ENG This user manual includes detailed usage instructions
for your camera. Please read this manual thoroughly.
Copyright information
•
Microsoft Windows and the Windows logo are registered trademarks of
the Microsoft Corporation.
•
Mac and Apple App Store are registered trademarks of the Apple
Corporation.
•
Google Play Store is a registered trademark of Google, Inc.
•
Adobe, the Adobe logo, Photoshop and Lightroom are either registered
trademarks or trademarks of Adobe Systems Incorporated in the United
States and/or other countries.
•
microSD™, microSDHC™, and microSDXC™ are registered trademarks of
the SD Association.
•
HDMI, the HDMI logo, and the term "High
Denition Multimedia Interface" are
trademarks or registered trademarks of HDMI
Licensing LLC.
•
Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are registered
trademarks of the Wi-Fi Alliance.
•
Trademarks and trade names used in this manual are the property of
their respective owners.
•
Camera specications or contents of this manual may be changed
without prior notice due to upgrade of camera functions.
•
You are not allowed to reuse or distribute any part of this manual
without prior permission.
•
We recommend using your camera within the country where you
purchase it.
•
Use this camera responsibly and adhere to all laws and regulations
concerning its use.
PlanetFirst represents Samsung Electronics' commitment to
sustainable development and social responsibility through
eco-driven business and management activities.
1
Health and safety information
Always comply with the following precautions and usage tips to avoid
dangerous situations and ensure peak performance of your camera.
Warning—situations that could cause injury to yourself
or others
Do not disassemble or attempt to repair your camera.
This may result in electric shock or damage to the camera.
Do not use your camera near ammable or explosive gases
and liquids.
This may cause a re or explosion.
Do not insert ammable materials into the camera or store
these materials near the camera.
This may cause a re or electric shock.
Do not handle your camera with wet hands.
This may result in electric shock.
Prevent damage to subjects’ eyesight.
Do not use the ash in close proximity (closer than 1 m/3 ft) to people or
animals. If you use the ash too close to your subject’s eyes, this can cause
temporary or permanent eyesight damage.
Keep your camera away from small children and pets.
Keep your camera and all accessories out of the reach of small children
and animals. Small parts may cause choking or serious injury if swallowed.
Moving parts and accessories may present physical dangers as well.
Do not expose the camera to direct sunlight or high
temperatures for an extended period of time.
Prolonged exposure to sunlight or extreme temperatures can cause
permanent damage to your camera’s internal components.
Avoid covering the camera or charger with blankets or clothes.
The camera may overheat, which may distort the camera or cause a re.
Do not handle the power supply cord or go near the charger
during a thunderstorm.
This may result in electric shock.
2
Health and safety information
If liquid or foreign objects enter your camera, immediately
disconnect all power sources, such as the battery or charger,
and then contact a Samsung service center.
Comply with any regulations that restrict the use of a camera
in a certain area.
•
Avoid interference with other electronic devices.
•
Turn o the camera when in an aircraft. Your camera can cause
interference with aircraft equipment. Follow all airline regulations and
turn o your camera when directed by airline personnel.
•
Turn o the camera near medical equipment. Your camera can interfere
with medical equipment in hospitals or health care facilities. Follow all
regulations, posted warnings, and directions from medical personnel.
Avoid interference with pacemakers.
Maintain the distance between this camera and all pacemakers to avoid
potential interference, as recommended by the manufacturer and
research groups. If you have any reason to suspect that your camera is
interfering with a pacemaker or other medical device, turn o the camera
immediately and contact the manufacturer of the pacemaker or medical
device for guidance.
Caution—situations that could cause damage to your
camera or other equipment
Remove the batteries from your camera when storing it for an
extended period of time.
Installed batteries may leak or corrode over time and cause serious
damage to your camera.
Use only authentic, manufacturer-recommended,
Lithium-ion replacement batteries. Do not damage or heat the
battery.
Inauthentic, damaged, or heated batteries may cause a re or personal
injury.
Use only Samsung-approved batteries, chargers, cables, and
accessories.
•
Using unauthorized batteries, chargers, cables, or accessories can cause
batteries to explode, damage your camera, or cause injury.
•
Samsung is not responsible for damage or injuries caused by
unapproved batteries, chargers, cables, or accessories.
Use the battery only for its intended purpose.
Misusing the battery may cause a re or electric shock.
3
Health and safety information
Do not touch the ash while it res.
The ash is very hot when red and may burn your skin.
When you use the AC charger, turn o the camera before you
disconnect the power to the AC charger.
Failing to do so may result in re or electric shock.
Disconnect the charger from the wall socket when not in use.
Failing to do so may result in re or electric shock.
Do not use a damaged power supply cord, plug, or loose outlet
when you charge batteries.
This may cause a re or electric shock.
Do not allow the AC charger to come in contact with the +/terminals on the battery.
This may cause a re or electric shock.
Do not drop or subject the camera to strong impacts.
Doing so may damage the screen or external or internal components.
Exercise caution when you connect cables and install batteries
and memory cards.
If you force the connectors, improperly connect cables, or improperly
install batteries and memory cards, you can damage ports, connectors,
and accessories.
Keep cards with magnetic strips away from the camera case.
Information stored on the card may be damaged or erased.
Never use a damaged battery, or memory card.
This may result in electric shock or camera malfunction or cause a re.
Do not place the camera in or near magnetic elds.
Doing so may cause the camera to malfunction.
Do not use the camera if the screen is damaged.
If the glass or acrylic parts are broken, visit a Samsung service center to
have the camera repaired.
4
Health and safety information
Check that the camera is operating properly before use.
The manufacturer takes no responsibility for any loss of les or damage
that may result from camera malfunction or improper use.
You must plug the small end of the USB cable into your
camera.
If the cable is reversed, it may damage your les. The manufacturer is not
responsible for any loss of data.
Do not expose the lens to direct sunlight.
This may discolor the image sensor or cause it to malfunction.
If the camera overheats, remove the battery and allow it to
cool down.
•
Prolonged usage of the camera may overheat the battery and raise
the internal temperature of the camera. If the camera stops operating,
remove the battery and allow it to cool down.
•
High internal temperatures may result in noise in your photos. This is
normal and does not aect your camera’s overall performance.
Avoid interference with other electronic devices.
Your camera emits radio frequency (RF) signals that may interfere
with unshielded or improperly shielded electronic equipment, such as
pacemakers, hearing aids, medical devices, and other electronic devices in
homes or vehicles. Consult the manufacturers of your electronic devices
to solve any interference problems you experience. To prevent unwanted
interference, use only Samsung-approved devices or accessories.
Use your camera in the normal position.
Avoid contact with your camera’s internal antenna.
Data transference and your responsibilities
•
Data transferred via WLAN could be leaked, so avoid transferring
sensitive data in public areas or on open networks.
•
The camera manufacturer is not liable for any data transfers that infringe
on copyrights, trademarks, intellectual property laws, or public decency
ordinances.
5
Indications used in this manual
Icons used in this manual
IconFunction
Additional information
Safety warnings and precautions
[ ]
( )
Camera buttons. For example, [Shutter] represents the
shutter button.
Page number of related information
The order of options or menus you must select to perform
a step; for example: Select b
A correct posture for stabilizing the camera is necessary for taking a good
photo. Even if you hold a camera correctly, the wrong posture can cause
the camera to shake. Stand up straight and remain still to maintain a
steady base for your camera. When shooting with a slow shutter speed,
hold your breath to minimize body movement.
Holding the camera
Hold the camera with your right hand and place your right index nger on
the shutter button. Place your left hand under the lens for support.
Standing photography
Compose your shot; stand up straight with your feet shoulder-length
apart, and keep your elbows pointed down.
13
Concepts in Photography
Crouching photography
Compose your shot, crouch with one knee touching the ground, and keep
a straight posture.
Using the display
Swing the display outwards 180° and rotate it up or down for high-and
low-angle photos or self portraits (
maximum of 90° downward or 180° upward (
display 180° upward and fold it (
). You can rotate the display a
). You can also rotate the
).
• Keep the display closed when the camera is not in use.
• Tilt the display only within the angle allowed. Failing to do so may
damage your camera.
• Use the Wi-Fi functions when the display is set as shown in
illustrations
and .
14
Concepts in Photography
Low-angle shot
A low-angle shot is a shot from a camera positioned below your eyeline,
looking up the subject.
High-angle shot
A high-angle shot is a shot from a camera positioned above your eyeline,
looking down on the subject.
15
Concepts in Photography
Aperture
The aperture, a hole that controls the amount of light that enters the
camera, is one of the three factors that determine the exposure. The
aperture housing contains thin, metal plates that open and close to let
light through the aperture and into the camera. The size of the aperture
is closely related to the brightness of a photo: the larger the aperture, the
brighter the photo; the smaller the aperture, the darker the photo.
Aperture sizes
Minimum apertureMedium aperture Maximum aperture
The size of the aperture is represented by a value known as an "F-number."
The f-number represents the focal length divided by the diameter of the
lens. For example, if a lens with a 50 mm focal length has an f-number of
F2, the diameter of the aperture is 25 mm. (50 mm/25 mm = F2)
The smaller the f-number, the greater the size of the aperture.
The opening in the aperture is described as the Exposure Value (EV).
Increasing the Exposure Value (+1 EV) means the amount of light doubles.
Decreasing the Exposure Value (-1 EV) means the amount of light halves.
You can also use the exposure compensation feature to ne-tune the
amount of light by subdividing exposure values into 1/2, 1/3 EV, and so on.
+1 EV
F1.4F2F2.8F4F5.6F8
-1 EV
Exposure Value Steps
Darker photo
(aperture opened slightly)
Brighter photo
(aperture opened wide)
16
Concepts in Photography
Aperture value and the depth of eld
You can blur or sharpen the background of a photo by controlling the
aperture. It is closely related to the depth of eld (DOF), which can be
expressed as small or large.
A photo with a large DOF A photo with a small DOF
The aperture housing contains several blades. These blades move together and
control the amount of light passing through the center of the aperture. The
number of blades also aects the shape of light when shooting night scenes. If
an aperture has an even number of blades, light divides into an equal number
of sections. If the number of blades is odd, the number of sections is double the
number of blades.
For example, an aperture with 8 blades divides light into 8 sections and an
aperture with 7 blades into 14 sections.
7 blades 8 blades
17
Concepts in Photography
Shutter speed
Shutter speed refers to the amount of time it takes to open and close the
shutter, and it is an important factor in the brightness of a photo, as it
controls the amount of light which passes through the aperture before it
reaches the image sensor.
Usually, the shutter speed is manually adjustable. The measurement of the
shutter speed is known as the "Exposure Value" (EV), which is marked in
intervals of 1 s, 1/2 s, 1/4 s, 1/8 s, 1/15 s, 1/1,000 s, 1/2,000 s, and so on.
+1 EV
Exposure
-1 EV
Therefore, the faster the shutter speed, the less light will be let in. Likewise,
the slower the shutter speed, the more light will be let in.
As the photos below illustrate, a slow shutter speed allows more time
to let light in, so the photo becomes brighter. On the other hand, a fast
shutter speed allows less time to let light in and the photo becomes
darker and more easily freezes subjects in motion.
0.8 s0.004 s
1 s1/2 s1/4 s1/8 s1/15 s1/30 s
Shutter Speed
18
Concepts in Photography
ISO sensitivity
The exposure of an image is determined by the sensitivity of the camera.
This sensitivity is based on international lm standards, known as ISO
standards. On digital cameras, this sensitivity rating is used to represent
the sensitivity of the digital mechanism that captures the image.
ISO sensitivity doubles as the number doubles. For example, an
ISO 200 setting is capable of capturing images at twice the speed of an
ISO 100 setting. However, higher ISO settings can result in "noise"—small
specks, spots, and other phenomena in a photo that give the shot a noisy
or dirty appearance. As a general rule, it is best to use a low ISO setting
to prevent noise in your photos, unless you are shooting in darkened
environments or at night.
Because a low ISO sensitivity means the camera will be less sensitive to
light, you need more light to have an optimal exposure. When using a low
ISO sensitivity, open the aperture more or reduce the shutter speed to
allow more light to enter the camera. For example, on a sunny day when
light is abundant, a low ISO sensitivity does not require a slow shutter
speed. However, in a dark place or at night, a low ISO sensitivity will
result in a blurry photo. Therefore, it is recommended to increase the ISO
sensitivity by a moderate amount.
A photo captured with a tripod and high
ISO sensitivity
A blurred photo with a low ISO sensitivity
Changes in the quality and brightness according to ISO sensitivity
19
Concepts in Photography
How the aperture setting, shutter speed,
and ISO sensitivity control exposure
The aperture setting, shutter speed, and ISO sensitivity are closely
interconnected in photography. The aperture setting controls the opening
that regulates the light that enters the camera, while the shutter speed
determines the length of time that light is allowed to enter. ISO sensitivity
determines the speed at which the lm reacts to light. Together, these
three aspects are described as the triangle of exposure.
A change in shutter speed, aperture value, or ISO sensitivity can be oset
by adjustments to the others to maintain the amount of light. The results,
however, change according to the settings. For example, shutter speed is
useful in expressing movement, aperture can control the depth of eld,
and ISO sensitivity can control the graininess of a photo.
SettingsResults
Wide aperture
Aperture
value
= more light
Narrow aperture
= less light
Shutter speed
ISO sensitivity
SettingsResults
Fast speed
= less light
Slow speed
= more light
Fast = still
Slow = blurry
High sensitivity
= more sensitive to light
Low sensitivity
= less sensitive to light
High = more grainy
Low = less grainy
Wide = small depth of eld
Narrow = large depth of eld
20
Concepts in Photography
Correlation between focal length, angle,
and perspective
Focal length, which is measured in millimeters, is the distance between
the middle of the lens to its focal point. It aects the angle and perspective
of captured images. A short focal length translates into a wide angle,
which allows you to capture a wide shot. A long focal length translates
into a narrow angle, which allows you to capture telephoto shots.
Short focal length
wide-angle lens
wide shot
wide angle
Long focal length
telephoto lens
telephoto shot
narrow angle
Look at these photos below and compare the changes.
18 mm angle55 mm angle200 mm angle
Normally, a lens with a wide angle is suitable for shooting landscapes and a lens
with a narrow angle is recommended for shooting sports events or portraits.
21
Concepts in Photography
Depth of eld
Portraits or still-life photos mostly acclaimed by people are the ones on
which the background is out of focus so the subject looks pronounced.
Depending on the focused areas, a photo can be blurred or sharpened.
This is called ‘a low DOF’ or ‘a high DOF’.
The depth of eld is the focused area around the subject. Therefore, a
small DOF signies that the focused area is narrow and a large DOF means
the focused area is wide.
A photo with a small DOF, which stresses the subject and makes the rest
of it blurred, can be obtained by using a telescope lens or selecting a low
aperture value. Conversely, a photo with a large DOF which shows all the
elements on the photo sharply focused can be achieved by using a wide
angle lens or selecting a high aperture value.
What controls out-of-focus eects?
DOF depends on aperture value
The wider the aperture is (namely the lower the aperture value), the lower
the DOF becomes. Under the condition where the other values including
shutter speed and ISO sensitivity are equal, a low aperture value leads to a
photo with a low DOF.
55 mm F5.755 mm F22
Small Depth of FieldLarge Depth of Field
22
Concepts in Photography
DOF depends on focal length
The longer the focal length is, the lower the DOF gets. A telescope lens
with a longer focal length than a wide-angle lens with a short focal length
is better to capture a photo of a low DOF.
A photo captured with a 18 mm
wide-angle lens
A photo captured with a 100 mm telescope
lens
DOF depends on the distance between the subject and the
camera
The shorter the distance between the subject and the camera is, the lower
the DOF gets. Therefore, taking a photo close to a subject can result in a
photo of low DOF.
A photo captured with a 100 mm telescope lens
A photo captured close to the subject
23
Concepts in Photography
DOF preview
You can press [Depth preview] to get an idea of what your shot will look
like before shooting. The camera adjusts the aperture to the predened
settings and shows the results on the screen. Set the function of the Depth
preview button to Optical Preview. (p. 161)
Composition
It is fun to capture a photo of the beauty of world with a camera. No
matter how the world is beautiful, however, a poor composition cannot
capture the beauty of it.
When it comes to composition, it is very important to prioritize subjects.
Composition in photography means arranging objects in a photo. Usually,
abiding by the rule of thirds leads to a good composition.
Rule of Thirds
To use the rule of thirds, divide the image into a 3x3 pattern of equal
rectangles.
To compose photos that best emphasize the subject, make sure the
subject is located at one of the corners of the center rectangle.
24
Concepts in Photography
Using the rule of thirds will create photos with stable and compelling
compositions. Below are a few examples.
Photos with two subjects
If your subject is in one corner of the photo, it creates an unbalanced
composition. You can stabilize the photo by capturing a second subject in
the opposite corner to balance the weight of the photo.
Subject 2
Subject 1
UnstableStable
Subject 1
When taking landscape photos, centering the horizon will create an
unbalanced eect. Give more weight to the photo by moving the horizon
up or down.
Subject 1
Subject 2
Subject 1
Subject 2
Subject 2
UnstableStable
25
Concepts in Photography
Flash
Light is one of the most important components in photography. It is not
easy, however, to have an enough amount of light anytime and anywhere.
Making use of a ash allows you to optimize light settings and create a
variety of eects.
Flash, also known as strobe or speed light, helps to create adequate
exposure in low-light conditions. It is also useful in light-abundant
situations. For example, ash can be used in compensating the exposure
of a subject’s shadow or capturing clearly both the subject and the
background in backlit conditions.
Before correctionAfter correction
Flash guide number
The model number of a ash refers to the ash’s power, and the maximum
amount of light created is represented by a value known as a "guide
number." The bigger the guide number, the more light is emitted from the
ash. The guide number is achieved by multiplying the distance from the
ash to the subject and the aperture value when the ISO sensitivity is set
to 100.
Guide number = Flash to Subject Distance X Aperture value
Aperture value = Guide number/Flash to Subject Distance
Flash to Subject Distance = Guide number/Aperture value
Therefore, if you know the guide number of a ash, you can estimate an
optimum ash to subject distance when setting the ash manually. For
example, if a ash has a guide number of GN 20 and is 4 meters away from
the subject, the optimal aperture value is F5.0.
26
Concepts in Photography
Bounce Photography
Bounce photography refers to the method of bouncing light o of the
ceiling or walls so that the light spreads evenly over the subject. Normally,
photos captured with ash may appear unnatural and cast shadows.
Subjects in photos captured with bounce photography cast no shadows
and look smooth due to evenly spread light.
27
Chapter 1
My Camera
Learn about your camera’s layout, display icons, lens, optional accessories,
and basic functions.
My Camera
Getting started
Unpacking
Check your product box for the following items.
Camera
(including the body cap and hot-shoe
cover)
Software CD-ROM
(User manual included)
•
The illustrations may dier from your actual items.
•
You can purchase optional accessories at a retailer or a Samsung service center. Samsung is not responsible for any
problems caused by using unauthorized accessories. For information about accessories, refer to page 206.
speed or aperture value in some
shooting modes or change the size of
a focus area.
• In Playback mode: View thumbnails
or enlarge or reduce a photo. Open
or close a folder of continuous or
burst shots in Playback mode. Scan
backward or forward a video.
Mode dial
• t: Smart Auto mode (p. 52)
• P: Program mode (p. 54)
• A: Aperture Priority mode (p. 56)
• S: Shutter Priority mode (p. 57)
• M: Manual mode (p. 58)
• T: Custom mode 1 (p. 59)
• U: Custom mode 2 (p. 59)
• i: Lens Priority mode (p. 60)
• s: Smart mode (p. 63)
• B: Wireless Network (p. 129)
No.Name
Hot-shoe
4
Built-in ash (p. 99)
5
Flash pop-up button (p. 99)
6
Microphone
7
Lens release button
8
Image sensor
9
Lens mount
10
Depth preview button (p. 24)
11
Lens mount index
12
AF-assist light/Timer lamp
13
Power switch
14
Shutter button
15
Metering button (p. 102)
16
DIRECT LINK button: Start a preset Wi-Fi
17
function. (p. 33)
Hot-shoe cover
3
30
My Camera > Camera layout
14
13
12
11
10
No.Name
Drive dial
• H: Single (p. 93)
• J: Continuous (p. 93)
1
2
3
4
5
6
7
9
8
1
• K: Timer (p. 94)
• L: Bracketing (p. 95)
Video recording button
2
Start recording a video.
EV adjust button (p. 107)
Press and hold the button, and then scroll
3
the jog dial to adjust the exposure value.
AEL button (p. 108)
• In Shooting mode: Lock the adjusted
4
5
6
7
exposure value or focus.
• In Playback mode: Protect the selected
le.
Fn button
Access the Smart panel and ne-tune
some settings.
o button
• In the Menu screen: Save the selected
options.
• In Shooting mode: Allow you to select
a focus area manually in some shooting
modes.
Delete/Custom button
• In Shooting mode: Perform the
assigned function. (p. 161)
• In Playback mode: Delete les.
No.Name
Navigation button (Smart dial)
• In Shooting mode
- D: Change the information on the
display.
- I: Select an ISO value.
8
9
10
11
12
13
14
- C: Select a White Balance option.
- F: Select an AF mode.
• In other situations
Move up, down, left, right, respectively.
(You can also rotate the navigation
button.)
Playback button
Enter Playback mode to view pictures or
videos.
Status lamp
Indicate the status of the camera.
• Blinking: When saving a photo,
shooting a video, sending data to a
computer, connecting to WLAN, or
sending a photo.
• Steady: When there is no data transfer,
when data transfer to a computer is
complete, or charging the battery.
MENU button
Access options or menus.
Proximity sensor (p. 162)
Viewnder (p. 33)
Eye-cup
31
My Camera > Camera layout
No.Name
Diopter adjustment dial (p. 33)
1
1
2
3
4
5
6
7
Eyelet for camera strap
2
External mic port
3
Insert an external mic. (optional)
Speaker
4
NFC tag
5
HDMI port
6
USB and shutter release port
Connect the camera to a computer or shutter release. Use a shutter release cable with a tripod
7
to minimize camera movement.
Battery chamber/Memory card cover
8
Insert a memory card and battery.
Display (touch screen)
• To take photos at high or low angles, tilt the display up or down. (p. 14)
9
• Touch the screen to select a menu or an option. (p. 38)
Internal antenna
10
* Avoid contact with the internal antenna while using the wireless network.
11
10
Tripod mount
11
9
8
32
My Camera > Camera layout
Adjusting the viewnder angle and the diopter
Adjust the angle of the viewnder to take photos at low angles. Pull out the viewnder gently(➊)
and tilt it to adjust the angle(➋).
The diopter adjustment dial is accessible when you pull out the viewnder. If the image is not
clear through the viewnder, rotate the diopter adjustment dial to improve the image.
Using the DIRECT LINK button
You can turn on the Wi-Fi feature conveniently by pressing [DIRECT LINK].
Press [DIRECT LINK] again to return to the previous mode.
Setting the DIRECT LINK button
You can select a Wi-Fi function to launch when you press [DIRECT LINK]. (p. 161)
To set a DIRECT
LINK option,
In Shooting mode, press [m] ĺ d ĺ Key Mapping ĺDIRECT LINKĺ an option.
33
My Camera
Inserting the battery and memory card
Learn how to insert the battery and an optional memory card into the
camera.
Insert a memory card with the goldcolored contacts facing down.
Memory card
Insert the battery with the Samsung logo
facing up.
Removing the battery and memory card
Battery lock
Rechargeable battery
Memory card
Slide the lock down to release the battery.
Push the card gently until it disengages
from the camera, and then pull it out of
the slot.
Using the memory card adapter
Rechargeable battery
To use micro memory cards with this product, a PC, or a memory
card reader, insert the card into an adapter.
While the status lamp of the camera is blinking, do not remove the memory card
or battery. Doing so may damage the data stored on the memory card or your
camera.
34
My Camera
Charging the battery and turning on your camera
Charging the battery
Before you use the camera for the rst time, you must charge the battery.
Plug the small end of the USB cable into your camera, and then plug the
other end of the USB cable into the AC adapter.
Status lamp
• Red light on: Charging
• Red light o: Fully charged
• Red light blinking: Charging Error
•
Use only the AC adapter and USB cable supplied with your camera. If you use
another AC adapter, the camera battery may not charge or work properly.
•
You can charge the battery with the USB cable only when the camera is turned
o.
Turning on your camera
Set the Power switch to ON.
•
To turn your camera o, set the Power switch to OFF.
•
The initial setup screen appears when you turn on the camera for the
rst time. (p. 36)
35
My Camera
Performing the initial setup
When you turn on your camera for the rst time, the initial setup screen
appears. The language is preset for the country or region where the
camera is sold. You can change the language as desired. You can also select
an item by touching it on the screen.
Press [I] to select Time Zone, and then press [o].
1
Press [D/I] to select a time zone, and then press [o].
2
BackSet
Time Zone
[GMT +00:00] London
[GMT -01:00] Cape Verde
[GMT -02:00] Mid-Atlantic
[GMT -03:00] Buenos Aires, Sao Paulo
[GMT -03:30] Newfoundland
Press [I] to select Date Settings, and then press [o].
3
Press [C/F] to select an item (Year/Month/Day).
4
Press [D/I] to set the option, and then press [o].
5
BackSet
Set date
YearMonthDay
•
The screen may dier depending on the language selected.
Press [I] to select Time Settings, and then press [o].
6
Press [C/F] to select an item (Hr/Min/DST).
7
Press [D/I] to set the option, and then press [o].
8
Back
Set time
Set
DSTHrMin
36
My Camera > Performing the initial setup
Press [I] to select Date Type, and then press [o].
9
Press [D/I] to select a date type, and then press [o].
10
BackSet
Language
Time Zone
Date Type
Date Settings
YYYY/MM/DD
Time Settings
MM/DD/YYYY
DD/MM/YYYY
Date Type
Press [I] to select Time Type, and then press [o].
11
Press [D/I] to select a time type, and then press [o].
12
Time Zone
Date Settings
Time Settings
Date Type
Time Type
Time Type
12H
24H
English
London
BackSet
London
2014/01/01
10:00 AM
Press [m] to nish the initial setup.
13
37
My Camera
Selecting functions (options)
Selecting with buttons
Scroll the jog dial or rotate the navigation button or press
[D/I/C/F] to move, and then press [o] to select an option.
Selecting by touch
Do not use sharp objects, such as pens or pencils, to touch the screen. You can
damage the screen.
Dragging: Touch and hold an area on
the screen, and then drag your nger.
Touching: Touch an icon to select a
menu or an option.
Flicking: Gently ick your nger
across the screen.
38
My Camera > Selecting functions (options)
•
When you touch or drag the screen, discolorations may occur. This is not a
malfunction, but a characteristic of the touch screen. Touch or drag lightly to
minimize the discolorations.
•
The touch screen may not work properly if you use the camera in extremely
humid environments.
•
The touch screen may not work properly if you apply screen protection lm
or other accessories to the screen.
•
Depending on the viewing angle, the screen may appear dim. Adjust the
brightness or viewing angle to improve the resolution.
Using m
Press [m] or touch on the screen, and then change shooting
options or settings.
E.g. Selecting the photo size in P mode
Rotate the mode dial to P.
1
Press [m] or touch .
2
Scroll the jog dial or rotate the navigation button or press
3
[D/I] to move to b, and then press [o].
•
You can also touch b on the screen.
Scroll the jog dial or rotate the navigation button or press
4
[D/I] to move to Photo Size, and then press [o].
•
You can also drag the option list, and then touch an option.
BackSelect
AutoShare
Photo Size
Quality
ISO
Minimum Shutter Speed O
39
My Camera > Selecting functions (options)
Scroll the jog dial or rotate the navigation button or press
5
[D/I] to move to an option, and then press [o].
•
You can also drag the option list, and then touch an option.
•
Press [m] or touch Back to go back to the previous menu.
BackSet
AutoShare
Photo Size
Photo Size
Quality
ISO
Minimum Shutter Speed
Press [m] or touch Back to switch to Shooting mode.
6
(3:2) (5472x3648)
(3:2) (3888x2592)
(3:2) (2976x1984)
(3:2) (1728x1152)
(16:9) (5472x3080)
Using the Smart panel
Press [f] or touch on the screen to access some functions such as
Exposure, ISO, and White Balance.
E.g. Adjust the exposure value in P mode
Rotate the mode dial to P.
1
Press [f] or touch .
2
40
My Camera > Selecting functions (options)
Rotate the navigation button or press [D/I/C/F]
3
to move to EV, and then press [o].
•
You can directly select an option by scrolling the jog dial without
having to press [o].
•
You can also select an option by touching it.
Back
EV : 0.0
Adjust
You can adjust some options by
dragging them.
Scroll the jog dial or rotate the navigation button or press
4
[C/F] to adjust the exposure value, and then press [o].
•
You can also drag the dial on the screen, and then touch Set to
adjust the option.
BackSet
EV : 0.0
41
My Camera
Display icons
In Shooting mode
Capturing photos
London
1. Shooting information
IconDescription
Shooting mode
Current date
Current time
GPS activated*
London
100%
Location information*
Notication panel bar
Memory card not inserted**
Auto exposure lock (p. 108)
Auto focus lock (p. 108)
Available number of photos
Battery percentage
IconDescription
• : Fully charged
• : Partially charged
1
2
3
* These icons appear when you attach an optional GPS
module.
** Photos that were captured without inserting a memory
card cannot be transferred to a memory card or a computer.
• (Red): Empty (recharge
the battery)
• : Charging
Auto focus frame
Spot metering area
Camera shake
Manual focus scale
Level gauge (p. 43)
Histogram (p. 160)
Focus
Shutter speed
Aperture value
Exposure adjustment value
ISO sensitivity (p. 76)
2. Shooting options
IconDescription
Photo size
Drive mode
Flash (p. 98)
IconDescription
Flash intensity adjustment
Metering (p. 102)
AF mode (p. 81)
Focus area
Face detection
White Balance (p. 77)
White Balance micro adjustment
Optical Image Stabilization (OIS) (p. 91)
Z on
Z ratio
RAW le
Dynamic Range (p. 105)
3. Shooting options (Touch)
IconDescription
Change Smart mode***
AutoShare
Touch AF options
Shooting options
Smart panel
*** This icon appears only when you select Smart mode.
The icons displayed will change according to the
mode you select or the options you set.
42
My Camera > Display icons
Recording videos
1. Shooting information
IconDescription
Shooting mode
Current recording time/Available
recording time
100%
Battery percentage
• : Fully charged
• : Partially charged
• (Red): Empty (recharge the
battery)
• : Charging
2. Shooting options
1
IconDescription
2
Video size
AF mode (p. 81)
Metering (p. 102)
White Balance (p. 77)
White Balance micro adjustment
Optical Image Stabilization (OIS)
(p. 91)
Fader (p. 111)
Multi Motion (p. 110)
Voice recording o (p. 111)
The icons displayed will change according to the
mode you select or the options you set.
About the level gauge
The level gauge helps you align the camera with
the horizontal and vertical lines on the display.
If the level gauge is not level, calibrate the level
gauge using the Horizontal Calibration function.
(p. 164)
Vertical
Horizontal
▲ Level▲ Unlevel
You cannot use the level gauge when you shoot
in portrait orientation.
View previous le/Scan backward.
(Each time you touch the scan
/
backward icon, you change the scan
speed in this order: 2X, 4X, 8X.)
Pause or resume playback.
/
View next le/Scan forward. (Each
time you touch the scan forward
/
icon, you change the scan speed in
this order: 2X, 4X, 8X.)
Adjust the volume or mute the
sound.
44
My Camera > Display icons
Changing the information displayed
Press [D] repeatedly to change the display type.
ModeDisplay type
• Basic shooting information (Shooting mode, Shutter
speed, Aperture value, Exposure value, ISO sensitivity, etc.)
• Basic shooting information + Shooting option buttons
(MENU, Fn, AutoShare, Touch AF) + Level gauge
Shooting
• Basic shooting information + Shooting option buttons +
Current shooting options information (Photo size, Drive
mode, Flash, Metering, AF mode, etc.)
• Basic shooting information + Shooting option buttons +
Current shooting options information + Histogram + Date
and time
Viewing the notication panel
Touch at the top of the display to open the notication panel bar. Drag
the bar downward to open the notication panel. You can adjust the
display brightness or view battery life and data storage information. You
can also view photo size and quality, exposure value, and ISO sensitivity.
Drag the notication panel upward to close it.
Auto
Storage Space
10 Sheet
Notications
DrivePhoto SizeEV
Quick Panel
Battery level
Playback
• Basic information
• Display all information about the current le.
• Display all information about the current le including
RGB histogram.
45
My Camera
Lenses
You can purchase optional lenses made exclusively for your NX series
camera.
Learn about the functions of each lens and select one that suits your needs
and preferences.
Lens layout
SAMSUNG 18-55 mm F3.5-5.6 OIS III lens (example)
8
1
2
3
4
5
No.Description
Lens mount index
1
Zoom ring
2
Focus ring (p. 89)
3
Lens hood mount index
4
Lens
5
i-Function button (p. 60)
6
AF/MF switch (p. 81)
7
Lens contacts
8
When not using the lens, attach the lens cap and lens mount cover to protect
the lens from dust and scratches.
67
46
My Camera > Lenses
SAMSUNG 20-50 mm F3.5-5.6 ED II lens (example)
1
2
6
3
5
4
No.Description
Lens mount index
1
Zoom lock switch
2
Lens
3
Focus ring (p. 89)
4
Locking or unlocking the lens
7
To lock the lens, pull and hold the zoom lock switch away from the camera
body and rotate the zoom ring as shown in the illustration.
i-Function button (p. 60)
5
Zoom ring
6
Lens contacts
7
47
My Camera > Lenses
To unlock the lens, rotate the zoom ring as shown in the illustration until
you hear the click.
You cannot capture a photo when the lens is locked.
SAMSUNG 16 mm F2.4 lens (example)
1
2
3
4
No.Description
i-Function button (p. 60)
1
Lens mount index
2
Focus ring (p. 89)
3
Lens
4
Lens contacts
5
5
48
My Camera > Lenses
Lens markings
Find out what the numbers on the lens signify.
SAMSUNG 18-200 mm F3.5-6.3 ED OIS lens (example)
1
2345
No.Description
Aperture value
A range of supported aperture values. For example, 1:3.5–6.3 means
1
the maximum aperture value range from 3.5 to 6.3.
Focal length
The distance from the middle of the lens to its focal point (in
millimeters). This gure is expressed in a range: minimum focal length
2
to maximum focal length of the lens.
Longer focal lengths result in narrower angles of view and the subject
is magnied. Shorter focal lengths result in wider angles of view.
ED
ED stands for Extra-low Dispersion. Extra-low dispersion glass is
3
eective in minimizing chromatic aberration (a distortion that occurs
when a lens fails to focus all colors to the same convergence point).
OIS (Anti-Shake) (p. 91)
Optical Image Stabilization. Lenses with this feature can detect
4
camera shake and eectively cancel out the movement inside the
camera.
Ø
The lens diameter. When you attach a lter to the lens, make sure that
5
the diameters of the lens and the lter are the same.
49
My Camera
Accessories
You can use accessories such as external ash that can help you capture
better and more convenient photos.
For more information about optional accessories, refer to the manual for
each accessory.
•
The illustrations may dier from the actual items.
•
You can purchase Samsung-approved accessories at a retailer or a Samsung
service center. Samsung is not responsible for damage caused by using
another manufacturer's accessories.
External ash layout
SEF220A (example) (optional)
1
2
3
4
No.Description
Display icons
1
READY lamp/Test button
2
MODE button
3
Flash release button
4
Power button
5
7
8
6
5
9
Battery cover
6
Bulb
7
TELE/WIDE mode switch
8
Hot-shoe connection
9
50
My Camera > Accessories
Connecting the external ash
Remove the hot-shoe cover from the camera.
1
Mount the ash by sliding it into the hot-shoe.
2
•
To release the ash, gently pull the ash while you press the PUSH
button.
Press the power button on the ash.
3
•
You can capture a photo with a ash that is not fully charged, but it is
recommended to use a fully charged ash.
•
The available options may dier depending on the shooting mode.
•
There is an interval between two bursts of the ash. Do not move until the
ash res a second time.
•
For more details about optional ashes, refer to the user manual for the ash.
Use only Samsung-approved ashes. Using incompatible ashes may damage
your camera.
51
My Camera
Shooting modes
Two simple shooting modes—Smart Auto and Smart mode—help you
capture photos with numerous automatic settings. Additional modes
allow for greater customization of settings.
IconDescription
t
P
A
S
M
T
U
i
s
B
Smart Auto mode (p. 52)
Program mode (p. 54)
Aperture Priority mode (p. 56)
Shutter Priority mode (p. 57)
Manual mode (p. 58)
Custom mode 1 (p. 59)
Custom mode 2 (p. 59)
Lens Priority mode (p. 60)
Smart mode (p. 63)
Wi-Fi features (p. 129)
t Smart Auto mode
In Smart Auto mode, the camera recognizes surrounding conditions
and automatically adjusts factors that contribute to exposure, including
shutter speed, aperture value, metering, White Balance, and exposure
compensation. As the camera controls most of the functions, some
shooting functions are limited. This mode is useful for capturing quick
snapshots with the least amount of adjustment.
52
My Camera > Shooting modes
Rotate the mode dial to t.
1
Align your subject in the frame.
2
IconDescription
Landscapes with backlighting
Portraits with backlighting
Half-press [Shutter] to focus.
3
•
The camera selects a scene. An appropriate scene icon appears at
the screen.
A
Recognizable scenes
IconDescription
Landscapes
Scenes with bright white backgrounds
Landscapes at night
Portraits at night
Portraits
Close-up photos of objects
Close-up photos of text
Sunsets
Indoors, dark
Partially lit
Close-up with spot lighting
Portraits with spot lighting
Blue skies
Forested areas typically consist of green-colored subjects
Close-up photos of colorful subjects
Camera is stabilized on a tripod and the subject is not moving for a
certain period of time. (when shooting in the dark)
Actively moving subjects
Fireworks (when using a tripod)
Press [Shutter] to capture the photo.
4
53
My Camera > Shooting modes
•
The camera may detect dierent scenes, even the same subjects, depending
on external factors such as camera shake, lighting, or distance to the subject.
•
If the camera does not recognize an appropriate scene mode, it uses the
default settings for the Smart Auto mode.
•
Even if it detects a face, the camera may not select a portrait mode
depending on the subject's position or lighting.
•
Even if you use a tripod, the camera may not detect the tripod mode ( ) if
the subject is moving.
•
The camera consumes more battery power, because it changes settings often
to select appropriate scenes.
P Program mode
The camera automatically adjusts shutter speed and aperture value so that
an optimal exposure value can be achieved.
This mode is useful when you want to capture shots of constant exposure
while being able to adjust other settings.
Rotate the mode dial to P.
1
Set the desired options.
2
Half-press [Shutter] to focus, and then press [Shutter] to
3
capture the photo.
54
My Camera > Shooting modes
Program Shift
Program Shift function lets you adjust the shutter speed and aperture
value while the camera maintains the same exposure. When you scroll the
jog dial to the left or rotate the navigation button counter-clockwise, the
shutter speed decreases and the aperture value increases. When you scroll
the jog dial to the right or rotate the navigation button clockwise, the
shutter speed increases and the aperture value decreases.
Minimum shutter speed
Set the shutter speed not to be slower than the selected speed. However, if
an optimal exposure value cannot be achieved because the ISO sensitivity
reached the maximum ISO value that is set by Auto ISO Range, shutter
speed may be slower than the selected minimum shutter speed.
To set the minimum
shutter speed,
•
This feature is available only when the ISO sensitivity is set to Auto.
•
This feature is available only in Program or Aperture Priority mode.
In Shooting mode, press [m] ĺ b ĺ Minimum Shutter Speed
ĺ
an option.
55
My Camera > Shooting modes
A Aperture Priority mode
Rotate the mode dial to A.
1
In Aperture Priority mode, the camera automatically calculates shutter
speed according to the aperture value you choose.
You can adjust the depth of eld (DOF) by changing the aperture value.
This mode is useful for taking portraits, owers, or landscape shots.
Large Depth of Field Small Depth of Field
Scroll the jog dial or rotate the navigation button to adjust the
2
aperture value.
•
You can also adjust the aperture value by pressing [f], moving to
the aperture value, and then scrolling the jog dial or dragging the
screen.
Set the desired options.
3
Half-press [Shutter] to focus, and then press [Shutter] to
4
capture the photo.
•
In low-light settings, you may need to increase the ISO sensitivity to prevent
blurred photos.
•
To set the minimum shutter speed, in Shooting mode, press [m] ĺ b
ĺ
Minimum Shutter Speed ĺ an option.
56
My Camera > Shooting modes
S Shutter Priority mode
Rotate the mode dial to S.
1
In Shutter Priority mode, the camera automatically adjusts the aperture
value according to the shutter speed you choose. This mode is useful for
capturing photos of fast-moving subjects or for creating tracer eects in a
photo.
For example, set the shutter speed to over 1/500 s to freeze the subject. To
make the subject appear blurred set the shutter speed to below 1/30 s.
Slow shutter speedFast shutter speed
Scroll the jog dial or rotate the navigation button to adjust the
2
shutter speed.
•
You can also adjust the shutter speed by pressing [f], moving to
the shutter speed, and then scrolling the jog dial or dragging the
screen.
Set the desired options.
3
Half-press [Shutter] to focus, and then press [Shutter] to
4
capture the photo.
In order to compensate for the reduced amount of light allowed by fast shutter
speeds, open the aperture and let in more light. If your photos are still too dark,
increase the ISO value.
57
My Camera > Shooting modes
M Manual mode
Manual mode lets you adjust the shutter speed and aperture value
manually. In this mode, you can fully control the exposure of your photos.
This mode is useful in controlled shooting environments, such as a studio,
or when it is necessary to ne-tune camera settings. The Manual mode is
also recommended for shooting night scenes or reworks.
Rotate the mode dial to M.
1
Scroll the jog dial to adjust the shutter speed.
2
Rotate the navigation button to adjust the aperture value.
3
•
You can also adjust the shutter speed or the aperture value by
pressing [f], moving to the shutter speed or the aperture value,
and then scrolling the jog dial or dragging the screen.
Set the desired options.
4
Half-press [Shutter] to focus, and then press [Shutter] to
5
capture the photo.
Using Framing Mode
When you adjust the aperture value or shutter speed, the exposure
changes according to the settings, so the display may darken. With this
function on, the brightness of the display is constant regardless of the
settings, so you can better frame your shot.
To use Framing
Mode,
In Shooting mode, press [m] ĺ b ĺ Framing Mode
ĺ
an option.
58
My Camera > Shooting modes
Using the Bulb function
Use the Bulb function to shoot night scenes or the night sky. While you are
pressing [Shutter], the shutter is left open so you can create moving light
eects.
To use a bulb,
•
•
•
•
•
•
If you set a high ISO value or open the shutter for a long time, image noise
may increase.
Drive options, ash, and One touch shot cannot be used with the Bulb
function.
The Bulb function is available only in Manual mode.
Use a tripod and shutter release to prevent your camera from shaking.
The longer you open the shutter, the longer it takes to save a photo. Do not
turn the camera o while the camera saves a photo.
If you use this function for a long time, use a fully charged battery.
Completely scroll the jog dial to the left to Bulb ĺ Press and
hold [Shutter] for the desired time.
TU Custom mode
Custom mode lets you create your own shooting modes by adjusting
options and saving them.
Saving custom modes
Rotate the mode dial to P, A, S, M, T, or U.
1
Set shooting options.
2
Press [m], and then select d ĺ Manage Custom Mode
3
ĺ
Save.
•
You can also save a custom mode by pressing [f], and then
touching
Verify the shooting options, and then select Save.
4
Use the on-screen keyboard to enter a name for the mode.
5
(p. 134)
.
Press [o] to save a mode.
6
You can save up to 10 custom modes.
59
My Camera > Shooting modes
Selecting custom modes
Rotate the mode dial to T or U.
1
Press [m], and then select d ĺ Manage Custom Mode
2
ĺ
Open ĺ a mode.
•
If there is no custom mode saved, you can select a shooting mode,
set shooting options, and save new custom modes.
Verify the shooting options, and then select OK.
3
Deleting custom modes
Rotate the mode dial to P, A, S, M, T, or U.
1
Press [m], and then select d ĺ Manage Custom Mode
2
ĺ
Delete.
Select a mode to delete, and then press [n].
3
i Lens Priority mode
Using the iFn standard function
When you use [i-Function] on an i-Function lens, you can manually select
and adjust shutter speed, aperture value, exposure value, ISO sensitivity,
and White Balance on the lens. You can also adjust the depth of eld or
contrast of the photo or use the Z function.
Select an option.
Adjust an option value.
Rotate the mode dial to P, A, S, M, or i.
1
Press [m], and then select d ĺ iFn Setting ĺ iFn Mode
2
ĺ
iFn Stadard.
60
My Camera > Shooting modes
Press [m] to return to Shooting mode.
3
Press [i-Function] on the lens to select a setting.
4
•
To display setting items, select [m] ĺ d ĺ iFn Setting ĺ iFn
ĺ
Stadard
•
You can also press [i-Function], and then press [D/I] or drag
an item.
the screen to select a setting.
OptionDescription
Aperture value
Shutter speed
ISO
EV
Adjust the aperture value.
Adjust the shutter speed.
Adjust the ISO sensitivity.
Adjust the exposure value.
OptionDescription
E
G
Adjust the focus ring to select an option.
5
•
You can also scroll the jog dial or rotate the navigation button or
Adjust the depth of eld to blur or sharpen the
background.
Adjust the contrast to increase or decrease the
shading dierences in the photo.
drag the screen to select an option.
Half-press [Shutter] to focus, and then press [Shutter] to
6
capture the photo.
White Balance
Z
Select a White Balance option.
Zoom in on a subject with less degradation of
photo quality than the Digital zoom. However, the
photo resolution may change compared to when
you zoom in by rotating the zoom ring.
61
My Camera > Shooting modes
Available options
Shooting modePASMi3D
Aperture
Shutter speed
EV
ISO
White Balance
E
Z
G
-O-O- -
--OO--
OOO - - O
OOOO - -
OOOO - O
- - - -O-
OOOOO -
- - - -O-
Photo resolution depending on Z ratio
3:216:91:1
x1.2
x1.4
x1.7
4560X3040 (13.9M)4480X2520 (11.3M)2992X2992 (9M)
3888X2592 (10.1M)3840X2160 (8.3M)2544X2544 (6.5M)
3120X2080 (6.5M)3072X1728 (5.3M)2160X2160 (4.7M)
•
This function is not available when you attach a 3D lens and set 3D Auto
Mode in 3D mode.
•
As you adjust the E option closer to , the aperture value increases
and the shutter speed reduces. In dark conditions, photos may be blurry.
•
As you adjust the G option closer to -4, the shading dierences in
the photo increase.
•
Z is not available when you set the shooting method to Burst.
•
Z is not available when you capture photos in the RAW le format.
•
Z is deactivated when you record videos by pressing the video
recording button.
x2
These gures are based on the maximum resolution at each image ratio.
2736X1824 (5.0M)2688X1512 (4.1M)1728X1728 (3.0M)
62
My Camera > Shooting modes
Using the iFn plus function
On an i-Function lens, press and hold [i-Function], and then press [N],
[W], or [a] on the camera. You can start assigned functions or open
the settings menu with i-Function.
E.g. Assigning the photo quality function to the Metering
button
Rotate the mode dial to P, A, S, or M.
1
Select [m] ĺ d ĺ iFn Setting ĺ iFn Plus ĺ Metering
2
ĺ
Quality.
Press [m].
3
Select iFn Mode ĺ iFn Plus.
4
Press [m] to return to Shooting mode.
5
Press [i-Function] on an i-Function lens and [N] on the
6
camera together.
s Smart mode
In Smart mode, you can capture photos with options that are preset for a
specic scene.
Rotate the mode dial to s.
1
Select a scene.
2
Switch to the grid view.
Drag to navigate options.
Switch to the list view.
Select a photo quality option.
7
Half-press [Shutter] to focus, and then press [Shutter] to
8
capture the photo.
63
My Camera > Shooting modes
OptionDescription
Beauty Face
Best Face
Landscape
Macro
Action Freeze
Rich Tones
Panorama
Waterfall
Multi Exposure
Creative Shot
Smart Jump Shot
Silhouette
Capture a portrait with options to hide facial
imperfections.
Capture multiple photos and replace faces to create
the best possible image.
Capture still-life scenes and landscapes.
Capture small or close-up subjects.
Capture subjects moving at high speed.
Capture a photo with vibrant colors.
Capture a wide panoramic scene in a single photo.
Capture scenes with waterfalls.
Capture multiple photos and overlap them to create
one photo.
Capture photos with eects applied automatically.
Set an area to automatically capture a jumping subject
when movement is detected.
Capture subjects as dark shapes against a light
background.
OptionDescription
Sunset
Night
Fireworks
Light Trace
Half-press [Shutter] to focus, and then press [Shutter] to
3
Capture scenes at sunset, with natural-looking reds
and yellows.
Capture multiple photos in low light conditions
without a ash. The camera combines them to create a
single image that is brighter and has less blurring.
Capture scenes with reworks.
Capture scenes with the light trailing in low-light
conditions.
capture.
64
My Camera > Shooting modes
Using the Best Face mode
In Best Face mode, you can capture multiple photos and replace faces to
create the best possible image. Use this mode to select the best image for
each individual when capturing group photos.
Rotate the mode dial to s, and then select Best Face.
1
Align your subject in the frame, and then half-press [Shutter]
2
to focus.
Press [Shutter] to capture the photo.
3
•
The camera captures 5 photos consecutively.
•
The rst photo is set as the background image.
•
The camera automatically detects faces after shooting.
Touch a face to replace.
4
Back
Save
Touch the best image from the 5 faces that were captured.
5
•
Repeat steps 4 and 5 to replace the rest faces of the photo.
•
The icon will appear on the image that the camera recommends.
Save
Press [o] to save the photo.
6
•
Use a tripod to prevent your camera from shaking.
•
The resolution is set to 5.9M or smaller.
Back
65
My Camera > Shooting modes
Capturing panoramic photos
Capture a 2D or 3D panoramic photo. Captured 3D panoramic photos can
be viewed only on a 3D TV or 3D monitor.
Rotate the mode dial to s, and then select Panorama.
1
Press [m] ĺ b ĺ Panorama ĺ Live Panorama or 3D.
2
Press [m] to return to Shooting mode.
3
Press and hold [Shutter] to start shooting.
4
With [Shutter] pressed, slowly move the camera in the
5
direction you selected.
•
In 3D Panorama mode, you can capture a scene only in horizontal
directions.
•
An arrow toward the direction of motion is displayed, and the entire
shooting image is displayed in the preview box.
•
When the scenes are aligned, the camera captures the next photo
automatically.
When you are nished, release [Shutter].
6
•
The camera will automatically save the shots into one photo.
•
If you release [Shutter] while shooting, the panoramic shooting
stops and photos that have been captured are saved.
66
My Camera > Shooting modes
•
The resolution varies depending on the panoramic photo you captured.
•
In Panorama mode, some shooting options are not available.
•
The camera may stop shooting due to the shooting composition or the
subject's movement.
•
In Panorama mode, your camera may not capture the entire last scene if you
stop moving the camera to improve the photo quality. To capture the entire
scene, move your camera slightly beyond the point where you want the
scene to end.
•
In 3D Panorama mode, your camera may not capture the very beginning or
end of a scene due to the nature of the 3D eect. To capture the entire scene,
move slightly beyond the beginning and end points you want to capture.
•
Photos captured with the 3D function are saved in JPEG (2D) and MPO (3D)
formats. On your camera's display, you can view only JPEG les.
•
To view 3D les, connect your camera to a 3D TV or 3D monitor with an
optional HDMI cable. While viewing, wear proper 3D glasses.
•
Capturing photos in 3D Panorama mode may result in a less pronounced 3D
eect than those captured with a 3D lens. To increase the 3D eect, attach
the optional 3D lens and use 3D mode. (p. 70)
•
For best results when capturing panoramic photos, avoid the following:
-
moving the camera too quickly or too slowly
-
moving the camera too little to capture the next image
-
moving the camera at irregular speeds
-
shaking the camera
-
shooting in dark places
-
capturing moving subjects nearby
-
shooting conditions where the brightness or color of light is changing
•
Photos taken are automatically saved, and shooting is stopped under the
following conditions:
-
if you change the shooting direction while shooting
-
if you move the camera too rapidly
-
if you do not move the camera
67
My Camera > Shooting modes
Using the Smart Jump Shot mode
In Smart Jump Shot mode, you can set an area to capture a jumping
subject. The camera will automatically capture a photo when movement is
detected.
Rotate the mode dial to s, and then select Smart Jump
1
Shot.
Drag the box on the screen to the desired location.
2
Drag the corners of the box to adjust the size of the box.
3
Press [Shutter] or [o] to capture the photo.
4
•
The AF-assist light/Timer lamp will blink.
•
When a subject is detected within the box on the screen, the
camera will capture 5 photos consecutively.
Touch the best image from the 5 photos to select it.
5
Press [o] to save the photo.
6
In dark environments the camera may not detect movement. Where possible
take photos in bright shooting conditions.
68
My Camera > Shooting modes
Recording a video
In Shooting mode, you can record Full HD videos (1920X1080) by pressing
(Video recording). The camera lets you record a video up to 29 minutes
and 59 seconds in length at 60, 30, 24, or 15 fps, and saves the les in
MP4 (H.264) format. 60 fps is available only with 1920X1080 and 1280X720
and 24 fps is available only with 1920X810. 15 fps is available only
with some Smart Filter options. The sound is recorded via the camera's
microphone.
You can set the exposure by adjusting the aperture value and shutter
speed for the mode you selected. When you use a lens that does not have
an AF/MF switch while recording a video, press [F] to deactivate or
activate the AF function. When you use the lens that has an AF/MF switch,
the AF function works according to the switch’s setting.
Select Fader to fade in or out a scene. You can also select Voice, Wind Cut,
or other options to set recording options. (p. 111)
Rotate the mode dial to t, P, A, S, M, T, U, i, or
1
s.
•
This feature may not work in some modes.
Set the desired options.
2
Press (Video recording) to start recording.
3
Press (Video recording) again to stop.
4
•
H.264 (MPEG-4 part10/AVC) is the latest video coding format established
in 2003 collaboratively by ISO-IEC and ITU-T. Since this format uses a high
compression rate, more data can be saved in less memory space.
•
If you have the image stabilizer option on when shooting a movie, the
camera may record the image stabilizer sound.
•
The zoom sound or other lens sounds may be recorded if you adjust the lens
while recording a video.
•
When using an optional video lens, the autofocus noise is not recorded.
•
If you remove the camera lens while recording a movie, the recording will be
interrupted. Do not change the lens while recording.
•
If you attach an external microphone while recording a movie, sound will not
be recorded through the external microphone. (The previous settings are
maintained.) If you remove the external microphone while recording a movie,
sound will not be recorded. Turn o the camera before attaching or removing
the external microphone.
69
My Camera > Shooting modes
•
If you change the shooting angle of the camera suddenly while shooting a
movie, the camera may not be able to record images accurately. Use a tripod
to minimize camera shake.
•
The camera supports only the Multi AF function when recording a video. You
cannot use any other focus area setting functions, such as Face Detection AF.
•
When the size of a movie le exceeds 4 GB, the camera automatically stops
recording even if the maximum recording time (29 minutes and 59 seconds)
has not been reached.
•
If you use a slow writing memory card, the recording of your movie can
be interrupted because the card cannot process data at the rate the video
is being shot. If this occurs, replace the card with a faster memory card or
reduce the video size (for example, from 1280X720 to 640X480).
•
When formatting a memory card, always format using the camera. If you
format on another camera or a PC, you can lose les on the card or cause a
change in the capacity of the card.
•
When you press the video recording button, Z turns o.
•
While recording a video in the same ISO sensitivity, the screen may be darker
than taking a photo. Adjust the ISO sensitivity.
•
When you record a video in P, A, or S mode, ISO is automatically set to Auto.
3D mode
You can capture 3D photos or videos with an optional 3D lens.
SAMSUNG 45 mm F1.8 [T6] 2D/3D lens (example)
Set the 2D/3D switch on the lens to 3D, and then capture a photo or video
1.5–5 m away from the subject.
70
My Camera > Shooting modes
•
3D mode is always on, regardless of the mode dial of the camera, except
B.
•
To use auto 3D options that enable the camera to set shooting options
automatically depending on shooting conditions in 3D mode, press
[m]
•
To change the 3D recording option, press [m] ĺ g ĺ
3D REC Mode
IconDescription
ĺ
b ĺ 3D Auto Mode ĺ On.
ĺ
a desired option.
* Default
Side by Side*: Displays two images next to each other.
Frame Packing: Displays the images for the left and right eye
alternately in frames.
•
Available shooting options dier compared to other shooting modes.
•
You can select either 4.1M (2688X1512) or 2.1M (1920X1080) photo size.
•
The video resolution is set to 1920X1080.
•
Videos recorded in 3D may be dark or playback may be jittery.
•
Shooting in low temperatures may result in color distortion in images and
may consume more battery power.
•
You may not be able to shoot properly in conditions below 8.5 LV/900 lux. For
best results, capture photos in places with sucient light.
•
When you photograph objects that contain polarizing material, such as a
display, sunglasses, or a polarizing lter, or use the polarizing material with
your lens, the images may appear dark or the 3D eect may not be applied
properly.
•
Use a tripod to prevent your camera from shaking.
•
If you rotate or tilt the camera vertically while shooting, the 3D eect may not
be applied properly. Capture images with the camera in the normal position.
•
If you shoot in uorescent lighting or capture images displayed by projectors
or TVs, the images may appear black due to the icker eect.
•
In 3D mode, the Enlarge x8 option of MF Assist may not be available.
•
The camera's display shows 3D videos only in 2D.
•
Photos captured with the 3D function are saved in JPEG (2D) and MPO (3D)
formats. On your camera's display, you can view only JPEG les.
•
To view 3D les, connect your camera to a 3D TV or 3D monitor with an
optional HDMI cable. While viewing, wear proper 3D glasses.
•
You cannot use the ash in 3D mode.
71
My Camera > Shooting modes
Available functions by shooting mode
For details about shooting functions, see Chapter 2.
Press a shortcut for each function.
Learn about the functions you can set in Shooting mode.
You can enjoy more customized photos and videos by using the shooting functions.
Shooting Functions
s
Shooting Function
Shooting Functions
Size and Resolution
Photo size
As you increase the resolution, your photo or video will include more
pixels, so it can be printed on larger paper or displayed on a larger screen.
When you use a high resolution, the le size will also increase. Select a low
resolution for photos that will be displayed in a digital picture frame or
uploaded to the web.
To set the size,
In Shooting mode, press [m] ĺ b ĺ Photo Size ĺ
an option.
IconSizeRecommended for
(3:2) 5472x3648*Printing on A0 paper.
(3:2) 3888x2592Printing on A2 paper.
(3:2) 2976x1984Printing on A4 paper.
(3:2) 1728x1152Printing on A5 paper.
(16:9) 5472x3080
(16:9) 3712x2088
(16:9) 2944x1656
(16:9) 1920x1080
(1:1) 3648x3648Printing a square photo on A1 paper.
(1:1) 2640x2640Printing a square photo on A3 paper.
(1:1) 2000x2000Printing a square photo on A4 paper.
(1:1) 1024x1024Attaching to an email.
Printing on A1 paper or viewing on an
HDTV.
Printing on A3 paper or viewing on an
HDTV.
Printing on A4 paper or viewing on an
HDTV.
Printing on A5 paper or viewing on an
HDTV.
* Default
Available options may dier depending on shooting conditions.
7474
Shooting Functions > Size and Resolution
Quality
The camera saves photos in either the JPEG or RAW format.
Photos captured by a camera are often transformed to the JPEG format
and stored in the memory according to the settings of the camera at the
time of shooting. RAW les are not transformed to the JPEG format and are
stored in the memory without any changes.
RAW les have the le extension "SRW". To adjust and calibrate exposures,
White Balances, tones, contrasts, and colors of the RAW les, or to convert
them into JPEG or TIFF format, use the Adobe Photoshop Lightroom
program found on the supplied DVD-ROM.
Ensure you have enough space on the memory card to save photos in the
RAW format.
To set the quality,
IconFormatDescription
JPEG
In Shooting mode, press [m] ĺ b ĺ Quality ĺ
an option.
Super Fine*:
• Compressed for the best quality.
• Recommended for printing in large size.
* Default
IconFormatDescription
Normal:
JPEG
RAW
RAW+JPEG
RAW+JPEG
RAW+JPEG
Available options may dier depending on shooting conditions.
• Compressed for normal quality.
• Recommended for printing in small size or
uploading to the web.
RAW:
• Save a photo without data loss.
• Recommended for editing after shooting.
RAW + S.Fine: Save a photo in both the JPEG
(S.Fine quality) and RAW format.
RAW + Fine: Save a photo in both the JPEG (Fine
quality) and RAW format.
RAW + Normal: Save a photo in both the JPEG
(Normal quality) and RAW format.
* Default
JPEG
Fine:
• Compressed for better quality.
• Recommended for printing in normal size.
75
Shooting Functions
s
Shooting Function
Shooting Functions
ISO sensitivity
The ISO sensitivity value represents the sensitivity of camera to light.
The larger the ISO value, the more sensitive the camera is to light.
Consequently, by selecting a higher ISO sensitivity value, you can capture
photos in dim or dark places at faster shutter speeds. However, this may
increase electronic noise and result in a grainy photo.
To set ISO sensitivity,
In Shooting mode, press [I] ĺ an option.
Examples
•
•
•
•
ISO 100ISO 400
ISO 800ISO 3200
You can also set the option by pressing [m] ĺ b ĺ ISO ĺ an option
in Shooting mode.
Increase the ISO value in places where ash use is prohibited. You can capture
a clear photo by setting a high ISO value without having to secure more light.
Use the Noise Reduction function in order to reduce the visual noise that can
appear on photos of a high ISO value. (p. 156)
Available options may dier depending on the shooting conditions.
7676
Shooting Functions
s
Shooting Function
Shooting Functions
White Balance
White Balance represents the light source that inuences on the color of a
photo.
The color of a photo depends on the type and quality of the light source.
If you want the color of your photo to be realistic, select an appropriate
lighting condition to calibrate the White Balance, such as Auto WB,
Daylight, Cloudy, Tungsten, or adjust color temperature manually.
You can also adjust color for the preset light sources so that the colors of
the photo match the actual scene under mixed lighting conditions.
To set the White
Balance,
IconDescription
Auto WB*: Use automatic settings depending on the lighting
conditions.
Daylight: Select when taking outdoor photos on a sunny day. This
option results in photos closest to the natural colors of the scene.
Cloudy: Select when taking outdoor photos on a cloudy day or in
shadows. Photos captured on cloudy days tend to be more bluish
than on sunny days. This option osets that eect.
In Shooting mode, press [C] ĺ an option.
* Default
IconDescription
Fluorescent White: Select when shooting under a daylight
uorescent lamp. Especially for white uorescent light with a color
temperature of about 4,200K.
Fluorescent NW: Select when shooting under a daylight
uorescent lamp. Especially for white uorescent light of very
N
white hues with a temperature of about 5,000K.
Fluorescent Daylight: Select when shooting under a daylight
D
uorescent lamp. Especially for white uorescent light of slightly
bluish hue with a temperature of about 6,500K.
Tungsten: Select when taking indoor photos under incandescent
bulbs or halogen lamps. Incandescent tungsten bulbs tend to have
a reddish hue. This option osets that eect.
Flash WB: Select when using a ash.
Custom Set: Use your pre-dened settings. You can manually set
the White Balance by pressing [D], and then shooting a white
sheet of paper. Fill the spot metering circle with the paper and set
the White Balance.
* Default
7777
Shooting Functions > White Balance
IconDescription
Color Temperature: Manually adjust the color temperature of
the light source. Color temperature is a measurement in degrees
Kelvin that indicates the specic type of light source. As the color
temperature increases, the color distribution becomes cooler.
Alternatively, as the color temperature decreases, the color
distribution becomes warmer. Press [D], and then adjust the
color temperature.
Clear sky
Fluorescent H
Cloudy
Daylight
Fluorescent L
Halogen lamp
Tungsten
Candle light
* Default
Customizing preset White Balance options
You can also customize preset White Balance options.
To customize
preset options,
White Balance : Daylight
You can also touch an area on the screen.
In Shooting mode, press [C] ĺ an option ĺ [D] ĺ
scroll the jog dial or rotate the navigation button or press
[D/I/C/F].
BackSetReset
•
You can also set the option by pressing [m] ĺ b ĺ White Balance
ĺ
an option in Shooting mode.
•
Available options may dier depending on shooting conditions.
78
Shooting Functions > White Balance
Examples
Auto WBDaylight
Fluorescent DaylightTungsten
79
Shooting Functions
s
Shooting Function
Shooting Functions
Picture Wizard (photo styles)
Picture Wizard lets you apply dierent photo styles to your photo to create
various looks and emotional moods. You can also create and save your
own photo styles by adjusting color, saturation, sharpness, and contrast for
each style.
There is no rule for which style is suitable in which conditions. Experiment
with dierent styles and nd your own settings.
To set a photo style,
Examples
In Shooting mode, press [m] ĺ b ĺ Picture Wizard
ĺ
an option.
CoolCalmClassic
•
You can also adjust the value of the preset style settings. Select a Picture
Wizard option, press [D], and then adjust color, saturation, sharpness, or
contrast.
•
To customize your own picture wizard, select , , or , and then adjust
the color, saturation, sharpness, and contrast.
•
Picture Wizard options cannot be set with Smart Filter options at the same
time.
Standard VividPortrait
LandscapeForestRetro
8080
Shooting Functions
s
Shooting Function
Shooting Functions
AF mode
Learn how to adjust the camera’s focus according to the subjects.
You can select a focusing mode appropriate to the subject among Single
Auto Focus, Continuous Auto Focus, and Manual Focus. The AF function is
activated when you press [Shutter] halfway. In the MF mode, you have to
rotate the focus ring on the lens to focus manually.
In most cases, you can have a focus by selecting Single AF. Fast moving
subjects or subjects of a color similar to the background are dicult to
focus. Select an appropriate focusing mode for such instances.
If your lens has an AF/MF switch, you must set the switch according to
the selected mode. Set the switch to AF when you select Single AF or
Continuous AF. Set the switch to MF when you select Manual Focus.
To set the auto
focus mode,
•
You can also set the option by pressing [m] ĺ b ĺ AF Mode ĺ
an option in Shooting mode.
•
The available options may dier depending on the lens in use.
In Shooting mode, press [F] ĺ an option.
When your lens has no AF/MF switch, press [F] to select a desired AF
mode.
8181
Shooting Functions > AF mode
Single AF
Single AF is appropriate for shooting a still subject. When you press
[Shutter] halfway, the focus xes in the focus area. The area turns green
when the focus is achieved.
Continuous AF
While you are pressing [Shutter] halfway, the camera continues to
automatic focusing. Once the focus area is xed on the subject, the subject
is always in focus even when moving. This mode is recommended for
shooting a person on a bicycle, a running dog, or a car racing scene.
82
Shooting Functions > AF mode
Manual focus
You can manually focus on a subject by rotating the focus ring on the
lens. The MF Assist function lets you easily achieve a focus. While you are
rotating the focus ring, the focus area is magnied. When you use the
Focus Peaking function, the color you selected appears on the focused
subject. This mode is recommended for shooting an object similar in color
to the background, a night scene, or reworks.
If you use this function, you cannot set Touch AF, AF Area, and Link AE to AF Point options.
83
Shooting Functions
s
Shooting Function
Shooting Functions
AF area
The AF area function changes the positions of the focus area.
Generally, cameras focus on the nearest subject. When there are a lot of
subjects, however, unwanted subjects can be in focus. In order to prevent
unwanted subjects from being in focus, change the focus area so that
a desired subject is in focus. You can get a clearer and sharper photo by
selecting an appropriate focus area.
To set the auto
focus area,
•
Available options may dier depending on shooting conditions.
•
When the AF/MF switch is set to MF, you cannot change the AF area from the
shooting menu.
•
When you use the Face Detection AF option, the camera focuses on the area
with the white frame automatically.
•
Depending on the Picture Wizard options, Face Detection may not be
eective.
•
When you set manual focus, Face Detection may not be available.
•
Face Detection may not be eective when:
-
-
-
-
-
-
the subject is far from the camera
it is too bright or too dark
the subject is not facing the camera
the subject is wearing sunglasses or a mask
the subject’s facial expression changes drastically
the subject is backlit or the lighting conditions are unstable
In Shooting mode, press [m] ĺb ĺ AF Area ĺ
an option.
Selection AF
You can set the focus on an area you want. Apply an out-of-focus eect to
make the subject more distinguishable.
The focus on the photo below was repositioned and resized so that it ts
the subject’s face.
To resize or move the focus area, in Shooting mode, press [o]. Use the
navigation button to move the focus area. Scroll the jog dial to resize the focus
area.
8484
Shooting Functions > AF area
Multi AF
The camera displays a green rectangle in places where focus is set
correctly. The photo is divided into two or more areas, and the camera
obtains focus points of each area. It is recommended for scenery photos.
When you press [Shutter] halfway, the camera displays the focus areas as
shown in the photo below.
Face Detection AF
The camera focuses on human faces preferentially. Faces of up to
10 people can be detected. This setting is recommended for shooting a
group of people.
When you press [Shutter] halfway, the camera focuses on faces as shown
in the photo below. In cases of shooting a group of people, the camera
displays the focus on the nearest person’s face in white and the rest of the
people’s faces in gray.
85
Shooting Functions > AF area
Self-Portrait AF
It can be dicult to check whether your face is in focus when you are
taking a self-portrait. When this function is on, the beep from the camera
gets faster when your face is located at the center of the composition.
86
Shooting Functions
s
Shooting Function
Shooting Functions
Touch AF
Select or focus on a focal area that you touch on the screen. Additionally,
focus on the subject and capture a photo by touching on the screen.
To set Touch AF,
Available options may dier depending on the shooting conditions.
In Shooting mode, press [m] ĺb ĺTouch AF ĺ
an option.
Touch AF
Touch AF allows you to select and focus on the focus area that you touch
on the screen.
Tracking AF
Tracking AF allows you to track and automatically focus on your subject,
even when the subject is moving or when you change the shooting
composition.
White frame: Your camera is
tracking the subject.
Green frame: Your subject is
in focus when you half-press
[Shutter].
AF Point
The focal area will correspond to the area you touch on the screen and the
focus will not be achieved.
Red frame: Your camera failed to
focus.
8787
Shooting Functions > Touch AF
•
If you do not select a focus area, the Auto Focus function does not work.
•
Tracking a subject may fail when:
-
the subject is too small
-
the subject moves irregularly
-
the subject is backlit or you are shooting in a dark place
-
colors or patterns on the subject and the background are the same
-
the subject includes horizontal patterns, such as blinds
-
the camera shakes excessively
•
When tracking fails, the feature will be reset.
•
If the camera fails to track the subject, the focus area will be reset.
•
If the camera fails to focus, the focus frame will change to red and the focus
will be reset.
One touch shot
You can capture a photo with the touch of your nger. As you touch on a
subject, the camera focuses on the subject automatically and captures a
photo.
88
Shooting Functions
S
s
hooting Function
Shooting Functions
Focus assist
In the manual focus mode, you have to rotate the focus ring on the lens to
focus. When you use the MF Assist function or the Focus Peaking function,
you can achieve a clearer focus. This function is only available on a lens
that supports manual focus.
You can also use the Direct Manual Focus (DMF) function to adjust the
focus manually. After focusing with the Auto Focus function, adjust the
focus by rotating the focus ring.
MF Assist
In the manual focus mode, you can enlarge the scene and easily adjust the
focus while rotating the focus ring.
To set the manual
focus assist,
In Shooting mode, press [m] ĺ b ĺ MF Assist ĺ
an option.
OptionDescription
O
Enlarge x5*
Enlarge x8
Do not use the MF Assist function.
The focus area is magnied by 5 times when you rotate the
focus ring.
The focus area is magnied by 8 times when you rotate the
focus ring.
* Default
8989
Shooting Functions > Focus assist
Focus Peaking
In the manual focus mode, the color you selected appears on the focused
subject to help you focus while rotating the focus ring.
To set Focus
Peaking options,
OptionDescription
Level
Color
Set a sensitivity for detecting the focused subject.
(O, High, Normal*, Low)
Set a color to appear on the focused subject.
(White*, Red, Green)
In Shooting mode, press [m] ĺ b ĺ Focus Peaking ĺ
an option.
* Default
DMF (Direct Manual Focus)
You can adjust the focus manually by rotating the focus ring after
achieving the focus by half-pressing [Shutter]. This feature may not be
available with some lenses.
To set the DMF
function,
Setting DMF responsiveness
Set the focus ring's response when you use the DMF function. If you select
High, slight rotations of the focus ring are made to adjust the focus. If you
select Low, longer rotations of the focus ring are made to adjust the focus.
This feature may not be available with some lenses.
To set DMF
Resposiveness
options,
In Shooting mode, press [m] ĺ d ĺ DMF ĺ an option.
In Shooting mode, press [m] ĺ d ĺ DMF Responsiveness
ĺ
High, Medium, or Low.
90
Shooting Functions
s
Shooting Function
Shooting Functions
Optical Image Stabilization (OIS)
Use the Optical Image Stabilization (OIS) function to minimize camera
shake. OIS may not be available with some lenses.
Camera shake tends to occur in dark places or when shooting indoors.
In such cases, the camera uses slower shutter speeds in order to increase
the amount of light taken in, which can result in a blurry photo. You can
prevent this situation by using the OIS function.
If your lens has an OIS switch, you have set the switch to ON to use the OIS
function.
Without OIS correctionWith OIS correction
To set OIS options,
IconDescription
Mode 1*: The OIS function is applied only when you press
[Shutter] in full or half.
Mode 2: The OIS function is on.
O: The OIS function is o. (This option may not be available with
some lenses.)
In Shooting mode, press [m] ĺb ĺ OIS (Anti-Shake)
ĺ
an option.
* Default
•
OIS may not function properly when:
-
you move your camera to follow a moving subject
-
there is too much camera shake
-
the shutter speed is slow (for example, when you select Night in s mode)
-
the battery is low
-
you capture a close-up shot
•
If you use the OIS function with a tripod, your images may be blurred by
the vibration of the OIS sensor. Deactivate the OIS function when you use a
tripod.
•
If the camera is hit or dropped, the display will be blurry. If this occurs, turn o
the camera, and then turn it on again.
•
Use the OIS function only when needed because the function consumes
more battery power.
•
To set an OIS option on the menu, set the OIS switch on your lens to ON.
•
This option may not be available with some lenses.
•
O may not be available with some lenses.
9191
Shooting Functions
s
Shooting Function
Shooting Functions
Drive (shooting method)
You can set the shooting method, such as Continuous, Burst, Timer, or
Bracketing.
Select Single to capture one photo at a time. Select Continuous or Burst
to shoot fast moving subjects. Select AE Bracket, WB Bracket, P Wiz Bracket, or Depth Bracket to adjust exposure, White Balance, apply
picture Wizard eects, or capture photos with dierent depths of eld. You
can also select Timer to capture a photo automatically after a specied
time.
IconDescription
H
Single (p. 93)
Available options may dier depending on shooting conditions.
J
K
L
Continuous (p. 93)
Timer (p. 94)
Bracketing (p. 95)
Do not rotate the drive dial beyond the permitted limits. Doing so may damage
the camera.
9292
Shooting Functions > Drive (shooting method)
Single
Capture one photo whenever you press [Shutter]. Recommended for
general conditions.
To set the shooting
method,
Rotate the drive dial to H.
Continuous
Continuously capture photos while you are pressing [Shutter]. You can
capture up to 4 photos (Continuous Normal) or 9 photos (Continuous High) per second.
To set the shooting
method,
Rotate the drive dial to J, press [m] ĺ b ĺ Drive
Settings
Normal.
ĺ
Continuous ĺ Continuous High or Continuous
If you select Continuous High, the noise reduction function is not available.
93
Shooting Functions > Drive (shooting method)
Burst
Consecutively capture up to 10 shots per second (3 seconds), 15 shots per
second (2 seconds), or 30 shots per second (1 second) when you press
[Shutter] once. It is recommended for shooting the rapid motion of fast
moving subjects such as racing cars.
To set the shooting
method,
•
The photo size is set to 5M.
•
It may take longer to save a photo.
•
You cannot use the ash with this option.
•
Shutter speed must be faster than 1/30 second.
•
Photos captured with this option may be slightly enlarged when saving.
•
You cannot set an ISO option higher than ISO 3200.
•
This option cannot be used with the RAW le format and is not available
when the photo quality is set to RAW.
Rotate the drive dial to J, press [m] ĺ b ĺ Drive Settings
ĺ
Continuous ĺ Burst ĺ an option.
Timer
Capture a photo after a specied time. You can also set the shooting
interval, number of shots, and shooting time.
To set the shooting
method,
To set the timer details, set the drive dial to K, press [m] ĺ b ĺ Drive
Settings
Rotate the drive dial to K.
ĺ
Timer ĺ an option.
94
Shooting Functions > Drive (shooting method)
Auto Exposure Bracketing (AE Bracket)
When you press [Shutter], the camera captures 3 consecutive photos: the
original, one a step darker, and one a step lighter. Use a tripod to prevent
blurry photos as the camera captures three photos continuously. You can
adjust the settings in Bracket Set menu.
To set the shooting
method,
Exposure -2
Rotate the drive dial to L, press [m] ĺ b ĺ Drive Settings
ĺ
Bracket ĺ AE Bracket.
Original
Exposure +2
White Balance Bracketing (WB Bracket)
When you press [Shutter], the camera captures 3 consecutive photos:
the original and two more with dierent White Balance settings. The
original photo is captured when you press [Shutter]. The other two are
automatically adjusted according to the White Balance you have set. You
can adjust the settings in Bracket Set menu.
To set the shooting
method,
WB-2
This option cannot be used with the RAW le format and is not available when
the photo quality is set to RAW.
Rotate the drive dial to L, press [m] ĺ b ĺ Drive Settings
ĺ
Bracket ĺ WB Bracket.
Original
WB+2
95
Shooting Functions > Drive (shooting method)
Picture Wizard Bracketing (P Wiz Bracket)
When you press [Shutter], the camera captures three consecutive photos,
each with a dierent Picture Wizard setting. The camera captures a photo
and applies the three Picture Wizard options you have set to the image
captured. You can select three dierent settings in Bracket Set menu.
To set the shooting
method,
Vivid
This option cannot be used with the RAW le format and is not available when
the photo quality is set to RAW.
Rotate the drive dial to L, press [m] ĺ b ĺ Drive Settings
ĺ
Bracket ĺ P Wiz Bracket.
Standard
Retro
Depth Bracketing
When you press [Shutter], the camera captures three consecutive photos,
each with a dierent depth of eld. Use a tripod to prevent blurry photos
as the camera captures three photos continuously. You can adjust the
settings in Bracket Set menu.
To set the shooting
method,
This feature is available only in Program or Aperture priority mode.
Rotate the drive dial to L, select [m] ĺ b ĺ Drive Settings
ĺ
Bracket ĺ Depth Bracket.
Bracketing setting
You can set up the options for each bracketing. (p. 157)
To set a bracketing
option,
In Shooting mode, press [m] ĺ d ĺ Bracket Set ĺ
an option.
96
Shooting Functions
s
Shooting Function
Shooting Functions
Interval Capture
Set the shooting interval and the number of shots to be captured
automatically. Use this function to capture photos at regular intervals
during an event such as a lunar eclipse or a sunrise.
To capture an
interval shot,
•
Shooting intervals can be set to seconds if the shooting interval is less than
one minute. For intervals longer than one minute, intervals can be set to
minutes and hours only.
•
Use a shutter release cable with a tripod to minimize camera movement
when capturing interval shots.
•
Connect the power cable if the shooting interval is long or the number of
shots to be taken is high.
In Shooting mode, press [m] ĺ b ĺ Interval Capture
ĺ
a shooting interval and the number of shots.
9797
Shooting Functions
s
Shooting Function
Shooting Functions
Flash
In order to capture a realistic photo of a subject, the amount of light
should be constant. When the light source varies, you can use a ash and
supply a constant amount of light. Select appropriate settings according to
a light source and a subject.
To set ash options,
IconDescription
O: Do not use the ash.
Smart Flash: The camera automatically adjusts the brightness
A
of the ash according to the amount of light in the surrounding
environment.
Auto: The ash automatically res in dark places.
A
Auto Red-eye: The ash automatically res and reduces red-eyes.
Fill in: The ash res whenever you capture a photo. (Brightness is
automatically adjusted.)
Fill-in Red: The ash res whenever you capture a photo and
reduces red-eyes.
1st Curtain: The ash res
immediately after the shutter opens.
The camera captures a photo of a
subject earlier in an action sequence
clearly.
In Shooting mode, press [m] ĺ b ĺ Flash
an option.
Ball moving direction
ĺ
IconDescription
2nd Curtain: The ash res just
before the shutter closes. The
camera captures a photo of a
subject later in an action sequence
clearly.
Hi-speed Sync: If the shutter speed is faster than the sync speed
the ash will re multiple times at high speed. The ash starts to
H
re while the shutter opens. This option is available when you
attach a compatible, external ash only.
•
The available options may dier depending on shooting conditions.
•
There is an interval between two bursts of the ash. Do not move until the
ash res a second time.
•
If you select O, the ash does not re even when an external ash is
attached.
Use only Samsung-approved ashes. Using incompatible ashes may damage
your camera.
Ball moving direction
9898
Shooting Functions > Flash
Reducing the red-eye eect
If the ash res when you capture a photo of a person in the dark, a red
glow may appear in the eyes. To reduce the red-eye eect, select Auto Red-eye, or Fill-in Red.
Without red-eye reductionWith red-eye reduction
If the subject is too far from the camera or moves when the rst ash res, redeyes may not be reduced.
Using the built-in ash
To open the built-in ash, press the ash pop-up button. The ash does
not re when the built-in ash is closed, but automatically pops up and
res when you select Smart Flash, Auto, or Auto Red-eye.
99
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.