Samsung PS51F8500SZXZT User manual

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) www.samsung.com

BELGIUM 02-201-24-18 www.samsung.com/be (Dutch)

BOSNIA 051 331 999 www.samsung.com

BULGARIA 07001 33 11 , share cost tariff www.samsung.com/bg

CROATIA 062 SAMSUNG (062 726 786) www.samsung.com/hr

CZECH 800 - SAMSUNG (800-726786) www.samsung.com

DENMARK 70 70 19 70 www.samsung.com

FINLAND 030-6227 515 www.samsung.com

FRANCE 01 48 63 00 00 www.samsung.com/fr

GERMANY 0180 6 SAMSUNG bzw.

CYPRUS 8009 4000 only from landline www.samsung.com/gr

GREECE 80111-SAMSUNG (80111 726 7864) only from land line

HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.com/hu

ITALIA 800-SAMSUNG (726-7864) www.samsung.com

LUXEMBURG 261 03 710 www.samsung.com

MONTENEGRO 020 405 888 www.samsung.com

NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com

NORWAY 815 56480 www.samsung.com

POLAND

PORTUGAL 808 20-SAMSUNG (808 20 7267) www.samsung.com

ROMANIA 08008 SAMSUNG (08008 726 7864)

SERBIA 011 321 6899 www.samsung.com/rs

SLOVAKIA 0800 - SAMSUNG (0800-726 786) www.samsung.com

SPAIN 902172678 www.samsung.com

SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com

SWITZERLAND 0848 - SAMSUNG(7267864, CHF 0.08/min) www.samsung.com/ch (German)

U.K 0330 SAMSUNG (7267864) www.samsung.com

EIRE 0818 717100 www.samsung.com

LITHUANIA 8-800-77777 www.samsung.com/lt

LATVIA 8000-7267 www.samsung.com/lv

ESTONIA 800-7267 www.samsung.com/ee

TURKEY 444 77 11 www.samsung.com

Customer Care Centre

Samsung Electronics Czech and Slovak, s.r.o. V Parku 2343/24, 148 00 - Praha 4

0180 6 7267864* (*0,20 €/Anruf aus dem dt. Festnetz, aus dem Mobilfunk

max. 0,60 €/Anruf)

(+30) 210 6897691 from mobile and land line

0 801-172-678* lub +48 22 607-93-33 **

*(całkowity koszt połączenia jak za 1 impuls według taryfy operatora) ** (koszt połączenia według taryfy operatora)

TOLL FREE No.

Web Site

www.samsung.com/be_fr (French)

www.samsung.com

www.samsung.com/gr

www.samsung.com/pl

www.samsung.com/ro

www.samsung.com/ch_fr (French)

Plasma TV

user manual

e-Manual

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model _____________Serial No. _____________

0_BN68-04828H-Cover_ENG.indd 1 2013-11-05  1:16:50

BN68-04828H-04

Important Safety Instructions

Warning! Important Safety Instructions

(Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.)

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.

− Do not cover this apparatus in a conﬁned space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

− Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.

− Do not place a water containing vessel(vases etc.) on this apparatus, as this can result in a risk of ﬁre or electric shock.

• Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately. Make sure to pull out the power cord from the outlet before cleaning.

• This apparatus use batteries. In your community there might be regulations that require you to dispose of these batteries properly under environmental considerations. Please contact your local authorities for disposal or recycling information.

• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in ﬁre or electric shock.

• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular

attention to cords at plug end, adaptors and the point where they exit from the appliance.

• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local electrical supply.

• Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger of electric shock.

• To avoid electric shock, never touch the inside of this apparatus. Only a qualiﬁed technician should open this apparatus.

• Make sure to plug the power cord in until it is ﬁrmly inserted. When removing the power cord, make sure to hold the power plug when pulling the

plug from the outlet. Do not touch the power cord with wet hands.

• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service centre.

• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially when children, elderly or disabled people will be left alone in the house).

− Accumulated dust can cause an electric shock, an electric leakage or a ﬁre by causing the power cord to generate sparks and heat or the

insulation to deteriorate.

• Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures, high humidity, chemical substances and where it operates for 24 hours such as the aerial port, the train station etc.

• Failure to do so may cause serious damage to your set.

• Use only a properly grounded plug and receptacle.

− An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

• Do not allow children to hang onto the product.

• Store the accessories (battery, etc.) in a location safely out of the reach of children.

• Do not install the product in an unstable location such as a shaky self, a slanted ﬂoor or a location exposed to vibration.

• Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a service centre.

• Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol,

thinners, insecticide, aerial freshener, lubricant or detergent. This may damage the appearance or erase the printing on the product.

• Apparatus shall not be exposed to dripping or splashing.

• Do not dispose of batteries in a ﬁre.

• Do not short circuit, disassemble or overheat the batteries.

• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol alerts you that important literature concerning operation and maintenance has been included with this product.

English - 2

[PF8500-ZT]BN68-04828H-04L03.indb 2 2013-10-31  4:01:29

Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product appearance. Product design and speciﬁcations may change without notice.

CIS languages (Russian, Ukrainian, Kazakhs) are not available for this product, since this is manufactured for customers in EU region.

Features for your new TV

• 3D: This new feature enables you to view 3D content.

• SMART HUB:

This TV features Smart Hub, a multi-purpose entertainment and family centre. With Smart Hub, users can surf the web, download applications, and stay in touch with family and friends through social networking services. In addition, you can enjoy photo, video, and music ﬁles stored on external storage devices.

Press the Social: Watch the latest YouTube videos and you and your friends' video posts on Facebook and Twitter. You can

also make video calls to friends by the TV camera.

Apps: Download and install applications such as Web Browser. On TV: Check a listing of programmes that are currently aerialing and are scheduled to aerial. (Depending on the

country) Films and TV Shows: Purchase and watch movies and series without a separate external device. (Depending on

the country) Photos, Videos & Music: Play back photo, video, and music ﬁles from an external storage device.

™

button to launch Smart Hub. Choose a service using the icons displayed in the top part of the screen.

English

• Anynet+ (HDMI-CEC): This allows you to control all connected Samsung devices that support Anynet+ with your

Samsung TV’s remote.

• e-Manual: Provides a detailed, on-screen user's manual built into your TV. (page 13)

• SMART Interaction: Using this function, you can access and control menu options and functions using motions.

• Device Manager: Use the TV features with a USB or Bluetooth keyboard and mouse.

• MHL & Screen Mirroring: Displays mobile device screens on your TV using a wired or wireless connection.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government ofﬁce, for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product (Applicable in countries with separate collection systems)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

English - 3

[PF8500-ZT]BN68-04828H-04L03.indb 3 2013-10-31  4:01:29

Accessories

Please make sure the following items are included with your TV. If any items are missing, contact your dealer.

✎

The items’ colours and shapes may vary depending on the models.

✎

Cables not included in the package contents can be purchased separately.

✎

Check that there is no accessory hidden behind packing materials when you open the box.

✎

CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET

[

• Smart Touch Control & Batteries (AAA x 2) • Power Cord

• Remote Control & Batteries (AAA x 2) • Samsung 3D Active Glasses

• User Manual • Warranty Card (Not available in some locations)

• Regulatory Guide

Scart Adapter AV Adapter Component Adapter CI Card Adapter IR Extender Cable

Blanking Bracket x 2 Ferrite Core (3 EA) Rubber packing

Ferrite Core for Power Cord: The ferrite cores are used to shield the cables from

✎

Wireless Keyboard

(Sold Separately)

interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure.

• A Maximum distance between the ferrite core and the end of the cord inserted in the TV: 3/4 inches

Ferrite Core : The ferrite cores are used to shield the cables from interference.

✎

When connecting a cable, open the ferrite core and clip it around the cable near the plug as shown in the figure.

Use Cat 7 cable for LAN cable.

✎

Warning: Screens can be damaged from direct pressure when handled incorrectly. We recommend

Don't Touch This Screen!

lifting the TV by the edges, as shown.

Cable manager

Power Cord

AV / Component Adapter,

IR Extender Cable

LAN Cable

(sold separately)

English - 4

[PF8500-ZT]BN68-04828H-04L03.indb 4 2013-10-31  4:01:31

Basic Features

Using the Smart Touch Control

You can use the MIC to give Voice Recognition commands. Simply press the VOICE

Voice Recognition function can be affected by unclear pronunciation, voice level, or surrounding noise.

✎

Turns the TV on and off.

Displays and selects the available video

Cuts off the sound

Press and hold this button

to select Audio Description

and Subtitle. (Depending on

Toggles this button between Recommended

Returns to the previous menu. Press and

hold this button to exit all currently running

temporarily.

the country or region.)

Adjusts the volume.

sources.

and Search.

applications.

button.

Turn on and off the satellite or cable set-top box connected to the TV. For this, the Smart Touch Control must be conﬁ gured as a universal remote control.

VOICE

Take your voice command and enter a text using your voice.

Changes channels.

Displays a virtual remote panel on the screen. See the e-Manual chapter, Controlling TV >

Using the Virtual Remote Control.

Press and hold the MORE button to select a desired function (e.g. MENU (

TOOLS (

TouchPad

• Drag on the touchpad to move the focus

• Press the touchpad to run, activate, or

• Press and hold the touchpad to display

The colour buttons work differently, depending on the function that the TV is currently performing.

Press and hold the TV to view information about the current programme.

), INFO (`), etc.) easily.

on the screen.

select the highlighted item.

the Channel List.

{

button while watching

English

Brings up Smart Hub applications. See the

e-Manual chapter, Smart TV Features >

To exit an application that is running,

✎

press the

Smart Hub.

™

button.

View each digital channel's programming schedule, including showtimes. In addition, sets a Schedule Viewing or Schedule Recording to press the touchpad on the programme entry scheduled to air later.

Connecting to the TV

In order to operate the TV using a Smart Touch Control, you must ﬁ rst pair it to the TV via Bluetooth. However, the Smart Touch Control is only available for the paired Samsung TV.

We recommend to use the Smart Touch Control in less than 6m. A usable distance may differ depending on the wireless

✎

environmental conditions.

1. When the TV is off, point the Smart Touch Control at the remote control receiver of the TV and press the TV button for the ﬁ rst

pairing. Only this buttons sends an IR signal. The remote control receiver's location may vary depending on the model.

2. A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attempt to connect to the Smart

Touch Control automatically.

Reconnecting the Smart Touch Control

If the Smart Touch Control stops operating or works abnormally, replace the battery as this may be caused by insufﬁ cient battery power. If the problem persists, press the PAIRING button on the Smart Touch Control to restore pairing with the TV. The button cannot be accessed without removing the Smart Touch Control's battery cover. Within a distance between 30cm to 4m, point the Smart Touch Control to the TV receiver and press the PAIRING button. When pairing is complete, the pairing image displays at the bottom left of the TV screen.

English - 5

[PF8500-ZT]BN68-04828H-04L03.indb 5 2013-10-31  4:01:31

Battery Low Alarm

If the battery becomes and blanks low while using the Smart Touch Control, the following alarm window blinks and appears at the bottom left of the screen. If the alarm window pops up, replace the batteries of the Smart Touch Control. Use alkaline batteries for longer usage.

Inserting the Batteries (AAA X 2)

1. Slightly lift the battery cover using a plastic card. Next,

pull on the cover’s notch with a ﬁngernail to remove the cover completely.

Check the location of the battery cover groove.

✎

The groove's location may vary depending on the type of Smart Touch Control is provided with the product.

2. Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.

3. Align the battery cover with the back of the remote control and press down along the edges until it is cleanly attached to the remote control.

Using the Touchpad

Use the touchpad to perform various commands. Navigate to Tutorial (Screen Menu > System > Device Manager > Smart Touch Control Settings > Tutorial) to view an on-screen guide to using the Smart Touch Control.

Dragging Press

Drag on the touchpad in the desired direction.

Move the focus or the pointer in the direction the ﬁnger is dragging.

Press on the touchpad. This selects the focused item. When watching TV,

pressing and holding the touchpad displays the channel list. On some apps,

pressing and holding the touchpad for over 2 seconds displays a list of functions

available for the app.

Changing Channels by Entering Numbers

While watching TV, tap on the protruding line on the left or right edge of the touchpad to bring up the numerical input window on the screen. Use your ﬁnger to enter the number for the channel you want to watch. The recognised number is displayed on the screen and the TV switches to the corresponding channel. See the e-Manual chapter,

Controlling TV > Touchpad.

Numerical Input Guide

Refer to the diagrams below when entering numerical values. The TV may not recognise your entries if you do not follow the sequences shown below.

English - 6

[PF8500-ZT]BN68-04828H-04L03.indb 6 2013-10-31  4:01:32

Show Status and Notiﬁcation Banner

Press the MORE button on the Smart Touch Control and then select STATUS on the virtual remote panel to display the status and notiﬁcation banner at the top of the screen.

Recommendations

Press the RECOMM. / SEARCH button and then select Recommended from the list displayed at the bottom of the screen. Select a programme that is currently airing to jump to the corresponding channel or a programme that is scheduled to air to set up a Schedule Viewing or Schedule Recording setting. Select an application to launch. Samsung Apps will launch if the selected application is not installed on the TV.

History

Press the RECOMM. / SEARCH button and then select History from the list displayed at the bottom of the screen. This displays an interactive list of recently accessed channels, media content and applications.

The RECOMM. / SEARCH button may function as a History recall feature, depending on your country or region.

✎

Deleting History Data

You can delete the history information about recently viewed channels, content and applications.

Searching

Press the RECOMM. / SEARCH button on the Smart Touch Control. The list appears at the bottom of the screen. Press the

RECOMM. / SEARCH button again. The keypad will appear on the screen. Enter search criteria to search not only many

apps and their contents on the TV but also the Web. This button toggles between Recommended and Search.

English

Adjusting the Touchpad

Users can adjust the sensitivity of the Smart Touch Control’s touchpad. Set Touch Sensitivity to adjust sensitivity and make it more convenient to use.

Using the Virtual Remote Control

Press MORE button to display the virtual remote panel on the screen. The virtual remote panel consists of a number panel, a playback control panel, and a quick access panel. Use the touchpad to select numbers and buttons.

The displayed virtual remote panel on the TV screen may differ depending on the country.

✎

Changing the Virtual Remote Panel

Choose the number panel, playback control panel, or quick access panel as the panel to be shown on the screen. Use the touchpad to keep moving the focus left or right. The panel changes when the focus is moved beyond the leftmost or

rightmost edge.

Use left / right scroll function on the touchpad to change the panel easily.

✎

Using the Number Panel

Use the number panel to enter numbers on a keypad screen or webpage or to change the channel while watching TV. Changing the channel using the number pad leaves a record, allowing you to easily return to previous channels.

Using the Playback Control Panel

Use the playback control panel to pause, rewind, fast forward, skip to the next ﬁle, and much more while enjoying media content.

Using the Quick Access Panel

Quickly access the INFO, MENU and e-Manual buttons. However, the availability of buttons vary depending on the operating mode of the Smart Touch Control unit (with the TV only, as a universal remote, etc.).

English - 7

[PF8500-ZT]BN68-04828H-04L03.indb 7 2013-10-31  4:01:32

Using the Remote Control

Learn where the function buttons are on your remote. Especially note these: SOURCE, MUTE,

MENU, TOOLS,

This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually

✎

, INFO, CH LIST, RETURN, GUIDE and EXIT.

Y, < P >

impaired persons. Your TV also comes with a Smart Touch Control. For information about the Smart Touch Control, refer to the

✎

e-Manual.

Turns the TV on and off.

Gives direct access to channels.

Alternately select Teletext ON Double, Mix or OFF.

Adjusts the volume.

Displays channel lists on the screen.

Opens the OSD (Menu).

,.;@ abc def

ghi jklmno

pqrs

tuv

TEXT

TTX/MIX

MUTE

CH LIST

SMART

HUB

SOURCE

wxyz

PRE-CH

GUIDE

Displays and selects the available video sources.

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Brings up Smart Hub applications. See the e-Manual chapter, Smart TV Features > Smart Hub.

Quickly selects frequently used functions.

Moves the cursor, selects the on-screen menu

items, and changes the values seen on the TV's

menu.

Returns to the previous menu.

Use these buttons according to the directions on

the TV's screen.

Use these buttons in a speciﬁc feature. Use these

buttons according to the directions on the TV's

screen.

TOOLS

BACK

RETURN

E-MANUAL

English - 8

INFO

EXIT

BCD

Displays the EPG (Electronic Programme Guide).

Displays information on the TV screen.

Exits the menu.

E-MANUAL: Displays the e-Manual.

: Turns the 3D function on or off. See e-Manual

chapter TV Viewing > 3D TV

: Use this button when using data broadcast

service. This function is available when Auto Run Data Service is set to Off.

: Stop.

[PF8500-ZT]BN68-04828H-04L03.indb 8 2013-10-31  4:01:32

Installing batteries (Battery size: AAA)







Match the polarity of the batteries to the symbols in the battery compartment.

NOTE

✎

− Use the remote control within 23 feet of the TV.

− Bright light may affect the performance of the remote control. Avoid using when near special ﬂuorescent lights

or neon signs.

− The colour and shape may vary depending on the model.

Turning on the TV

English

Turn on the TV using the P button on the remote control or TV panel.

The product colour and shape may vary depending on the model.

✎

The TV’s Controller, a small joy stick like button on the rear left side of the TV, lets you control the TV without the

✎

remote control.

Camera

Function menu

TV Controller

The image is drawn by facing the front side of the TV.

Remote control sensor

When you use the Smart Touch Control, a standby LED does not work (except

button).



[PF8500-ZT]BN68-04828H-04L03.indb 9 2013-10-31  4:01:33

English - 9

Built-in TV Camera and Microphone

주의

This TV features a built-in TV camera that can be used for the Motion Control, Voice Recognition (built-in microphone), and Face Recognition features. You can also use the knob for camera's angle adjustment to change the camera's viewing angle.

From the Top From Behind

Microphone

Knob for camera's angle adjustment

Lens

Microphone

Extending the TV Camera

In order to use the TV camera, you must ﬁrst extend it. Gently push the camera in without touching the lens until you hear a click.

Retracting the Camera

If you are not using the TV camera, keep it retracted inside the TV. The Motion Control and Face Recognition features cannot be used while the TV camera is in the retracted state, but Voice Recognition will still be available. Gently push the camera in without touching the lens until you hear a click.

Do not touch the lens while operating the TV camera. Leave ﬁngerprints that may affect the image quality. If the lens gets dirty, clean it using a soft piece of cloth.

English - 10

[PF8500-ZT]BN68-04828H-04L03.indb 10 2013-10-31  4:01:35

Universal Remote Setup

This TV has a universal remote control feature that lets you control cable boxes, Blu-ray players, home theatres, and other third-party external devices connected to the TV using the TV's remote control.

5 cm

Plug the cable into the TV IR connector and then point the transmitter at the other end of the cable towards the external device's remote panel receiver. However, there can' be any obstacles between the IR extension cable and the external device. The presence of an obstacle will interfere with the transmission of the remote control signal.

Add the External Device

1. Turn on the external device you wish to set up universal remote function for and then press SOURCE to bring up the Source screen.

2. Select Universal remote setup from the top of the screen. This initiates the universal remote setup process.

3. Follow the on-screen instruction and set up the universal remote control. If it does not work, set up the remote

control by entering the model number manually.

English

SETUP

The initial setup dialog appears when the TV is ﬁrst activated. Follow the on-screen instructions to ﬁnish the initial setup process, including menu language choice, channel scan, network connection, and more. At each step, either make a choice or skip the step. Users can manually perform this process at a later time under the Screen Menu > System > Setup menu.

If you connect any device to HDMI1 before starting the installation, the Channel Source will be changed to

✎

Set-top box automatically. If you do not want to select Set-top box, please select Aerial.

✎

Password Change

Screen Menu > System > Change PIN Change the TV's password.

1. Run Change PIN and then enter the current password in the password ﬁeld. The default password is “1-1-1-1”.

2. Enter a new password and then enter it again to conﬁrm it. The password change is complete.

If you forget the PIN code, press the buttons in the following sequence which resets the PIN to “1-1-1-1”:

✎

For Standard Remote Control: In Standby mode: MUTE → 8 → 2 → 4 → POWER (On) For Smart Touch Control: When the TV turnes on: MUTE → Volume up → RETURN → Volume down →

RETURN → Volume up → RETURN

English - 11

[PF8500-ZT]BN68-04828H-04L03.indb 11 2013-10-31  4:01:35

Switching Between Video

Connecting to a COMMON

Sources

Press SOURCE button to switch between devices connected to the TV.

For example, to switch to a game console connected to the second HDMI connector, press SOURCE button. From the Source list, select HDMI2. The connector names may vary depending on the product. Select Tools button at the upper-right corner of the screen to access the following functions.

• Anynet+ (HDMI-CEC)

A list appears showing Anynet+ compatible ones of external devices connected to the TV.

This function is only available Anynet+ (HDMI-

✎

CEC) function set to On.

• Edit Name

You can rename devices connected to the TV to more easily identify external sources.

With a computer connected to the TV's HDMI (DVI) port via an HDMI cable, for example, you can change Edit Name to PC.

With a computer connected to the TV's HDMI (DVI) port via an HDMI-to-DVI cable, for example, you can change Edit Name to DVI PC.

With an AV device connected to the TV's HDMI (DVI) port via an HDMI-to-DVI cable, for example, you can change Edit Name to DVI Devices.

• Information

View detailed information about the connected devices.

• Disconnect USB Device

Remove the USB device from the list safely. This function is only available when the USB device selected.

Universal remote setup

To add a new external device to control it with the Smart Touch Control, press the SOURCE button and select Universal remote setup on the top right of the screen.

Using the universal remote control, users can control external devices connected to the TV, such as a settop box, Blu-ray player, and AV receiver.

INTERFACE slot (Your TV viewing Card Slot)

Turn the TV off to connect or disconnect a CI card

✎

or CI card adapter.

Attaching the CI Card Adapter

TV Rear

Attach the adapter as shown above.

To install the CI CARD Adapter, please remove the

✎

sticker attached to the TV.

To connect the CI CARD Adapter, follow these steps.

We recommend attaching the adapter before

✎

installing the wall mount, or inserting the “CI or CI+ CA RD”.

1. Insert the CI CARD Adapter into the two holes on the

product 1.

Please find two holes on the rear of the TV,

✎

beside the COMMON INTERFACE port.

2. Connect the CI CARD Adapter into the COMMON

INTERFACE port on the product 2.

3. Insert the “CI or CI+ CARD”.

We recommend that you insert the CI card before you mount the TV on a wall. It may be difﬁcult to insert after mounting. Insert the card after attaching the CI Card Adapter on TV. It is difﬁcult to attach the module if you insert the card before attaching.

Using the “CI or CI+ CARD”

• If you don’t insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”.

English - 12

[PF8500-ZT]BN68-04828H-04L03.indb 12 2013-10-31  4:01:36

• The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

• When the conﬁguration of channel information has ﬁnished, the message “Updating Completed” is displayed, indicating the channel list is updated.

NOTE

✎

• You must obtain a “CI or CI+ CARD” from a local cable service provider.

• When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it.

• Insert the “CI or CI+ CARD” in the direction marked on the card.

• The location of the COMMON INTERFACE slot may be different depending on the model.

• “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.

• If you have any problems, please contact a service provider.

• Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or will not be seen.

The Evolution Kit Slot

Viewing the e-Manual

The embedded e-Manual contains information about your TV's key features.

This TV has a built-in user guide. To read it, use one of the following methods:

• Open the Support menu and choose e-Manual (Troubleshooting).

• Press the E-MANUAL button on the standard remote control.

• Press the MORE button on the Smart Touch Control to display control buttons on the screen. Flick the touchpad until e-Manual appears and select it.

Words in blue refer to screen menu options and

✎

words in light blue refer to remote control buttons. A printable version of this guide is also available at

✎

www.samsung.com/support.

Scrolling a Page

To scroll a page, use of one of the following methods:

• Press the right edge of the screen.

• Drag or ﬂick up or down from either edge of the touchpad.

• Place the focus on the edge of the screen, drag or ﬂick up or down on the touchpad.

or button on the scroll bar at the

or button at the right

English

(Kit Sold Separately)

TV Rear

Attaching the Evolution Kit to your Samsung TV upgrades the TV’s hardware and software without your needing to purchase a new TV. With the Evolution Kit, you can keep your TV updated with the latest features and services provided by Samsung Electronics.

The Evolution Kit is sold separately. When users

✎

purchase an Evolution Kit released in 2014 or later, the user's TV can be upgraded to match the software version of the Evolution Kit. However, an Evolution Kit may not be available, depending on the product.

The colour and design of the Evolution Kit may vary

✎

depending on the model.

Using the Top Icons

Use the Back, Forward, and Opened page icons on the top left of the screen to navigate through pages. These icons are available when two or more pages are passed.

Returning to the Home Page

To return to the home page, press the a button or select

on the top right of the screen.

Searching the Index

Press the b button or select on the top right of the screen to display the index. Select a term to display the page containing the term.

Searching Pages

Press the { button or select on the top of the screen to access the search screen. Enter a search phrase and select Done. Select an item from the search results list to navigate to the relevant page.

English - 13

[PF8500-ZT]BN68-04828H-04L03.indb 13 2013-10-31  4:01:37

Network Conﬁguration

Closing the e-Manual

To close the e-Manual, press and hold the RETURN button or select at the upper-right corner of the screen or press EXIT button.

Jumping to a Menu Item

To directly jump to the menu item that is described in the current section, select a menu item directly to the related section in the e-Manual. If you want to read an e-Manual entry on a speciﬁc screen menu feature, press the virtual remote panel's or the regular remote's E-MANUAL button to load the corresponding e-Manual page.

This feature may not be available, depending on the menu.

✎

Try Now

. It is possible to jump from

Updating the e-Manual

Open the Smart Hub and select Apps, and then select More Apps. The e-Manual can be updated in the same way with an application update.

On the More Apps screen, select Apps to update, and then select e-Manual from the list. The e-Manual starts updating to the latest version. However, Apps to update appears on the screen only when the update is required.

Connecting to a Network

Connecting the Smart TV to a network gives you access to online services such as the Smart Hub, as well as software updates.

Network Connection - Wireless

Connect the TV to the Internet using a standard router or modem.

Wireless IP Router or Modem

that has a DHCP Server

The LAN Port on the Wall

LAN Cable (Not Supplied)

Wireless Network Precautions

• This Smart TV supports the IEEE 802.11a/b/g /n communication protocols. Samsung recommends using IEEE

802.11n. Otherwise when you play video over a network connection, the video may not play smoothly.

• To use a wireless network, the TV must be connected to a wireless router or modem. If the wireless router supports DHCP, the TV can use a DHCP or static IP address to connect to the wireless network.

• Select a channel that is not currently in use for the wireless router. If the channel set for the wireless router is currently being used by another device, the result is usually interference and/or a communications failure.

• Most wireless networks have an optional security system. To enable a wireless network's security system, you need to create a security key using characters and numbers. This security key is then needed to connect to the wireless network.

English - 14

[PF8500-ZT]BN68-04828H-04L03.indb 14 2013-10-31  4:01:37

Network Security Protocols

The TV only supports the following wireless network security protocols and is unable to connect to non-certiﬁed wireless routers:

• Authentication Modes: WEP, WPAPSK, WPA2PSK

• Encryption Types: WEP, TKIP, AES

If the wireless router has been set to Pure High-throughput (Greenﬁeld) 802.11n mode and the Encryption Type to WEP or TKIP, Samsung Smart TVs will not support the connection in compliance with the new Wi-Fi certiﬁcation speciﬁcations.

If the wireless router supports WPS (Wi-Fi Protected Setup), it is possible to connect to the network using PBC (Push Button Conﬁguration) or a PIN (Personal Identiﬁcation Number). WPS automatically conﬁgures the SSID and WPA key settings.

Network Connection - Wired

There are three main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated starting below:

English

The Modem

Port on the Wall

The Modem

Port on the Wall

The LAN Port

on the Wall

External Modem

(ADSL / VDSL / Cable TV)

Modem Cable (Not Supplied) LAN Cable (Not Supplied)

External Modem

(ADSL / VDSL / Cable TV)

Modem Cable (Not Supplied)

LAN Cable

(Not Supplied)

IP Router that has a

DHCP Server

LAN Cable

(Not Supplied)

TV Rear Panel

LAN Cable (Not Supplied)

The TV does not support network speeds less than or equal to 10Mbps.

✎

Use Cat 7 cable for the connection.

✎

English - 15

[PF8500-ZT]BN68-04828H-04L03.indb 15 2013-10-31  4:01:38

3D Basics

3D Active Glasses

Features

Pairing 3D Active Glasses

Samsung's SSG-5100GB 3D glasses enable you to view 3D images on your 3D TV. The Samsung 3D glasses communicate with Samsung 3D TVs via the 2.4GHz RF band.

The Samsung 3D glasses are only compatible with

✎

Samsung D, E, and F series 3D TV's that were released in 2011, 2012, and 2013. These 3D glasses cannot be connected to other Bluetooth devices.

Parts

LED Indicator & Power Button

Battery Cover

Liquid crystal shutter

For details on how to attach the glasses' temples and how to pair the glasses with the TV, refer to the separate 3D glasses manual.

Replacing the Battery

If the red LED blinks every two seconds continually, replace the battery with a new one.

Insert the "+" side of the battery into the side marked

✎

with "+" in the battery compartment. To check the remaining battery capacity, refer to the

✎

pairing section in this manual.

What is Pairing? Pairing is the process of connecting

✎

3D glasses and a 3D TV so that the two devices can exchange data.

Ensure your Samsung TV and 3D glasses are no

✎

farther than 19.5 in (50 cm) apart from each other while pairing is in progress.

• Turning the glasses on

Press the power button brieﬂy. The green LED is turned on for 3 seconds. (Make sure that 3D is activated on the TV before using the 3D glasses.)

• Turning the glasses off

Press the power button brieﬂy. The red LED is turned on for 3 seconds.

• Performing the pairing process

Turn the TV on and let it power up completely. Press and hold the Power button on the glasses. The green and the red LEDs blink alternately for 2 seconds.

• Operating range

Recommended pairing distance

2~6m

50 cm

Pull the battery

cover downward

Replace the battery

Open the battery

cover

Push the battery cover downward

Remove the

battery

Close the battery

cover

Recommended viewing distance

Recommended viewing distance 2~6m (6.5 to 19.5 ft) Recommended pairing distance 50 cm or less (19.5 in)

Once the 3D glasses are paired, the remaining

✎

battery capacity is displayed on the TV screen. (This feature only applies to Samsung F series 3D TVs and 3D glasses that have been available since 2013.)

If you keep trying to pair the glasses and the TV, the

✎

battery level will decrease significantly. However, the battery level will recover to a certain degree in about a minute.

English - 16

[PF8500-ZT]BN68-04828H-04L03.indb 16 2013-10-31  4:01:39

The working distance depends on the existence

✎

of obstacles (a person, metal, walls, etc.) between the glasses and the TV and the strength of the Bluetooth signal.

Turn off the 3D glasses while they are not in use.

✎

If you leave the 3D glasses on, the battery lifespan decreases.

Pairing steps

1. Turn on the TV, and then move the glasses within

19.5 inches of the TV.

2. Press the power button on the 3D glasses brieﬂy.

The 3D glasses will power on and pairing will start.

3. The message “3D glasses are connected to TV.” will

be displayed on the TV screen when the pairing is successfully completed.

• If pairing fails, the 3D glasses will power off.

• If the ﬁrst attempt to pair fails, power the TV off and on again and perform step 2.

• How to pair again: Press the power button on the 3D glasses for more than 1 second.

Troubleshooting

Pairing is needed again in the following situations:

• If the 3D glasses do not function, even when the power button is pressed, especially with a 3D TV after a repair.

• If you want to play 3D content on another Samsung 3D TV model that belongs to the D, E, or F series released in 2011 through 2013. You must pair the glasses with the other TV.

Watching 3D Video

Some 3D modes may not be available depending on the format of the image source.

To watch in 3D, you must wear 3D Active Glasses and turn the glasses on by pressing the power button.

1. Go to the 3D screen. (Picture > 3D)

2. Select the 3D Mode. The 3D Mode screen appears.

3. Set the 3D Mode of the image you want to view.

English

If you encounter... Try this...

Replace the battery.

My 3D glasses do not work.

The LED keeps blinking The battery is dead. Replace the battery.

The 3D glasses should be close to the TV. Make sure that the distance between the TV and your 3D glasses is less than 19.5 feet (6m) in a straight line.

Check the 3D function settings of your TV.

Speciﬁcations (Model Number: SSG-5100GB )

Optics

Weight Glasses 21.5g/.76 oz. (including the battery: 24.0±0.5g/.85.±.018oz. ) Power Glasses One 3V lithium/manganese dioxide battery 3V(CR2025)

Power consumption

Operating conditions

Product speciﬁcations may be changed without notice in order to enhance product performance.

The continuous operating time may differ depending on the wireless communication environment and usage

✎

conditions.

Shutters Liquid crystal Transmittance 36±2% Recommended

operating distance

Glasses 0.85mA (Average)

Battery

Operating temperature 50 °F ~ 104 °F (10°C ~ 40°C) Custody temperature -4 °F ~ 113 °F (-20°C ~ 45°C)

2 ~ 6m (6.5 to 19.5 ft) Field Rate 120 ﬁelds/second

Type 165mAh, 3.0V (CR2025) Operating time 150 hours

[ Recommendation ]- EU ONLY

Hereby, Samsung Electronics, declares that this 3D Active Glasses is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

This equipment may be operated in all EU countries.

English - 17

[PF8500-ZT]BN68-04828H-04L03.indb 17 2013-10-31  4:01:39

What is Remote Support?

Samsung Remote Support service offers you one-on-one support with a Samsung Technician who can remotely.

• Diagnose your TV

• Adjust the TV settings for you

• Perform a factory reset your TV

• Install recommended ﬁrmware updates

How Does it Work?

Having a Samsung Tech remotely service your TV is really pretty simple

1. Call Samsung Contact Centre and ask for

remote support.

2. Open the menu on your TV and go to the Support

section.

3. Select Remote Management and Provide the Pin# to the agent.

4. The agent will then access your TV. That's

it!

Troubleshooting

If you have any questions about the TV, ﬁrst refer to this list. If none of these troubleshooting tips apply, please visit “www.samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.

Issues Solutions and Explanations

The TV won’t turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the TV.

There is no picture/video. • Check the cable connections. Remove and reconnect all cables connected to the TV and external

The remote control does not work. • Replace the remote control batteries. Make sure the batteries are installed with their poles (+/–) in

The cable/set top box remote control doesn’t turn the TV on or off or adjust the volume.

• Make sure the wall outlet is working.

• Try pressing the

refer to “Remote control does not work” below.

devices.

• Set the video outputs of your external devices (Cable/Sat Box, DVD, Blu-ray etc) to match the TV's input connections. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.

• Make sure your connected devices are powered on.

• Be sure to select the correct input source.

• Reboot the connected device by unplugging it, and then reconnecting the device’s power cable.

the correct direction.

• Clean the sensor’s transmission window on the remote.

• Try pointing the remote directly at the TV from 5~6 feet away.

• Programme the Cable/Set remote control to operate the TV. Refer to the Cable/Set-Top-Box user

manual for the SAMSUNG TV code.

button on the TV to make sure the problem is not the remote. If the TV turns on,

To keep your TV in optimum condition, upgrade to the latest firmware on the Samsung web site by USB

✎

(Samsung.com > Support > Downloads). Some of above pictures and functions are available at specific models only.

✎

English - 18

[PF8500-ZT]BN68-04828H-04L03.indb 18 2013-10-31  4:01:39

Mounting the TV on the Wall Using the Wall Mount Kit (Optional)

Wall or Ceiling Mounting

If you mount this product on a wall, it should be mounted only as recommended by the manufacturer. Unless it is correctly mounted, the product may slide or fall, causing serious injury to a child or adult, and serious damage to the product.

Installing the Wall Mount Kit

The wall mount kit (sold separately) lets you mount the TV on the wall. For detailed information about installing the wall mount, see the instructions provided with the wall mount. We

recommend you contact a technician for assistance when installing the wall mount bracket. We do not advise you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install the wall mount on your own.

Installing a Wall Mount Attaching the Blanking Bracket

Blanking Bracket

For more detailed information, refer to the User Manual of

the Wall Mount Kitv when you purchase.

When installing the TV onto a wall, attach the Blanking

Bracket as shown.

English

Wall Mount Kit Speciﬁcations (VESA)

The wall mount kit is not supplied, but sold separately. Install your wall mount on a solid wall perpendicular to the

✎

floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.

NOTE

✎

− Standard dimensions for wall mount kits are shown in the table below.

− When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are

provided.

− Do not use screws that do not comply with the VESA standard screw speciﬁcations.

− Do not use screws that are longer than the standard dimension or do not comply with the VESA standard

screw speciﬁcations. Screws that are too long may cause damage to the inside of the TV set.

− For wall mounts that do not comply with the VESA standard screw speciﬁcations, the length of the screws may

differ depending on the wall mount speciﬁcations.

− Do not fasten the screws that are too strongly; this may damage the product or cause the product to fall,

leading to personal injury. Samsung is not liable for these kinds of accidents.

− Samsung is not liable for product damage or personal injury when a non-VESA or non-speciﬁed wall mount is

used or the consumer fails to follow the product installation instructions.

− Do not mount the TV at more than a 15 degree tilt.

Product

Family

PDP-TV

[Ultra-Slim]

Unscrew the hole around before installing Wall-Mount on the wall.

✎

Inch VESA Spec.(A * B) Standard Screw Quantity

51 400 X 400

M8 4

60 - 64 600 X 400

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

English - 19

[PF8500-ZT]BN68-04828H-04L03.indb 19 2013-10-31  4:01:40

Storage and Maintenance

If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please clean the

✎

debris off before watching TV. The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and

✎

screen carefully using a soft cloth to prevent scratches.

Do not spray water directly onto the product. Any liquid that goes into the product may cause a failure, ﬁre, or electric shock.

Clean the product with a soft cloth dampened with a small amount of water. Do not use a ﬂammable liquid (e.g. benzene, thinners) or a cleaning agent.

Providing Proper Ventilation for Your TV

When you install your TV, maintain a distance of at least 10 cm between the TV and other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a ﬁre or a problem with the product caused by an increase in its internal temperature.

Whether you install your TV using a stand or a wall-mount, we strongly recommend you use parts provided by

✎

Samsung Electronics only.

• If you use parts provided by another manufacturer, it may cause difﬁculties with the product or result in injury caused by the product falling.

Installation with a stand. Installation with a wall-mount.

10 cm

Other Warnings

The actual appearance of the TV may differ from the images in this manual, depending on the model.

✎

Be careful when you touch the TV. Some parts can be somewhat hot.

✎

English - 20

[PF8500-ZT]BN68-04828H-04L03.indb 20 2013-10-31  4:01:40

Assembling the Cable manager

Eco Sensor and Screen Brightness

Eco Sensor measures the light in your room and optimizes the brightness of the TV automatically to reduce power consumption. This causes the TV to brighten and dim automatically. If you want to turn this function off, go to Screen Menu > System > Eco Solution > Eco Sensor

English

Do not block the sensor with any material. It can decrease picture brightness.

1. Eco Sensor: This power-saving feature automatically adjusts the screen brightness of the TV according to the

ambient light intensity detected by the Light Sensor.

2. To enable or disable Eco Sensor, go to Screen Menu > System > Eco Solution > Eco Sensor and select On or Off.

3. Precaution: If you ﬁnd the screen too dark while watching the TV in a dark area, this may be caused by the Eco Sensor.

English - 21

[PF8500-ZT]BN68-04828H-04L03.indb 21 2013-10-31  4:01:41

Tip Prevention – Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang on or destabilize the TV. Doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided in the Safety Flyer included with your TV. For added stability and safety, you can purchase and install the anti-fall device as described below.

To Avoid the TV from Falling

1. Put the screws into the clamps and ﬁrmly fasten them onto the wall. Conﬁrm that the screws have been ﬁrmly

installed onto the wall.

You may need additional material such as an anchor depending on the

✎

type of wall. Since the necessary clamps, screws, and string are not supplied,

✎

please purchase these additionally.

2. Remove the screws from the back centre of the TV, put the screws into the clamps, and then fasten the screws onto the TV again.

Screws may not be supplied with the product. In this case, please

✎

purchase the screws of the following specifications. Screw Specifications

✎

− For a 51 ~ 64 inch: M8

3. Connect the clamps ﬁxed onto the TV and the clamps ﬁxed onto the wall with a strong cable and then tie the string tightly.

NOTE

✎

• Install the TV near to the wall so that it does not fall backwards.

• It is safe to connect the string so that the clamps ﬁxed on the wall are equal to or lower than the clamps ﬁxed on the TV.

• Untie the string before moving the TV.

4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you

have any doubt about the security of your connections, contact a professional installer.

wall

Prevention of vibration on an unstable or slanted shelf

Placing the TV on an uneven surface may cause the TV to

[

shake. If placing the TV on an uneven surface, use the provided rubber packing to secure the TV stand. See the figure below and attach the provided rubber packing to the TV stand.

Rubber packing

English - 22

[PF8500-ZT]BN68-04828H-04L03.indb 22 2013-10-31  4:01:41

+ 51 hidden pages