Samsung PN50A510P3F, PN50A530S2F, PN50A510P3FXZA, PN50A530S2FXZA, PN50A530S2FXZC Firmware Upgrade Manual

1

Samsung TV

F/W Upgrade Guide

Samsung Electronics

PN50A530S2FXZA, PN50A530S2FXZCP530

PN50A510P3FXZA, PN50A510P3FXZAP510

Model CodeSeries (P5)

2

Notice: Please read completely prior to upgrade

¾There are two separate firmware packages required to
complete the upgrading process of the P510, P530 series:

Version 1004.2 or higher for the main processor

P510_P530 firmware 1004.2.exe

Version 1004.3 for the sub processor

P510_P530 firmware 1004.3.exe

¾First determine what the current firmware version is for the
main processor (see below). If the version is 1004.2 or higher
proceed to Step 2 and upgrade the sub processor with 1004.3.

¾ How to check the firmware version

User Menu -> Setup -> SW Upgrade

When highlighted the “SW Upgrade”, press the “Info” button on Remote

TV F/W Version : XXXX

3

Step1. Upgrade the firmware version 1004.2

2. Connect the USB Memory Drive
to the USB port of your PC.
Copy the file into the USB Memory Drive.

3. Go to the USB Memory Drive and then double click the file
P510_P530 firmware 1004.2.exe.

1. Save the firmware file onto your computer.
File : P510_P530 firmware 1004.2.exe

4. Press “Unzip” button. 5. Unzipping is in progress.

6. After completing, press
“OK” and “Close” button.

7. The USB driver should contain one folder
named T-CNLAUSC

8. Safely disconnect the USB memory drive
by right clicking the green check mark
on the taskbar and then left click
“Safely Remove”.