Samsung LW26A33WS User Manual
LCD TV
LW26A33W
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
-
AFTER SALES SERVICE
-
Do not hesitate to contact your retailer or service agent if a
change in the performance of your product indicates that a
faulty condition may be present.
BN68-00656C-00
ELECTRONICS
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
This device is a class B digital apparatus.
656ccover-etc 4/6/04 9:28 PM Page 1
LCD TV
LW26A33W
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
This device is a class B digital apparatus.
1-19.qxd 4/6/04 9:06 PM Page 1
English-2
Contents
CONNECTING AND
PREP ARING YOUR TV
Viewing the Control Panel ......................................................................................... 4
Viewing the Connection Panel................................................................................... 5
- Connecting an Aerial or Cable Television Network ............................................... 5
- Connecting Set-Top Box, VCR or DVD ................................................................. 5
- Connecting External A/V Devices .......................................................................... 6
- Connecting Computer ............................................................................................ 6
- Connecting Sub Woofer ......................................................................................... 7
- Connecting DVI....................................................................................................... 7
Viewing the Remote Control (All Functions Except Teletext)................................... 8
Viewing the Remote Control (Teletext Functions)..................................................... 9
Installing Batteries in the Remote Control................................................................. 10
Switching On and Off................................................................................................. 11
Placing Your Television in Standby Mode ................................................................. 11
Becoming Familiar with the Remote Control ............................................................ 12
Plug and Play ............................................................................................................. 13
Choosing Your Language .......................................................................................... 14
SETTING THE CHANNELS
Storing Channels Automatically................................................................................. 15
Storing Channels Manually ........................................................................................ 16
Editing the Channels .................................................................................................. 18
Sorting the Stored Channels ..................................................................................... 19
Assigning Channels Names ...................................................................................... 20
Fine Tuning Channel Reception ................................................................................ 21
SETTING THE PICTURE
Changing the Picture Standard ................................................................................. 22
Adjusting the Custom Picture .................................................................................... 23
Changing the Colour Tone......................................................................................... 24
Changing the Picture Size ......................................................................................... 25
Freezing the Current Picture...................................................................................... 26
DNIe(Digital Natural Image engine) .......................................................................... 26
MCC (My Colour Control) .......................................................................................... 27
I2C (Intelligent Image Control)................................................................................... 28
IBC (Intelligent Brightness Control) ........................................................................... 29
Viewing the Picture In Picture (PIP) .......................................................................... 30
SETTING THE SOUND
Adjusting the Volume ................................................................................................. 32
Switching the Sound Off Temporarily ........................................................................ 33
Changing the Sound Standard .................................................................................. 34
Adjusting the Sound Settings .................................................................................... 34
Selecting WOW Surround.......................................................................................... 35
Adjusting the Volume Automatically .......................................................................... 35
Do not display a still image (such as on a video game or when hooking up a DVD to
this LCD TV) on the Color TFT-LCD (Thin Film Transister Liquid Crystal Display)
panel for a long time as it can cause screen image retention. This image retention is
also known as “screen burn”. To avoid such image retention, reduce the degree of
brightness and contrast of this screen when displaying a still image.
1-19.qxd 4/10/04 10:23 AM Page 2
English-3
Contents
SETTING THE SOUND
Connecting Headphones........................................................................................... 36
Adjusting Your Headphone Preferences................................................................... 36
Listening to the Sound of the Sub Picture ................................................................ 37
Sub Woofer................................................................................................................. 37
SETTING THE TIME
Setting and Displaying the Current Time.................................................................. 38
Setting the Sleep Timer.............................................................................................. 39
Switching the Television On and Off Automatically................................................... 40
SETTING THE OTHERS
Setting the Blue Screen Mode................................................................................... 41
Colour Weakness ....................................................................................................... 42
Selecting the Melody ................................................................................................. 43
Selecting a Device from External Sources................................................................ 44
Viewing Pictures from External Sources................................................................... 44
SETTING THE PC
Setting up Your PC Software (Based on Windows 2000 or XP).............................. 45
Adjusting the PC Screen Automatically..................................................................... 46
Coarse and Fine Tuning of the Image....................................................................... 47
Changing the Image Position .................................................................................... 48
Initializing the Image Settings.................................................................................... 49
USING THE TELETEXT FEATURE
Teletext Decoder ........................................................................................................ 50
Displaying the Teletext Information............................................................................ 50
Selecting a Specific Teletext Page ............................................................................ 51
Using FLOF to Select a Teletext Page...................................................................... 52
RECOMMENDA TIONS FOR USE
Troubleshooting: Before Contacting Service Personnel........................................... 53
Installing Stand........................................................................................................... 54
Using the Anti-Theft Kensington Lock ....................................................................... 55
Installing VESA compliant mounting devices............................................................ 56
Technical and Environmental Specifications............................................................. 57
Display Mode (PC)..................................................................................................... 58
Pin Configurations...................................................................................................... 59
Wiring the Mains Power Supply Plug (UK Only) ...................................................... 60
Setting Up Your Remote Control ............................................................................... 61
Press Important Note
Symbols
1-19.qxd 4/6/04 9:06 PM Page 3
English-4
Viewing the Control Panel
SOURCE
Displays a menu of all of the available input
sources (TV, Ext.1, Ext.2, AV3, S-Video, DVI, PC).
You can also use the SOURCE buttons on
the TV’s control panel to make selection.
MENU
Press to see an on-screen menu of
your TV’s features.
-
+
Press to decrease or increase the volume.
Also used to select items on the
on-screen menu.
C/P.
Press to change channels.
Also press to highlight various items
on the on-screen menu.
(Without the Remote Control, You can
turn on TV by using the Channel buttons.)
(Power)
Press to turn the TV on and off.
Light Detecting Sensor
Adjusts brightness of screen automatically by
detecting brightness of surrounding environment.
This sensor works when IBC is on.
Remote Control Sensor
Aims the remote control towards this spot
on the TV.
Power Indicator
Lights up when you turn the power off.
When you turn the power off after selecting On/Off
Timer, green light will appear.
1-19.qxd 4/6/04 9:06 PM Page 4
English-5
Viewing the Connection Panel
Whenever you connect an audio or video system to your set, ensure that all elements are
switched of
f.
Connecting an Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
- An outdoor aerial
- A cable television network
- A satellite network
Connecting Set-Top Box, VCR or DVD
- Connect the VCR or DVD SCART cable to the SCART connector of the VCR or DVD.
- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box
to the VCR (or DVD) and connect the VCR (or DVD) to your set.
Input/Output Specification
Power Input
Connector
SCART 1
SCART 2
Video Audio (L/R) S-Video RGB Video+Audio (L/R)
✔✔ ✔
Only TV Out
✔✔
Monitor Out
(TV/Ext.1/Ext.2/AV3/S-VHS)
Input Output
1-19.qxd 4/8/04 2:18 PM Page 5
English-6
Viewing the Connection Panel
Connecting External A/V Devices
- Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
- Connect RCA audio cables to “
AUDIO(L)” and “AUDIO(R)” on the rear of your set and the other ends to
corresponding audio out connectors on the A/V device.
- Headphone may be connected to the headphone output ( ) on the rear of your set. While the headphone
is connected, the sound from the built-in speakers will be disabled.
Connecting Computer
- Connect the D- Sub cable to “PC (PC IN)” on the rear of your set.
- Connect the stereo audio cable to “
AUDIO (PC IN)” on the rear of your set and the other end to
“Audio Out” of the sound card on your computer.
1-19.qxd 4/6/04 9:06 PM Page 6
English-7
Viewing the Connection Panel
Connecting Sub Woofer
Connecting DVI
- Connect the DVI connector to the DVD connector.
- Connect the stereo audio cable to “
L - Audio - R” on the rear of your set and the other end to
“Audio Out” of the sound card on your DVD.
- DVI dose not support PC function.
Source Video Horizontal Frequency Vertical Frequency Resolution
(kHz) (Hz) (Lines)
Source PAL 15.625 50 575
SECAM 15.625 50 575
NTSC4.43 15.734 60 483
NTSC3.58 (Except RF) 15.704 60 483
DVI 480/60i 15.734 60 483
480/60p 31.469 60 483
576/50i 15.625 50 576
576/50p 31.250 50 576
720/60p 45.000 60 720
1080/50i 28.125 50 1080
1080/60i 33.750 60 1080
1-19.qxd 4/6/04 9:06 PM Page 7
English-8
Numeric buttons for
direct channel access
One/Two-digit channel selection
Volume up or down
(Refer to page 32)
Sound effect selection
(Refer to page 34)
Select to the PC mode directly
(Refer to page 46)
Temporary sound switch-off
(Refer to page 33)
Menu display and
change confirmation
(Refer to page 12)
DUAL I-II button
Automatic switch-off
(Refer to page 39)
Selects a target device to controlled
by the samsung remote control
(TV, STB, VCR, CABLE, DVD)
(Refer to page 61~64)
Use to see information on the
current broadcast.
(Refer to page 38)
Previous channel
-Next channel
-Previous channel
(Refer to page 11)
Available source selection
(Refer to page 44)
Exit the OSD
Control the cursor in the menu
(Refer to page 12)
Picture effect selection
(Refer to page 22)
Reset:
When your remote does not
work, change the batter ies and press
the “Reset” button for 2-3 seconds
before use.
STILL : Picture freeze
(Refer to page 26)
Set (Refer to page 61~63)
SRS WOW selection
(Refer to page 35)
The performance of the remote control may be affected by bright light.
Television On/Off
(Refer to page 11)
Viewing the Remote Control (All Functions Except Teletext)
Select to the TV mode directly
Picture size selection
(Refer to page 25)
Press to improve the digital
video quality.
(Refer to page 26)
VCR/DVD FUNCTIONS
: Rewind
: Stop
: Play/Pause
: Fast/Forward
PIP FUNCTIONS
; (Refer to page 30~31)
PIP : Picture-In-Picture
On/ Off
POSITION : PIP position selection
SIZE : PIP size selection
SWAP : Interchange the main
and sub picture
1-19.qxd 4/8/04 2:18 PM Page 8
English-9
Viewing the Remote Control (Teletext Functions)
Teletext index
Teletext hold
Exit from the teletext display
Teletext reveal
P : Teletext next page
P : Teletext previous page
Teletext mode selection
(LIST/FLOF)
Teletext size selection
Teletext store
Teletext Function : Refer to page 50-52 for details
Teletext cancel
Teletext display/mix both teletext
information and the normal broadcast
Teletext sub page
1-19.qxd 4/8/04 2:18 PM Page 9
English-10
Installing Batteries in the Remote Control
1 Slide the cover out completely.
2 Install two AAA size batteries.
Make
sure to match the “+” and “–” ends of the batteries with
the diagram inside the compartment.
3 Replace the cover.
Remove the batteries and store them in a cool, dry place
if you won’t be using the remote control for a long time.
The remote control can be used up to about 23 feet from the TV.
(Assuming typical TV usage, the batteries last for about one year.)
The remote control doesn’t work!
Check the following:
1. Is the TV power switch on?
2. Are the plus end and the minus end of the battery reversed?
3. Did the battery run out?
4. Is there a power outage?
5. Is the power cord unplugged?
6. Is there a special fluorescent light or a neon sign nearby?
1-19.qxd 4/6/04 9:06 PM Page 10
English-11
Switching On and Off
Your set can be placed in Standby mode, in order to reduce the power
consumption. The Standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1 Press the
POWER
( ) button on the remote control.
Result
:
The screen is turned off and a orange standby indicator
appears on the front of your set.
2 To switch your set back on, simply press the
POWER
( ), numeric
buttons (
0~9) or channel up/down ( / ) button again.
Do not leave your set in Standby mode for long periods of time (when you
are away on holiday, for example).
Turn your set off by pressing the POWER ( ) button on the right-side
of the set. It is best to unplug the set from the mains and aerial.
1. Use of the 'POWER' button on the remote is possible only when the
TV is in 'Power Saving' (standby) mode. If the TV is powered off, the
remote cannot be used to turn the TV on.
2. To retain the time and or automatic alarm settings, always put the TV in
stand-by mode with the remote control. Use of the the power switch on the
TV will clear all time related settings.
[Benefit] This full 'power off' function is as effective as unplugging the
power cable.
TV switches to standby mode when powered off by the remote control. To
return power ( ) to the screen, press the remote control 'ON' or channel
button( ). Pressing the power button on the TV does not return power to
the screen because in this case, the TV restores the last mode, which was
'Power Saving'.
The mains lead is attached to the rear of your set.
If you have purchased this set in the United Kingdom,
refer to page 60 for further instructions on plug wiring.
1 Plug the mains lead into an appropriate socket.
Result:
The main voltage is indicated on the rear of your set and
the frequency is 50 or 60Hz.
2 Press the
POWER
( ) button on the right-side of your set.
Result
:
The standby indicator right on the front panel.
3 Press the numeric button (0~9) or channel up/down ( / ) button
on the remote control or
C/P. button on the right-side of
your set.
Result
:
The programme that you were watching last is reselected
automatically.
When you switch the set on for the very first time, you will be
asked to choose language in which the menus are to be
displayed (see page 14).
4 To switch your set off, press the
POWER
( ) button again.
Placing Your Television in Standby Mode
1-19.qxd 4/6/04 9:06 PM Page 11
English-12
Becoming Familiar with the Remote Control
The remote control is used mainly to:
Change channels and adjust the volume
Set up your set using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button Viewing Function Menu Function
Used to display the
-
next stored channel.
Used to display the
-
previous stored channel.
to Used to display the corresponding channels.
For double digit channels, the second digit
must be pushed immediately after the first.
Failure to do this will result in a single digit
channel being displayed.
_/_ _
Used to select a channel numbered ten or over.
Press this button, and enter the two digit channel
number.
Used to increase the
-
volume.
Used to decrease the
-
volume.
MUTE
Used to switch the sound off temporarily.
To turn the sound back on, press this button
again, or press the
+
/- button.
MENU
Used to display the Used to return to the
on-screen menu system. previous menu or
normal viewing.
EXIT
Used to exit the On-Screen menu system.
Used to move among the menu items.
Used to select a menu item or increase
the value of the selected item.
Used to return to the previous menu item or
decrease the value of the selected item.
-
Used to confirm your
ENTER
choice.
1-19.qxd 4/6/04 9:06 PM Page 12
English-13
Plug and Play
When the set is initially powered ON, several basic customer settings
proceed automatically and subsequently.
The following settings are available.
1 If the set is in standby mode, press the
POWER
( ) button on the
remote control.
Result
: The message
Plug & Play
is displayed. It appears for a
little while, and then the
Language
menu is
automatically displayed.
2 Select the appropriate
Language
by pressing the or button.
The available languages are listed
.
You can choose one of 18 languages.
3 Press the
ENTER
button to confirm your choice.
Result: The message
Antenna Input Check
is displayed with
the
OK
is selected.
4 Press the
ENTER
button.
Result
: The following countries are available:
Belgie - Deutschland - Espania - France Italia - Nederland - Schweiz - Sverige - UK East Europe -Others
5 Select your
Country
by pressing the or button.
Press the
ENTER
button.
Result:
The
Auto Store
menu is displayed.
6 Press the
ENTER
button.
Result
:
The channel search will start and end automatically.
7 Select the
Hour
or
min
by pressing the or button.
Set the
Hour/min
by pressing the or button.
(Refer to “
Switching the Television On and Off Automatically”
on page 40)
8 Press the
MENU
button to confirm your setting.
Result:
The
message
Enjoy your watching
is displayed, and
then the channel which has been stored will be activated.
1-19.qxd 4/6/04 9:06 PM Page 13
English-14
Plug and Play
If you want to reset this feature...
1 Press the
MENU
button.
Result
:
The main menu is displayed.
2 Press the or button to select
Setup
.
Press the
ENTER
button
.
Result:
The options available in the
Setup
group are displayed.
3 Press the or button to select
Plug & Play
.
4 Press the
ENTER
button
.
Result:
The message is
Plug & Play
displayed.
5 For further details on how to set, refer to the previous page.
Choosing Your Language
When you start using your set for the first time, you must select the
language which will be used for displaying menus and indications.
1 Press the
MENU
button.
Result
:
The main menu is displayed.
2 Press the or button to select
Setup
.
Result
:
The options available in the
Setup
group are displayed.
3 Press the
ENTER
button
.
4 Press the or button
to
select
Language
.
Press the
ENTER
button
.
Result:
The available
languages
are listed.
5 Select a particular language by pressing the or button
repeatedly.
Press the
ENTER
button
.
You can choose one of 18 languages.
6 When you are satisfied with your choice, press the
EXIT
button to
return to normal viewing.
1-19.qxd 4/6/04 9:06 PM Page 14
English-15
Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability
depends on your country). Automatically allocated programme numbers
may not correspond to actual or desired programme numbers. However
you can sort numbers manually and clear any channels you do not wish
to watch.
1 Press the
MENU
button.
Result
:
The main menu is displayed.
2 Press the or button to select
Channel
.
Result
:
The options available in the
Channel
group are
displayed.
3 Press the
ENTER
button
.
Result:
The
Country
is selected.
4 Press the
ENTER
button again
. Select your
Country
by pressing the
or
button repeatedly.
Result:
The following countries are available:
Belgie - Deutschland - Espania - France - Italia Nederland - Schweiz - Sverige - UK East Europe - Others
5 Press the
ENTER
button
.
6 Press the or button to select
Auto Store
.
Press the
ENTER
button
.
Result:
The
Start
is selected.
7 Press
ENTER
button to search the channels.
The sub menu is changed from
StarttoStop
with channel search
started.
Result
: The search will end automatically. Channels are sorted
and stored in an order which reflects their position in the
frequency range (with lowest first and highest last).
The programme originally selected is then displayed.
To return to the previous menu, press or button to
select
Return
and then press
ENTER
button.
To stop the search before it has finished, press
ENTER
button with stop selected.
8 When the channels have been stored, you can:
Sort them in the order required (refer to page 19)
Assign a name to the stored channels (refer to page 20)
Add or delete the channels (refer to page 18)
Fine tune channel reception if necessary (refer to page 21)
1-19.qxd 4/6/04 9:06 PM Page 15
You can store up to 100 channels, including those received via cable
networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found
The programme number of each stored channel which you
wish to identify
1 Press the
MENU
button.
Result
:
The main menu is displayed.
2 Press the or button to select
Channel
.
Result
:
The options available in the
Channel
group are
displayed.
3 Press the
ENTER
button
.
4 Press the or button
to
select
Manual Store
.
Press the
ENTER
button.
Result: The options available in the
Manual Store
menu are
displayed with
prog.No
selected.
5 Press the
ENTER
button again.
To assign a programme number to a channel, find the correct
number by pressing the or button and then press the
ENTER
button
.
6 Press the or button to select
Colour System
and then press
the
ENTER
button.
Select the
Colour System
required by pressing the or button
repeatedly and then press the
ENTER
button.
Result
: The colour standards are displayed in the following order:
AUTO - PAL - SECAM - NT4.43
7 Press the or button to select
Sound System
and then press
the
ENTER
button.
Select the sound standard required by pressing the or button
repeatedly and then press the
ENTER
button.
Result
: The sound standards are displayed in the following order:
BG - DK - I - L
8 For all the channels to move to the required channel numbers,
repeat steps
5 to 7 after selecting
prog.No
by pressing or
button
.
English-16
Storing Channels Manually
1-19.qxd 4/6/04 9:06 PM Page 16
9 If you know the number of the channel to be stored....
Press the or button to select
Channel
and then press the
ENTER
button.
Select
C (Air channel) or S (Cable channel) by pressing the
or button.
Press the button to select Channel.
Select the required number by pressing the or button and
then press the
ENTER
button.
If there is abnormal sound or no sound, re-select the sound
system required.
10 If you do not know the channel numbers, press the or button
to select
Search
and then press the
ENTER
button.
Search
by pressing or button and then press the
ENTER
button.
Result: The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
11 Press the or button to select
Store
and then press the
ENTER
button.
Select
Yes
by pressing the or button and then press the
ENTER
button.
Result
: The channel and associated programme number are
stored.
12 Repeat Steps 9 to11 for each channel to be stored.
Channel mode
P (Programme mode): When tuning is completed, the
broadcasting stations in your area will have been assigned to
position numbers from P00 to P99. You can select a channel
by entering the position number in this mode.
C (Real channel mode): You can select a channel by entering
the assigned number to each broadcast station in this mode.
S (Cable channel mode): You can select a channel by
entering the assigned number to each cable channel in this
mode.
English-17
Storing Channels Manually
1-19.qxd 4/6/04 9:06 PM Page 17
You can exclude the channels you chosen from the channels you
scanned. When you scan through the stored channels, those you have
chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed
during scanning.
1 Press the
MENU
button.
Result
:
The main menu is displayed.
2 Press the or button to select
Channel
.
Press the
ENTER
button
.
Result:
The options available in the
Channel
group are
displayed.
3 Press the or button to select
Add/Delete
.
Press the
ENTER
button.
Result
:
The state of current
channel
is displayed.
4 Press the / button to select
Channel
that you wish to
Add
or
Delete
.
Result
:
If the channel that you wish to edit is not in memory, the
Add
is selected and displayed.
Otherwise, if the channel that you wish to edit is in
memory, the
Delete
is selected and displayed.
5 Press the
ENTER
button to
Add
or
Delete
channel.
6 To return to the previous menu, select
Return
by pressing the
or button and then press the
ENTER
button.
7 Repeat Step 4 and 6 for each channel to be added or deleted.
English-18
Editing the Channels
1-19.qxd 4/6/04 9:06 PM Page 18
English-19
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
Modify the numeric order in which the channels have been
automatically stored.
Give easily remembered numbers to the channels that you
watch most often.
1 Press the
MENU
button.
Result
:
The main menu is displayed.
2 Press the or button to select
Channel
.
Press the
ENTER
button
.
Result:The options available in the
Channel
group are
displayed.
3 Press the or button to select
Sort
.
Press the
ENTER
button.
Result
: The
Prog.No, Channel
and
Name
are
displayed.
4 Select the
Channel
number that you wish to change by pressing
the or button repeatedly.
Press the
ENTER
button
.
Result: The selected
Channel
number and
Name
is moved to
right side.
5 Press the or button to move to the position which you would
like to change and then press the
ENTER
button.
Result
: The selected channel is exchanged with the one
previously stored to the chosen number
.
6 Repeat step 4 to 5 for another channel to sort again.
1-19.qxd 4/6/04 9:06 PM Page 19
Loading...