Samsung PS50A650T1F, PS58A650, PS58A650T1F User Manual
Plasma TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please
register your product at
www.samsung.com/global/register
Model Serial No.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Country Customer Care Centre Web Site
AUSTRALIA 1300 362 603 www.samsung.com/au
CHINA
HONG KONG 3698-4698 www.samsung.com/hk
INDIA
INDONESIA 0800-112-8888 www.samsung.com/id
JAPAN 0120-327-527 www.samsung.com/jp
MALAYSIA
NEW ZEALAND 0800SAMSUNG(726-7864) www.samsung.com/nz
PHILIPPINES 1800-10-SAMSUNG(726-7864) www.samsung.com/ph
SINGAPORE 1800-SAMSUNG(726-7864) www.samsung.com/sg
THAILAND
TAIWAN 0800-329-999 www.samsung.com/tw
VIETNAM 1 800 588 889 www.samsung.com/vn
SOUTH AFRICA 0860-SAMSUNG(726-7864) www.samsung.com/za
U.A.E
800-810-5858
010-6475 1880
3030 8282
1800 110011
1800-88-9999
1800-29-3232
02-689-3232
800-SAMSUNG (726-7864)
8000-4726
www.samsung.com.cn
www.samsung.com/in/
www.samsung.com/my
www.samsung.com/th
www.samsung.com/mea
BN68-01703A-00
User Instructions
Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the
plasma monitor panel for more than 2 hours as it can cause screen image retention. This image
retention is also known as “screen burn”. To avoid such image retention, reduce the degree of
brightness and contrast of the screen when displaying a still image.
Height
The PDP can normally operate only under 2000m in height. It might abnormally function at a place
over 2000m in height so do not install and operate there.
Heat on the top of the PDP TV
The top side of the product may be hot after long period of use as heat dissipates from the panel
through the vent hole in the upper part of the product. This is normal and does not indicate any defect
or operation failure of the product. However, children should be prevented from touching the upper
part of the product.
The product is making a ‘cracking’ noise.
A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding
environment such as temperature or humidity. This is normal and not a defect of the unit.
Cell Defects
The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require
sophisticated technology to produce. However, there may be few bright or dark pixels on the screen.
These pixels will have no impact on the performance of the product.
Avoid operating the TV at temperatures below 5°C(41°F)
A still image displayed too long may cause permanent damage to the PDP Panel.
Afterimage on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may
produce partial afterimages. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when
displaying still images.
Warranty
- Warranty does not cover any damage caused by image retention.
- Burn-in is not covered by the warranty.
Installation
Be sure to contact an authorized service centre, when installing your set in a location with heavy
dust, high or low temperatures, high humidity, chemical substance and where it operates continually
such as the airport, the train station etc. Failure to do so may cause a serious damage to your set.
Watching the PDP TV in 4:3 format for a long period of time may leave traces
of borders displayed on the left, right and centre of the screen caused by the
difference of light emission on the screen. Playing a DVD or a game console
may cause similar effect to the screen. Damages caused by the above effect are
not covered by the Warranty.
Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2)
digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive
DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with
the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not be
available in some countries.
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
English - 2
English - 3
Contents
English
General Information
User Instructions ............................................. 2
Checking Parts ................................................4
Using the Stand-Base ..................................... 4
Control Panel ..................................................5
Connection Panel ............................................6
Viewing the Remote Control ...........................8
Operation
Switching Your Television On and Off ............. 9
Viewing the Menus ..........................................9
Plug & Play Feature ...................................... 10
Using the TOOLS Button ..............................12
Viewing External Signal Sources .................. 12
Editing Device Names ...................................13
Storing Channels Automatically .................... 14
Storing Channels Manually ........................... 15
Channel Control
Viewing the EPG (Electronic Programme
Guide) Information ........................................ 16
Viewing All Channels ....................................17
Erasing and Adding Channels ....................... 18
Setting Your Favourite Channels .................. 19
Reserving a Program (Time Viewing) ........... 20
Conrming a Viewing Reservation ................ 21
Assigning Names to Channels ...................... 22
Sorting the Stored Channels ......................... 23
Selecting and Deselecting All Channels .......24
Storing Channels in Memory (Auto Store) ....24
Setting the Channel Mode ............................ 24
Locking Channels ......................................... 25
Fine Tuning Analog Channels ....................... 25
Viewing Signal Information ........................... 26
LNA (Low Noise Amplier) ............................ 26
Picture Control
Changing the Picture Standard ..................... 27
Customizing the Picture Settings .................. 27
Conguring Detailed Settings on the Picture
Picture Options ............................................. 29
Resetting the Picture Settings to the
Factory Defaults ............................................ 31
.... 28
Sound Control
Sound Features ............................................ 32
Selecting the Sound Mode
(depending on the moel) ............................... 34
Connecting Headphones (Sold separately)...34
Function Description
Time Features ............................................... 35
Change PIN / Parental Lock / Subtitle /
Teletext Language / Preference / Melody /
Entertainment / Energy Saving / PIP
Upgrading the Software ................................40
................ 37
PC Display
Setting up Your PC Software
(Based on Windows XP) ............................... 41
Input Mode (PC) ............................................ 42
Setting the PC ............................................... 43
WISELINK
Using the WISELINK Function ...................... 45
Using the WISELINK Menu ........................... 47
Using the PHOTO (JPEG) List ...................... 48
Viewing a Photo or Slide Show ..................... 54
Using the Music List ...................................... 60
Playing a Music File ...................................... 67
Using the Setup Menu .................................. 69
About Anynet+
What is Anynet+?...........................................71
Connecting Anynet+ Devices.........................71
Setting Up Anynet+........................................72
Scanning and Switching between
Anynet+ Devices ........................................... 72
Recording ...................................................... 73
Listening through a Receiver ........................74
Check Points before Requesting Service ..... 74
Appendix
Teletext Feature (depending on the model) .. 75
Wall Mount Kit Specications (VESA) ........... 77
Auto Wall-Mount Adjustment
(Sold separately) ........................................... 78
Preparing before installing
Wall- Mount on the wall ................................. 79
How to assemble the Stand-Base
(depending on the model) ............................. 79
Troubleshooting ............................................80
Specications ................................................ 81
Symbols
Press
☛ ➢
Important
Note
Checking Parts
W.LINK
Owner’s Instructions Remote Control/
Cover-Bottom / Screws (2ea)
(Refer to page 79)
Antenna Cable Component Cables Audio Cables PC Cable
Scart Cable PC Audio Cable HDMI Cable HDMI/DVI Cable
Ferrite Core (Power Cord, S-Video, Component)
➢
The ferrite cores are used to shield the cables from
interference.
When connecting a cable, open the ferrite core and
clip it around the cable near the plug.
AAA Batteries
Ferrite Core for
Power Cord
Power Cord Cloth-Clean Warranty Card/
Ferrite Core for
S-Video
Sold Separately
Ferrite Core for
Component
Safety Guide Manual
(Not available in
all locations.)
Using the Stand-Base
Two or more people
➢
should carry the PDP.
Never lay the PDP on the
floor because of possible
damage to the screen.
Always keep the PDP
upright.
The PDP can rotate 20
degrees in right and left
directions.
English - 4
-20° ~ 20°
English - 5
Control Panel
Front Panel
The product colour and shape may vary depending on the model.
➢
1
SOURCE
Displays a menu of all of the available input
sources (TV, AV1, AV2, S-Video,
Component 1, Component 2, PC, HDMI1,
HDMI2/DVI, HDMI3, HDMI4, USB).
In the on-screen menu, use this button as
➢
you would use the ENTER button on the
remote control.
2
MENU
Press to see an on-screen menu of your TV’s
features.
3
+ VOL -
Press to increase or decrease the volume. In
the on-screen menu, use the + VOL - buttons
as you would use the ◄ and ► buttons on the
remote control.
4
CH
Press to change channels.
In the on-screen menu, use the CH
buttons as you would use the ▲ and ▼
buttons on the remote control.
5
POWER INDICATOR
Blinks and turns off when the power is on and
lights up in stand-by mode.
6
POWER
Press to turn the TV on and off.
7
REMOTE CONTROL SENSOR
Aim the remote control towards this spot on
the TV.
8
SPEAKERS
Front Panel buttons
Touch each button to
operate.
Connection Panel
Rear Panel
1
9
or
Cable Television
Network
or
432 6 85
The product colour and shape may vary depending on the model.
➢
Whenever you connect an audio or video system to your set, ensure that all elements are
☛
switched off.
When connecting an external device, match the colour of the connection terminal to the cable.
1
POWER IN
Connect the supplied power cord.
2
AV IN 1(VIDEO / AUDIO R/L)
Connect RCA cable to an appropriate external
A/V device such as VCR, DVD or Camcorder.
3
PC IN(PC) / AUDIO
Connect to the video and audio output jack on
your PC.
4
COMPONENT IN 1, COMPONENT IN 2
Audio (AUDIO L/R) and video (Y, Pb, Pr)
inputs for Component.
5
DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio Component.
6
AUDIO OUT(AUDIO R/L)
Connect RCA audio signals from the TV to an
external source, such as Audio equipment.
7
SERVICE
− Connector for service.
− Connect the serial jack between the
electro-motion wall mount bracket and your
TV when you want to adjust the TV viewing
angle using your remote control.
7
Continued...
English - 6
English - 7
8
HDMI IN 1, 2, 3
- No additional Audio connection is needed
for an HDMI to HDMI connection.
- When using an HDMI/DVI cable connection,
you must use the HDMI IN 2 jack.
What is HDMI?
➢
- “High Definition Multimedia interface”
allows the transmission of high definition
digital video data and multiple channels
of digital audio.
- The HDMI/DVI terminal supports DVI
connection to an extended device with
the appropriate cable (not supplied). The
difference between HDMI and DVI is that
the HDMI device is smaller in size, has
the HDCP (High Bandwidth Digital Copy
Protection) coding feature installed, and
supports multi - channel digital audio.
Side Panel
1
3
DVI IN(HDMI2) AUDIO L/R
DVI audio outputs for external devices.
9
ANT IN
75Ω Coaxial connector for Aerial/Cable
Network.
Supported modes for HDMI/DVI and Component
HDMI/DVI 50Hz X X X O O
HDMI/DVI 60Hz X O X X O
Component O O O O O
2
or
480i 480p 576i 576p 720p
1080i
O
O
O
1080p
O
O
O
The product colour and shape may vary depending on the model.
➢
1
HDMI IN 4
Connect to the HDMI jack of a device with
HDMI output.
2
WISELINK
Connect a USB mass storage device to view
photo files (JPEG) and play audio files (MP3).
3
S-VIDEO or VIDEO / AUDIO L/R
Video (S-Video or Video) and audio inputs
for external devices, such as a camcorder or
VCR.
4
HEADPHONES JACK
You can connect a set of headphones if you
wish to watch a television programme without
disturbing the other people in the room.
Prolonged use of headphones at a high
➢
volume may damage your hearing.
4
Viewing the Remote Control
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
16
18
19
20
21
22
23
24
25
26
The performance of the remote control may be affected by bright light.
1
POWER button
(turns the TV on and off)
2
Selects the TV mode directly
3
Number buttons for direct
channel access
4
One or more digit channel
selection
5
Temporary sound switch-off
6
Available source selection
7
Volume increase
Volume decrease
8
Electronic Program Guide
(EPG) display
9
Use to quickly select
frequently used functions.
0
Control the cursor in the
menu
!
Use to see information on
the current broadcast
@
Use these buttons in the
menu
b
Exit the on-screen menu
c
Picture size selection
d Use this when connecting
a SAMSUNG DMA (Digital
Media Adapter) device
through an HDMI interface
and switching to DMA
mode.
(The DMA button is
optional.) For more
information on the operating
procedures, refer to the user
manual of the DMA. This
button is available when “
Anynet+(HDMI-CEC)" is “
On” (see page 72)
e
Channel control button
(Refer to page 17~19)
f
Digital subtitle display
Channel list and WISELINK,
etc.
$
Press to select the optional
display and sound modes for
sports, cinema and games.
%
VCR/DVD Function (Rewind,
Stop, Play/Pause, Fast/
Forward)
^
ON/OFF
Press to backlight the
buttons on the remote.
This function is convenient
for using at night or when
the room is dark. (Using
the remote control with the
ON/OFF(
to On will reduce the battery
usage time.
&
Previous channel
*
Next channel
) light button set
Previous channel
(
Displays the main on-screen
menu
)
This function enables you to
view and play photo (JPEG)
and audio files (MP3) from
an external device. (See
page 48 (JPEG), 60 (MP3))
a
Returns to the previous
Teletext Functions
(Refer to page 75)
2
Exit from the teletext
display (depending on the
model)
6
Teletext mode selection
(LIST/FLOF)
8
Teletext store
9
Teletext size
!
Teletext reveal
@
Fastext topic selection
#
Teletext display/mix both
teletext information and the
normal broadcast
&
Teletext sub page
*
P :Teletext next page
P
:Teletext previous
page
(
Teletext index
a
Teletext hold
b
Teletext cancel
Continued...
English - 8
English - 9
Installing Batteries in the Remote Control
1 Lift the cover at the back of the remote control upward as shown in the
figure.
2 Install two
➢
3 Close the cover as shown in the figure.
➢
If the remote control doesn’t work! Check the following:
➢
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power cut, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with the
diagram inside the compartment.
Using the remote control with the ON/OFF( ) light button set to
On will reduce the battery usage time.
Remove the batteries and store them in a cool and dry place if you
won’t be using the remote control for a long time. The remote control
can be used up to about 23 feet from the TV. (Assuming typical TV
usage, the batteries last for about one year.)
Switching Your Television On and Off
The mains lead is attached to the rear of the television.
1 Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
➢
2 Press the
the remote control to switch the television on. The channel that you were watching last is re-selected
automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Storing
Channels Automatically” on page 14 or “Storing Channels Manually” on page 15.
➢
3 T
o switch the television off, press the (Power) button (On/Off) on the front of the television or press
the POWER button on the remote control.
4 T
o switch the TV on, press the (Power) button (On/Off) on the front of the TV or press the POWER
button or number buttons on the remote control.
(Power) button (On/Off) on the front of the television or press the POWER button on
If the television is initially powered on, several basic customer settings proceed automatically.
Refer to “Plug & Play Feature” on page 10.
Viewing the Menus
1 Press the MENU button.
The main menu is displayed on the screen.
Its left side has six icons: Picture, Sound, Channel,
Setup, Input, and Application
2 Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
3 Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4 Press the ▲/▼/◄/► button to change the selected items.
Press the RETURN button to return to the previous menu.
5 Press the EXIT button to exit from the menu.
Picture
Mode : Standard
Cell Light : 7
Contrast : 95
Brightness : 45
Sharpness : 20
Colour : 50
Tint (G/R) : G50/R50
Detailed Settings
Plug & Play Feature
When the television is initially powered on, several basic customer settings proceed automatically
and subsequently. The following settings are available.
If you accidentally select the wrong country for your TV, the characters on the screen may be wrongly
☛
displayed.
Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2)
☛
digital terrestrial signals are broadcasted. Please confirm with your local dealer if you can receive
DVB-T signals. Although this TV set follows the DVB-T specification, maintaining compatibility with
the future coming DVB-T digital terrestrial broadcasts is not guaranteed. Several functions may not
be available in some countries.
The Screen Saver is activated if there is no remote control key input for longer than 1 minute while
➢
Plug & Play is running.
1 If the television is in standby mode, press the POWER
button on the remote control. The message The menu
Language, Store Demo, Channels and Time will be
set. is displayed.
2 Press the ENTER button to confirm your choice.
The message Select ‘Home Use’ when installing this
TV in your home. is displayed.
3 Press the ◄ or ► button to select Store Demo or Home
Use, then press the ENTER button. The message to
check the connected status of the antenna is displayed.
The default selection is Home Use.
➢
We recommend setting the TV to Home Use mode
➢
for the best picture in your home environment.
Store Demo mode is only intended for use in retail
➢
environments.
If the unit is accidentally set to Store Demo mode
➢
and you want to return to Home Use (Standard):
Press the Volume button on the TV.
When the volume OSD is displayed, press and hold
the MENU button on the TV for 5 seconds.
4 Press the ▲ or ▼ button to select the channel source to
memorize. Press the ENTER button to select Start.
Digital & Analogue: Digital and Analog channels.
Digital: Digital channels.
Analogue: Analog channels.
The channel search will start and end automatically
.
Press the ENTER button at any time to interrupt the
memorization process.
After all the available channels are stored, the message
Set the Clock Mode is displayed.
Plug & Play
The menu Language, Store Demo, Channels and Time
will be set.
OK
Entrer
Plug & Play
Select 'Home Use' when installing this TV in your home.
Store Demo
Select the channel source to memorize.
Digital & Analogue
Digital
Analogue
Auto Store in progress. Channel 6
Digital Channels: 0
Analogue Channels : --
Auto Store is completed.
Digital channels: 20
Analogue channels: 36
Plug & Play
Move
Plug & Play
Stop
Plug & Play
OK
Home Use
EnterMove
Start
Start
Start
SkipEnter
3%
Enter Skip
Enter Skip
Continued...
English - 10
English - 11
To stop the search before it has finished, press the
➢
ENTER button with stop selected.
Press the ◄ or ► button to select
the
ENTER button. The Auto Store menu then
reappears. Press the
ENTER button when channel
Yes, then press
memorization is complete.
5 The message Set the Clock Mode is displayed. Press
the ENTER button. Press the ▲ or ▼ button to select
Manual for setting the current time manually, then press
the ENTER button. The message Set current date and
time. is displayed.
If you select Auto, Select the time zone where you
➢
are located. is displayed, then go to step 8.
6 Press the ◄ or ► button to move to Day, Month, Year,
Hour or Minute Set the date and time you want by
pressing the ▲ or ▼ button, then press the ENTER
button.
You can set the Day, Month, Year, Hour and
➢
Minute directly by pressing the number buttons on
the remote control directly by pressing the number
buttons on the remote control.
7 The message Enjoy your viewing. is displayed. When
you have finished, press the ENTER button.
Even if the ENTER button is not pressed, the
➢
message will automatically disappear after several
seconds.
Setting the Clock Automatically...
8 Press the ▲ or ▼ button to highlight the time zone
for your local area (and to move the highlight to the
appropriate time zone on the map of the Australia).
Press the ENTER button.
9 The message Enjoy your viewing. is displayed.
When you have finished, press the ENTER button.
Even if the ENTER button is not pressed, the
➢
message will automatically disappear after several
seconds.
If you want to reset this feature …
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Setup, then press the
ENTER button.
3 Press the ENTER button again to select Plug & Play.
The message Start Plug & Play is displayed.
4 Enter your 4 digit PIN number. The default PIN number of
a new TV set is “0-0-0-0”.
When there is a locked channel by Child Lock
➢
setting, PIN input screen appears. (refer to page 25)
For further details on setting up options, refer to the
➢
pages 10-11.
The Plug & Play feature is only available in the TV
➢
mode.
Plug & Play
Set the Clock Mode.
Clock Mode : Auto
Set current date and time
Day
0 1
Hour
1 2
Set the Clock Mode.
Clock Mode : Auto
Select the time zone where you are located.
New South Wales/ACT
Victoria
Queensland
South Australia
Western Australia
Tamania
▼
Setup
Plug & Play ►
Time
Change PIN
Parental Lock
Subtitle
T
eletext Language : ----
Preference
all-Mount Adjustment
W
Auto
Manual
Move
Plug & Play
Month
0 1
Minute
0 0
Plug & Play
Enjoy your Viewing.
OK
Plug & Play
Auto
Manual
Move
Plug & Play
Move
Enter Skip
Year
2 0 0 8
SkipEnterAdjustMove
Enter Skip
Enter Skip
Using the TOOLS Button
You can use the TOOLS button to select your frequently used functions quickly and easily.
The TOOLS menu changes depending on which external input mode you are viewing.
1 Press the TOOLS button.
The TOOLS menu will appear.
2 Press the ▲ or ▼ button to select a menu, then press the
ENTER button.
3 Press the ▲/▼/◄/►/ENTER buttons to display, change,
or use the selected items.
For a more detailed description of each function, refer to
the corresponding page.
• Device List, see page 72
•
Picture Mode, see page 27
•
Sound Mode, see page 32
•
Sleep Timer, see page 35
SRS TS XT, see page 32
•
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual I II : Mono
TOOLS
Device List
Move Enter Exit
• Energy Saving, see page 39
• Dual I II, see page 34
• PIP, see page 39
• Auto Adjustment, see page 43
Viewing External Signal Sources
You can switch between viewing signals from connected
equipment, such as a VCR, DVD, Set-Top Box, and the TV
source.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Input, then press the
ENTER button.
3 Press the ENTER button again to select Source List.
4 Press the ▲ or ▼ button to select the signal source, then
press the ENTER button.
A
vailable signal sources: TV, AV1, AV2, S-Video,
Component1, Component2, PC, HDMI1, HDMI2/DVI,
HDMI3, HDMI4 USB
You can choose only those external devices that are
➢
connected to the TV.
Using the Color buttons on the remote with the Source list.
➢
• Red (Refresh): Refreshes the connecting external
devices.
•
(Option): Displays the Edit Name and
Information menus.
Input
Source List
Edit Name
TV
AV1
AV2
S-Video
Component1
Component2
PC -----
Refresh
----
----
----
----
----
Option
You can select these options simply by pressing the
➢
SOURCE button on the remote control.
To watch television programme again, press the TV/DTV
➢
button and select the channel number required.
English - 12
English - 13
Editing Device Names
You can give a name to the external source.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Input, then press the
Input
ENTER button.
3 Press the ▲ or ▼ button to select Edit Name, then press
the ENTER button.
4 Press the ▲ or ▼ button to select the external source to
be edited, then press the ENTER button.
5 Select the required device by pressing ▲ or ▼, then press
the ENTER button.
A
vailable device names: VCR, DVD, Cable STB, Satellite
STB, PVR STB, AV Receiver, Game, Camcorder, PC, TV,
IPTV, Blu-Ray, HD DVD, Digital Media Adapter.
6 Press the EXIT button to exit.
AV1 :
AV2 :
S-Video :
Component1 :
Component2 :
PC :
HDMI1 :
AV1 :
AV2 :
S-Video :
Component1 :
Component2 :
PC :
HDMI1 :
Source List
Edit Name ►
Edit Name
----
►
----
----
----
----
----
----
Enter ReturnMove
Edit Name
----
----
----
VCR
----
DVD
----
Cable STB
----
Satellite STB
PVR STB
Move
Enter
Return
Storing Channels Automatically
You can scan for the frequency ranges available to you (availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. However you can sort numbers manually and clear any channels you do not wish to
watch.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Auto Store, then press
the ENTER button.
4
Press the ▲ or ▼ button to select the channel source to
memorize. Press the ENTER button to select Start.
Digital & Analogue: Digital and Analog channels.
➢
Digital: Digital channels.
Analogue: Analog channels.
Scans for all channels with active broadcast stations
➢
and stores them in the TV’s memory.
If you want to stop Auto Store, press the ENTER
➢
button.
Stop Auto Store? message will be displayed.
The
Select Yes by pressing the ◄ or ► button, then
press
the ENTER button.
5
Press the EXIT button to exit.
When there is a locked channel by Child Lock
➢
setting, PIN input screen appears. (refer to page 25)
Channel
Auto Store
►
Manual Store
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Channels
Child Lock : On
Plug & Play
Select the channel source to memorize.
Digital & Analogue
Digital
Analogue
Move
Plug & Play
Auto Store in progress. Channel 6
Digital Channels: 0
Analogue Channels : --
Stop
Plug & Play
Auto Store is completed.
Digital channels: 20
Analogue channels: 36
OK
Start
Start
Start
Return
Enter
Enter3%Return
Enter Return
English - 14
English - 15
Storing Channels Manually
You can store television channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Manual Store, then
press the ENTER button.
4 Select the required option by pressing the ▲ or ▼ button,
then press the ENTER button.
5
When you are satisfied with your setting, press the ENTER button.
6 Press the EXIT button to exit.
Digital Channel
Channel
Press the ▲, ▼ or numeric buttons (0~9) to select a channel.
The available channels are 5~69. The corresponding
frequency for the selected channel is automatically set
Frequency
You can specify the frequency (KHz) using the numeric buttons
(0~9). If you do not know the exact frequency, follow the above
step to select the frequency automatically using channel.
Bandwidth
Press the ▲ or ▼ button to select a bandwidth. The
available bandwidths are 7 and 8 MHz.
Analogue Channel
Programme (Programme number to be assigned to a
channel)
Press the ▲ or ▼ button until you find the correct number.
You can also select the channel number directly by
➢
pressing the numeric buttons (0~9).
Colour System: Auto/P
AL/SECAM/NTSC4.43
Press the ▲ or ▼ button to select the required colour standard.
Sound System: BG/DK/I/L
Press the ▲ or ▼ button to select the required sound
standard.
Channel (When you know the number of the channel to be stored)
Press the ▲ or ▼ button to select C (Air channel) or S
(Cable channel).
Press the ► button, then press the ▲ or ▼ button to select
the required number.
You can also select the channel number directly by
➢
pressing the numeric buttons (0~9).
If there is abnormal sound or no sound, re-select the
➢
sound standard required.
Search (When you do not know the channel numbers)
Press the ▲ or ▼ button to start the search.
The tuner scans the frequency range until the first channel or the channel that you selected is
received on the screen.
Store (When you store the channel and associated programme number)
Set to OK by pressing the ENTER button.
Channel mode
➢
- P (Programme mode): When completing tuning, the broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You can select a channel by entering the position
number in this mode.
-
C (Air channel mode): You can select a channel by entering the assigned number to each air
broadcasting station in this mode.
-
S (Cable channel mode): You can select a channel by entering the assigned number for each cable
channel in this mode.
Auto Store
Channel
Manual Store ►
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Channels
Lock : On
Child
Fine Tune
Auto Store
Channel
Manual Store ►
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Channels
Lock : On
Child
Fine Tune
Manual Store
5
1
- -
Frequency
1 7 8 7 5 0 K Hz
AdjustMove
Manual Store
Colour System
A U T O
Search
4 0 M Hz
Channel
Programme
Channel
C
Digital Channel
Analogue Channel
Bandwidth
8 M Hz
Search
Sound System
B G
Store
?
AdjustMove
Return
Return
Viewing the EPG (Electronic Programme Guide) Information
The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme
entries may appear blank or out of date as a result of the information broadcast on a given
channel. The display will dynamically update as soon as new information becomes available.
1 Press the MENU button to display the menu.
2
Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3
Press the ▲ or ▼ button to select Full Guide, Mini Guide
or Default Guide then press the ENTER button.
Full Guide
For the six channels indicated in the left-hand column, displays
the Current programme and the Next programme information.
One hours of programme information is displayed
➢
which may be scrolled forwards or backwards in time.
Mini Guide
The information of each program is displayed by each line
on the current channel Mini Guide screen from the current
program onwards according to the program starting time
order.
Select a programme by pressing the ▲/▼
/◄/► button.
If the next progrmme is selected, it is
scheduled with the clock icon displayed. If
▲/▼/◄/►,
(ENTER)
the ENTER button is pressed again, press
the ▲/▼/◄/► button to select Cancel
Schedules, the scheduling is canceled
with the clock icon gone.
For details about scheduling programmes,
refer to the section.
RED
Toggle between the Mini Guide or Full
Guide.
Full Guide: Scroll backwards quickly (24
GREEN
hours).
Mini Guide: Display next page quickly.
Full Guide: Scroll forwards quickly (24
YELLOW
hours).
Mini Guide: Display previous page quickly.
BLUE Exit the guide.
INFO button for the detailed information.
Channel Number, Running Time, Status
Bar, Parental Level, Video Quality
Information (HD/SD), Sound Modes,
INFO
Subtitle or Teletext, languages of Subtitle
or Teletext and brief summary of the
highlighted programme are included
on the detailed information. “…” will be
appeared if the summary is long.
Default Guide: Mini Guide/Full Guide
Press the ▲ or ▼ button to select Mini Guide or Full
Guide. Press the ENTER button. The selected guide
menu is displayed.
You can also display the guide menu simply by
➢
pressing the GUIDE button.
Auto Store
Manual Store
Channel
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Channels
Child Lock : On
Fine Tune
Signal Information
Full Guide
DTV 805 BBCi
BBCi
18:00~0:00
Today 18:00~19:00 19:00~20:00
▲801 BBC NEWS 24 BBC Ne.. BBC News
802 BBC ONE BBC Ne.. Departure Lounge
803 BBC THREE
804 BBC THREE
805 BBCi
▼806 Canal 7
Watch
Channel
Mini Guide DTV 801 BBC NEWS 24
18:00 BBC News
18:30 Sportsday
19:00 BBC News
Watch
Channel
BBCi-featuring news, sport, weather and TV..
This is BBC THREE
This Weakest L..
BBCi
information
Mini Guide
INFO
Manual Store
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Channel
Mode : Added Channels
Child Lock : On
Fine Tune
Signal Information
information
INFO
Full Guide Exit
Full Guide
Mini Guide
Default Guide
Channel List
Channel
Mode : Added Channels
Child Lock : On
Fine Tune
Signal Information
LNA :
18:08 Fri 5 Aug
The 7 O’..
Tsunami..
No Information
+24 Hours
Next Page
Mini Guide
: Mini GuideMini Guide
Full Guide
On
Exit
English - 16
English - 17
Viewing All Channels
Show all currently available channels. To use the Channel List function, first run Auto Program.
1 Press the MENU button.
Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
Press the ▲ or ▼ button to select Channel List, then
press the ENTER button.
2 Press the ◄ button to select Added Channels.
3 Press the ▲ or ▼ button to select All Channels, then
press the ENTER button. Shows all currently available
channels.
4 Press the ▲ or ▼ button to select a channel to view
press the
ENTER button.
, then
Press the CH LIST button on the remote control to bring
Mini Guide
Channel
Default Guide : Mini Guide
Channel List
Channel Mode : Added Channels
Child Lock : On
Fine Tune
Signal Information
LNA : On
824 UKTV Gold
Added Channels
Added Channels
825 UKTV style
1 C --
2 C -3 C -4 C -5 C -6 C -7 C -8 C --
All Channel Type Zoom
824 UKTV Gold
Added Channels
825 UKTV style
1 C --
2 C -3 C -4 C -5 C -6 C -7 C -8 C --
All Channel Type Zoom
824 UKTV Gold
Added Channels
825 UKTV style
1 C --
2 C -3 C -4 C 5 C -6 C -7 C -8 C --
All Channel Type Zoom
Select Option
Select Option
Delete
Add to Favourite
Timer Viewing
Edit Channel Name
Sort
Select All
Select Option
▼
up the channel lists.
Using the Color buttons on the Remote with the Channel List
• Red (Antenna): Toggle between your TV, Radio, Data/
Other and All.
• Green (Zoom): Enlarges or shrinks a channel number.
• Yellow (Select): Selects multiple channel lists.
•
(Option): Displays the Delete(or Add), Add to
Favourite(or Delete from Favourite), Lock, Timer
Viewing, Edit Channel Name, Sort, Edit Channel
Number, Select All, Deselect All or Auto Store menu.
(The Options menus may differ depending on the
situation.)
A gray-colored channel indicates the channel has been deleted. The add menu doesn't show deleted
➢
channels.
A channel marked with ♥ mark means the channel has been set as a Favourite.
➢
The Delete from Favourite menu only appears for channels with the ♥ mark.
Erasing and Adding Channels
You can delete or add a channel to display the channels you want.
1 Press the MENU button.
Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
Channel
Press the ▲ or ▼ button to select Channel List, then
press the ENTER button.
2 Press the ◄ button to select Added Channels.
3 Press the ▲ or ▼ button to select All Channels.
Shows all currently available channels. Press the ENTER
button.
4 Press the ▲ or ▼ button to select a channel to delete, then
Added Channels
press the TOOLS button.
5 Press the ENTER button to select Delete.
All deleted channels will be shown on All Channels menu.
Added Channels
6 Press the EXIT button to exit.
You can also add a channel to the Added Channels
➢
menu in the same manner.
A channel must be deleted before it can be added
➢
back to the Added Channels list.
To Add (Restore) a channel back to the Added
➢
Channel List, follow steps 1-3 above, press the ▲ or
Added Channels
▼ button to select a channel to add, the press the
TOOLS button. Press the ENTER button to select Add.
Press the CH LIST button on the remote control to
➢
bring up the channel lists.
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Channels
Child Lock : On
Fine Tune
Signal Information
LNA : Off
824 UKTV Gold
825 UKTV style
1 C --
2 C -3 C -4 C -5 C -6 C -7 C -8 C --
All
Channel Type Zoom
All Channel Type Zoom
824 UKTV Gold
825 UKTV style
1 C --
2 C -3 C -4 C -5 C -6 C -7 C -8 C --
Channel Type Zoom
All Channel Type Zoom
All
824 UKTV Gold
825 UKTV style
1 C --
2 C -3 C 4 C -5 C -6 C -7 C -8 C --
All Channel Type Zoom
Select Option ►Next Program
Select Option
Select Option ►Next Program
Select Option
Delete
Add to Favourite
Lock
Timer Viewing
Channel Nam e Edit
Sort
▼
Select Option
English - 18
English - 19
Setting Your Favourite Channels
You can set channels you watch frequently as Favourites.
1 Press the MENU button.
Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
Channel
Press the ▲ or ▼ button to select Channel List, then
press the ENTER button.
2 Press the ◄ button to select Added Channels.
3 Press the ▲ or ▼ button to select All Channels, then
press the ENTER button.
Shows all currently available channels.
4 Press the ▲ or ▼ button to select a channel as a Favourite
channel, then press the TOOLS button.
Added Channels
5 Press the ▲ or ▼ button to select Add to Favourite, then
press the ENTER button.
The “♥” symbol will be displayed and the channel will be
set as a Favourite.
6 To cancel your Favourite channel selection, press the
TOOLS button when a Favourite channel is selected.
Press the ▲ or ▼ button to select Delete from Favourite,
then press the ENTER button. The channel is deleted from
Favourites and the “♥” mark disappears.
Press the EXIT button to exit.
You can also Add or Delete a channel from Favourites
➢
in the Added Channels menu in the same manner.
All Favourite channels will be shown on Favourite
➢
menu.
Press the CH LIST button on the remote control to
➢
bring up the channel lists.
Channel Mode: Added Channels/Favourite Channels
−
Added Channels
Press the ▲ or ▼ button to select Added Channels,
then press the ENTER button.
−
Favourite Channels
Press the ▲ or ▼ button to select Favourite Channels,
then press the ENTER button.
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Channels
Child Lock : On
Fine Tune
Signal Information
LNA : Off
824 UKTV Gold
825 UKTV style
1 C --
2 C -3 C -4 C -5 C -6 C -7 C -8 C --
All Channel Type Zoom
Delete
Add to Favourite
Lock
Timer Viewing
Edit Channel Name
Sort
Select Option
▼
Reserving a Program (Time Viewing)
If you reserve a program you want to watch, the channel is automatically switched to the reserved
channel in the Channel List; even when you are watching another channel.
To reserve a program, set the current time rst. See page 35. Reserved chanels can only be set if
they are in the Channel List (See page 1
7).
1 Press the MENU button.
Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
Press the ▲ or ▼ button to select Channel List, then
press the ENTER button.
2 Press the ▲ or ▼ button to select a channel, then press
the TOOLS button.
3 Press the ▲ or ▼ button to select Timer Viewing, then
press the ENTER button.
The Reserve a Program (Timer Viewing) screen appears.
Press the ▲/▼/◄/► buttons to reserve a program and
4
then press the ENTER button.
Reserving a program has been completed.
Press the EXIT button to exit.
You can also reserve a program in the All Channels or
➢
Favourite menus using the same procedures.
For information on how to confirm a viewing
➢
reservation, refer to page 21. Only memorized
channels can be reserved channels.
You can set the channel, month, day, year, hour and
➢
minute directly by pressing the number buttons on the
remote control.
Mini Guide
Channel
Default Guide : Mini Guide
Channel List
Channel Mode : Added Channels
Child Lock : On
Fine Tune
Signal Information
LNA
: Off
824 UKTV Gold
Added Channels
825 UKTV style
1 C --
2 C -3 C -4 C -5 C -6 C -7 C -8 C --
All Channel Type Zoom
Timer Viewing
Antenna Channel Repeat
DTV Air 1 once
Date
01-01-2008
Move Adjust
Delete
Delete from Favourite
Lock
Timer Viewing
Edit Channel Name
Sort
▼
Select Option
Start Time
Enter Return
10:09
Press the CH LIST button on the remote control to bring
up the channel lists.
Digital Program Guide and Viewing Reservation
When a digital channel is selected, and you press the ► button,
Added Channels
the Program Guide for the channel appears. You can reserve a
program according to the procedures described above.
: A program currently being broadcast.
: A reserved program.
Continued...
English - 20
824 UKTV Gold 2007/2/3
825 UKTV style 2007/2/3
1 C -- 1:30 am
2 C -- 2:27 am
3 C -- 2:35 am
4 C -- 3:21 am
5 C -- 4:33 am
6 C -- 6:00 am
7 C -- 6:36 am
8 C --
Air Zoom Option Watch
1/22/2008
12:47 am 2.0
3:54 am KBS 2TV
6:44 am HD 1 100
7:49 am HD
8:59 am +
10:08 am
10:37 am
English - 21
Confirming a Viewing Reservation
You can view, modify or delete a reservation.
1 Press the MENU button.
Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
Press the ▲ or ▼ button to select Channel List, then
press the ENTER button.
2
Press the ◄ button to select Added Channels.
3 Press the ▲ or ▼ button to select Programmed, then
press the ENTER button.
You can view the program reservations.
Modifying a viewing reservation
4
To select a reservation item to be modied, press the ▲ or
▼ button and then press the TOOLS button.
5 Press the ENTER button to select Change Info.
6
Press the ▲/▼/◄/► buttons to change a reservation
setting and then press the ENTER button.
The reservation modication is applied.
Canceling a reservation
4
To select a reservation item to be canceled, press the ▲ or
▼ button, and then press the TOOLS button.
5
Press the ▲ or ▼ button to select Cancel Schedules,
then press the ENTER button.
6
Press the ◄ or ► button to select OK, then press the
ENTER button.
The viewing reservation has been canceled.
Press the
Programmed Menu
• Change Info: Select to change a viewing reservation.
• Cancel Schedules
• Information
• Select All/Deselect All: You can select(or Deselect)
all channel in the channel list.
EXIT button to exit.
: Select to cancel a viewing reservation.
: Select to view a viewing reservation.
Antenna
Channel
Auto Program
Channel List
Channel Mode : Added Channels
Child Lock : On
Fine Tune
Signal Strength
LNA :
824 UKTV Gold
Added Channels
825 UKTV style
1 C --
2 C -3 C -4 C -5 C -6 C -7 C -8 C --
All
Channel Type Zoom
All Channel Type Zoom
Programmed
2007/2/3
3:15 am 1 Air No Program Name
4:15 am 2 Air No Program Name
2008/2/4
2:14 am 3 Air No Program Name
2008/2/5
2:15 am 4 Air No Program Name
Air Antenna Zoom
Programmed
2007/2/3
3:15 am 1 Air NNo ProgramName
4:15 am 2 Air No Program Name
2007/2/4
2:14 am 3 Air No Program Name
2007/2/5
2:15 am 4 Air No Program Name
Air Antenna Zoom
Select Option ►Next Program
Select Option
Select Option Information
Select Option Information
Off
Change Info
Cancel Schedules
Information
Select All
Press the CH LIST button on the remote control to bring up
the channel lists.
Continued...
Assigning Names to Channels
Channel names will be assigned automatically when
channel information is broadcast. These names can be
changed, allowing you to assign new names.
Editing the Channel Name-Analog
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Channel List, then
press the ENTER button.
4 Press the TOOLS button.
5 Press the ▲ or ▼ button to select Edit Channel Name,
then press the ENTER button.
6 Press the ▲ or ▼ button to select the channel to be
assigned to a new name, then press the ENTER button.
7 Press the ▲ or ▼ button to select a letter
, a number, or
a symbol (Results in this sequence: A~Z, 0~9, +, -, *, /,
blank).
Move on to the previous or next letter by pressing the ◄ or
► button, then press the ENTER button.
8 Repeat steps 6 to 7 for each channel to be assigned to a
new name.
9 Press the EXIT button to exit.
Editing the Channel Number-Digital
1 Press the MENU button.
Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
Press the ▲ or ▼ button to select Channel List, then
press the ENTER button.
2 Select the channel number that you wish to edit by
pressing the ▲ or ▼ button repeatedly
, then press the
TOOLS button.
3 Press the ▲ or ▼ button to select Edit Channel Number,
then press the ENTER button.
Then you can edit the Channel Number pressing the ▲ or
4
▼ button repeatedly. You can also edit the channel number
by pressing the number buttons on the remote control.
Mini Guide
Channel
Default Guide : Mini Guide
Channel List
Channel Mode : Added Channels
Child Lock
: On
Fine Tune
Signal Information
LNA
: Off
824 UKTV Gold
Added Channels
825 UKTV style
1 C --
2 C -3 C -4 C -5 C -6 C -7 C -8 C --
All Channel Type Zoom
All Channel Type Zoom
Edit Channel Name
_
6
A
V
824 UKTV Gold
Added Channels
825 UKTV style
1 C --
2 C -3 C -4 C -5 C -6 C -7 C -8 C --
All Channel Type Zoom
All Channel Type Zoom
Edit Channel Number
Channel
8 0 3
Delete
Add to Favourite
Unlock
Timer Viewing
Edit Channel Name
Sort
▼
Select Option ► Next Program
Select Option
Enter ReturnMove
Delete
Add to Favourite
Unlock
Timer Viewing
Edit Channel Name
Sort
▼
Select Option ► Next Program
Select Option
Name
BBC Radio 1
Number
Character
Delete
Blank
Done
ReturnEnterMove
Added Channels
Added Channels
English - 22
English - 23
Sorting the Stored Channels
This operation allows you to change the programme
numbers of the stored channels.
This operation may be necessary after using the auto
Channel
store.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Channel List, then
press the ENTER button.
4 Press the TOOLS button.
5 Press the ▲ or ▼ button to select Sort, then press the
ENTER button.
Added Channels
6 Select the channel that you wish to move by pressing the
▲ or ▼ button, then press the ENTER button.
7 Select the number of the programme to which the channel
is to be moved by pressing the ▲ or ▼ button.
Press the ENTER button. The channel is moved to its new
position and all other channels are shifted accordingly.
8 Repeat steps 6 to 7 until you have moved all the channels
to the required programme numbers.
9 Press the EXIT button to exit.
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Channels
Child Lock : On
Fine Tune
Signal Information
LNA : Off
824 UKTV Gold
825 UKTV style
1 C --
2 C -3 C -4 C -5 C -6 C -7 C -8 C --
All Channel Type Zoom
802 abc1
803 BBC Radio 1
804 BBC Radio 2
805 BBC Radio 3
806 BBC Radio 4
807 BBC World
Move
Delete
Add to Favourite
Lock
Timer Viewing
Edit Channel Name
Sort
Select Option
Sort
▼
▼
ReturnEnter
Selecting and Deselecting All Channels
1 Press the MENU button.
Press the ▲ or ▼ button to select
Channel, then press the
ENTER button.
Press the ▲ or ▼ button to select
press the
Press the ▲ or ▼ button to select the Channel to be
2
ENTER button.
assigned a new name, then press the
Channel List, then
TOOLS button.
3 Press the ▲ or ▼ button to select Select All or Deselect
All
, then press the ENTER button.
You can select(or Deselect) all channel in the channel
➢
list.
The ✓ mark appears to the left of the selected channels.
➢
824 UKTV Gold
Chaînes ajoutées
825 UKTV style
1 C --
2 C - 3 C - 4 C --
✓
✓
5 C - 6 C - 7 C - 8 C --
Tous Type de canal Zoom
Storing Channels in Memory (Auto Store)
1 Press the MENU button.
Press the ▲ or ▼ button to select
Channel, then press the
ENTER button.
Press the ▲ or ▼ button to select
press the
ENTER button.
Channel List, then
2 Press the ▲ or ▼ button to select the channel to be
assigned a new name, then press the
TOOLS button.
3 Press the ▲ or ▼ button to select Auto Store, then press
the
ENTER button.
For further details on setting up options, refer to page
➢
14.
When there is a locked channel by Child Lock setting,
➢
PIN input screen appears.(refer to page 25)
824 UKTV Gold
Added Channels
825 UKTV style
1 C --
2 C -3 C -4 C -5 C -6 C -7 C -8 C --
All Channel Type Zoom
All Channel Type Zoom
Setting the Channel Mode
♥
▲
Lock
Timer Viewing
Edit Channel Name
Sort
Select All
Auto Store
Sélection Option
▲
Lock
Timer Viewing
Edit Channel Name
Sort
Select All
Auto Store
Select Option ► Next Program
Select Option
You can display either the added channels list or the
favourite channels list when the CH LIST button on the
remote control is pressed.
1 Press the MENU button.
Press the ▲ or ▼ button to select
Channel, then press the
ENTER button.
Press the ▲ or ▼ button to select
press the
ENTER button.
Channel Mode, then
2 Press the ▲ or ▼ button to select Added Channels or
Favourite Channels
, then press the ENTER button.
3 Press the EXIT button to exit.
English - 24
Default Guide : Mini Guide
Channel
Channel List
Channel Mode
Child Lock : On
Fine Tune
Signal Information
LNA : Off
Default Guide : Mini Guide
Channel
Channel List
Channel Mode
Child Lock : On
Fine Tune
Signal Information
LNA : Off
: Added Channels
Added Channels
: Added Channels
Favourite Channels
English - 25
Locking Channels
This feature allows you to prevent unauthorized users, such as children, from watching unsuitable
programmes by muting out video and audio. Child Lock cannot be released using the buttons on
the side. Only the remote control can release the Child Lock setting, so keep the remote control
away from children.
Locking channels
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Child Lock, then press
the
ENTER button.
Enter your 4 digit
The default PIN number of a new TV set is “0-0-0-0”.
➢
If you want to change PIN number, refer to page 35.
➢
4 Press the ▲ or ▼ button to select On, then press the
ENTER button.
PIN number.
5 Press the ▲ or ▼ button to select Channel List, then
press the
ENTER button.
6 Press the ▲ or ▼ button to select a channel to be locked,
then press the
The symbol will be displayed and the channel will
➢
be locked.
TOOLS button.
Unlocking channels
7 Press the ▲ or ▼ button to select Unlock, then press the
ENTER button.
Enter your 4 digit PIN number.
The channel is unlocked and the mark also
➢
disappears.
The default PIN number of a new TV set is “0-0-0-0”.
➢
Channel
Added Channels
Channel List
Channel Mode : Added Channels
Child Lock
Fine Tune
Signal Information
LNA : Off
Enter PIN
* ***
824 UKTV Gold
825 UKTV style
1 C --
2 C --
3 C --
4 C --
5 C --
6 C --
7 C --
8 C --
All Channel Type Zoom
Child Lock
0~9
Enter PIN
Select Option
: On
►
Delete
Add to Favourite
Lock
Timer Viewing
Channel Nam e Edit
Sort
▼
Return
Fine Tuning Analog Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
2 Press the ▲ or ▼ button to select Fine Tune, then press
the ENTER button.
3 Press the ◄ or ► button to adjust the fine tuning.
To store the fine tuning setting in the TV’s memory, press
the ENTER button.
If you do not store the fine-tuned channel in memory,
➢
adjustments are not saved.
4 T
o reset the fine tuning setting, press the ▼ button to
select Reset, then press the ENTER button.
Press the EXIT button to exit.
Only analog TV channels can be fine tuned.
➢
“ * ” will appear next to the number of fine-tuned
➢
channels.
Channel
Channel Mode : Added Channels
Child Lock
Fine Tune ►
Signal Information
LNA : Off
Fine Tune
Air 6 * Fine Tune
Reset
Adjust
: On
Enter
+5
Return
Loading...