Samsung PN64H5000, PN60F5350, PN51F5350, PN51F4550, PN51F5300 User Manual

E-MANUAL

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care
center.

Country Customer Care

Center

CANADA 1-800-SAMSUNG

(726-7864)

U.S.A 1-800-SAMSUNG

(726-7864)

Web Site Address

www.samsung.com/ca (English)
www.samsung.com/ca_fr (French)

www.samsung.com/us Samsung Electronics America, Inc. 85

Samsung Electronics Canada Inc., Customer
Service 55 Standish Court Mississauga,
Ontario L5R 4B2 Canada

Challenger Road Ridgefield Park, NJ 07660

Plasma TV

user manual

Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at

www.samsung.com/register

Model ____________ Serial No. _____________

© 2014 Samsung Electronics Co., Ltd. All rights reserved.

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 1 2014-01-03  10:30:38

BN68-05661A-00

✎ If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.

✎ This Nanum Gothic Eco font is provided by NAVER.

Important Safety Instructions

Warning! Important Safety Instructions

Please read the safety instructions below before installing and using the product.

CAUTION

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE

ARE NO USER SERVICEABLE PARTS INSIDE. REFER

ALL SERVICING TO QUALIFIED PERSONNEL.

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure
reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be
blocked or covered.

‐ Do not cover the slots and openings with a cloth or other materials.
‐ Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.
‐ Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation

is provided.

• Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.

• Do not place a vessel containing water (vases etc.) on this apparatus. A water spill can cause a fire or electric shock.

• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub,
in a wet basement, or near a swimming pool, etc.). If this apparatus accidentally gets wet, unplug it and contact an
authorized dealer immediately.

• Make sure to pull out the power cord from the outlet before cleaning.

• This apparatus uses batteries. In your community, there might be regulations that require you to dispose of
these batteries properly to protect the environment. Please contact your local authorities for disposal or recycling
information.

• Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in a fire or
electric shock.

• Route power-supply cords so that they are not likely to be walked on or pinched by items placed on or against them.
Pay particular attention to cords at the plug end, where connected to adaptors, and at the point where they exit from
the apparatus.

• To protect this apparatus from a lightning storm, unplug it from the wall outlet and disconnect the antenna or cable
system. Do the same if you will leave the TV unattended and unused for a long period of time. This will prevent
damage to the set due to lightning and power line surges.

• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC
adaptor corresponds to the local electrical supply. (depending on the model)

• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.

• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this
apparatus.

• Make sure to plug the power cord in until it is firmly inserted. Pull on the plug, not the cord, when removing the
power cord from the outlet. Do not touch the power cord with wet hands.

This symbol indicates that high voltage is
present inside. It is dangerous to make any
kind of contact with any internal part of this
product.

This symbol indicates that important
literature concerning operation and
maintenance has been included with this
product.

English - 2

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 2 2014-01-03  10:30:39

• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it ­unplug it immediately and contact an authorized dealer or service center.

• Pull the power plug out of the outlet if the TV is to remain unused or if you are leaving the house for an extended period
of time (especially when children, elderly, or disabled people will be left alone in the house).

‐ Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate

sparks and heat, or cause the insulation to deteriorate.

• Contact an authorized service center for information if you are installing your set in a location with heavy dust, high or
low temperatures, high humidity, chemical substances or where it will operate for 24 hours a day such as in an airport, a
train station, etc. Failure to do so may cause serious damage to your set.

• Use only a properly grounded plug and receptacle.

‐ An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

• To turn off the apparatus completely, you must pull the power plug out of the wall socket. Consequently, the power plug
should be readily accessible at all times.

• Do not allow children to hang on the product.

• Store the accessories (batteries, etc.) in a location safely out of the reach of children.

• Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to vibration.

• Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a service center.

• To clean the product, unplug the power cord from the power outlet and wipe the product using a soft cloth dipped in
a small amount of water. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener,
lubricants, or detergent. These substances may damage the appearance of the product or erase the printing on the
product.

• Do not expose the apparatus to dripping or splashing.

• Do not dispose of batteries in a fire.

• Do not short circuit, disassemble, or overheat the batteries.

• There is a danger of explosion if you replace the batteries with the wrong type of battery. Replace only
with the same or equivalent type.

• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN

FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

Providing Proper Ventilation for Your TV

When you install your TV, maintain a distance of at least 4 inches between the TV and other objects (walls, cabinet sides,
etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a problem with the product
caused by an increase in its internal temperature.

✎

Whether you install your TV using a stand or a wall-mount, use parts provided by Samsung Electronics only.

• If you use parts provided by another manufacturer, it may cause difficulties with the product or result in injury
caused by the product falling.

Installation with a stand. Installation with a wall-mount.

4 inches

4 inches

4 inches

4 inches

4 inches

4 inches

4 inches

English - 3

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 3 2014-01-03  10:30:39

A detailed User’s Manual is built into your TV. For more information about how to view this e-Manual, see page 11.

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearances. Product design and specifications may be changed without notice.

Important User Information

• Screen Image retention

Avoid displaying a still image, such as an image from a video game or a small fixed channel logo, on the plasma
display panel for more than a few minutes as it can cause screen image retention. This image retention is also known
as “screen burn”.
If displaying a still image is unavoidable, decrease the possibility of image retention by reducing the brightness and
contrast of the screen.

• Heat on the top of the Plasma TV

The top side of the TV may become hot after long periods of use as heat dissipates from the panel through the vent
hole in the upper part of the TV.

This is normal and does not indicate any defect or operational failure of the unit. However, children should be
prevented from touching the upper part of the TV.

• The TV is making a ‘cracking’ noise.

A ‘cracking’ noise may occur when the TV contracts or expands due to a change in the surrounding environment
such as temperature or humidity. This is normal and not a defect.

• Cell Defects

Your plasma TV has a panel containing 2,360,000 (HD-level) to 6,221,000 (FHD-level) pixels which require
sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels
will have no impact on the performance of the product.

• Avoid operating the TV at temperatures below 41°F (5°C)

• A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the Plasma TV in 4:3 format for a long period of time may leave traces of the borders on the
left, right, top, or bottom of the screen. Playing a DVD or a game console may have a similar effect.
Damage caused by the above effect is not covered by the warranty.

• After-images on the Screen.

Displaying still images from Video games and PC's for longer than a certain period of time may produce partial after­images.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images for a long time.

• Warranty

Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.

• Caution

The glass screen of your PDP TV can break if you accidently drop the TV. Handle the TV with care.
When moving the TV, always have two or more people pick it up and carry it as a safety precaution.

Do not lay the TV flat on its face or back.

Your Samsung Plasma TV is a high quality television that has been carefully packaged to protect the integrity of
its glass panel and component parts during shipment. It is, nonetheless, a fragile piece of electronics that requires
careful handling. Refrain from putting undue stress on any part of the packaging when shipping or unpacking the
TV. Use care when installing the TV. Avoid placing the TV in a location where it may be struck, exposed to sharp
impacts, or fall. Panel breakage caused by a fall or impact strike is not covered under the manufacturer’s warranty.

English - 4

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 4 2014-01-03  10:30:40

List of Features

• Media Play: Media Play lets you access, view, or play photos, videos, or music located on USB devices and digital

cameras.

• e-Manual: Provides a detailed, on-screen user's manual built into your TV. (page 11)

Accessories and Cables

✎

Please make sure the following items are included with your TV. If any items are missing, contact your dealer.

✎

The items’ colors and shapes may vary depending on the model.

✎

Check that there are no accessories hidden behind or under packing materials after you open the box.

• Remote Control (BN59-01177A) & Batteries (AAA x 2)

• Owner’s Instructions

• Power Cord

• Regulatory Guide

• Stand Wire Holder
(BN61-08370A)

Assembling the Stand Wire Holder

Input Cables (Sold Separately)

To purchase an HDMI cable, contact www.SamsungParts.com.

HDMI HDMI-DVI

Component Composite (AV) Coaxial (RF)

✎

Make sure you have the correct cable before plugging it in. Illustrations of common plugs and jacks are below.

Cable Plugs Ports/Jacks

HDMI

USB

Optical

Do not connect plugs in the opposite or wrong
direction. You can damage the TV port.

✎

For the best cable connection to this product, use cables no thicker than the cable illustrated below:

• Maximum thickness - 0.55 inches (14mm)

English - 5

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 5 2014-01-03  10:30:42

Making Connections

Connect your TV to an antenna or cable connection, and then connect your peripherals. When done, connect the
power cord to the TV, and then connect the power cord to an AC wall outlet. If you are connecting your TV to a cable
or satellite box using HDMI, Component, or Composite connections, you do not need to connect the ANT IN jack to an
antenna or a cable connection.

• For the best picture and audio quality, connect digital devices using an HDMI cable.

• If you connect an external device to the TV that uses an older version of HDMI, the video and audio may not work. If
this occurs, ask the manufacturer of the device about the HDMI version and, if it is out of date, request an upgrade.

• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.

• PC/DVI AUDIO IN input is not supported.

• For a set-top box connection using an HDMI cable, we highly recommend you connect the cable to the HDMI IN

1(STB) port.

• For an HDMI to DVI cable connection, you must use the HDMI IN 2(DVI) jack.

• If you connect a device to the HDMI IN 2(DVI) port using an HDMI to DVI cable, the audio will not work. DVI does not
transmit audio. You must add a separate audio connection.

• For PCs with DVI video out jacks, use an HDMI to DVI cable to connect the DVI out on the PC to the HDMI IN 2(DVI)
jack on the TV. Use the PC's speakers for audio.

To see Analog channels clearly,
prevent the antenna cables from
contacting the rear of the TV.

Connect the antenna cables
directly without using a divider.

Audio connection

Digital Audio System

OPTICAL

W RY

Cable

VHF/UHF

Antenna

R RBRG

or

PC connection

(Using an HDMI (to DVI) Cable)

DVI OUT

TV Side Panel

HDMI connection

Set-top box / Blu-ray player

HDMI OUT

USB connection

✎

The TV does not support
HDDs (Hard Disk Drives)
connected to the USB port.

TV Rear Panel

✎

W

The position of the port may
differ depending on the model.

✎

The Plasma TV may interfere with
amateur radio or AM radio.

Y

R BRG

R

W

R

W

✎

Using two-way radio mobile or
portable units, amateur radio, or

VIDEO OUT

AV connection

VCR

AUDIO OUT

R-AUDIO-L

COMPONENT OUT

PR PB Y

AUDIO OUT

R-AUDIO-L

Component connection

Blu-ray player / DVD

AM radio near your TV may cause
the TV to malfunction.

English - 6

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 6 2014-01-03  10:30:43

Display Modes for HDMI Input

The optimal resolution for the 4 series TVs is 1024 x 768@60Hz. For the 5 series, 1920 x 1080@60Hz. If you connect the
TV to a device such as a PC or Set-Top-Box using an HDMI input, we recommend that you set the video output of that
device to the optimal resolution of the TV. If that is not possible, you can set the device to one of the resolutions listed
below.

Mode Resolution

IBM

720 x 400 31.469 70.087 28.322 -/+

640 x 480 35.000 66.667 30.240 -/-

MAC

832 x 624 49.726 74.551 57.284 -/-

1152 x 870 68.681 75.062 100.000 -/-

640 x 480 31.469 59.940 25.175 -/-

640 x 480 37.861 72.809 31.500 -/-

640 x 480 37.500 75.000 31.500 -/-

800 x 600 37.879 60.317 40.000 +/+

800 x 600 48.077 72.188 50.000 +/+

800 x 600 46.875 75.000 49.500 +/+

1024 x 768 48.363 60.004 65.000 -/-

1024 x 768 56.476 70.069 75.000 -/-

1024 x 768 60.023 75.029 78.750 +/+

1152 x 864 67.500 75.000 108.000 +/+

VESA

DMT

1280 x 720 45.000 60.000 74.250 +/+

1280 x 800 49.702 49.702 83.500 -/+

1280 x

1024

1280 x

1024

1366 x 768 47.712 59.790 85.500 +/+

1440 x 900 55.935 59.887 106.500 -/+

1600 x
900RB

1680 x

1050

1920 x

1080

Horizontal

Frequency (KHz)

Vertical Frequency

(Hz)

Pixel Clock

Frequency (MHz)

63.981 60.020 108.000 +/+

79.976 75.025 135.000 +/+

60.000 60.000 108.000 +/+

65.290 59.954 146.250 -/+

67.500 60.000 148.500 +/+

Sync

Polarity (H

/ V)

1024 X

768

c c

c c

c c

c c

c c

c c

c c

c c

c c

c c

c c

c c

1920 X

1080

c

c

c

c

c

c

c

c

c

c

c

✎

The interlaced mode is not supported.

✎

The set might operate abnormally if you select a non-standard video format.

English - 7

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 7 2014-01-03  10:30:43

The Remote Control Buttons

✎

This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually
impaired persons.

Display and select the available video
sources.

Turns the TV on and off.

Press to access channels directly.

Press to select additional digital

channels being broadcasted by the

same station. For example, to select

channel ‘54-3’, press ‘54’, then press

‘-’ and ‘3’.

Adjusts the volume.

Turns the remote control light on or
off. When on, the buttons become
illuminated for a moment when
pressed. (Using the remote control
with this button set to On will reduce
the battery usage time.)

Return to the previous channel.

Cut off the sound temporarily.

Change channels.

Displays the channel list on the

screen.

View Media Play.

Quickly select frequently used

functions.

Moves the cursor, selects the on-

screen menu items, and changes the

values seen on the menu.

Return to the previous menu.

E-MANUAL: Displays the e-Manual.

P.SIZE: Lets you choose the picture

size.

CC: Controls the caption decoder.

B C D

Displays the main on-screen menu.

Displays the EPG (Electronic Program
Guide).

Displays information on the TV screen.

Exit the menu.

Use these buttons according to the
directions on screen.

Use these buttons in a specific feature.

English - 8

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 8 2014-01-03  10:30:43

Installing the Batteries Into the Remote

Installing batteries (Battery size: AAA)

✎

NOTE

• Install the batteries so that the polarity of the batteries (+/-)
matches the illustration in the battery compartment.

• Use the remote control within 23 feet of the TV.

• Bright light may affect the performance of the remote
control. Avoid using when near fluorescent lights or neon
signs.

• The color and shape may vary depending on the model.

Changing the Input Source

Source

When you are watching TV and you want to watch a movie on your DVD player or Blu-ray player or
switch to your cable box or STB satellite receiver, you need to change the Source.

1. Press the SOURCE button on your remote.

2. Select a desired external input source.

■ TV / HDMI1 / HDMI2/DVI / AV / Component

✎

You can only choose external devices that are connected to the TV. In the Source list, connected
inputs are highlighted.

How to Use Edit Name

Edit Name lets you associate a device name to an input source, for example, Blu-ray to HDMI 1 To access Edit Name,
press the TOOLS button when the Source list is displayed. The following selections appear under Edit Name:

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV
/ Blu-ray / HD DVD / DMA

Select the name of the device connected to each input jack to make your input source selection easier. When you view
the Source list,the device name and the input jack will be displayed together.

✎

If you have connected a PC to the HDMI IN 2(DVI) port with an HDMI cable, select PC under Edit Name to enter a
device name.

✎

If you have connected a PC to the HDMI IN 2(DVI) port with an HDMI to DVI cable, select DVI PC under Edit Name
to enter a device name.

✎

If you connected an AV device to the HDMI IN 2(DVI) por t with an HDMI to DVI cable, select DVI Devices under

Edit Name to enter a device name.

Information (in the Edit Name function)

Displays detailed information about the connected external device.

Configuring the Basic Settings in Initial Setup

When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in configuring
the TV’s basic settings. Plug the power cord into a wall outlet, and then press the POWER button to turn on the TV.
Configure your TV's basic settings in the initial setup by following the instructions on your TV's screen.

✎

Setup is available only when the Source is set to TV.

✎

If you are not using a cable box or satellite box, make you sure have connected the TV to an antenna or cable
connection before you turn on the TV.

If You Want to Re-run Setup...

O

MENU → System → Setup → ENTER

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 9 2014-01-03  10:30:44

E

English - 9

How to Navigate Menus

Your TV’s Main and Tools menus contains functions that
let you control the TV’s features. For example, in the Main
menu you can change the size and configuration of the
picture, its brightness, its contrast and so on. There are
also functions that let you control the TV’s sound, channel
configuration, energy use, and a host of other features.
To access the main, on-screen menu, press the MENU

m

) button on your remote. To access Tools menus, press

(
the TOOLS button. Tools menus are available when the

TOOLS menu Icon is displayed on the bottom right of the

screen.
The illustration below displays the buttons on the remote

you use to navigate the menus and select and adjust
different functions.

1 MENU button: Displays the main on-screen menu.
2 ENTER

E

buttons to move the cursor and highlight an item.
Use the Enter button to select an item or confirm the
setting.

and Direction buttons: Use the Direction

3 RETURN button: Returns to the previous menu.
4 EXIT button: Exits the on-screen menu.
5 TOOLS button: Displays the Tools menus when

available.

How to Operate the Main Menu (OSD - On Screen
Display)

The access steps may differ depending on the menu
option you select.

1

2

3
4
5

6
7

MENU

▲ / ▼

ENTER

▲ / ▼

◄ / ►

ENTER

EXIT

e

E

E

The main menu options appear
on the screen:

Picture, Sound, Broadcasting,
Applications, System, Support.

Select a main menu option on
the left side of the screen with
the ▲ or ▼ button.

Press ENTERE to access the
sub-menus.

Select the desired submenu with
the ▲ or ▼ button.

Adjust the value of an item
with the ◄ or ► button. The
adjustment in the OSD may
differ depending on the selected
menu.

Press ENTERE to confirm the
selection.

Press EXIT.

Using the TV’s Controller (Panel Key)

The TV’s Controller, a small joy stick like button on the rear left side of the TV, lets you control the TV without the remote
control. To open a function and view it on the screen or select a setting displayed on the screen, push the controller
backwards, forwards, left, or right. To confirm a setting after you have selected it, press up on the Controller.

Select Media Play

Function menu

TV Controller

The image is drawn as if
you are facing the front
side of the TV.

✎

To close the Menu, Media Play, or Source screens, press the Controller for more than 1 second.

✎

When selecting a function by moving the controller backwards, forwards, left, or right, be sure not to press the
controller. If you press it first, it will not operate properly when you move it.

✎

The product color and shape may vary depending on the model.

Remote control sensor

Select the Menu

Return

Power Off

Standby mode

Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be
safe and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are
away on vacation, for example). It is best to unplug the power cord.

English - 10

Select a Source

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 10 2014-01-03  10:30:45

Screen Display

How to View the e-Manual

You can find instructions for your TV’s features in the e-Manual in your TV. To use the e-Manual,
press the E-MANUAL button on your remote. Move the cursor using the right/left buttons to
highlight a main category. Use the up/down buttons to select a topic, and then press the ENTERE
button. The e-Manual displays the page you want to see. To change pages, use the right/left
buttons.

You can also access the e-Manual through the menu:

O

MENUm → Support → e-Manual → ENTER

✎

If you want to return to the e-Manual, press the E-MANUAL button on your remote.

✎

You can not use the Tr y Now function if the menu is not activated.

E

TV Screen: Displays the

program, movie, video, etc.

you are currently watching.

Basic Features

Changing the Preset Picture Mode

Adjusting Picture Settings

Changing the Picture Options

Changing the Preset Sound Modes

Adjusting Sound Settings

Index E Enter e Exit

}

Operation Buttons:

}

Blue (Index): Displays the index screen.

E

Enter: Select a category or sub-menu.

e

Exit: Exit the e-Manual.

How to toggle between an e-Manual topic and the corresponding OSD menu(s).

Basic Features > Changing the Preset Picture Mode (1/1)

❑Changing the Preset Picture Mode

■Picture Mode

t

MENUm → Picture → Picture Mode → ENTER

O

Picture modes apply preset adjustments to the picture. Select a mode using the

buttons, and then press ENTERE.

▲/▼

When connecting a PC, you can only select Entertain and Standard.

N

●

Dynamic: Suitable for a bright room.

●

Standard: Suitable for a normal environment.

for LED TV

●

Natural

: Suitable for an eye comfortable display.

●

Movie: Suitable for watching movies in a dark room.

●

Entertain: Suitable for watching movies and games.

It is only available when connecting a PC.

N

Try Now b Home { Zoom } Index L Page e Exit

a

✎

This function is not enabled in some menus.

E

Try Now

E-MANUAL

Picture

Picture Mode Standard

•Cell Light

•Contrast

•Brightness

•Sharpness

•Color

•Tint (G/R)

The category list. Press

l

or r button to select the
category you want.

Displays the sub-menu
list. Use the arrow buttons
on your remote to move
the cursor.

E

Press the ENTER
button to select the sub­menu you want.

10

95

45

50

50

G50 R50

Method 1 Method 2

E

1. If you want to use the menu that corresponds to an
e-Manual topic, press the red button to select Try

Now.

2. To return to the e-Manual screen, press the

E-MANUAL button.

1. Press the ENTER
“Do you want to execute this?” appears. Select
Yes, and then press the ENTERE button. The OSD

window appears.

2. To return to the e-Manual screen, press the

E-MANUAL button.

button when a topic is displayed.

English - 11

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 11 2014-01-03  10:30:49

Viewing the Contents

Basic Features > Changing the Preset Picture Mode (1/1)

❑Changing the Preset Picture Mode

■Picture Mode

t

MENUm → Picture → Picture Mode → ENTER

O

Picture modes apply preset adjustments to the picture. Select a mode using the

buttons, and then press ENTERE.

▲/▼

When connecting a PC, you can only select Entertain and Standard.

N

●

Dynamic: Suitable for a bright room.

●

Standard: Suitable for a normal environment.

for LED TV

●

Natural

: Suitable for an eye comfortable display.

●

Movie: Suitable for watching movies in a dark room.

●

Entertain: Suitable for watching movies and games.

It is only available when connecting a PC.

N

b

{

Home

Zoom

}

Index

a

Try Now

Operation Buttons:

a

Red (Try Now): Press to display the OSD menu that corresponds to the topic.

To return to the e-Manual screen, press the E-MANUAL button.

b

Green (Home): Moves to the e-Manual home screen.

{

Yellow (Zoom): Magnifies a screen.

}

Blue (Index): Displays the Index screen.

L

(Page): Moves to the previous or next page.

e

(Exit): Exit the e-Manual.

Using the Zoom mode

When you are viewing an e-Manual instruction page,
press the { Yellow (Zoom) to magnify the screen. You
can scroll through the magnified screen by using the u
or d buttons.

✎

To return the screen to normal size, press the

RETURN button.

Contents Area: Contains the topic

E

contents if you selected a sub-menu.
To move to the previous or next page,
press the l or r button.

L

e

Page

Exit

❑Changing the Preset Picture Mode

■Picture Mode

O

Picture modes apply preset adjustments to the picture. Select a mode using the

▲/▼

N

●

●

●

t

MENUm → Picture → Picture Mode → ENTER

buttons, and then press ENTERE.

When connecting a PC, you can only select Entertain and Standard.

Dynamic: Suitable for a bright room.

Standard: Suitable for a normal environment.

for LED TV

Natural

: Suitable for an eye comfortable display.

E

Move

U

How to search for a topic on the index page

1. Press the Blue (Index) button on the remote. The Index screen appears.

2. To search for a topic, press the left or right arrow button to select a letter. The Index displays a list of topics and

keywords that begin with the letter you selected.

3. Press the up or down arrow button to select a topic or keyword you want, and then press the ENTER

select a topic you want to see.

4. The e-Manual page with the topic appears.

✎

To close the Index screen, press the RETURN button.

E

button to

R

Return

English - 12

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 12 2014-01-03  10:30:50

Troubleshooting

If the TV seems to have a problem, first review this list of possible problems and solution. Also review the
Troubleshooting Section in the e-Manual. If none of the troubleshooting tips apply, visit www.samsung.com/support or
call Samsung customer Service at 1-800-SAMSUNG (1-800-726-7864).

Issues Solutions and Explanations

Flickering and Dimming If your Samsung Television is flickering or dimming sporadically, you may need

Component Connections / Screen
Color

Screen Brightness If you find that the colors on your Samsung TV are correct but just a little too dark

Unwanted Powering Off If your Samsung TV appears to turn off by itself, there may be an issue with either

Trouble Powering On

Cannot Find a Channel

✎

For detailed troubleshooting information, watch the troubleshooting videos at www.samsung.com/spsn

to disable some of its energy efficient features like the Eco Sensor or the Energy
Saving feature. Follow the steps below with your remote to turn these features off
or on.

• Energy Saving: User Menu → System → Eco Solution → Energy Saving

• Eco Sensor: User Menu → System → Eco Solution → Eco Sensor
If you find that the color on your Samsung television’s screen is not correct or black

and white, first run a Self Diagnosis on the TV to make sure there are no device
issues.

• Self Diagnosis: User Menu → Support → Self Diagnosis → Picture Test
If the problem does not appear in the Test Picture, making sure :

• Your connections are all consistent. For example, if you’ve used the AV In jack on
your TV, make sure you have used the AV Out jack on your video source.

• You have connected your devices to the correct jacks. For example, if you use
the Component jacks, labeled Pb, Pr, and Y, to connect your TV and video
source, make sure you have connected the blue Pb jack on the video source to
the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on
the TV, and the yellow Y jack on video source to the yellow Y jack on the TV.

or bright, try adjusting the following settings in the Picture option of the Main
menu:

• Cell Light, Contrast, Brightness, Sharpness, Color, Tint (G/R) and so on.

your Timer settings or your Eco friendly No Signal Power Off feature.
First make sure the Sleep Timer is not accidentally set. The sleep timer turns the TV

off after a certain period of time.

• Sleep Timer: User Menu → System → Time → Sleep Timer

If the Sleep Timer is not activated, you may have engaged the No Signal Power Off
or Auto Power Off feature. To turn these features off, follow the steps below with
your remote.

• No Signal Power Off : User Menu → System → Eco Solution → No Signal Power
Off

• Auto Power Off: User Menu → System → Eco Solution → Auto Power Off

Before you turn the TV on, find the red light on the bottom right or left of your TV.
Press the power button on the TV or remote. The light should blink about 5 times
before the TV turns on.

If you find that you are having trouble powering on your Samsung television, there
are a number of things to check before making a call to the service department.

• If you happen to be using the TV as a monitor and the stand-by light only blinks
for a few seconds when you press the power button, your PC is in sleep mode.
To take your PC out of sleep mode, press a key on your keyboard or move the
mouse. Then try turning your TV on.

If you’re sure your power cord, remote control, and PC are functioning properly,
you may be having a cable issue. If you have a cable or satellite box, your TV may
appear to be off because the cable or satellite box is not outputting a signal. To
test the signal output of your cable or satellite box, press the guide or info button
on the cable or satellite box remote control. If the screen displays the guide or info
data, the problem is caused by the box.

Re-run Setup (Go to Menu - System - Setup) or run Auto Program. (Go to MENU -

Broadcasting - Auto Program).

English - 13

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 13 2014-01-03  10:30:50

Issues Solutions and Explanations

First, perform the Picture Test and to see if your TV is properly displaying the test
image.

Poor picture

• Go to MENU - Support - Self Diagnosis - Picture Test
If the test image is properly displayed, the poor picture may be caused by the

source or signal.

The TV image does not look as
good as it did in the store.

Store displays are typically tuned to digital, HD (high definition) channels.

• If you have an analog cable/satellite box, upgrade to a digital set top box. Use
HDMI or Component cables to deliver HD (high definition) picture quality.

• Cable/Satellite subscribers: Try HD channels from the channel line up.

• Air/Cable Antenna connection: Try HD channels after performing an Auto
program.

✎ Many HD channel programs are up scaled from SD (Standard Definition)

content. Look for a channel that is broadcasting true HD content.

• Adjust the Cable/Set top box video output resolution to 1080i or 720p.

The picture is distorted:
macroblock error, small block,
dots, pixelization.

• The compression of video contents may cause picture distortion, especially in
programs with fast moving pictures such as sports programs and action movies.

• A weak signal can cause picture distortion. This is not a TV problem.

• Mobile phones used close to the TV (within 3.3 ft) may cause noise in the
picture on analog and digital channels.

Color is wrong or missing. • If you’re using a Component connection, make sure the component cables are

connected to the correct jacks. Incorrect or loose connections may cause color
problems or a blank screen.

There is poor color or brightness.

• Adjust the Picture options in the TV menu. (go to Picture Mode / Color /
Brightness / Sharpness)

• Adjust the Energy Saving option in the TV menu (go to MENU - System - Eco
Solution - Energy Saving)

• Try resetting the picture to the default picture settings. (go to MENU - Picture -
Reset Picture)

There is a dotted line on the edge
of the screen.

• If the picture size is set to Screen Fit, change it to 16:9.

• Change the cable/satellite box resolution.

The picture is black and white. • If you are using an AV composite input, connect the video cable (yellow) to the

Green jack of Component input 1 on the TV.

When changing channels, the
picture freezes or is distorted or
delayed.

• If the TV is connected to a cable box, reset the box. (Disconnect and then
reconnect the AC cord, and then wait until the cable box reboots. It may take
up to 20 minutes.)

• Set the output resolution of the cable box to 1080i or 720p.

First, perform the Sound Test to determine if your TV audio is operating properly.

Sound Problem

• Go to MENU - Support - Self Diagnosis - Sound Test
If the audio is OK, the sound problem may be caused by the source or signal.

There is no sound or the sound is
too low at maximum volume.

The picture is good but there is
no sound.

• Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.)
connected to your TV.

• Set the Speaker Select option to TV Speaker in the Sound menu.

• If you are using an external device, check the device’s audio output option (Ex.
You may need to change your cable box’s audio option to HDMI if you have the
box connected to your TV using an HDMI cable.).

• If you are using a DVI to HDMI cable, a separate audio cable is required.

• Reboot the connected device by disconnecting and then reconnecting the
device’s power cable.

The speakers are making an
inappropriate noise.

• Check the cable connections. Make sure a video cable is not connected to an
audio input.

• For Antenna or Cable connections, check the signal information. A weak signal
may cause sound distortion.

• Perform the Sound Test as explained above.

English - 14

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 14 2014-01-03  10:30:50

Issues Solutions and Explanations

No Picture, No Video

The TV will not turn on. • Make sure the AC power cord is securely plugged into the wall outlet and the

T V.

• Make sure the wall outlet is working.

• Try pressing the POWER button on the TV to make sure the problem is not
the remote control. If the TV turns on, refer to ‘Remote control does not work’
below.

The TV turns off automatically.

• Ensure the Sleep Timer is set to Off in the System menu.

• If your PC is connected to the TV, check your PC's power settings.

• Make sure the AC power cord is plugged in securely to the wall outlet and the
T V.

• When you are watching TV programs from an antenna, the TV will turn off after
10 - 15 minutes if there is no signal.

There is no picture/video. • Check the cable connections. (Remove and reconnect all cables connected to

the TV and external devices).

• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to
match the connections to the TV input. For example, if an external device’s
output is HDMI, it should be connected to an HDMI input on the TV.

• Make sure your connected devices are powered on.

• Be sure to select the TV’s correct source by pressing the SOURCE button on the
remote control.

• Reboot the connected device by disconnecting and then reconnecting the
device’s power cable.

Antenna (Air / Cable) Connection

The TV is not receiving all
channels.

• Make sure the coaxial cable is connected securely.

• Run Auto Program to add available channels to the channel list. There are 3
options, STD, HRC and IRC. Most cable systems use STD.

• Verify the antenna is positioned correctly.

No Caption on digital channels.

• Check the Caption Setup menu. Try changing Caption Mode Service1 to CC1.

• Some channels may not have caption data.

The picture is distorted:
macroblock, error, small block,
dots, pixelization.

• The compression of video contents may cause picture distortion, especially in
programs with fast moving pictures such as sports programs and action movies.

• A weak signal can cause picture distortion. This is not a TV problem.

Others

Purple/green rolling horizontal
bars and buzzing noise from the
TV speakers with Component

• Remove the left and right audio connections from the set-top-box. If the
buzzing stops, this indicates that the set-top-box has a grounding issue. Replace
the Component video cables with an HDMI connection.

cable connection.
Plasma TV is making humming

noise.

• Plasma TVs typically make a soft humming sound. This is normal. It’s caused by
the electrical charges that are used to create the images on the screen.

• If the humming sound is loud, you may have set the brightness on the TV too
high. Try setting the brightness lower.

• You can also have loud humming if the back of your Plasma TV is too close to a
wall or other hard surface. Also try rerouting your connection cables.

• Improper installation of the wall mount can create excessive noise.

English - 15

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 15 2014-01-03  10:30:50

Issues Solutions and Explanations

The picture will not display in full
screen.

Image Retention (Burn In) Issue. • To minimize the possibility of screen burn, this unit is equipped with Pixel Shift

The remote control does not
work.

The cable/set top box remote
control does not turn the TV on
or off, or adjust the volume.

A “Mode Not Supported”
message appears.

Caption on the TV menu is
greyed out.

There is a plastic smell from the
T V.

TV Signal Information is
unavailable in the Self Diagnosis
Test menu.

TV is tilted to the right or left
side.

The Broadcasting menu is greyed
out (unavailable).

Your settings are lost after 30
minutes or every time the TV is
turned off.

You have intermittent loss of
audio or video.

The PIP menu is not available. • PIP functionality is only available when you are using an HDMI or Component

You see small particles when you
look closely at the edge of the
frame of the TV.

The POP (the TV’s internal
banner ad) appears on the
screen.

The message “This file may not
be played properly.” appears.

✎

Some functions and pictures shown in this manual are available on specific models only.

✎

To keep your TV in optimum condition, upgrade to the latest firmware on the Samsung web site by USB (Go to
samsung.com → Suppor t).

• HD channels will have black bars on either side of the screen when displaying
up scaled SD (4:3) contents.

• Black bars will appear on the top and bottom of the screen when you watch
movies that have aspect ratios different from your TV.

• Adjust the picture size option on your external device or change the TV to full
screen.

screen burn reduction technology. Pixel Shift lets you set the picture so it moves
slightly up and down (Vertical Line) and side to side (Horizontal Dot). The
regular, slight movement of the picture reduces screen burn in.

• Replace the remote control batteries. Make sure you insert them with the plus
and minus ends in the correct direction.

• Clean the transmission window located on the top of the remote control.

• Try pointing the remote control directly at the TV from 5~6 feet away.

• Program the Cable/Set top box remote control to operate the TV. Refer to the
Cable/Set top box user manual for the SAMSUNG TV code.

• Check the supported resolution of the TV and adjust the external device’s
output resolution accordingly. Refer to resolution settings in this manual.

• You cannot select Caption in the TV menu when watching content from a
device connected via HDMI or Component.

• Caption must be activated on the external device.

• This smell is normal and will dissipate over time.

• This function is only available for digital channels the TV receives from an
Antenna / RF/Coax connection.

• Remove the stand base from the TV and reassemble it.

• The Broadcasting menu is only available when you select the TV source.

• If TV is in the Store Demo mode, it will reset audio and picture settings every 30
minutes. If you want to change the settings from Store Demo mode to Home

Use, press the SOURCE button to select TV mode, and go to MENU → Support
→ Use Mode.

• Check the cable connections and reconnect them.

• Loss of audio or video can be caused by using overly rigid or thick cables. Make
sure the cables are flexible enough for long term use. If mounting the TV to the
wall, we recommend using cables with 90 degree connectors.

source.

• This is part of the product’s design and is not a defect.

• Go to MENU → Support → Use Mode, and then select Home Use.

• This may appear because the content has a high bit rate. The content generally
will play, but could experience some playability issues.

English - 16

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 16 2014-01-03  10:30:51

Installing the Wall Mount (Optional)

Wall or Ceiling Mounting

If you mount this product on a wall, it should be mounted only as recommended by the manufacturer.
Unless it is correctly mounted, the product may slide or fall, causing serious injury to a child or adult, and
serious damage to the product.

Installing the Wall Mount Kit

The wall mount kit (sold separately) lets you mount the TV on the wall. For detailed information about installing the wall
mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall
mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if
you elect to install the wall mount on your own.

To order the wall mount, contact Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864).

Wall Mount Kit Specifications (VESA)

Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than
plaster board, please contact your nearest dealer for additional information. If you install the TV on a ceiling or slanted
wall, it may fall and result in severe personal injury.

✎

NOTE

• Standard dimensions for wall mount kits are shown in the table below.

• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.

• Do not use screws that do not comply with the VESA standard screw specifications.

• Do not use screws that are longer than the standard length or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.

• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may
differ depending on the wall mount specifications.

• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to
personal injury. Samsung is not liable for these kinds of accidents.

• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is
used or the consumer fails to follow the product installation instructions.

• Do not mount the TV at more than a 15 degree tilt.

• Always have two people mount the TV on a wall.

Product Family

PDP-TV

✎

Remove the screws in the mounting holes before you install the wall mount.

TV size in

43~51 400 X 400

60~64 600 X 400

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due
to electric shock.

VESA screw hole specs (A

inches

* B) in millimeters

Standard Screw Quantity

M8 4

English - 17

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 17 2014-01-03  10:30:51

Securing the TV to the Wall

Wall

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your
children do not hang over or destabilize the TV. Doing so may cause the TV to tip over, causing
serious injuries or death. Follow all safety precautions provided in the included Safety Flyer with
your TV. For added stability and safety, you can purchase and install the anti-fall device as described
below.

The TV-Holder Kit (Sold Separately):

The parts below are included in the TV Holder kit. In addition, you need to provide a wood screw, a screw and molly,
or other screw appropriate for the wall or cabinet you intend to secure the TV-Holder string to. We recommend a size
M4xL20 wood screw.

TV-Holder (BN96-15753A) Screw (M8 X L19)

Installing the TV-Holder

1. Remove the screw attached to the back of your TV, and then connect the TV-Holder to the TV with the screw

included in the TV-Holder Kit that is designated for your TV.

✎

Make sure to use only the appropriate supplied screw. If you use a different screw, you can damage your TV.

2. Firmly fasten the screw you provided (size M4 x L20 or similar) to the wall or cabinet where the TV is to be installed.

✎

If you fasten the screw to the wall, we recommend you drive the screw into a stud. If that is not possible, use a
molly to anchor the screw.

3. Tie the TV-Holder cord to the screw fastened to the wall or cabinet so that the TV is fixed. See the illustrations

below.

✎

Install the T V close to the wall so that it does not fall.

✎

When attaching the TV-Holder cord to the wall, tie the cord level with the ground or slanted downwards for
safety purposes.

✎

Check the cord occasionally to make sure it is secure.

✎

Before moving the TV, detach the connected cord first.

4. Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If you

have any doubt about the security of your connections, contact a professional installer.

To purchase the TV-Holder Kit, contact Samsung Customer Care

✎

In the United States: 1-800-SAMSUNG (1-800-726-7864)

✎

In Canada: 1-800-SAMSUNG (1-800-726-7864)

English - 18

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 18 2014-01-03  10:30:51

Anti-theft Kensington Lock

A Kensington Lock is a device you can use to physically fix
your TV in place when using it in a public place. You wrap
the Kensington Lock’s cable around a large, immobile
object and then attach the lock to the Kensington slot on
the back of the TV.

The appearance and locking method may differ from
the illustration below depending on the manufacturer.
Refer to the manual provided with the Kensington Lock
for additional information on proper use. The Kensington
Lock is not supplied by Samsung.

✎

Please find a “K” icon on the rear of the TV. A
Kensington slot is beside the “K” icon.

✎

The position and color may differ depending on the
model.

<Optional>

To lock the product, follow these steps:

1. Wrap the Kensington lock cable around a large,

stationary object such as desk or chair.

2. Slide the end of the cable with the lock attached

through the looped end of the Kensington lock cable.

3. Insert the locking device into the Kensington slot on

the product.

4. Lock the lock.

✎

These are general instructions. For exact instructions,
see the User manual supplied with the locking device.

✎

The locking device has to be purchased separately.

Storage and Maintenance

✎

If a sticker was attached to the TV screen, some
debris can remain after you remove the sticker.
Please clean the debris off before watching T V.

✎

The exterior and screen of the product can get
scratched during cleaning. Be sure to wipe the
exterior and screen carefully using a soft cloth to
prevent scratches.

Do not spray water directly onto
the product. Any liquid that goes
into the product may cause a
failure, fire, or electric shock.

Licenses

Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.

Manufactured under a license from U.S.
Patent No’s: 5,956,674, 5,974,380,
5,978,762, 6,487,535, 6,226,616,
7,212,872, 7,003,467, 7,272,567,
7,668,723, 7,392,195, 7,930,184,
7,333,929 and 7,548,853. DTS, the
Symbol, and DTS and the Symbol together
are registered trademarks & DTS Premium
Sound | 5.1 is a trademark of DTS, Inc.
©2012 DTS, Inc. All Rights Reserved.

Manufactured under a license from U.S.
Patent No’s: 6,285,767, 8,027,477,
5,319,713, 5,333,201, 5,638,452,
5,771,295, 5,970,152, 5,912,976,
7,200,236, 7,492,907, 8,050,434,
7,720,240, 7,031,474, 7,907,736 and
7,764,802. DTS, the Symbol, and DTS
and the Symbol together are registered
trademarks & DTS Studio Sound is a
trademark of DTS, Inc. ©2012 DTS, Inc. All
Rights Reserved.

The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of
HDMI Licensing LLC in the United States
and other countries.

DivX Certified® to play DivX® video up to
HD 1080p, including premium content.

ABOUT DIVX VIDEO: DivX® is a digital video format created by
DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX
Certified® device that plays DivX video. Visit divx.com for more
information and software tools to convert your files into DivX
videos.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device
must be registered in order to play purchased DivX Video-on­Demand (VOD) movies. To obtain your registration code, locate
the DivX VOD section in your device setup menu. Go to vod.divx.
com for more information on how to complete your registration.
Covered by one or more of the following U.S. patents : 7,295,673;
7,460,668; 7,515,710; 7,519,274

DivX®, DivX Certified® and associated logos are trademarks of
Rovi Corporation or its subsidiaries and are used under license.

Open source license notice

In the case of using open source software, Open Source Licenses
are available on the product menu.

Open Source License Notice is written only English.

Clean the product with a soft
cloth dipped in a small amount
of water. Do not use a flammable
liquid (e.g. benzene, thinners) or
a cleaning agent.

English - 19

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 19 2014-01-03  10:30:53

Specifications

Environmental
Considerations

Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity

Model Name PN43F4500 / PN43F4550 PN51F4500 / PN51F4550

Display Resolution 1024 X 768

Screen Size
(Diagonal)

Sound
(Output)

Dimensions (W x H x D)
Body

With stand

Weight
Without Stand
With Stand

Model Name PN51F5300 / PN51F5350 PN60F5300 / PN60F5350 PN64H5000

Stand Swivel (Left / Right) -20˚ ~ 20˚

Display Resolution 1920 X 1080 1920 X 1080 (Black & White) 1920 x 1080 (Black & White)

Screen Size
(Diagonal)

Sound
(Output)

Dimensions (W x H x D)
Body

With stand

Weight
Without Stand
With Stand

(1009.7 x 698.8 x 235.0 mm)

(50.7 measured diagonally)

46.6 x 27.6 x 2.1 inches

(1185.2 x 702.1 x 55.7 mm)

46.6 x 31.1 x 12.0 inches

(1185.2 x 792.1 x 307.2 mm)

39.2lbs (17.8kg)

43.2lbs (19.6kg)

43” Class

(43.0 measured diagonally)

39.7 x 24.3 x 2.1 inches

(1009.7 x 617.5 x 55.7 mm)

39.7 x 27.5 x 9.2 inches

29.9lbs (13.6kg)

33.0lbs (15.0kg)

51” Class

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing

(50.6 measured diagonally)

10W X 2

(1185.2 x 702.1 x 55.7 mm)

(1185.2 x 783.0 x 235.0 mm)

60” Class

(59.9 measured diagonally)

10W x 2

54.6 x 32.4 x 2.1 inches

(1388.3 x 823.3 x 55.7 mm)

54.6 x 36.3 x 14.7 inches

(1388.3 x 924.1 x 375.5 mm)

58.8lbs (26.7kg)

64.5lbs (29.3kg)

51” Class

46.6 x 27.6 x 2.1 inches

46.6 x 30.8 x 9.2 inches

39.0lbs (17.7kg)

42.1lbs (19.1kg)

64” Class

(64.0 measured diagonally)

58.1 x 34.2 x 2.1 inches

(1478.0 x 870.0 x 55.7 mm)

58.1 x 38.0 x 14.7 inches

(1478.0 x 967.0 x 375.5 mm)

70.9lbs (32.2kg)

76.5lbs (34.8kg)

✎

Design and specifications are subject to change without prior notice.

✎

This device is a Class B digital apparatus.

✎

For information about the power supply and more information about power consumption, refer to the label
attached to the product.

✎

Typical power consumption is measured according to Energy Star Program requirements for Televisions.

Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278 - 0799

English - 20

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 20 2014-01-03  10:30:53

JACK PANEL DETAIL / REAR VIEW

5

1

6

4

2

3

(Unit: inches)

Model name

PN43F4500 / PN43F4550 16.8 1.3 2.5 28.4 15.7 15.7

PN51F4500 / PN51F4550 19.5 1.4 3.1 35.0 15.7 15.7

PN51F5300 / PN51F5350 19.5 1.4 3.1 35.0 15.7 15.7

PN60F5300 / PN60F5350 20.4 1.0 6.7 42.0 23.6 15.7

PN64H5000 21.8 1.7 6.9 42.8 23.6 15.7

1 2 3 4 5 6

NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to
the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.

© 2014 Samsung Electronics America, Inc

Supported Videos Formats

File Extention Container Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Audio Codec

AC3

LPCM

ADPCM

(IMA, MS)

AAC

HE-AAC

WMA

DD+

MPEG
(MP3)

DTS (Core)

G.711(A-Law,

μ-Law)

*.avi / *.mkv

*.asf / *.wmv

*.mp4 / *.3gp

*.vro / *.mpg
*.mpeg / *.ts

*.tp / *.trp

*.mov / *.flv

*.vob / *.svi

*.divx

✎

Other Restrictions

AVI

MKV

ASF
MP4
3GP

MOV

FLV
VRO
VOB

PS
TS

DivX 3.11/4/5/6

MPEG4 SP/ASP

H.264 BP/MP/HP

Motion JPEG 640 x 480 8

Window Media Video v9

MPEG2

MPEG1

1920 x 1080

6~30

1920 x 1080 30

30

• Video content will not play, or not play correctly, if there is an error in the content or the container.

• Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible Frame/sec
listed in the table above.

• If the Index Table contains an error, the Seek (Jump) function is not supported.

• Some USB/digital camera devices may not be compatible with the TV.

• The menu may display slowly if the video you are watching has a bit rate over 10Mbps.

English - 21

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 21 2014-01-03  10:30:54

Video decoder Audio decoder

• Supports up to H.264, Level 4.1 (FMO/ASO/RS are
not supported.)

• Frame rate :

- Below 1280 x 720: 60 frame max

- Above 1280 x 720: 30 frame max

• VC1 AP L4 is not supported.

• GMC 2 or higher is not supported.

Supported Subtitle Formats

• External
Name File extension

MPEG-4 timed text .ttxt

SAMI .smi

SubRip .srt

SubViewer .sub

Micro DVD .sub or .txt

SubStation Alpha .ssa

Advanced SubStation Alpha .ass

Powerdivx .psb

• WMA 10 Pro supports up to 5.1 channel and M2
profile.

• WMA 10 Pro supports up to 5.1 channel.

• WMA lossless audio is not supported.

• Vorbis supports up to 2ch.

• DD+ supports up to 5.1 channel.

• Internal

Name Container Format

Xsub AVI Picture Format

SubStation Alpha MKV Text Format

Advanced SubStation Alpha MKV Text Format

SubRip MKV Text Format

MPEG-4 Timed text MP4 Text Format

Supported Photos Formats

File Extension Type Resolution

*.jpg

*.jpeg
*.bmp BMP 4096 X 4096
*.mpo MPO 15360 X 8640

✎

The MPO type file does not support Zoom,
Rotate and Slide Show Effect functions.

JPEG 15360 X 8640

Supported Music Formats

File Extension Type Codec Remark

*.mp3 MPEG

*.m4a
*.mpa

*.aac

*.flac FLAC FLAC Supports up to 2ch.

*.ogg OGG Vorbis Supports up to 2ch.

*.wma WMA WMA

*.wav wav wav

*.mid

*.midi

MPEG4 AAC

MPEG1 Audio

Layer 3

WMA 10 Pro supports up to

5.1 channel and M2 profile.
(WMA lossless audio is not
supported.)

midi midi type 0 and type 1

English - 22

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 22 2014-01-03  10:30:54

Important Warranty Information Regarding Television Format Viewing

✎

See the warranty card for more information on warranty terms.

Wide screen format PDP Displays (with 16:9 aspect ratios, the ratio of the screen width to height) are primarily designed
to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen
16:9 ratio format, or expanded to fill the screen if your model offers this feature, with the images constantly in motion.
Displaying stationary graphics and images on the screen, such as the dark sidebars on non-expanded standard format
television video and programming, should be limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market crawls, video game displays, station
logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying
stationary images for more than 5% of total viewing time can cause uneven aging of your PDP display and leave subtle,
but permanent burned-in ghost images in the PDP picture. To avoid this, vary the programming and images, and
primarily display full screen moving images, not stationary patterns or dark bars. On PDP models that offer picture sizing
features, use these controls to view different formats as a full screen picture.

Be careful in the selection of television formats you use for viewing and the amount of time you view them. Uneven
PDP aging as a result of format selection and use, as well as burned in images, are not covered by your Samsung limited
warranty.

• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with

Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained
herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products
purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period
originally specified, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this
Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented
to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions
covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal
use of the product.

Exclusions include, but are not limited to, any originally specified provisions for in-home or on-site services, minimum
or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

‐ In the United States : 1-800-SAMSUNG (1-800-726-7864)
‐ In Canada : 1-800-SAMSUNG

Warranty Information

SAMSUNG BRAND PRODUCTS

LIMITED WARRANTY TO ORIGINAL PURCHASER

This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton
to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and
workmanship for the limited warranty period shown in the table below.

Categories Parts Labor Size Service

LCD/LED TV 1 Year 1 Year

Plasma Display 1 Year 1 Year All Carry-In or In Home
Projector

(Excluding Lamp **)
PICO & LED

Pocket Projector

* 90 days parts and labor for commercial use.
** 180 Days after Purchasing and 600 Hours of Use Lamp on Projector

2 Year 2 Year All Carry-In or Pick up

1 Year 1 Year All Carry-In or Pick up

40”and Larger Carry-In or In Home

37”and Smaller Carry-In

English - 23

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 23 2014-01-03  10:30:54

This limited warranty begins on the original date of
purchase, and is valid only on products purchased and
used in the United States. To receive warranty service,
the purchaser must contact SAMSUNG for problem
determination and service procedures. Warranty service
can only be performed by a SAMSUNG authorized service
center. The original dated bill of sale must be presented
upon request as proof of purchase to SAMSUNG or
SAMSUNG's authorized service center.

SAMSUNG will repair or replace this product, at our
option and at no charge as stipulated herein, with new or
reconditioned parts or products if found to be defective
during the limited warranty period specified above.
All replaced parts and products become the property
of SAMSUNG and must be returned to SAMSUNG.
Replacement parts and products assume the remaining
original warranty, or ninety (90) days, whichever is longer.

Certain products are eligible for In-home service at
Samsung’s discretion. To receive in-home service, the
product must be unobstructed and accessible to service
personnel. If during in-home service, repair cannot not
be completed, it may be necessary to remove, repair
and return the product. If in-home service is unavailable,
SAMSUNG may elect, at our option, to provide for
transportation of our choice to and from a SAMSUNG
authorized service center. Otherwise, and for 37" and
smaller LCD/LED TV, transportation to and from the
SAMSUNG authorized service center is the responsibility
of the purchaser.

This limited warranty covers manufacturing defects in
materials and workmanship encountered in normal, and
except to the extent otherwise expressly provided for
in this statement, noncommercial use of this product,
and shall not apply to the following, including, but not
limited to: damage which occurs in shipment; delivery and
installation; applications and uses for which this product
was not intended; altered product or serial numbers;
cosmetic damage or exterior finishes; accidents, abuse,
neglect, fire, water, lightning or other acts of nature;
use of products, equipment, systems, utilities, services,
parts, supplies, accessories, applications, installations,
repairs, external wiring or connectors not supplied or
authorized by SAMSUNG which damage this product or
result in service problems; incorrect electrical line voltage,
fluctuations and surges; customer adjustments and failure
to follow operating instructions, cleaning, maintenance
and environmental instructions that are covered and
prescribed in the instruction book; reception problems
and distortion related to noise, echo, interference or other
signal transmission and delivery problems; brightness
related to normal aging, or burned-in images. SAMSUNG
does not warrant uninterrupted or error-free operation of
the product.

THERE ARE NO EXPRESS WARRANTIES OTHER THAN
THOSE

LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, SHALL APPLY AFTER THE EXPRESS
WARRANTY PERIODS STATED ABOVE, AND NO OTHER
EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY
PERSON, FIRM OR CORPORATION WITH RESPECT TO
THIS PRODUCT SHALL BE BINDING ON SAMSUNG.
SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE
OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER
BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES CAUSED BY THE
USE, MISUSE OR INABILITY TO USE THIS PRODUCT,
REGARDLESS OF THE LEGAL THEORY ON WHICH THE
CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR
SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG
BE GREATER IN AMOUNT THAN THE PURCHASE
PRICE OF THE PRODUCT SOLD BY SAMSUNG AND
CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING
THE FOREGOING, PURCHASER ASSUMES ALL RISK
AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO
PURCHASER AND PURCHASER’S PROPERTY AND TO
OTHERS AND THEIR PROPERTY ARISING OUT OF THE
USE, MISUSE OR INABILITY TO USE THIS PRODUCT
SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE
NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY
SHALL NOT EXTEND TO ANYONE OTHER THAN
THE ORIGINAL PURCHASER OF THIS PRODUCT, IS
NONTRANSFERABLE AND STATES YOUR EXCLUSIVE
REMEDY.

Some states do not allow limitations on how long an
implied warranty lasts, or the exclusion or limitation
of incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This
warranty gives you specific legal rights, and you may also
have other rights which vary from state to state. To obtain
warranty service, please contact SAMSUNG at:

Samsung Electronics America, Inc.

85 Challenger Road

Ridgefield Park, NJ 07660-2112

1-800-SAMSUNG (7267864) – www.samsung.com

1-800-749-0260: Projectors only

English - 24

[PH4500-5000-ZA]BN68-05661A-00ENG.indb 24 2014-01-03  10:30:54