SAMSUNG LTN141BT08-003 Specification

Page 1
Global LCD Panel Exchange Center
www.panelook.com
Approval
TO
DATE
: Lenovo
: Sep 26, 2010
MODEL NO. : LTN141BT08-003
NOTE : Green product (Complied with RoHS requirement)
Surface type [ ARC150T ]
Any Modification of Spec is not allowed without SEC’ permission
APPROVED BY :
PREPARED BY : LCD Application Engineering Part , TCS Team
qUoUGv
SAMSUNG ELECTRONICS CO., LTD.
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
04-A01-S-091201
Page
www.panelook.com
/ 29LTN141BT08-002
1
Page 2
Global LCD Panel Exchange Center
2.Optical Characteristics
-------------------
(7)
4.BlockDi
(13)
CONTENTS
Revision History -------------------( 3 )
www.panelook.com
Approval
General Description
1. Absolute Maximum Ratings
1.1 Absolute Ratings of environment
1.2 Electrical Absolute Ratings
3. Electrical Characteristics
3.1 TFT LCD Module
3.2 Backlight Unit
3.3 LED driver
agram
4.1 TFT LCD Module
5. Input Terminal Pin Assignment
5.1 Input Signal & Power
5.2 LVDS Interface
5.3 Timing Diagrams of LVDS For Transmitting
5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color.
5.5 Pixel format
-------------------( 4 )
-------------------( 5 )
-------------------( 10 )
-------------------
-------------------( 14 )
6. Interface Timing
6.1 Timing Parameters
6.2 Timing Diagrams of interface Signal
6.3 Power ON/OFF Sequence
7. Outline Dimension
8. Markings & Others
9. General Precaution
10. EDID
Samsung Secret
Doc.No. Rev.No
-------------------( 20 )
-------------------( 23 )
------------------- ( 24 )
------------------- ( 25 )
-------------------( 27)
04-A01-S-091201
Page
/ 29LTN141BT08-002
2
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 3
Global LCD Panel Exchange Center
21
Power On/Off sequence was updated
www.panelook.com
REVISION HISTORY
Date Revision No. Page
July 6. 2009 P00 All Preliminary spec of LTN141BT08-001 for Shin-2 was issue first.
Lenovo’s product code
P/N : 42T0635 FRU : 42T0636 H/C : 1ZFKS
Nov 18. 2009 A00 - Model name chanaged.
( LTN141BT08-001 Æ LTN141BT08-002 )
Label specification was changed.
Lenovo P/N : 42T0635 Æ 27R2484
FRU P/N : 42T0636 Æ 27R2485
New H/C : 1ZFKS Æ 1ZH2C
Dec 1. 2009 A01 13
Connector number of block diagram was updated.
Summary
.
Approval
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
04-A01-S-091201
Page
/ 29LTN141BT08-002
3
www.panelook.com
Page 4
Global LCD Panel Exchange Center
LTN141BT08
002 is a color active matrix TFT (Thin Film Transistor) liquid crystal display
•
Thin and light weight
3.3V LVDS Interf
Number of pixel
1440 x RGB(3) x 900
pixel
16 : 10
GENERAL DESCRIPTION
DESCRIPTION
­(LCD) that uses amorphous silicon TFT as a switching devices. This model is composed of a TFT LCD panel, a driver circuit and a backlight unit. The resolution of a 14.1" contains 1,440 x 900 pixels and can display up to 262,144 colors. 6 O'clock direction is the Optimum
viewing angle.
FEATURES
• High contrast ratio, high aperture structure
• Wide XGA+ (1440x900 pixels) resolution
• Fast Response Time
• Low power consumption
• LED Back Light
• DE (Data enable) only mode.
•
• On board EDID chip
• Auto Recovery Function
• RoHS Compliance
• Color Gamut 45%
ace
www.panelook.com
Approval
APPLICATIONS
• Notebook PC
• If the usage of this product is not for PC application, but for others, please contact SEC.
GENERAL INFORMATION
Item Specification Unit Note
Display area
Driver element
Display colors
Pixel arrangement
Pixel pitch
Display Mode
303.48(H) x 189.6(V) (14.1” diagonal ) mm
a-Si TFT active matrix
262,144
RGB vertical stripe
0.21075(H) x 0.21075(V) (TYP.) mm 120DPI
Normally white
Surface treatment
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Haze 40, Hard-Coating 2H, ARC150T
04-A01-S-091201
Page
/ 29LTN141BT08-002
4
www.panelook.com
Page 5
Global LCD Panel Exchange Center
Horizontal (H)
314.3
314.8
315.3
mm
Weight
278
295
hard and rigid enough so that the Module would not be twisted or bent by the fixture
Mechanical Information
Item Min. Typ. Max. Unit Note
Vertical (V) 203.0 203.5 204.0 mm
Module
size
Depth (D)
www.panelook.com
-3.33.5mm
-3.63.8mm
Approval
Excluding tape
thickness
Including tape
thickness
-
1. ABSOLUTE MAXIMUM RATINGS
1.1 ENVIRONMENTAL ABSOLUTE RATINGS
Item Symbol Min. Max. Unit Note
Storage temperate T
Operating temperate
(Temperature of glass surface)
Shock ( non-operating ) Snop -
Vibration (non-operating) Vnop - 2.41 G (4),(5)
Note (1) Temperature and relative humidity range are shown in the figure below.
95 % RH Max. ( 40
Maximum wet - bulb temperature at 39 (2) 3ms, half sine wave, one time for ρX,ρY,ρZ. (3) 18ms, Trapezoidal wave, one time for ൥X,൥Y,൥Z. (4) 5~500 Hz, Random vibration, 30 min for X,Y,Z. (5) At testing Vibration and Shock, the fixture in holding the Module to be tested have to be
O
C  Ta)
STG
T
OPR
-20 60
050
O
C or less. (Ta > 40 OC) No condensation.
g
qC
qC
210
G
50 (3),(5)
(1)
(1)
(2),(5)
.
100
-40 -20 0 20 40 60 80
Relative Humidity ( %RH)
95
80
60
40
20
Operating Range
8
Storage Range
5
0
Temperature (OC)
Samsung Secret
Doc.No. Rev.No
04-A01-S-091201
Page
/ 29LTN141BT08-002
5
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 6
Global LCD Panel Exchange Center
1.2 ELECTRICAL ABSOLUTE RATINGS
www.panelook.com
Approval
(1) TFT LCD MODULE
Item Symbol Min. Max. Unit Note
Power Supply Voltage V
Logic Input Voltage V
NOTE (1) Within Ta ( 25 ρ 2OC )
VDD =3.3V, VSS = GND = 0V
DD VDD -0.3 VDD + 0.3 V (1)
IN VDD -0.3 VDD + 0.3 V (1)
Samsung Secret
Doc.No. Rev.No
04-A01-S-091201
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Page
/ 29LTN141BT08-002
6
www.panelook.com
Page 7
Global LCD Panel Exchange Center
ld b
ith th
(5)
C
Average Luminance
IF=17.0mA
(1),(5)
GX0.300
0.330
0.360
WX0.283
0.313
0.343
V
I
H
15
G
L
80%
(6)
2. OPTICAL CHARACTERISTICS
The following items are measured under stable conditions. The optical characteristics shou Measuring equipment : TOPCON SR-3
e measuredin a dark room or equivalent state w
* Ta = 25 r 2 qC, VDD=3.3V, fv= 60Hz, fDCLK = 106.89MHz, IF = 17.0 mArms
www.panelook.com
Approval
e methods showninNote
.
Item Symbol
ontrast Ratio
(5 Points)
Response
Time at 25୅
Rising
Falling
of White (5P average)
Red
Green
Color
Chromaticity
( CIE )
Blue
Conditio
n
Min. Typ. Max Unit Note
CR 180 250 - - (1), (2), (5)
T
R+Tf - 16 25 msec (1), (3)
Y
L,AVE 250 300 - cd/m
2
(1), (4)
Normal
R
X 0.547 0.577 0.607
Viewing
Angle
RY 0.306 0.336 0.366
I = 0 T = 0
-
SR-3
GY 0.518 0.548 0.578
B
X 0.112 0.142 0.172
B
Y 0.090 0.120 0.150
White
Y 0.299 0.329 0.359
W
T
L
Hor.
T
Viewing
Angle
H
CR t 10
er.
IL
13 Points
White Variation
G
L
5 Points
White Variation
Samsung Secret
Doc.No. Rev.No
-(7)
-45-
-45-
-
-
Degree s
(1), (5)
SR-3
-35-
60% - - - (6)
---
04-A01-S-091201
Page
/ 29LTN141BT08-002
7
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 8
Global LCD Panel Exchange Center
T
Gray 48 (TFT ON)
Optical
(720)
(1080)
(li
)
www.panelook.com
Note 1) Definition of Viewing Angle : Viewing angle range( 10 dC/R, 100 dC/R )
Normal Line
o
, T = 0
o
I = 0
L
T R
T
L
xy
o
=90
I L
I H
12 O’clock direction
IH= 90
6 O’clock direction
IL= 90
o
x'y'
TR=90
Note 2) Definition of Contrast Ratio (CR) : Ratio of gray max (Gmax) ,gray min (Gmin)
at 5 points(4, 5, 7, 9, 10)
CR(4) + CR(5) + CR(7) + CR(9) + CR(10)
CR =
5
Approval
o
o
Points : , , , , at the figure of Note (6).
4 9
5
7
10
Note 3) Definition of Response time :
Gray 32(TFT OFF) Gray 32(TFT OFF)
Display data
White(TFT OFF)
TR
Black(TFT ON)
White(TFT OFF)
TF
100%
90%
Response
10%
0%
Time
Note 4) Definition of Average Luminance of White : measure the luminance of white at center points.
(360)
VIEW AREA
Average Luminance of White ( YL )
10
9
(225)
L = YL7
Y
5
7
4
: test point
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
04-A01-S-091201
(450)
(675)
nes
Page
/ 29LTN141BT08-002
8
www.panelook.com
Page 9
Global LCD Panel Exchange Center
p
A
p
Minimum luminance of 13 points
2
3
1
Note 5) After stabilizing and leaving the panel alone at a given temperature for 30 min , the measurement
should be executed. Measurement should be executed in a stable, windless,and dark room. 30 min after lighting the backlight. This should be measured in the center of screen.
current : 17m
Lam Environment condition : Ta = 25 r 2 qC
Photo-detector
( TOPCON SR-3 )
www.panelook.com
Field
= 2q
Approval
50 cm
TFT-LCD module
Center of the screen
[ Optical characteristics measurement setup ]
Note 6) Definition of 13 points white variation (G L ), CR variation( CVER ) [ ~ ]
Maximum luminance of 13 points
LCD panel
113
G L =
10mm
11
225
10mm
10mm
360 720
13 12
10
1080
9
8
5
10mm
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
7
4
04-A01-S-091201
6
450
675
(lines)
: test point
Page
/ 29LTN141BT08-002
9
www.panelook.com
Page 10
Global LCD Panel Exchange Center
www.panelook.com
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
ITEM SYMBOL MIN TYP MAX UNIT NOTE
Voltage of Power Supply VDD 3.0 3.3 3.6 V
Differential Input
Voltage for LVDS
Receiver Threshold
Vsync
60Hz F r e q
50Hz u e n c
40Hz y
High
Low
Main Freq
Hsync Freq
Main Freq
Hsync Freq
Main Freq
IH - - +100 mV
V
IL
V
H
F
F
DCLK
FH
FDCLK
F
H
FDCLK MHz
-100 - - mV
53.0 65 KHzHsync Freq
95.3
40.2 51.3 55 KHz
65.12 106.7
57.84 71.4 85.36
55.56
106.89
41.0436.24 44
125
MHz
MHz89.26
KHz
Approval
Ta= 25 r 2qC
V
CM=+1.2V
Rush Current IRUSH --1.5A(4)
Current of
Power Supply
White
Mosaic (2),(3)*b
IDD - 505 - mA
WinXP
- 420 - mA (2),(3)*a
-
Pattern
Max
Pattern
-
606
620
(1dot Inversion)
Note (1) Display data pins and timing signal pins should be connected.( GND = 0V )
V = 60Hz, fDCLK = 101.56MHZ, VDD = 3.3V , DC Current.
(2) f
(3) Power dissipation pattern
*a) White Pattern *b) Mosaic Pattern
VIEW AREA
Display Brightest Gray Level
mA
mA
(2),(3)*c495 -
(2),(3)*d
Display Darkest Gray Level
Samsung Secret
Doc.No. Rev.No
04-A01-S-091201
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Page
10
/ 29LTN141BT08-002
www.panelook.com
Page 11
Global LCD Panel Exchange Center
R2
www.panelook.com
*c) WinXP Pattern
*d) 1dot Inversion Pattern
RGB
R B
Approval
R GB R
G
R
B
G
R B
G
R GB R
G
4) Rush current measurement condition
3.3V
R1 47K
CONTROL SIGNAL
(HIGH to LOW)
12V
C3 1uF
1K
R3
47K
M1 2SK1059
C2
10000pF
M2 2SK1399
FUSE
R B
G
R B
G
G
VDD ( LCD INPUT)
C1 1uF
VDD rising time is 470us
0.9VDD
3.3V
0.1VDD
GND
470us
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
04-A01-S-091201
Page
11
/ 29LTN141BT08-002
www.panelook.com
Page 12
Global LCD Panel Exchange Center
LED Array Voltage
VP
32.035V
VF X 6 LEDs
A
LED driver Manufacturer : PM6600 ( ST )
Output PWM
p
p
Ir
30
mA
3.2 BACK-LIGHT UNIT
White LED chip P/N (Supplier) : NNSW108T ( Nichia co,)
Item Symbol Min. Typ. Max. Unit Note
LED Forward Current IF - 17 20 mA 60 ea
LED Forward Voltage VF - 3.2 3.5 V
www.panelook.com
Approval
Ta= 25 r 2 qC
-
Power Consumption P - 3.46 4.2 W
Operating Life Time Hr 10,000 - - Hr (1)
Note (1) Life time (Hr) of LEDs can be defined as the time in which it continues to operate under the
condition Ta= 25 r 2 qC and IF = 17.0 m
- When the brightness becomes 50% or lower than the original.
rms until one of the following event occurs.
IF X VF X 60LEDs
6 parallel, 10 serial
3.3 LED driver
Item SYMBOL MIN. TYP. MAX. UNIT NOTE
Input Voltage Vin 4.7 - 28 V
Output Voltage Lo - - 40 V
Frequency
Fpwm 100 - 320 Hz (1)
Adjustable Switching
Frequecy
FSW Sync Input Duty
Cycle
Rows Out
Note (1) LED driver can be dimmed via a PWM signal (1% dimming duty-cycle can be managed).
Samsung Secret
ut Maximun
Current
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Fsw 200 - 1000 KHz
D- -40%
--
04-A01-S-091201
Page
12
/ 29LTN141BT08-002
www.panelook.com
Page 13
Global LCD Panel Exchange Center
I2Cb
4. BLOCK DIAGRAM
4.1 TFT LCD Module
www.panelook.com
Approval
LVDS
Input- Connector
20347-340E-12/I-PEX
DC-DC
Converter
Video Signal
Control Signal
VCOM Gamma DVDD AVDD Von/Voff
us
LVDS Input/RSDS Output
EDID
EEPROM
Timing Controller
Gamma Generator
VCOM
Generator
SOURCE PCB
RSDS
Source
Driver
IC
14.1” WXGA+ (1440*3*900)
TFT-LCD Panel
Gate Driver IC
integrated
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
04-A01-S-091201
Page
13
/ 29LTN141BT08-002
www.panelook.com
Page 14
Global LCD Panel Exchange Center
No.Symbol
Function
Polarity
Remarks
6
WPN
WPN
12
O_RxIN1
LVDS Differential Data INPUT (Odd G1
G5,B0
B1)
Negative
25
E_RxIN1+
LVDS Differential Data INPUT (Even G1
G5,B0
B1)
Positive
38
VBL
7V 21V LED Power
www.panelook.com
5. INPUT TERMINAL PIN ASSIGNMENT
5.1. Input Signal & Power (LVDS, Connector : I-PEX, 20347-340E-12)
1 VSS Ground
2 VDD Power supply +3.3V
3 VDD Power supply +3.3V
4 VDD Power supply +3.3V
5 VEDID DDC 3.3V Power
7 CLK EDID Data for clock
8 Data EDID Data for EDID
9 O_RxIN0- LVDS Differential Data INPUT (Odd R0-R5,G0) Negative
10 O_RxIN0+ LVDS Differential Data INPUT (Odd R0-R5,G0) Positive
11 VSS Ground
-
13 O_RxIN1+ LVDS Differential Data INPUT (Odd G1-G5,B0-B1) Positive
14 VSS Ground
15 O_RxIN2- LVDS Differential Data INPUT (Odd B2-B5,Sync,DE) Negative
16 O_RxIN2+ LVDS Differential Data INPUT (Odd B-B5,Sync,DE) Positive
17 VSS Ground
18 O_RxCLK- LVDS Differential Data INPUT (Odd Clock) Negative
19 O_RxCLK+ LVDS Differential Data INPUT (Odd Clock) Positive
20 VSS Ground
21 E_RxIN0- LVDS Differential Data INPUT (Even R0-R5,G0) Negative
22 E_RxIN0+ LVDS Differential Data INPUT (Even R0-R5,G0) Positive
23 VSS Ground
24 E_RxIN1- LVDS Differential Data INPUT (Even G1-G5,B0-B1) Negative
26 VSS Ground
27 E_RxIN2- LVDS Differential Data INPUT (Even B2-B5,Sync,DE) Negative
28 E_RxIN2+ LVDS Differential Data INPUT (Even B2-B5,Sync,DE) Positive
29 VSS Ground
30 E_RxCLK- LVDS Differential Data INPUT (Even Clock) Negative
31 E_RxCLK+ LVDS Differential Data INPUT (Even Clock) Positive
32 PWM LED PWM
33 LED_EN LED Enable
34 GND GND
35 GND GND
36 GND GND
37 VBL 7V ~ 21V LED Power
~
39 VBL 7V ~ 21V LED Power
40 VBL 7V ~ 21V LED Power
-
-
-
Approval
-
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
04-A01-S-091201
Page
14
/ 29LTN141BT08-002
www.panelook.com
Page 15
Global LCD Panel Exchange Center
45
TxIN1
RE113TxIN12
BE0
3
TxIN5
RE519TxIN16
BE4
www.panelook.com
5.2 LVDS Interface : Transmitter DS90C363 or Compatible
LVDS for Odd pixel
Pin No. Name RGB Signal Pin No. Name RGB Signal
44 TxIN0 RO0 12 TxIN11 GO5
45 TxIN1 RO1 13 TxIN12 BO0
47 TxIN2 RO2 15 TxIN13 BO1
48 TxIN3 RO3 16 TxIN14 BO2
1 TxIN4 RO4 18 TxIN15 BO3
3 TxIN5 RO5 19 TxIN16 BO4
Approval
4 TxIN6 GO0 20 TxIN17 BO5
6 TxIN7 GO1 22 TxIN18 Hsync
7 TxIN8 GO2 23 TxIN19 Vsync
9 TxIN9 GO3 25 TxIN20 DE
10 TxIN10 GO4 26 TxCLK IN Clock
LVDS for Even pixel
Pin No. Name RGB Signal Pin No. Name RGB Signal
44 TxIN0 RE0 12 TxIN11 GE5
47 TxIN2 RE2 15 TxIN13 BE1
48 TxIN3 RE3 16 TxIN14 BE2
1 TxIN4 RE4 18 TxIN15 BE3
4 TxIN6 GE0 20 TxIN17 BE5
6 TxIN7 GE1 22 TxIN18 N/C
7 TxIN8 GE2 23 TxIN19 N/C
9 TxIN9 GE3 25 TxIN20 N/C
10 TxIN10 GE4 26 TxCLK IN Clock
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
04-A01-S-091201
Page
15
/ 29LTN141BT08-002
www.panelook.com
Page 16
Global LCD Panel Exchange Center
36
bit
compatible
ODD GREEN2
7
O_RxIN1+
TxOUT1+
11
ODD BLUE5
20
100
:
44
EVEN RED0
EVEN GREEN3
32
EVEN H
www.panelook.com
Approval
LVDS Interface
Graphics controller
-
ODD RED0 ODD RED1 ODD RED2 ODD RED3 ODD RED4
ODD RED5 ODD GREEN0 ODD GREEN1
ODD GREEN3 ODD GREEN4 ODD GREEN5
ODD BLUE0 ODD BLUE1 ODD BLUE2 ODD BLUE3 ODD BLUE4
Hsync
Vsync
Enable
CLOCK
EVEN RED1 EVEN RED2 EVEN RED3 EVEN RED4
EVEN RED5 EVEN GREEN0 EVEN GREEN1 EVEN GREEN2
EVEN GREEN4 EVEN GREEN5
EVEN BLUE0 EVEN BLUE1 EVEN BLUE2 EVEN BLUE3 EVEN BLUE4 EVEN BLUE5
sync
EVEN Vsync
EVEN Enable
EVEN CLOCK
DS90CF363 or
44 45 47 48 1 3 4 6
9 10 12
13 15 16 18 19
22 23 25 26
DS90CF363 or
45 47 48 1 3 4 6 7 9 10 12
13 15 16 18 19 20 22 23 25 26
TxOUT0-
TxOUT0+
TxOUT1-
TxOUT2-
TxOUT2+
TxCLKOUT-
compatible
TxOUT0-
TxOUT0+
TxOUT1-
TxOUT1+
TxOUT2-
TxOUT2+
TxCLKOUT-
F1-VHP50S-A-HF11
41
40
39
38
35
34
33
32
41
40
39
38
35
34
33
7
8
10
13
14
16
17
19
20
21
22
25
26
28
29
O_RxIN0-
100 :
O_RxIN0+
O_RxIN1-
100 :
RxIN2-
100 :
RxIN2+
RxCLK-
RxCLK+TxCLKOUT+
E_RxIN0-
100 :
E_RxIN0+
E_RxIN1-
100 :
E_RxIN1+
E_RxIN2-
100 :
E_RxIN2+
E_RxCLK-
100 :
E_RxCLK+TxCLKOUT+
Note : The LCD Module uses a 100ohm resistor between positive and negative lines of each receiver input.
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
04-A01-S-091201
Page
16
/ 29LTN141BT08-002
www.panelook.com
Page 17
Global LCD Panel Exchange Center
RxOUT20
RxOUT19
RxOUT17
RxOUT18
RxOUT16
RxOUT15
RxOUT14
O_Rx IN2
GG50G3G
G
RxOUT6
RxOUT5
RxOUT3
RxOUT4
RxOUT2
RxOUT1
RxOUT0
E_RxIN0
5.3 Timing Diagrams of LVDS For Transmission
LVDS Receiver : Integrated T-CON
O_TxCLK OUT
0_RxCLK IN
T/7
www.panelook.com
Approval
T
O_Rx IN1
O_RxIN0
E_TxCLK OUT
E_RxCLK IN
E_Rx IN2
E_Rx IN1
DE
RxOUT13 RxOUT12 RxOUT10RxOUT11 RxOUT9 RxOUT8 RxOUT7
RxOUT6 RxOUT5 RxOUT3RxOUT4 RxOUT2 RxOUT1 RxOUT0
G0
T/7
RxOUT20 RxOUT19 RxOUT17RxOUT18 RxOUT16 RxOUT15 RxOUT14
N/C
RxOUT13 RxOUT12 RxOUT10RxOUT11 RxOUT9 RxOUT8 RxOUT7
Vsync B2Hsync B5 B3B4
B
R5
N/C B2N/C B5 B3B4
R4
4B1
R3
2
R2 R1 R0
1
G4B1 G5B0 G3 G2 G1
G0
R5
R4
R3
R2 R1 R0
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
04-A01-S-091201
Page
17
/ 29LTN141BT08-002
www.panelook.com
Page 18
Global LCD Panel Exchange Center
Colors
Red111111000000000000
Red111111000000000000
R63
G
G
n
000000000000010000B2
5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color
www.panelook.com
Approval
Color Display
Black 000000000000000000 -
Blue 000000000000111111 -
Green 000000111111000000 -
Basic
Gray
Scale
Of
Red
Cyan 000000111111111111 -
Magenta111111000000111111 -
Yellow 111111111111000000 -
White 111111111111111111 -
Black 000000000000000000 R0
Dark 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1
n
: ::::::::::::::::::
: ::::::::::::::::::
p
Data Signal
R0 R1 R2 R3 R4 R5 G0 G1 G2 G3 G4 G5 B0 B1 B2 B3 45 B5
010000000000000000 R2
101111000000000000 R61
Gray ScaleRed Green Blue Level
-
R3aR60
Gray
Scale
Of
reen
ray
Scale
Of
Blue
Light 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 R62
Black 000000000000000000 G0
Dark 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 G1
n
: ::::::::::::::::::
: ::::::::::::::::::
p
Light 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 G62
Green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 G63
Black 000000000000000000 B0
Dark 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 B1
: ::::::::::::::::::
: ::::::::::::::::::
p
Light 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 B62
000000010000000000 G2
G3aG60
000000101111000000 G61
B3aB60
000000000000101111 B61
Blue 000000000000111111 B63
Note 1) Definition of gray :
Rn: Red gray, Gn: Green gray, Bn: Blue gray (n=gray level)
Note 2)Input signal: 0 =Low level voltage, 1=High level voltage
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
04-A01-S-091201
Page
18
/ 29LTN141BT08-002
www.panelook.com
Page 19
Global LCD Panel Exchange Center
5.5 Pixel Format in the display
www.panelook.com
Approval
Line 1
Line 900
1
RGB RGB RGB RGB
1440
LTN141BT08-002 Panel
RGB RGB RGB RGB
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
04-A01-S-091201
Page
19
/ 29LTN141BT08-002
www.panelook.com
Page 20
Global LCD Panel Exchange Center
Signal
Item
Symbol
Min.Typ.Max.Unit
Note
www.panelook.com
6. INTERFACE TIMING
6.1 Timing Parameters
Frame Frequency Cycle TV 905 926 1100 Lines
Vertical Active
Display Term
One Line
Scanning Time
Horizontal Active
Display Term
Display
Period
Cycle TH 1596 1924 1940 Clocks
Display
Period
TVD - 900 - Lines
THD - 1440 - Clocks
Approval
6.2 Timing diagrams of interface signal
TVD
DE
DCLK
TC
DE
TV
TH
THD
DATA SIGNALS
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Valid display data (1440 clocks)
04-A01-S-091201
Page
20
/ 29LTN141BT08-002
www.panelook.com
Page 21
Global LCD Panel Exchange Center
T
T
LED Power (V
i
)
T8T
T
f
0஖T3yDDp
www.panelook.com
6.3 Power ON/OFF Sequence
Approval
: To prevent a latch-up or DC operation of the LCD module, the power on/off sequence
should be as the diagram below.
Power ON/OFF Sequence
0.9 V
0V
0.1 V
0 V
n
DD
DD
T1
0.9 LED V
0.1 LED V
Power Supply VDD
2
Signals
VALID
in
in
9
0.9 LED V
0.9 V
T7
3
in
0.1 LED V
DD
0.1 V
in
DD
T4
PWM
T10
T11
B/L Enable
T5
6
Timing (ms) Remarks
V
0.5஖T110
0஖T
0஖T
50
2
150 T
200 T
0 T
10
7
0஖T
0஖T
0஖T
10
0஖T
11
4
5
6
8
9
rising time from 10% to 90%
DD
Delay from V
Delay from valid data OFF to V
to valid data at power ON
DD
OFF at power Of
VDDOFF time for Windows restart
Delay from valid data to B/L enable at power ON
Delay from valid data off to B/L disable at power Off
V
falling time from 90% to 10%
DD
Delay from LED driver Vin rising time 90% to PWM ON
Delay from PWM Off to LED driver Vin falling time 10%
Delay from PWM ON to B/L Enable ON
Delay from B/L Enable Off to PWM Off
Samsung Secret
Timing Parameters and definition
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
04-A01-S-091201
Page
21
/ 29LTN141BT08-002
www.panelook.com
Page 22
Global LCD Panel Exchange Center
www.panelook.com
7. Mechanical Outline Dimension
[ Refer to the next page ]
Approval
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
04-A01-S-091201
Page
www.panelook.com
22
/ 29LTN141BT08-002
Page 23
Global LCD Panel Exchange Center
This page will be replaced with the outline drawing after producing PDF file.
www.panelook.com
Approval
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
04-A01-S-091201
Page
www.panelook.com
23
/ 29LTN141BT08-002
Page 24
Global LCD Panel Exchange Center
Panel No
NOTE 1).This code indicating year is omitted in the products of SESL site
40 mm
)
www.panelook.com
8. Product Markings and Others
A nameplate bearing followed by is affixed to a shipped product at the specified location on each product.
(1)Parts number : LTN141BT08-002 (2)Revision : One letter (3)Control code : One letter (4)Lot number : X X X XXX XX XX
.
Cell ID
Lot ID
Year
Product Code
Line
(5) Product Label Definition
Approval
.
LTN141BT08
0844
P/N 27R2484 FRU 27R2485
MADE IN CHINA
TFT-LCD Product name : LTN141BT08 Lot number : XXXXXXXXXX Revision Code : 002 Inspected work week : 0844(2008 Year, 44 P/N : Lenovo Part Number (27R2484) EC NO : Engineering Change Number (Blank) FRU : Field Replaceable Unit Part Number(27R2485 Header Code : 1ZH2C ( one Z H two C )
xxxxxxxxxxxx1ZH2Cxxxxxx
XXXXXXXXXX 002
EC NO
80 mm
xxx
th
week)
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
04-A01-S-091201
Page
24
/ 29LTN141BT08-002
www.panelook.com
Page 25
Global LCD Panel Exchange Center
(a) When the module is assembled,It should be attached to the system firmly
il lead
with soap.
(j) Do not disassemble the module
thatth
www.panelook.com
9. GENERAL PRECAUTIONS
1. Handling
using selected mounting holes. Be careful not to twist and bend the modules.
(b) Refrain from strong mechanical shock and / or any force to the module. In addition to
damage, this may cause improper operation or damage to the module and CCFT backlight.
(c) Note that polarizers are very fragile and could be easily damaged. Do not press or scratch
the surfaceharder than a HB penc
(d) Wipe off water droplets or oil immediately. If you leave the droplets for a long time,
Staining and discoloration may occur.
(e) If the surface of the polarizer is dirty, clean it using some absorbent cotton or soft cloth.
(f) The desirable cleaners are water, IPA(Isoprophyl Alcohol) or Hexane.
Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It might permanent damage to the polarizer due to chemical reaction.
.
Approval
(g) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or
mouth . In case of contact with hands, legs or clothes, it must be washed away thoroughly
(h) Protect the module from static , it may cause damage to the C-MOS Gate Array IC.
(i) Use fingerstalls with soft gloves in order to keep display clean during the incoming
inspection and assembly process.
.
(k) Do not pull or fold the lamp wire.
(l) Do not adjust the variable resistor which is located on the back side.
(m) Protection film for polarizer on the module shall be slowly peeled off just before use so
e electrostatic charge can be minimized.
(n) Pins of I/F connector shall not be touched directly with bare hands.
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
04-A01-S-091201
Page
www.panelook.com
25
/ 29LTN141BT08-002
Page 26
Global LCD Panel Exchange Center
relative humidity of less than 70%
g
gygg
www.panelook.com
2. STORAGE
(a) Do not leave the module in high temperature, and high humidity for a long time.
It is highly recommended to store the module with temperature from 0 to 35qC and
.
(b) Do not store the TFT-LCD module in direct sunlight.
(c) The module shall be stored in a dark place. It is prohibited to apply sunlight or fluorescent
light during the store.
3. OPERATION
(a) Do not connect,disconnect the module in the “ Power On” condition.
(b) Power supply should always be turned on/off by following item 6.3
“ Power on/off sequence “.
(c) Module has high frequency circuits. Sufficient suppression to the electromagnetic
interference shall be done by system manufacturers. Grounding and shielding methods may be important to minimize the interference.
Approval
(d) The cable between the backlight connector and its inverter power supply shall be a
minimized len and the inverter may cause lower luminance of lamp(CCFT) and may require higher startup voltage(Vs).
4. OTHERS
(a) Ultra-violet ray filter is necessary for outdoor operation.
(b) Avoid condensation of water. It may result in improper operation or disconnection
of electrode.
(c) Do not exceed the absolute maximum rating value. ( the supply voltage variation, input
voltage variation, variation in part contents and environmental temperature, so on) Otherwise the module may be damaged.
(d) If the module displays the same pattern continuously for a long period of time,it can be
the situation when the image “sticks” to the screen.
(e) This module has its circuitry PCB’s on the rear side and should be handled carefully in
order not to be stressed.
th and be connected directly . The longer cable between the backlight
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
04-A01-S-091201
Page
26
/ 29LTN141BT08-002
www.panelook.com
Page 27
Global LCD Panel Exchange Center
www.panelook.com
10. EDID
Approval
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
04-A01-S-091201
Page
www.panelook.com
27
/ 29LTN141BT08-002
Page 28
Global LCD Panel Exchange Center
www.panelook.com
Approval
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
04-A01-S-091201
Page
www.panelook.com
28
/ 29LTN141BT08-002
Page 29
Global LCD Panel Exchange Center
www.panelook.com
Approval
Samsung Secret
Doc.No. Rev.No
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
04-A01-S-091201
Page
www.panelook.com
29
/ 29LTN141BT08-002
Loading...