SAMSUNG MO15ESDS_EDC, MO15ESZS_EDC Service Manual Disassembly & Reassembly

1. Locate the monitor on the table
with face down.

2. Loose the snaps of Hinge cap
through the slot of Cover Rear.

3. Remove the hinge cap.

CONFIDENTIAL

MO15E* 3-1

3 Disassembly and Reassembly

This section of the service manual describes the disassembly and reassembly procedures for the
MO15E* monitors.

WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling

these components.

3-1 Disassembly

Cautions:1. Disconnect the monitor from the power source before disassembly.

2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.

3-1-1 Main Body Disassembly

3 Disassembly and Reassembly

3-2 MO15E*

CONFIDENTIAL

4. Remove 2 flat head screws on
the hinge mounting.
Do not remove the screw for
cable clamp.

5. Disconnect the stand cable from
socket and remove stand
assembly.

6. Remove 2 screws of Cover Rear.

7. Turn the monitor for front-side
up.

8. Remove the Cover Front by
fulling the center area of bezel
and side area in sequence.
If the side area is not loosed
easily, open the snap using ‘-’
driver at the corner of slot of
Cover Rear.