Samsung PCL 5415R, PCL 6215R, PCL545R User Manual

PCL545R
PCL5415R
PCL6215R

..................................................................................................................

PROJECTION TELEVISION

AA68-01413A(ENG)

.............

Owner’s
Instructions

Warning! Important

Safety Instructions

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates high voltage is present inside. It is
dangerous to make any kind of contact with any inside part of
this product.

This symbol alerts you that important literature concerning
operation and maintenance has been included with this product.

Note to CATV system installer: This reminder is provided to call CATV system
installer’s attention to Article 820-40 of the National Electrical Code (Section 54 of
Canadian Electrical Code, Part I), that provides guidelines for proper grounding
and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building as close to the point of cable entry as practical.

Caution: FCC/CSA regulations state that any unauthorized changes or modifica­tions to this equipment may void the user’s authority to operate it.

Caution: To prevent electric shock, match the wide blade of plug to the wide slot,
and fully insert the plug.

Attention: pour eviter les chocs electriques, introduire la lame le plus large de la
fiche dans la borne correspondante de la prise et pousser jusqu’au fond.

Important: One Federal Court has held that unauthorized recording of

copyrighted TV programs is an infringement of U.S. copyright laws.
Certain Canadian programs may also be copyrighted and any unauthorized

recording in whole or in part may be in violation of these rights.

To prevent damage which may result in fire or electric shock
hazard, do not expose this appliance to rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

SAFETY 1

Thank You for Choosing Samsung

Thank you for choosing Samsung! Your new Samsung Projection TV represents the latest in
television technology. We designed it with easy-to-use on-screen menus and closed captioning
capabilities, making it one of the best products in its class. We are proud to offer you a product
that will provide convenient, dependable service and enjoyment for years to come.

Important Safety Information

Always be careful when using your TV receiver. To reduce the risk of fire, electrical shock,
and other injuries, keep these safety precautions in mind when installing, using, and
maintaining your machine.

• Read all safety and operating instructions before operating your TV.

• Keep the safety and operating instructions for future reference.

• Heed all warnings on the TV receiver and in the operating instructions.

• Follow all operating and use instructions.

• Unplug the TV receiver from the wall outlet before cleaning. Use a damp cloth; do not use
liquid or aerosol cleaners.

• Never add any attachments and/or equipment without approval of the manufacturer. Such
additions can increase the risk of fire, electric shock, or other personal injury.

• Do not use the TV receiver where contact with or immersion in water is a possibility, such as
near bath tubs, sinks, washing machines, swimming pools, etc.

• Do not place the TV on an unstable cart, stand, tripod, bracket, or
table where it can fall. A falling TV can cause serious injury to a
child or adult, and serious damage to the appliance. Use only with
a cart, stand, tripod, bracket, or table recommended by the manu­facturer or sold with the TV. Follow the manufacturer’s instruc­tions when mounting the unit, and use a mounting accessory rec­ommended by the manufacturer. Move the TV and cart with care.
Quick stops, excessive force, and uneven surfaces can make the
unit and cart unsteady and likely to overturn.

• Provide ventilation for the TV receiver. The unit is designed with slots in the cabinet for
ventilation to protect it from overheating. Do not block these openings with any object, and
do not place the TV receiver on a bed, sofa, rug, or other similar surface. Do not place it near
a radiator or heat register. If you place the TV receiver on a rack or bookcase, ensure that
there is adequate ventilation and that you’ve followed the manufacturer’s instructions for
mounting.

• Operate your TV receiver only from the type of power source indicated on the marking label.
If you are not sure of the type of power supplied to your home, consult your appliance dealer
or local power company.

• Use only a grounded or polarized outlet. For your safety, this TV is equipped with a polarized
alternating current line plug having one blade wider than the other. This plug will fit into the
power outlet only one way. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug still does not fit, contact your electrician to replace your outlet.

• Protect the power cord. Power supply cords should be routed so that they won’t be walked on
or pinched by objects placed on or against them. Pay particular attention to cords at plugs, con­venience receptacles, and the point where they exit from the unit.

• Unplug the TV from the wall outlet and disconnect the antenna or cable system during a light­ning storm or when left unattended and unused for long periods of time. This will prevent dam­age to the unit due to lightning and power-line surges.

• Avoid overhead power lines. An outside antenna system should not be placed in the vicinity of
overhead power lines or other electric light or power circuits or where it can fall into such
power lines or circuits. When installing an outside antenna system, be extremely careful to keep
from touching the power lines or circuits. Contact with such lines can be fatal.

• Do not overload the wall outlet or extension cords. Overloading can result in fire or electric
shock.

• Do not insert anything through the openings in the unit, where they can touch dangerous volt­age points or damage parts. Never spill liquid of any kind on the TV.

• Ground outdoor antennas. If an outside antenna or cable
system is connected to the TV, be sure the antenna or
cable system is grounded so as to provide some
protection against voltage surges and built-up static
charges. Section 810 of the National Electrical Code,
ANSI/NFPA No.70-1984, provides information about
proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.

• Do not attempt to service the TV yourself. Refer all servicing to qualified service personnel.
Unplug the unit from the wall outlet and refer servicing to qualified service personnel under the
following conditions:

- when the power-supply cord or plug is damaged

- if liquid has been spilled on the unit or if objects have fallen into the unit

- if the TV has been exposed to rain or water

- if the TV does not operate normally by following the operating instructions

- if the TV has been dropped or the cabinet has been damaged

- when the TV exhibits a distinct change in performance

• If you make adjustments yourself, adjust only those controls that are covered by the operating
instructions. Adjusting other controls may result in damage and will often require extensive
work by a qualified technician to restore the TV to normal.

• When replacement parts are required, be sure the service technician uses replacement parts
specified by the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in additional damage to the unit.

• Upon completion of any service or repairs to this TV, ask the service technician to
perform safety checks to determine that the TV is in a safe operating condition.

2SAFETY

This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference that may cause undesired operation.

This television receiver provides display of television closed captioning in accordance with

§15.119 of the FCC rules.

EXAMPLE OF
ANTENNA GROUNDING

GROUND CLAMP

ELECTRIC
SERVICE
EQUIPMENT

NEC — NATIONAL ELECTRICAL CODE

GROUND CLAMPS

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)

ANTENNA
LEAD IN WIRE

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)

GROUNDING
CONDUCTORS
(NEC SECTION 810-21)

SAFETY 3

User Instructions

The Federal Communications Commission Radio
Frequency Interference Statement includes the follow­ing warning:
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pur­suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harm­ful interference in a residential installation. This equip­ment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to
radio communications. However, there is no guarantee
that interference will not occur in a particular installa­tion .

If this equipment does cause harmful interference to
radio or television receptions, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and
receiver.

• Connect the equipment into an outlet on a circuit dif­ferent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV tech­nician for help.

User Information

Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
If necessary, consult your dealer or an experienced
radio/television technician for additional suggestions.
You may find the booklet called How to Identify and
Resolve Radio/TV Interference Problems helpful. This
booklet was prepared by the Federal Communications
Commission. It is available from the U.S. Government
Printing Office, Washington, DC 20402, Stock Number
004-000-00345-4 .

Warning

User must use shielded signal interface cables to
maintain FCC compliance for the product.
Declaration of conformity for products marked with
FCC Logo. This device complies with Part 15 of the
FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired opera­tion.
The party responsible for product compliance:

SAMSUNG ELECTRONICS CO., LTD
America QA Lab of Samsung
85 West Tasman Drive
San Jose, CA 95134 USA
Tel) 408-544-5124
Fax) 408-544-5191
Provided with this monitor is a detachable power sup­ply cord with IEC320 style terminations. It may be
suitable for connection to any UL Listed personal com­puter with similar configuration. Before making the
connection, make sure the voltage rating of the comput­er convenience outlet is the same as the monitor and
that the ampere rating of the computer convenience
outlet is equal to or exceeds the monitor voltage rating.
For 120 Volt applications, use only UL Listed detach­able power cord with NEMA configuration 5-15P type
(parallel blades) plug cap. For 240 Volt applications use
only UL Listed Detachable power supply cord with
NEMA configuration 6015P type (tandem blades) plug
cap.

IC Compliance Notice

This Class B digital apparatus meets all requirements of
the Canadian Interference-Causing Equipment
Regulations of ICES-003.

Notice de Conformité IC

Cet appareil numérique de classe B respecte toutes les
exigences du Règlement ICES-003 sur les équipements
produisant des interférences au Canada.

MPR II Compliance

This monitor complies with SWEDAC (MPR II)
recommendations for reduced electric and magnetic
fields.

European Notice

Products with the CE Marking comply with both the
EMC Directive (89/336/EEC), (92/31/EEC),
(93/68/EEC) and the Low Voltage Directive
(73/23/EEC) issued by the Commission of the European
Community. Compliance with these directives implies
conformity to the following European Norms:

• EN55022 (CISPR 22) – Radio Frequency Interference

• EN50082-1 : 1992 – Electromagnetic Immunity

• EN60555-2 (IEC555-2) – Power Line Harmonics

• EN60555-3 (IEC555-3) – Voltage Fluctuations

• EN60950 (IEC950) – Product Safety.

FCC Information

CONTENTS

1 CONTENTS

Chapter 1: Your New TV . . . . . . . . . . . . . . .1.1

List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1

Familiarizing Yourself with Your New TV . . . . . . . . . . . . . . . . . . . . . 1.2

Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2

Front Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3

Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5

Chapter 2: Installation . . . . . . . . . . . . . . . . 2.1

Connecting VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . . 2.1

Antennas with 300-ohm Flat Twin Leads . . . . . . . . . . . . . . 2.1

Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . 2.2

Separate VHF and UHF Antennas. . . . . . . . . . . . . . . . . . . . 2.2

Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2

Cable without a Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . 2.2

Connecting to a Cable Box that Descrambles

All Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3

Connecting to a Cable Box that Descrambles

some Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3

Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5

Connecting a Second VCR to Record from the TV . . . . . . . 2.6

Connecting a Camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.6

Connecting a DVD (480i, 480p) Player . . . . . . . . . . . . . . . . . . . . . . 2.7

Connecting a DTV Set-Top Box (480p, 1080i) . . . . . . . . . . . . . . . . . 2.8

Connecting Surround Speakers

(PCL545R only) . . . . . .. . . . . . . 2.8

Installing Batteries in the Remote Control. . . . . . . . . . . . . . . . . . . . . 2.9

Chapter 3: Operation. . . . . . . . . . . . . . . . . . 3.1

Turning the TV On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1

Plug & Play Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.1

Using the Perfect Focus Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3

Adjusting Manual convergence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4

Adjust Red Convergence . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5

Viewing the Menus and On-Screen Displays. . . . . . . . . . . . . . . . . . . 3.6

Viewing the Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6

Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.6

Selecting a Menu Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.7

Selecting the Antenna Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.7

Memorizing the Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.8

Selecting the Video Signal-source . . . . . . . . . . . . . . . . . . . . 3.8

Storing Channels in Memory (Automatic Method) . . . . . . . 3.9

Adding and Erasing Channels (Manual Method) . . . . . . . . 3.9

Changing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.10

Using the Channel Buttons. . . . . . . . . . . . . . . . . . . . . . . . . 3.10

Using the Number Buttons. . . . . . . . . . . . . . . . . . . . . . . . . 3.10

Using the Previous Channel . . . . . . . . . . . . . . . . . . . . . . . . 3.10

Selecting Your Favorite Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.11

To Store Your Favorito Channels: . . . . . . . . . . . . . . . . . . . . 3.11

To View Your Favorite Channels: . . . . . . . . . . . . . . . . . . . . 3.11

Setting the Blue Screen Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.12

Labeling the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.13

Picture Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.14

Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.14

Using Automatic Picture Settings . . . . . . . . . . . . . . . . . . . . 3.15

Selecting the Color Tone. . . . . . . . . . . . . . . . . . . . . . . . . . . 3.16

CONTENTS 2

CONTENTS

Chapter 3: Operation (Cont.) . . . . . . . . . . 3.14

Sound Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.16

Adjusting the Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.16

Using Mute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.16

Customizing the Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.17

Using Automatic Sound Settings . . . . . . . . . . . . . . . . . . . . 3.18

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.19

Option 1: Setting the Clock Manually . . . . . . . . . . . . . . . . 3.19

Option 2: Using the Local PBS Channel to Automatically

Set the TV Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.20

Selecting a Signal Source (External A/V) . . . . . . . . . . . . . . . . . . . . . . 3.21

Chapter 4: Special Features . . . . . . . . . . . . 4.1

Fine Tuning Channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.1

Digital Noise Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2

Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.3

Using the R.surf Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.4

Setting the On/Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5

Setting the Sleep Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.6

Dolby Surround

(PCL545R only) . . . . . . . . . . . . . . . . . . . . . . 4.7

Choosing a Multi-Channel Sound (MTS) track. . . . . . . . . . . . . . . . . 4.8

Auto Volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9

Viewing Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.10

Viewing Picture-in-Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.11

Activating Picture-in-Picture. . . . . . . . . . . . . . . . . . . . . . . . 4.11

Selecting a Signal Source (Antenna or Cable) for PIP . . . . . 4.12

Selecting a Signal Source (External A/V) for PIP . . . . . . . . . 4.12

Swapping the Contents of the PIP image and Main image . 4.13

Changing the Size of the PIP Window . . . . . . . . . . . . . . . . 4.13

Changing the PIP Channel . . . . . . . . . . . . . . . . . . . . . . . . . 4.14

Changing the Location (Rotating) the PIP mode. . . . . . . . . 4.14

Scanning the Available Channels . . . . . . . . . . . . . . . . . . . . 4.14

Using the V-Chip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.15

Setting Up Your Personal ID Number (PIN) . . . . . . . . . . . . 4.15

How to Enable/Disable the V-Chip . . . . . . . . . . . . . . . . . . . 4.16

How to Set up Restrictions Using the “TV guidelines” . . . . 4.16

How to Set up Restrictions using the MPAA Ratings:

G, PG, PG-13, R, NC-17, X . . . . . . . . . . . . . . . . . . . . . . . . 4.18

How to Reset the TV after the V-Chip Blocks

a Channel (“Emergency Escape”) . . . . . . . . . . . . . . . . . . . . 4.19

Customizing Your Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . 4.20

Setting Up Your Remote Control to Operate Your

VCR or DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.20

Setting Up Your Remote Control to Operate Your

Cable Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.21

Chapter 5: Troubleshooting . . . . . . . . . . . . 5.1

Identifying Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.1

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . A.1

Cleaning and Maintaining Your TV. . . . . . . . . . . . . . . . . . . . . . . . . . A.1

Using Your TV in Another Country . . . . . . . . . . . . . . . . . . . . . . . . . A.1

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A.1

1.1 CHAPTER ONE: YOUR NEW TV

List of Features

Your Samsung TV was designed with the latest technology. This TV is a high-performance
unit that includes the following special features:

• Easy-to-use remote control

• Easy-to-use on-screen menu system

• Automatic timer to turn the TV on and off

• Adjustable picture and sound settings that can be stored in the TV’s memory

• Automatic channel tuning for up to 181 channels

• A special filter to reduce or eliminate reception problems

• Fine tuning control for the sharpest picture possible

• A built-in multi-channel sound decoder for stereo and bilingual listening

• Built-in, dual channel speakers

• A special sleep timer

• Picture-in-Picture

• Component Video Input jacks to obtain a sharper image from external sources

• Perfect Focus

Precautions When Moving and Installing the Unit

• This Projection Television is provided with casters at its­bottom so it can be moved easily. Depending on the
material of the floor, it may get scratched when the unit
is moved. Care should be taken when moving the unit.

• When you want to install the Projection Television in a
given location, or use it on the carpet, make sure to use
the accompanying caster trays (4 units). When placing
the caster tray beneath the casters, be sure your fingers
do not get caught.

Chapter One

YOUR NEW TV

CHAPTER ONE: YOUR NEW TV 1.2

Familiarizing Yourself with The TV

Front Panel Buttons

The buttons on the front panel control your TV’s basic features, including the on-screen
menu. To use the more advanced features, you must use the remote control.

YOUR NEW TV

Œ

Remote Control Sensor

Aim the remote control towards this spot on the
TV.

´

MENU

Press to see an on-screen menu of your TV's fea­tures.

ˇ

TV/VIDEO

Press this button to display a menu of all the avail­able signal sources. When the menu appears, use
the Joystick up or down to highlight a particular
source, and then move the joystick to the right to
select it.

¨

MUTE

Press to temporarily cut off the sound.

ˆ

Timer indicator

When the TV is turned on, the Timer indicator
blinks ten times.
This indicator illuminates when the Timer mode is
set to the “On” position after setting the clock and
either the On timer or Off timer, with the remote
control. Even if the power is turned off, this indi­cator stays lit. (Clock must be set before using this
function.)

Ø

POWER

Press to turn the TV on and off.

∏

VOL – , +

Press to increase or decrease the volume. Also
used to select items on the on-screen menu.

”

CH▼and CH▲

Press to change channels. Also press to highlight
various items on the on-screen menu.

1.3 CHAPTER ONE: YOUR NEW TV

YOUR NEW TV

Œ

PERFECT FOCUS

Press to adjust for the optimum picture set in the
Factory.

´

VIDEO INPUT jack

Use to connect a video signal from a camcorder
or a video game.

ˇ

AUDIO INPUT jacks

Use to connect the audio signals from a cam­corder or video game.

¨

S-VIDEO INPUT jack

Use to connect an S-Video signal from a cam­corder or a video game.

Front Panel Jacks

You can use the front panel jacks to connect an A/V component that is used only
occasionally, such as a camcorder or video game. (For information on connecting
equipment, see pages 2.1 – 2.8.)

CHAPTER ONE: YOUR NEW TV 1.4

YOUR NEW TV

Rear Panel Jacks

Use the rear panel jacks to connect an A/V component that will be connected continu­ously, such as a VCR or a DVD player.

Because there are two sets of input jacks, you can connect two different A/V components
(i.e., a VCR and a DVD, 2 VCRs, etc.)

For more information on connecting equipment, see pages 2.1 – 2.8.

Œ

ANTENNA terminals

Two independent cables or antennas can be
connected to these terminals. Use ANT-A and
ANT-B terminals to receive a signal from
VHF/UHF antennas or your cable system. Use
the ANT-A OUT terminal to send the signal being
received by the ANT-A terminal out to another
component (such as a Cable Set Top Box). The
PIP channel can be received only when a signal
source is connected to ANT-A.

´

S-VIDEO INPUT jack

Connect to an S-VHS VCR or DVD player.

ˇ

VIDEO INPUT jacks

Connect to the video output jacks of VCRs, DVD
players and similar devices (Two sets are avail­able: Video1 and Video2).

¨

AUDIO INPUT jacks

Connect to the audio output jacks of VCRs, DVD
players and similar devices.

ˆ

AUDIO-VIDEO MONITOR
OUTPUT jacks

Connect to the audio/video input jacks of a
recording VCR.
Note: The monitor out does not operate in DVD
or DTV mode.

Ø

COMPONENT 1(480i, 480p)
INPUT jacks

Connect a source that outputs 480i/480p Y,PBand
PRsignals, such as a DVD Player.

∏

COMPONENT 2(480p, 1080i)
INPUT jacks

Connect a source that outputs 480p/1080i Y,P

B

and PRsignals, such as a DTV Set-Top Box.

”

SURROUND OUT(PCL545R only)

Connects to a (optional) rear-surround amp:
Surround Left, Surround Right and Center.

1.5 CHAPTER ONE: YOUR NEW TV

YOUR NEW TV

Remote Control

You can use the remote control up to about 23 feet from the TV. When using the remote,
always point it directly at the TV.

You can also use your remote control to operate your VCR and cable box. See page 4.19
for details.

Œ

Power

Turns the TV on and off.

´

+100

Press to select channels over 100.
For example, to select channel
121, press “+100,” then press “2”
and “1.”

ˇ

Menu

Displays the main on-screen
menu.

¨

CH and CH
(Channel Up/Down)

Press CH or CH to change
channels.

VOL -, VOL +

Press increase or decrease the
volume.

ˆ

Mute

Press to temporarily cut off
the sound.

Ø

Display

Press to display the current chan­nel and the audio-video
settings.

∏

Aspect

Press to change the screen size.

”

Surround

(For model PCL545R only)
Selects one of Phantom modes
(Off, Normal, Phantom or Wide).

’

MTS (Multichannel
Television Stereo)

Press to choose stereo, mono or
Separate Audio Program (SAP
broadcast).

˝

MODE

Selects a target device to be con­trolled by the Samsung remote
control (i.e., TV, VCR, Cable box, or
DVD).

Ô

Pre-CH

Tunes to the previous channel.



TV/Video

Press to display all of the
available video sources (i.e.,
Antenna/cable, VCR, DVD,
Video1~3, S-Video 1~2, DVD, and
DTV).

Ò

Joystick

Use to select on-screen menu
items and change menu values.

Ú

Caption

Controls the caption decoder.

Æ

PIP

Activates picture in picture.

ı

Perfect Focus

Press to adjust for the optimum
picture set in the Factory.

˜

Fav. CH (Favorite
Channel)

Press to switch between your
favorite channels.

CHAPTER ONE: YOUR NEW TV 1.6

YOUR NEW TV

Remote Control (continued)

¯

ANT A/B

Press to select the ANT A or ANT
B.

˘

R.surf

Press to automatically return to a
preferred channel after a user­preset time delay.

¿

S.Mode

Adjust the TV sound by selecting
one of the preset factory settings
(or select your personal, cus­tomized sound settings).

¸

P.Mode

Adjust the TV picture by select­ing one of the preset factory set­tings (or select your personal,
customized picture settings).

˛

VCR controls

Controls VCR tape functions:
Rewind, Play, fast Forward, Stop,
Pause.

◊

PIP Controls

Source

Press to select one of the avail­able signal sources for the PIP
window.

Scan

Press to memorize (scan) the
available channels.

Locate

Press to move the PIP window to
any of the four corners of the TV
screen.

Swap

Exchanges the video signal that
is currently displayed on the
main screen with the signal in
the PIP window.

Size

Press to make the PIP window
small, large or double screen.

• Double window doesn’t func­tion on the models
PCL5415R/PCL6215R.

CH

Displays the available channels
in sequence. (These buttons
change channels in the PIP win­dow only).

±

V.chip

Press to set up and activate the
parental locks.

≠

Set

Used during set up of this
Samsung remote control, so that
it will work compatibly with
other devices (VCR, cable box,
DVD.)

–

Sleep

Press to select a preset time
interval for automatic shutoff.

—

Add/Erase

Press to add or erase channels
in the TV’s memory.

2.1 CHAPTER TWO: INSTALLATION

Connecting VHF and UHF Antennas

If your antenna has a set of leads that
look like this, see “Antennas with
300-ohm Flat Twin Leads,” below.

If your antenna has one lead that looks
like this, see “Antennas with 75-ohm
Round Leads,” on page 2.2.

If you have two antennas, see “Separate
VHF and UHF Antennas,” on page 2.2.

Antennas with 300-ohm Flat Twin Leads

If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300­ohm twin flat leads, follow the directions below.

Chapter Two

INSTALLATION

1

Place the wires from the
twin leads under the
screws on the 300-75
ohm adaptor (not sup­plied). Use a screwdriver
to tighten the screws.

2

Plug the adaptor into the
ANT-A or ANT-B terminal
on the rear panel.

2

CHAPTER TWO: INSTALLATION 2.2

Connecting Cable TV

You can connect different cable systems to your TV, including cable without a cable box,
and cable with a cable box that descrambles some or all channels.

Cable without a Cable Box

If you want to connect cable, and you do not need to use a cable box:

Plug the incoming cable
into the ANT-A or ANT-B
antenna terminal on rear
of the TV.

2

Plug the combiner into
the ANT-A or ANT-B ter­minal on the rear panel.

INSTALLATION

Antennas with 75-ohm Round Leads

Plug the antenna lead
into the ANT-A or ANT-B
terminal on the rear
panel.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine
the two antenna signals before connecting the antennas to the TV. This procedure requires a
an optional combiner-adaptor (available at most electronics shops).

1

Connect both antenna
leads to the combiner.

2.3 CHAPTER TWO: INSTALLATION

INSTALLATION

Cable with a Cable box that Descrambles All Channels

1

Find the cable that is
connected to the
ANTENNA OUT terminal
on your cable box. This
terminal might be
labeled “ANT OUT”,
“VHF OUT”, or simply,
“OUT”.

2

Connect the other end of
this cable to the ANT-A
or ANT-B terminal on the
rear of the TV.

▼

This terminal might be labeled
“ANT IN,” “VHF IN,” or simply,
“IN.”

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of
coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the
cable that is connected
to the ANTENNA IN ter­minal on your cable box.

2

Connect this cable to a
two-way splitter.

3

Connect a coaxial cable
between an OUTPUT ter­minal on the splitter and
the IN terminal on the
cable box.

CHAPTER TWO: INSTALLATION 2.4

INSTALLATION

4

Connect a coaxial cable
between the ANTENNA
OUT terminal on the
cable box and the B–IN
terminal on the A/B
switch.

5

Connect another cable
between the other OUT
terminal on the splitter
and the A–IN terminal on
the RF (A/B) switch.

6

Connect the last coaxial
cable between the OUT
terminal on the RF (A/B)
switch and the VHF/UHF
terminal on the rear of
the TV.

After you’ve made this connection, set the A/B switch to the “A” position for normal view­ing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the
A/B switch to “B,” you will need to tune your TV to the cable box’s output channel, which is
usually channel 3 or 4.)

2.5 CHAPTER TWO: INSTALLATION

INSTALLATION

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a
cable TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have
not yet connected to an antenna or a cable system.

1

Connect a coaxial cable between the
ANTENNA OUT terminal on the VCR
and the antenna terminal on the TV.

A coaxial cable is usually included with
a VCR. (If not, check your local elec­tronics store).

2

Connect a set of audio cables between
the AUDIO OUT jacks on the VCR and
the AUDIO jacks on the TV.

If you have mono VCR, connect
L(mono) to VCR audio out using only
one audio cable.

3

Connect a video cable between the
VIDEO OUT jack on the VCR and the
VIDEO jack on the TV.

If you have a S-VHS VCR, use the S­Video connections and remove the
video cable. Do not connect the video
cable and the S-Video cable to video 1
simultaneously.

Follow the instructions in “Viewing a
VCR or Camcorder Tape” to view your
VCR tape.

CHAPTER TWO: INSTALLATION 2.6

INSTALLATION

Connecting a Second VCR to Record from the TV

Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do
this, connect your second VCR as follows:

1

Connect a set of audio cables between
the AUDIO OUT jacks on the TV and the
AUDIO IN jacks on the VCR.

(The VCR input jacks might be
either on the front or rear of
the VCR.)

2

Connect a video cable between the
VIDEO OUT jack on the TV and the
VIDEO IN jack on the VCR.

Refer to your VCR’s instructions for
more information about how to record
using this kind of connection.

Connecting a Camcorder

The front panel jacks on your TV make it easy to connect a camcorder to your TV. They allow
you to view the camcorder tapes without using a VCR. (Also see “Selecting a Signal Source
(External A/V)” on page 3.21)

1

Locate the A/V output jacks on the
camcorder. They are usually found on
the side or rear of the camcorder.

2

Connect an audio cable between the
AUDIO OUTPUT jack on the camcorder
and the AUDIO terminals on the front of
the TV.

If you have mono camcorder, connect
L(mono) to camcorder audio out using
only one audio cable.

3

Connect a video cable between the
VIDEO OUTPUT jack on the camcorder
and the VIDEO terminal on the front of
the TV.

The audio-video cables shown here are
usually included with a Camcorder. (If
not, check your local electronics store.)
If your camcorder is stereo, you need to
connect a set of two cables.

2.7 CHAPTER TWO: INSTALLATION

INSTALLATION

Connecting a DVD (480i, 480p) Player

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.

Connecting Y, PB, P

R

1

Connect a set of audio cables between
the DVD audio in jacks on the TV and
the AUDIO OUT jacks on the DVD play­er.

2

To enable Component video viewing,
connect video cables between the Y, PB,
and PRinputs on the TV and Y, PB, and P

R

(or Y, CB, CR) outputs on the DVD player.

Note: For an explanation of
Component video, see your DVD play­er’s owner’s instruction.

Connecting audio and video jacks

1

Connect a set of audio cables between
the AUDIO IN jacks on the TV and the
AUDIO OUT jacks on the DVD player.

2

Connect video cables between the
VIDEO OUT jack on the DVD player and
the VIDEO IN jack on the TV.

CHAPTER TWO: INSTALLATION 2.8

Connecting a DTV Set-Top Box (480p, 1080i)

When switching to the DTV mode, either 480p or 1080i format is automatically selected
according to the input signal.

Note: Only 480p and 1080i formats are supported.

1

Connect a set of audio cables between
the DTV Set-Top Box audio in jacks on
the TV and the AUDIO OUT jacks on the
DTV Set-Top box.

2

To enable Component video viewing,
connect video cables between the Y, PB,
and PRinputs on the TV and Y, PB, and P

R

(or Y, CB, CR) outputs on the DTV Set-Top
box.

Note: For an explanation of
Component video, see your DTV Set­top box’s owner’s instruction.

Connecting Surround Speakers(PCL545R only)

1

Connect inputs of an amplifier to the
SURROUND OUT outputs of the TV.
Then connect the surround speakers to
your amp.

INSTALLATION