Samsung PS51F5500AK User Manual

E-MANUAL

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model______________ Serial No.______________

Contents

e-Manual Guide

Viewing the e-Manual

1 Scrolling a Page

1 Using the Top Icons

1 Returning to the Home Page

1 Searching the Index

2 Searching Pages

2 Closing the e-Manual

2 Jumping to a Menu Item

2 Updating the e-Manual

Connections

Aerial Connection

Video Device Connections

5 HDMI Connection

6 Component Connection

17 Satellite System

19 Scanning for Satellite Channels

Channel Management

22 Remove Channels

22 Number Change

22 Channel Lock

22 Channel Unlock

22 Rename Analogue Channels

Common Interface

Audio Options

Favourites Channels

25 Add Channels

25 Remove Channels

26 Rearrange the Favourites Channels List

26 Rename a Favourites Channel List

26 Copy a Favourites Channels List

6 AV Connection

7 SCART Connection

Audio Device Connections

8 Digital Audio (Optical) Connection

9 ARC (Audio Return Channel)

Headphone Connection

Computer Connection

10 HDMI Connection

11 HDMI-to-DVI Connection

Getting Started

Switching Between Video Sources

Programming

13 Auto Tuning

Network Settings

Network Configuration

27 Wired Network

28 Wireless Network

28 LED 5300 series

29 Wireless Network Precautions

29 LED 5300 series

29 Network Security Protocols

Wired Network Setup

30 Automatic Wired Network Setup

31 Manual Wired Network Setup

33 Failed Wired Connection

Wireless Network Setup

34 Automatic Wireless Network Setup

35 Manual Wireless Network Setup

37 WPS Button

Channel Settings

14 Country (Area)

15 Manual Tuning

15 When Aerial Source is set to Air or Cable

16 Transfer Channel List

16 Delete CAM Operator Profile

37 Failed Wireless Connection

38 Dynamic versus Static IP Addresses

Checking the Network Status

40 Wi-Fi Direct

40 AllShare Settings

40 Rename the TV

Controlling TV

Smart Touch Control

41 Inserting the Batteries (AAA X 2)

41 Connecting to the TV

42 Reconnecting the Smart Touch Control

42 Battery Low Alarm

43 Buttons and Descriptions

45 Special Functions

SMART Interaction

55 Precautions

55 Face Recognition

55 TV Camera Use

56 Motion Control

56 Voice Recognition

Voice Recognition

58 Operating Environment

58 Voice Recognition Tutorial

58 Enabling Voice Recognition

Touchpad

46 Dragging

46 Press

47 Flicking

47 Pressing and Holding

47 Pressing and Dragging

48 Scrolling Up/Down

48 Scrolling Left/Right

49 Changing Channels by Entering Numbers

49 Numerical Input Guide

49 Adjusting the Touchpad

49 Show Status and Notification Banner

50 Recommendations

50 History

50 Deleting History Data

50 Searching

Using the Virtual Remote Control

51 Changing the Virtual Remote Control Panel

59 Basic Voice Recognition Use

59 Voice Recognition Settings

60 Interactive Voice Recognition Commands

60 Deactivating Voice Recognition

Motion Control

61 Operating Environment

62 Motion Control Environment Test

62 Motion Control Tutorial

62 Motion Control Activation

63 Using the Basic Motion Controls

63 Motion Control Options

64 Motion Control Screen

64 The Screen Composition while Viewing TV

65 The Smart Hub Screen Composition

Face Recognition

67 Operating Environment

67 Note the following when using Face Recognition.

68 Face Registration

68 Face Recognition Login

51 Change a position of the Virtual Remote Panel

51 Using the Number Panel

51 Using the Playback Control Panel

51 Using the Quick Access Panel

51 Adjusting the virtual remote control

Universal Remote Setup

52 Connecting the IR EXTENDER CABLE

52 Add the External Device

53 Using the Universal Remote Control

53 Registered External Device Management

Entering Text using the Onscreen Keypad

54 Entering Text using the QWERTY Keypad

54 Additional Features

Using Peripheral Devices

69 Keyboard Connection

69 Keyboard Use

70 Mouse Connection

70 Mouse Use

TV Viewing

71 Programme Info

71 Change the Broadcast Signal

71 Guide

71 Change Channels

72 Recording the Current Programme

72 Change Category

72 Quick Navigation

72 Schedule Viewing

72 Schedule Recording

72 Checking the Programme Info

73 Channel List

73 Change Channels

73 Sorting

74 Genre

74 Change the Broadcast Signal

74 Change the Channel List

Schedule Viewing

75 Digital Channel Schedule Viewing

75 Guide

75 Programme Info

76 Analogue Channel Schedule Viewing

76 Cancel a Schedule Viewing

76 Edit Schedule List

Analogue Screen Calibration

89 Fine Tune

Subtitles

90 Show Subtitles

90 Subtitle Options

90 Changing the Teletext Language

TV Settings

Basic Picture Settings

91 Changing the Picture Mode

92 Picture Quality

Schedule Recording

77 Precautions

78 Dedicated Recording Device Setup

78 Plug & Play

79 Dedicated Recording Device Management

79 Programme Recording

79 Instant Recording

79 Guide

80 Programme Info

80 Specified Time and Date

80 Cancel the Schedule Recording function

80 Edit Timer List

Recorded Programme Playback

81 Changing the Viewing Mode

81 Filtered View

81 Playlist Creation

81 Recording Lock/Unlock

82 Deleting Saved Programmes

82 Rename

82 Device Management

82 Playing a Different Programme

92 Applying the Current Picture Quality Setting to Another

Input

93 Picture Size

94 Screen Position

94 4:3 Screen Size

94 Picture Off

94 Picture Reset

Advanced Settings

Picture Options

99 Calibrating the Screen Display

99 Auto Adjustment

99 PC Screen Adjustment

Basic Sound Settings

101 Changing the Sound Mode

102 Adjusting the Sound Settings

102 Auto Volume

102 TV Installation Type

102 3D Audio

102 Sound Reset

82 Programme Scan

83 Additional Recorded Programme Playback Settings

Timeshift

84 Precautions

85 Activating the Timeshift function

3D TV

86 Precautions

86 Tips

87 Activating 3D Mode

87 Setting 3D Effects

PIP

Speaker Settings

103 Speaker Select

103 Additional Settings

103 DTV Audio Level

104 Digital Audio Out

104 Dolby Digital Comp

104 Samsung Audio Device Connection

Clock and Timer

105 Setting the Time

105 Auto

105 Time Offset

106 Manual

106 Sleep Timer

106 On Timer

107 Off Timer

Screen Protection and Maintenance

108 Eco Solution

109 Screen Burn Protection

109 Pixel Shift

109 Auto Protection Time

110 Scrolling

110 Side Grey

110 Auto Protection Time

Password

111 Password Change

111 Programme Rating Lock

Additional Features

112 Changing the Menu Language

112 Game Mode

112 Precautions and Restrictions

113 BD Wise

113 Menu Transparency

113 Sound Feedback

113 Panel Locking

114 Booting Logo

114 Anti Flicker

114 DivX® Video On Demand

120 Application Check

120 Connecting a Service to a Samsung Account

121 Watching Videos

121 Friend Profile

121 Video Calling a Friend

121 Filters

Apps

122 Precautions

123 Installing Standard Applications

123 Launching an Application

123 Samsung Apps

123 Searching for Apps

123 Installing Applications

124 Apps Management

124 Edit My Apps

124 Change Order

124 Removing Applications

124 Adding Applications

125 Deleting Applications

125 Managing Application Folders

125 Application Lock/Unlock

125 Application Update

126 Fitness

126 Creating a Profile

126 Kids

127 Web Browser

127 Social Networks

127 Linking Service Accounts

127 3D Explorer

SMART TV Features

Smart Hub

115 Agreements Required to Use Smart Hub

116 Samsung Account

116 Creating a Samsung Account

116 Terms & Conditions and Privacy Policy

117 Logging In

117 Linking a Samsung Account to Other Accounts

117 Managing Accounts

118 Resetting Smart Hub

118 Searching

118 Keyword Search

118 Setting Search Scope

118 Sports Mode

119 Status and Notification

119 Motion Control Configuration

119 Samsung Account Configuration

119 Network Configuration

119 Notifications

Social

120 Social Settings

128 Apps Settings

128 Auto Ticker

128 Push Notifications Settings

128 Channel-Bound Apps

128 Properties

On TV

130 On TV Settings

130 On TV Setup

130 Recommendation Notice

130 Recommendation Method

130 Adult Content Block

131 Auto Start

131 Watching an On-Aerial Recommended Programme

131 Scheduled Recommended Programme Info

131 Activating the Guide

131 Programme Recommendations by Time

131 Watching Recorded Programmes

Films and TV Shows

132 Sub Menus on the bottom of the main screen

133 Custom Recommendations List

133 Watching Content

133 VOD Rating Lock

133 Miscellaneous

148 Mobile Device Connection

Photos, Videos & Music

135 Restrictions

136 Supported File Formats

136 USB Device Connection

136 USB Device Removal

136 Playing all the Content on a Storage Device

136 Clearing the Recent Playlist

137 Using Networked External Storage Devices

138 Allowing DLNA Device Connections

138 AllShare

138 Exporting Contents

Video Playback

139 Changing the view mode

139 Playlist Creation

139 Opening a Different File

140 Video Scanning

140 Show Subtitles

141 Additional Video Playback Settings

Other Information

Support

149 Remote Management

149 What is Remote Support?

150 How Does it Work?

151 e-Manual

151 Self Diagnosis

151 Picture Test

152 Sound Test

152 Motion Control Environment Check

152 Signal Information

152 Reset

153 Updating the Software

153 Update now

153 Manual Update

154 Auto update

154 Manage Satellite Channels (when the aerial was set to

Satellite)

154 Usage Mode

154 Support Info

Music Playback

142 Changing the view mode

142 Playlist Creation

142 Music Scanning

142 Opening a Different File

142 Additional Music Playback Settings

Photo Playback

143 Changing the view mode

143 Slideshow

143 Slideshow Settings

143 Playlist Creation

143 Opening a Different File

143 Background Music

144 Mini Player

144 Additional Photo Playback Settings

Anynet+ (HDMI-CEC)

145 Precautions

146 Anynet+ (HDMI-CEC) Setup

146 Anynet+ (HDMI-CEC) Use

146 Switching between Anynet+ Devices

147 Anynet+ (HDMI-CEC) Device Menu

147 ARC

Mirroring Mobile Device Screens on the TV

148 Screen Mirroring

Data Service

155 Auto Run Data Service

155 Using Data Service

156 Main Data Service buttons and their functions

HbbTV

Connecting to a TV Viewing Card slot

158 To connect the CI CARD, follow these steps:

158 Using the “CI or CI+ CARD”

159 To connect the CI CARD Adapter, follow these steps:

160 Using the “CI or CI+ CARD”

Teletext Feature

Anti-theft Kensington Lock

Display Resolution

163 LED 5300 series and above, PDP 5500 series

163 IBM

163 MAC

164 VESA DMT

165 LED 4500 series

165 IBM

165 MAC

165 VESA DMT

166 Picture Size and Input Signal

166 Supported 3D Resolutions

166 HDMI

Subtitle and Media Contents file formats, and Codec

168 Subtitle

168 External

168 Internal

169 Supported image resolutions

169 Supported music file formats

170 Video Codec

171 Video Codecs

171 Other Restrictions

171 Video Decoders

171 Audio Decoders

172 3D Precautions

172 CAUTION

173 SAFETY PRECAUTIONS

174 WARRANTY

S-Recommendation Disclaimer

176 S Recommendation with Voice Interaction

176 S Recommendation

Licence

Troubleshooting

Screen

Sound

3D TV

Connection

182 Aerial (Air / Cable / Satellite) Connection

183 Computer Connection

Networking

Miscellaneous

Data Service

Schedule Recording / Timeshift

Anynet+ (HDMI-CEC)

Photos, Videos & Music

Apps

Reset the Personal Info and TV settings

Web Browser

Viewing the e-Manual

The embedded e-Manual contains information about your TV's key features.

This TV has a built-in user guide. To read it, use one of the following methods:

Open the Support menu and choose e-Manual (Troubleshooting).

●

Press the E-MANUAL button on the standard remote control.

●

Press the MORE button on the Smart Touch Control to display control buttons on the screen.

●

Flick the Touch Pad until e-Manual appears and select it.

Words in blue refer to screen menu options and words in light blue refer to remote control buttons.

A printable version of this guide is also available at www.samsung.com/support.

Scrolling a Page

To scroll a page, use of one of the following methods:

Press the or button on the scroll bar at the right edge of the screen.

●

Drag or flick up or down the line on either the left or right edge of the touchpad. This method is

●

not available for LED 4500 - 6300 Series.

Place the focus on the or button at the right edge of the screen, drag or flick up or down

●

on the touchpad.

For LED 4500 - 6300 Series

Place the focus on the or button at the right edge of the screen, press the up or down

●

arrow button on the remote.

Using the Top Icons

Use the Back, Forward, and Opened page icons on the top left of the screen to navigate through pages. These icons are available when two or more pages are passed.

Returning to the Home Page

To return to the home page, press the a button or select on the top right of the screen.

Searching the Index

Press the b button or select on the top right of the screen to display the index. Select a term to display the page containing the term.

Searching Pages

Press the { button or select on the top of the screen to access the search screen. Enter a search phrase and select Done. Select an item from the search results list to navigate to the relevant page.

Closing the e-Manual

To close the e-Manual, press and hold the RETURN button or select at the upper-right corner of the screen or press EXIT button.

Jumping to a Menu Item

To directly jump to the menu item that is described in the current section, select to jump from a menu item directly to the related section in the e-Manual. If you want to read an

e-Manual entry on a specific screen menu feature, press the Virtual Remote panel's or the regular

remote's E-MANUAL button to load the corresponding e-Manual page.

For LED 4500 - 6300 Series

On the screen menu, press the E-MANUAL button that appears on the screen.

This feature may not be available, depending on the menu.

Try Now

. It is possible

Updating the e-Manual

Open the Smart Hub and select Apps, and then select More Apps. The e-manual can be updated in the same way with an application update.

On the More Apps screen, select Apps to update. Select e-Manual from the list. The e-Manual starts updating to the latest version. However, Apps to update appears on the screen only when the update is required.

Aerial Connection

Refer to the diagram and connect the aerial cable to the aerial input connector. Make sure that you do not bend the cable. The number of connectors and their names and locations may vary depending on the model.

Connect the correct aerial cable for your viewing environment (over-the-air or cable broadcasting). However, an aerial connection is not necessary if you are using a cable box or satellite receiver.

Video Device Connections

This TV has a wide range of connectors for video input from video devices such as Blu-ray players, DVD players, camcorders and gaming consoles. Below is a list of featured connectors shown in descending order of picture quality.

HDMI

●

Component

●

Connect the video device to the TV via an HDMI connector for the best picture quality. If the device does not have an HDMI connector, try a component connector to get the next best possible picture quality.

The number of connectors and their names and locations may vary depending on the model.

When connecting an external device, refer to the device's operating manual. The number of external device connectors and their names and locations may vary depending on the manufacturer.

HDMI Connection

Refer to the diagram and connect the HDMI cable to the video device's HDMI output connector and the TV's HDMI input connector. One of the following HDMI cable types is recommended:

High-Speed HDMI Cable

●

High-Speed HDMI Cable with Ethernet

●

Use an HDMI cable with a thickness of 14 mm or less. Using a non-certified HDMI cable may result in a blank screen or a connection error.

Some HDMI cables and devices may not be compatible with the TV due to different HDMI specifications.

This TV does not support HDMI Ethernet Channel. Ethernet is a LAN (Local Area Network) built on coaxial cables standardized by the IEEE.

Component Connection

Refer to the diagram and connect the AV cable to the TV's component input connectors and the device's component output connectors. Make sure the cable colours match the connector colours.

AV Connection

Refer to the diagram and connect the AV cable to the TV's external input connectors and the device's AV output connectors.

If you are using the TV's external input connectors, connect the video cable to the Y connector. Some models feature a video connector as well. In this case, connect the cable to the video connector.

SCART Connection

Connect the TV’s SCART input connector to the device’s SCART output connector using a SCART cable. An extra audio connection is not needed because SCART also carries audio.

SCART can only carry standard-definition video.

Audio Device Connections

This SMART TV has a wide range of connectors for audio input from devices such as amplifiers, Bluray players and DVD players. For better audio quality, it is a good idea to use an AV receiver.

Digital Audio (Optical)

●

ARC (Audio Return Channel)

●

The number of connectors and their names and locations may vary depending on the model.

When connecting an external device, refer to the device's operating manual. The number of external device connectors and their names and locations may vary depending on the manufacturer.

Digital Audio (Optical) Connection

Refer to the diagram and connect the optical cable to the TV's digital audio output connector and the device's digital audio input connector.

Connecting the device using an optical cable does not automatically turn off the TV speakers. To turn off the TV speakers, open the Speaker Select (Screen Menu > Sound > Speaker Settings > Speaker

Select) menu, then set External Speaker.

Adjust the audio device's volume using its remote control.

An unusual noise coming from the audio device while it is being used may indicate a problem with the audio device itself. If this is the case, ask for assistance from the audio device manufacturer.

5.1-channel audio for digital channels is only available with broadcasts that support 5.1-channel audio.

ARC (Audio Return Channel)

This TV supports 3D and ARC (Audio Return Channel) functions via an HDMI cable. ARC enables digital sound to be output using just an HDMI cable. However, ARC is only available through the HDMI (ARC) port and only when the TV is connected to an ARC-enabled AV receiver. Connect the HDMI cable to the TV's HDMI (ARC) connector and the device's HDMI output connector.

The connectors may not be supported depending on the model.

Headphone Connection

Refer to the diagram and connect the headphones to the headphone output connector. Only use headphones with a 3-conductor TRS type jack. The headphone volume and the TV volume are adjusted independently of each other. While the headphones are connected, the TV speakers are muted and certain Sound options are deactivated.

This option is only available for LED TVs.

The connectors may not be supported depending on the model.

Computer Connection

This TV has the following computer connection ports:

HDMI

●

HDMI-to-DVI

●

For the highest picture quality, connect the computer to the HDMI/DVI port. Not all computers are HDMI-enabled. In this case, use an HDMI-to-DVI cable to connect the computer to the TV. Refer to the "Display Resolution" for information on the resolution settings supported by the TV.

HDMI Connection

Refer to the diagram and connect the HDMI cable to the TV's HDMI input port and the computer's HDMI output port.

HDMI-to-DVI Connection

Refer to the diagram and connect the HDMI-to-DVI cable to the TV's HDMI (DVI) port and the computer's DVI output port. The HDMI-to-DVI connection is available through the HDMI (DVI) port only.

DVI cannot carry audio. To listen to the computer sound, connect the external speaker to the computer’s audio output connector.

Switching Between Video Sources

Press SOURCE button to switch between devices connected to the TV.

For example, to switch to a game console connected to the second HDMI connector, press SOURCE button. From the Source list, select HDMI2. The connector names may vary depending on the product.

Select TOOLS at the upper-right corner of the Source screen to access the following functions.

Information

●

View detailed information about the connected devices.

Edit Name

●

You can edit name of devices connected to the TV to more easily identify external sources.

With a computer connected to the TV's HDMI (DVI) port via an HDMI cable, for example, you can change Edit Name to PC.

With a computer connected to the TV's HDMI (DVI) port via an HDMI-to-DVI cable, for example, you can change Edit Name to DVI PC.

With an AV device connected to the TV's HDMI (DVI) port via an HDMI-to-DVI cable, for example, you can change Edit Name to DVI Devices.

Refresh

●

Select this if a connected device does not appear in the list. If the list does not show the device after selecting Refresh, check the status of the TV-to-device connection. This function is only available Anynet+ (HDMI-CEC) function set to On.

Disconnect USB Device

●

Remove the USB device from the list safely. This function is only available when the USB device selected.

Universal remote setup

●

To add a new external device to control it with the Touch Remote Control, press the SOURCE button and select Universal remote setup on the top right of the screen. Using the universal remote control, users can control external devices connected to the TV, such as a settop box, Blu-ray player, and AV receiver.

Programming

Scan and index available channels.

You can also remove channels from the index, and designate favourites channels for a more convenient TV viewing experience. Programming is not necessary if you are connected to a cable or satellite receiver.

Auto Tuning

Screen Menu > Broadcasting > Auto Tuning

Try Now

Broadcasting

Auto Tuning

Aerial Air

Channel List

Guide

Schedule Manager

Edit Channel

Edit Favourites

The displayed image may differ depending on the model.

Automatically scans and indexes all channels received through the TV's aerial input connector.

To start, navigate to Broadcasting and select Auto Tuning.

Select Start when prompted with a message. This initiates the Auto Tuning function. The process

can take up to 30 minutes to complete. If starting the Auto Tuning function when there is an existing index of channels overwrites the previous index.

Auto Tuning

●

Scans for channels automatically and stores them in the TV’s memory.

Cable Search Option (when the aerial was set to Cable)

●

Try Now

(Depending on the country)

Sets additional search options such as the frequency and symbol rate for a cable network search.

Try Now

Channel Settings

Screen Menu > Broadcasting > Channel Settings

Try Now

Broadcasting

Channel Settings

Subtitle Off

Audio Options

Programme Rating Lock Allow All

Teletext Language ----

Common Interface

Channel Lock On

Country (Area)

Screen Menu > Broadcasting > Channel Settings > Country (Area)

Select your country so that the TV can correctly auto-tune the broadcasting channels.

Try Now

The PIN input screen appears. Enter your 4 digit PIN number.

Depending on the country or region.

Digital Channel

●

Change the country for digital channels.

Analogue Channel

●

Change the country for analogue channels.

Manual Tuning

Screen Menu > Broadcasting > Channel Settings > Manual Tuning

Scans for a channel manually and stores in the TV.

If a channel is locked using the Channel Lock function, the PIN input window appears.

This function may not be supported depending on the country.

Try Now

When Aerial Source is set to Air or Cable

Digital Channel Tuning

●

Scans for a digital channel.

Select the New.

When selecting Aerial → Air: Channel, Frequency, Bandwidth

When selecting Aerial → Cable: Frequency, Modulation, Symbol Rate

Select the Search. When scanning has finished, a channel is updated in the channel list.

Analogue Channel Tuning

●

Scans for an analogue channel.

Select the New.

Set the Programme, Colour System, Sound System, Channel and Search.

Select the Store. When scanning has finished, a channel is updated in the channel list.

Channel mode

P (programme mode)

●

When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode.

C (aerial channel mode) / S (cable channel mode)

●

These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel.

Transfer Channel List

Screen Menu > Broadcasting > Channel Settings > Transfer Channel List

Try Now

Imports or exports the channel map.

You should connect USB storage to use this function.

The PIN input screen appears. Enter the PIN using your remote.

Import from USB: Import channel list from USB.

●

Export to USB: Export channel list to USB. This function is available when USB is connected.

●

Now

Try Now

Delete CAM Operator Profile

Screen Menu > Broadcasting > Channel Settings > Delete CAM Operator Profile

Select the CAM operator to delete.

Try Now

Try

Satellite System

Screen Menu > Broadcasting > Channel Settings > Satellite System

Try Now

A set of satellite dish settings must be configured for each wanted satellite before performing a channel scan.

Satellite System is available when Aerial is set to Satellite.

The PIN input screen appears. Enter your 4 digit PIN number.

Satellite Selection: You can choose the satellites for this TV.

●

LNB Power: Enables or disables the power supply for the LNB.

●

LNB Settings: Configures the outdoor equipment.

●

Try Now

Satellite: Selects the satellite for receiving digital broadcasts.

Transponder: Selects a transponder from the list or adds a new transponder.

DiSEqC Mode: Selects DiSEqC mode for the selected LNB.

Lower LNB Oscillators: Sets the LNB oscillators to a lower frequency.

Upper LNB Oscillators: Sets the LNB oscillators to a higher frequency.

Tone 22 kHz: Selects the Tone 22 kHz depending on the LNB type. For a universal LNB it should

be Auto.

SatCR/Unicable Settings: Configure single cable installation.

●

SatCR is short for satellite channel router.

This function may not support depending on the country.

Try Now

SatCR/Unicable: Enables or disable single cable installation support.

Slot Number: Select the SatCR user slot number for this receiver.

Slot Frequency: Enter the appropriate frequency to receive the signal from SatCR.

Detect Slot Frequency: Auto-detect the signal frequency for the selected slot number.

Verify Slot Frequency: Verify that the frequency entered corresponds to the selected slot.

Positioner Settings: Configures the aerial positioner.

●

Try Now

Positioner: Enables or disables the positioned control.

Positioner Type: Sets the positioned type between DiSEqC 1.2 and USALS (Universal Satellite

Automatic Location System).

My Longitude: Sets the longitude for my location.

–

My Latitude: Sets the latitude for my location.

–

Satellite Longitude Settings: Sets the longitude of user defined satellites.

–

User Mode: Sets the position of satellite aerial according to each satellite.

If you store the current position of satellite aerial according to a certain satellite, when the signal of that satellite is needed, the satellite aerial can be moved to pre-populated position.

Satellite: Selects the satellite to set the position for.

–

Transponder: Selects a transponder from the list for signal reception.

–

Moving Mode: Selects the movement mode between discrete and continuous movement.

–

Step Size: Adjusts the step size degrees for the aerial rotation. Step Size is available when

–

Moving Mode is set to Step.

Go To Stored Position: Rotates the aerial to the stored satellite position.

–

Aerial Position: Adjusts and stores the aerial position for the selected satellite.

–

Store Current Position: Stores current position as the selected positioner limit.

–

Installer Mode: Sets limits to the scope of movement of satellite aerial or reset the position.

Generally, installation guide uses this function.

Limit Position: Selects the direction of the positioner Limit.

–

Aerial Position: Adjusts and stores the aerial position for the selected satellite.

–

Store Current Position: Stores the current position as the selected positioner Limit.

–

Go to zero: Moves the aerial to the reference position.

–

Reset positioner limit: Allows the aerial to rotate over the full arc.

–

Reset All Settings: All satellite settings will be reset to the initial values.

●

Try Now

Scanning for Satellite Channels

Screen Menu > Broadcasting > Channel Settings > Manual Tuning

Press Scan after setting the items below.

Transponder

●

Selects the transponder.

Scan Mode

●

Selects either free or all channels to store.

Network Search

●

Enable / Disable network search.

Signal Quality

●

Display the current status of broadcasting signal.

Network Name

●

This displays the name of the network that is found.

Information on a satellite and its transponder is subject to change depending on the broadcasting conditions.

When setting is completed, move to Search. Channel scan is started.

Channel Management

Screen Menu > Broadcasting > Edit Channel

Try Now Try Now

Broadcasting

Auto Tuning

Aerial Air

Channel List

Guide

Schedule Manager

Edit Channel

Edit Favourites

The displayed image may differ depending on the model.

Remove channels from the index, and rename analogue channels. The Edit Channel screen icons indicate the following:

●

: An analogue channel

: A favourites channel

●

: A locked channel

In the Edit Channel screen, select the Virtual Remote panel's or the regular remote's TOOLS button to access the following options:

Sorting

●

(Digital channels only)

Change the list ordered by Name or Number.

Aerial

●

Choose between Air, Cable or Satellite.