Samsung PN42A450P1DXZA User Manual
1-800-SAMSUNG (7267864)
($-)).
Samsung Electronics America, Inc.
105 Challenger Road Ridgefield Park, NJ 07660-0511
Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2
Call center hours of operation (Mon-Sun 9AM-12AM EST).
To register this product please visit
www.samsung.com/global/register.
Rear & Side Panel Jacks
PN42A450P1D/ PN50A450P1D
1
POWER IN
2
DIGITAL AUDIO OUT (OPTICAL)
3
AUDIO OUT (R/L)
4
PC IN[PC]/[AUDIO]
5
DVI IN (HDMI 2) (AUDIO-R/L)
6
HDMI IN 1, 2
7
ANT IN
8
SERVICE
9
3D SYNC OUT
0
COMPONENT IN 1, 2 / AV IN 1
!
EX-LINK
@
HDMI IN 3
Video Input Performance Comparison
/
/
HDMI/DVI Best
PC/COMPONENT Better
S-VIDEO Good
VIDEO Normal
English - 1
#
S-VIDEO (AV IN 2)
$
AV IN 2
%
HEADPHONE
Audio Output Performance Comparison
OPTICAL (Digital) Best
AUDIO (Analog) Normal
English - 2
Remote Control Buttons
1
3
2
4
5
6
7
8
9
10
21
23
24
20
18
16
15
17
19
12
22
25
11
13
14
You can use the remote control up to a distance of about 23 feet from the TV.
1
POWER
Turns the TV on and off.
2
TV
Selects the TV mode directly.
3
NUMERIC BUTTONS
Press to directly select a channel.
4
–
Press to select additional channels
(digital and analog) being
broadcast by the same station. For
example, to select channel “54-3”,
press “54”, then press “–” and “3”.
5
MUTE
Press to temporarily cut off the
sound.
6
VOL
Press to increase or decrease the
volume.
7
CH LIST
Used to display Channel Lists on
the screen.
8
TOOLS
Use to quickly select frequently
used functions.
9
UP▲/DOWN▼/LEFT◄/ RIGHT►/
ENTER
Use to select on-screen menu
items and change menu values.
0
INFO
Press to display information on the
TV screen.
!
COLOR BUTTONS
Use these buttons in the Channel
@
list.
SRS
Selects SRS TruSurround XT
mode.
#
E.MODE
Press to select the preset display
and sound modes for sports,
cinema and games.
$
Use these buttons in the DMA and
Anynet+ modes.
( : This remote can be used
to control recording on Samsung
recorders with the Anynet+ feature)
%
SOURCE
Press to display all of the available
video sources.
^
PRE-CH
Tunes to the previous channel.
& CH
Press to change channels.
*
CC
Controls the caption decoder.
(
MENU
Displays the main on-screen menu.
)
RETURN
Returns to the previous menu.
a
EXIT
Press to exit the menu.
b
MTS
Press to choose stereo, mono or
Separate Audio Program (SAP
broadcast).
c
DMA (Digital Media Adapter)
Use this when connecting a
Samsung DMA device through an
HDMI interface and switching to
DMA mode.
For more information on the
operating procedures, refer to the
user manual of the DMA.
➢
This button is available when
“Anynet(HDMI-CEC)” is “On”.
(see page 65 of the owner's
manual)
d
FAV.CH
Press to switch to your favorite
channels.
e
P.SIZE
Press to change the screen size.
The performance of the remote control may be affected by bright light..
➢
English - 3
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via HDMI
Connecting to HDMI (High Definition Multimedia Interface)
Connect an HDMI Cable between
the HDMI IN(1, 2 or 3) jack on the
1
TV and the HDMI jack on the DVD
Player or Cable Box / Satellite
receiver (Set-Top Box).
Press the SOURCE button on the
remote control until you see the
2
DVD Player or Cable Box/Satellite
receiver (Set- Top Box)
“To Select the Source” on page 10)
➢
Each DVD Player or Cable Box /
Satellite receiver (Set-Top Box) has a
different back panel configuration.
➢
When connecting a DVD Player or
Cable Box / Satellite receiver (SetTop Box), match the color of the
connection terminal to the cable.
signal (see
DVD Player or Cable Box /
Satellite receiver (Set-Top Box)
HDMI Cable (Not supplied)
TV Rear Panel TV Side Panel
1
or
Connecting to DVI (Digital Visual Interface)
DVD Player or Cable Box /
Satellite receiver (Set-Top Box)
Audio Cable (Not supplied)
HDMI/DVI Cable (Not supplied)
TV Rear Panel
2
1
Connect a HDMI/DVI Cable or DVIHDMI Adapter between the HDMI
1
IN 2 jack on the TV and the DVI jack
on the DVD Player or Cable Box/
Satellite receiver (Set- Top Box).
Connect Audio Cables between the
DVI IN (HDMI 2)
2
[R-AUDIO-L] jack on the TV and
the AUDIO OUT jacks on the
DVD Player or Cable Box/Satellite
receiver (Set-Top Box).
Press the SOURCE button on the
remote control until you see the
3
DVD Player or Cable Box/Satellite
receiver (Set- Top Box)
“To Select the Source” on page 10)
➢
When connecting a DVD Player or
Cable Box / Satellite receiver (SetTop Box), match the color of the
connection terminal to the cable.
➢
When using an HDMI / DVI cable
connection, you must use the HDMI IN
2 jack.
➢
Each DVD Player or Cable Box /
Satellite receiver (Set-Top Box) has a
different back panel configuration.
signal (see
English - 4
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via Component cables
Connecting to Y, PB, PR
Connect Component Cables
between the COMPONENT IN (1 or
1
2) [Y, PB, PR] jacks on the TV and
the COMPONENT [Y, PB, PR] jacks
on the DVD Player or Cable Box /
Satellite receiver(Set-Top Box).
Connect Audio Cables between
the COMPONENT IN (1 or 2) [R-
2
AUDIO-L] jacks on the TV and the
AUDIO OUT jacks on the DVD
Player or Cable Box / Satellite
receiver (Set-Top Box).
Press the SOURCE button on the
remote control until you see the
3
DVD Player or Cable Box/Satellite
receiver (Set- Top Box)
“To Select the Source” on page 10)
➢
Component video separates the video
into Y (Luminance (brightness)), PB
(Blue) and PR (Red) for enhanced
video quality. Be sure to match
the component video and audio
connections. For example, if
connecting the video cable to
COMPONENT IN 1, connect the audio
cable to COMPONENT IN 1 also.
➢
Each DVD Player or Cable Box /
Satellite receiver (Set-Top Box) has a
different back panel configuration.
➢
When connecting a DVD Player or
Cable Box / Satellite receiver (SetTop Box), match the color of the
connection terminal to the cable.
signal (see
DVD Player or Cable Box/
Satellite receiver (Set-Top Box)
2
Audio Cable (Not supplied)
Component Cable (Not supplied)
1
TV Rear Panel
Connecting a Camcorder
1
Camcorder
or
2
S-Video Cable(Not supplied)
Video Cable (Not supplied)
Audio Cable (Not supplied)
TV Side Panel
Connect a Video Cable
(or S-Video Cable) between the AV
1
IN 2 [VIDEO] (or S-VIDEO) jack on
the TV and the VIDEO OUT jack on
the Camcorder.
Connect Audio Cables between the
AV IN 2 [L-AUDIO-R] jacks on the
2
TV and the AUDIO OUT jacks on
the Camcorder.
Press the SOURCE button on the
remote control until you see the
3
Camcorder signal (see “To Select the
Source” on page 10)
➢
Each Camcorder has a different back
panel configuration.
➢
When connecting a Camcorder, match
the color of the connection terminal to
the cable.
Loading...