SAMSUNG LTY460HM03 Specification

Contents

Revision History -------------------------------------------------------------------------------------------- (3)
General Description --------------------------------------------------------------------------------------- (4)
General Information --------------------------------------------------------------------------------------- (4)

1. Absolute Maximum Ratings -------------------------------------------------------------------------- (5)

2. Optical Characteristics --------------------------------------------------------------------------------- (6)

3. Electrical Characteristics ------------------------------------------------------------------------------- (9)

3.1 TFT LCD Module

3.2 Back Light Unit

4. Block Diagram ------------------------------------------------------------------------------------------- (11)

5. Input Terminal Pin Assignment --------------------------------------------------------------------- (12)

5.1 Input Signal & Power

5.2 Input Pin Configuration

5.3 LVDS Interface

5.3 Input Signals, Basic Display Colors and Gray Scale of Each Color

6. EDID Information --------------------------------------------------------------------------------------- (18)

6.1 EEPROM Data

6.2 EEPROM Data Map

7. Interface Timing ---------------------------------------------------------------------------------------- (20)

7.1 Timing Parameters (DE only mode)

7.2 Timing Diagrams of interface Signal (DE only mode)

7.3 Power ON/OFF Sequence

8. Outline Dimension -------------------------------------------------------------------------------------- (23)

9. EMI Specification --------------------------------------------------------------------------------------- (25)

10. UL Approval

11. Reliability Test ----------------------------------------------------------------------------------------- (26)

12. Packing ------------------------------------------------------------------------------------------------ (27)

13. Marking & Others ------------------------------------------------------------------------------------- (28)

14. General Precaution ---------------------------------------------------------------------------------- (29)

14.1 Handling

14.2 Storage

14.3 Operation

14.4 Operation Condition Guide

14.5 Others

2/ 31Page05-000-S-100416Doc. NoLTY[Z]460HM03MODEL

* Revision History

Date

Apr.

16,

2010

Rev.

No

SummaryPage

First Issued-000

3/ 31Page05-000-S-100416Doc. NoLTY[Z]460HM03MODEL

General Description

Description

LTY[Z]460HM03 is a color active matrix liquid crystal display (LCD) that uses amorphous
silicon TFT(Thin Film Transistor) as switching components. This model is composed of a
TFT LCD panel, a driver circuit and a back light unit. The resolution of a 46.0“ is 1920 x
1080 and this model can display up to 16.7million colors with wide viewing angle of 89¶ or
higher in all directions. This panel is intended to support applications to provide a excellent
performance for Flat Panel Display such as Home-alone Multimedia TFT-LCD TV, Display
terminals for AV application products, and High Definition TV (HDTV).

Features

 RoHS compliance (Pb-free)
 High contrast ratio, high aperture ratio, fast response time
 SPVA (Super Patterned Vertical Align) mode
 Wide viewing angle (·89¶)
 Full HD (1920 x 1080 pixels) resolution (16:9)
 Low Power consumption
 WLED (White Light Emitting Diode) Backlight
 LVDS (Low Voltage Differential Signaling) interface

General Information

Module Size

Luminance of White

Haze 0.2%, Hard-coating (3H)Surface Treatment

1083(H

RGB vertical stripePixel Arrangement

Normally BlackDisplay Mode

) x 627(V

TYP

61.7(D

380

MAX

UnitSpecificationItems

)

TYP

)

mm

g10150(Max)Weight
mm0.17675(H) * 3 x 0.53025(V)Pixel Pitch
mm1018.08(H) x 572.67(V)Active Display Area

colors8 bit- 16.7MDisplay Colors

pixel1920 x 1080Number of Pixels

cd/m

2

Note

·1.0mm

Typ.

4/ 31Page05-000-S-100416Doc. NoLTY[Z]460HM03MODEL

1. Absolute Maximum Ratings

If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.

NoteUnitMax.Min.SymbolItem

Power Supply Voltage

Storage temperature

Operating Temperature

Panel surface temperature

Shock ( non - operating )

S

Vibration ( non - operating )

Note (1) Ta= 25 · 2 ¶C

(2) Temperature and relative humidity range are shown in the figure below.

a. 93.8 % RH Max. (Ta ˺ 40 ¶C)
b. Maximum wet-bulb temperature at 40 ¶C or less. (Ta ˺ 40 ¶C)
c. No condensation

(3) Polarizer will not be damaged in this range, even though abnormal visual problems occur

in

T

(4) 11ms, sine wave, one time for ·X, ·Y, ·Z axis
(5) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis

SUR

range.

NOP

DD

STG

OPR

SUR

NOP

·XY axis

·Z axis

65-20T
500T
650T

-

40

୅

୅

୅

30-

(1)V13GND-0.5V
(2)

(2)
(3)

(4)G

(5)G1.5-V

(40, 93.8)

(50, 50.4)

Fig. Temperature and Relative humidity range

(65, 27.7)

5/ 31Page05-000-S-100416Doc. NoLTY[Z]460HM03MODEL

2. Optical Characteristics

The optical characteristics should be measured in a dark room or equivalent.
Measuring equipment : TOPCON BM-7,SPECTRORADIOMETER SR-3

(Ta = 25 · 2¶C, VDD=12V, fv= 60Hz, f

=148.5MHz, Dim = 100%)

DCLK

NoteUnitMax.Typ.Min.ConditionSymbolItem

Contrast Ratio

(Center of screen)

Response

Time

Luminance of White

(Center of screen)

Color

Chromaticity

(CIE 1931)

Rising
Falling
G-to-G

[AVE]

Red

Green

Blue

White

Tg

Rx

-5000*2500C/R

(3)

SR-3
7012-Tr
188-Tf

msec

(5)

BM-7

-8-

L

TL,R=0

TU,D=0

Viewing

Angle

TYP.

-0.03

0.617

0.331Ry

0.314Gx

0.627Gy

0.155Bx

Normal

-380320Y

TYP.

+0.03

cd/m

2

(6)

SR-3

(7),(8)

SR-3

0.051By

0.280Wx

0.290Wy
%-72--Color Gamut

(7)

SR-3

Gamma

Hor.

Viewing

Angle

Ver.

Brightness Uniformity

(9 Points)

K-10000--Color Temperature

Ƚ

T

L

R

U

D

uni

C/R˻10

-2.2-

-8979

-8979T
Degree

-8979T

-8979T

%30--B

(7)

SR-3

(8)

SR-3

(4)

SR-3

* marked Items Value does not Specification above when “White stain” occurs at Center Point [Point ྜྷ of Note 2.]

Note (1) Test Equipment Setup

The measurement should be executed in a stable, windless and dark room between
40min and 60min after lighting the back light at the given temperature for stabilization
of the back light. This should be measured in the center of screen.

Single lamp current @ Vdim = 100%
Environment condition : Ta = 25 · 2 ¶C

6/ 31Page05-000-S-100416Doc. NoLTY[Z]460HM03MODEL

Field Photo detector

ྙྚྛ

ྞ

ྡ

ྠ

ྜྷ ྜ

ྟ

1ദSR-3
2ദBM-7

TFT - LCD Module

Note (2) Definition of test point

320 960 1600

Photo detector

Field

SR-3 : 50໅
BM-7 : 50໅

LCD Panel

The center of the screen

180

540

900

Note (3) Definition of Contrast Ratio (C/R)

: Ratio of gray max (Gmax) & gray min (Gmin) at the center point 㽶 of the panel

CR

/

G

max

G

min

Gmax : Luminance with all pixels white
Gmin : Luminance with all pixels black

Active Area
Test Point

7/ 31Page05-000-S-100416Doc. NoLTY[Z]460HM03MODEL

Note (4) Definition of 9 points brightness uniformity

Buni

BB



(max min)

100

B



max

Bmax : Maximum brightness
Bmin : Minimum brightness

Note (5) Definition of Response time : Sum of Tr, Tf

Display data

Optical Instruments

Response

100%

Black (data off)

T

R

White (data on)

90%

10%

0%

White (data off)

T

F

TIME

Note (6) Definition of Luminance of White : Luminance of white at center point 㽶
Note (7) Definition of Color Chromaticity (CIE 1931)

Color coordinate of Red, Green, Blue & White at center point 㽶

Note (8) Definition of Viewing Angle

: Viewing angle range (C/R ı10)

8/ 31Page05-000-S-100416Doc. NoLTY[Z]460HM03MODEL

3. Electrical Characteristics

3.1 TFT LCD Module

The connector for display data & timing signal should be connected.

Ta = 25¶C · 2 ¶C

NoteUnitMax.Typ.Min.SymbolItem

Voltage of Power Supply

(a) Black

Current
of Power
Supply

DD

1020850­17401450-(b) White

I

DD

1100920-(c) Mosaic

17001420-(4) Max Pattern
Vsync Frequency
Hsync Frequency
Main Frequency
Rush Current

V

H

DCLK

RUSH

kHz7367.550f

MHz155148.5130f

Note (1) The ripple voltage should be controlled under 10% of VDD.

(2) f

V=60Hz, fDCLK = 148.5MHz, V

= 12.0V, DC Current.

DD

(3) Power dissipation check pattern (LCD Module only)

a) Black Pattern b) White Pattern c) Mosaic d)Max. Pattern

(1)V131211V

(2),(3)mA

Hz626047f

(4)A5--I

(4) Measurement Conditions

100%

90%

10%
GND

Rush Current I

can be measured when T

RUSH

T

RUSH

=1ms

RUSH

. is1ms

V

DD

9/ 31Page05-000-S-100416Doc. NoLTY[Z]460HM03MODEL

3.2 Back Light Unit

The back light contains 240 LEDs.
The characteristics of lamps are shown in the following tables.

Ta=25 · 2¶C

NoteUnitMax.Typ.Min.SymbolItem

(1)Hour--30,000HrOperating Life Time

/StringmA160--I

@110mA

/Duty100%

60LEDs

/110mA@Tj 25୅

Tj 25୅V229--V

Operating

Current

Operating

Voltage

Continuous

Impulsive

(60Hz/Duty50%)

Continuous

Impulsive

(60Hz/Duty50%)

op

op

op

op

mA185--I

V212--V

Note (1) It is defined as the time to take until the brightness reduces to 50% of its original value.

[Definition of Operating Voltage : At each Strings, I

= 110.0 mArms (typ.)]

op

10 / 31Page05-000-S-100416Doc. NoLTY[Z]460HM03MODEL