Page 1
Global LCD Panel Exchange Center
www.panelook.com
Contents
Revision History -------------------------------------------------------------------------------------------- (3)
General Description --------------------------------------------------------------------------------------- (4)
General Information --------------------------------------------------------------------------------------- (4)
1. Absolute Maximum Ratings -------------------------------------------------------------------------- (5)
2. Optical Characteristics --------------------------------------------------------------------------------- (6)
3. Electrical Characteristics ------------------------------------------------------------------------------- (9)
3.1 TFT LCD Module
3.2 Back Light Unit
4. Block Diagram ------------------------------------------------------------------------------------------- (11)
5. Input Terminal Pin Assignment --------------------------------------------------------------------- (12)
5.1 Input Signal & Power
5.2 Inverter Input Pin Configuration
5.3 LVDS Interface
5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color
6. EDID Information --------------------------------------------------------------------------------------- (18)
6.1 EEPROM Data
6.2 EEPROM Data Map
7. Interface Timing ---------------------------------------------------------------------------------------- (20)
7.1 Timing Parameters (DE only mode)
7.2 Timing Diagrams of interface Signal (DE only mode)
7.3 Power ON/OFF Sequence
8. Outline Dimension -------------------------------------------------------------------------------------- (23)
9. EMI Specification --------------------------------------------------------------------------------------- (25)
10. UL Approval
11. Reliability Test ----------------------------------------------------------------------------------------- (26)
12. Packing ------------------------------------------------------------------------------------------------ (27)
13. Marking & Others ------------------------------------------------------------------------------------- (28)
14. General Precaution ---------------------------------------------------------------------------------- (29)
14.1 Handling
14.2 Storage
14.3 Operation
14.4 Operation Condition Guide
14.5 Others
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
2/ 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 2
Global LCD Panel Exchange Center
˧
* Revision History
www.panelook.com
Date
Jan.
29,
2010
Apr.
26,
2010
Rev.
No
SummaryPage
First Issued-000
•LED Vendor Multiplication
-SLED
4,6001
Model Code Added : LTY[Z]4000HM02-103
SLED + SSC(2ndVendor)
TypMinLuminance
450380SLED
400330SSC
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
3/ 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 3
Global LCD Panel Exchange Center
General Description
Description
LTY[Z]400HM02 is a color active matrix liquid crystal display (LCD) that uses amorphous
silicon TFT(Thin Film Transistor) as switching components. This model is composed of a
TFT LCD panel, a driver circuit and a back light unit. The resolution of a 40.0“ is 1920 x
1080 and this model can display up to 16.7million colors with wide viewing angle of 89¶ or
higher in all directions. This panel is intended to support applications to provide a excellent
performance for Flat Panel Display such as Home-alone Multimedia TFT-LCD TV, Display
terminals for AV application products, and High Definition TV (HDTV).
Features
RoHS compliance (Pb-free)
High contrast ratio, high aperture ratio, fast response time
SPVA (Super Patterned Vertical Align) mode
Wide viewing angle (·89¶)
Full HD (1920 x 1080 pixels) resolution (16:9)
Low Power consumption
WLED (White Light Emitting Diode) Backlight
LVDS (Low Voltage Differential Signaling) interface
www.panelook.com
General Information
Module Size
Luminance of White
927.7(H
Haze 7%, Hard-coating (3H)Surface Treatment
RGB vertical stripePixel Arrangement
TYP
25.3(D
Normally BlackDisplay Mode
450 / *400
) x 545.8(V
)
MAX
TYP
UnitSpecificationItems
)
mm
g8000(Max)Weight
mm0.15375(H) * 3 x 0.46125(V)Pixel Pitch
mm885.6(H) x 498.15(V)Active Display Area
colors8 bit- 16.7MDisplay Colors
pixel1920 x 1080Number of Pixels
cd/m
2
Note
·1.0mm
Typ.
Note. “*” Marked Item is Luminance of 2ndLED Vendor.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
4/ 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 4
Global LCD Panel Exchange Center
1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.
www.panelook.com
NoteUnitMax.Min.SymbolItem
Power Supply Voltage
Storage temperature
Operating Temperature
Panel surface temperature
Shock ( non - operating )
Vibration ( non - operating )
Note (1) Ta= 25 · 2 ¶C
(2) Temperature and relative humidity range are shown in the figure below.
a. 93.8 % RH Max. (Ta ˺ 40 ¶C)
b. Maximum wet-bulb temperature at 40 ¶C or less. (Ta ˺ 40 ¶C)
c. No condensation
(3) Polarizer will not be damaged in this range, even though abnormal visual problems occur
T
in
(4) 11ms, sine wave, one time for ·X, ·Y, ·Z axis
(5) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis
SUR
range.
DD
STG
OPR
SUR
NOP
NOP
65-20T
500T
650T
50
(1)V13GND-0.5V
(2)
(2)
(3)
(4)G-S
(5)G1.5-V
(40, 93.8)
(50, 50.4)
Fig. Temperature and Relative humidity range
(65, 27.7)
5/ 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 5
Global LCD Panel Exchange Center
2. Optical Characteristics
The optical characteristics should be measured in a dark room or equivalent.
Measuring equipment : TOPCON BM-7,SPECTRORADIOMETER SR-3
(Ta = 25 · 2¶C, VDD=12V, fv= 60Hz, f
www.panelook.com
=148.5MHz, Dim = 100%)
DCLK
NoteUnitMax.Typ.Min.ConditionSymbolItem
Contrast Ratio
(Center of screen)
Response
Time
Luminance of White
(Center of screen)
Color
Chromaticity
(CIE 1931)
Rising
Falling
G-to-G
[AVE]
Red
Green
Blue
White
Tg
Y
Rx
-5000*2500C/R
(3)
SR-3
7012-Tr
188-Tf
msec
(5)
BM-7
-8-
L
TL,R=0
Normal
380
**330
TU,D=0
Viewing
Angle
TYP.
-0.03
450
**400
0.625
0.340Ry
0.315Gx
0.628Gy
0.155Bx
-
TYP.
+0.03
cd/m
2
(6)
SR-3
(7),(8)
SR-3
0.045By
0.280Wx
0.290Wy
%-72--Color Gamut
(7)
SR-3
Gamma
Hor.
Viewing
Angle
Ver.
Brightness Uniformity
(9 Points)
K-10000--Color Temperature
Ƚ
T
L
R
U
D
uni
C/R˻10
-2.2-
-8979
-8979T
Degree
-8979T
-8979T
%30--B
(7)
SR-3
(8)
SR-3
(4)
SR-3
* marked Items Value does not Specification above when “White stain” occurs at Center Point [Point ྜྷ of Note 2.]
**marked Items are the value of 2
nd
Vendor LED.
Note (1) Test Equipment Setup
The measurement should be executed in a stable, windless and dark room between
40min and 60min after lighting the back light at the given temperature for stabilization
of the back light. This should be measured in the center of screen.
Single lamp current @ Vdim = 100%
Environment condition : Ta = 25 · 2 ¶C
6/ 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 6
Global LCD Panel Exchange Center
ྙྚྛ
ྞ
ྡ
ྠ
ྜྷ ྜ
ྟ
www.panelook.com
Field Photo detector
1ദSR-3
2ദBM-7
TFT - LCD Module
Note (2) Definition of test point
320 960 1600
Photo detector
Field
SR-3 : 50
BM-7 : 50
LCD Panel
The center of the screen
180
540
900
Note (3) Definition of Contrast Ratio (C/R)
: Ratio of gray max (Gmax) & gray min (Gmin) at the center point 㽶 of the panel
CR
/
G
max
G
min
Gmax : Luminance with all pixels white
Gmin : Luminance with all pixels black
Active Area
Test Point
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
7/ 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 7
Global LCD Panel Exchange Center
Note (4) Definition of 9 points brightness uniformity
www.panelook.com
BB
Buni
Bmax : Maximum brightness
Bmin : Minimum brightness
Note (5) Definition of Response time : Sum of Tr, Tf
Display data
Optical Instruments
Response
(max min)
100
100%
90%
10%
0%
B
max
Black (data off)
White (data on)
T
R
White (data off)
T
F
TIME
Note (6) Definition of Luminance of White : Luminance of white at center point 㽶
Note (7) Definition of Color Chromaticity (CIE 1931)
Color coordinate of Red, Green, Blue & White at center point 㽶
Note (8) Definition of Viewing Angle
: Viewing angle range (C/R ı10)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
8/ 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 8
Global LCD Panel Exchange Center
3. Electrical Characteristics
3.1 TFT LCD Module
The connector for display data & timing signal should be connected.
www.panelook.com
Ta = 25¶C · 2 ¶C
NoteUnitMax.Typ.Min.SymbolItem
Voltage of Power Supply
(a) Black
Current
of Power
Supply
DD
-580-
1020850-(b) White
I
DD
-700-(c) Mosaic
1120930-(4) Max Pattern
Vsync Frequency
Hsync Frequency
Main Frequency
Rush Current
V
H
DCLK
RUSH
kHz7367.550f
MHz155148.5130f
Note (1) The ripple voltage should be controlled under 10% of VDD.
(2) f
V=60Hz, fDCLK = 148.5MHz, V
= 12.0V, DC Current.
DD
(3) Power dissipation check pattern (LCD Module only)
a) Black Pattern b) White Pattern c) Mosaic d)Max. Pattern
(1)V131211V
(2),(3)mA
Hz626047f
(4)A5--I
(4) Measurement Conditions
V
100%
DD
90%
10%
GND
T
=1ms
RUSH
Rush Current I
can be measured when T
RUSH
RUSH
. is1ms
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
9/ 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 9
Global LCD Panel Exchange Center
3.2 Back Light Unit
The back light unit contains 176 LEDs.
The characteristics of lamps are shown in the following tables.
www.panelook.com
Ta=25 · 2¶C
NoteUnitMax.Typ.Min.SymbolItem
(1)Hour--30,000HrOperating Life Time
Continuous
Operating
Current
Operating
Voltage
Note (1) It is defined as the time to take until the brightness reduces to 50% of its original value.
[Definition of Operating Voltage : At each Strings, I
Impulsive
(60Hz/Duty50%)
Continuous
Impulsive
(60Hz/Duty50%)
op
op
op
mA190--I
V155--V
= 110.0 mArms (typ.)]
op
/StringmA160--I
@110mA
/Duty100%
44LEDs
/110mA@Tj 25
Tj 25V168--Vop
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
10 / 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 10
Global LCD Panel Exchange Center
4. Block Diagram
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
11 / 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 11
Global LCD Panel Exchange Center
5. Input Terminal Pin Assignment
5.1. Input Signal & Power Connector : IS050-C51B-C38(UJU)
www.panelook.com
Compatible with FI-RE51S-HF(JAE)
PIN
No.
Signal
Description
V
DD
V
DD
V
DD
V
DD
V
DD
No Connection
GND
GND
GND
Odd LVDS Signal -
Odd LVDS Signal +
Odd LVDS Signal -
Odd LVDS Signal +
Odd LVDS Signal -
Odd LVDS Signal +
PIN
No.
RX1_CLKN_I32GND7
RX1_CNKP_I33GND8
RX1_AP_I26Power1
RX1_BN_I27Power2
RX1_BP_I28Power3
RX1_CN_I29Power4
RX1_CP_I30Power5
RX1_DN_I35RX0_AN_I10
RX1_DP_I36RX0_AP_I11
SCL_C40RX0_CP_I15
Signal
GND31N.C.6
GND34GND9
N.C.37RX0_BN_I12
N.C.38RX0_BP_I13
GND39RX0_CN_I14
Description
Even LVDS Signal +
Even LVDS Signal -
Even LVDS Signal +
Even LVDS Signal -
Even LVDS Signal +
GND
Even LVDS Clock-
Even LVDS Clock+
GND
Even LVDS Signal -
Even LVDS Signal +
No Connection
No Connection
GND
I2C SCL
GND
Odd LVDS CLK -
Odd LVDS CLK +
GND
Odd LVDS Signal -
Odd LVDS Signal +
No Connection
GND
Even LVDS Signal -
SDA_C41GND16
VSYNC42RX0_CLKN_I17
BUS_SW43RX0_CLKP_I18
N.C.44GND19
N.C.45RX0_DN_I20
LUT SEL046RX0_DP_I21
LUT SEL147N.C.22
LUT SEL248N.C.23
HSYNC49GND24
TCON_RDY50RX1_AN_I25
SEL151
I2C SDA
V Sync Signal
Bus Switching
No Connection
No Connection
DCC LUT Select 0
DCC LUT Select1
DCC LUT Select2No Connection
H Sync Signal
T-Con Ready
SEC Internal Use Only
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
12 / 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 12
Global LCD Panel Exchange Center
BUS_SW : I2C BUS Switching
www.panelook.com
DescriptionOperation
sv~Vvwlu
DCC Look Up Table Selection
Pin N.O.
Select
bit
TCON Ready
4748
0
0
0
0
1
1
1
1
0
0
1
1
0
0
1
1
SDA/SCL LINE BECOME HI-Z
USER CAN ACCESS EEPROMHIGH
46
0
1
0
1
0
1
0
1
For 60Hz @ Low Temp.
For 60Hz @ Low Temp.
Description ( Based on DCC On)
For 60Hz
For 60Hz
For 50Hz
For 50Hz
%(For Interpolate)LUT
100%
100%X1.25
100%X1.25
(100%X1.25) X 1.25
100%
100%X1.25
0%
DescriptionOperation
Normal OperationLow Æ High
Error OperationHigh Æ Low
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
13 / 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 13
Global LCD Panel Exchange Center
Note(1) Pin number starts from Right side
www.panelook.com
PCB
Pin No. 1 Pin No. 51
#1
connect name
#1
#51
#51
Fig. Connector diagram
a. All GND pins should be connected together and also be connected to the LCD’s
metal chassis.
b. All power input pins should be connected together.
c. All NC pins should be separated from other signal or power.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
14 / 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 14
Global LCD Panel Exchange Center
5.2 Inverter Input Pin Configuration
4pin :DC Voltage Connecter : 51103-0400 (Molex)
5pin :Feedback Voltage Connecter : 51103-0500 (Molex)
www.panelook.com
Pin Configuration (FUNCTION)Pin No.
1 Channel DC Voltage1
2 Channel DC Voltage2
No Connection3
No Connection4
Pin Configuration (FUNCTION)Pin No.
1 Channel Feedback1
2 Channel Feedback2
No Connection3
No Connection4
No Connection5
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
15 / 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 15
Global LCD Panel Exchange Center
5.3 LVDS Interface
www.panelook.com
TxOUT/RxIN0
TxOUT/RxIN1
Odd DataLVDS pin
R2TxIN/RxOUT0
R3TxIN/RxOUT1
R4TxIN/RxOUT2
R5TxIN/RxOUT3
R6TxIN/RxOUT4
R7TxIN/RxOUT6
G2TxIN/RxOUT7
G3TxIN/RxOUT8
G4TxIN/RxOUT9
G5TxIN/RxOUT12
G6TxIN/RxOUT13
G7TxIN/RxOUT14
B2TxIN/RxOUT15
Even Data
R2
R3
R4
R5
R6
R7
G2
G3
G4
G5
G6
G7
B2
TxOUT/RxIN2
TxOUT/RxIN3
B3TxIN/RxOUT18
B4TxIN/RxOUT19
B5TxIN/RxOUT20
B6TxIN/RxOUT21
B7TxIN/RxOUT22
HSYNCTxIN/RxOUT24
VSYNCTxIN/RxOUT25
DENTxIN/RxOUT26
R0TxIN/RxOUT28
R1TxIN/RxOUT29
G0TxIN/RxOUT30
G1TxIN/RxOUT31
B0TxIN/RxOUT32
B1TxIN/RxOUT33
B3
B4
B5
B6
B7
HSYNC
VSYNC
DEN
R0
R1
G0
G1
B0
B1
ReservedTxIN/RxOUT34
Reserved
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
16 / 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 16
Global LCD Panel Exchange Center
www.panelook.com
5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color
COLOR
BASIC
COLOR
GRAY
SCALE
OF
RED
GRAY
SCALE
OF
GREEN
GRAY
SCALE
OF
BLUE
DISPLAY
(8bit)
BLACK
E
E
IT
DARK
˦
˨
LIGHT
D
DARK
˦
˨
LIGHT
DA
RK
˦
˨
LIGHT
DATA SIGNAL
BLUEGREENRED
N
111111111111100000000CYAN
1111111111111111WH
00000000000000000000000BLACK
::::::::
0000000000011111111RE
:::::::::::
N
:::::::::::::
::::::::::
::::::::::::::::::
00000000000000011111110
00000000000000000000000BLACK
:::::::
::::::::::::::::::
0000001111111100000000GREE
00000000000000000000000BLACK
:::::
::::::::::::::::::
GRAY
SCALE
LEVEL
B7B6B5B4B3B2B1B0G7G6G5G4G3G2G1G0R7R6R5R4R3R2R1R0
-000000000000000000000000
-111111110000000000000000BLUE
-000000001111111100000000GRE
-111
-000000000000000011111111RED
-111111110000000011111111MAGENTA
-000000001111111111111111YELLOW
-11111111
R00
R1000000000000000000000001
R2000000000000000000000010
R3~
R252
R253000000000000000011111101
R2540
R25500000
G00
G1000000000000000100000000
G2000000000000001000000000
G3~
G252
G253000000001111110100000000
G254000000001111111000000000
G25500
B00
B1000000010000000000000000
B2000000100000000000000000
B3~
B252
B253111111010000000000000000
B254111111100000000000000000
B255111111110000000000000000BLUE
Note) Definition of Gray :
Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level)
Input Signal : 0 = Low level voltage, 1 = High level voltage
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
17 / 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 17
Global LCD Panel Exchange Center
6. EDID Information
6.1 EEPROM Data
www.panelook.com
EEPROM Data
RemarkDataAddressSpecItemNo
Panel Product
1
Vender
2 Screen Size XX 01 XX 16讝
3 H-Resolution XXXX 02,03 XX,XX 16讝
4 V-Resolution XXX 04,05 XX,XX 16讝
Vertical
5
Frequency
6 Data Format XX 07 XX - Note 3
FRC Revision
7
Information
8 Part Number
Note 1. Note 2. Note 3.
Data Panel Vender Code
00 HDLCD(SEC)
XXXX 00 XX
XX 06 XX - Note 2
XED XX
XX,XX,XX,XX,XX,
XXX(X)XXXXX
XX
Data V-Frequency
00 50/60Hz
E0~EC
XX,XX,XX,XX,XX,
XX,
XX
,XX,XX,XX,XX
Data Data Format
00 6Bit
SONY Choice
-Note 1
ASCII
-Note 4
ASCII
- Note 5, 6
01 Others
02 Others
03 Others
04 Others
05 Others
Note 4.
- FRC Revision Code will be Changed from “00” to “41” (A)
When FRC IC is changed. At First MP. This Code will be “00”
Note 5.
- LTY[Z]XXXXXXX Only for SEC Model
Note 6.
- Rest of them must be “00” (Null)
01 100/120HZ
02 200/240Hz
01 8Bit
02 10Bit
18 / 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 18
Global LCD Panel Exchange Center
6.2 EEPROM Data Map
0123456789ABCDEF
0 XXXXXXXXXXXXXXXX0000000000000000
1 00000000000000000000000000000000
2 00000000000000000000000000000000
3 00000000000000000000000000000000
4 00000000000000000000000000000000
5 00000000000000000000000000000000
6 00000000000000000000000000000000
www.panelook.com
7 00000000000000000000000000000000
8 00000000000000000000000000000000
9 00000000000000000000000000000000
A 00000000000000000000000000000000
B 00000000000000000000000000000000
C 00000000000000000000000000000000
D 00000000000000000000000000000000
E XXXXXXXXXXXXXXXXXXXXXXXXXXXX 00 00
F 00000000000000000000000000000000
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
19 / 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 19
Global LCD Panel Exchange Center
7. Interface Timing
7.1 Timing Parameters ( DE only mode )
www.panelook.com
NOTEUnitMAX.TYP.MIN.SYMBOLITEMSIGNAL
Clock
Hsync
Vsync
Frequency
C
H
V
Active
Vertical
Display
Period
VD
Display Term
Vertical
Total
VB
Active
Horizontal
Display
Period
HD
Display Term
Horizontal
Total
H
Note) This product is DE only mode. The input of Hsync & Vsync signal does
not have an effect on normal operation.
(1) Test Point : TTL control signal and CLK at LVDS Tx input terminal in system
(2) Internal V
DD = 3.3V
-MHz155148.51301/T
-KHz7367.550F
-Hz626047F
-lines-1080-T
-Lines148011251100T
-clocks-1920-T
-clocks245022002154T
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
20 / 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 20
Global LCD Panel Exchange Center
7.2 Timing diagrams of interface signal ( DE only mode )
www.panelook.com
TV
DE
DE
DCLK
DATA
SIGNALS
TVD
TVB
TH
THD
TC
DCLK
DISPLAY
DATA
DE
TC
TCH
TDS TDH
TES
TCL
0.5
V
0.5
V
CC
0.5
V
CC
CC
21 / 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 21
Global LCD Panel Exchange Center
7.3 Power ON/OFF Sequence
To prevent a latch-up or DC operation of the LCD Module, the power on/off
sequence should be as the diagram below.
www.panelook.com
[UNIT : mS]
MaxMinMaxMin
-30T8300.47T1
-500T91000T2
-50T101000T3
-100T11500.1T4
500T12350220T5
3000T13300T6
-1000T14300T7
The supply voltage of the external system for the Module input should be the same
as the definition of V
Apply the lamp voltage within the LCD operation range. When the back light turns on
before the LCD operation or the LCD turns off before the back light turns off,
the display may momentarily show abnormal screen.
In case of V
please keep the level of input signals low or keep a high impedance.
T14 should be measured after the Module has been fully discharged between power off
and on period.
Interface signal should not be kept at high impedance when the power is on.
= off level,
DD
DD
.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
22 / 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 22
www.panelook.com
www.panelook.com
Global LCD Panel Exchange Center
8. Outline dimension (Front view)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
MODEL LTY[Z]400HM02 Doc. No 05-001-S-100426 Page 23 / 31
Page 23
www.panelook.com
www.panelook.com
Global LCD Panel Exchange Center
Outline dimension (Rear View)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
MODEL LTY[Z]400HM02 Doc. No 05-001-S-100426 Page 24 / 31
Page 24
Global LCD Panel Exchange Center
9. EMI Specification
: -3dB at CISPR22 Class B
This EMI Recommendation is recommended to be measured as SET Condition.
10. UL Approval
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
25 / 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 25
Global LCD Panel Exchange Center
11. Reliability Test
www.panelook.com
QuantityTest conditionItem
Temperature
Step Stress
ESD
(non-operation)
ESD(operation)
contact : ᇹ8 kV ,150Ꮔ/330ᇢ,210Point,1 time/Point
non-contact : ᇹ15 kV,150Ꮔ/330ᇢ,100Point,1 time/Point
4EA0 50ఁ,10Cycle determination
8EA50ఁ, 1000hr (500hr determination)HTOL
4EA0ఁ, 1000hr (500hr determination)LTOL
4EA20 ఁ, continue ~RTOL
4EA70ఁ, 1000hr (500hr determination)HTS
4EA-30ఁ,1000hr (500hr determination)LTS
4EA40ఁ / 95%RH,1000hr (500hr determination)THB
4EA60ఁ / 75%RH, 1000hr (500hr determination)WHTS
4EA-20 ఁ ~ 60 ఁ, 200cycle (100cycle determination)T/C
3EAᇹ10 kV,200Ꮔ/100 ᇢ,9Point,3times/Point
3EA
3EAcontact : ᇹ2kV,200Ꮔ/100,Input Con.Pin,3 times/PinInput Con. ESD
POWER
ON/OFF
PALLET
Vibration
4EA30sec (on) / 30sec(off) : 12,000 times
3EA10~300Hz/1.5G/10minSR, XYZ, 30min/axis Vibration
3EACondition : 11msec, ᇹXYZ 1time/axis 50GShock
1PALLET(15EA)1.05 Grms, 2~200Hz, Random, Z axis 1Hr
1PALLET(15EA)20cm, Bottom, Front, Rear 1timesPALLET Drop
[ Result Evaluation Criteria]
Under the display quality test conditions with normal operation state, these shall
be no change which may affect practical display function.
HTOL/ LTOL : High/Low Temperature Operating Life,
THB : Temperature Humidity Bias
HTS/LTS : High/Low Temperature Storage
WHTS : Wet High Temperature Storage
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
26 / 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 26
Global LCD Panel Exchange Center
12. PACKING
12.1 CARTON (Internal Package)
(1) Packing Form
Corrugated fiberboard box and corrugated cardboard as shock absorber
(2) Packing Method
Packing Pallet Box
www.panelook.com
Cushion Set
12.2 Packing Specification
LCD Packing
Module (15EA)
Pallet
15 ea / (Packing-
Pallet Box)
Direction be able to Open
RemarkSpecificationItem
1. 120Kg/LCD(15ea)
2. 7kg/Cushion Set(2ea)
3. 6.7kg/Packing-Pallet Box(1ea)
4. Cushion Material : EPS
5. Packing Pallet Box Material : SW
10g/ea, Cobalt-dichloride-free2ea/LCDDesiccant (Drier)
Pallet weight : 8kg1 Box / PalletPallet
-VerticalPacking Direction
1150mm x 985mm x 815mmH x V x heightTotal Pallet Size
Pallet(8kg) + Module( 15 x 8 = 120kg) +
142kgTotal Pallet Weight
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Cushion(7kg) + Pallet-BOX(6.7kg) +
Desiccant(0.02kg x 15 = 0.3kg)
27 / 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 27
Global LCD Panel Exchange Center
13. MARKING & OTHERS
A nameplate bearing followed by is affixed to a shipped product at the specified
location on each product.
(1) Parts number : LTY[Z]400HM02-XXX
(2) Revision: One letters
(3) Lot number : X X X X XXX XX X
(4) Nameplate Indication
www.panelook.com
Cell Position No. (In the Glass)
Glass No. (In the one Lot)
Lot No. (Glass)
Month
Year (Note1)
Product code
Line
LTY[Z]400HM02
[[[[[[
LTY[Z]400HM02XXX
(5) Packing box attach
LTY[Z]400HM02-XXX
[[[[[[[[[[#########{{{
80mm
XXXX
15
Week code : 05 29
week
year
40mm
Revision code
Lot number
100mm
Part number
Revision code
Box serial number
0703
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
28 / 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 28
Global LCD Panel Exchange Center
14. General Precautions
14.1 Handling
(a) When the Module is assembled, it should be attached to the system firmly
using all mounting holes. Be careful not to twist and bend the Module.
(b) Because the inverter use high voltage, it should be disconnected from power
before it is assembled or disassembled.
(c) Refrain from strong mechanical shock and / or any force to the Module.
In addition to damage, this may cause improper operation or damage to the Module
and LED back light.
(d) Note that polarizers are very fragile and could be damage easily.
Do not press or scratch the surface harder than a HB pencil lead.
www.panelook.com
(e) Wipe off water droplets or oil immediately. If you leave the droplets for a long
time, staining or discoloration may occur.
(f) If the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth.
(g) Desirable cleaners are water, IPA(Isopropyl Alcohol) or Hexane.
Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid
or Methyl chloride. It might permanent damage to the polarizer due to chemical
reaction.
(h) If the liquid crystal material leaks from the panel, it should be kept away
from the eyes or mouth . In case of contact with hands, legs or clothes, it must
be washed away with soap thoroughly.
(i) Protect the Module from static, or the CMOS Gate Array IC would be damaged.
(j) Use finger-stalls with soft gloves in order to keep display clean during the
incoming inspection and assembly process.
(k) Do not disassemble the Module.
(l) Do not pull or fold the LED FFC.
(m) Do not adjust the variable resistor located on the Module.
(n) Protection film for polarizer on the Module should be slowly peeled off just before use
so that the electrostatic charge can be minimized.
(o) Pins of I/F connector should not be touched directly with bare hands.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
29 / 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 29
Global LCD Panel Exchange Center
14.2 Storage
(a) Do not leave the Module in high temperature, and high humidity for a long time.
It is highly recommended to store the Module with temperature from 0 to 35
and relative humidity of less than 70%.
(b) Do not store the TFT-LCD Module in direct sunlight.
(c) The Module should be stored in a dark place. It is prohibited to apply sunlight or
fluorescent light in storing.
14.3 Operation
www.panelook.com
(a) No Connection or disconnect the Module in the "Power On" condition.
(b) Power supply should always be turned on/off by the "Power on/off sequence"
(c) Module has high frequency circuits. Sufficient suppression to the electromagnetic
interference should be done by system manufacturers. Grounding and shielding methods
may be important to minimize the interference.
(d) The cable between the back light connector and its inverter power supply should
be connected directly with a minimized length. A longer cable between
the back light and the inverter may cause lower luminance of LED and
may require higher startup voltage(Vs).
14.4 Operation Condition Guide
(a) The LCD product should be operated under normal conditions.
Normal condition is defined as below;
- Temperature : 20·15
- Humidity : 55·20%
- Display pattern : continually changing pattern (Not stationary)
(b) If the product will be used in extreme conditions such as high temperature,
humidity, display patterns or operation time etc.., It is strongly recommended
to contact SEC for Application engineering advice. Otherwise, its reliability and
function may not be guaranteed. Extreme conditions are commonly found at
Airports, Transit Stations, Banks, Stock market, and Controlling systems.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
30 / 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Page 30
Global LCD Panel Exchange Center
14.5 Others
(a) Ultra-violet ray filter is necessary for outdoor operation.
(b) Avoid condensation of water. It may result in improper operation or disconnection
of electrode.
(c) Do not exceed the absolute maximum rating value. (supply voltage variation,
input voltage variation, variation in part contents and environmental temperature,
and so on)
Otherwise the Module may be damaged.
(d) If the Module keeps displaying the same pattern for a long period of time,
the image may be "sticked" to the screen.
To avoid image sticking, it is recommended to use a screen saver.
www.panelook.com
(e) This Module has its circuitry PCB's on the rear side and should be handled
carefully in order not to be stressed.
(f) Please contact SEC in advance when you display the same pattern for a long time.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
31 / 31Page05-001-S-100426Doc. NoLTY[Z]400HM02MODEL
www.panelook.com
Loading...