Samsung q40 Service Manual

이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다.
This Document can not be used without Samsung's authorization.

Assembly and Disassembly

4.

1) Q40

Part Picture Description

Assembly and Disassembly

1. Separate the AC adapter and the
battery certainly before disjoint system.

2. Push out the battery on like figure 2
after have pushed latches with figure 1
to both side

3. Remove the Bottom Screws.

Main

System

4. To remove the Keyboard, lift the
hook up.

5. Pull out the FPC after lift the
Connector Lock.

SENS Q40 < 4 - 1 >

이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다.
This Document can not be used without Samsung's authorization.

4. Disassembly and Assembly

Part Picture Description

6. Remove the Thermal Plate의 Screw
(4ea).

7. Remove the Hinge Cap by using
the tweezers.

Main

System

8. Remove the screws(2EA) and LCD
cable screw(1EA) at yellow circle that
combine Hinge and Top.

9. Pull out the LCD cable and detach
the LCD Assy

( Caution : When separate the Antenna cable
first separate antenna from Bottem by using
tweezers then separate each antenna by using
hand cautiously)

SENS Q40 < 4 - 2 >

이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다.
This Document can not be used without Samsung's authorization.

4. Disassembly and Assembly

Part Picture Description

10. Afer saparating the LCD Assy,
remove the 3 in 1 Dummy card and
TOP screw(2 EA).

11.

11. Lift up the HDD Connector then
separate HDD FPC andHDD

Main

System

12. Separate the TOP and Bottom
pulling out the TOP like arrow direction.

( Caution : Separate the Top cautioously not
to be broken.)

13. Separate the Touchpad FPC from
Main Board’s Connector

SENS Q40 < 4 - 3 >

이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다.
This Document can not be used without Samsung's authorization.

4. Disassembly and Assembly

Part Picture Description

14. Disassemble the Power, Bluetooth,
Speaker, RTC Batt,
Wireless Lan, cable of Docking
Connector (reference the blue mark).

15. Remove the Screws of Option
board(8EA)

Main

System

16. This is the picture of disassembled
material

17. Remove the screws(5 ea) which
assemble the bottom and main board
And remove the docking connector also

SENS Q40 < 4 - 4 >