Samsung P1010 Disassembly and assembly Instructions 6

Page 1
Level
7.
Disassembly and Assembly Instructions
7-1.
Repair
2
7-1-1.
1
Disassembly
loosen the screw(2 points)
disassembly FRONT Ass`y
2
L
Loosen the2points of screw(triangle screw)
screw:
3
1.7 *3.5 (
disassembly the FRONT Ass`y from REAR
Torque
1.35 +-0.15)
Use diassembly JIG, loosen the hook
4
disassembly the battery connector
Disassembly the FRONT Ass`y from REAR
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Loosen the screw, and use assembly JIG, disassembly
battery connector.(screw:
7-1
1.4 *3
Torque
1.1+-0.1)
Page 2
Level2Repair
7.
5
loosen the screw
disassembly the connector
6
Loosen the7points of screw
screw:
7
1.4 *3
take off the PBA from the FRONT Ass`y
Torque
1.1+-0.1
Disassembly connector. be careful, do not damage connector.
8
take off the PBA from the FRONT Ass`y
Take off the PBA from the FRONT Ass`y Take off the PBA from the FRONT Ass`y
7-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Page 3
disassembly the LCD con to con FPCB
9
Level2Repair
7.
Do not damage the FPCB, be careful.
7-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Page 4
Level2Repair
7.
7-1-2.
1
Assembly
Assembly bracket, LCD, TSP
assembly the LCD con to con FPCB
2
Use the assembly JIG, attach the TSP Attach LCD con to con tape and fix it
3
Place the PBA on the Front Ass`y
Place the PBA on the Front Ass`y
4
assembly connector
Assembly connector and tighten the screw(7 points)
screw:
1.4 *3
Torque
1.1+-0.1
7-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Page 5
assembly the battery connector
5
Assembly Front Ass`y and Rear
6
Level2Repair
7.
Assembly the battery connector and tighten the
serew(screw:
7
Assembly Front Ass`y and Rear
1.4 *3
Torque
1.1+-0.1)
Assembly the Front Ass`y and Rear
8
tighten screw(2points)
Check side gap
Tighten screw(2points)
screw:
1.7 *3.5 (
Torque
1.35 +-0.15)
7-5
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Loading...