Samsung Muse, SCH-U706 User Manual

Download

Page 1

Samsung Muse

PORTABLE Dual-BAND

MOBILE PHONE

User Manual

Please read this manual before operating your

phone, and keep it for future reference.

Page 2

u706_BB15.10_cb_022108_F6

Intellectual Property

All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.

Samsung Telecommunications America (STA), LLC

Headquarters: Customer Care Center: 1301 E. Lookout Drive 1000 Klein Road Richardson, TX 75082 Plano, TX 75074 Toll Free Tel: 1.888.987.HELP (4357)

Internet Address: http://www.samsungusa.com

©2008 Samsung Telecommunications America, LLC is a registered trademark of Samsung Electronics America, Inc. and its related entities. Samsung Muse is a trademark of Samsung Electronics America, Inc. and its related entities.

Do you have questions about your Samsung Mobile Phone? For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:

www.samsungwireless.com/support

GH68-17192A.

Page 3

Printed in Korea.

Licensed by Qualcomm Incorporated under one or more of the following patents: U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.

T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and other patents pending.

RSA® is a registered Trademark RSA Security, Inc.

Openwave® is a registered Trademark of Openwave, Inc. The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered

trademarks and are wholly owned by the Bluetooth SIG.

Disclaimer of Warranties; Exclusion of Liability

EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE PRODUCT “AS IS”, AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.

Page 4

Table of Contents

Section 1: Getting Started .............................................. 4

Understanding this User Manual . . . . . . . . . . . . . . . . . . . . . . . . 4

Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Setting Up Your Voice Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Memory Card (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Section 2: Understanding Your Phone ...........................9

Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Closed View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Front Open View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . 12

Command Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Understanding the Display Screen . . . . . . . . . . . . . . . . . . . . .16

Your Phone’s Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Section 3: Call Functions .............................................20

Making a Call — Number Entry Dialing . . . . . . . . . . . . . . . . . 20

Making a Call — Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . 21

Making a Call — Voice Dialing . . . . . . . . . . . . . . . . . . . . . . . . 23

Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Adjusting the Call Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Calls Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Section 4: Menu Navigation ......................................... 32

Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Menu Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Section 5: Entering Text ............................................... 34

Text Entry Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Changing the Text Entry Mode . . . . . . . . . . . . . . . . . . . . . . . . 34

Entering Text in Alpha (Abc) Mode . . . . . . . . . . . . . . . . . . . . . 34

Entering Text in T9 Word Mode . . . . . . . . . . . . . . . . . . . . . . . 35

Entering Upper and Lower Case Letters . . . . . . . . . . . . . . . . . 36

Entering Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Entering Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Section 6: Understanding Your Contacts .................... 38

Your Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . 38

Finding a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Renaming a Contacts Group . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Deleting a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Sending a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Memory Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Section 7: Messaging ................................................... 52

Creating and Sending New Messages . . . . . . . . . . . . . . . . . . 52

Message Send Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Receiving New Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Message Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Erasing Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Page 5

Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

General Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Section 8: Axcess Shop ................................................ 65

Finding Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Section 9: Axcess Web ................................................. 66

Axcess Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Launching Axcess Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Using Axcess Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Using Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

How Axcess Web Keys Work . . . . . . . . . . . . . . . . . . . . . . . . . 67

Section 10: Celltop .......................................................68

Celltop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Launching Celltop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Section 11: Camera-Camcorder ..................................69

Taking Pictures and Videos . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Taking Snap Shots (Single Pictures) . . . . . . . . . . . . . . . . . . . . 69

Screen Layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Saving Pictures and Videos . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Camera Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Camcorder Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

The Photo Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Point, Click, and Send Pictures and Videos . . . . . . . . . . . . . . . 88

Section 12: Multimedia ................................................ 90

Accessing Multimedia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Music Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

My Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

My Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

My Ringtones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

My Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Shuffle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Section 13: Tools ........................................................ 102

Tools Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Voice Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Memo Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

World Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

Stop Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Section 14: Changing Your Settings .......................... 119

Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

Sounds Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Call Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

Memory Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

Page 6

Section 15: Phone Info ............................................... 140

Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

Icon Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

Section 16: Health and Safety Information ...............141

Health and Safety Information . . . . . . . . . . . . . . . . . . . . . . . . 141

Samsung Mobile Products and Recycling . . . . . . . . . . . . . . . 142

UL Certified Travel Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 142

Consumer Information on Wireless Phones . . . . . . . . . . . . . . 143

Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148

Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

Using Your Phone Near Other Electronic Devices . . . . . . . . . 152

FCC Hearing-Aid Compatibility (HAC) Regulations for

Wireless Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

Potentially Explosive Environments . . . . . . . . . . . . . . . . . . . . 154

Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154

FCC Notice and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 155

Other Important Safety Information . . . . . . . . . . . . . . . . . . . . 156

Product Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156

Availability of Various Features/Ring Tones . . . . . . . . . . . . . . 157

Battery Standby and Talk Time . . . . . . . . . . . . . . . . . . . . . . . 157

Battery Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159

Section 17: Warranty Information .............................160

Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 160

Index ............................................................................ 164

Page 7

Getting Started 4

Section 1: Getting Started

This section explains how to start using your phone by activating your service, setting up your voice mail, or getting an understanding of how this manual is put together.

Understanding this User Manual

The chapters of this guide generally follow the same order as the menus and sub-menus in your phone. A robust index for quick reference to most features begins on page 164.

Also included is important safety information that you should know before using your phone. Most of this information is near the back of the guide, beginning on page 141.

Notes and Tips

Throughout this guide are icons and text that are set apart from the rest. These are intended to point out important information, quick methods for activating features, to define terms, and more. The definitions for these methods are as follows:

•

Notes:

Explain alternative options within the current feature, menu, or

sub menu.

•

Tips: Provide quick or innovative methods for performing functions

related to the subject at hand.

•

Important:

Points out important information about the current feature

that could affect performance, or even damage your phone.

Activating Your Phone

Contact your Wireless Carrier and follow their instructions for obtaining service, if necessary. We suggest that you read this guide to fully understand the services your phone supports.

Install

the Battery

Note:

Your phone comes packaged with a partially charged rechargeable standard Li-Ion battery and travel adapter.

Important!:

You must fully charge the battery the first time you use your phone, otherwise you could damage the battery.

Page 8

Insert the top end (1) of the

battery first, matching the

gold contacts on the top

end of the battery to those

inside of the phone.

2. Press the bottom end of

the battery (2) down into

the phone.

3. Place the battery cover

over the battery and slide

the cover upward into

place (3) until it clicks.

Turn Your Phone On

1. Open the flip on your phone, as shown.

2. Press the key.

Note:

As with any other radio-transmitting device, do not touch the antenna while using your phone as this can affect call quality and can cause the phone to operate at a higher power level than is necessary.

3. The phone begins searching for a network

signal.

4. Once the phone finds a signal, the time, date,

and day appear at the top of the display.

5. You’re now ready to place and receive calls.

Note:

If you are outside of your carrier’s coverage or roaming area ( ), the No Service icon ( ) appears at the top of the phone’s display. If you cannot place or receive calls, try later when service is available, or at another location.

Turn Your Phone Off

1. Open the flip on your phone, if closed.

2. Press and hold the key for two or more seconds. Your

phone powers off.



Page 9

Getting Started 6

Note:

If your phone is on and you press for less than one second, the phone will not power off. This prevents your phone from being turned off accidentally.

Remove the Battery

Important!:

You must unplug the Travel Adapter (if it is connected) before removing the battery from the phone during charging to avoid damage.

1. Press and hold the

key to turn off the phone (if

on).

2. Move the cover latch (1)

toward the bottom end of

the phone.

3. Lift the cover (2) up and

away from the phone,

bottom end first.

4. Lift the battery up (3) and

away (4) from the phone, bottom end first.

Charging the Battery

Your phone is powered by a rechargeable standard Li-Ion battery. Only use Samsung-approved charging devices and batteries. Samsung accessories are designed to maximize battery life.

Using other accessories may invalidate your warranty and may cause damage.

Using the Travel Adapter

The travel adapter included with your phone is a convenient, light-weight charger that rapidly charges your phone from any 120/220 VAC outlet.

1. Plug the large end of the Travel

Adapter into a standard 120 VAC

or 220 VAC wall outlet.

Note:

For connection to an electrical supply not located in North America, you must use an adaptor of the proper configuration for the power outlet. Use of the wrong adapter could damage your phone and void your warranty.





Page 10

Insert the smaller end of the Travel Adapter into the

charger/accessory connector on the left side of your

phone.

Note:

With the device turned OFF, a discharged battery recharges fully in approximately 4 hours.

Low Battery Indicator

The battery indicator ( ) in the upper-right corner of the display indicates power level. Monitor the battery strength and ensure your battery is adequately charged.

•

Three bars ( ) indicate a full charge.

•

An empty battery icon ( ) indicates a near empty battery.

•

A blinking empty battery icon ( ) and a tone sounding indicate you have two to three minutes before the battery is too low to operate the phone.

If you continue to use your phone without charging its battery, the phone shuts down.

Setting Up Your Voice Mail

Voice mail allows callers to leave voice messages, which can be retrieved any time.

Note:

Once your voice mail account has been set up, you can use the Voice Mail folder (under the Message menu) to view details of voice messages in your voice mail box.

1. In standby mode, press and hold the key or dial your

own mobile number to dial voice mail.

2. Follow the prompts in the new user tutorial to setup your

voice mail box.

Listening to Voice Mail

1. In standby mode, press and hold the key or dial your

own mobile number to dial voice mail. After connecting,

you will hear your voice greeting.

2. You are then prompted to enter your password.

Incorrect

Correct

Page 11

Getting Started 8

Enter your password and follow the prompts to listen to

your voice mail.

Memory Card (Optional)

Your phone has a memory card slot in the battery cavity, above the battery. You can install a microSDTM card to provide additional memory for storing files (such as, sound files and photos) in your phone.

Install a Memory Card

1. Removed the cover latch and battery. (For more

information, refer to “Remove the Battery” on page 6.)

2. Make sure that the gold contacts of the card are face

down. Slide the memory card into the memory card slot.

3. Replace the battery and cover.

Remove a Memor y Card

1. Removed the cover latch and battery. (For more

information, refer to “Remove the Battery” on page 6.)

2. Remove the memory card from the memory card slot.

3. If desired, install another memory card. (For more

information, refer to “Install a Memory Card” on page 8.)

4. Replace the battery and cover.

Page 12

Section 2: Understanding Your Phone

This section outlines some key features of your phone. It also displays the screen and the icons that are displayed when the phone is in use.

Features of Your Phone

•

Domestic and international voice and text messaging service (available on participating networks).

•

High speed data (CDMA EVDO Technology)

•

Global Positioning (GPS) Technology

•

Personal Information Management (PIM) functions (Calendar, Calculator, and so on)

•

Video Messaging

•

MMS Messaging

•

Text Messaging

•

Email Messaging

•

2.0 Megapixel Camera with Camcorder function

•

Advanced Music Player (MP3 compatible)

•

Advanced Speech Recognition

•

Speakerphone

•

microSDTM Memory Card slot

•

Bluetooth® Wireless Technology (see Note)

Note:

The Samsung Muse phone supports the wireless headset, handsfree, dial-up networking, A2DP, Phonebook Access, object push, serial port, file transfer profiles for Bluetooth® wireless technology. The Samsung Muse does not support all Bluetooth OBEX profiles.

Page 13

Understanding Your Phone 10

Closed View of Your Phone

Features

Camera Lens

— The lens of your built-in camera.

Camera/Camcorder

— With the phone closed and idle,

pressing and holding this key launces the Camera feature,

then pressing this key takes and saves a picture.

Volume Keys

— With the phone closed and idle, turns on

the front display backlight when pressed.

When receiving a call, mutes the ringer.

When playing music, adjusts the Media Player volume.

Front Display

— Indicates the status of your phone,

including status icons, message indicators, signal

strength, and so on. Shows time and date.

Mirror

— Used to center the image when taking self-

portraits.

Stereo Speakers

— Enabled by Speakerphone key or

Media Player for handsfree operation or to play music.

Page 14

Hold

— With the phone closed and idle, launches the

Music Player in your phone when pressed and held.

Power/

Accessory Connector

— Used to plug in the charging

accessories and also connect any available accessory

cables to your phone.

Headset Connector

— Lets you plug in an optional headset

for safe, convenient, hands-free conversations.

Page 15

Understanding Your Phone 12

Front Open View of Your Phone

Features

Earpiece

— Lets you hear the other caller.

Main Display

— Indicates the status of your phone,

including status icons, message indicators, signal

strength, and so on. Shows menus, calls, and messages.

Camera/Camcorder

— With the flip open, launches the

Camera in your phone.

When in Camera or Camcorder mode, switches between

Camera and Camcorder.

Left Soft Key

— Used to navigate through menus and

applications and to select the choice available in the Left

Soft key option.

Volume Keys

— With the phone open and idle, adjusts the

call ringer volume when pressed.

When receiving a call, mutes the ringer.

Speakerphone Key

— Press and hold to turn Speakerphone

mode On and Off.

TALK Key

— Lets you place or receive a call. In standby

mode, press the key once to access the recent call log.

Page 16

Navigation Key

— Lets you scroll through the phone menu

options.

Microphone

— Lets the other caller hear you clearly when

you are speaking to them.

10.

Special Function Keys

— Enters special characters and

performs various functions. For example, pressing and

holding the asterisk key toggles the lock function on

the phone.

In text mode, pressing the pound key

inserts a

space.

In Standby mode, pressing and holding the pound key

operates the Jump Tab feature.

11. Voice Recognition Key — Launches VoiceSignal options

by pressing and holding the

key.

12.

Alphanumeric Keys

— Use these keys to enter numbers,

letters, and characters.

13.

BACK Key

— Deletes characters from the display when you

are in text entry mode. Press this key to return to the

previous menu or screen when navigating features on your

phone.

14.

END Key

— Ends a call. If you press and hold the END key,

the power goes On or Off. When you receive an incoming

call, press to send the call to voicemail.

15.

Music Key

— Launches Music options.

16.

MENU/OK Key

— In idle mode, launches the Main Menu.

When navigating through a menu, accepts the highlighted

choice in the menu.

17.

Right Soft Key

— Used to navigate through menus and

applications and to select the choice available in the Right

Soft key option.

Command Keys

Functions for the soft keys are defined by what appears above each in the display. There are two soft keys, the left soft key ( ) and the right soft key ( ).

Left Soft Key

Some functions of the left soft key are as follows.

•

In standby mode, press the

Celltop

(left) soft key ( ) to launch the

Celltop application. (For more information, see the Celltop user guide.)

•

When the left soft key function is Edit, press the

Edit

(left) soft key

( ) to edit a Contact.

Page 17

Understanding Your Phone 14

•

When the right soft key function is Erase, press the

Erase

(left) soft key ( ) and a pop-up window appears prompting you to confirm the erasure.

Right Soft Key

Some functions of the right soft key are as follows.

•

In standby mode, press the

Message

(right) soft key ( ) to open the

Messages menu.

•

When the right soft key function is Back, press the

Back

(right) soft key ( ) to back up one menu level.

•

When the right soft key function is Options, press the

Options

(right)

soft key ( ) and a pop-up menu appears.

OK Key

•

In standby mode, press the

key ( ) to open the main menu.

•

In a menu, press the OK key ( ) to accept the highlighted selection.

•

In camera mode, press the OK key ( ) to take a photo or to create a Pic message.

•

When the OK key function is Edit, press the

Edit

(OK) key ( ) to edit

a Draft message.

Speakerphone Key

In standby mode or during a call, pressing and holding the Speakerphone key ( ) places your phone in speakerphone mode, allowing you to use your phone handsfree and/or to

include other nearby persons in a call. (For more information, refer to “Responsible Listening” on page 150.)

In speakerphone mode, pressing and holding the Speakerphone key ( ) disables speakerphone mode.

Voice Recognition Key

In standby mode, pressing and holding the Voice Recognition key ( ), launches the VoiceSignal application, enabling you to use spoken commands to control your phone. For more information, refer to “Voice Service” on page 102.

Music Key

In standby mode, pressing the

Music

key launches the

music options for your phone.

BACK Key

The

BACK

key ( ) is used to erase or clear numbers, text, or symbols from the display. You can also use the key to return to a previous menu or to return to standby mode from any menu.

1. If you enter an incorrect character, briefly press to

backspace (and delete) the character.

2. To erase the entire sentence, press and hold .

3. To back up one menu level, briefly press .

Page 18

To return to standby mode, press and hold until you

return to standby mode.

END Key

1. In standby mode, press and hold the

END

key ( ) to turn

your phone off.

2. Briefly press once to disconnect a call.

3. Press to return to standby mode from any menu, or to

cancel the last input.

4. With your phone turned off, press to turn your phone

on.

TAL K Key

The

TALK

key ( ) is used to answer calls, dial calls, and to

recall the last number(s) dialed, received, or missed.

1. Press once to answer calls.

2. Enter a number and briefly press to make a call.

3. Briefly press in standby mode to display a list of

recent calls to and from your phone.

4. Press twice in standby mode to call the most recent

number.

5. Press to pick up a waiting call. Press again to

switch back to the other call.

avigation Key

Use the directional keys on the Navigation key ( ) to browse menus, sub-menus, and lists. In standby mode, the directional keys also act as shortcuts to launch applications.

amera Key

In standby mode, momentarily press the Camera key ( ) — located on the left side of your phone — to activate the camera built into your phone.

With the phone closed, you can use the Camera feature by pressing and holding the Camera key. Then press the button to take a picture.

With the phone opened, you can use the Camera feature by pressing the Camera button. Press the button again to toggle between the camera and the camcorder mode.

Page 19

Understanding Your Phone 16

Understanding the Display Screen

1. The top line of your

phone’s main display

contains icons that

indicate network status,

battery power, signal

strength, connection type,

and more.

2. The center portion of the

main display shows

information such as call progress information, messages,

and photos.

3. The bottom line of the main display shows current soft key

functions. The sample screen shows that pressing the

Left

soft key ( ) will launch the

Celltop

application, pressing

the

key ( ) will display the Main Menu, and

pressing the

Right

soft key ( ) will show the

Messages

menu.

Display Screen Icons

Your Samsung Muse can show you definitions of the icons that appear on the top lines of the front and main displays. To access the Icon Glossary:

䊳

In standby mode, press the

key ( ), then press

(for

Phone Info

) and or

Icon Glossary

. A list shows

of the icons that can appear on the top line of the display.

Dialogue Boxes

Dialogue boxes prompt for action, inform you of status, or warn of situations such as low memory. Dialogue boxes and their definitions are outlined below.

•

Choice

–

Example: “Save message?”

•

Reconfirm

–

Example: “Erase all messages?”

•

Performing

–

Example: “SENDING...” “Connecting...”

•

Completed

–

Example: “Message saved”

•

Information

–

Example: “New Message”

•

Error

–

Example: “Card not available, Insert card”

Page 20

•

Warning

–

Example: “Low Battery,” “Memory Full!”

Backlights

Backlights illuminate the display and the keypad. When you press any key or open the phone, the backlights come on. They go off when no keys are pressed within a period of time set in the

Backlight

menu.

Note:

Prolonged backlight use drains your battery faster.

For more information, refer to “Backlight” on page 122.

Your Phone’s Modes

Call Answer Mode

You can select how you wish to answer a call.

1. In standby mode, press the

key ( ), then press

(for

Settings

), (for

Call Settings

), and for

Call

Answer

. The following call answer options appear in the

display:

•Any Key

— Pressing any key except the key or key

answers a call.

•Talk Key

— Only pressing answers a call.

• Flip Open

— Only opening the flip or pressing answers a

call.

Tip:

You can set your phone to answer calls automatically, without any input from you. (For more information, refer to “Auto Answer” on page 126.)

2. Use the Navigation key to highlight an option.

3. Press the key to select the method for answering

calls.

Input mode

Input mode determines how you enter text, numbers and symbols. While at any text entry screen, press the Left soft key ( ), then choose the input mode from the pop-up menu using the navigation keys. Optional input modes are

T9 Word, Abc, ABC

123

, and

Symbols

. (For more information, refer to “Entering Text”

on page 34.)

Tip:

You can also cycle between T9 Word, Abc, and 123 by repeatedly pressing and holding the key.

Lock Modes

Phone Lock

When the phone is in Phone Lock mode, restrictions are placed on phone use. You can receive calls and messages, but cannot place outgoing calls (except for emergency numbers) until you unlock the phone. Phone Lock mode also restricts access to menus and the volume key. Unlock your phone by entering the

Page 21

Understanding Your Phone 18

lock code when prompted. (For more information, refer to “Lock Phone” on page 128.)

Standby Mode

Standby mode is the state of the phone once it has found service and is idle. The phone goes into standby mode:

•

After you power the phone on.

•

When you press after a call or from within a menu.

In standby mode, you will see the time, day, and date as well as all active phone status icons.

1. While in standby mode, enter a phone number, and press

to place a call.

2. Press to end the call and return to standby mode.

Receive Messages in Standby Mode

You can receive messages in standby mode. An alert tone sounds and a notification message appears in the display when a new message arrives. The following options also appear in the display:

•

View Now

•

View Later

Use the Navigation key to highlight the desired option and press the key.

Talk Mode

You can place and receive calls only when your phone is on. While in a call your phone is in Talk mode. Press the

Options

(right) soft key ( ) to display a list of menu options. For more information, refer to “The In-Use Options” on page 32.

Speakerphone Mode

While in standby mode or Talk mode, press and hold the Speakerphone key ( ) to switch from using the earpiece to the speakerphone (speakerphone option) and back to using the earpiece. Use the volume keys — located on the left side of your phone — to adjust the volume.

In Speakerphone mode, press and hold the Speakerphone key ( ) to switch back to using the earpiece.

Vibrate Mode

Silence all tones your phone makes and replace them with vibrations.

䊳

In standby mode, repeatedly press and the Down volume

key ( ) until

Vibrate

appears in the display.

The volume key is on the upper left side of phone, near the

upper left soft corner of the display.

Page 22

Adjust the Ringer

1. In standby mode, press the Volume key ( ) on the left

side of the phone up or down. Options are:

2. When you are satisfied with the setting, press the SET key

( ). Your phone returns to standby mode.

Tip:

You can also access the Volume-Voice Calls sub-menu by pressing the

key ( ), then pressing the , , , and keys. Use the Navigation key or the Volume key (on the upper left side of your phone) to adjust the ringer volume setting.

Note:

The Vibrate icon ( ) appears in the display when the phone is in Vibrate mode.

•

High

•

1 Beep

•

Medium/High

•

Vibrate

•

Medium

•

Silence All

•

Low

Page 23

Call Functions 20

Section 3: Call Functions

This section explains how to make or answer a call. This section also includes the features and functionality associated with making or answering a call.

Making a Call — Number Entry Dialing

1. With the phone on, enter the number you wish to call using

the keypad.

2. Press the key to place the call.

Dialing Emergency Numbers

To place an emergency call:

1. With the phone on, enter 911 using the keypad.

2. Press the key to place the call.

You can specify other numbers as emergency numbers using the

Emergency #

settings. (For more information, refer to “Emergency

#” on page 129.)

Important!:

Emergency number 911 is preset into your phone. You can dial this number almost any time, even when the phone is locked or restricted. If you call 911 an audible tone is heard and an Emergency prompt appears in the display for the duration of the call.

Important!:

Because of various transmission methods, network parameters, and user settings necessary to complete a call from your wireless phone, a connection cannot always be guaranteed. Therefore, emergency calling may not be available on all wireless networks at all times.

Important!:

DO NOT depend on this phone as a primary method of calling 911 or for any other essential or emergency communications.

Dialing International Numbers

Call another country from the U.S.

1. In standby mode, enter the three-digit exit code (011) for

the United States.

2. Enter the country code for the country that you are calling.

3. Enter the number that you wish to call, then press the

key.

Note:

Puerto Rico and Canada are on the North American dialing plan. When making calls to Puerto Rico and Canada it is similar to making calls within the United States, no unique country codes are necessary.

Page 24

Placing calls when outside the U.S. — Mexico

•

Calling locally within Mexico

: Dial the seven or eight-digit number.

•

Calling long distance within Mexico

: Dial 01, plus the ten-digit

number (includes area code).

•

Calling to the U.S. or Canada from Mexico

: Dial 001, plus the ten-

digit number (includes area code).

•

Calling Voicemail from Mexico

: Dial 001, plus your ten-digit wireless number. Once you hear the recorded prompt, press and enter your passcode.

Manual Pause Calling

When you call automated systems (like banking services), you are often required to enter a password or account number. Instead of manually entering the numbers each time, you can store the numbers in your Contacts along with special characters called pauses.

•

P pause

— A hard pause stops the calling sequence until you press

the key.

•

T pause

— A two-second pause stops the calling sequence for two

seconds and then automatically sends the remaining digits.

To manually call a number with pause(s) without storing it to your Contacts:

1. Enter the number you wish to call.

2. Press the

Options

(right) soft key ( ). A pop-up menu

containing the following options appears in the display:

•Search

• P pause

— a hard pause (awaits input from you).

• T pause

— a two-second pause.

• Send Message

— send a text, picture, or video message.

3. Use the navigation keys to highlight the desired pause

option.

4. Press to enter the highlighted pause into your number

sequence.

5. Press to call the number.

Making a Call — Speed Dialing

You can store phone numbers and contact names in your phone’s Contacts list. Speed Dialing lets you quickly and easily dial any contact in your Contacts list by using that contact’s location number in the list. You can assign and change location (speed dial) numbers for your contacts. (For more information, refer to “Assigning Speed Dial Numbers” on page 46.)

One-Touch Dialing

Speed Dial numbers 002 through 009 are special One-Touch dialing numbers. You can call the phone numbers stored in your

Page 25

Call Functions 22

phone’s Contacts list and assigned Speed Dial numbers 002 through 009 by pressing and holding a single key.

Example:

For Speed Dial number 003, press and hold the key until the name and number appear in the display and the number is dialed.

Two-Touch Dialing

Memory locations 010 through 099 are special Two-Touch dialing locations.

Example:

For location number 013, briefly press the key, then press and hold the key until the name and number appear in the display and the number is dialed.

Three-Touch Dialing

Memory locations 100 through 999 are special Three-Touch dialing locations.

Example:

For location number 113, briefly press the key, briefly press the key again, then press and hold the key until the name and number appear in the display and the number is dialed.

Pause Dialing From a Contacts Entry

•

If you speed dial a contact that contains (two-second) T pause(s) simply wait for the pauses to pass and the dialing to complete.

•

If you speed dial a contact that contains (hard) P pause(s), wait for the appropriate prompt(s) from the number you are calling (credit card

number, bank account number, and so on) and enter the appropriate response(s).

Making a Call — Quick Search Dialing

Use the

Quick Search

feature to dial any number stored in your Contacts list by pressing the number keys that correspond to the first few letters of a Contact name.

Activating Quick Search

1. In standby mode, press the

key ( ), then press

(for

Settings

), for

Phone Settings

and for

Quick Search

2. Use the navigation keys to highlight On, then press to

set the

Quick Search

feature.

Quick Search Dialing a Contact

To find and dial a Contact, do the following:

1. In standby mode, press the Down navigation key. The

Contact List

screen appears.

2. Press the number keys that correspond to the first few

letters of the Contact name. The desired Contact name is

highlighted.

3. Press to call the number.

Page 26

Making a Call — Voice Dialing

Your Samsung mobile phone includes state-of-the-art voice recognition software that lets you dial numbers using your voice.

Using Voice Dial

Use the

Voice Dial

command to dial any number stored in your Contacts list by saying the name of the contact (Name Dialing). You can also use Voice Dial to dial any valid telephone number, even numbers not stored in your contact list, by speaking the individual digits in the number (Digit Dialing).

Voice Dialing Tips:

•

Wait for the beep before speaking.

•

Speak clearly at a normal volume, as if you were talking to someone on the phone.

•

When saying a name, say the first name then the last name.

Dialing a Name

To dial a name, do the following:

1. In standby mode, press and hold the

key.

“

Say a Command

” appears in the display and is

pronounced through the earpiece.

2. Say, “

Call

”.

You are prompted to “

Say the name or #

”.

3. Speak clearly and say the name of a person in your

Contacts list, first name followed by last name.

If the name is recognized, Voice Dial repeats the name and

dials the number.

If Voice Dial is not sure which name you said, it displays a

choice list of up to three names and prompts you with “Did

you say?” followed by the first name on the list.

4. Say “

Ye s

” to confirm the name or “No” to hear the next

name, or use the keypad to select the correct name from

the list. (For more information, refer to “Choice Lists” on

page 104.)

•

Press the

Repeat

(right) soft key ( ) to say the name again.

•

Press the

Settings

(left) soft key ( ), then press the Exit (right)

soft key ( ) to exit Voice Dial without dialing.

If the recognized name has multiple numbers stored for it

(that is, Home, Work, Mobile, and so on), Voice Dial

displays the possible choices and prompts you with “

Which

number?

”

5. Say one of the following number types:

•“Home

”

Page 27

Call Functions 24

•“Work

”

•“Mobile

”

•“My Circle

”

Voice Dial dials the specified number.

Dialing a Number

To dial a number using Voice Dial, do the following:

1. In standby mode, press and hold the

key.

“

Say a Command

” appears in the display and is

pronounced through the speaker.

2. Say “

Call

”.

VoiceSignal prompts you to “

Say the name or #

”.

3. Speak clearly and say the telephone number of the person

you want to call. For example, say “7 8 1 9 7 0 5 2 0 0."

If it recognizes the number, Voice Dial repeats and dials the

number. If Voice Dial is not sure it has recognized the

number, it displays a choice list of up to three numbers and

prompts you with “

Did you say?

” followed by the first

number on the list.

4. Say “

Ye s

” to confirm the number or “No” to hear the next

one, or use the keypad to select the correct number from

the list. (For more information, refer to “Choice Lists” on

page 104.)

•

Press the

Repeat

(right) soft key ( ) to say the name again.

•

Press the

Settings

(left) soft key ( ), then press the

Exit

(right)

soft key ( ) to exit Voice Dial without dialing.

Pause Dialing From a Contacts Entry

•

If you voice dial a contact that contains (two-second) T pause(s) simply wait for the pauses to pass and the dialing to complete.

•

If you voice dial a contact that contains (hard) P pause(s), wait for the appropriate prompt(s) from the number you are calling (credit card number, bank account number, and so on) and enter the appropriate response(s).

Answering a Call

Your phone notifies you of a call in the following ways:

•

A ring tone sounds and/or your phone vibrates (Your phone provides seven ring volume settings including:

Silence All, Vibrate, 1 Beep

Low, Medium, Medium/High

, or

High

, and/or different ring types to

distinguish callers.)

•

A phone number (unless blocked by the caller) and a name appear in the display (If the caller’s number and name are stored in your Contacts list).

Page 28

•

If the caller can’t be identified,

Call from unavailable#, Call from

restricted number

, or no number appears in the display.

•

Your phone continues to notify you of the call until one of the following events occurs:

•

You answer the call.

•

You ignore the call.

•

The calling party ends the call.

•

The call is sent to voicemail.

Answering an Incoming Call

䊳

Press the key. The ring tone and/or vibration stop and the

caller’s voice can be heard in the earpiece.

Tip:

You can set your phone to answer calls when you press any key but the

key or automatically. (For more information, refer to “Call Settings”

on page 125.)

Ignoring a Call

When you ignore an incoming call, the call is immediately forwarded to your voice mail.

䊳

During an incoming call, press the

Ignore

(right) soft key ( ).

The caller is forwarded to your voice mail.

Adjusting the Call Volume

In standby mode, repeatedly press the volume key ( ) down until the Call Volume Level desired appears in the display. The volume key is on the left side of phone.

Calls Log

The Calls log retains information about Outgoing, Incoming, and Missed calls. You can also view times for your last call and the time totals for all calls.

Review the Calls Log

1. In standby mode, press the

key ( ). The Main

Menu appears in the display.

2. Press the key (for

Calls

3. Press the number key associated with the Calls log that

you wish to review or the function you wish to access:

•

Press for

Outgoing Calls

•

Press for

Incoming Calls

•

Press for

Missed Calls

•

Press for

All Calls

•

Press for

Data Call

•

Press for

Call Timer

•

Press for

Data Counter

Page 29

Call Functions 26

Note:

In cases where there is a Contacts match for a Calls log entry, the name associated with the number appears in the display instead of the number.

Outgoing Calls

Your phone retains information about the last 90 outgoing calls and stores them in the Outgoing calls log. You can review the Outgoing calls log for the time and date of a call, as well as other information.

Note:

To quickly view your most recent calls, briefly press in standby mode. Up to 270 of your most recent outgoing, incoming, and missed calls appear in the display.

1. In standby mode, press the

key ( ), then press

(for

Calls

) and for

Outgoing Calls

. A list of your

outgoing calls appears in the display.

2. Use the navigation keys to highlight a call, then press

to view further information about the call.

3. Press the Options (right) soft key ( ). A pop-up menu

containing the following options appears in the display:

•Save

— Save the number to your Contacts.

• Details

— Calls to Contacts Only — Shows the entry for the called

Contact.

•Erase

— Erase the selected call from your Outgoing call log.

•Lock/Unlock

— Protect the selected call from being erased.

•Erase All

— Erase all calls from your Outgoing call log.

•View Timer

— Shows the number of calls and/or the total time spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming Calls, All Calls, Last Reset, and Lifetime Calls.

4. Press the

Msgs

(left) soft key ( ). The following options

appear in the display:

•Text Message

— Lets you send a text message to the selected

number called.

• Picture Message

— Lets you send a picture message to the

selected number called.

• Video Message

— Lets you send a video message to the selected

number called.

Note:

For more information, refer to “Creating and Sending New Messages”

on page 52.

5. Use the navigation keys to highlight an option.

6. Press the key to perform the highlighted option’s

function.

Incoming Calls

Your phone retains information about the last 90 Incoming calls and stores them in the Incoming call log. You can review the

Page 30

Incoming call log for the time and date of the call, as well as other information.

1. In standby mode, press the

key ( ), then press

(for

Calls

) and for

Incoming Calls

. A list of your

Incoming calls appears in the display.

2. Use the navigation keys to highlight a call, then press

to view further information about the call.

3. Press the

Options

(right) soft key ( ). A pop-up menu

containing the following options appears in the display:

•Save

— Save the number to your Contacts.

• Details

— Calls from Contacts Only — Shows the entry for the

calling Contact.

•Erase

— Erase the selected call from your Incoming calls log.

•Lock/Unlock

— Protect the selected call from being erased.

•Erase All

— Erase all calls from your Incoming calls log.

•View Timer

— Shows the number of calls and/or the total time spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming Calls, All Calls, Last Reset, Lifetime Calls.

4. Press the

Msgs

(left) soft key ( ). The following options

appear in the display:

•Text Message

— Lets you send a text message to the selected

calling number.

• Picture Message

— Lets you send a picture message to the

selected calling number.

• Video Message

— Lets you send a video message to the selected

number called.

Note:

For more information, refer to “Creating and Sending New Messages” on page 52.

5. Use the navigation keys to highlight an option.

6. Press the key to perform the highlighted option’s

function.

Missed Calls

Your phone retains information about the last 90 missed calls (calls that were never picked up) and stores them in the Missed call log. You can review the Missed call log for the time and date of the call, as well as other information.

1. In standby mode, press the

key ( ), then press

(for

Calls

) and for

Missed Calls

. A list of your

missed calls appears in the display.

2. Use the navigation keys to highlight a call, then press

to view further information about the call.

3. Press the

Options

(right) soft key ( ). A pop-up menu

containing the following options appears in the display:

Page 31

Call Functions 28

•Save

— Save the number to your Contacts.

• Details

— Calls from Contacts Only — Shows the entry for the

calling Contact.

•Erase

— Erase the selected call from your Missed call log.

•Lock/Unlock

— Protect the selected call from being erased.

•Erase All

— Erase all calls from your Missed call log.

•View Timer

— Shows the number of calls and/or the total time spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming Calls, All Calls, Last Reset, Lifetime Calls.

4. Press the

Msgs

(left) soft key ( ). The following options

appear in the display:

•Text Message

— Lets you send a text message to the selected

called number.

• Picture Message

— Lets you send a picture message to the

selected called number.

• Video Message

— Lets you send a video message to the selected

number called.

Note:

For more information, refer to “Creating and Sending New Messages”

on page 52.

5. Use the navigation keys to highlight an option.

6. Press the key to perform the highlighted option’s

function.

All Calls

You can review all of the calls log entries (outgoing, incoming, and missed calls) for the time and date of a call, as well as other information.

1. In standby mode, press the

key ( ), then press

(for

Calls

) and for

All Calls

. A list of all logged

calls appears in the display.

2. Use the navigation keys to highlight a call, then press

to view further information about the call.

3. Press the

Options

(right) soft key ( ). A pop-up menu

containing the following options appears in the display:

•Save

— Save the number to your Contacts.

• Details

— Calls from Contacts Only — Shows the entry for the

calling/called Contact.

•Erase

— Erase the selected call from your Calls log.

•Lock/Unlock

— Protect the selected call from being erased.

•Erase All

— Erase all calls from your Calls log.

•View Timer

— Shows the number of calls and/or the total time spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming Calls, All Calls, Last Reset, Lifetime Calls.

4. Press the

Msgs

(left) soft key ( ). The following options

appear in the display:

Page 32

•Text Message

— Lets you send a text message to the selected

calling/called number.

• Picture Message

— Lets you send a picture message to the

selected calling/called number.

• Video Message

— Lets you send a video message to the selected

number calling/called.

Note:

For more information, refer to “Creating and Sending New Messages” on page 52.

5. Use the navigation keys to highlight an option.

6. Press the key to perform the highlighted option’s

function.

Data Call

Your phone retains information about the last 10 data calls and stores them in the Data call log. You can review the Data call log for the time and date of the call, as well as other information.

1. In standby mode, press the

key ( ), then press

(for

Calls

) and for

Data Call

. A list of your missed

calls appears in the display.

2. Use the navigation keys to highlight a call, then press

to view further information about the call.

3. Press the

Options

(right) soft key ( ). A pop-up menu

containing the following options appears in the display:

•Erase

— Erase the selected call from your Data call log.

•Lock/Unlock

— Protect the selected call from being erased.

•Erase All

— Erase all calls from your Data call log.

• Data Counter

— Shows the amount of data Transmitted and Received during this call, the Total amount of data exchanged during this call, and the total amount of data exchanged since the phone was activated.

4. Use the navigation keys to highlight an option.

5. Press the key to perform the highlighted option’s

function.

Call Timer

View the duration of your last call, total calls, and calls made during the life cycle of you phone using the Call Timer feature.

Note:

Call Timer is not for billing purposes.

1. In standby mode, press the

key ( ), then press

(for

Calls

) and for

Call Timer

. The following

options appear in the display:

•Last Call

— View the duration of your last call.

Page 33

Call Functions 30

• Outgoing Calls

— View the duration of the total outgoing calls

made on your phone since the last erasure.

• Incoming Calls

— View the duration of the total incoming calls

received on your phone since the last erasure.

• Roaming Calls

— View the total calls duration on your phone while

roaming since the last erasure.

• All Calls

— View the duration of the total call, incoming, outgoing,

and data calls made on your phone since the last erasure.

•Last Reset

— View the time and date all timers were last reset.

• Lifetime Calls

— View the duration of all calls since your phone

was activated.

2. Press the

Reset

(left) soft key ( ) to reset a selected

counter except Last Reset and Lifetime Calls.

3. Press the

Reset All

(right) soft key ( ) to reset all counters

except Lifetime Calls.

4. Press the key or the key if you wish to exit the

list.

Note:

Although Total call timers can be erased, the Lifetime call timer can never be erased.

Data Counter

View the amount of Transmit data, Receive data, and Total data transmitted or received since the last time you reset the data counters, and the Lifetime amount of data transmitted or received.

Note:

Data Counter is not for billing purposes.

1. In standby mode, press the

key ( ), then press

(for

Calls

) and for

Data Counter

. The following

options appear in the display:

• Transmitted

— View the total amount of data transmitted by your

phone since the last reset.

• Received

— View the total amount of data received by your phone

since the last reset.

•Total

— View the total amount of data sent or received by your

phone since the last reset.

•Last Reset

— View the time and date all timers were last reset.

• Lifetime Data Counter

— View the total amount of data sent or received by your phone since activation (Lifetime Data Counter cannot be reset).

2. Press the

Reset

(left) soft key ( ) to reset a selected

counter except Last Reset and Lifetime Data Counter.

Page 34

Press the

Reset

All (right) soft key ( ) to reset all counters

except Lifetime Data Counter.

4. Press the key or the key if you wish to exit the list.

Note:

Although Total data counters can be erased, the Lifetime Data Counter can never be erased.

Roaming

What is Roaming?

Roaming lets you use your The Samsung Muse phone when you travel outside of your Wireless Provider’s coverage area. The Roaming icon ( ) appears in the top line of the display when Roaming is active, and extra charges may apply when making or receiving calls.

Note:

Some features may be unavailable while roaming. Roaming also consumes additional power from the battery requiring more frequent recharging. Contact your Wireless Provider for more information about Roaming.

How Roaming Works

Roam Option lets you set roaming preferences if you move in and out of your home network. The following roaming options are available:

•

Home only

— Your phone is available for normal operation only in the

designated coverage area.

•

Automatic-A

— Your Wireless Provider’s Preferred Roaming List (PRL) of networks is used to acquire service. If no preferred networks are found, any digital “A” system is acquired.

•

Automatic-B

— Your Wireless Provider’s PRL is used to acquire service. If no preferred networks are found, any digital “B” system is acquired.

Note:

For more information, refer to “System Select” on page 132.

Page 35

Menu Navigation 32

Section 4: Menu Navigation

This section explains the menu navigation for your phone. It also includes an outline of the menus available with your phone.

Menu Navigation

Access menus using the

key ( ), the navigation keys,

the two soft keys ( ), or a shortcut.

1. In standby mode, press the

key ( ). The first of

several menus appears in the display.

2. Use the navigation keys to browse phone menus.

3. Press the key to access a menu or sub-menu

highlighted in the display.

Return to the Previous Menu

Press the key or the

Back

(right) soft key ( ) to return to

the previous menu.

Navigate Using Shortcuts

You can also access menus and sub menus using menu numbers. This method is often called a “shortcut.” To shortcut to a menu or sub menu, press the

key ( ), then enter the

menu and/or sub menu number(s) for the feature in question.

1. In standby mode, press the

key ( ). The main

menu appears in the display.

2. Press the number of the menu, sub menu, and so on to

arrive at the desired feature.

Note:

For more information, refer to “Menu Outline” on page 33.

Navigation Key Shortcuts

In standby mode, press a navigation key (as illustrated below) to launch its corresponding application.

The In-Use Options

Access numerous menus and features even while in a call.

Axcess Web

Contacts (Find)

Library

Axcess Shop

Page 36

Note:

If the call is disconnected while accessing the In-Use Option, the InUse Option disappears from the display and the phone eventually returns to standby mode.

1. While in a call, press the

Options

(right) soft key ( ). The

following menu items appear in the display:

•Contacts

— The Contacts

Find

screen appears in the display.

• Call History

— View, respond to, and manage your recent

outgoing, incoming, and missed calls.

•Message

— The Messages menu appears in the display. (For

more information, refer to

“Messaging”

on page 52.)

• Connect Bluetooth

— Connects a Bluetooth device, such as a

headset, in place of the phone’s earpiece and microphone.

• Speakerphone

— Enables Speakerphone mode to share the call

with others nearby.

• Voice Memo

— Record a voice memo.

Do one of the following:

•

Use the Navigation key to highlight a menu or feature. Press the

key to open the highlighted menu or to activate the

highlighted feature.

•

Press the key to exit the menu.

Tip:

You can block sound going to the other party(ies) on this call by pressing the Mute / Unmute (left) soft key ( ). This can reduce noise on conference calls.

Menu Outline

Use the menu shortcuts on the following pages to quickly access sub menus. Press the

key ( ) to access the Main Menu,

then use the navigation keys to highlight a sub-menu.

Page 37

Entering Text 34

Section 5: Entering Text

This section outlines how to select the desired text input mode when entering characters into your phone. This section also describes how to use the T9 predictive text entry system to reduce the amount of key strokes associated with entering text.

Text Entry Modes

You can compose text messages using alphabetical characters, symbols, and numbers. Each method of character entry (symbol, number, and so on) is called a text entry mode. There are four text entry modes, as indicated:

•

Alpha

—Alphabetical text entry mode. Options are:

•ABC

— All upper case

•Abc

— Initial capital

•abc

— All lower case

•

Symbols

— Symbol entry mode. Enter symbols into your message by pressing the corresponding number that appears above it in the display.

•

123

— Number entry. Enter numbers by pressing the corresponding

key on the keypad.

•

T9 Word

— Predictive text mode. Press each key only once to enter

the letter of the word that you’re spelling.

Your current mode of text entry [

Abc, 123

, or

T9 Word

] is indicated in the lower left part of the display when composing a text message.

Changing the Text Entry Mode

1. While composing a text message, press the Left soft key

( ). A pop-up menu containing the following options

appears in the display:

• T9 Word

•Abc

•ABC

• 123

•Symbols

• Add T9 Word

Abc

is highlighted. Use the Up and Down navigation keys

to choose any of the other four text entry modes. Uses of

the text entry modes are explained in greater detail in

“Messaging” on page 52.

Entering Text in Alpha (Abc) Mode

1. Enter characters while in

Alpha

(Abc) mode by pressing the

Page 38

key with the desired characters (such as, pressing

once for “G”).

2. Press the key repeatedly until the desired character

appears in the display (such as, pressing two times

for “H”).

3. Pause briefly and the displayed character is accepted and

inserted into your message.

4. Press the key to enter a space.

Entering Text in T9 Word Mode

T9 Word

recognizes commonly used words for a sequence of keypresses and inserts the word into your message. Using T9 mode is much faster than the more traditional method Alpha mode, since T9 requires only one key press per letter of the word that you are spelling.

Note:

See “Changing the Text Entry Mode” on page 34 for instructions on changing text entry modes.

1. While in

T9 Word

mode, press each key that corresponds to

a desired letter, in sequence, one time. A list of words and/

or abbreviations pops-up at the bottom of the text entry

screen.

Example:

If you press the key sequence , the word “Bad” is likely to appear in the text entry field. In the pop-up list, “Bad”, “Ace”, and “Caf” appear.

2. When you have completed pressing all the keys for the

desired word, review the word appearing in the text entry

field and pop-up list.

3. If the word in the text entry field is not the one you meant

to enter, use the Up and Down navigation keys to highlight

the desired word in the pop-up list.

Example:

When you press the key sequence , the word “And” appears on the screen. Suppose the word you want is “cod”. Just press the Up and Down navigation keys until “Cod” is highlighted in the display.

4. Press the key to accept the highlighted word.

For practice, enter the word ‘Samsung’ into your message

by pressing each of the following keys only once:

Samsung

Page 39

Entering Text 36

T9 Word

recognizes that the most commonly used word for

the sequence of keys you just pressed is “Samsung.”

Tip:

To enter words not likely to be in the T9 Word dictionary, such as uncommon abbreviations or slang, try changing the text entry mode from T9 Word to Abc or ABC.

Adding Words to the T9 Word Dictionary

If pressing the keys corresponding to a word you want to enter and then scrolling through the pop-up list does not display that word, do the following:

1. Clear the word using the key.

2. Change the text entry mode to

Add T9 Word

Note:

See “Changing the Text Entry Mode” on page 34 for instructions on changing the text entry mode to

Add T9 Word

3. Enter the word you want to add to the T9 Word dictionary.

Note:

Add T9 Word

mode, you enter a word using the same multiple

keypress method as when in Abc text entry mode.

4. Press the

key ( ). The word is added to the T9

dictionary.

Entering Upper and Lower Case Letters

In Abc and T9 Word modes, you can select to enter only upper case letters (

ABC/T9 WORD

), only lower case letters (

abc/T9

word

), or a mix of the two (

Abc/T9 Word

1. While in

T9 Word

Abc

mode, repeatedly press the

key to change the capitalization setting.

The left soft key label changes to indicate the current

capitalization setting.

For example, if the left soft key label is

ABC

, and you want

to enter the word “BALL”, press the key until the left

soft key label changes to abc, then enter the word “ball”.

Tip:

To enter a capital letter within a word, such as “SimTam”, change the capitalization setting to Abc at the beginning of the word and before entering the “T”. The capitalization setting will automatically change to abc after you enter each upper case letter.

Entering Numbers

Enter numbers into a text message while in number mode (123).

Note:

See “Changing the Text Entry Mode” on page 34 for instructions on changing text entry modes.

Page 40

䊳

While in

123

mode, press the key containing the corresponding

number that you wish to insert into your message.

Entering Symbols

Symbol mode enables you to enter symbols such as @ or % in a text message.

1. In standby mode, press the

Message

(right) soft key ( ),

then press (for

Send Message

) and for

Tex t

Message

to compose a new text message.

2. Enter the phone number of the recipient, then press the

key.

3. Press the Left soft key ( ). A pop-up menu containing the

following options appears in the display:

• T9 Word

•Abc

•ABC

• 123

•Symbols

• Add T9 Word

4. Use the Up and Down navigation keys to highlight

Symbols

then press the key. The first of three screens of

symbols appears in the display.

5. Use the

(left) soft key ( ) and the

(right) soft

key ( ) to page through the other symbols, if necessary.

6. Press the key that corresponds with the symbol that you

wish to enter. For example, press for an exclamation

point (!).

Note:

You can also use the navigation keys to highlight the desired symbol and then press the key to enter the selected symbol into your message.

7. Repeat steps 3 through 6 to insert as many symbols into

your message as desired.

Page 41

Understanding Your Contacts 38

Section 6: Understanding Your Contacts

This section explains how to manage your daily contacts by storing their name and number in your Contacts. Contacts entries can be sorted by name.

Your Contacts List

Your Contacts list can store up to 500 entries, with each contact having up to five associated phone numbers, an email address, and a picture ID.

Each phone number can be up to 48 digits in length, including hard pauses. Contact names can be up to 32 characters in length. You can also specify a memory location for each entry, and you can restrict access to the Contacts list to prevent unauthorized use.

Tip:

One-Touch, Two-Touch, and Three-Touch Dialing allow you to call numbers stored in your Contacts list faster. (See page 21.)

Open Your Contacts List

1. In standby mode, press the

key ( ), then press

for

Contacts

. The following Contacts sub-menus and

options appear in the display:

•Find

— Find a phone number by entering a Contact name.

•Add New Contact

— Add a number or email to your Contacts.

• Speed Dial

— Assign speed dial numbers to your Contacts.

•Group

— Rename one of your five Contacts groups.

•Memory Info

— View available memory for dial entries.

2. Use the navigation keys to highlight the Contacts sub-

menu or option of your choice, and press the key.

Tip:

You can also access a sub-menu or menu option by pressing the number key corresponds to the menu item number. For example, press for

Add New Contact

Adding a New Contacts Entry

You can add an entirely new entry to your Contacts list or add information to an existing entry.

Using the Contacts Add Option

1. In standby mode, press the

key ( ), then press

(for

Contacts

) and for

Add New Contact

. The

New Contact screen appears in the display with the

Name

field highlighted.

Page 42

Enter a name or phrase to associate with the type using

the keypad. (For more information, refer to “Entering Text”

on page 34.)

3. Use the navigation keys to highlight each field.

4. Enter a phone number (

Mobile, Home

, or

Work

) or an email

address (

Email 1

) for the new Contacts entry.

5. If desired, assign the new Contact to a

Group

. This lets you

send messages to and find this Contact and other related

contacts. (For more information, refer to “Group” on

page 43.)

6. If desired, select a unique

Ringtone

to identify this new

Contact. (For more information, refer to “Ringer Type” on

page 123.)

7. If desired, enter an additional phone number (

My Circle

Fax

) or email address (

Email 2

) for the new Contacts entry.

8. If desired, select an identifying image by highlighting the

photo ID field and pressing the

Set

(left) soft key ( ). The

My Images

screen appears in the display. (For more

information, refer to “My Images” on page 93..)

9. Press the

SAVE

key ( ) to save the new Contacts entry.

Saving a Number from a Call

Once you’ve finished a call, you can save the number of the caller to your Contacts list.

Note:

If the call was incoming and Caller ID information was unavailable, then the Save option is also unavailable.

1. After you press the key to end your call, the call time,

length of call, phone number, and name of the other party

(if available) appear in the display.

2. Press the

Save

(right) soft key ( ). The

Save

screen

appears in the display showing the following options:

•Create New

— Lets you create a new Contacts entry.

• Update Existing

— Lets you add the number or email address you

just entered to an existing Contacts entry.

Tip:

You can also store a phone number from standby mode by entering the number, and pressing the Save (left) soft key ( ).

Page 43

Understanding Your Contacts 40

Creating a new Contacts entry:

3. Use the navigation keys to highlight

Create New

, then press

the key. The following (number type) icons appear in

the display:

4. Use the navigation keys to highlight the number type that

matches your new entry and press the key. The

New

Contact

screen appears in the display with the number

being save populating the selected number type field. (For

more information on creating a new Contacts entry, see

“Using the Contacts Add Option” on page 38.)

Adding the number to an existing Contacts entry:

5. Use the navigation keys to highlight

Update Existing

, then

press the key. The

Update Existing

screen appears in

the display showing your current Contacts list.

6. Enter the first few characters of the Contacts entry name

under which you will store the saved number. (For more

information on finding a Contacts entry, see “Using the

Contacts Add Option” on page 38.)

7. Use the Up and Down navigation keys to highlight the

desired Contacts entry, then press the key. The

following (number type) icons appear in the

Update Existing

screen:

8. Use the Up and Down navigation keys to highlight the

appropriate unassigned number type, then press the

key. The

Edit Contact

screen appears in the display.

9. Make any added changes you wish to the Contacts entry.

(For more information, refer to “Editing an Existing Contact

Entry” on page 44.)

10. Press the

SAVE

key ( ) to save the entry.

Mobile My Circle Home

Work

Fax

Mobile My Circle Home

Work

Fax

Page 44

Storing Number from a Calls Log

You can store numbers from the Calls logs to your Contacts.

1. In standby mode, press the

key ( ), then press

for

Calls

2. Press the corresponding number on the keypad to view the

following Calls logs:

•

Press for

Outgoing Calls

•

Press

for

Incoming Calls

•

Press for

Missed Calls

•

Press for

All Calls

•

Press for

Data Call

A list of your calls appears in the display.

3. Use the navigation keys to highlight the number you wish

to store in

Contacts

4. Press the

Options

(right) soft key ( ). The following

options appear in the display:

•Save

— Saves the selected number to your Contacts list.

• Details

— Calls to/from Contacts Only — Shows the entry for the

called Contact.

•Erase

— Deletes the selected number from the selected Calls log.

•Lock / Unlock

— Prevents/allows deletion of the selected number.

•Erase All

— Deletes all numbers from the selected Calls log.

•View Timer

— Shows the call times for the Last Call, All Calls, Incoming Calls, Outgoing Calls, Roaming Calls, Last Reset, and Lifetime Calls timers for the selected Calls log.

5. Use the navigation keys to highlight

Save

, then press the

key. The following options appear in the display:

•Create New

— Lets you create a new Contacts entry.

• Update Existing

— Lets you add the number or email address you

just entered to an existing Contacts entry.

For more information on saving the number, see “Saving a

Number from a Call” on page 39.

Finding a Contacts Entry

Voice Method

Use the VoiceSignal

Contacts

command to view contact information for any named contact stored in your Contacts list by saying the name.

Note:

The Contacts command shows the requested contact information in the display but does not dial any phone numbers for the contact.

To look up information for a specific contact:

1. In standby mode, press and hold the

for

Voice

Page 45

Understanding Your Contacts 42

Service

“

Say a Command

” appears in the display and is

pronounced through the speaker.

2. Say “

Lookup

”.

VoiceSignal prompts you to “

Say the name or #

.”

3. Speak clearly and say the full name of the person you want

to call, exactly as it is entered in your contact list.

•

If VoiceSignal recognizes the name you said, the contact information for that name appears in the display.

•

If VoiceSignal does not recognize the name you said, a choice list of up to three names appears in the display, and VoiceSignal prompts you with “

Did you say?

” followed by the first name on the list.

4. Say “

Ye s

” to confirm the name or “No” to hear the next

name, or use the keypad to select the correct name from

the list. (For more information, refer to “Choice Lists” on

page 104.)

•

To say the name again, press the

Repeat

(right) soft ( ) key.

•

To exit VoiceSignal without dialing, press the

Settings

(left) soft

( ) key, then press the

Exit

(right) soft ( ).

5. The contact information for the name you selected appears

in the display.

Keypad Methods

Find by Name

If you have stored a named contact in your Contacts list, Find lets you locate the entry quickly.

1. In standby mode, do one of the following:

•

Press the

Down

navigation key (Contacts Find shortcut).

•

Press the

key ( ), then press (for

Contacts

) and

for

Find

The

FIND

screen appears in the display with an

alphabetical list of Contacts showing.

2. Enter the first few characters of the name of the contact as

it appears in your Contacts list.

Example:

If you saved a contact name as “Amy Smith”, begin your search for that contact by pressing for “A”.

Note:

As you enter letters, the entry names of the closest matches (thus far) appear in the display.

3. When the desired Contacts entry is listed in the display,

highlight the contact using the navigation keys (if

necessary). Then, do one of the following

Page 46

•

Press the key to dial the number associated with the named contact.

•

Press the

Edit

(left) soft key ( ) to change the information about

the contact.

•

Press the

VIEW

key to show information about the contact.

•

Press the

Options

(right) soft key ( ). The following options

appear in the display:

–

New Contact

— Lets you add a new number to your Contacts list or to

the selected contact.

–

Erase

— Lets you delete the highlighted contact.

–

Send Message

— Lets you send a text, picture, or video message to

the selected contact.

–

Call

— Lets you place a call to the highlighted contact.

–

Send Name Card With Bluetooth

— Lets you send a Name Card containing the selected Contact’s information to another Bluetooth device.

–

Set as/Remove Speed Dial

— Lets you assign a speed dial number to a contact. You can select the number by either entering it into the Go To box or using the navigation keys, then press the key to set the number.

Group

This option lets you find a Contacts list entry with a specific Group name.

1. In standby mode, press the

key ( ), then press

(for

Contacts

) and for

Group

. The

Group List

screen appears in the display.

2. Use the Up and Down navigation keys to highlight the

name of the group you wish to browse, then press the

key. The selected Group list appears in the display.

3. Use the Up and Down navigation keys to find the desired

Contacts entry.

4. When the desired Contacts entry is listed in the display,

highlight the Contact using the Up and Down navigation

keys (if necessary). Then, do one of the following:

•

Press the

Remove

(left) soft key ( ) to delete the selected contact

from the Group. (Does not apply to the General group.)

•

Press the key to

ADD

an existing contact entry to the selected

Group. (Does not apply to the General group.)

•

Press the

Options

(right) soft key ( ) to send a text, picture, or

video message

to selected contact(s) in the current group.

5. Use the Up and Down navigation keys to highlight an

option, then press the key to enter that option’s sub-

menu.

Search by Number

This option lets you find a Contacts list entry by one of its phone numbers.

Page 47

Understanding Your Contacts 44

In standby mode, enter the first few numbers of the

Contacts list entry you wish to find (such as the area code

or area code and exchange — for example, 888-987).

2. Press the

Options

(right) soft key ( ). The following menu

options appear in the display:

•Search

— Lets you find Contacts list entries by their phone

numbers.

• P pause

— Adds a hard pause (awaits input from you).

• T pause

— Adds a two-second pause.

• Send Message

— Lets you send a text, picture, or video message

to the entered number.

3. Use the navigation keys to highlight the

option, then

press the key. The

FIND

screen appears in the display

listing all phone numbers in your Contacts list that contain

the entered digits.

4. Use the navigation keys (if necessary) to highlight the

desired Contacts entry. Then do one of the following:

•

Press the key to dial the highlighted number.

•

Press the

VIEW

key ( ) to display information about the

Contacts entry associated with the highlighted number. From the

View Contact

screen, you can erase or edit the selected Contacts

entry.

Editing an Existing Contact Entry

Once stored in the Contacts, an entry can be changed quite easily.

1. Find the desired entry in the Contacts list. (For more

information, refer to “Finding a Contacts Entry” on

page 41.)

2. Press the

Edit

(left) soft key ( ). The

Edit Contact

screen

appears in the display with the contact name highlighted.

3. Use the navigation keys to highlight a number stored in

this contact entry.

4. Press to backspace and delete numbers.

5. Press and hold to clear all numbers in the highlighted

field.

Note:

You can also add numbers (such as a My Circle number or a Fax number) to the entry, assign it to a Group, and add other information.

6. When you’re finished editing the entry, press the key.

Your changes are saved and a confirmation message

appears in the display.

Page 48

Adding Pauses to Contacts Numbers

•

P pause

— A hard pause stops the calling sequence until further input

from you.

•

T pause

— A two-second pause stops the calling sequence for two

seconds and then automatically sends the remaining digits.

Tip:

You can enter multiple two-second pauses to extend the length of a pause. For example, two consecutive two-second pauses cause a total pause time of four seconds.

Note:

Keep in mind that pauses count as digits towards the 48-digit maximum.

Store Pauses in a New Contacts Entry

1. In standby mode, enter the number you wish to store (such

as your bank’s teleservice number).

2. Press the

Options

(right) soft key ( ). The following menu

options appear in the display:

•Search

— Lets you find Contacts list entries by their phone

numbers.

• P pause

— Adds a hard pause (awaits input from you).

• T pause

— Adds a two-second pause.

• Send Message

— Lets you send a text, picture, or video message

to the entered number.

3. Use the navigation keys to highlight the pause option of

your choice.

4. Press the key to enter the highlighted pause into your

number sequence.

5. When you’re finished entering the number and pauses,

press the

Save

(left) soft key ( ) to store the number in

your

Contacts

Add Pauses to an Existing Contacts Entry

1. Find the desired entry in the Contacts list. (For more

information, refer to “Finding a Contacts Entry” on

page 41.)

2. Press the

Edit

(left) soft key ( ). The

Edit Contact

screen

appears in the display with the contact name highlighted.

3. Use the navigation keys to highlight a number stored in

this contact entry.

Page 49

Understanding Your Contacts 46

Use the navigation keys to place the cursor where you

want to add a pause (usually at the right-hand end of the

number).

5. Press the

Options

(right) soft key ( ). The following menu

options appear in the display:

• Set as/Remove Speed Dial

— lets you assign a Speed Dial

number to this Contacts entry.

•Set As Default

— your phone automatically dials this number

when you find this Contacts entry and press the key.

•Set as/Remove My Circle

— lets you add the contact to/remove

the contact from your My Circle group.

•T pause

— a two-second pause.

• P pause

— a hard pause (awaits input from you).

6. Use the navigation keys to highlight the pause option of

your choice.

7. Press the key to enter the highlighted pause into your

number sequence.

8. When you’re finished entering pauses, press the key

to save your changes to the number in your

Contacts

Assigning Speed Dial Numbers

When you add or edit an entry to the Contacts list, you have the option of assigning a Speed Dial number using the Options popup menu or of returning to the Contacts menu and using the Speed Dial option. You can also change a contact’s Speed Dial number.

1. Find the desired entry in the Contacts list. (For more

information, refer to “Finding a Contacts Entry” on

page 41.)

2. Do one of the following:

Using the Options (right) soft key

3. Press the

Options

(right) soft key ( ). The following menu

options appear in the display:

–

New Contact

— Lets you add a new number to your Contacts list or to

the selected contact.

–

Erase

— Lets you delete the highlighted contact.

–

Send Message

— Lets you send a text, picture, or video message to

the selected contact.

–

Call

— Lets you place a call to the highlighted contact.

–

Send Name Card With Bluetooth

— Lets you send a Name Card containing the selected Contact’s information to another Bluetooth device.

Page 50

–

Set as/Remove Speed Dial

— Lets you assign a speed dial number to a contact. You can select the number by either entering it into the Go To box or using the navigation keys, then press the key to set the number.

4. Use the navigation keys or enter the number to select

Set

as/Remove Speed Dial

. The

Speed Dial

menu appears in the

display.

5. Enter, or use the navigation keys to select, an unassigned

Speed Dial number.

6. Press the key to assign the new Speed Dial number to

the selected Contact. You are prompted to confirm the

assignment.

7. Press the

Ye s

(left) soft key ( ) to assign the selected

Speed Dial number.

Using the Edit (left) soft key

8. Press the

Edit

(left) soft key ( ). The

Edit Contact

screen

appears in the display with the contact name highlighted.

9. Use the navigation keys to highlight a number stored in

this contact entry.

Note:

If a contact has more than one stored number (such as Home and Office), you can select which of these numbers your phone will dial when you speed dial that contact.

10. Press the

Options

(right) soft key ( ). The following menu

options appear in the display:

• Set as/Remove Speed Dial

— lets you assign or remove a Speed

Dial number for this Contacts entry.

•Set As Default

— your phone automatically dials this number

when you Find this Contacts entry and press the key.

•Set as/Remove My Circle

— lets you add the contact to/remove

the contact from your My Circle group.

• T pause

— a two-second pause.

• P pause

— a hard pause (awaits input from you).

Set as/Remove Speed Dial

is highlighted.

11. Press the key. The

Speed Dials

screen appears in the

display. (If a speed dial number has been set previously,

you can remove it by pressing the key. If none has

been set, continue with the next step.)

12. Enter, or use the navigation keys to select, an unassigned

Speed Dial number.

Page 51

Understanding Your Contacts 48

13.

Press the key to assign the new Speed Dial number to

the selected Contact. You are prompted to confirm the

assignment.

14. Press the

Ye s

(left) soft key ( ) to assign the selected

Speed Dial number. The

Edit Contact

screen appears in the

display.

15. Press the key to save the new Speed Dial number

assignment.

Add a Number or Email Address to an Existing Entry

1. Find the desired entry in the Contacts list. (For more

information, refer to “Finding a Contacts Entry” on

page 41.)

2. Press the

Edit

(left) soft key ( ). The

Edit Contact

screen

appears in the display with the contact name highlighted.

3. Use the navigation keys to highlight a number field or

Email field in this contact entry.

4. Enter the phone number or email address for the new

Contacts entry.

5. Press the key to add the number or email address to

the existing entry.

Edit an Existing Email Address

1. Find the desired entry in the

Contacts

list. (For more

information, refer to “Finding a Contacts Entry” on

page 41.)

2. Press the

Edit

(left) soft key ( ). The

Edit Contact

screen

appears in the display with the contact name highlighted.

3. Use the navigation keys to highlight the

Email 1

Email 2

field (labeled with the @ symbol).

4. Use the keypad to edit the

address. (For more

information, refer to “Entering Text” on page 34.)

•

To insert the @ symbol, do the following:

–

Press the

abc

(left) soft key ( ). A pop-up menu appears in the

display with

Abc

highlighted.

–

Use the navigation keys to highlight

Shortcuts

, then press the

key.

–

Highlight the @ symbol, and press the key.

–

Enter the remainder of the email address using the keypad. (For more information, refer to

“Entering Text”

on page 34.)

•

To add the domain type to the end of the email address, do the following:

–

Press the

abc

(left) soft key ( ). A pop-up menu appears in the

display with

Abc

highlighted.

Page 52

–

Use the navigation keys to highlight

Shortcuts

, then press the

key.

–

Use the navigation keys to highlight the desired domain type (such as, .com, .net, or .edu), then press the key.

5. Press the key to save your changes.

Speed Dial Numbers

You can assign and change Speed Dial numbers for Contacts entries.

1. In standby mode, press the

key ( ), then press

(for

Contacts

) and for

Speed Dial

. The

Speed

Dial

list appears in the display.

Tip:

You can also assign a Speed Dial number when creating or editing a Contacts entry. For more information, refer to “Assigning Speed Dial Numbers” on page 46.

2. Enter a Speed Dial number in the

Go To

field or use the

navigation keys to highlight a Speed Dial number.

3. Press the

SET

( ) key. The

Set Speed Dial

screen

appears in the display.

4. Enter a Contact name or use the navigation keys to

highlight a Contact entry.

5. Press the key. You are prompted to confirm the new

Speed Dial setting.

6. Press the

Ye s

(left) soft key ( ) to save the new setting.

Press the No (right) soft key ( ) to discard the new

setting.

Renaming a Contacts Group

Use this option to rename a group in your Contacts list.

1. In standby mode, press the

key ( ), then press

(for

Contacts

) and for

Group

. A list of group

names (like the following list) appears in the display:

•General

•Family

• Friends

• Colleagues

•Business

2. Use the navigation keys to highlight the group (other than

General

) that you wish to rename, then press the

Options

(right) soft key ( ). The following options appear in the

display:

• Send Message

— Lets you send a text, picture, or video message

to all contacts in the selected Group.

Page 53

Understanding Your Contacts 50

•Rename

— Lets you change the name of the selected Group.

•Erase

— Lets you delete the selected Group (this does not delete

the related Contacts).

•Add

— Lets you add a new Group.

3. Use the navigation keys to highlight

Rename

, then press

the key.

4. The

Rename Group

screen appears in the display. The

current name of the selected group shows with a flashing

cursor at the end of the name.

5. Enter a new group name using the keypad. (For more

information, refer to “Entering Text” on page 34.)

6. Press the key to save the changed group name.

Deleting a Contacts Entry

1. Find the desired entry in the Contacts list. (For more

information, refer to “Finding a Contacts Entry” on

page 41.)

2. Press the

Options

(right) soft key ( ). A pop-up menu

containing the following options appears in the display:

•New Contact

— Lets you add an entry to your Contacts list.

•Erase

— Erases the selected Contact.

• Send Message

— Lets you send a text, picture, or video message

to the selected contact.

•Call

— Calls the highlighted Contact.

• Send Name Card With Bluetooth

— Send one or more Contacts entries to another, compatible Bluetooth device. (For more information, refer to

“Bluetooth”

on page 107.)

• Set as/Remove Speed Dial

— Lets you assign a Speed Dial

number to this Contacts entry.

3. Use the navigation keys to highlight

Erase

4. Press the key. The phone prompts you to confirm the

erasure.

5. Press the

Ye s

(left) soft key ( ) or the No (right) soft key

().

Sending a Contacts Entry

Use the Send Name Card With Bluetooth option to send one or more selected Contacts entries to another, compatible phone or other device over a Bluetooth connection.

1. In standby mode, press the Down navigation key. The

Find

screen appears in the display with a Contacts entry

highlighted.

Page 54

Press the

Options

(right) soft key ( ), then select the

Send

Name Card With Bluetooth

option. The

Send with Bluetooth

screen appears in the display with the highlighted Contacts

entry marked.

3. Use the Up and Down navigation keys to highlight Contacts

entries you wish to send and press the

MARK

key ( ) to

mark these entries for sending.

4. Press the

Done

(left) soft key ( ). The Choose device

screen appears in the display.

5. Use the Up and Down navigation keys to highlight the

name of the receiving device, then press the key. Your

phone automatically connects with the other device and

sends the selected Contact entries.

Note:

For information on turning off the Bluetooth connection, see “Bluetooth” on page 107..

Memory Info

Use the Memory sub-menu to view the amount of Contacts entries you have stored, as well as the remaining memory.

䊳

In standby mode, press the

key ( ), then press

(for

Contacts

) and for

Memory Info

. The amounts of

memory used and remaining for Contacts entries appear in the

display.

Page 55

Messaging 52

Section 7: Messaging

This section explains how to create, send, receive, and view different types of messages. This section also describes the features and functionality associated with messaging.

Creating and Sending New Messages

This section guides you through procedures for creating and sending text messages, picture messages, and video messages.

Creating and Sending a Text Message

1. In standby mode, press the

Message

(right) soft key ( ),

then press (for

Send Message

) and for

Text

Message

. The

Create Text Msg

screen appears in the

display showing the

Send To

list.

Tip:

You can also access Messages by pressing the

key ( ), and then

press for Messages.

2. Address your message by selecting contacts and/or

entering number(s) or email address(es) of message

recipient(s):

•

To select a mobile number or email address using your Contacts list, press the

Add

(right) soft key ( ). The following options

appear in the display:

–

Contacts

–

Groups

–

Recent Calls

The

Contacts

option is highlighted.

Press the key. The

Add Contacts

screen appears in the

display. For more information, refer to

“Finding a Contacts

Entry”

on page 41.

Use the Up and Down navigation keys to highlight a contact. Use the Left and Right navigation keys to select a phone Number or Email address for the highlighted Contact. Press the key to mark your selection.

To add the selected contacts to the

Send To

list, press the

Done

(left) soft key ( ). The

Create Text Msg

screen appears in the

display.

•

To enter recipient email address(es), press and hold the key to change the text entry mode from

123

T9 word

abc

. (For

more information, refer to

“Add a Number or Email Address

to an Existing Entry”

on page 48.)

3. When you are finished addressing your message, press the

key. The Text field appears in the display.

4. Enter the text for your message using the keypad. (For

more information, refer to “Entering Text” on page 34.)

•

To change the text input method, do one of the following:

Page 56

–

Repeatedly press and hold the key until the desired text input method is indicated by the left soft key label.

–

Press the Left soft key ( ), use the navigation keys to select the desired text input method, and press .

•

Press the Left soft key ( ) to select one of the following text entry methods:

–

T9 Word

–

Abc

–

ABC

–

123

–

Symbols

–

Add T9 Word

5. At any point while composing a message, you can set

message send options by pressing the

Options

(right) soft

key ( ). (For more information, refer to “Message Send

Options” on page 56.)

6. Once you’re finished composing your message, press the

SEND

soft key ( ) to send your message.

Creating and Sending a Picture Message

1.In standby mode, press the

Message

(right) soft key ( ),

then press (for

Send Message

) and for

Picture

Message

. The

Create PIC Msg

screen appears in the display

with the

Send To

field highlighted.

Tip:

You can also access Messages by pressing the

key ( ), and

then press for Messages.

2. Address your message by selecting contacts and/or

entering number(s) or email address(es) of message

recipient(s).

For more information, refer to

“Creating and Sending a Text

Message” on page 52. See Step 2.

3. After addressing your picture message, the

Subject

field

becomes highlighted.

4. Enter the Subject text using the keypad.

(See Step 4 of “

Creating and Sending a Text Message

” on page 52 for more information on choosing a text entry method, also see “

Entering Text

” on page 34 for more information on using

text entry methods.)

5. Press the

Down

navigation key. The

Tex t

field becomes

highlighted.

6. Enter the message text using the keypad.

(See Step 4 of “

Creating and Sending a Text Message

” on page 52 for more information on choosing a text entry method, also

Page 57

Messaging 54

see “Entering Text” on page 34 for more information on using text entry methods.)

7. To set message send options, press the

Options

(right) soft

key ( ). (For more information, refer to “Message Send

Options” on page 56.)

8. To add a picture to the message, use the navigation keys

to highlight the

PIC

field.

•

Press the

My PIC

(left) soft key ( ) to access the picture gallery. If

there are no pictures in the gallery, press the

Camera

(right) soft key ( ) to launch the camera, then take a picture. If there are pictures in the gallery, thumbnail pictures appear in the display. Then, do the following:

–

Use the navigation keys to highlight a picture in the gallery.

–

Press the

View

(left) soft key ( ) to expand the highlighted picture to

fill the display.

–

Press the

Camera

(right) soft key ( ) to activate the phone’s camera

and take a new picture. (For more information, refer to

“Camera-

Camcorder”

on page 69.)

•

Press the

Options

(right) soft key ( ). (For more information, refer

“Message Send Options”

on page 56.)

9. Once you have selected a photo, press the key. The

Create Pic Msg

screen appears in the display with the

selected photo in the

PIC

field.

The

Sound

field becomes highlighted.

10. Press the

Sounds

(left) soft key ( ). The

Record New

option and a list of sound files appear in the display with

the

Record New

option highlighted.

11. Press the key to record a new sound file, or use the

navigation keys to select a listed sound file.

•

If you select the Record New option, the Record New screen appears in the display. Press the

REC

( ) key to begin recording.

•

Wait for the beep, then start speaking. As it is recording the phone displays a countdown timer that shows the seconds remaining for the recording.

–

To pause the memo, press the

Pause

(left) soft key ( ). When a

memo is paused, press the

Resume

(left) soft key ( ) to continue

recording.

•

Press the

SAVE

( ) key to stop recording. The

Record New

option and a list of sound files appear in the display with the

Record

New

option highlighted.

•

Use the navigation keys to highlight your new sound file and press the key. The

Create Pic Msg

screen appears in the display

with your selected sound file in the

Sound

field.

12. Once you’re finished composing your picture message, do

one of the following:

•

Press the key to SEND the message.

•

Press the

Options

(right) soft key ( ). For more information, refer

“Message Send Options”

on page 56.

Page 58

Creating and Sending a Video Message

1. In standby mode, press the

Message

(right) soft key ( ),

then press (for

Send Message

) and for

Video

Message

. The

Create Video Msg

screen appears in the

display with the

Send To

field highlighted.

Tip:

You can also access Messages by pressing the MENU key ( ), and then press for Messages.

2. Address your message by selecting contacts and/or

entering number(s) or email address(es) of message

recipient(s), and press the OK key ( ).

(See Step 2 of “Creating and Sending a Text Message” on

page 52 for more information on addressing your

message.)

3. After addressing your picture message, the

Subject

field

becomes highlighted.

4. Enter the Subject text using the keypad.

(See Step 4 of “Creating and Sending a Text Message” on

page 52 for more information on choosing a text entry

method, also see “Entering Text” on page 34 for more

information on using text entry methods.)

5. Press the Down navigation key. The

Text

field becomes

highlighted.

6. Enter the message text using the keypad.

(See Step 4 of “Creating and Sending a Text Message” on

page 52 for more information on choosing a text entry

method, also see “Entering Text” on page 34 for more

information on using text entry methods.)

7. To set message send options, press the

Options

(right) soft

key ( ). (For more information, refer to “Message Send

Options” on page 56.)

8. To add a video to the message, use the navigation keys to

highlight the

Video

field.

•

Press the

My Video

(left) soft key ( ) to access the video gallery. If

there are no videos in the gallery, press the

Video

(right) soft key ( ) to launch the camcorder, then take a video. If there are videos in the gallery, thumbnail videos appear in the display. Then, do the following:

Page 59

Messaging 56

–

Use the navigation keys to highlight a video in the gallery.

–

Press the

Play

(left) soft key ( ) to expand and review the video.

–

Press the

Video

(right) soft key ( ) to activate the phone’s camcorder

and take a new video. (For more information, refer to

“Camera-

Camcorder”

on page 69.)

•

Press the

Options

(right) soft key ( ). (For more information, refer

“Message Send Options”

on page 56.)

9. Once you have selected a video, press the key. The

Create Video Msg

screen appears in the display with the

selected video in the

Video

field. The

Video

field is

highlighted.

10. Once you’re finished composing your video message, do

one of the following:

•

Press the key to SEND the message.

•

Press the

Options

(right) soft key ( ). (For more information, refer

“Message Send Options”

on page 56.)

Message Send Options

You can set priority, validity, and other options before you send a message.

1. After you’ve composed a text, picture, or video message,

press the

Options

(right) soft key ( ). The following are

Send Options that can appear in the display (which options

appear depends on what type of message you composed

and what message field you have highlighted):

• Edit Send To

— Lets you add, delete, or change numbers or Email

addresses in a Text message

Send To:

list.

•Preview

— Lets you view a Picture or Video message as the

recipient will see it.

•Add

— Lets you add

Graphics, Animations, Sounds

, or

Quick

Tex t

to a Text message.

• Add Quick Text

— Lets you add

Quick Text

to a Picture or Video

message.

•Edit Text Format

— Lets you select text Size, Alignment, Color,

Style, and Background in a Text message.

•Save As Draft

— Saves this message in the Drafts folder.

• Priority Level

— Lets you assign a

High

Normal

priority to the

message.

• Validity Period

— Lets you set a

Date

and

Time

when this message will no longer be available to the recipient. After the set period of time, your message is recalled.

• Deferred Delivery

— Lets you set a

Date

and

Time

when this

message will be delivered.

• Enh. Delivery Ack / Deliver Ack

— Set to On to be alerted when

your message is received by the addressee.

•Remove PIC

— Removes the picture from a Picture message.

Page 60

• Remove Sound

— Removes the sound file from a Picture

message.

•Remove Video

— Removes the video from a Video message.

• Add To Contacts

— Lets you add the addressee numbers or Email

addresses to your Contacts list.

2. Use the navigation keys to display the various

Send Options

for each menu item.

3. When the desired send option is highlighted, press the

key to confirm the selection or to enter the send

option’s sub-menu.

Receiving New Messages

When you receive a message in standby mode, an alert sounds (unless turned off) and a

New Message

notification appears in the display along with the closed envelope icon ( ). The date and time of the message and the following options also appear in the display:

•

View Now

— Opens the message where you have the option to Reply,

Forward, Erase, Save Text, Save Contact, Lock/Unlock, or Save Media.

•

View Later

— Closes the popup and saves the message to your inbox

where you can view it later.

Use the navigation keys to highlight the desired option and press the key.

Receive Messages While in a Call

When you receive a message while in a call, a

New Message

notification appears in the display along with the closed envelope icon ( ). The date and time of the message and the following options also appear in the display:

•

View Now

— Opens the message where you have the option to Reply,

Forward, Erase, Save Text, Save Contact, Lock/Unlock, or Save Media.

•

View Later

— Closes the popup and saves the message to your inbox

where you can view it later.

Use the navigation keys to highlight the desired option and press the key.

Voicemail

Voicemail allows callers to leave voice messages in your voice mailbox, and lets you review, play, and delete your voice messages any time you are in your Carrier’s network coverage area.

Voice Mail Setup

Before callers can leave voice mail messages, you must first set up your account. See “Setting Up Your Voice Mail” on page 7 and General Message Settings for more information.

Checking your Voicemail

1. In standby mode, press and hold the key until you’re

Page 61

Messaging 58

connected to the voice mail system. A recorded message

prompts you for a password.

2. Enter your password, then follow the recorded prompts, to

listen to your voice message, change administrative

options, and so on.

Tip:

You can also access your Voicemail by using the entries in the Voicemail folder. For more information, refer to “Voicemail” on page 57.

Message Folders

Inbox

Received messages of all types (except Voice Mail) are stored in the Inbox.

1. In standby mode, press the

Message

(right) soft key ( ),

then press for

Inbox

, to open the Inbox folder.

2. Use the navigation keys to highlight a message, then do

one of the following:

•

Press the

Erase

(left) soft key ( ) to delete the message.

•

Press the

OPEN

( ) key to view the highlighted message, then

proceed to Step 3.

•

Press the

Options

(right) soft key ( ). The following options

appear in the display:

–

— Lets you compose and send a message to the sender.

–

Reply With Copy

— Text Message only — Lets you reply to a

message and include a copy of the original message.

–

Forward

— Lets you forward the message to other Email addresses or

mobile phone numbers.

–

Lock / Unlock

— Blocks or allows erasure of the selected message.

–

Add To Contacts

— Lets you add the addressee numbers or Email

addresses to your Contacts list.

–

Erase Inbox

— Deletes selected/all unlocked messages from the

Inbox folder.

–

Message Info

— Lets you display status information about a

message.

Use the navigation keys to highlight an option. Press the key to perform the function for the highlighted option.

•

Press the key to return to the

Messages

menu.

3. While viewing a selected message, do one of the following:

•

Press the

Erase

(left) soft key ( ) to delete the message.

•

Press the

( ) key to compose and send a message to

the sender of the highlighted message.

•

Press the

Options

(right) soft key ( ), The following options

appear in the display:

–

Play Again

— Picture/Video Messages only — Replay a sound/video

file included with a message.

–

Forward

— Lets you forward the message to other Email addresses or

mobile phone numbers.

Page 62

–

Go To URL

— Lets you browse any Internet address included in the

message.

–

Reply With Copy

— Text Message only — Lets you reply to a

message and include a copy of the original message.

–

Save PIC

— Picture Messages only — Saves a copy of the image

included in the selected message to the My Images gallery.

–

Save Sound

— Picture Messages only — Saves the sound file in the

message to the My Sounds gallery.

–

Save Video

— Video Messages only — Saves the video file in the

message to the My Videos gallery.

–

Save Quick Text

— Saves the message text as a Quick Text entry.

–

Lock / Unlock

— Block or allow changes to the selected message.

–

Add To Contacts

— Lets you add the addressee numbers or Email

addresses to your Contacts list.

–

Callback

— Lets you call the originator of the message.

–

Message Info

— Lets you display status information about a

message.

Use the navigation keys to highlight an option. Press the key to perform the function for the highlighted option.

•

Press the key to return to the

Inbox

list.

Messages and Lock Mode

Your phone can still receive messages while in Lock Mode. The time and date of the message appear in the display, but you cannot access the message until you enter the lock code. (For more information, refer to “Lock Phone” on page 128.)

Outbox

Your phone stores outgoing messages in the Outbox, regardless of whether the message was successfully sent to, or received by, the addressee.

Tip:

Verify whether and when a message or email was successfully received by enabling the Delivery Ack message send option. (For more information, refer to “Message Send Options” on page 56.)

1. In standby mode, press the

Message

(right) soft key ( ),

then press for

Outbox

. A list of your outgoing

messages appears in the display.

2. Use the navigation keys to highlight a message, then do

one of the following:

•

Press the

Erase

(left) soft key ( ) to delete the message.

•

Press the

OPEN

( ) key to view the highlighted message, then

proceed to Step 3.

•

Press the

Options

(right) soft key ( ). The following options

appear in the display:

–

Forward

— Send the message to another addressee.

–

Resend

— Re-send the message.

–

Lock / Unlock

— Block a message from being erased or free a

message to be erased.

Page 63

Messaging 60

–

Add To Contacts

— Lets you add the addressee numbers or Email

addresses to your Contacts list.

–

Erase Outbox

— Erase all messages in the Outbox folder.

–

Message Info

— Lets you display status information about picture

messages.

Use the navigation keys to highlight an option. Press the key to perform the function for the highlighted option.

•

Press the key to return to the

Messages

menu.

3. While viewing a selected message, do one of the following:

•

Press the

Erase

(left) soft key ( ) to delete the message.

•

Press the

RESEND

( ) key to resend a message to the original

addressee.

•

Press the

Options

(right) soft key ( ), The following options

appear in the display:

–

Go To URL

— Go to a URL included in this message.

–

Play Again

— Picture Messages only — Replay a sound file included

with a message.

–

Forward

— Send the message to another addressee.

–

Lock / Unlock

— Block a message from being erased or free a

message to be erased.

–

Save Quick Text

— Save the message text in the Quick Text folder.

–

Add To Contacts

— Lets you add the addressee numbers or Email

addresses to your Contacts list.

–

Call

— Lets you call the recipient of the message.

–

Message Info

— Lets you display status information about picture

messages.

Use the navigation keys to highlight an option. Press the key to perform the function for the highlighted option.

•

Press the key to return to the

Outbox

list.

Drafts Folder

Messages in the Drafts folder are those that have been composed but never sent. You can return to the Drafts folder at any time to view, edit, or send a draft message.

1. In standby mode, press the

Message

(right) soft key ( ),

then press for

Drafts

. A list of your draft messages

appears in the display.

2. Use the navigation keys to highlight the message that you

wish to edit, then do one of the following:

•

Press the

Erase

(left) soft key ( ) to delete the message.

•

Press the

EDIT

key ( ) to view the highlighted message, then

proceed to One of the following screens:

–

Text Message — Create Text Msg

screen showing the

Tex t

field

appears in the display.

–

Picture Messag

e —

Create Pic Msg

screen showing the

Send To

list appears in the display. Change or add numbers and addresses, then press the key.

Page 64

–

Video Message

—

Create Video Msg

screen showing the

Send To

list appears in the display. Change or add numbers and addresses, then press the key.

Proceed to Step 3.

•

Press the

Options

(right) soft key ( ). The following options

appear in the display:

–

Send

— Send the message to the current addressee(s).

–

Lock/Unlock

— Block a message from being erased or free a

message to be erased.

–

Add To Contacts

— Lets you add the addressee numbers or Email

addresses to your Contacts list.

–

Save Quick Text

— Save the message text in the Quick Text folder.

–

Erase Drafts

— Erase all messages in the Drafts folder.

Use the navigation keys to highlight an option. Press the key to perform the function for the highlighted option.

•

Press the key to return to the

Messages

menu.

3. If you press the

EDIT

key ( ), in the

Tex t

screen/field, do

one of the following:

•

Press the

Abc

(left) soft key ( ). The following options appear in

the display:

–

T9 Word

— Predictive, single key press per letter text entry mode.

–

Abc

— Alphabetical, multiple key press text entry mode. The first letter

is capitalized.

–

ABC

— Alphabetical, multiple key press text entry mode. All letters are

capitalized.

–

123

— Enter numbers by pressing the corresponding key on the

keypad.

–

Symbols

— Enter symbols into your message by pressing the

corresponding number that appears above it in the display.

–

Add T9 Word

— Enter word to be added to the T9 Word dictionary.

Use the navigation keys to highlight the desired option. Press the key to perform the function for the highlighted

option.

•

Press the

SEND

soft key ( ) to send the message.

•

Press the

Options

(right) soft key ( ). (For more information, refer

“Message Send Options”

on page 56.)

4. Once you’re finished composing your message, do one of

the following:

•

Press the

SEND

soft key ( ) to send your message.

•

Press the key to exit the message. You are prompted to save your changed message to the Drafts folder.

Voicemail

New voice messages in your voice mailbox are logged in the Voicemail folder of the Messages menu. Open the Voicemail folder to view the Callback # (if available), Urgency, and other details of new voicemail messages.

1. In standby mode, press the

Message

(right) soft key ( ),

then press for

Voicemail

. A Voicemail status screen

indicating the number of new messages in your voice

Page 65

Messaging 62

mailbox, their urgency, and any callback numbers appears

in the display.

2. Press the key to call your voice mailbox and listen to

your voice messages.

Note:

You can, in standby mode, also press and hold the key to dial your

voice mailbox.

Erasing Messages

You can erase all of the messages in each/all of your message folders from one convenient location.

Note:

This function erases all messages in a selected message folder or in all

message folders. To delete a single message, from the Messages menu, open the message folder where the message to be deleted is stored, then select and delete the message from the Option menu while viewing the message content.

1. In standby mode, press the

Message

(right) soft key ( ),

then press for

Erase Messages

. The following

options appear in the display:

• Inbox

— Lets you delete all messages from your Inbox.

• Outbox

— Lets you delete all messages from your Outbox.

• Drafts

— Lets you delete all draft messages from the Drafts folder.

•All Messages

— Lets you delete all messages from all message

folders.

2. Use the navigation keys to highlight the folder containing

the messages that you wish to delete.

3. Press the key to select the highlighted folder. You are

prompted to confirm the erasure of all messages in the

folder.

4. Press the

(right) soft key ( ) to cancel deleting any

messages, or press the

Ye s

(left) soft key ( ) to delete all

messages from the selected folder.

Message Settings

The Msg Settings folder lets you define numerous message settings such as ringer types and save options.

1. In standby mode, press the

Message

(right) soft key ( ),

then press for

Msg Settings

. The following

Msg

Settings

options appear in the display:

•General

— Lets you set default option values for Text, Picture, and

Voice messages.

•Text Message

— Lets you set default message text option values

for both Text and Pic messages.

• Picture/Video Message

— Lets you set default picture message

option values.

Page 66

Use the navigation keys to highlight the desired option.

3. Press the key to perform the function for the

highlighted option.

General Message Settings

1. In standby mode, press the

Message

(right) soft key ( ),

then press (for

Msg Settings

) and for

General

The following general message options appear in the

display:

•Auto Save

— Lets you set whether to automatically save to the Outbox folder, to discard, or to prompt you to save unsent messages when you exit them.

• Auto Erase

— Automatically erase the oldest read message after

memory is full.

•Quick Text

— Lets you change pre-composed text or compose

text for addition to your outgoing messages.

• Voicemail #

— Lets you update your Voicemail access number.

• Entry Mode

— Lets you set the default text entry mode [T9 Word, Abc/ABC (alphabetically, or 123 (numerical)] for composing message text.

• Callback #

— Lets you disable, enable, and update the callback

number that can be inserted in outgoing messages.

• Signature

— Lets you disable, enable, and update the text

signature that can be inserted in outgoing messages.

• Reminder

— Lets you set the message receipt reminder to play

Once, Every 2 Minutes, Every 15 Minutes

, or not to play (

Off)

2. Use the navigation keys to highlight the desired sub-menu.

3. Press the key to enter the sub-menu and change the

selected message settings.

Text Message Settings

1. In standby mode, press the

Message

(right) soft key ( ),

then press (for

Msg Settings

) and for

Text

Message

. The following Text message options appear in

the display:

•Auto View

— Automatically view messages as they are received.

•Auto Scroll

— When set to On, the phone automatically scrolls message text, letting you see the complete message text without using the navigation keys.

2. Use the navigation keys to highlight the desired sub-menu.

3. Press the key to enter the sub-menu and change the

selected message settings.

Picture/Video Message Settings

1. In standby mode, press the

Message

(right) soft key ( ),

then press (for

Msg Settings

) and for

Picture/

Video Message

. The following picture message options

Page 67

Messaging 64

appear in the display:

• Auto Receive

— Lets you choose whether to be prompted to retrieve picture or video messages from your provider’s email server or to automatically retrieve all picture or video messages as they are received by the server.

2. Use the navigation keys to highlight the desired sub-menu.

3. Press the key to enter the sub-menu and change the

selected message settings.

Page 68

Section 8: Axcess Shop

This section explains the Axcess Shop features where users can download multimedia, applications, games, and check news and sports.

Finding Applications

With Axcess Shop, you can download full featured applications over the air including games, personalized ring tones, pictures, and more.

1. In standby mode, do one of the following to launch Axcess

Shop:

•

Press the Right navigation key.

•

Press the

key ( ), then press (for

Axcess Shop

)

and for

Axcess Shop

Note:

The first time you launch Axcess Shop, the warning message “

Browse

& Download use airtime

.” pops up in your display. To have this message

repeat the next time you launch Axcess Shop, press the

Continue

(left)

soft key ( ). To stop this message repeating, press the

Remove

(right)

soft key ( ).

The Axcess Shop screen appears in the display with the

Shop Now!

icon ( ) highlighted. You have the following

options:

•

Press the key.

The Axcess Shop

menu appears in the display. You can use the items in this menu to browse or search for, purchase, and download applications.

•

Use the navigation keys to select an application on your phone that you wish to launch.

Page 69

Axcess Web 66

Section 9: Axcess Web

This section outlines how to launch Axcess Web, how to navigate to other pages on the web, and how the keys on the keypad are used with the web application. Additionally, links to other sites are briefly discussed.

Axcess Web

With Axcess Web, you can conveniently surf the web and download ringtones and wallpapers using your phone. Each time you launch Axcess Web, your phone connects to the Internet and the service indicator icon ( ) appears in the display.

Stored Web Content

Axcess Web ends an Internet connection after a certain period of inactivity, however some information from your session remains stored in the phone (if you leave your phone turned on). You can access this information without reconnecting to the Internet. However, if you are viewing stored information, and you select a link to a site that was not accessed in your last session, you automatically re-connect to the Internet.

Launching Axcess Web

1. In standby mode, do one of the following to launch

Axcess

Web

•

Press the Up navigation key.

•

Press the

key ( ), then press (for

Axcess Web

)

and for

Axcess Web

Note:

The first time you launch Axcess Web, the warning message “

Browse &

Download use airtime

.” pops up in your display. To have this message

repeat the next time you launch Axcess Web, press the

Continue

(left)

soft key ( ). To stop this message repeating, press the

Remove

(right)

soft key ( ).

A list of categories (each representing one or more web

sites) appears in the display.

2. Use the navigation keys to browse the categories.

3. Once the desired category is highlighted, press the (left)

soft key ( ) to enter the category list.

Exit Axcess Web

䊳

Press to exit

Axcess Web

Using Axcess Web

When you use Axcess Web, some of the keys operate differently than during a normal phone call. Axcess Web presents on-screen items in any of the following ways:

•

Text or numeric input.

Page 70

•

Links (embedded in content).

•

Numbered options (some may not be numbered).

•

Simple text.

You can act upon options or links by using the soft keys.

Axcess Web soft keys

The bottom of the Axcess Web display is a bar that contains browser commands. The Left and Right ( ) soft keys on the keypad are used to execute the command that appears above them in the display. These are called “soft keys” because their function changes depending on the application.

Using Links

Links have several purposes, such as jumping to a different page, to a different site, or even initiating a phone call. Links are shown inside of brackets ([ ]). You can normally use the Left soft key ( ) to select a link when it is highlighted.

How Axcess Web Keys Work

The following table lists Axcess Web keys and their functions.

Navigation keys

— Use to browse lists and

options.

BACK Key

— A browse, back-up key. Press once to back up one page. Press and hold to go back to home page.

Press to clear the last number, letter, or symbol entered. Press and hold to completely clear the display.

Asterisk/Shift Key

— Press before entering

text to enable uppercase characters.

Last Key

— Press to enter a zero (0), or to

move to the last item in a menu.

Pound/Space Key

— Press to insert a space

when entering text.

Number 1 thru 9

— Use the number keys to

select items in a menu if they are numbered.

End Key

— Press to exit the Axcess Web and

return the phone to standby mode.

Left Soft Key

— Press to activate the

command that appears above it in the display.

Right Soft Key

— Press to activate the

command that appears above it in the display.

Page 71

Celltop 68

Section 10: Celltop

Celltop (an Alltel application and service) displays cells on your phone to provide you with information you choose, instantly— anytime, anywhere.

This section outlines how to launch Celltop on your phone.

Note:

For more information, refer to the Celltop Guide or call 1-800-ALLTEL-1

(1-800-255-8351).

Celltop

With Celltop, you can display any of a set of customizable cells listing information, such as:

•

Messages in your Inbox.

•

Call records in your Calls Log.

•

Ringtones, those already available on your phone and those you can get.

•

Current weather at your chosen locations.

•

Scores and standings of your favorite sports.

•

Stock quotes that interest you.

•

Latest headlines from selected news services.

Note:

For more information, refer to the Celltop Guide or call 1-800-ALLTEL-1

(1-800-255-8351).

Launching Celltop

䊳

In standby mode, press the Celltop (left) soft key ( ). One of

the following appears in the display:

–

CELLTOP SETUP

screen

–

Two of your Celltop cells

Page 72

Section 11: Camera-Camcorder

Use your Samsung phone to take full color digital pictures and videos, display them on your phone’s vivid color display, and instantly share them with family and friends. It’s fun, and as easy to use as a traditional point-and-click camera or camcorder. This section explains how you can do the following:

•

Take pictures and videos with your phone’s built-in digital cameracamcorder.

•

Send and receive pictures and videos taken with your phone’s cameracamcorder.

•

Set the several options associated with the camera-camcorder that help you take crisp, clear pictures and videos.

Taking Pictures and Videos

Taking pictures videos with the built-in camera-camcorder is as simple as choosing a subject, pointing the lens (located on the rear of your phone, at the top), and pressing a button.

Taking Snap Shots (Single Pictures)

To take a single picture using the current camera settings, do the following:

1. In standby mode, press the Camera key ( ) on the left

side of the phone. The message “Loading...” appears in

the display followed by a camera view finder screen. (For

more information, refer to “Screen Layouts” on page 72.)

Note:

You can also activate the camera by pressing the

key ( ), then

press (for

Multimedia

) and for

Camera

2. Using the display as a viewfinder, point the camera at your

subject.

3. Press the key when the image that you wish to

capture appears in the display.

4. Press the

Save

(left) soft key ( ) to save the picture to

memory.

5. Press the

Erase

(right) soft key ( ) to erase the photo.

6. To exit the Camera feature, with the phone open press the

key, with the phone closed press and hold the

HOLD

key ( ).

Tip:

You can change a number of the camera’s settings to suit particular uses

for your pictures. For more information, refer to “Camera Options” on page 75.

Page 73

Camera-Camcorder 70

Taking Multi Shot Pictures

When taking pictures of moving subjects or subjects you cannot pose, such as children and pets, the camera’s Multi Shot mode simplifies the process of taking multiple pictures in quick succession. After taking Multi Shot pictures, the camera automatically displays thumbnail views of the pictures you have just taken so you can select the best picture(s) and discard the rest.

1. In standby mode, press the

Camera

key ( ) on the left

side of the phone. The message “Loading...” appears in

the display followed by a camera view finder screen. (For

more information, refer to “Screen Layouts” on page 72.)

Note:

You can also activate the camera by pressing the

key ( ), then

press (for

Multimedia

) and for

Camera

2. Press the

Options

(right) soft key ( ). The options menu

bar appears in the display with the

Self Timer

icon ( )

highlighted.

3. Use the Left and Right navigation keys to highlight the

Multi Shot

icon ( ). The following

Multi Shot

options

appear in the display:

•Series Shot

— Lets you take a series of 3 or 5 photos.

• Divided Shot

— Lets you take a mosaic of 4 or 9 photos.

• Auto/Manual

— Lets you select to take the multiple photos automatically (in quick succession) or to take each successive photo manually.

4. When you select

Series Shot

option and press the key.

The following options appear in the display:

•Off

•3

•5

When you select Divided Shot and press the key, the

following options appear in the display:

•Off

•4

•9

5. Use the

and

Down

navigation keys to highlight 3 or 5

(Series Shot) or 4 or 9 (Divided Shot), then press the

key.

The Series Shot progress bar ( or

) or the Divided Shot icon (

or ) (which acts as a progress bar while pictures are

being take) appears in the display.

Page 74

Using the display as a viewfinder, point the camera lens at

your subject.

7. Press the key when the image that you wish to

capture appears in the display. The camera takes one

picture (

Manual

) or multiple pictures in quick succession

(

Auto

), then the Series Shot

Select to Save

screen or the

Divided Shot multiple-photo screen appears in the display.

•Series Shot

–

To save the pictures to memory, press the Done (left) soft key ( ).

–

To discard the pictures, press the key.

• Divided Shot

–

To save the pictures to memory, press the

Save

(left) soft key ( ).

–

To send the picture to AxcessMyPics.com or in a picture message, press the

Send

soft key ( ).

–

To discard the pictures, press the

Erase

(right) soft key ( ).

Taking Videos

To take a video using the current camcorder settings, do the following:

1. In standby mode, press and hold the

Camera

key ( ) on

the left side of the phone. The message “

...”

appears in the display followed by the camcorder view

finder screen. (For more information, refer to “Camcorder

Screen” on page 73.)

Note:

You can also activate the camcorder by doing one of the following:

1. Pressing the

key ( ), then press (for

Multimedia

) and

for

Camcorder

2. From the camera screen, by pressing the

Camera

key ( ).

3. From the camera screen, by pressing the

Options

(right) soft key, using the Left and Right navigation keys to highlight the Camcorder icon, and then pressing the key.

2. Using the display as a viewfinder, point the camera lens at

your subject.

3. Press the

Rec

( ) key when the image that you wish to

capture appears in the display. Recording continues until

you press the

Stop

( ) key or until 30 seconds of video

has been recorded, whichever comes first.

4. Press the

Save

(left) soft key ( ) to save the video to

memory.

5. Press the

Erase

(right) soft key ( ) to erase the video.

Page 75

Camera-Camcorder 72

Screen Layouts

Camera Screen

When you activate your phone’s camera, the second line of the display is reserved for the current camera resolution setting and the picture counter. The center of the display shows a viewfinder image of the subject at which the camera is pointed. The soft key labels on the bottom line of the display change to the following:

•

My Images

— Pressing the Left soft key ( ) opens the

My Images

multimedia folder so you can view or manage your stored pictures. (For more information, refer to

“The Photo Gallery”

on page 87.)

•

Take

— Pressing the key takes a picture of the image currently

appearing on the display.

•

Options

— Pressing the right soft key ( ) opens a menu bar of

camera options and settings.

Camera Screen Icons

Camera

— Indicates the camera is active.

Night Shot

— Indicates the camera is set to

take pictures in low light.

Quality

— Indicates camera’s picture quality setting. (You can change the picture quality setting. (For more information, refer to “Quality” on page 83.)

Camera Resolution

— Indicates camera’s current resolution setting. (You can change the camera resolution setting. For more information, refer to “Camera Options” on page 75.)

Photo Limit

— Indicates the available number of photos you can take. (Depending on the camera resolution setting.)

White Balance

— Indicates camera’s white balance setting. (You can change the camera white balance setting. (For more information, refer to “White Balance” on page 77.)

Phone Memory

— Indicates photos will be

stored in the phone’s memory.

Card Memory

— Indicates photos will be

stored on a microSD Memory Card.

Zoom

— Enlarges the image from X0 to X9 before you take a picture. (Depending on the camera resolution setting.)

Page 76

Brightness

— Brightens or darkens the

image from

-4 to +4.

Multi Shot in use (Divided Shot)

— Takes

multiple pictures automatically (as shown) or

manually ( ) when you press the key. The number of pictures taken depends upon

the Divided Shot setting.

Multi Shot in use (Series Shot)

— Takes multiple

pictures when you press

the key. The number of pictures taken

depends upon the Series Shot setting.

Self Timer in use

— Delays the camera

shutter from 2 to 10 seconds after you press

the key.

Camcorder Screen

When you activate your phone’s camcorder, the first line of the display is shows current camcorder setting icons. The center of the display shows a viewfinder image of the subject at which the camcorder is pointed. The soft key labels on the bottom line of the display change to the following:

•

My Videos

— Pressing the left soft key ( ) opens the

My Videos

multimedia folder so you can view or manage your stored pictures. (For more information, refer to

“The Photo Gallery”

on page 87.)

•

Rec

— Pressing the key starts the camcorder recording a video

of the image currently appearing in the display.

•

Options

— Pressing the right soft key ( ) opens a menu bar of

camcorder options and settings.

Camcorder Screen Icons

Camcorder

— Indicates the camcorder is

active.

Quality

— Indicates camcorder’s video quality setting. (You can change the video quality setting. For more information, refer to “Quality” on page 83.)

Page 77

Camera-Camcorder 74

Memory Available

— Indicates the percentage of memory available for you to store a video.

White Balance

— Indicates the camcorder’s white balance setting. (You can change the camcorder white balance setting. For more information, refer to “White Balance” on page 77.)

Phone Memory

— Indicates videos will be

stored in the phone’s memory.

Card Memory

— Indicates videos will be

stored on a microSD Memory Card.

Zoom

— Enlarges the image from X0 to X9 before you take a video. (Depending on the camcorder quality setting.)

Brightness

— Brightens or darkens the

image from 4 to +4.

elf Timer in use

— Delays the

camcorder from recording for from 2 to 10

seconds after you press the key.

Recording Mode

— Indicates camcorder is in MMS mode (as shown) with Quality and recording time limits or in Normal

mode ( ).

Saving Pictures and Videos

After you’ve taken a picture or video, you can do any of the following:

•

Save the picture or vide

o by pressing the

Save

(left) soft key ( ).

A picture is stored in the

My Images

folder. A video is stored in the

My Videos

folder. These folders are part of the phone’s memory and/or part of an optional Memory Card devoted to storing, browsing, and viewing saved pictures and videos. (For more information, refer to “The Photo Gallery” on page 87.)

•

Send the picture or video

to someone else by pressing the

Send

( ) key.

For a detailed procedure, see “Creating and Sending a Picture

Message” on page 53 or see “Creating and Sending a Video Message” on page 55.

•

Discard the picture or video

by pressing the

Erase

(right) soft

key ( ).

Page 78

Camera Options

The Camera Options let you adjust the default camera settings to suite available lighting, the subject of the photo, or the purpose of the photo. To access Camera Options, do the following:

1. In standby mode, press and hold the Camera key ( ).

The camera viewfinder screen appears in the display.

2. Press the

Options

(right) soft key ( ). The following sub-

menus appear in the display:

•Self Timer

•Multi Shot

• Quality

•Resolution

• White Balance

• Fun Tools

• Settings

• Camcorder

3. Use the Left and Right navigation keys to highlight the

desired option and/or setting, then press the key to

save the selected setting.

Self Timer

Self Timer lets you delay taking a picture long enough to let you join others in a picture.

1. In camera mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

2. Use the navigation keys to highlight one of the following

Self Timer

options:

•Off

•2 Sec.

•5 Sec.

• 10 Sec.

3. Press the key. If you select

2 Sec., 5 sec.

, or

10 sec.

the Self Timer icon appears in the camera screen in the

display.

The next time you press the key, the countdown timer

indicates the time remaining before the camera takes the

picture. The phone reads the countdown timer value

beginning with two or three and continuing to zero, when

the picture is taken.

Page 79

Camera-Camcorder 76

Tip:

To stop the countdown timer without resetting it, press the key.

Multi Shot

Multi Shot lets you take multiple pictures in succession at the touch of a key.

1. In camera mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

2. Use the navigation keys to highlight one of the following

Multi Shot

options:

•Series Shot

— Off / 3 pictures taken in succession / 5 pictures

taken in succession.

• Divided Shot

— Off / 4 of the same new picture in a 2-by-2 array

/ 9 of the same new picture in a 3-by-3 array.

• Auto/Manual

— Automatically takes pictures / You Manually take

the pictures.

3. Press the key to save the setting. The camera screen

appears in the display.

Note:

When a Multi Shot option is set to a value other than Off, either a Series

Shot progress bar ( ) or a Divided Shot icon ( ) appears in the viewfinder screen.

The next time you press the key, the camera takes

several pictures in rapid succession.

Quality

You can affect how much your photo is compressed, thereby reducing it’s overall size (not to be confused with resolution).

1. In camera mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

2. Use the navigation keys to highlight one of the

Quality

options:

Fine, Normal

, or

Economy

3. Press the key. You’re returned to the camera

viewfinder screen.

Resolution

Change the size (in bytes) of your pictures using the Resolution setting.

1. In camera mode, press the Options (right) soft key ( ).

The options menu bar appears in the display.

2. Use the navigation keys to highlight one of the following

Resolution

options:

• 1600 X 1200

(pixels)

• 1280 X 960

(pixels)

Page 80

• 640 X 480

(pixels)

• 320 X 240

(pixels)

• 176 X 144

(pixels)

• 160 X 120

(pixels)

• Picture ID

— lets you take pictures the correct size and resolution

for Contacts list picture IDs.

3. Press the key. You’re returned to the camera

viewfinder screen.

Note:

The Resolution setting affects zoom capabilities. When Resolution is set to 1600 X 1200, zoom is not available. When Resolution is set to any value lower than 1600 X 1200, zoom settings 1 – 9 are available.

White Balance

White Balance allows you to adjust picture quality according to available light.

1. In camera mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

2. Use the navigation keys to highlight one of the following

White Balance

options:

•Auto

— The camera automatically adjusts picture quality to

available light.

• Sunny

— Use this setting when taking pictures in full sun.

• Cloudy

— Use this setting when taking pictures in cloudy

conditions.

• Tungsten

— Use this setting when taking pictures under

incandescent lights.

• Fluorescent

— Use this setting when taking pictures under

fluorescent lights.

Each option, as you highlight it, shows the effects it has on a picture.

3. When you decide on the White Balance you wish to use,

press the key. The camera viewfinder screen appears

in the display with your selected White Balance applied.

The next time you press the key, the camera applies

the selected White Balance to your picture.

Fun Tools

Color Effects

Change the look of your pictures with Color Effects. Choose from eight available settings such as Gray, Negative, and Sepia. The selected color effect previews in the display before you take the picture.

1. In camera mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

Page 81

Camera-Camcorder 78

Use the navigation keys to highlight

Fun Tools

, and then

highlight

Color Effects

3. Press the key. The following options appear in the

display:

Note:

Choose Normal to disable Color Effects.

•Normal

— Subjects and pictures appear with a normal hue.

•Black&White

— Subjects and pictures appear in black and white.

•Sepia

— Subjects and pictures appear in a brownish-gray hue.

•Negative

— Subjects and pictures appear in inverted colors.

•Green

— Subjects and pictures appear in a greenish hue.

• Aqua

— Subjects and pictures appear in an aqua hue.

4. Use the navigation keys to highlight the color effect of your

choice is highlighted, then press the key. You’re

returned to the camera viewfinder screen.

When you take your next picture, the phone’s display

previews your subject image with the selected color effect.

Fun Frames

Fun Frames lets you temporarily apply one of the preloaded picture frames in your phone to characterize or enhance one or more pictures.

Note:

The None frame is a blank frame.

1. In camera mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

2. Use the navigation keys to highlight

Fun Tools

, and then

highlight

Fun Frames

3. Press the key. A pop-up menu of the available Fun

Frames appears in the display.

4. Use the Up and Down navigation keys to show the various

Fun Frames.

5. When you decide on the frame you wish to use, press the

key. The camera screen appears in the display with

your selected Fun Frame in place.

The next time you press the key, the camera includes

the selected Fun Frame in your picture.

Page 82

Settings

Memory

1. In camera mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

2. Use the Left and Right navigation keys to highlight

Settings

3. Use the Up and Down navigation keys to highlight Memory,

then press the key. The following Memory options

appear in the display:

• Phone

— Stores pictures in phone memory.

•Card

— Stores pictures on an optional microSD Memory Card.

4. Use the Up and Down navigation keys to highlight the

memory location setting of your choice, then press the

key. You’re returned to the camera viewfinder screen.

Auto Save

1. In camera mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

2. Use the Left and Right navigation keys to highlight

Settings

3. Use the Up and Down navigation keys to highlight

Auto

Save

, then press the key. The following options

appear in the display:

•Off

•On

4. Use the Up and Down navigation keys to highlight the

automatic save setting of your choice, then press the

key. You’re returned to the camera viewfinder screen.

Icon Display

1. In camera mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

2. Use the Left and Right navigation keys to highlight

Settings

3. Use the Up and Down navigation keys to highlight

Icon

Display

, then press the key. The following options

appear in the display:

• Display All

— Shows camera icons as seen in “Camera Screen

Icons” on page 72.

• Guideline

— Shows a cross hatch pattern in the view finder

screen.

Page 83

Camera-Camcorder 80

•No Icons

— Shows a nearly full-display subject image and without

icons.

4. Use the Up and Down navigation keys to highlight the

viewfinder screen setting of your choice, then press the

key. You’re returned to the camera viewfinder screen.

Metering

1. In camera mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

2. Use the Left and Right navigation keys to highlight

Settings

3. Use the Up and Down navigation keys to highlight

Metering

, then press the key. The following options

appear in the display:

•Average

— Adjusts exposure to the average light level over a large

picture area.

•Center

— Adjusts exposure to the average light level over a center

portion of the subject.

•Spot

— Adjusts exposure to the light level over a small portion of

the subject.

4. Use the Up and Down navigation keys to highlight the

Metering setting of your choice, then press the key.

You’re returned to the camera viewfinder screen.

When you take your next picture, the phone’s display

previews your subject image with the measured exposure.

View Mode

1. In camera mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

2. Use the Left and Right navigation keys to highlight

Settings

3. Use the Up and Down navigation keys to highlight

View

Mode

, then press the key. The following options

appear in the display:

• Landscape

— Shows a wider, more panoramic view of the

subject.

•Portrait

— Shows a narrower, more vertically oriented view of the

subject.

4. Use the Up and Down navigation keys to highlight the view

mode setting of your choice, then press the key.

You’re returned to the camera viewfinder screen, which

now shows the selected view.

Night Shot

1. In camera mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

Page 84

Use the Left and Right navigation keys to highlight

Settings

3. Use the Up and Down navigation keys to highlight

Night

Shot

, then press the key. The following options appear

in the display:

•Off

•On

4. Use the Up and Down navigation keys to highlight the Night

Shot setting of your choice, then press the key. You’re

returned to the camera viewfinder screen.

Shutter Sound

Choose from four different sounds whenever you take a picture. Aside from being a cool sound effect, Shutter Sounds acts as an audible reminder that your camera has taken a picture.

1. In camera mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

2. Use the Left and Right navigation keys to highlight

Settings

3. Use the Up and Down navigation keys to highlight

Shutter

Sound

, then press the key. The following shutter

sounds appear in the display:

•Off

• Shutter

•OK

• DingDong

4. Use the Up and Down navigation keys to highlight the

shutter sound setting of your choice, then press the

key. You’re returned to the camera viewfinder screen.

Reset Settings

1. In camera mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

2. Use the Left and Right navigation keys to highlight

Settings

3. Use the Left and Right navigation keys to highlight

Reset

Settings

, then press the key. You are prompted to

confirm reset of all camera settings.

•

Select the

Ye s

option to reset the camera settings to default values.

•

Select the No option to keep the current camera settings.

Page 85

Camera-Camcorder 82

Camcorder

1. In camera mode, press the Options (right) soft key ( ).

The options menu bar appears in the display.

2. Use the Left and Right navigation keys to highlight

Camcorder

, then press the key. The Camcorder view

finder screen appears in the display.

Camcorder Options

The Camcorder Options let you adjust the default camcorder settings to suite available lighting, the subject of the video, or the purpose of the video. To access Camcorder Options, do the following:

1. In standby mode, press and hold the

Camera

key ( ).

The camcorder viewfinder screen appears in the display.

2. Press the Options (right) soft key ( ). The following sub-

menus appear in the display:

• Recording Mode

•Self Timer

• Quality

• White Balance

• Color Effects

• Settings

•Camera

3. Use the Left and Right navigation keys to highlight the

desired option and/or setting, then press the key to

save the selected setting.

Recording Mode

1. In camcorder mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

2. Use the navigation keys to highlight

Recording Mode

. The

following options appear in the display:

• Limit for MMS

— Record videos that are a maximum of 30

seconds long. The videos can be included in video messages.

•Normal

— Record videos that are any length up, depending on

available memory.

3. Use the Up and Down navigation keys to highlight the

desired recording mode setting, then press the key.

The camcorder screen appears in the display.

Self Timer

Self Timer lets you delay taking a video long enough to let you join others in the video.

1. In camcorder mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

Page 86

Use the Left and Right navigation keys to highlight

Self

Timer

The following options appear in the display:

•Off

•2 Sec.

•5 Sec.

• 10 Sec.

3. Use the Up and Down navigation keys to highlight the

desired delay, then press the key. The camcorder

screen appears in the display.

The next time you press the key, a countdown timer in

the display indicates the time remaining before the

camcorder starts recording the video. The phone reads the

countdown timer value beginning with two or three and

continuing to zero, when recording begins.

Tip:

To stop the countdown timer without resetting it, press the key.

Quality

You can affect how much your video is compressed, thereby reducing it’s overall size (not to be confused with resolution).

1. In camcorder mode, press the Options (right) soft key ( ).

The options menu bar appears in the display.

2. Use the Left and Right navigation keys to highlight

Quality

3. Use the Up and Down navigation keys to highlight

Fine

Normal

, or

Economy

4. Once the quality setting of your choice is highlighted, press

the key. You’re returned to the camcorder viewfinder

screen.

White Balance

White Balance allows you to adjust video quality according to available light.

1. In camcorder mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

2. Use the Left and Right navigation keys to highlight

White

Balance

. The name of the current White Balance setting

appears in the second line of the display. The options are:

•Auto

— The camcorder automatically adjusts color balance to

available light.

• Sunny

— Use this setting when recording videos in full sun.

• Cloudy

— Use this setting when recording videos in cloudy

conditions.

Page 87

Camera-Camcorder 84

• Tungsten

— Use this setting when recording videos under

incandescent lights.

• Fluorescent

— Use this setting when recording videos under

fluorescent lights.

3. Use the Up and Down navigation keys to show the various

White Balances and the effects they have on a video.

4. When you decide on the White Balance you wish to use,

press the key. The camcorder viewfinder screen

appears in the display with your selected White Balance

applied.

The next time you press the key, the camcorder

applies the selected White Balance to your video.

Color Effects

Change the look of your videos with Color Effects. Choose from eight available settings such as Gray, Negative, and Sepia. The selected color effect previews in the display before you take the picture.

1. In camcorder mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

2. Use the navigation keys to highlight one of the following

Color Effects

Note:

Choose Normal to disable Color Effects.

•Normal

— Subjects and pictures appear with a normal hue.

•Black&White

— Subjects and pictures appear in black and white.

•Sepia

— Subjects and pictures appear in a brownish-gray hue.

•Negative

— Subjects and pictures appear in inverted colors.

•Green

— Subjects and pictures appear in a greenish hue.

•Aqua

— Subjects and pictures appear in an aqua hue.

3. After you highlight the color tone of your choice, then press

the key. You’re returned to the camcorder viewfinder

screen.

When you record your next video, the phone’s display

previews your subject image with the selected color effect.

Settings

Memory

1. In camcorder mode, press the Options (right) soft key ( ).

The options menu bar appears in the display.

2. Use the Left and Right navigation keys to highlight

Settings

Page 88

Use the Up and Down navigation keys to highlight

Memory

then press the key. The following Memory options

appear in the display:

• Phone

— Stores videos in phone memory.

•Card

— Stores videos on an optional microSD Memory Card.

4. Use the Up and Down navigation keys to highlight the

memory location setting of your choice, then press the

key. You’re returned to the camcorder viewfinder

screen.

Auto Save

1. In camcorder mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

2. Use the Left and Right navigation keys to highlight

Settings

3. Use the Up and Down navigation keys to highlight

Auto

Save

, then press the key. The following options

appear in the display:

•Off

•On

4. Use the Up and Down navigation keys to highlight the

automatic save setting of your choice, then press the

key. You’re returned to the camcorder viewfinder screen.

Icon Display

1. In camcorder mode, press the Options (right) soft key ( ).

The options menu bar appears in the display.

2. Use the Left and Right navigation keys to highlight

Settings

3. Use the Up and Down navigation keys to highlight

Icon

Display

, then press the key. The following options

appear in the display:

•Display All

— Shows camcorder icons as seen in “Camcorder

Screen Icons” on page 73.

• No Icons

— Shows a nearly full-display subject image and without

icons.

4. Use the Up and Down navigation keys to highlight the

viewfinder screen setting of your choice, then press the

key. You’re returned to the camcorder viewfinder

screen.

Page 89

Camera-Camcorder 86

Start Sound

Choose from two different sounds whenever you begin video recording. Aside from being a cool sound effect, Start Sound acts as an audible reminder that your camcorder has begun recording a video.

1. In camcorder mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

2. Use the Left and Right navigation keys to highlight

Settings

3. Use the Up and Down navigation keys to highlight

Start

Sound

, then press the key. The following options

appear in the display:

•Off

• Look here

• 1,2,3!

4. Use the Up and Down navigation keys to highlight the

desired start sound, then press the key. You’re

returned to the camcorder viewfinder screen.

End Sound

Choose from two different sounds whenever you stop video recording. Aside from being a cool sound effect, End Sound acts

as an audible reminder that your camcorder has stopped recording a video.

1. In camcorder mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

2. Use the Left and Right navigation keys to highlight

Settings

3. Use the Up and Down navigation keys to highlight

End

Sound

, then press the key. The following options

appear in the display:

•Off

•OK

•Melody

4. Use the Up and Down navigation keys to highlight the

desired end sound, then press the key. You’re

returned to the camcorder viewfinder screen.

Reset Settings

1. In camcorder mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

2. Use the Left and Right navigation keys to highlight

Settings

Page 90

Use the Up and Down navigation keys to highlight

Reset

Settings

, then press the key. You are prompted to

confirm reset of all camcorder settings.

•

Select the

Ye s

option to reset the camcorder settings to default

values.

•

Select the No option to keep the current camcorder settings.

Camera

1. In camcorder mode, press the

Options

(right) soft key ( ).

The options menu bar appears in the display.

2. Use the Left and Right navigation keys to highlight

Camera

then press the key. The Camera viewfinder screen

appears in the display.

Zoom

Zoom lets you temporarily enlarge the pictures you take. Increasing the Zoom (1 – 9) enlarges your pictures or videos (0 is normal).

䊳

In camera or camcorder viewfinder screen, use the Up and

Down navigation keys to adjust the Zoom (the screen

image enlarges to show the affects of your changes).

The next time you press the key, the camera takes an

enlarged picture or the camcorder takes an enlarged video

according to your selected Zoom setting.

Brightness

Brightness lets you temporarily lighten the pictures you take. Increasing the Brightness (-4 – +4) lightens your pictures (0 is normal).

䊳

In camera or camcorder viewfinder screen, use the Left

and Right navigation keys to adjust the Brightness (the

screen image lightens or darkens to show the affects of

your changes).

The next time you press the key, the camera takes a

lighter or darker picture or the camcorder records a lighter

or darker video according to your selected Brightness

setting.

The Photo Gallery

Saved pictures are stored in the My Images folder. You can browse the pictures one at a time (expanded mode), or view several pictures at once in thumbnail format.

Page 91

Camera-Camcorder 88

In the Camera viewfinder screen, press the

My Images

(left)

soft key ( ). Any pictures that you’ve saved appear in the

display.

2. Use the navigation keys to browse pictures in the gallery.

3. Press the

Options

(right) soft key ( ) while viewing

pictures in the Gallery. The following options appear in the

display:

•Send

— Send the currently displayed or highlighted picture as a

Picture message.

• Online Album

— Send the currently displayed or highlighted

picture to the Online Album.

•Set As

— Assign the currently displayed or highlighted picture to be standby screen Wallpaper or as a Picture ID for someone in your Contacts list.

• Slide Show

— Show the pictures as a full screen slide show.

•Rename

— Rename the currently displayed or highlighted picture.

•Move

— Relocate the currently displayed or highlighted picture from phone memory to a Memory Card or from a Memory Card to phone memory.

•Lock / Unlock

— Lock the currently displayed or highlighted picture so that it cannot be deleted, or unlock the picture so that it can be deleted.

• Erase Files

— Erase selected unlocked pictures in the Picture Gallery. Locked pictures must be unlocked before you can erase them.

• Picture Info

— View the Title, time and date created, size, and

resolution of the currently highlighted or displayed picture.

4. Use the navigation keys to highlight the desired option.

Press the key to perform the function for the option or

enter its sub menu.

Switch From Expanded to Thumbnail Mode

1. Use the navigation keys to highlight a picture that you wish

to view full size, press the key.

2. Press the key to return to the thumbnail view of your

photos.

Point, Click, and Send Pictures and Videos

Take a picture or record a video and send it to anyone with a compatible device in a few easy steps.

1. In standby mode, press the

Camera

key ( ) to activate

the camera.

Press the

Camera

key ( ) a second time to activate the

camcorder.

Page 92

Using the display as a viewfinder, take the desired picture

or record the desired video by pressing the key.

Press the key a second time to stop video recording.

3. Press the

Send

soft key ( ). You are prompted to send

the picture(s) or video to AxcessMyPics.com.

4. Use the Up and Down navigation keys to highlight

and

press the key. The

Create Pic Msg

Create Video Msg

screen appears in the display.

Note:

For more information about AxcessMyPics.com, contact your Wireless Provider.

5. Enter the recipient’s phone number or email address using

the keypad.

6. Press the key to save the address(es) and move to the

Subject

field. Use the navigation keys to move to the other

message fields. For more information, refer to

“Messaging” on page 52.

7. When you are finished composing your message, press the

SEND

soft key ( ) to send the Picture or Video message

to the intended recipients.

Page 93

Multimedia 90

Section 12: Multimedia

This section outlines your phone’s multimedia functions and key features associated with multimedia.

Accessing Multimedia

1. In standby mode, press the

key ( ), then press

for

Multimedia

. The following Multimedia sub-

menus appear in the display:

•Camera

— Lets you launch and set up your phone’s camera. (For

more information, refer to

“Camera-Camcorder”

on page 69.)

• Camcorder

— Lets you launch and set up your phone’s

camcorder. (For more information, refer to

“Camera-

Camcorder”

on page 69.)

•Music Player

— Lets you play and manage music files stored on a

memory card.

•My Images

— Lets you choose the multi-media or pictures that

appear in your phone’s display.

•My Videos

— Lets you choose the videos that appear in your

phone’s display.

• My Ringtones

— Lets you assign melody tones for calls, alarms,

and other alerts.

• My Sounds

— Lets you assign melody tones for calls, alarms, and

other alerts.

• Shuffle

— Lets you assign multiple images and melody tones that

will play in random order for calls.

2. Use the navigation keys to highlight a sub-menu.

3. Press to enter the highlighted sub-menu. The

following sections describe the above listed sub-menus in

greater detail.

Music Player

Music Player lets you play downloaded music files (MP3) stored on a Memory Card.

Launching the Music Player Library Menu

1. In standby mode, press the

key ( ), then press

(for

Multimedia

) and for

Music Player

Tip:

You can also directly access the Music Player by using the Music Player shortcut. In standby mode, press the Left navigation key.

Page 94

The Library screen appears

in the display, showing the

following options:

•All

— Lists all music files on the Memory Card and lets you play individual music files or play multiple music files by creating a temporary music playlist.

•Artists

— Lists artist names for music files on the Memory Card and lets you play one or more music files by a selected artist.

• Albums

— Lists album titles for music files on the Memory Card

and lets you play one or more music files from a selected album.

•Genres

— Lists music categories for music files on the Memory Card and lets you play one or more music files of a particular music category.

• Playlists

— Lists any playlists you have saved and lets you create,

save, and manage playlists.

2. Use the Navigation key to

highlight a music file, then:

•

Press the

Play

(left) soft key

( ) to play the file.

•

Press the

MARK

key to select the file for playing or other options.

•

Press the

Options

(right) soft key ( ) to select and apply any of the following options to the highlighted or marked music files(s):

–

Mark All

— Marks all listed music files for playing, removal, or

assignment of player settings.

–

Remove

— Deletes highlighted or marked music file(s) from the

Memory Card.

–

Properties

— Lists the title, artist, album, genre, copyright information,

time length, file size, and bitrate of the highlighted music file.

–

Player Settings

— Lets you assign a particular Visualizer to

highlighted or marked music file(s).

Use the Up and Down navigation keys to highlight an option, then press the key.

Page 95

Multimedia 92

Playing Music

1. In standby mode, press the

key ( ), then press

(for

Multimedia

) and

for

Music Player

Tip:

You can also directly access the Music Player by using the Music Player shortcuts. In standby mode, press the Left navigation key.

The

Library

screen appears

in the display, showing the following options:

•All

•Artists

• Albums

•Genres

• Playlists

2. Use the Navigation key to

highlight the desired

option, press the

VIEW

key

( ), and then do one of

the following:

• All option

— Use the Navigation key to highlight a music file, then press the

Play

(left) soft key ( ) to play the file.

Tip:

To play additional files, use the Left and Right navigation keys, or highlight and mark additional files for playback. (For more information, refer to “Launching the Music Player Library Menu” on page 90.)

• Other options

— Use the Navigation key to highlight an Artist,

Album, Genre, or Playlist, then press the

VIEW

key ( ).

Use the Navigation key to highlight a music file, then press the

Play

(left) soft key ( ) to play the file.

The Music Player screen appears in the display and the

selected music file/playlist begins playing.

Page 96

Music Player Controls

•

Volume key

–

To play a music file louder, press the Volume key Up.

–

To play a music file softer, press the Volume key Down.

•

Navigation key

–

To pause/resume playing a music file, press the key.

Note:

With the flip closed, use the touch key pad on the front of the phone to pause/resume playing a music file.

–

To stop playing a music file, press the Down navigation key.

–

To skip play to an earlier music file in the selected list, press the Left navigation key.

–

To skip play to a later music file in the selected list, press the Right navigation key.

–

To return to the selected list and choose another music file to play, press the Up navigation key.

•

Library

(left) soft key — Returns you to the

Library

screen.

•

Options

(right) soft key — Shows the following sub-menus and

options:

–

Play Mode

— Lets you change the play mode from Normal, Shuffle,

Repeat One, Repeat All, or Shuffle Repeat All.

–

Add to Playlist

— Moves you to the

Playlists

menu to let you add the

selected music file to a playlist.

–

Remove

— Temporarily drops the selected music file from the Library list. To restore the music file to the list, turn your phone off and back on again.

–

Properties

— Lists the title, artist, album, genre, copyright information,

time length, file size, and bitrate of the highlighted music file.

–

Visualizer

— Lets you change the Music Player visualization to Simple

View, Equalizer, Album Art, or Lyrics.

–

Memory Info

— Displays the

Memory Usage

screen which lists

Memory Card usage and availability amounts.

Press the Navigation key Up or Down to highlight the

desired option, then press the OK key ( ) to launch the

option or access the sub-menu.

My Images

My Images lets you choose the pictures that appear in your phone’s display while in standby mode (wallpaper) and as picture IDs for your contacts.

1. In standby mode, press the

key ( ), then press

(for

Multimedia

) and for

My Images

Page 97

Multimedia 94

If there are no pictures stored in your phone or on a

memory card, “

No Image

” appears in the

My Images

screen. [To launch the camera to take a picture, press the

Camera

(left) soft key ( ). (For more information, refer to

“Camera-Camcorder” on page 69.)]

If there are pictures stored in your phone or on a memory

card, up to four thumbnail images of your pictures appear

in the display.

Tip:

You can also access My Images from:

-The Camera screen, by pressing the

My Images

(left) soft key ( ).

-The

Edit Contact

screen, by selecting the picture ID field and pressing

the Set (left) soft key ( ).

2. Use the navigation keys to highlight a picture.

Press the key to expand the selected picture to fill the

screen.

3. Press the

Options

(right) soft key ( ). A pop-up menu

containing the following options appears in the display:

•Send

— Lets you send the selected image to a specified recipient

in a Picture message.

• Online Album

— Lets you send the selected image to an Online Album on your wireless provider’s server. For details, contact your wireless provider.

•Set As

— Lets you assign the selected picture as the

Main

Wallpaper

, the

Picture ID

for a Contact, or the

Front Wallpaper

• Slide Show

— Shows the available images as a sequence of full-

screen pictures.

•Rename

— Lets you rename the picture.

•Move

— Lets you move the picture from the phone to the memory

card or from the memory card to the phone.

•Lock / Unlock

— Lets you protect the picture from being deleted.

• Erase Files

— Erases one or more selected, unlocked pictures.

• Picture Info

— Displays information about the picture, such as the

picture

Name

, creation

Date

and

Time, Resolution

, and the data

Size

4. Use the navigation keys to highlight an option, then press

the key to invoke the selected option.

5. Press the to return to the previous menu, or press

the key to return to standby mode.

My Videos

My Videos lets you take videos, review your videos, send them as video messages, and assign your videos as wallpaper on your phone.

Page 98

In standby mode, press the

key ( ), then press

(for

Multimedia

) and for

My Videos

If there are no videos stored in your phone or on a memory

card, “

No Video

” appears in the

My Videos

screen.

If there are videos stored in your phone or on a memory

card, up to four thumbnail images from your videos appear

in the

My Videos

screen.

2. To take a new video, press the

Video

(left) soft key ( ).

The camcorder view finder screen appears in the display.

For more information, refer to “Camera-Camcorder” on

page 69.

3. To play a video, use the navigation keys to highlight a

video, then press the

PLAY

() key.

4. For more My Videos options, press the

Options

(right) soft

key ( ). The following options appear in the display:

•Send

— Lets you send the selected video to a specified recipient in

a Video message.

• Online Album

— Lets you send the selected video to an Online Album on your wireless provider’s server. For details, contact your wireless provider.

•Set As

— Lets you assign the selected video as the Main

Wallpaper.

•Rename

— Lets you change the name of the video.

•Move

— Lets you move the video from the phone to the memory

card or from the memory card to the phone.

•Lock / Unlock

— Lets you protect the video from being deleted.

• Erase Files

— Erases one or more selected, unlocked videos.

•Video Info

— Displays information about the video, such as the

video

Name

, creation

Date

and

Time, Resolution

, data

Size

, and

the

Duration

5. Use the navigation keys to highlight an option, then press

the key to invoke the selected option.

6. Press the to return to the previous menu, or press

the key to return to standby mode.

My Ringtones

My Ringtones lets you assign ringtones (preloaded and downloaded) for calls, alerts, and as distinctive ringers for Contacts.

1. In standby mode, press the

key ( ), then press

(for

Multimedia

) and for

My Ringtones

. A list of

ringtones appears in the display.

Page 99

Multimedia 96

Tip:

You can also access My Ringtones from:

-A

Set Alarm

screen by selecting the

Ringer

option, highlighting the second (file name) field, pressing the Left or Right navigation key, and selecting

My Ringtones

-The

Edit Contact

screen by selecting the

Ringtone

field, pressing the

Set

(left) soft key ( ), and selecting

My Ringtones

2. Use the navigation keys to highlight a particular ringtone.

•

Press the key to

PLAY

the ringtone.

•

Press the

Info

(right) soft key ( ) to show the file name and file

type.

3. Press the

Set As

(left) soft key ( ) to assign the

highlighted ringtone. The following options appear in the

display:

• Ringtone

— Lets you assign the selected ringtone to incoming

voice calls.

•Contact ID

— Lets you assign the selected ringtone as the

distinctive ringer for a Contact.

• Alert Tone

— Lets you assign the selected ringtone to

All

Messages, Text Message, Picture/Video Message

, or

Voicemail

Msg

Use the navigation keys to highlight an option, then press

the key.

4. When using a downloaded ringtone, press the

Options

(right) soft key ( ) and the following options appear in the

display:

•Lock / Unlock

— Lets you prevent/permit file deletion.

•Erase

— Erases the selected file.

•Erase All

— Erases all downloaded ringtones.

• Ringtone Info

— Displays information about the selected file, such

as the file name, the file type, and the data size.

Use the navigation keys to highlight an option, then press

the key.

5. Press the to return to the previous menu, or press

the key to return to standby mode.

My Sounds

My Sounds lets you record voice memos and lets you assign preloaded and downloaded sound files as ringers for calls, alarms, and other alerts.

1. In standby mode, press the

key ( ), then press

(for

Multimedia

) and for

My Sounds. Record

New

and a list of sound files appears in the display.

Page 100

Tip:

You can also access

My Sounds

from:

-A

Set Alarm

screen by selecting the

Ringer

option, highlighting the second (file name) field, pressing the Left or Right navigation key, and selecting

My Sounds

-The

Edit Contact

screen by selecting the

Ringtone

field, pressing the Set

(left) soft key ( ), and selecting

My Sounds

Note: Recorded sound files (voice memos) do not appear in these lists.

2. Use the navigation keys to highlight the

Record New

option,

then press the key to record a voice memo. (For more

information, refer to “Voice Memo” on page 98.)

3. Press the

Options

(right) soft key ( ).

•

For a recorded sound file, a pop-up menu containing the following options appears in the display:

–

Send

— Lets you send the selected sound file to a specified recipient in

a Picture message.

–

OnlineAlbum

— Lets you send the selected sound file to an Online Album on your wireless provider’s server. For details, contact your wireless provider.

–

Rename

— Lets you rename the sound file.

–

Lock / Unlock

— Lets you protect the sound file from being deleted.

–

Erase All

— Erases all sound files.

–

Sound Info

— Displays information about the sound file, such as the

file name, file size, file type, date, and time.

•

For a preloaded sound file, a pop-up menu containing the following options appears in the display:

–

Send

— Lets you send the selected sound file to a specified recipient in

a Picture message.

–

Set As

— Lets you assign the selected sound file as the

Ringtone

as the

Contact ID

for a Contact or an

Alert Tone

for Text, Picture, or

Voicemail messages.

–

Erase All

— Erases all sound files.

–

Sound Info

— Displays information about the sound file, such as the

file name, file type, and the data size.

•

For a downloaded sound file, the following options appear in the display:

–

Set As

— Lets you assign the selected sound file as the

Ringtone

as the

Contact ID

for a Contact or an

Alert Tone

for Text, Picture, or

Voicemail messages.

–

Rename

— Lets you rename the sound file.

–

Lock / Unlock

— Lets you protect the sound file from being deleted.

–

Erase All

— Erases all sound files.

–

Sound Info

— Displays information about the sound file, such as the

file name, file type, and the data size.

Use the navigation keys to highlight an option and press

the key.

4. Press the to return to the previous menu, or press

the key to return to standby mode.