SAMSUNG LTY320AN02 Specification

Global LCD Panel Exchange Center

Customer : DATE : 18 Oct. 2010

SAMSUNG TFT-LCD

MODEL : LTY320AN02

www.panelook.com

Product Information

The information Described in this Specification is Preliminary and can be charged wit hout prior notice

NOTE :

LCD Sales & Marketing Team

Samsung Display Co., Ltd

MODEL LTY320AN02 Doc. No 05-000-S-101018 Page / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

www.panelook.com

Contents

Revision History -------------------------------------------------------------------------------------------- (3)

General Description --------------------------------------------------------------------------------------- (4)

General Information --------------------------------------------------------------------------------------- (4)

1. Absolute Maximum Ratings -------------------------------------------------------------------------- (5)

2. Optical Characteristics --------------------------------------------------------------------------------- (7)

3. Electrical Characteristics -------------------------------------------------------------------------------(10)

3.1 TFT LCD Module

3.2 Back Light Unit

4. Block Diagram ------------------------------------------------------------------------------------------- (12)

5. Input Terminal Pin Assignment --------------------------------------------------------------------- (13)

5.1 Input Signal & Power of Control Board

5.2 LS Bar Input Pin Configuration

5.3 LVDS Interface

5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color

6. Interface Timing ---------------------------------------------------------------------------------------- (18)

6.1 Timing Parameters (DE only mode)

6.2 Timing Diagrams of interface Signal (DE only mode)

6.3 Power ON/OFF Sequence

7. Outline Dimension -------------------------------------------------------------------------------------- (21)

8. Packing -------------------------------------------------------------------------------------------------- (22)

9. Marking & Others --------------------------------------------------------------------------------------- (24)

10. General Precaution ---------------------------------------------------------------------------------- (25)

10.1 Handling

10.2 Storage

10.3 Operation

10.4 Operation Condition Guide

10.5 Others

MODEL LTY320AN02 Doc. No 05-000-S-101018 Page / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

* Revision History

www.panelook.com

Date

Oct.

18,

2010

Rev.

000 - First Issued

Page Summary

MODEL LTY320AN02 Doc. No 05-000-S-101018 Page / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

General Description

Description

LTY320AN02 is a color active matrix liquid crystal display (LCD) that uses amorphous sili con TFT(Thin Film Transistor) as switching components. This model is composed of a TF T LCD panel, a driver circuit and a back light unit. The resolution of a 32.0 “ is 1366 x 768 and this model can display up to 16.7million colors with wide viewing angle of 89 ° or highe r in all directions. This panel is intended to support applications to provide a excellent perf ormance for Flat Panel Display such as Home-alone Multimedia TFT-LCD TV, Display ter minals for AV application products, and High Definition TV (HDTV).

www.panelook.com

Features

RoHS compliance (Pb-free)



High contrast ratio, high aperture ratio, fast response time



PVA mode



Wide viewing angle (±89°)

  WXGA (1366 x 768 pixels) resolution (16:9)  Low Power consumption

84EA LED



LVDS (Low Voltage Differential Signaling) interface



General Information

Items Specification Unit Note

733.6(H

Module Size

Weight 5500(Max) g

Pixel Pitch 0.51075(H) x 0.17025(V) * 3 mm

) x 433.0(V

TYP

29.1(D

MAX

)

TYP

)

±1.0mm

Active Display Area 697.6845(H) x 392.256(V) mm

Surface Treatment Haze 5.5%, Hard-coating (3H)

Display Colors 8 bit- 16.7M colors

Number of Pixels 1366 x 768 pixel

Pixel Arrangement RGB Horizontal stripe

Display Mode Normally Black

Luminance of White

400

cd/m

MODEL LTY320AN02 Doc. No 05-000-S-101018 Page / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

Typ.

www.panelook.com

Global LCD Panel Exchange Center

1. Absolute Maximum Ratings 1-1 Operating Condition

If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable damage to the device.

Item Symbol Min. Max. Unit Note

www.panelook.com

STG

OPR

SUR

NOP

Vdd-1

-20 65

050

065

-50G(4)

- 1.5 G (5)

Power Supply Voltage

Storage temperature

Operating Temperature

Panel surface temperature

Shock ( non - operating )

Note (1) Ta= 25 ± 2 °C

Vibration ( non - operating )

(2) Temperature and relative humidity range are shown in the figure below. a. 93.8 % RH Max. (Ta  40 °C) b. Maximum wet-bulb temperature at 40 °C or less. (Ta  40 °C) c. No condensation (3) Polarizer will not be damaged in this range, even though abnormal visual problems occur

in (4) 11ms, sine wave, one time for ±X, ±Y, ±Z axis (5) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis

SUR

range.

V (1)

(2)

(3)

(40, 93.8)

(50, 50.4)

(65, 27.7)

Fig. Temperature and Relative humidity range

MODEL LTY320AN02 Doc. No 05-000-S-101018 Page / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

1-2 Pallet Storage Condition

We highly recommend to comply with the criteria in the table below.

ITEM Unit Min. Max.

www.panelook.com

Storage Temperature (ć)

Storage Humidity (%rH)

Storage life from S2-In 12 months

- The storage room should be equipped with a good ventilation facility, which

has a temperature controlling system.

- Products should be placed on the pallet, which is away from the wall not on

the floor.

- Prevent products from being exposed to the direct sunlight, moisture, and

water. Be cautious not to pile the products up.

- Avoid storing products in the environment, which other hazardous material

Storage Condition

is placed.

- If products are delivered or kept in the storage facility more than 3 months,

we recommend you to leave products under the condition including a 20ć

temperature and a humidity of 50% for 24 hours.

- If you store semi-manufactured products for more than 3 months, bake the

540

35 75

products under the condition including the 50ć temp. and the 10% humidity

for 24hrs after being used.

MODEL LTY320AN02 Doc. No 05-000-S-101018 Page / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

2. Optical Characteristics

The optical characteristics should be measured in a dark room or equivalent. Measuring equipment :

Item Symbol Condition Min. Typ. Max. Unit Note

Contrast Ratio

(Center of screen)

Rising Tr - 15 70

TOPCON BM-7,SPECTRORADIOMETER SR-3

(Ta = 25 ± 2°C, VDD=12V, fv= 60Hz, f

C/R

www.panelook.com

*2500 5000 -

=148.5MHz, Dim = 100%)

DCLK

(3)

SR-3A

Response

Time

Luminance of White

(Center of screen)

Color

Chromaticity

(CIE 1931)

Color Gamut - - 72 - %

Color Temperature - - 10000 - K

Gamma  - 2.2 -

Viewing

Angle

* marked Items Value does not Specification above when “White stain” occurs at Center Point [Point Ļ of Note 2.]

Brightness Uniformity

Note (1) Test Equipment Setup

(9 Points)

Falling Tf - 8 18

G-to-G

[AVE]

Red

Green

Blue

White

Hor.

Ver.

Tg - 20 -

Ry 0.330

Gx 0.310

Gy 0.610

Bx 0.155

By 0.050

Wx 0.280

Wy 0.285

uni

Normal

L,R=0

U,D=0

Viewing

Angle

C/R10

--30%

330 400 - cd/m

0.645

TYP.

-0.03

79 89 -

TYP.

+0.03

msec

Degree

EZ-Contrast

(5)

RD-80S

(6)

SR-3A

(7),(8)

SR-3A

(7)

SR-3A

(7)

SR-3A

(8)

(4)

SR-3

The measurement should be executed in a stable, windless and dark room between 40min and 60min after lighting the back light at the given temperature for stabilization of the back light. This should be measured in the center of screen.

Single lamp current @ Vdim = 100% Environment condition : Ta = 25 ± 2 °C

MODEL LTY320AN02 Doc. No 05-000-S-101018 Page / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

ķྚྛ

ྞ

ྡ

ྠ

ྜྷ ྜ

ྟ

www.panelook.com

Photo detector Field

SR-3 1°

BM-7 2°

TFT - LCD Module

Note (2) Definition of test point

320 960 1600

Photo detector

Field

The center of the screen

SR-3 : 50໅ BM-7 : 50

໅

LCD Panel

180

540

900

Note (3) Definition of Contrast Ratio (C/R) : Ratio of gray max (Gmax) & gray min (Gmin) at the center point Ļ of the panel

Gmax : Luminance with all pixels white Gmin : Luminance with all pixels black

max

min

Active Area

Test Point

MODEL LTY320AN02 Doc. No 05-000-S-101018 Page / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

Global LCD Panel Exchange Center

Note (4) Definition of 9 points brightness uniformity

Buni



Bmax : Maximum brightness Bmin : Minimum brightness

Note (5) Definition of Response time : Sum of Tr, Tf

(max min)

100

www.panelook.com



max

Display data

Optical Instruments

Response

Note (6) Definition of Luminance of White : Luminance of white at center point Ļ

Note (7) Definition of Color Chromaticity (CIE 1931) Color coordinate of Red, Green, Blue & White at center point Ļ

Note (8) Definition of Viewing Angle : Viewing angle range (C/R 10)

100%

90%

10%

Black (data

off)

White (data on)

White (data off)

TIME

MODEL LTY320AN02 Doc. No 05-000-S-101018 Page / 27

One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!

www.panelook.com

+ 18 hidden pages