4 Main Board
X154-2
4-2-3 Detailed Specifications
4-2-3-1 Main Board
1. CPU’s and Heat-sink
CPU : Intel Pentium M (Banias) CPU.
Package type of CPU : 479pin uFCBGA.
Core Frequency : 1.3 ~ 1.7 GHz
L2 Cache : 1MB
Intel Speed Step( technology. (The Intel
IMVP4 function )
There is no CPU socket.
Heat-sink Performance : 24.5W TDP
The fan speed and operating voltage
depend on the CPU & Main B’D
bottom temperature.
The fan speed is controlled by the
MICOM
2. System Core Logic: Intel 855GM (Montara-
GM) Chipset
Package type : 593pin uFCBGA
Graphic Memory Controller Hub
(GMCH)
400 MHz FSB interface
Supports 200/266 MHz DDR SDRAM
memory interface
Hub interface to ICH4-M and PCI 2.2
compatible bus.
Intel 82801DBM I/O Controller Hub (ICH4M)
Package type : 421pin BGA
33 MHz PCI Bus (PCI 2.2 compatible).
High speed USB 2.0 with 480Mb/s
bandwidth
Supports AC97 Codec
Bus Master IDE controller (Support
Ultra ATA 100/66/33 and PIO modes)
LPC(Low Pin count) interface for BIOS
and Keyboard Controller
Providing powerful power
management features.
Fully supports ACPI Specification 1.0.
3. System Memory
0MB on-board memory
Two 200-pin DDR SDRAM SO-DIMM
(Small Outline-Dual Inline Memory
Modules) sockets
128, 256, 512 MB and 1GB
Max. 2GB
4. System Clocks: System clock : 14.31818 MHz
X-TAL for ICS950810 clock generator. Clock
generator supports:
100MHz for CPU
100MHz, 66MHz for the MCH
33MHz for all PCI clocks
14.318MHz, 48 MHz and 33 MHz and
66MHz for ICH4-M
Other clocks:
32.768 kHz XTAL for ICH4-M real time
clock
24.576MHz XTAL for STAC9752 Audio
Codec.
25MHz XTAL for Intel 82562EZ LAN
Controller.
10MHz XTAL for MICOM
24.576MHz XTAL for R5C593
1394/PCMCIA/Memory stick
Controller.
5. Firmware Hub (BIOS ROM)
Package type : 32-pin PLCC
Capacity : 4 Mbit, 3.3 Volt Read/Write
Flash memory
Manufacturer : SST
Part Number : 49LF004A-33
6. PCMCIA / 1394 Controller / Memory sti
R5C593
PC98/99/2001 compliant
Power decreased by implement of
Power Management supply on the
operation.
Support Serialized IRQ
Support General Purpose IO
Package type : 272pin BGA
Manufacturer: Ricoh
The basic specification for the PCMCIA
support is as follows:
Supports 1 type II PCMCIA
Direct connection to PCI bus and one
PC Card (16bit) or Card Bus (32bit) slot
Compliant with PCI Power
Management Interface 1.0 and ACPI
1.1
This Document can not be used without Samsung’s authorization.