Samsung PN51F8500AF, PN60F8500AF User Manual

QUICK START GUIDE

Welcome to your new Smart TV!

The following instructions cover assembling, connecting, and setting up your new TV. Make sure you have the accessories listed below.

Included in this box

Attach the TV to			Connect video			Insert the
						batteries into the
the Stand			devices
						remote control
							3
Step	1		Step	2		Step

Warning: Screens can be damaged from direct pressure when handled incorrectly. We recommend lifting the TV by the edges, as shown.

Remote Control

Stand Parts and Cables

BN68-05038A-05

	Power on and	Smart Touch Control	Cable clip	Power cord	IR extender
	start the initial
	setup

Step	4
	Batteries (AAA x 2)	RCA Adapter	Component adapter	Blanking Bracket

Also included: User Manual, regulatory guide, 3D Active Glasses,

Cleaning Cloth

Step 1	Attach the TV to the Stand
1	Lay the TV on a soft surface, screen side down.	5	Remove the protection film from the bottom of the
	Use the packing material to protect the screen.		TV and stand, as shown by the illustration.

REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV (such as the box).

2		Draw the base, legs, and screws out of the box
		to put them together into the stand.
	x 2	x 12
Base	Leg	Screws

]Don’t apply pressure to the base, as illustrated by the figure.

3	R	Fit the stand and mount together, making sure
		the notch on the mount aligns with the stand.

L

4	Insert 4 screws and secure the stand to the TV.
	x8 (M4 X L12)

6	Holding the stand parallel to the screen, slide the
	stand into the notches on the back of the TV.
	Fit the guide protrusion on each edge of the stand

in the matching hole on the sole of the TV.

7	Insert 2 screws and secure the stand to the TV.
	x4 (M4 X L12)

Warning: Handling the TV incorrectly can result in injury. After setting the stand into the TV, we recommend not lifting the TV using the stand. Lift it by grabbing the front and bottom, as shown.

Step 2 Connect video devices

We suggest using HDMI connections whenever possible for the best picture quality. Use the included AV adapter to connect older devices. The displayed image may differ depending on the model.

Good Connection : Component and AV

Match the colors on your device's cables to the colors on the jacks. Connect the yellow composite video out connector from an AV device to the yellow AV IN jack.

Component

AV

Wired Ethernet

EX-LINK

Connect the cable from the antenna or cable TV outlet.

Power Input

Best Connection : HDMI	HDMI Cable
We suggest using HDMI whenever
possible.
HDMI 1 is the default port for a cable	HDMI Port
or satellite set-top box.
Use the other ports for Blu-ray players,
game consoles, and other devices.

You can connect home theater systems to the OPTICAL or AUDIO OUT ports.

USB Connections

You can connect USB storage devices to the USB jacks and enjoy personal photos, videos, and music.

Step 3 Insert the batteries into the remote control

To open, put your plastic card into the notch.

Make sure you have the correct cable before plugging it in. Illustrations of common plugs and jacks are shown below.

Cable Plugs

Ports / Jacks

HDMI

USB

Optical

Do not plug cables in upside down.

Be sure to check the orientation of Warning the plug before plugging it in.

Step 4 Power on and start the initial setup

Information required:

•Wi-Fi network password (if you use one)

•Zip code

•Cable or satellite provider info

The TV must be connected to the Internet to use the Smart Features. If you have a wireless network, we recommend that you confirm that your network router is switched on and working before you start the initial setup. If you have a wired network, we recommend that you connect the TV to the network with a CAT 7 cable before you begin.

Power on to start the initial setup.

Connect to your network (wired or wireless)	Search for channels from
	your TV service provider
or

After you have finished the initial setup, you can configure the universal remote control settings. These settings let the Smart Touch remote control external devices connected to the TV, such as a set-top box or Blu-ray player.

Congratulations on your new Smart TV!

Troubleshooting

The stand is wobbly or crooked

Make sure the arrows on the stand are properly aligned.

The TV won’t turn on

Make sure all cables are fully inserted, and that the remote has batteries installed.

My remote, gesture, or voice controls don't work

The TV ships with protective stickers covering some of the sensors. Make sure all of them have been removed.

I don’t know where to plug in <device>

Devices without HDMI may require the included A/V adapter.

I have extra parts

The TV includes some optional parts to help with wall mounting and cable routing.

If you experience issues, please do not take the TV back to the store.

In the United States of America, call us at 1-800-SAMSUNG (1-800-726-7864) or visit us at www. samsung.com/spsn for support and warranty service.

For other countries, refer to "Contact SAMSUNG WORLDWIDE" in the user guide.