Samsung PN51E7000FFXZA User Manual

Contact SAMSUNG WORLDWIDE

SUPPORT

If you have any questions or comments about your Samsung TV, please contact the SAMSUNG customer care center.

Country

CANADA 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics Canada Inc., Customer Service 55

U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics America, Inc. 85 Challenger Road

Customer Care Center

Web Site Address

Standish Court Mississauga, Ontario L5R 4B2 Canada

Ridgeﬁ eld Park, NJ 07660

Plasma TV

user manual

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model _____________ Serial No. _____________

✎ If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.

BN68-04341A-00

A detailed User’s Manual is built into your TV. For more information about how to view this e-Manual see page 34.

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearances. Product design and speciﬁcations may be changed without notice.

Important Warranty Information Regarding

Wide screen format PDP Displays (with 16:9 aspect ratios, the ratio of the screen width to height) are primarily designed to view wide screen format fullmotion video. The images displayed on them should primarily be in the wide screen, 16:9 ratio format, or expanded to ﬁll the screen, if your model offers this feature, with the images constantly in motion. Displaying stationary graphics and images on the screen, such as the dark sidebars on non-expanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of PDP Displays that leave subtle, but permanent burned-in ghost images in the PDP picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On PDP models that offer picture sizing features, use these controls to view different formats as a full screen picture.

Be careful about the television formats you select and the length of time you view them. Uneven PDP aging as a result of format selection and use, as well as burned in images, are not covered by your Samsung limited warranty.

• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally speciﬁed, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product.

Excluded, but not limited to, are any originally speciﬁed provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free: – In the United States : 1-800-SAMSUNG (1-800-726-7864) – In Canada : 1-800-SAMSUNG

User Instructions

• Screen Image retention

Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as ‘screen burn’. To avoid such image retention, refer to e-Manual to reduce the degree of brightness and contrast of the screen when displaying a still image.

• Heat on the top of the Plasma TV

The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the TV.

• The product is making a ‘cracking’ noise.

A ‘cracking’ noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or humidity. This is normal and not a defect of the unit.

• Cell Defects

Your plasma TV has a panel containing 2,360,000 (HD-level) to 6,221,000 (FHD-level) pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

• Avoid operating the TV at temperatures below 41°F (5°C)

• A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects to the screen. Damages caused by the above effect are not covered by the Warranty.

• After-images on the Screen.

Displaying still images from Video games or a PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images for a long time.

• Warranty

Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty.

• Caution

Your Samsung Plasma TV is a high quality television that has been carefully packaged to protect the integrity of its glass panel and component parts during shipment. It is, nonetheless, a fragile piece of electronics that requires careful handling. Refrain from putting undue stress on any part of the packaging when shipping or unpacking the TV. Use care when installing the TV. Avoid placing the TV in a location where it may be struck, exposed to sharp impacts, or fall. Panel breakage caused by a fall or impact strike is not covered under the manufacturer's warranty.

The glass screen of your PDP TV can break if you accidently drop the TV. Handle the TV with care. When moving the TV, always have two or more people pick it up and carry it as a safety precaution. Do not lay the TV ﬂat on its

face or back.

English - 2

List of Features

• 3D: This exciting new feature enables you to view 3D content.

• SMART HUB: Your gateway to all your content, integrated in one place.

− Provides diverse entertainment choices.

− Lets you control your entertainment life with an easy-to-use, user friendly user interface.

− Gives you easy access to diverse apps, with more being added every day.

− Lets you customize your TV by grouping and sorting apps to your taste.

• AllShare Play: Lets you access, view, or play photos, videos, or music located on USB devices, digital cameras, cell phones, and PCs. PCs and cell phones can be accessed wirelessly, through your wireless network.

• Anynet+ (HDMI-CEC): Allows you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote.

• e-Manual: Provides a detailed, on-screen user's manual that's built into your TV. (page 34)

Accessories and Cables

Please make sure the following items are included with your TV. If any items are missing, contact your

✎

dealer.

The items’ colors and shapes may vary depending on the model.

✎

Make sure that there are no accessories hidden behind or under packing materials after you open the

✎

box.

• Remote Control (AA59-00559A) & Batteries (AAA x 2)

• Warranty Card / Safety Guide

• User Manual

• Cleaning Cloth (BN63-01798B)

• 3D Active Glasses

• Power Cord

English - 3

Input Cables (Sold Separately)

You will need one or more of these cables to connect your TV to your antenna or cable outlet and your peripheral devices (Blu-ray players, DVD players, etc.)

To purchase the RS232 cable, contact www.SamsungParts.com.

RS232 (AA39-00311A) HDMI HDMI-DVI Audio

Component Composite (AV) Coaxial (RF)

Make sure you have the correct cable before plugging it in. Illustrations of common plugs and jacks

✎

are below.

Cable Plugs Ports / Jacks

HDMI

USB

Optical

Do not plug cables in upside down. Be sure to check the orientation of the plug before plugging it in.

Warning

Wireless Keyboard (Sold Separately)

Wireless Keyboard

English - 4

Providing Proper Ventilation for Your TV

When you install your TV, maintain a distance of at least 4 inches between the TV and other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a ﬁre or a problem with the product caused by an increase in its internal temperature.

Whether you install your TV using a stand or a wall-mount, we strongly recommend you use parts

✎

provided by Samsung Electronics only.

• If you use parts provided by another manufacturer, it may cause difﬁculties with the product or result in injury caused by the product falling.

Installation with a stand. Installation with a wall-mount.

4 inches

Other Warnings

The actual appearance of the TV may differ from the images in this manual, depending on the model.

✎

Be careful when you touch the TV. Some parts can be somewhat hot.

✎

4 inches

English - 5

Stand Parts: 51 inches model only

Installing the Stand

Stand x 1 Guide Stand x 1 Screws x 8

(M4 X L12)

Follow the steps below to connect the TV to the stand. For more detailed instructions, see the separate stand installation guide.

x4 (M4 X L12)

Front

Rear

DO NOT USE

CHEMICALS

Top View

ATTENTION

DO NOT USE

GREASE

DO NOT USE OIL

Place a sof t cloth over a table to protect the TV, and then

✎

place the TV on the cloth screen side down. Insert the Stand Guide into the slot on the T V's bottom.

✎

Side View

(Correct assembly)

English - 6

(Incorrect assembly)

x4 (M4 X L12)

Stand Parts: 60, 64 inches model only

Stand x 1 Guide Stand x 1 Screws x 8

x 4 (M4 X L10)

x 4 (M4 X L12)

Follow the steps below to connect the TV to the stand. For more detailed instructions, see the separate stand installation guide.

x4 (M4 X L10)

Rear

Front

DO NOT USE

CHEMICALS

Top View

ATTENTION

DO NOT USE

GREASE

DO NOT USE OIL

Place a sof t cloth over a table to protect the TV, and then

✎

place the TV on the cloth screen side down. Insert the Stand Guide into the slot on the T V's bottom.

✎

Side View

(Correct assembly)

(Incorrect assembly)

x4 (M4 X L12)

English - 7

NOTE

✎

• Make sure to distinguish between the front and back of each component when assembling them.

• Make sure that at least two people lift and move the TV.

• Stand the product up before you tighten the screws. If you tighten the screws with the TV lying down, it may lean to one side when you stand it up.

Do not insert your fingers into the stand base slot of the TV when installing the stand base.

[

Installing the Wall Mount (Optional)

Wall or Ceiling Mounting

If you mount this product on a wall, it should be mounted only as recommended by the manufacturer. Unless it is correctly mounted, the product may slide or fall, causing serious injury to a child or adult, and serious damage to the product.

Installing the Wall Mount Kit

The wall mount kit (sold separately) lets you mount the TV on the wall.

For detailed information about installing the wall mount, see the instructions provided with the wall mount. We recommend you contact a technician for assistance when installing the wall mount bracket. We do not advise you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.

To order the wall mount kit, contact Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864).

English - 8

VESA Wall Mount Kit Notes and Speciﬁcations

Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to

✎

surfaces other than plaster board, please contact your nearest dealer for additional information. If you install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.

NOTE

✎

• Standard dimensions for wall mount kits are shown in the table below.

• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.

• Do not use screws that do not comply with the VESA standard screw speciﬁcations.

• Do not use screws that are longer than the standard length or do not comply with the VESA standard screw speciﬁcations. Screws that are too long may cause damage to the inside of the TV set.

• For wall mounts that do not comply with the VESA standard screw speciﬁcations, the length of the screws may differ depending on the wall mount speciﬁcations.

• Do not fasten the screws too ﬁrmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.

• Samsung is not liable for product damage or personal injury when a non-VESA or non-speciﬁed wall mount is used or the consumer fails to follow the product installation instructions.

• Do not mount the TV at more than a 15 degree tilt.

• Always have two people mount the TV on a wall.

Product Family

PDP TV

Remove the screws in the mounting holes before you install the wall mount.

✎

TV size in

inches

43 – 51 400 X 400

60 – 64 600 X 400

VESA screw hole specs

(A * B) in millimeters

Standard

Screw

M8 4

Quantity

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

Installing a Wall Mount from Another Manufacturer

To install a wall-mount from another manufacturer, use the HolderRing.

English - 9

Connecting the Power Cord and the Antenna or Cable Connection

VHF/UHF Antenna

Antenna Cable (Not Supplied)

Cable

Power Input

Plug the power cord into a wall outlet only after you have made all other connections.

✎

If you are connecting your TV to a cable or satellite box using HDMI, Component, or Composite

✎

connections, you do not need to connect the ANT IN jack to an antenna or a cable connection.

The Plasma TV may interfere with an amateur radio or AM radio.

✎

Using two-way radio mobile and portable units or amateur radio or AM radio near your TV may cause

✎

the TV to malfunction.

Use caution when you move or swivel the TV if the antenna cable is tightly connected. You could

✎

break the antenna jack off the TV.

ANT OUT

English - 10

Connecting to AV Devices (Blu-ray Players, DVD Players, etc.)

Using an HDMI Cable for an HD connection (up to 1080p, HD digital signals)

For the best quality HD picture, we recommend using an HDMI connection.

Use with DVD players, Blu-ray players, HD cable boxes, and HD Set-Top-Box satellite receivers.

Device Device

HDMI IN 1 (DVI), HDMI IN 2 (ARC), HDMI IN 3 (MHL)

✎

HDMI Cable (Not Supplied)

HDMI OUT

• For the best picture and audio quality, connect digital devices to the TV using HDMI cables.

• An HDMI cable supports digital video and audio signals, and does not require an audio cable.

− To connect the TV to a digital device that does not support HDMI output, use an HDMI to DVI cable and audio cables.

• If you connect an external device to the TV that uses an older version of HDMI, the video and audio may not work. If this occurs, ask the manufacturer of the device about the HDMI version and, if it is out of date, request an upgrade.

• Be sure to purchase a certiﬁed HDMI cable. Otherwise, the picture may not display or a connection error may occur.

• We recommend using a basic high-speed HDMI cable or an HDMI cable that is Ethernet compatible. Note that this product does not support the Ethernet function via HDMI.

• This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note that the ARC function is supported by the HDMI IN 2 (ARC) port only.

• The ARC function allows digital audio to output via the HDMI IN 2 (ARC) port on the TV. It can be enabled only when the TV is connected with an audio receiver that supports the ARC function.

• This product supports the Mobile High-Deﬁnition Link (MHL) function via an HDMI-MHL cable. Note that the MHL function is supported by the HDMI IN 3 (MHL) port only.

• The MHL function lets you display a mobile device's screen via the HDMI IN 3 (MHL) port on the TV. It can be enabled only when the TV is connected with a mobile device that supports the MHL function. For more detailed information, see "Using the MHL function" in e-Manual.

• When you use MHL devices via a MHL cable, Picture Size is set to Screen Fit automatically. But if you use MHL devices via an HDMI cable, Picture Size is not set to Screen Fit automatically. To view an original size, select Screen Fit in the Picture Size menu (Menu → Picture → Picture Size).

• If you use MHL devices via an HDMI cable, The TV will be recognized as the HDMI input. In this case, the TV may work differently than when you use MHL devices via a MHL cable.

English - 11

For the best cable connection to this product, use cables no thicker than the cable illustrated below:

✎

• Maximum thickness - 0.55 inches (14mm)

Using a Component Cable (up to 1080p HD signals) or an Audio/Video Cable (480i analog signals only)

Use with DVD players, Blu-ray players, cable boxes, STB satellite receivers, VCRs.

Red

Blue

Green

Red

White

Yellow

Red White

Audio Cable (Not Supplied) Audio Cable (Not Supplied)

Component Cable (Not Supplied)

Video Cable (Not Supplied)

Device Device

For better picture quality, we recommend the Component connection over the A/V connection.

✎

When you connect a Video cable to AV IN, the color of the AV IN [VIDEO] jack (green) will not match

✎

the video cable (yellow).

English - 12

Connecting to Audio Devices

Using an Optical (Digital) Cable Connection

Use with Digital Audio Systems, Ampliﬁers, and Home Theaters.

Digital Audio System

OPTICAL

Optical Cable (Not Supplied)

DIGITAL AUDIO OUT (OPTICAL)

✎

• When you connect a Digital Audio System to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.

• 5.1 CH (channel) audio is available when you connect the TV to an external device supporting 5.1 CH.

• When the receiver (or home theater) is set to on, you can hear sound output from the TV’s optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is a digital component such as a DVD player / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and you connected it to the TV via HDMI, you will only hear 2 CH audio from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an ampliﬁer or home theater.

English - 13

Connecting to a PC

AUDIO OUT

DVI OUT

HDMI OUT

Using an HDMI cable or an HDMI to DVI cable

Your PC may not support an HDMI connection.

✎

Use your PC speakers for audio.

✎

HDMI Cable (Not Supplied)

HDMI to DVI Cable (Not Supplied)

Audio Cable (Not Supplied)

The optimal resolution is 1920 X 1080 @ 60 Hz. See the Display Resolution page for all available resolutions (page 43).

NOTE

✎

• For an HDMI to DVI cable connection, you must use the HDMI IN 1 (DVI) jack.

• For PCs with DVI video out jacks, use an HDMI to DVI cable to connect the DVI out on the PC to the HDMI IN 1 (DVI) jack on the TV. Use the PC's speakers for audio.

• PC (D-Sub) input is not supported.

English - 14

+ 31 hidden pages