Samsung PN42B430P2DXZA User Manual [en, es]

Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung.

Country

U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us

CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca

Customer Care Center 

Web Site Address

Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511

Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada

Samsung Electronique Canada Inc., Service à la Clientèle 55 Standish Court Mississauga, Ontario L5R 4B2 Canada

Plasma TV

user manual

BN68-02025A-00

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please

ww.samsung.com/register

Model Serial No.

Important Warranty Information Regarding Television Format Viewing

Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary

images that exceed the above guidelines can cause uneven aging of PDP Displays that leave subtle, but permanent burned-in ghost images in the PDP picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars.

On PDP models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.

English - 2

English - 3

User Instructions

Screen Image retention

Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 24 of this manual to reduce the degree of brightness and contrast of the screen when displaying a still image.

Altitude

The PDP can only operate normally at heights under 6500ft.

Heat on the top of the Plasma TV

The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching the upper part of the product.

The product is making a ‘cracking’ noise.

A ‘cracking’ noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or humidity. This is normal and not a defect of the unit.

Cell Defects

The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

Avoid operating the TV at temperatures below 41°F (5°C)

A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects to the screen. Damages caused by the above effect are not covered by the Warranty.

After-images on the Screen.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images for a long time.

Warranty

Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty.

Contents

Connecting and Preparing Your TV

English

List of Features ..........................................................................5

■

Checking Parts ..........................................................................5

■

Using the Stand-Base ...............................................................5

■

Viewing the Control Panel .........................................................6

■

Viewing the Connection Panel...................................................7

■

Remote Control .........................................................................8

■

Connections

Connecting VHF and UHF Antennas .........................................9

■

Connecting Cable TV ................................................................9

■

Connecting a DVD / Blu-Ray Player or Cable Box / Satellite

■

receiver (Set-Top Box) via HDMI ............................................. 11

Connecting a DVD /Blu-Ray Player or Cable Box / Satellite

■

receiver (Set-Top Box) via DVI ................................................ 11

Connecting a DVD / Blu-Ray Player or Cable Box / Satellite

■

receiver (Set-Top Box) via Component cables ........................ 12

Connecting a Camcorder ........................................................12

■

Connecting a VCR ...................................................................13

■

Connecting a Digital Audio System .........................................14

■

Connecting an Amplier / DVD Home Theater ........................14

■

Connecting a PC .....................................................................15

■

Operation

Turning the TV On and Off ......................................................16

■

Changing Channels ................................................................. 16

■

Adjusting the Volume ...............................................................16

■

Using the TOOLS Button .........................................................17

■

Viewing the Display .................................................................17

■

Viewing the Menus ..................................................................18

■

Plug & Play Feature ................................................................19

■

Picture Control

Changing the Picture Settings ................................................. 22

■

Sound Control

Changing the Sound Settings ..................................................26

■

Function Description

Conguring the Setup Menu ....................................................27

■

Setting the Time ......................................................................31

■

Source List / Edit Name ...........................................................32

■

Using Your TV as a Computer (PC) Display ............................32

■

PC Display

Display Modes ......................................................................... 33

■

Support .................................................................................... 33

■

Anynet

Connecting Anynet+ Devices ..................................................35

■

Troubleshooting for Anynet

■

+ ...................................................38

Appendix

Troubleshooting .......................................................................39

■

Preparation before installing the Wall-Mount ...........................40

■

How to attach the Stand-Base .................................................40

■

Securing the TV to the Wall .....................................................41

■

Wall Mount Kit Specications (VESA) .....................................42

■

Specications ..........................................................................43

■

Dimensions (PN42B430P2D) .................................................. 44

■

Dimensions (PN50B430P2D) .................................................. 45

■

Channel Control

Storing Channels ..................................................................... 20

■

Managing Channels ................................................................20

■

Symbol

Press Note One-Touch Button TOOLS

N O T

English - 4

English - 5

Connecting and Preparing Your TV

List of Features

Adjustable picture settings that can be stored in the TV’s memory.

• Automatic timer to turn the TV on and off.

• A special sleep timer.

• V-Chip function.

• Excellent Digital Interface & Networking :

• With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver (Set-Top Box) needed.

HDMI/DVI connection of your PC to this TV.

• SRS TruSurround HD provides a virtual surround system.

•

Checking Parts

Please make sure the following items are included with your TV. If any items are missing, contact your dealer.

The items' color and shape may vary depending on the model.

Remote Control

(BN59-00856A) /

AAA Batteries (4301-000103)

Ferrite Core for Power Cord

(3301-001305)

Ferrite Core

The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug.

Power Cord

(3903-000144

Ferrite Core

for Side-AV

(3301-001201)

)

Owner’s Instructions /

Quick Setup Guide

Cover-Bottom

(Refer to page 40)

Warranty Card /

Safety Guide Manual

(Not available in all loca-

Holder-Ring (4ea) (Refer to page 40)

Using the Stand-Base

Two or more people should carry the PDP. Never lay the PDP on the oor

because of possible damage to the screen. Always keep the PDP upright. The PDP can rotate 20 degrees in right and left directions.

tions)

Cleaning Cloth

(BN63-01798B)

TV-Holder / Screw

(BN96-10788A)

(Refer to page 41)

Power Cord

Screw (4ea)

Audio Cable /

Video Cable

-20° ~ 20°

Viewing the Control Panel

The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.

The product color and shape may vary depending on the model.

If you touch the front panel button, the each button will be operated.

SOURCE E

Toggles between all the available input sources (TV, AV, Component1, Conponent2, HDMI1, HDMI2/DVI). In the on-screen menu, use this button as you use the ENTERE button on the remote control.

Press to see an on-screen menu of your TV’s features.

+ VOL –

Press to increase or decrease the volume. In the on-screen menu, use the + VOL – buttons as you would use the

◄ and ► buttons on the remote control.

< CH >

Press to change channels. In the on-screen menu, use the < CH > buttons as you would use the ▲ and ▼ buttons on the remote control.

POWER INDICATOR

Blinks and turns off when the power is on and lights up in stand-by mode.

P (POWER)

Press to turn the TV on and off.

REMOTE CONTROL SENSOR

Aim the remote control towards this spot on the TV.

SPEAKERS

English - 6

English - 7

Viewing the Connection Panel

Use the connection panel jacks to connect A/V components that will be connected continuously, such as Blu-Ray DVD Players or a VCR.

The product color and shape may vary depending on the model.

TV Rear Panel

POWER IN

Connects the supplied power cord.

SERVICE

Used for service only.

AUDIO OUT

Connect to a Digital Audio component.

EX-LINK

Used for service only.

DVI AUDIO IN (AUDIO-R/L)

Connect to the DVI audio output jack of an external device.

HDMI IN 1, 2(DVI)

Connect to the HDMI jack of a device with an HDMI output.

HDMI 2 can also be used as a DVI connection with

separate analog audio inputs. An optional HDMI/DVI cable will be necessary to make this connection.

When using an optional HDMI/DVI adapter, the DVI

analog audio inputs on your TV allow you to receive left and right audio from your DVI device.

ANT IN

Uses a 75Ω Coaxial connector for an Air/Cable Network.

DIGITAL AUDIO OUT (OPTICAL)

Connects to a Digital Audio component.

COMPONENT IN 1, 2 / AV IN 1

Connects Component video / audio. The COMPONENT IN 1 jack is also used as the AV IN 1 jack.

Connect the video cable to the COMPONENT IN 1

[Y/VIDEO] jack and the audio cable to the COMPONENT IN 1 [R-AUDIO-L] jacks.

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV.

The product color and shape may vary depending on the model.

The performance of the remote control may be affected by bright light.

POWER

Turns the TV on and off.

NUMERIC BUTTONS

Press to change the channel.

Press to select additional channels (digital and analog) being broadcast by the same station. For example, to select channel “54-3”, press “54”, then press “ ” and “3”.

MUTE

Press to temporarily cut off the sound.

VOL

Press to increase or decrease the volume.

SOURCE

Press to display and select the available video sources.

CH LIST

Used to display Channel Lists on the screen.

TOOLS

Use to quickly select frequently used functions.

UP▲/DOWN▼/LEFT◄/

RIGHT►/ENTER Use to select on-screen menu items and change menu values.

INFO

Press to display information on the TV screen.

COLOR BUTTONS

Use these buttons in the Channel list.

S.MODE

Press to select the sound mode.

P.MODE

Press to select the picture mode.

Use these buttons in the DMA, Anynet+

modes. ( : This remote can be used to control recording on Samsung recorders with the Anynet+ feature)

Selects the TV mode directly.

PRE-CH

Tunes to the previous channel.

Press to change channels.

Displays the on-screen menu.

FAV.CH

(

Press to switch to your favorite channels.

RETURN

)

Returns to the previous menu.

EXIT

Press to exit the menu.

P.SIZE

Picture size selection.

SRS

Selects SRS TruSurround HD mode.

Controls the caption decoder.

MTS

Press to choose stereo, mono or Separate Audio Program (SAP broadcast).

Installing Batteries in the Remote Control

❑

1. Lift the cover at the back of the remote control upward as shown in the gure.

2. Install two AAA size batteries.

Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

3. Close the cover as shown in the gure.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a

long time. (Assuming typical TV usage, the batteries should last for about one year.)

If the remote control doesn’t work, check the following

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage or is the power cord unplugged?

5. Is there a special uorescent light or neon sign nearby?

English - 8

English - 9

Connections

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like this, see “Antennaswith300ΩFlatTwin Leads” below.

Ifyourantennahasoneleadthatlookslikethis,see“Antennaswith75ΩRoundLeads.” If you have two antennas, see “Separate VHF and UHF Antennas.”

Antennaswith300ΩFlatTwinLeads

❑

Ifyouareusinganoff-airantenna(suchasaroofantennaorrabbitears)thathas300Ω

twin flat leads, follow the directions below.

1. Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not supplied).

Use a screwdriver to tighten the screws.

2. Plug the adaptor into the ANT IN terminal on the back of the TV.

Antennaswith75ΩRoundLeads

❑

Plug the antenna lead into the ANT IN terminal on the back of the TV.

Separate VHF and UHF Antennas

❑

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).

1. Connect both antenna leads to the combiner.

2. Plug the combiner into the ANT IN terminal on the bottom of the back panel.

ANT IN

UHF

VHF

ANT IN

UHF

VHF

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

❑

Plug the incoming cable into the ANT IN terminal on the back of the TV.

Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.

Connecting to a Cable Box that Descrambles All Channels

❑

1. Find the cable that is connected to the ANT OUT terminal on your cable box.

This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

2. Connect the other end of this cable to the ANT IN terminal on the back of the TV.

ANT IN

ANT OUT

ANT IN

Continued...

Connecting to a Cable Box that Descrambles Some Channels

❑

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most electronics stores.)

1. Find and disconnect the cable that is

connected to the ANT IN terminal on your cable box.

This terminal might be labeled “ANT IN”, “VHF IN” or simply, “IN”.

2. Connect this cable to a two-way splitter.

3. Connect an Antenna cable between the

OUTPUT terminal on the splitter and the IN terminal on the cable box.

4. Connect an Antenna cable between the ANT

OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.

5. Connect another cable between the other

OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.

Incoming

cable

Incoming

cable

Incoming

cable

Splitter

ANT IN

Incoming

Splitter

cable

Cable Box

Splitter

Cable Box

RF (A/B)

Switch

RF (A/B)

Switch

6. Connect the last Antenna cable between the

OUT terminal on the RF (A/B) switch and the ANT IN terminal on the rear of the TV.

Incoming

cable

Splitter

RF (A/B)

Switch

TV Rear

ANT IN

After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

English - 10

English - 11

Connecting a DVD / Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) via HDMI

This connection can only be made if there is an HDMI Output jack on the external device. This connection will provide the highest quality picture.

1. Connect an HDMI Cable between the HDMI IN 1 or 2(DVI) jack on the TV and the HDMI jack on the DVD / Blu-Ray Player or Cable

Box / Satellite receiver (Set-Top Box).

DVD/Blu-Ray Player or Cable

Box / Satellite receiver

HDMI Cable (Not supplied)

What is HDMI?

HDMI, or high-denition multimedia interface, is an interface that enables the transmission of digital audio and video signals using a

•

TV Rear Panel

single cable. The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital Copy

• Protection) coding feature installed.

Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel conguration.

The TV may not output sound and pictures may be displayed with abnormal color when DVD / Blu-Ray Player or Cable Box /

Satellite receiver supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2(DVI) jack and the audio cables to the DVI AUDIO IN [R-AUDIO-L] jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-Ray Player or Cable Box / Satellite receiver to

conrm the HDMI version, then request an upgrade. HDMI cables that are not 1.3 may cause annoying icker or no screen display.

Connecting a DVD /Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) via DVI

This connection can only be made if there is a DVI Output jack on the external device.

1. Connect a HDMI/DVI Cable or DVI-HDMI Adapter between the HDMI IN 2(DVI) jack on the TV and the DVI jack on the DVD /

Blu-Ray Player or Cable Box/Satellite receiver (Set-Top Box).

2. Connect Audio Cables between the DVI AUDIO IN [R-AUDIO-L] jack on the TV and the DVD / Blu-Ray Player or Cable Box /

Satellite receiver.

DVD/Blu-Ray Player or Cable Box /

Satellite receiver

Audio Cable (Not supplied)2

HDMI/DVI Cable (Not supplied)

Each DVD / Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel conguration.

When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal to the

TV Rear Panel

cable.

When using an HDMI / DVI cable connection, you must use the HDMI IN 2(DVI) jack.

Connecting a DVD / Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) via Component cables

The rear panel jacks on your TV make it easy to connect a DVD/Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) to your TV.

1. Connect Component Cable between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB, PR]

jacks on the DVD / Blu-Ray Player or Cable Box / Satellite receiver(Set-Top Box).

2. Connect Audio Cables between the COMPONENT IN (1 or 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the DVD /

Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box).

TV Rear Panel

DVD / Blu-Ray Player or Cable Box

/ Satellite receiver

Audio Cable (Not supplied)2

Component Cable (Not supplied)1

Component video separates the video into Y (Luminance (brightness)), PB (Blue) and PR (Red) for enhanced video quality. Be sure

to match the component video and audio connections. For example, if connecting the video cable to COMPONENT IN 1, connect the audio cable to COMPONENT IN 1 also.

Each DVD / Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel conguration.

When connecting a DVD / Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal

to the cable.

Connecting a Camcorder

The side and rear panel jacks on your TV make it easy to connect a camcorder to your TV.

Using an HDMI Cable

❑

1. Connect an HDMI Cable between the HDMI IN 1 or 2(DVI) jack on the TV and the HDMI jack on the camcorder.

TV Rear Panel

Camcorder

HDMI Cable (Not supplied)1

Each Camcorder has a different back panel conguration.

English - 12

English - 13

Connecting a VCR

Video Connection

❑

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 9~10). Skip step 1 if you have not yet connected to an antenna or a cable system.

1. Unplug the cable or antenna from the back of the TV.

2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR.

3. Connect an Antenna Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.

4. Connect a Video Cable between the AV IN 1 [Y/VIDEO] jack on the TV and the VIDEO OUT jack on the VCR.

5. Connect Audio Cables between the AV IN 1 [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the VCR

TV Rear Panel

VCR Rear Panel

If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the

Audio Cable(Not supplied)5

Video Cable(Not supplied)4

Antenna cable(Not supplied)3

TV. Alternatively, connect the cable to the “R” jack. If your VCR is stereo, you must connect two cables.

Each VCR has a different back panel conguration.

When connecting a VCR, match the color of the connection terminal to the cable.

When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).

Connecting a Digital Audio System

The rear panel jacks on your TV make it easy to connect a Digital Audio System(Home theater/Receiver) to your TV.

1. Connect an Optical Cable between the DIGITAL AUDIO OUT (OPTICAL) jacks on the TV and the Digital Audio Input (OPTICAL)

jacks on the Digital Audio System.

When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack : Decrease the volume of the TV, and adjust the volume level with the system’s volume control.

TV Rear Panel

Digital Audio System

Optical Cable (Not supplied)

5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.

Each Digital Audio System has a different back panel conguration.

When the receiver (home theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a

DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / Blu-Ray player or Cable/

Satellite Box directly to an Amplier or Home Theater, not the TV.

Connecting an Amplifier / DVD Home Theater

1. Connect Audio Cables between the AUDIO OUT [R-AUDIO-L] jacks on the TV and AUDIO IN [L-AUDIO-R] jacks on the Amplier/

DVD Home Theater.

When an audio amplier is connected to the AUDIO OUT [R-AUDIO-L] jacks terminals : Decrease the volume of the TV, and adjust the volume level with the Amplier’s volume control.

TV Rear Panel

Amplifier / DVD Home Theater

Audio Cable (Not supplied)

Each Amplier / DVD Home Theater has a different back panel conguration.

When connecting an Amplier / DVD Home Theater, match the color of the connection terminal to the cable.

English - 14

English - 15

Connecting a PC

Using an HDMI Cable

❑

1. Connect an HDMI/DVI cable between the HDMI IN 2(DVI) jack on the TV and the PC output jack on your computer.

2. Connect a 3.5 mm Stereo plug to 2RCA cable between the DVI AUDIO IN [R-AUDIO-L] jack on the TV and the Audio Out jack of

the sound card on your computer.

TV Rear Panel

3.5 mm Stereo plug to 2 RCA Cable (Not supplied)

HDMI/DVI Cable (Not supplied)1

Each PC has a different back panel conguration.

When connecting a PC, match the color of the connection terminal to the cable.

When using an HDMI/DVI cable connection, you must use the HDMI IN 2(DVI) terminal.

Operation

VOL CH

Turning the TV On and Off

Press the POWER button on the remote control. You can also use the POWER button on the TV.

It may take a while for your TV to power on.

Changing Channels

Using the Channel Buttons

❑

Press the CH or CH button to change channels.

When you press the CH or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels). You will not see channels that were either erased or not memorized. See page 20 to memorize channels.

Using the Number Buttons

❑

Press the number buttons to go directly to a channel. For example, to select channel “27”, press “2”, then “7”.

For quick channel change, press the number buttons, then press the ENTERE button.

Using the “ ” Button

❑

The “ ” button is used to select stations that broadcast a digital signal.

1. For example, for Channel "7-1", press "7", then " ”, then ", then "1".

HD indicates the TV is receiving a Digital High Denition signal. SD indicates the TV is receiving a Standard Denition signal.

For quick channel change, press the number buttons, then press the ENTERE button.

Using the PRE-CH Button to select the Previous Channel

❑

1. Press the PRE-CH button. The TV will switch to the last channel viewed.

To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then use the PRE-CH button to quickly alternate between them.

Adjusting the Volume

Using the Volume Buttons

❑

1. Press the VOL or VOL button to increase or decrease the volume.

❑

Using the MUTE Button

At any time, you can cut off the sound using the MUTE button.

1. Press MUTE button and the sound cuts off.

The will displayed on the screen.

2. To turn mute off, press the MUTE button again, or simply press the VOL or VOL button.

English - 16

English - 17

Using the TOOLS Button

VOL CH

CHLIST

FAV.CH

VOL CH

CHLIST

FAV.CH

You can use the TOOLS button to select your frequently used functions quickly and easily. The Tools menu changes depending on which external input mode you are viewing.

1. Press the TOOLS button. The Tools menu will appear.

2. Press the ▲/▼ button to select a menu, then press the ENTERE button.

3. Press the ▲/▼/◄/►/ ENTERE buttons to display, change, or use the selected items.

For a more detailed description of each function, refer to the corresponding page.

Anynet+ (HDMI-CEC), see page 36

• Sleep Timer, see page 31

• Add to Favorite (or Delete from Favorite), see page 21

• Switch to Cable (or Air), see page 20

•

Anynet+ (HDMI-CEC)

Sleep Timer : Off

Add to Favorite

Switch to Cable

Tools

Viewing the Display

The display identifies the current channel and the status of certain audio-video settings.

1. Press the INFO button on the remote control. The TV will display the channel, the type of

sound, and the status of certain picture and sound settings.

Press the INFO button once more or wait approximately 10 seconds and it disappears

automatically.

TV #1

DTV Air

13-1

Dolby Digital

Next Program

Move Enter

Fri, Dec 19 2:05 am

M. Spillane’s Mike Hammer

Bonocrunch

Prison Break

1:55 am - 2:55 am

Exit

1080i 16:9 English

2:55 am - 3:55 m

Viewing the Menus

Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions.

1. Press the MENU button. The main menu is displayed on the screen. Its left side has the following icons: Picture, Sound, Channel , Setup, Input, Application, Support.

2. Press the ▲ or ▼ button to select one of the icons.

Press the ◄ or ► button to access the icon’s sub-menu.

3. Press the ▲ or ▼ button to move to items in the menu. Press the ENTERE button to enter items in the menu.

4. Press the ▲/▼/◄/► button to change the selected items. Press the RETURN button to return to the previous menu.

5. Press the EXIT button to exit from the menu.

Using the remote control buttons

Button Operations Button Operations

MENU Display the main on-screen menu.

RETURN Return to the previous menu.

EXIT Exit the on-screen menu.

Example: Setting the TV’s Brightness in the Picture Menu

❑

Adjusting the Brightness to 80



1. Press the MENU button to display the menu.

▲/▼/◄/►/

ENTERE

Move the cursor and select an item.

Select the currently selected item.

Confirm the setting.

Picture

Mode : Standard

Cell Light : 4

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

2. Press the ENTERE button to select Picture.

3. Press the ▲ or ▼ button to select Brightness.

4. Press the ENTERE button.

5. Press the ◄ or ► button until the Brightness changes to 80.

6. Press the ENTERE button.

Press the EXIT button to exit from the menu.

Picture

Mode

Cell Light : 4

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Cell Light : 4 Contrast : 95

Picture

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Advanced Settings

Picture Options

Picture Reset

▲

Brightness

▼

Move

▲

Brightness

▼

Move

Adjust

Standard

Enter

►

Return

English - 18

English - 19

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently.

The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running.

The Screen Saver is activated if there is no operating signal for longer than 15 minutes.

1. Press the POWER button on the remote control. The message Menu Language, Store Demo, Channels, and Time will be set. is displayed.

Menu Language, Store Demo, Channels, and Time will be set.

2. Press the ENTERE button, then Select Language of the OSD. menu is automatically displayed. Press the ENTERE button.

Press the ▲ or ▼ button to select language, then press the ENTERE button.

The message Select ‘Home Use’ when installing this TV in your home. is displayed.

3. Press the ◄ or ► button to select Store Demo or Home Use, then press the ENTERE

button. We recommend setting the TV to Home Use mode for the best picture in your home environment.

Store Demo mode is only intended for use in retail environments.

Select the Antenna source to memorize.

Air

Cable

Auto

If the unit is accidentally set to Store Demo mode and you want to return toreturn to Home Use (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

4. The message Select the Antenna source to memorize. is displayed. Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the ENTERE button to select Start.

Air: Air antenna signal.

•

Cable: Cable antenna signal.

•

Auto: Air and Cable antenna signals.

•

In Cable mode, you can select the correct signal source among STD, HRC, and

Auto Program in Progress.

DTV Air : -DTV Cable : --

IRC by pressing the ▲, ▼, ◄ or ► button, then press the ENTERE button. If you

have Digital cable, select the cable system signal source for both Analog and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.

5. The TV will begin memorizing all of the available channels.

To stop the search before it has nished, press the ENTERE button with Stop

selected. After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears.

Press the ENTERE button when channel memorization is complete.

6. The message Set the Clock Mode. is displayed. Press the ENTERE button.

Press the ▲ or ▼ button to select Auto, then Press the ENTERE button. The message Set to daylight saving time. is displayed. If you select Manual, Set current date and time is displayed. For detailed descriptions about the Manual, refer to page 31.

7. Press the ▲ or ▼ button to select Off, On, or Auto, then press the ENTERE button. The image to select time zone in which you live is automatically displayed.

8. Press the ▲ or ▼ button to select the time zone, then press the ENTERE button.

If you have received a digital signal, the time will be set automatically. If not, see page 31 to set the clock.

9. The brief instruction on How to get the best performance from your new HDTV is displayed. Press the ENTER

This menu is available HD connection Guide in the Support menu.

button.

10. Press the ENTERE button. The message Enjoy your TV. is displayed. When you have nished, press the ENTERE button.

Plug & Play

Start

Plug & Play

Air : 8 Cable : --

Stop

Plug & Play

Enjoy your TV.

Start

Enter

SkipEnterMove

11Air

Skip

If you want to reset this feature...

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTERE button.

2. Press the ENTERE button again to select Plug & Play. For further details on setting

up options, press the ENTERE button again.

The Plug & Play feature is only available in the TV mode.

Setup

Plug & Play

Language : English

Time

Game Mode : Off

V-Chip

Caption

Melody : Medium

►

Channel Control

VOL CH

CHLIST

FAV.CH

Storing Channels

Antenna→Air/Cable

❑

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).

Press the TOOLS button to display Tools menu.

You can also switch the antenna by selecting Tools → Switch to Cable (or Air)

Auto Program

❑

Air: Air antenna signal.

•

Cable: Cable antenna signal.

•

Auto: Air and Cable antenna signals

•

STD, HRC and IRC identify various types of cable TV systems. Contact your local

cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected.

After all the available channels are stored, it starts to remove scrambled channels.

The Auto program menu then reappears. If you want to stop Auto Programming, press the ENTERE button.

The Stop Auto Program? message will be displayed. Select Yes by pressing the

◄ or ► button, then press the ENTERE button.

Clearing Scrambled Channel (Digital)

❑

The Clear Scrambled Channel function is used to lter out scrambled channels after Auto Program is completed.

This process may take up to 20~30 minutes.

To stop searching scrambled channels: Press the ENTERE button to select Stop. Press the ◄ button to select Yes, then press the ENTERE button.

This function is only available in Cable mode.

Fine Tune (Analog)

❑

Use ne tuning to manually adjust a particular channel for optimal reception.

If you do not store the ne-tuned channel in memory, adjustments are not saved.

“*” will appear next to the name of ne-tuned channels.

To reset the ne tuning setting, press the ▼ button to select Reset, then press the

ENTERE button.

Channel

Antenna : Air

Auto Program

Clear Scrambled Channel

Channel List

Fine Tune

Clear Scrambled Channel

Removing scrambled channel.

Stop

Fine Tune

Air 6*

Reset

Move

Adjust

DTV Cable 122

Enter Return

Fine Tuned

Return

Save

►

Managing Channels

Channel List

❑

Using this menu, you can Add / Delete or set Favorite channels and use the program guide for digital broadcasts.

•



Using the Color buttons with the Channel List

•

Channel Status Display Icons

All Channels: Shows all currently available channels. Added Channels: Shows all added channels. Favorite: Shows all favorite channels. Programmed: Shows all current reserved programs. Press the CH LIST button on the remote control to bring up the channel lists.

Green (Zoom): Enlarges or shrinks a channel number. Yellow (Select): Selects multiple channel lists. TTOOLS (Tools): Displays the Add (or Delete), Add to Favorite (or Delete from Favorite), Timer Viewing, Channel Name

Edit, Select All, Deselect All, and Auto Program menus (The Options menus may differ depending on the situation.)

A channel set as a Favorite.

♥

)

A reserved program

A channel selected by pressing the yellow button.

(

A program currently being broadcast.

Continued...

English - 20

English - 21

Channel List Tools Menu (in All Channels / Added Channels / Favorite)

VOL CH

CHLIST

FAV.CH

❑

Press the TOOLS button to use the option menu.

Option menu items may differ depending on the channel status.

Add / Delete



You can delete or add a channel to display the channels you want.

All deleted channels will be shown on All Channels menu.

A gray-colored channel indicates the channel has been deleted.

The Add menu only appears for deleted channels.

You can also delete a channel to the Added Channels or Favorite menu in the same

manner.

Add to Favorite / Delete from Favorite



You can set channels you watch frequently as favorites.

Press the TOOLS button to display Tools menu.

You can also set the favorite channel by selecting

Tools → Add to Favorite (or Delete from Favorite)

The “♥” symbol will be displayed and the channel will be set as a favorite.

All favorite channels will be shown on Favorite menu.

To select the favorite channels you have set up, press the FAV.CH button on the

remote control.

Timer Viewing



If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel.

To reserve a program , set the current time rst.

Only memorized channels can be reserved.

You can set the channel, month, day, year, hour and minute directly by pressing the

number buttons on the remote control. Reserving a program will be shown on Programmed menu.

Digital Program Guide and Viewing Reservation: When a digital channel is

selected, and you press the ► button, the Program Guide for the channel appears. You can reserve a program according to the procedures described above.

All Channels

Air Zoom

All Channels

Air Zoom

All Channels

Air Zoom

6 Air

6-1 ♥ TV #6

7 Air

7-1 ♥ TV #7

9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10 11-1 ♥ TV #11

19 Air

6 Air

6-1 ♥ TV #6

7 Air

7-1 ♥ TV #7

9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10 11-1 ♥ TV #11

19 Air

6 Air

6-1 ♥ TV #6

7 Air

7-1 ♥ TV #7

9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10 11-1 ♥ TV #11

19 Air

Delete Add to Favorite Timer Viewing Channel Name Edit Select All Auto Program

Select T Tools

Delete Add to Favorite Timer Viewing Channel Name Edit Select All Auto Program

Select T Tools

Delete Add to Favorite Timer Viewing Channel Name Edit Select All Auto Program

Select T Tools

Select All / Deselect All



•

N N

Channel Name Edit (Analog)



Channels can labeled so that their call letters appear whenever the channel is selected.

Channel List Tools Menu (in Programmed)

❑

You can view, modify or delete a reservation.

Change Info



Select to change a viewing reservation.

Cancel Schedules



Select to cancel a viewing reservation.

Information



Select to view a viewing reservation. (You can also change the reservation information.)

Select All / Deselect All



You can select (or deselect) all channels in the channel list.

Select All: You can select all the channels in the channel list. Deselect All: You can deselect all the selected channels in the channel list.

You can perform the add / delete, add to Favorite / delete from Favorite function for multiple channels at the same time. Select the required channels and press the yellow button to set all the selected channels at the same time.

The c mark appears to the left of the selected channels. You can only select Deselect All when there is a selected channel.

The names of digital broadcasting channels are automatically assigned and cannot be labeled.

Programmed

9/20/2009

Press the TOOLS button to use the option menu.

5:02 pm 3

9/19/2009

5:20 pm

Air Zoom

Change Info Cancel Schedules Information Select All

Select T Tools E Information

Picture Control

VOL CH

CHLIST

FAV.CH

P.SIZE

MTS

SRS

P.MODE

S.MODE

Changing the Picture Settings

Mode

❑

You can select the type of picture which best corresponds to your viewing requirements.

Dynamic: Select a high-definition picture for bright environments.

•

Standard: Selects the optimal picture display for normal environments. This

• setting is convenient for most situations.

Movie: Selects a comfortable picture display for dark environments.

• You can select these options simply by pressing the P.MODE button on the remote

control.

Cell Light / Contrast / Brightness / Sharpness / Color / Tint (G/R)

❑

Your television has several setting options that allow you to control the picture quality.

Cell Light: Adjusts the pixel brightness. 10 is the brightest setting.

• Contrast: Adjusts the contrast level.

• Brightness: Adjusts the brightness level.

• Sharpness: Adjusts the sharpness.

• Color: Adjusts the color saturation of the picture using the bar on the screen.

• Tint (G/R): The closer to Red 100, the more saturated the red color becomes.

• When you make changes to Cell Light, Contrast, Brightness, Sharpness, Color or

Tint (G/R), the OSD will be adjusted accordingly. Settings can be adjusted and stored for each external device you have connected to

an input of the TV.

The energy consumed during use can be signicantly reduced if thebrightness level is

lowered, which will reduce the overall running cost.

Advanced Settings

❑

You can adjust the detailed settings for your screen including the color and contrast.

Advanced Settings is available in Standard or Movie mode.

Black Tone



You can select the black level on the screen to adjust the screen depth.

Off: Turns the Black Adjust function off.

• Dark: Sets the black color depth to dark.

• Darker: Sets the black color depth to darker.

• Darkest: Sets the black color depth to darkest.

•

Dynamic Contrast



You can adjust the screen contrast so that the optimal contrast is provided.

Off: Turns the Dynamic Contrast function off.

• Low: Sets Dynamic Contrast to low.

• Medium: Sets Dynamic Contrast to medium.

• High: Sets Dynamic Contrast to high.

•

Picture

Mode

Cell Light : 4

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Mode : Standard

Picture

Cell Light : 4

Contrast : 95

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Advanced Settings

Black Tone : Off ►

Dynamic Contrast : Medium

Gamma : 0

Color Space : Native

White Balance

Flesh Tone : 0

Edge Enhancement : On

Move

Standard

►

ReturnEnter

Gamma



You can adjust the Primary Color (Red, Green, Blue) Intensity.

Color Space



Color Space is a color matrix composed of red, green and blue colors. Select your Favorite color space to experience the most natural color.

Native: Sets the color range wider than that of the input video source.

• Auto: Automatically sets the color range depending on the input video source.

•

English - 22

Continued...

English - 23

White Balance

VOL CH

CHLIST

FAV.CH

P.SIZE

MTS

SRS

P.MODE

S.MODE



You can adjust the color temperature for more natural picture colors.

R-Offset: Adjust the low level red intensity.

• G-Offset: Adjust the low level green intensity.

• B-Offset: Adjust the low level blue intensity.

• R-Gain: Adjusts the high level red intensity.

• G-Gain: Adjusts the high level green intensity.

• B-Gain: Adjusts the high level blue intensity.

• Reset: Resets the default white balance.

• Changing the adjustment value will refresh the adjusted screen.

Flesh Tone



You can emphasize the pink esh tone in the picture.

Changing the adjustment value will refresh the adjusted screen.

EdgeEnhancement→Off/On



You can emphasize object boundaries in the picture.

Advanced Settings

Black Tone : Off

Dynamic Contrast : Medium

Gamma : 0

Color Space : Native

White Balance ►

Flesh Tone : 0

Edge Enhancement : On

Move

ReturnEnter

Picture Options

❑

ColorTone→Cool/Normal/Warm1/Warm2



You can select the most comfortable color tone for viewing.

Warm1 or Warm2 is only activated when the picture mode is Movie.

Settings can be adjusted and stored for each external device you have connected to

an input of the TV.

Size



Occasionally, you may want to change the size of the image on your screen. Your TV

comes with six screen size options, each designed to work best with specic types

of video input. Your satellite receiver may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode as much as possible.

16:9: Sets the picture to the 16:9 aspect ratio.

• Zoom1: Stretches the 16:9 aspect ratio picture vertically.

• Zoom2: Stretches the Zoom 1 picture vertically.

• Wide Fit: Stretches the picture both horizontally and vertically to display

• the optimal picture.

4:3: Sets the picture to the 4:3 aspect ratio.

• Screen Fit: Displays the full native HD signal that cannot be viewed

• using a normal TV.

Alternately, you can press the P.SIZE button on the remote control repeatedly to

change the picture size.

Tint (G/R) : G50/R50

Advanced Settings

Picture

Picture Options

Picture Reset

Picture Options

Color Tone : Normal ►

Size : 16:9

Digital NR : Auto

HDMI Black Level : Normal

Film Mode : Off

Screen Burn Protection

Move

►

ReturnEnter

16:9 Zoom1 Zoom2

Wide Fit 4:3 Screen Fit

Continued...

Temporary image retention may occur when viewing a static image on the set for more than two hours.

After selecting Zoom1, Zoom2 or Wide Fit:

Press the ◄ or ► button to select Position, then press the ENTERE button. Press the ▲ or ▼ button to move the picture up and down. Reset: Press the ◄ or ► button to select Reset, then press the ENTERE button.

You can initialize the setting. After selecting Screen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode, you made need to center the picture:

Press the ◄ or ► button to select Position, then press the ENTERE button. Press the ▲, ▼, ◄ or ►button to move the picture. Reset: Press the ◄ or ► button to select Reset, then press the ENTERE button. The TV will be reset to 16:9.

HD (High Denition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

Input Source Picture Size

ATV, Video, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3 Component (720p) 16:9, Wide Fit, 4:3 DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p) 16:9, 4:3, Wide Fit, Screen Fit

Digital NR



If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.

Off: Turns the Digital NR function off.

•

Low: Sets Digital NR to low.

•

Medium: Sets Digital NR to medium.

•

High: Sets Digital NR to high.

•

Auto: Sets Digital NR to Auto.

•

HDMI Black Level



Tint (G/R) : G50/R50

Picture

Advanced Settings

Picture Options

Picture Reset

You can directly select the black level on the screen to adjust the screen depth.

Normal: The screen gets brighter.

•

Low: The screen gets darker.

• This function is active only when an external device is connected to the TV via HDMI.

HDMI Black Level function may not be compatible with all external devices.

Film Mode



The TV can be set to automatically sense and process lm signals from all sources and

adjust the picture for optimum quality.

Off: Basic video image processing applied and No auto-detection for

•

lm-based programs.

Auto: Automatically adjusts for the best image quality between lm and

•

Color Tone : Normal

Size : 16:9

Digital NR : Auto ►

HDMI Black Level : Normal

Film Mode : Off

Screen Burn Protection

Picture Options

Move

video programs. Film mode is supported in TV, Video, Component (480i / 1080i) and HDMI (1080i).

►

ReturnEnter

Screen Burn Protection



Congures the Screen Burn Protection options to prevent and reduce pixel burn. When an image remains in one position too long, it may cause a permanent burn on the screen.

Preventing Screen Burn-in

To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot).

The Time setting allows you to program the time between movement of the picture in minutes.

Pixel Shift: Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to prevent after-

• images on the screen.

Optimum condition for pixel shift;

Item TV/AV/Component/HDMI

Horizontal 0~4 2

Vertical 0~4 2

Time(min.) 1~4 min. 2 min.

Continued...

English - 24

English - 25

Side Gray: When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white

• balance on both extreme left and right sides. To prevent the screen burn from happening, select Dark or Light.

Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.

Light: When you set the screen ratio to 4:3, it brightens the left and right sides.

Reducing the Effects of Screen Burn

If screen burn has occurred, you can select scrolling to help remove screen burn artifacts.

Scrolling: This function removes after-images on the screen by moving all the pixels on the PDP according to a pattern. Use

• this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time.

The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after-images

on the screen. If the after-image is not removed after performing the function, repeat the function again. Press any key on the remote control to cancel this feature.

VOL CH

CHLIST

FAV.CH

P.SIZE

MTS

SRS

P.MODE

S.MODE

Sound Control

VOL CH

CHLIST

FAV.CH

P.SIZE

MTS

SRS

P.MODE

S.MODE

VOL CH

CHLIST

FAV.CH

P.SIZE

MTS

SRS

P.MODE

S.MODE

Changing the Sound Settings

Mode

❑

You can select the sound mode to best suit the programming you’re watching.

Standard: This sound mode is for general purposes.

•

Music: Music mode enables you to listen to music as if you are sitting

• in a concert hall.

Movie: Movie mode enables you to experience live and full movie sound as if you are

• sitting in a movie theater.

Clear Voice: Emphasizes voice over other sounds. Select this sound mode when

• watching news, soap operas, or documentaries.

Custom: You can customize the sound settings to suit your personal preferences.

• You can select these options simply by pressing the S.MODE button on the remote

control.

Equalizer

❑

The sound settings can be adjusted to suit your personal preferences.

Mode: Selects the sound mode among the predened settings.

• Balance L/R: Adjusts the balance between the right and left speaker.

• 100Hz, 300Hz, 1kHz, 3kHz, 10kHz (Bandwidth Adjustment): Adjusts the level of

• different bandwidth frequencies.

Reset: Resets the equalizer settings to the default values.

•

SRSTruSurroundHD→Off/On

❑

SRS TruSurround HD enables you to enjoy a virtual 5.1 Surround Sound effect over the TV's two speakers.

This function provides not only rich deep bass also improves high frequency resolution.

Sound

Mode : Costom

Equalizer

SRS TruSurround HD : Off

Preferred Language : English

Multi-Track Sound : Stereo

Auto Volume : Off

Speaker Select : TV Speaker

Equalizer

Mode : Custom

Balance L R

100Hz - +

300Hz - +

1kHz - +

3kHz - +

10kHz - +

▼

AdjustMove

ReturnEnter

►

Preferred Language (Digital)

❑

Digital-TV broadcasts are capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages).

Multi-Track Sound (MTS) (Analog)

❑

•

AutoVolume→Off/On

❑

Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

You can select these options simply by pressing the SRS button on the remote control.

TruSurround HD, SRS and the symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is incorporated under license from SRS Labs, Inc.

You can only select the language from among the actual languages being broadcast. You can listen in a language other than the Preferred Language by pressing the MTS button on the remote control.

Mono: Choose for channels that are broadcasting in mono or if you are having difculty receiving a stereo signal. Stereo: Choose for channels that are broadcasting in stereo. SAP: Choose to listen to the Separate Audio Program, which is usually a foreign-

language translation. Depending on the particular program being broadcast, you can listen to Mono,

Stereo, or SAP. Press the MTS button on the remote control repeatedly to select Mono, Stereo, or

SAP.

Continued...

English - 26

English - 27

Speaker Select

❑

When you watch TV with it connecting to a Home theater, turn the TV speakers off so you can listen to sound from the Home theater’s (external) speakers.

External Speaker: Uses the external speakers(Home Theater) to output sound.

• TV Speaker: Uses the TV speakers to output sound.

• If you select External Speaker in the Speaker Select menu, the sound settings will

be limited. The volume buttons and MUTE buttons do not operate when the Speaker Select

is set to External Speaker. Please set the volume on your Home theater.

TV's Internal Speakers Audio Out (Optical, L / R Out) to Sound System

TV / AV / Component / HDMI TV / AV / Component / HDMI

TV Speaker Speaker Output Sound Output

External Speaker Mute Sound Output

Video No Signal Mute Mute

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Sound Reset

❑

You can restore the Sound settings to the factory defaults.

Reset All: All the sound values return to default settings.

• Reset Sound Mode: Current sound values return to default settings.

• Cancel: Select the sound reset options.

•

Multi-Track Sound : Stereo

Auto Volume : Off

Sound

Speaker Select : TV Speaker

Sound Reset

►

Function Description

Configuring the Setup Menu

Language

❑

You can set the menu language.

GameMode→Off/On

❑

When connecting to a game console such as PlayStationTM or XboxTM, you can enjoy a more realistic gaming experience by selecting the game menu.

When the Game Mode is On



Picture mode is automatically changed to Standard and cannot be changed.

• Sound mode is automatically changed to Custom and cannot be changed.

• Adjust the sound using the equalizer.

The Reset in the Sound menu is activated. Reset function initializes the Equalizer settings to the factory default setting.

•

Game Mode is not available in regular TV mode.

If the picture is poor when an external device is connected to the TV, check if Game Mode is On.

If you display the TV menu in Game mode, the screen shakes slightly.

The mark ( ) appears on the screen which means that Game Mode is on with the selected source.

This function supports only game function.

Setup

Plug & Play

Language : English

Time

Game Mode : Off

V-Chip

Caption

Melody : Medium

Energy Saving : Off

►

Continued...

+ 63 hidden pages