time, contact a Samsung service center.)

Setting the fridge temperature

If you want to control the fridge temperature, follow as below. Press the Fridge Button (Refer the picture)

- The temperature can be set in 2°F interval between 34°F and 46°R

- Each time the Fridge Button is pressed, the temperature setting will change as follows; (38OF-+ 36OF -+ 34OF -+ 46OF -+ 44OF -+ 42OF -+ 40OF -+ 38OF)

Operati-_g21

+ 47 hidden pages