Samsung PL64E8000GFXZP User Manual

Page 1
SMART TV
QUICK SETUP GUIDE
Page 2
Smart Touch Control
Improved user convenience has been provided so that you can switch the channel and adjust the volume with just your fingertips while focusing on the TV screen. In addition, the built-in touch pad removes the need for a mouse when you change the menu settings and search for something on the Internet.
% For more detailed information about using the Smart Touch Control, refer to Smart Touch Control Guide (
Touch Control Guide).
% Voice Control performance levels will vary based on the language spoken. % Install the IR Blaster within 50 cm and 45 degrees in up, down, left and right from the IR sensor of the external device.
‹ →
Support → Smart
Turns the TV on and off.
Š
: Displays a list of recently used functions.
y
: Adjusts the Volume.
Displays the shortcut functions list.
RETURNR: Go to previous menu screen.
VOICE
˜
: Take your voice command and
enter a text using your voice.
NUMBER
š
: Displays the Number button
screen. Select a digit using the touch pad.
Brings up the Smart Hub applications.
RETURN
.*$
TV STB BD
VOICE NUMBER
You can use MIC to instruct a Voice Control command. To activate MIC, simply press the
˜
button.
VOICE
LED to show the active device.
Shows the color button, exit button and play control buttons.
T
: Quickly select frequently used functions.
z
: Changes channels.
Touch Pad
Scratch on the Touch Pad to move the focus on the screen.
Click on the Touch Pad to run the focused item.
Tap on the Touch Pad and hold to select the function
the same as the MUTE control. However, this action scrolls the page on a Web Browser.
Tap on the Touch Pad or press the RETURN button to return to the normal state.
button of the remote
M
R
% If no button is pressed for 30 seconds, the Touch
Pad is automatically turned off.
% To use the Touch Pad again, press any button.
Installing batteries (Battery size : AA)
Y
XX
Initial Pairing
1
Press any buttons on the Smart Touch Control toward the Remote receiver of TV’s.
2
The connection icons appear on the bottom left of the screen, and the TV connects to your Smart Touch Control automatically.
% If you want to perform the pairing process again, press the PAIRING button in the center of
the back cover. The Smart Touch Control will be initialized.
English - 2
1
Press the back of the remote at the very bottom with both thumbs, and then slide the battery cover up in the direction of the arrow.
2
Install two batteries so that the polarity of the batteries (+/-) matches the illustration in the battery compartment.
3
Slide the cover down in the direction of the arrow to close the battery cover.
Page 3
SMART Interaction (Voice and Motion Control)
Using this function, you can access and control menu options and functions using speech or motions.
% For more detailed information about Smart Interaction, see “Smart Interaction” in e-Manual or User manual. % The illustration of the manual may vary from the actual shape partially.
Voice Control Environment
We are recommended using Voice Control function within about 13 ft with your TV. You can check the usable distance by using Voice Control Environment Test (System
Control Environment Test).
Voice Control function can be affected recognition by unclear pronunciation, voice level, or surrounding noise.
Motion Control Environment
We are recommended using Motion Control function within about 5 - 13 ft with your TV. TV Camera’s recognition range may differ depending on the angle of camera or other conditions. You can check the recognition range of TV camera by using Motion Control Environment Test (System
Control
Motion Control Environment Test).
Voice Control
You can use only your voice to switch the channel or adjust the volume level while focusing on the TV screen, which removes the need for the conventional remote control.
Menu → System → Voice and Motion Control → Voice Control
HI TV.
TV Power Off.
“More Commands”
TV Power Off
Source
Channel Number
Channel Up/ Down
Volume Up/ Down
Mute
More Commands
Voice and Motion ControlVoice ControlVoice
Voice and Motion ControlMotion
1
Set Voice Control to On.
2
If you set Trigger Words to Hi TV, say “Hi TV”, and then basic available commands such as TV Power Off are displayed on the screen.
3
To adjust the volume, simply say “Volume up” or “Volume down”.
4
To see more commands, say “More Commands”.
% You can select the Trigger Words that start the Voice Control function. Alternatively you can turn on your TV using the Trigger Words if
Voice Control function is set to On.
− If the Trigger Words is set to Hi TV, say Hi TV Power On.
− If the Trigger Words is set to Smart TV, say Smart TV Power On.
Motion Control
Use a specific motion to switch the channel or adjust the volume level as well as to move the mouse pointer to a desired position while in web surfing with Smart Hub.
Menu SystemVoice and Motion ControlMotion Control
1
Set Motion Control to On.
2
TYou use the Motion Control, raise your hand unfolding it toward the screen, hold it for a moment and then wave it 3~4 times to the left and right. Motion Control starts. If the Motion Control starts, the cursor is
All
Pointing Navigation
Run
% Motion Control function can be affected recognition by user’s location, motion posture, or ambient brightness conditions. % If it doesn’t work, adjust the angle of TV camera by using Motion Control Environment Test (System
Motion Control → Motion Control Environment Test).
English - 3
displayed at the center of the screen and the Motion Guide Bar is at the bottom of the screen.
3
To switch the channel, point your hand to the channel up or down icon on the screen, and make a fist. If you hold the Run motion at the channel icon position, the channel will be changed continuously.
Voice and Motion Control
Page 4
Smart Hub
Using Smart Hub, you can stream movies, videos, and music from the Internet, access various for pay or free of-charge applications and view them on your TV.
Application content includes news, sports, weather forecasts, stock market quotes, maps, photos, and games.
For more detailed information about Smart Hub, see “Smart Hub” in e-Manual.
% The illustration of the manual may vary from the actual shape partially.
Method 1
Method 2
Menu SupportSmart Hub
Press the
button on the remote control.
Main Features
You can search for various
types of content that can be
used on your TV.
Displays the current input
source screen.
AccuWeather BBC News Youtube Skype Picasa
You can experience various
service provided by Samsung.
Channel SourceWeb Browser Schedule Manager AllShare Play
The displayed image may differ depending on the model.
Creating Your Samsung Account
If you have Samsung account, you can use Smart Hub easily.
1
Login
What is Samsung Account? A Samsung Account is an integrated
membership account that lets you access all the services provided
by Samsung through a single registered account.
Samsung account
Password
Press [Enter]
Press [Enter]
Remember my password
Sign me in automatically
Login
Face recognition Mode
Cancel
Create Account
R
Return
Press the button on the remote control, Press the red a button on the remote control to display the Login window.
2
When the Login window appears, select the Create Account button.
3
Move to the Samsung account field, and then press the E button. A window appears with an entry screen and a keypad. The ID must be a valid e-mail address in the following format: sample@sample.com or sample@sample.net. The same password in the confirm password field in the same fashion.
4
After entering all items, move to the Create Account item, and then the E button. Your account will be created.
Displays the recommended service by Samsung.
Search
Displays notices, new applications, and advertisements brought to you by Samsung product introductions.
Displays the installed applications in the TV.
Log In b Wallpaper T Tools R Return
a
% When using the Smart Touch Control, press the Return
Operation button
R
button to close the
button screen and use.
% If you have a Bluetooth or USB keyboard connected to the TV, enter your e-mail address
using a Bluetooth or USB keyboard. When done, enter the password in the same way.
Downloading an app from Samsung Apps
Samsung Apps is a store from which you can download applications to use on Samsung TV/AV equipment.
1
Press the button on the remote control, and select Samsung Apps on the screen.
2
Go to your desired category, and select an app.
3
In the information screen for the selected app that appears, choose Download to install it.
4
After it is downloaded, choose Run to launch and enjoy it.
% You can find the icon of the newly installed app on the SMART HUB screen. % Paid App in Samsung Apps Account registration is required.
English - 4
AccuWeather BBC News Youtube Skype Picasa
Channel Web Browser
BN68-04374A-04
Search
Schedule Manager
Source
Loading...