SAMSUNG max810, max870, max858, max878, max860 SERVICE BULLETIN

...

Remark

-Refer to old Service Manual for the service.(common)

-S

pace Surround Speaker

(SS-SPK)

⇒ Refer to next page

SERVICE BULLETIN

ProDuct : AUDIO MODEL : See below Buyer : See attachment

Bulletin No. : 98-AUD-E0003 Bulletin Date : Aug 14.1998 ECN & data : Aug 13.1998

- Application Models : MAX-805,818,838,858(R),868,878,888,858P Background : Change to new speaker(SS-SPK) Cause : Change to model name Solution : Refer to old Service Manual for the service(See below table) Application Date : Running Change

SUBJECT : Service Guide for model employed the new speaker

1 2 3 4 5 6 7 8 9

Old Model Name

MAX-800 MAX-810 MAX-820 MAX-830 MAX-850(R) MAX-852P MAX-860 MAX-870 MAX-880

New Model Name

MAX-805 MAX-818 MAX-828 MAX-838 MAX-858(R) MAX-858P MAX-868 MAX-878 MAX-888

Service Manual Code No

AH68-20181A AH68-20173A AH68-20186A AH68-20186A AH68-20176A AH68-20195A AH68-20176A AH68-20177A AH68-20177A

Change area

PS-445 use SS-SPK use SS-SPK use SS-SPK use SS-SPK use SS-SPK use SS-SPK use SS-SPK use SS-SPK use

Attachment

Schematic Diagram ( ) Component Lay-out ( ) Schematic Diagram ( ) Mechanical Diagram( ) None ( ) Others ( o )

Published by :

Checked by :

Approved by :

Reflecting top disc

¥ Turn the power of the amplifier off before connecting the

speakers.

¥ Connect the speakers using the cable enclosed with the

speakers as the figure shown below. The red cable should be connected to the red terminal on both the speaker and the amplifier and the black cable to the black terminal on both. Besides, the left(L) and right(R) should be matched.

¥ Connect the speaker cable to the terminal accurately.

If it is connected inaccurately, there may be no sound or noisy sound. Furthermore, if the +, -cables touched each other, the amplifier may be damaged.

¥ If the polarity of the connection is reversed, the sound quali-

ty will be lowered badly and the stereo sound will not be produced owing to the phase condition of the left and the right. Take great care to connect the speakers in phase.

¥ Clean the system with a soft cloth applied with mild deter-

gent or water.

¥ Do not use thinner, alcohol, or benzene, which peels off the

paint or makes stains on the surface.

The 360¡ Space Surround Speaker System

provides all the listeners around the speaker system with the same quality and volume of the sound.

reproduces the rich and dynamic bass sound. Especially, by the dynamic range of the medium and low frequency response, the noise generated through the port is reduced effectively to reproduce the clear bass sound.

❊ Power PortTMis the patent of Polk Audio in U.S.A. Samsung Electronic has the

manufacturing license to produce it.

Right (R) speaker

Red cable

Black cable

Red cable

Black cable

Left (L) speaker

Front and

rear tweeter

Reflecting top disc

Woofer

Power Magic Port

¥ If possible, position the height of the tweeter of the speaker

system at the same height of the ears of the listener to enjoy richer sound.

¥ It differs according

to the structure of the room. Place the speakers at the various positions to find out the optimum position. Then you will enjoy better sound.

reproduces the sound of the musical instrument more naturally than the regular speakers.

It is because that this speaker system reproduces the sound on the same principle as the resounding of the musical instrument.

To get the most effective stereo sound

About the 360° Space Surround

Maintenance

Connecting the speakers

reflects the sound uniformly in all direction. Therefore, you can hear the same sound all around the speaker system.

Reflecting

disc

The 360¡ Space Surround Speaker System

Power Magic Port

*Note : Design and Specfication are subject to change upon improvement without prior notice.