To receive a more complete service,
please register your product at
www.samsung.com/global/register
Page 3
Safety Warnings
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE REAR COVER (or BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CLASS 1 LASER PRODUCT
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION :
WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
This apparatus shall always be connected to a AC outlet with a protective grounding connection.
•
To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains
•
plug shall be readily operable.
CAUTION
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases,
•
shall be placed on the apparatus.
The Mains plug is used as a disconnect device and shall stay readily operable at any time.
•
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
This symbol indicates “dangerous voltage” inside
the product that presents a risk of electric shock
or personal injury.
This symbol indicates important instructions
accompanying the product.
INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
1
Page 4
Precautions
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots
are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become
hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to
the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the power supply,
remove the main plug from the wall outlet, especially when left unused for a long period of time.
ENG
PREPARATION
During thunderstorms, disconnect AC main plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.
Phones
Protect the player from moisture(i.e. vases) , and excess heat(e.
g.fireplace) or equipment creating strong magnetic or electric fields (i.
e.speakers...). Disconnect the power cable from the AC supply if the
player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold
temperatures.
If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and malfunction of the unit.
The battery used with this product contain chemicals that
are harmful to the environment.
Do not dispose of batteries in the general household trash.
2
Page 5
Features
Multi-Disc Playback & FM Tuner
The MM-DG25 combines the convenience of multi-disc playback capability,
including DVD, CD, MP3-CD, CD-R, CD-RW, DivX,JPEG and DVD-R/RW, with a
sophisticated FM tuner, USB HOST all in a single player.
TV Screen Saver Function
The MM-DG25 automatically brightens and darkens the brightness of
the TV screen after 3 minutes in the stop mode.
The MM-DG25 automatically switches itself into the power saving mode
after 20 minutes in the screen saver mode.
Power Saving Function
The MM-DG25 automatically shuts itself off after 20 minutes in the stop mode(only for USB,
DVD).
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital
V I D E O
~
16
surround sound and MPEG-2 video compression technology. Now you can enjoy these
realistic effects in the home, as if you were in a movie theater or concert hall.
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Copy Protection
Many DVD discs are encoded with copy protection. Because of this, you should only connect your
•
DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture
from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain
•
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Features .............................................................................................................................................................................3
Connecting the Speakers ...................................................................................................................................................9
Connecting to a TV .............................................................................................................................................................10
P.SCAN(Progressive Scan) Function .................................................................................................................................12
Connecting the FM Antennas ............................................................................................................................................. 14
Setting the Clock ................................................................................................................................................................15
Playing Media Files using the USB feature ........................................................................................................................21
Displaying Disc Information ................................................................................................................................................ 23
Moving Directly to a Scene/Song .......................................................................................................................................31
Using Disc Menu ................................................................................................................................................................32
Using the Title Menu...........................................................................................................................................................33
SETUP
Setting the Language .........................................................................................................................................................34
Setting TV Screen type.......................................................................................................................................................35
Setting the Password..........................................................................................................................................................38
Setting the DRC (Dynamic Range Compression) ..............................................................................................................39
AV SYNC Setup .................................................................................................................................................................40
RADIO OPERATION
Listening to Radio ...............................................................................................................................................................41
CD RIPPING Function ........................................................................................................................................................43
Canceling the Timer ...........................................................................................................................................................45
Power Sound / Power Bass / Treble Level / Bass Level Function .....................................................................................46
DSP/EQ Function ..............................................................................................................................................................47
Sleep Timer Function / Mute Function................................................................................................................................48
DEMO Function / DIMMER Function / ECO function .........................................................................................................49
Cautions on Handling and Storing Discs ............................................................................................................................ 51
Before Calling for Service ...................................................................................................................................................52
Notes on Discs ...................................................................................................................................................................54
Notes on Terminology ........................................................................................................................................................55
Connect a TV with component video input
jacks to these jacks.
2.
AUX IN
3.
Video Output Connector
Connect the TV's video input jacks (VIDEO
IN) to the VIDEO OUT connector.
4.
FM Antenna Connector
5.
Speaker Connector Terminals
6. Clamp-Wire (Fasten the speaker wires.)
6
Page 9
Description
—Remote Control—
POWER button
TIMER ON/OFF button
OPEN/CLOSE button
DEMO/DIMMER button
DVD button
TUNER button
TIMER/CLOCK button
Number(0~9) buttons
CD RIPPING button
STEP button
CD Skip buttons
VOLUME button
MENU button
Cursor/ENTER button
INFO button
REPEAT button
DSP/EQ button
SLEEP button
MO/ST button
SLOW button
ZOOM button
POWER SOUND button
REPEAT A-B button
AUX button
USB button
CANCEL button
PAUSE button
Play button
SEARCH buttons
MUTE button
TUNING button/Tuning Preset button
AUDIO button
RETURN button
EXIT button
SUBTITLE button
ECHO button
REMAIN button
MIC VOL + button
TUNER MEMORY button
TREB/BASS button
MIC VOL - button
ANGLE button
Stop button
7
Page 10
Insert Remote Batteries
ENG
ENG
PREPARATION
Remove the battery
1
cover in the direction
of the arrow.
Caution
Follow these precautions to avoid leaking or cracking cells:
Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
•
Use the correct type of batteries.Batteries that look similar may differ in voltage.
•
Always replace both batteries at the same time.
•
Do not expose batteries to heat or flame.
•
Insert two 1.5V AAA
2
batteries, paying
attention to the correct
polarities (+ and –).
Replace the battery
3
cover.
Range of Operation of the Remote Control
The remote control can be used up to approximately 23
feet/7 meters in a straight line. It can also be operated at
a horizontal angle of up to 45° from the remote control
sensor.
45
45
8
Page 11
Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and
disconnect the power cord.
The loudspeaker connector terminals are located on the rear of the system.
There are two terminals on the system:
left speaker (marked L)
right speaker (marked R)
To achieve the correct sound quality,insert those speaker connector cables to
the speaker connector terminals of the system.
Position of the DVD Player
Place it on a stand or cabinet shelf,
•
or under the TV stand.
L
Front Speakers
Place these speakers in front of your listening
•
position, facing inwards (about 45°) toward you.
Place the speakers so that their tweeters will be
•
at the same height as your ear.
R
Selecting the Listening Position
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
Directions in Installing Speaker
•
Installation in a place near heating apparatus, under direct lay of light or with high humidity may cause
performance degradation of the speaker.
•
Do not install on the wall or on a high place of pole or other unstable place to prevent any safety accident
caused by falling of the speaker.
•
Do not take the speaker near from TV or computer monitor.
The speaker near the TV or computer monitor may influence the quality of the screen display.
9
Page 12
Connecting to a TV
Please be sure to turn off the power and unplug the power cord before moving or
installing this unit.
Please choose one video connection method.
ENG
CONNECTIONS
Method 1
Connect Video Out on the player to Video
1
In on your TV.
Using Video Out (Good Quality)
Press the TV/VIDEO button on the remote
2
of TV control to set the TV to "VIDEO".
Note
( supplied)
Composite Video: A single video signal that is a composite of the black-and-white
•
information (Y) and the color information (C).
10
Page 13
Connecting to a TV(Con’t)
Please be sure to turn off the power and unplug the power cord before moving
or installing this unit.
Please choose one video connection method.
Method 2
Use this method if your TV have Pr,Pb andY jacks.
If your television is equipped with Component Video inputs,connect a component
video cable from the Pr,Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
Component Video (Best Quality)
11
(not supplied)
Page 14
P.SCAN (Progressive Scan) Function
Unlike regular Interlace Scan, in which two fields of picture information alternate to create the
entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of
information (all lines displayed in one pass) to create a clear and detailed picture without visible
scan lines.
ENG
You can select "Progressive Scan" or "Interlace Scan" for you TV.
Please go to <Setup><Display Setup><Video Output> and set I-SCAN or P-SCAN.
(see the page 35.)
What is Progressive (or Non-Interlaced) Scanning?
Interlaced Scan (1 FRAME = 2 FIELDS)
In interlaced-scan video, a frame consists of two
interlaced fields (odd and even), where each field
contains every other horizontal line in the frame.
The odd field of alternating lines is displayed first, and
then the even field is displayed to fill in the alternating
gaps left by the odd field to form a single frame.
One frame, displayed every 1/25th of a second, contains
two interfaced fields, thus a total of 50 fields are
displayed every 1/50th of a second.
The interlaced scanning method is intended for capturing
a still object.
Progressive Scan (FULL FRAME)
The progressive scanning method scans one full frame of
video consecutively down the screen, line by line.
An entire image is drawn at one time, as opposed to the
interlaced scanning process by which a video image is
drawn in a series of passes.
The progressive scanning method is desirable for dealing
with moving objects.
CONNECTIONS
Note
This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support
•
Progressive Video. (It does not work on TVs with conventional component inputs, i.e., non-progressive
scan TVs.)
Depending on the brand and model of your TV, this function may not work.
•
12
Page 15
Connecting External Components
Connecting an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
Audio Cable
(not supplied)
Connect AUX IN on the player to Audio Out on the external analog component.
1
Be sure to match connector colors.
•
Press AUX to select AUX.
2
AUX’ appears in the display.
‘
•
If the external analog component has
only one Audio Out, connect either left
or right.
13
Page 16
Connecting the FM Antennas
FM Antenna (supplied)
ENG
CONNECTIONS
Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
1
Slowly move the antenna wire around until you find a location where reception is good, then fasten it
2
to a wall or other rigid surface.
Note
• This unit does not receive AM broadcasts.
14
Page 17
Setting the Clock
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
Switch the system on
by pressing POWER
1
button.
When the correct
hour is displayed,
press ENTER.
4
The minutes flash.
Increase the minutes :
•
Decrease the minutes :
•
Note
You can display the time, even when you are using another function, by pressing
•
TIMER/CLOCK once.
You can also use on the panel front instead of buttons in step 3,4.
•
Press TIMER/CLOCK
twice.
2
"CLOCK" is displayed.
•
When the correct
time is displayed,
5
press ENTER.
"TIMER" appears in the display.
•
The current time is now set.
•
Press ENTER.
3
The hour flashes.
Increase the hours :
•
Decrease the hours :
•
Checking the Remaining Time
Press the REMAIN button.
For checking the remaining time of a title or chapter
•
being played.
Each time the REMAIN button is pressed ,
the time is displayed as below:
DVD
TITLE REMAIN TIME
CHAPTER REMAIN TIME
ELAPSED TIME
15
CDMP3
Press the REMAIN button.
If you press the REMAIN button,
the remaining time is displayed.
To cancel this function, press the
REMAIN button again.
Page 18
Disc Playback
Press OPEN/CLOSE button to open the
disc tray.
1
Load a disc.
Place a disc gently into the tray with the disc’s label facing up.
•
2
3
Note
Press OPEN/CLOSE button to close the disc
tray.
ENG
OPERATION
For mixed discs, the play order is as below:MP3/WMA
•
Depending on the content of the disc, the initial screen may appear different.
•
Depending on the recording mode, some MP3-CDs cannot be played.
•
For CD discs, you can press the numeric buttons to select the track, when you
•
press the numeric buttons after 3 seconds, the p
Table of contents of a MP3-CD varies depending on the MP3 track format recorded
•
on the disc.
DTS Audio is not supported.
•
DVD Audio Disc is not supported.
•
DIVX
JPEG.
layback starts automatically.
To stop playback, press STOP button during playback.
If pressed once, the stop position will be stored in memory. If PLAY ( ) button
•
is pressed, playback resumes from the stop position. (This function works only with
DVDs.)
If pressed twice, “STOP” is displayed, and if PLAY ( ) button is pressed,
•
playback starts from the beginning.
To temporarily pause playback, press PAUSE button
during playback.
To resume playback, press PLAY( ) button again.
•
16
Page 19
MP3/WMA-CD Playback
Use
Load the MP3/WMA
disc.
1
to select the album,
and then press the
2
ENTER button.
The MP3/WMA menu screen will appear
•
and playback will start.
The appearance of the menu depends
•
on the MP3/WMA disc.
WMA-DRM files cannot be played.
•
To change the
album, use
to select another
album in Stop mode,
3
and then press the
ENTER button.
To select another album and track,
•
repeat Steps 2 and 3 above.
Depending on the recording mode, some MP3/WMA-CDs may not be played.
•
Note
Table of contents of a MP3-CD varies depending on the MP3/WMA track
•
format recorded on the disc.
Use to select the track.
•
Press the STOP
button to stop
4
playback.
17
Page 20
JPEG File Playback
Images captured with a digital camera or camcorder, or JPEG files on a PC can be
stored on a CD and then played back with this DVD player.
Rotate/Flip Function
Press Cursor , , , buttons during playback.
JPEG
ENG
button: Flip Vertically
button: Rotate 90°
Counterclockwise
Original Image
button: Flip Vertically
button: Rotate 90° Clockwise
Zoom/Auto play Function
Press INFO button during playback, TV displays as below:
1. Use , to select
press the button, your selection will rotate as clockwise.
2. Use , to select
press the button, your selection will change as below: x2
3. Use , to select
below:
icon, and then press ENTER button, each time you
icon, and then press ENTER button, each time you
x4 x2 Off.
icon, and then press ENTER button, TV displays as
OPERATION
Press ENTER button to select the time space for
4. Press STOP button to cancel this function.
playing the pictures.
18
Page 21
DivX Playback
Skip Forward/Back
During playback, press the button.
Go to the next file whenever you press button, if there are over
•
2 files in the disk.
Go to the previous file whenever you press button, if there are over
•
2 files in the disk.
Fast playback
Press button.
Each time the button is pressed during playback,
•
the playback speed changes as follows:
To resume normal playback, press PLAY (
•
) button.
19
Page 22
5 Minutes Skip function
During playback, press the , button.
Go to the screen 5 minutes after whenever you press button.
•
Go to the screen 5 minutes earlier whenever you press button.
•
For MPG format files, 5 minute skip function is not supported.
•
Note
Audio Display
Press the AUDIO button.
ENG
If there are multiple audio tracks on a disc, you can toggle between them.
•
Each time you press the button, your selection will toggle between AUDIO(OFF, 1/1, 1/2 ...).
•
Subtitle Display
Press the SUBTITLE button.
Each time you press the button, your selection will changed as below:
•
SUBTITLEKORSUBTITLEOff
If the disc has only one subtitle file, it will be played automatically.
•
Up to 8 subtitle languages are supported.
•
DivX Feature Table
DivX Supported
Avi files are used to contain the audio and video data; these must be stored on CD in the ISO 9660 format.
SPEC
VIDEO Compatibility DivX3.11 Up to the latest VERSION
AUDIO Compatibility MP3 CBR : 8kbps~320kbps
AC3 CBR : 32kbps~640kbps
WMA
CBR1:Stereo case:48kbps~384kbps
CBR2:Mono case:64kbps~192kbps
MPEGs containing DivX can be divided into Video and Audio.
Video compatibility : All versions of DivX later than 3.11 (including
•
the latest 5.1) are supported. In addition, XviD is supported.
Audio compatibility : MP3s encoded at bit rates from 8kbps to
•
320kbps, AC3s from 32kbps to 640kbps, and WMAs from 48kbps to
384kbps are supported.
In addition, for subtitles, this unit will support Text format (SMI).
•
OPERATION
Note
When playing the DivX disk, you can play the file with extension of AVI only.
•
Among the available DivX audio formats, DTS Audio is not supported.
•
When burning a subtitle file to a CD-ROM with your PC, be sure to burn it as an SMI file.
•
MPEG 1 Layer 1 (MP1) is not supported.
•
20
Page 23
Playing Media Files using the USB feature
You can connect and play files from external USB storage devices such as MP3 players,
USB flash memory, etc. using the player's USB function.
Connect the USB
1
cable.
Press the FUNCTION
button on the main set
2
or the USB button on
the remote control to
select the USB mode.
“ USB” appears on the display screen
•
and then disappear.
USB SORTING screen appears on the
•
TV screen and the saved file is played.
To stop playback, press the STOP ( ) button.
Note
Video files (DivX, MPEG, etc.) are supported.
•
To prevent the loss of data saved in the USB device, please turn the unit off or
•
switch it to another mode before disconnecting the USB cable.
The play order is as follow: MP3/WMA
•
DIVX
JPEG.
Skip Forward/Back
During playback, press the or , button.
When there is more than a file, when you press the , button, the next file is selected.
•
When there is more than a file, when you press the , button, the previous file is selected.
•
Fast playback
To play back the disc at a faster speed, press or button
during playback.
Each time you press either button, the playback speed will change as follows:
•
x
To resume normal playback, press PLAY (
•
2
x
4
x
8 or
x
2
x
x
4
) button.
8
21
Page 24
USB Host Specifi cation
• Supports USB 1.1 or USB 2.0 compliant devices.
• Supports devices connected using the USB A type cable.
USB Host Specifi cation
Non-compliance
Operational Limitations
• Supports UMS (USB Mass Storage Device) V1.0 compliant devices.
• Supports the device of which the connected drive is formatted in the FAT(FAT, FAT16,
FAT32) fi le system.
•
Does not support a device that requires installing a separate driver on the PC (Windows).
• Does not support connection to a USB hub.
•
A USB device that is connected using the USB extension cable may not be recognized.
• A USB device requiring a separate power source needs to be connected to the player
with the separate power connection.
• If the connected device has multiple drives (or partitions) installed, only one drive
(or partition) can be connected.
• A device supporting USB 1.1 alone may cause a difference in the picture quality,
depending on the device.
ENG
Compliant Devices
USB Storage Device1.
MP3 Player2.
Digital Camera3.
Removable HDD4.
Removable HDDs equipped with less than 160 Gbytes are supported. Removable HDDs •
equipped with 160Gbytes or more may not be recognized, depending on the device.
If the connected device does not work due to insuffi cient power supply, you can use a separate •
power cable to supply power so that it can work properly. The connector of the USB cable may
differ, depending on the manufacturer of the USB device.
USB card Reader: One slot USB card reader and Multi slot USB card reader.5.
Depending on the manufacturer. the USB card reader may not be supported.•
If you install multiple memory devices into a multi card reader, you may experience problems.•
Compliant File Formats
FormatFile nameFile extensionBit rateVersionPixel
Still PictureJPGJPG .JPEG––640x480–
MP3.MP38~320kbps––44.1kHz
Music
WMA.WMA
MovieDivX.AVI4Mbps
Stereo:48~384kbps
Mono:64~192kbps
V8–44.1kHz
DivX3.11~
DivX5.1, XviD
720x48044.1KHz~48KHz
OPERATION
Sampling
Frequency
CBI (Control/Bulk/Interrupt) is not supported.•
Digital Cameras that use PTP protocol or require additional program installation when connected to a •
PC are not supported.
A device using NTFS fi le system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) fi le •
system is supported.)
Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.•
•
MPEG 1 Layer 1 (MP1) is not supported.
22
Page 25
Displaying Disc Information
You can view playback information on the disc on the TV screen.
Press INFO button.
•
Press Cursor , buttons select the desired item.
DVD
What is a Title?
•
A movie contained in a DVD disc.
What is a Chapter?
•
Each title on a DVD disc is divided into several smaller sections called "chapters".
appears on the TV screen!
•
If this symbol appears on the TV screen while buttons are being operated, that
operation is not possible with the disc currently being played.
What is a Track (File)?
•
A section of video or a music file recorded on a CD, or MP3-CD.
Display disappears
Note
Depending on the disc, the disc
•
information display may appear different.
23
Page 26
Fast/Slow Playback
ENG
Fast Playback
DVD
CD
Press buttons.
Each time you press either button during playback,
•
the playback speed changes as follows:
DVD
CD
16
32
128
MP3
16
32
128
MP3
OPERATION
To resume normal playback, press PLAY (
•
) button.
Slow Playback
Press SLOW button.
Each time the button is pressed during playback,
•
the playback speed changes as follows:
DVD
In Pause mode or Step mode or Slow mode, you
•
DivX
can use the button to select as below:
To resume normal playback, press PLAY (
•
During fast playback of a CD or MP3-CD, sound is not heard.
Note
•
No sound is heard during slow playback and step motion playback.
•
) button.
24
Page 27
Skipping Scenes/Songs
DVDMP3
CD
Briefly press .
Each time the button is pressed briefly during playback, the previous or next chapter, track, or directory (file) will
This function allows you to view the same scene in different angles.
DVD
Press Cursor ,
Press ANGLE
button.
1
1/3
buttons or numeric
buttons to select the
2
desired angle.
Each time the button is pressed,
•
the angle changes as follows:
ENG
OPERATION
1/3
2/3
Note
3/3
The Angle function works only with discs on which multiple angles
•
have been recorded.
26
Page 29
Repeat Playback
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
DVDCDMP3DIVX
Press REPEAT button.
Each time the button is pressed during playback, the repeat playback
•
mode changes as follow:
DVD
Press the REPEAT button or cursor ,button to select one mode
•
then press ENTER button.
Select
•
Select
•
Select
•
Select
•
: Cancel Repeat playback.
: Repeat playback one Chapter.
: Repeat playback one Title.
: Repeat playback A-B.
Trac k
Folder
Off
Repeat Playback Options
Track
Repeatedly plays the selected track.
Folder
Repeatedly plays all tracks in the
selected folder.
Disc
Repeatedly plays the entire disc.
Trac k
Folder
Disc
Shuffle
CDMP3DIVX
Trac k
Disc
Shuffle
Off
Off
Shuffle
Plays tracks in random order.
(Each track can be played one time.)
Off
Cancels Repeat Playback.
27
Page 30
AB Repeat Playback
DVDCDMP3DIVX
ENG
Press the REPEAT A-B
button at the point where you
1
want repeat play to start (A).
'RPT A-' is displayed.
To return to nomal play, press
the REPEAT A-B button again.
3
'RPT OFF-' is displayed.
2
'RPT A-B' is displayed.
Press the REPEAT A-B
button at the point where you
want repeat play to stop (B).
OPERATION
• The A-B Repeat function does not operate with JPEG disc.
• The time space of point A and B should be more than 5 seconds.
28
Page 31
Zoom Function
This function allows you to enlarge a particular area of the displayed image.
Zoom (Screen Enlarge) Function
DVD
Press ZOOM
button.
1
Press ENTER
button.
3
DivX
JPEG
Press Cursor , ,
, buttons to
move to the area
2
you want to enlarge.
29
Each time the button is pressed, the
•
zoom level changes as follow:
DVD
DivX
2 x 4 x OFF.
JPEG
2 x 4 x 2 x OFF.
Page 32
Selecting Audio/Subtitle Language
ENG
Audio Language Selection Function
Press INFO button.
1
Subtitle Language Selection Function
Press INFO button.
1
DVD
Press Cursor ,
buttons to select the
Audio and then press
2
ENTER button.
Note
DVD
Press Cursor ,
buttons to select the
Subtitle and then press
2
ENTER button.
Press Cursor ,
or numeric buttons to select the
desired Audio language and then
3
press ENTER button.
Depending on the number of languages on a DVD
•
disc, a different audio language (ENGLISH,
SPAIN,FRENCH, etc.) is selected each time the
button is pressed.
Press Cursor ,
or numeric buttons to select the
desired Subtitle language and
3
then press ENTER button.
OPERATION
Note
You can use the AUDIO or SUBTITLE button on the remote control to select an audio or subtitle language.
•
Depending on the disc, the Subtitle and Audio Language functions may not work.
•
When you use AUDIO button to select "DTS", sound is not heard, and the TV displays as below:
•
CHI DOLBY DIGITAL 5.1 CH
AUDIO
30
Page 33
Moving Directly to a Scene /Song
DVD
Press INFO button.
Moving to a Title/Chapter
1
Moving to a Title/Chapter
Press Cursor ,
or numeric buttons to
select the desired part and
3
then press ENTER button.
Moving to a Specific Time
4
Press Cursor ,
buttons to select the
Title/Chapter.
2
Press Cursor ,
buttons to select the
Time.
31
Moving to a Specific Time
Press the numeric
buttons to select the
desired time and then
5
press ENTER button.
Note
You can press on the
•
remote control to move directly to the
desired title, chapter.
Depending on the disc, you may not
•
be able to move to the selected title or
time.
Page 34
DVD
Using Disc Menu
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
ENG
In stop mode, press
MENU button.
Disc Menu
Press Cursor ,
buttons to select the
desired item and then
press ENTER button.
Press Cursor , buttons
to move to ‘DISC MENU’
and then press ENTER
21
button .
Disc Menu
Press Cursor ,
, buttons to select
the desired item and
43
then press ENTER
button.
OPERATION
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Press EXIT button to exit the setup screen.
32
Page 35
Using the Title Menu
For DVDs containing multiple titles, you can view the title of each movie.
Depending on the disc, this function may either not work at all or may work differently.
DVD
In stop mode, press
MENU button.
1
Disc Menu
Press Cursor ,
button to move to
‘Title Menu’ and
2
then press ENTER
button.
Press Cursor ,
buttons to select the
desired item and then
press ENTER button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Press EXIT button to exit the setup screen.
Press Cursor ,
, buttons to select
the desired item and
43
then press ENTER
button.
33
Page 36
Setting the Language
OSD language is set to English by default.
ENG
In stop mode, press
MENU button.
Disc Menu
21
Press Cursor ,
button to select the
desired language and then
4
press ENTER button.
Once the setup is complete, if the language
•
was set to English, OSD will be displayed in
English.
Press Cursor ,
button to move to
‘Setup’ and then
press ENTER button.
3
Press Cursor ,
button to select the
desired item and then
press ENTER button.
OPERATION
Selecting the
Audio Language
Selecting the
OSD Language
Selecting the Subtitle Language
(recorded on the disc)
Selecting the Subtitle Language
Selecting the
Disc Menu Language
(recorded on the disc)
(recorded on the disc)
(recorded on the disc)
If the language you selected is
*
not recorded on the disc, menu
language will not change even if
you set it to your desired
language.
Press MENU or EXIT button to exit the setup screen.
Press RETURN button to return to the previous level.
34
Page 37
Setting TV Screen type
Press Cursor
In stop mode, press
MENU button.
Disc Menu
button to move to
‘Setup’ and then
21
press ENTER button.
Press Cursor ,
button to move to
‘Display Setup’ and
3
then press ENTER
button.
Press Cursor ,
button to move to
‘Screen Messages’
5
and then press
ENTER button.
• You can select 'On' or 'Off'.
On: you can see the screen messages.
Off: you can't see the screen messages.
4
• You can select '4:3 Letter Box', '4:3
6
• You can select 'I-SCAN' or 'P-SCAN'.
(see the page 12 about P-SCAN or
I-SCAN mode.)
Press Cursor ,
button to 'Tv Aspect'
and then press
ENTER button.
Pan&Scan' or '16:9 Wide' mode for
your TV.
Press Cursor ,
button to 'Video
Output' and then
press ENTER button.
35
Page 38
ENG
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen size, you should adjust the aspect ratio to fit your TV or monitor.
For a standard TV, select either "4:3LB" or "4:3PS" option according to
personal preference. Select "16:9" if you have a wide screen TV.
16:9 Wide
4:3LB
(4:3 Letter box)
4:3PS
(4:3 Pan&Scan)
Note
• If a DVD is in the 4:3 ratio, you cannot view it in wide screen.
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.
: Select this to view a 16:9 picture in the full-screen
mode on your wide screen TV.
• You can enjoy the wide screen aspect.
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
• Black bars will appear at the top and bottom of the screen.
SETUP
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
• You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Press EXIT button to exit the setup screen.
36
Page 39
Setting Parental Controls (Rating Level)
Use this to restrict playback of adult or violent DVDs you do not want children to view.
In stop mode, press
MENU button.
Disc Menu
Press Cursor , button
to select the 'Rating Level'
and then press ENTER
4
button.
If you have selected Level 6, you
•
cannot view DVDs with Level 7 or
higher.
The higher the level, the closer the
•
content is to violent or adult material.
Press Cursor
button to move to
‘Setup’ and then
21
press ENTER button.
Enter the password
and then press
5
ENTER button.
The password is set to "7890" by default.
•
Once the setup is complete, you will be
•
taken to the previous screen.
Press Cursor button
to move to ‘Parental
Setup’ and then press
3
ENTER button.
37
Note
This function works only if a DVD disc
•
contains the rating level information.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Press EXIT button to exit the setup screen.
Page 40
Setting the Password
You can set the password for the Parental (rating level) setting.
ENG
In stop mode, press
MENU button.
Disc Menu
Press Cursor , button
to select the 'Change
Password' and then press
4
ENTER button.
Press Cursor
button to move to
‘Setup’ and then
21
press ENTER button.
Enter the password
and then press
5
ENTER button.
Enter the old password, a new
•
password, and confirm new password.
The setting is complete.
•
Press Cursor button to
move to
Setup’
3
ENTER button.
‘Parental
and then press
SETUP
Press RETURN button to return to the previous level.
Press CANCEL button to cancel the error numeric when you inputting password.
Press MENU button to exit the setup screen.
38
Page 41
Setting the DRC
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
In stop mode, press
1
MENU button.
Disc Menu
(Dynamic Range Compression)
Press Cursor
button to move to
2
‘Audio’ and then press
ENTER button.
Press Cursor , button
to select the 'DRC' and
3
then press ENTER button.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
4
•
Press Cursor , to
adjust the ‘DRC’.
You can set the DRC between 0 and 8.
Set it to the optimal status.
39
Press EXIT button to exit the setup screen.
Page 42
AV SYNC Setup
Video may look slower than the audio if it is connected with digital TV.
In this case, adjust the delay time of audio to optimal status to fit the video.
ENG
3
In stop mode, press
MENU button.
Disc Menu
Press Cursor , buttons
to move to ‘AV-SYNC’ and
then press ENTER button.
Press Cursor , buttons
to move to ‘Audio’ and then
21
press ENTER button.
Press Cursor , buttons
to select the Delay Time of
AV-SYNC and then press
4
the ENTER button.
SETUP
You can set the audio delay time between 0 ms
•
and 300 ms. Set it to the optimal status.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
40
Page 43
Listening to Radio
You can listen to the chosen band (FM broadcast stations) by using either the
automatic or manual tuning operation.
Remote Control Unit
Press TUNER
button.
1
Main Unit
Press the
FUNCTION button
to select the FM
band.
Tune in to the
2
Automatic Tuning 1
press
the preset station.
Automatic Tuning 2
TUNING or
search the band.
Manual Tuning
TUNING or
higher frequency.
desired station.
Press the STOP ( ) button
to select PRESET and then
TUNING or
button to select
Press the STOP
select "AUTO " and then press
button to automatically
Press STOP
MANUAL and then briefly press
to tune in to a lower or
( )
Select a broadcast
station.
21
Automatic Tuning 1
press
station.
Automatic Tuning 2
band.
Manual Tuning
press
higher frequency.
Press the STOP ( ) button
to select PRESET and then
button to select the preset
Press the STOP
select "AUTO " and then press
button to automatically search the
Press STOP
MANUAL and then briefly
to tune in to a lower or
( )
( )
button to
to select
( )
button to
to select
41
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
•
Page 44
Presetting Stations
You can store up to:
15 FM stations
Example: Presetting FM 89.1 in the memory
ENG
Press the TUNER
button and select
the FM band.
MHz
kHz
Press
TUNING
or
to select
preset number.
You can select between 1 and
•
15.
Press
TUNING
or to select
213
"89.10".
Refer to Step 2 on page 41
•
to automatically or manually
tune in to a station.
MHz
kHz
Press the TUNER
MEMORY button.
54
If you can’t press “TUNER MEMORY” in 5
•
seconds, the preset disappears and “FM”
displays.
6
Press the TUNER
MEMORY button.
MHz
kHz
To preset another
station, repeat
steps 2 to 5.
RADIO OPERATION
MHz
kHz
MHz
kHz
42
Page 45
CD RIPPING Function
You can rip a compact disc as a MP3 file on the USB
This feature enables you to ripping with the start of the disc or track of your choice.
Switch the system
on by pressing
1
POWER.
2
Press CD
RIPPING button
on remote control
4
to starting ripping.
If the system is playing state, p ¡ress this button,
“TRACK RIPPING” is displayed and CD
RIPPING starts.
If the system is playing state, p ¡ress and hold this
button, “FULL CD RIPPING” is displayed and CD
RIPPING starts.
During CD ripping, do not disconnect USB
¡
device.
Note
Don’t disconnected USB and AC Cord during CD-Ripping. This may cause
◆
the file damage. If you want to stop CD-Ripping during CD-Ripping, you must
press stop Key first and after the CD Stopped, then you can remove the USB
device.
If you disconnected USB device when CD Ripping, the main unit will be
◆
power off and you may not delete the ripped file, In this case, please connect
the USB on the PC and backup the USB data on the PC first and then
formate the USB device .
When the USB memory is not enough, it will be displayed “RIPPING
◆
ERROR”.
DTS-CD can’t for CD Ripping.
◆
With external HDD, FAT format the USB can be CD Ripping, but not NTFS.
◆
The CD Ripping function of this product does not support all USB devices.
When you use CD high speed search function or in the Pause or Stop mode,
◆
the CD Ripping can’t work.
During CD Ripping, do not deal impact.If is shocked while CD Ripping, CD
◆
Ripping maybe disengage.
Sometimes, some of USB devices, CD Ripping time is long.
◆
In program mode, you can't use CD RIPPING function.
◆
When CD Ripping completes or Stops, the CD will reload.
◆
5
After CD-Ripping,a directory named
“RIPPING FOLDER” will be created in your
device.The file name is same with the disc.
Connect the
USB.
To stop ripping, press
STOP(
)button.and
then automatically
create and save as
the MP3 file.
Load a compact
disc(Digital
3
the CD door.
button to close the CD door.
to select the desired song.
Audio).
Press the OPEN/CLOSE button to open
Insert a CD and press the OPEN/CLOSE
Use the CD selection (
) buttons
43
Page 46
Timer Function
The timer enables you to switch the system on or off at specific times.
•
If you no longer want the system to be switched on or off automatically, you must cancel the timer.
•
Before setting the timer, check that the current time is correct.
•
For each step, you have a few seconds to set the required options.
•
If you exceed this time, you must start again.
Example: You wish to wake up to music every morning.
ENG
Switch the system
on by pressing
1
POWER.
Set the timer
switch-on time.
a. Set the hour by pressing or
button.
b. Press ENTER .
The minutes flash.
•
c. Set the minutes by pressing or
button.
d. Press ENTER.
OFF TIME is displayed (instead
•
of the equalizer symbols) for a few
seconds, followed by any switchoff time already set; you can now
set the timer switch-off time.
Press TIMER/CLOCK until
TIMER is
2
displayed.
Set the timer
switch-off time.
54
a. Set the hour by pressing or
button.
b. Press ENTER.
The minutes flash.
•
c. Set the minutes by pressing or
button.
d. Press ENTER.
VOL 10 is displayed, where 10
•
corresponds to the volume
already set.
Press the ENTER
button.
3
ON TIME is displayed (instead
•
of the equalizer symbols) for a
few seconds, followed by any
switch-on time already set; you
can set the timer switch-on time.
Press or button
to adjust the volume
level and press
6
ENTER.
The source to be selected is
•
displayed.
Press or button
to select the source to
be played when the
system switches on.
TUNER (radio) :
•
a Press ENTER.
b Select a preset station by pressing
or .
DVD/CD (compact disc) :
•
Load on or more compact disc.
USB :Insert a USB.
•
If the timer switch on and off times are identical, the word ERROR is displayed.
•
Note
If there is no disc or usb, when you select the “DVD, USB, it will automatically change to
•
“TUNER”.
Press ENTER to
confirm the timer.
87
Press POWER to
set the system to
standby mode.
9
is displayed to the top right of
•
the time, indicating that the timer
has been set.
The system will switch on and
•
off automatically at the required
times.
44
MISCELLANEOUS
Page 47
Canceling the Timer
After having set the timer, it will start automatically as shown by the TIMER indication on the
display. If you no longer wish to use the timer, you must cancel it.
To cancel the timer, press TIMER ON/OFF once.
•
is no longer displayed.
To resume the timer, press TIMER ON/OFF again.
•
is displayed again.
Note
You can cancel the timer while the power is on or while the player is in standby.
•
45
Page 48
Power Sound/Power Bass/
Treble Level/Bass Level Function
POWER SOUND/POWER BASS Function
Your micro-compact system is equipped with the function of POWER SOUND mode .
The function of POWER SOUND mode amplifies bass and improves high key or bass twice as much for
you to appreciate powerful real sound.
Your micro-compact system has a bass amplification function called SBS (Super Bass Sound).
This function makes the sound more powerful and real.
ENG
Press the P.SOUND button.
Each time the button is pressed, the selection changes
as follows: P.SOUND P.BASS OFF
Treble Level Function
Treble Control function stresses high tones providing
thudding sound effects.
Press TREB/BASS button ,
TREB 00
Press the button to select from TREB -04 to
•
TREB 04.
You can select the level of high tones you desire.
•
is displayed.
Bass Level Function
When CD Ripping,the P.SOUND, P.BASS
function can’t work and the P.SOUND,
P.BASS automatically covert to “OFF”
mode.
BASS function stresses low tones providing thudding sound
effects.
Press TREB/BASS button ,
BASS 00
Press the button to select from BASS -04 to
•
BASS 04.
You can select the level of low tones you desire.
•
is displayed.
MISCELLANEOUS
46
Page 49
DSP/EQ Function
Selecting DSP/EQ
Your mini-compact system is equipped with a
preset equalizer that allows you to choose the
most appropriate balance between treble and
bass frequencies, according to the type of
music you are listening to.
Press DSP/EQ on the remote control until
the required option is selected.
To obtain a... Select...
Normal balance (linear) PASS
Balance suitable for pop music POP
Balance suitable for rock music ROCK
Balance suitable for class CLASSIC
Balance suitable for jazz JAZZ
Balance suitable for s.bass S.BASS
When CD Ripping,the DSP/EQ function can’t work and the
DSP/EQ automatically covert to “PASS” mode.
47
Page 50
Sleep Timer Function / Mute Function
ENG
Sleep Timer Function
You can set the time that the DVD player will shut itself off.
Press SLEEP button.
Each time the button is pressed, the selection changes as follows:
•
90 MIN 60 MIN 45 MIN 30 MIN 15 MIN SLEEPOFF.
To confirm the sleep timer setting, press SLEEP button.
The remaining time before the DVD player will shut itself off is displayed.
•
Pressing the button again changes the sleep time from what you have set
•
earlier.
To cancel the sleep timer, press SLEEP button until
SLEEPOFF appears on the display.
Mute Function
This is useful when answering a doorbell or telephone call.
Press MUTE button.
MUTE ’ appears in the display.
•
‘
•
To switch the sound back on , press MUTE again or press the VOLUME
buttons.
MISCELLANEOUS
48
Page 51
DEMO Function / DIMMER Function /
ECO Function
DEMO Function
You can view the various functions available on your system.
Press DEMO/DIMMER button.
The various functions available are listed in turn on the display.
•
All these functions are described in detail in this booklet.
•
For instructions on how to use them, refer to the appropriate sections.
DIMMER Function
You can adjust the brightness of the display on the main unit so it won't
interfere with your movie viewing.
Press DEMO/DIMMER button.
Each time the button is press, the brightness changes as follows:
•
DIMMER ON(Dim)DIMMER OFF(Bright).
Note
Press any buttons to cancel DEMO function.
When you turn off the main unit, DEMO function will be auto start
after 10 senconds. if you want to cancel this DEMO function, press
DEMO/DIMMER button again.
ECO Function
You can save the power consumption while the unit is
turned off (on standby)
In Standby mode, press and
hold the POWER button for
longer than 3 seconds.
Result: ECO displays and the main set automatically switches itself into
•
the power saving mode.
49
Page 52
ENG
Connecting Headphones/Microphone
You can connect a set of headphones to your micro component system so that you can listen
to music or radio programmers without disturbing other people in the room. The headphones
must have a 3.5ø jack or an appropriate adapter.
You can also insert microphone to sing along with your favorite Cds.
Connect the headphones
to the PHONES jack on
Plug a microphone with a 3.5ø MIC
jack into the Mic terminal.
the front panel.
The loudspeakers are no longer used to
•
output the sound.
Note
Prolonged use of headphones at a high volume may damage your hearing.
•
Connect one Microphone.
•
Press the MIC VOL button to adjust the MIC level.
•
Press the ECHO button to select ECHO1,ECHO2, and ECHO OFF.
•
MISCELLANEOUS
50
Page 53
Cautions on Handling and Storing Discs
Small scratches on the disc may reduce sound and picture quality or cause breaks in
playback. Be especially careful not to scratch discs when handling them.
Handling discs
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
When cleaning, wipe gently from the inside to the outside of the disc.
•
Note
Condensation may form if warm air comes into contact with cold parts
•
inside the player. When condensation forms inside the player, the player
may not operate correctly. If this occurs, remove the disc and let the
player stand for 1 or 2 hours with the power on.
51
Page 54
Before Calling for Service
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not
listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact
the nearest authorized dealer or Samsung Electronics Service Center.
SymptomCheck/Remedy
ENG
Disc tray does not open.
Playback does not start.
The remote control does
not work.
Playback does not start
immediately when the Play/
Pause button is pressed.
Sound is not produced.
Is the power cord plugged securely into the outlet?
•
Turn off the power and then turn it back on.
•
Check the region number of the DVD.
•
DVD discs purchased from abroad may not be playable.
CD-ROMs and DVD-ROMs cannot be played on this DVD
•
player.
Make sure that the rating level is correct.
•
Is the remote control being operated within its operation range of
•
angle and distance?
Are the batteries exhausted?
•
Are you using a deformed disc or a disc with scratches on
•
the surface?
Wipe the disc clean.
•
No sound is heard during fast playback, slow playback, and step
•
motion playback.
Are the speakers connected properly? Is the speaker setup
•
correctly customized?
Is the disc severely damaged?
•
Picture does not appear, sound
is not produced, or the disc
tray opens 2 to 5 seconds later.
• Disc is rotating but no
picture is produced.
• Picture quality is poor and
Was the DVD player suddenly moved from a cold place to a warm
•
one? When condensation forms inside the player, remove the disc
and let the player stand for 1 or 2 hours with the power on. (You
can use the player again after condensation disappears.)
Is the TV power on?
•
Are the video cables connected properly?
•
Is the disc dirty or damaged?
•
A poorly manufactured disc may not be playable.
•
picture is shaking.
MISCELLANEOUS
52
Page 55
SymptomCheck/Remedy
Audio language and
subtitles do not work.
Audio language and subtitles will not work for DVDs not containing
•
them. And depending on the disc, they may work differently.
Menu screen does not appear even
Are you using a disc that does not contain menus?
•
when the menu function is selected.
You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
Aspect ratio cannot be
changed.
Can't receive radio
broadcast.
The main unit is not working.
•
(Example: The power goes out or
strange noise is heard.)
• The DVD player is not
working normally.
•
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
Is the antenna connected properly?
•
If the antenna's input signal is weak, install an external FM
•
antenna in an area with good reception.
Turn off the power and hold the STOP button on the main unit
•
for longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
The password for rating
level has been forgotten.
53
While the player is in the No Disc mode, hold the main unit's STOP
•
button for longer than 5 seconds. “INITIAL” appears on the display and
all settings will return to the default values.
Press the POWER button.
•
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
Page 56
Notes on Discs
ENG
Disc Recording Format
This product does not support Secure (DRM) Media files.
CD-R Discs
• Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the condition of
the disc.
• Use a 650MB/74 minute CD-R disc. Do not use CD-R discs over 700MB/80 minute as they may not be played back.
• Some CD-RW (Rewritable) media, may not be playable.
• Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may not be
able to fully play the disc.
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be played.
• Only a consecutively written multisession disc can be played. If there is a blank segment in the Multisession disc, the disc
can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g., 32Kbps ~
320Kbps), the sound may skip during playback.
• A maximum of 500 tracks can be played per CD.
• A maximum of 300 folders can be played per CD.
CD-R JPEG Discs
• Only files with the "jpg" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc, the disc
can be played only up to the blank segment.
• A maximum of 9,999 images can be stored on a single CD.
• When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
DVDR/RW, CD-R/RW DivX Discs
• Software updates for incompatible formats are not supported.
(Example : QPEL, GMC, resolution higher than 720 x 480 pixels, etc.)
• Sections with a high frame rate might not be played while playing a DivX file.
MISCELLANEOUS
DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified or DivX
Ultra Certified device that plays DivX video.
54
Page 57
ANGLE
Notes on Terminology
Recorded onto some DVD discs are scenes which have been simultaneously shot
from a number of different angles (the same scene is shot from the front, from the
left , from the right , etc.).
With such discs, the Angle button can be used to change the angle of view for
specific scenes.
CHAPTER
NUMBER
DVD
PCM
PBC
(PLAYBACK
CONTROL)
REGION NUMBER
SUBTITLES
TITLE NUMBER
TRACK NUMBER
These numbers are recorded on DVD discs. A Title is subdivided into many
sections, each of which is numbered, and specific parts of the video can be
searched quickly using these numbers.
A high-density optical disc on which high-quality pictures and sound have been
recorded by means of digital signals. Incorporating a new video compression
technology (MPEG-2) and high-density recording technology, a DVD disc
comprises two 0.6 mm thick discs bonded together.
An acronym for Pulse Code Modulation - another name for digital audio.
This is recorded on a video CD (version 2.0). Selected scenes or information can
be chosen from the menu displayed on the TV monitor.
Both the DVD player and DVD discs are encoded with a region number.
If the region number on the DVD disc does not correspond to the region number
of the DVD player, the player cannot play the disc.
Translated appearing at the bottom of the screen. A DVD disc can contain up to
32 subtitle languages.
These numbers are recorded on DVD discs. When a disc contains two or more
movies, these movies are numbered as Title 1, Title 2, etc.
These numbers are assigned to the tracks which are recorded on video and
audio CDs. They enable specific tracks to be located quickly.
VIDEO CD
55
Contains recordings of pictures and sound whose quality is roughly comparable
to that of video tape.
This player also supports video CDs with playback control (version 2.0).
5.1 (or 6) Channel Digital Surround sound reproduced from DVDs and LDs
recorded as a digital signals (with disc marking). With better sound quality,
dynamic range, and directionality than traditional Dolby surround technology, you
can enjoy dynamic, realistic sound.
Page 58
Specifications
RADIO
FM
Signal/noise ratio 62 dB
Usable sensitivity 10 dB
Total harmonic distortion 0.4 %
COMPACT DISC PLAYER
Capacity 1 disc
Frequency range 20 Hz - 20 KHz (± 1 dB)
Signal/noise ratio 90 dB (at 1 KHz) with filter
Distortion 0.1 % (at 1 KHz)
Channel separation 75 dB
Disc sizes Diameter: 120 or 80 mm. Thickness: 1.2 mm
AMPLIFIER
Output power
Front Speaker(4 Ω) 60W/CH RMS,IEC (total harmonic distortion: 10 %)
Channel separation 60 dB
Signal/noise ratio 70 dB
ENG
GENERAL
Power consumption 35W
Dimensions 230(D) x 154 (H) x 251 (W) mm
Weight 2.2 Kg
MISCELLANEOUS
56
Page 59
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer
care centre.
Region Country Customer Care Center Web Site
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.