✎ If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.
✎ This Nanum Gothic Eco font is provided by NAVER.
Important Safety Instructions
Warning! Important Safety Instructions
Please read the safety instructions below before installing and using the product.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE
ARE NO USER SERVICEABLE PARTS INSIDE. REFER
ALL SERVICING TO QUALIFIED PERSONNEL.
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure
reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be
blocked or covered.
‐ Do not cover the slots and openings with a cloth or other materials.
‐ Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
‐ Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation
is provided.
• Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.
• Do not place a vessel containing water (vases etc.) on this apparatus. A water spill can cause a fire or electric shock.
• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub,
in a wet basement, or near a swimming pool, etc.). If this apparatus accidentally gets wet, unplug it and contact an
authorized dealer immediately.
• Make sure to pull out the power cord from the outlet before cleaning.
• This apparatus uses batteries. In your community, there might be regulations that require you to dispose of
these batteries properly to protect the environment. Please contact your local authorities for disposal or recycling
information.
• Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in a fire or
electric shock.
• Route power-supply cords so that they are not likely to be walked on or pinched by items placed on or against them.
Pay particular attention to cords at the plug end, where connected to adaptors, and at the point where they exit from
the apparatus.
• To protect this apparatus from a lightning storm, unplug it from the wall outlet and disconnect the antenna or cable
system. Do the same if you will leave the TV unattended and unused for a long period of time. This will prevent
damage to the set due to lightning and power line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC
adaptor corresponds to the local electrical supply. (depending on the model)
• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this
apparatus.
• Make sure to plug the power cord in until it is firmly inserted. Pull on the plug, not the cord, when removing the
power cord from the outlet. Do not touch the power cord with wet hands.
This symbol indicates that high voltage is
present inside. It is dangerous to make any
kind of contact with any internal part of this
product.
This symbol indicates that important
literature concerning operation and
maintenance has been included with this
product.
• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it unplug it immediately and contact an authorized dealer or service center.
• Pull the power plug out of the outlet if the TV is to remain unused or if you are leaving the house for an extended period
of time (especially when children, elderly, or disabled people will be left alone in the house).
‐ Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate
sparks and heat, or cause the insulation to deteriorate.
• Contact an authorized service center for information if you are installing your set in a location with heavy dust, high or
low temperatures, high humidity, chemical substances or where it will operate for 24 hours a day such as in an airport, a
train station, etc. Failure to do so may cause serious damage to your set.
• Use only a properly grounded plug and receptacle.
‐ An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
• To turn off the apparatus completely, you must pull the power plug out of the wall socket. Consequently, the power plug
should be readily accessible at all times.
• Do not allow children to hang on the product.
• Store the accessories (batteries, etc.) in a location safely out of the reach of children.
• Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to vibration.
• Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a service center.
• To clean the product, unplug the power cord from the power outlet and wipe the product using a soft cloth dipped in
a small amount of water. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener,
lubricants, or detergent. These substances may damage the appearance of the product or erase the printing on the
product.
• Do not expose the apparatus to dripping or splashing.
• Do not dispose of batteries in a fire.
• Do not short circuit, disassemble, or overheat the batteries.
• There is a danger of explosion if you replace the batteries with the wrong type of battery. Replace only
with the same or equivalent type.
• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
Providing Proper Ventilation for Your TV
When you install your TV, maintain a distance of at least 4 inches between the TV and other objects (walls, cabinet sides,
etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a problem with the product
caused by an increase in its internal temperature.
✎
Whether you install your TV using a stand or a wall-mount, use parts provided by Samsung Electronics only.
• If you use parts provided by another manufacturer, it may cause difficulties with the product or result in injury
caused by the product falling.
Installation with a stand.Installation with a wall-mount.
A detailed User’s Manual is built into your TV. For more information about how to view this e-Manual, see page 11.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearances. Product design and specifications may be changed without notice.
Important User Information
• Screen Image retention
Avoid displaying a still image, such as an image from a video game or a small fixed channel logo, on the plasma
display panel for more than a few minutes as it can cause screen image retention. This image retention is also known
as “screen burn”.
If displaying a still image is unavoidable, decrease the possibility of image retention by reducing the brightness and
contrast of the screen.
• Heat on the top of the Plasma TV
The top side of the TV may become hot after long periods of use as heat dissipates from the panel through the vent
hole in the upper part of the TV.
This is normal and does not indicate any defect or operational failure of the unit. However, children should be
prevented from touching the upper part of the TV.
• The TV is making a ‘cracking’ noise.
A ‘cracking’ noise may occur when the TV contracts or expands due to a change in the surrounding environment
such as temperature or humidity. This is normal and not a defect.
• Cell Defects
Your plasma TV has a panel containing 2,360,000 (HD-level) to 6,221,000 (FHD-level) pixels which require
sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels
will have no impact on the performance of the product.
• Avoid operating the TV at temperatures below 41°F (5°C)
• A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the Plasma TV in 4:3 format for a long period of time may leave traces of the borders on the
left, right, top, or bottom of the screen. Playing a DVD or a game console may have a similar effect.
Damage caused by the above effect is not covered by the warranty.
• After-images on the Screen.
Displaying still images from Video games and PC's for longer than a certain period of time may produce partial afterimages.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images for a long time.
• Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.
• Caution
The glass screen of your PDP TV can break if you accidently drop the TV. Handle the TV with care.
When moving the TV, always have two or more people pick it up and carry it as a safety precaution.
Do not lay the TV flat on its face or back.
Your Samsung Plasma TV is a high quality television that has been carefully packaged to protect the integrity of
its glass panel and component parts during shipment. It is, nonetheless, a fragile piece of electronics that requires
careful handling. Refrain from putting undue stress on any part of the packaging when shipping or unpacking the
TV. Use care when installing the TV. Avoid placing the TV in a location where it may be struck, exposed to sharp
impacts, or fall. Panel breakage caused by a fall or impact strike is not covered under the manufacturer’s warranty.
Connect your TV to an antenna or cable connection, and then connect your peripherals. When done, connect the
power cord to the TV, and then connect the power cord to an AC wall outlet. If you are connecting your TV to a cable
or satellite box using HDMI, Component, or Composite connections, you do not need to connect the ANT IN jack to an
antenna or a cable connection.
• For the best picture and audio quality, connect digital devices using an HDMI cable.
• If you connect an external device to the TV that uses an older version of HDMI, the video and audio may not work. If
this occurs, ask the manufacturer of the device about the HDMI version and, if it is out of date, request an upgrade.
• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.
• PC/DVI AUDIO IN input is not supported.
• For a set-top box connection using an HDMI cable, we highly recommend you connect the cable to the HDMI IN
1(STB) port.
• For an HDMI to DVI cable connection, you must use the HDMI IN 2(DVI) jack.
• If you connect a device to the HDMI IN 2(DVI) port using an HDMI to DVI cable, the audio will not work. DVI does not
transmit audio. You must add a separate audio connection.
• For PCs with DVI video out jacks, use an HDMI to DVI cable to connect the DVI out on the PC to the HDMI IN 2(DVI)
jack on the TV. Use the PC's speakers for audio.
To see Analog channels clearly,
prevent the antenna cables from
contacting the rear of the TV.
Connect the antenna cables
directly without using a divider.
Audio connection
Digital Audio System
OPTICAL
WRY
Cable
VHF/UHF
Antenna
RRBRG
or
PC connection
(Using an HDMI (to DVI) Cable)
DVI OUT
TV Side Panel
HDMI connection
Set-top box / Blu-ray player
HDMI OUT
USB connection
✎
The TV does not support
HDDs (Hard Disk Drives)
connected to the USB port.
TV Rear Panel
✎
W
The position of the port may
differ depending on the model.
✎
The Plasma TV may interfere with
amateur radio or AM radio.
Y
RBRG
R
W
R
W
✎
Using two-way radio mobile or
portable units, amateur radio, or
VIDEO OUT
AV connection
VCR
AUDIO OUT
R-AUDIO-L
COMPONENT OUT
PR PB Y
AUDIO OUT
R-AUDIO-L
Component connection
Blu-ray player / DVD
AM radio near your TV may cause
the TV to malfunction.
The optimal resolution for the 4 series TVs is 1024 x 768@60Hz. For the 5 series, 1920 x 1080@60Hz. If you connect the
TV to a device such as a PC or Set-Top-Box using an HDMI input, we recommend that you set the video output of that
device to the optimal resolution of the TV. If that is not possible, you can set the device to one of the resolutions listed
below.
ModeResolution
IBM
720 x 40031.469 70.087 28.322 -/+
640 x 48035.000 66.667 30.240 -/-
MAC
832 x 62449.726 74.551 57.284 -/-
1152 x 87068.68175.062100.000-/-
640 x 48031.469 59.940 25.175 -/-
640 x 48037.861 72.809 31.500 -/-
640 x 48037.500 75.000 31.500 -/-
800 x 60037.879 60.317 40.000 +/+
800 x 60048.077 72.188 50.000 +/+
800 x 60046.875 75.000 49.500 +/+
1024 x 76848.363 60.004 65.000 -/-
1024 x 76856.476 70.069 75.000 -/-
1024 x 76860.023 75.029 78.750 +/+
1152 x 86467.50075.000108.000+/+
VESA
DMT
1280 x 72045.00060.00074.250+/+
1280 x 80049.70249.70283.500-/+
1280 x
1024
1280 x
1024
1366 x 76847.71259.79085.500+/+
1440 x 90055.93559.887106.500-/+
1600 x
900RB
1680 x
1050
1920 x
1080
Horizontal
Frequency (KHz)
Vertical Frequency
(Hz)
Pixel Clock
Frequency (MHz)
63.98160.020108.000+/+
79.97675.025135.000+/+
60.00060.000108.000+/+
65.29059.954146.250-/+
67.50060.000148.500+/+
Sync
Polarity (H
/ V)
1024 X
768
cc
cc
cc
cc
cc
cc
cc
cc
cc
cc
cc
cc
1920 X
1080
c
c
c
c
c
c
c
c
c
c
c
✎
The interlaced mode is not supported.
✎
The set might operate abnormally if you select a non-standard video format.
This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually
impaired persons.
Display and select the available video
sources.
Turns the TV on and off.
Press to access channels directly.
Press to select additional digital
channels being broadcasted by the
same station. For example, to select
channel ‘54-3’, press ‘54’, then press
‘-’ and ‘3’.
Adjusts the volume.
Turns the remote control light on or
off. When on, the buttons become
illuminated for a moment when
pressed. (Using the remote control
with this button set to On will reduce
the battery usage time.)
Return to the previous channel.
Cut off the sound temporarily.
Change channels.
Displays the channel list on the
screen.
View Media Play.
Quickly select frequently used
functions.
Moves the cursor, selects the on-
screen menu items, and changes the
values seen on the menu.
Return to the previous menu.
E-MANUAL: Displays the e-Manual.
P.SIZE: Lets you choose the picture
size.
CC: Controls the caption decoder.
BCD
Displays the main on-screen menu.
Displays the EPG (Electronic Program
Guide).
Displays information on the TV screen.
Exit the menu.
Use these buttons according to the
directions on screen.