Page 1
Samsung Secret
GA
Samsung Secret
Approval
Approval
Customer : TCL
SAMSUNG TFT--
SAMSUNG TFT
SAMSUNG TFT-LCD
MODEL
MODEL
MODEL : LTA550HJ07
The Information Described in this Specification is Preliminary and can be changed without
prior notice
NOTE :
LCD
LCD
: LTA550HJ07
: LTA550HJ07
DATE : 08. Apr. 2010
Customer’’
Customer
SIGNATURE
Samsung Electronics Co . , LTD.
s Approval
s Approval
DATE
LCD Business
APPROVED BY
PREPARED BY
DATE
08. Apr. 2010
DATE
08. Apr. 2010
1/ 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 2
Samsung Secret
Contents
Revision History -------------------------------------------------------------------------------------------- (3)
General Description --------------------------------------------------------------------------------------- (4)
General Information --------------------------------------------------------------------------------------- (4)
1. Absolute Maximum Ratings -------------------------------------------------------------------------- (5)
2. Optical Characteristics --------------------------------------------------------------------------------- (6)
3. Electrical Characteristics ------------------------------------------------------------------------------- (9)
3.1 TFT LCD Module
3.2 Back Light Unit
3.3 Inverter Input & Specification
4. Input Terminal Pin Assignment --------------------------------------------------------------------- (12)
4.1 Input Signal & Power
4.2 Inverter Input Pin Configuration
4.3 Inverter Input Power Sequence
4.4 LVDS Interface
4.5 Input Signals, Basic Display Colors and Gray Scale of Each Color
Samsung Secret
5. Interface Timing ---------------------------------------------------------------------------------------- (18)
5.1 Timing Parameters (DE only mode)
5.2 Timing Diagrams of interface Signal (DE only mode)
5.3 Power ON/OFF Sequence
6. Outline Dimension -------------------------------------------------------------------------------------- (21)
7. Reliability test ---------------------------------------------------------------------------------------------(23)
8. Packing --------------------------------------------------------------------------------------------------- (24)
9. Marking & Others --------------------------------------------------------------------------------------- (25)
10. General Precaution ----------------------------------------------------------------------------------- (26)
10.1 Handling
10.2 Storage
10.3 Operation
10.4 Operation Condition Guide
10.5 Others
2/ 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 3
Revision History
Date Rev. No Page Summary
Samsung Secret
Samsung Secret
Mar. 11.
2010
Apr. 08.
2010
000 all First issued
001
Page 9
Page 11
-Add Power consumption of Control board
- Add Power consumption of Backlight
3/ 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 4
Samsung Secret
General Description
Samsung Secret
Description
LTA550HJ07 is a color active matrix liquid crystal display (LCD) that uses amorphous silicon
TFT(Thin Film Transistor) as switching components. This model is composed of a TFT LCD panel,
a driver circuit and a back light unit. The resolution of a 55.0“ is 1920 x 1080 and this model can
display up to 1.07 Billion colors with wide viewing angle of 89° or higher in all directions. This panel
is intended to support applications to provide a excellent performance for Flat Panel Display such
as Home-alone Multimedia TFT-LCD TV and High Definition TV
Features
RoHS compliance (Pb-free)
High contrast ratio & aperture ratio with wide color gamut
SPVA(Super Patterned Vertical Align) mode
Wide viewing angle (±178°)
High speed response
FHD resolution (16:9)
( & Natural Motion (DFR: Double Frame Rate) )
Low Power consumption
Direct Type 16 CCFLs(Cold Cathode Fluorescent Lamp)
DE(Data Enable) mode
4ch LVDS (Low Voltage Differential Signaling) interface (4pixel/clock)
General Information
Module Size
1,286 (H) X 745 (V)
62.5
Antiglare, Hard-coating(3H)Surface Treatment
RGB vertical stripePixel Arrangement
Normally BlackDisplay Mode
450 (Typ.)Luminance of White
UnitSpecificationItems
g18,000 (Max)Weight
mm0.630(H) x 0.630(W)Pixel Pitch
mm1209.6(H) X 680.4(V)Active Display Area
colors1.07 BillionDisplay Colors
pixel1920 x 1080Number of Pixels
cd/m
Note
±1.0mmmm
2
4/ 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 5
Samsung Secret
Samsung Secret
1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.
NoteUnitMax.Min.SymbolItem
Power Supply Voltage
Storage temperature
Operating temperature
Surface temperature
DD
STG
OPR
SUR
X,Y,Z 30
Vibration ( non - operating )
Note (1) Ta= 25 ± 2 °C
(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta ≤ 39 °C)
b. Relative Humidity is 90% or less. (Ta ＞39 °C)
c. No condensation
(3) Although abnormal visual problems can be occurred in T
is not damaged in this range.
(4) 11ms, sine wave, one time for ±X, ±Y, ±Z axis
(5) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis
NOP
SUR
V13.2GND-0.5V
V5-Max. LumDimming Control
60-20T
500T
600T
range, the polarizer
℃
℃
℃
(1)
(2)
(3)
(4)GShock ( non - operating )
(5)G1.5-V
Fig. Temperature and Relative humidity range
5/ 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 6
2. Optical Characteristics
The optical characteristics should be measured in a dark room or equivalent.
Measuring equipment : TOPCON RD-80S, TOPCON SR-3, ELDIM EZ-Contrast
Samsung Secret
Samsung Secret
(Ta = 25 ± 2°C, VDD=12V, fv= 120Hz, f
Contrast Ratio
(Center of screen)
Response
Time
Luminance of White
(Center of screen)
Color
Green
Chromaticity
(CIE 1931)
White
Red
Blue
Rx
= 297.0MHz, Lamp current = 11.5mA)
DCLK
NoteUnitMax.Typ.Min.ConditionSymbolItem
-5,0003,500C/R
-6-TgG-to-G
L
Normal
qL,R =0
0.637
0.326Ry
-450400Y
msec
cd/m
2
(1)
SR-3
(3)
RD-80S
(4)
SR-3
qU,D =0
0.287Gx
Viewing
Angle
TYP.
-0.03
0.607Gy
0.150Bx
TYP.
+0.03
(5),(6)
SR-3
0.055By
0.280Wx
0.290Wy
Hor.
Viewing
Angle
Ver.
White Brightness
Uniformity
(9 Points)
- Test Equipment Setup
The measurement should be executed in a stable, windless and dark room between
40min and 60min after lighting the back light at the given temperature for stabilization
of the back light. This should be measured in the center of screen.
Environment condition : Ta = 25 ± 2 °C
%-72--Color Gamut
K-10,000--Color Temperature
q
L
R
U
D
uni
C/R≥10
-8975
-8975q
Degree
-8975q
-8975q
%25--B
(5)
SR-3
(6)
EZ-Contrast
(2)
SR-3
6/ 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 7
Samsung Secret
Samsung Secret
Field Photo detector
TFT - LCD Module
- Definition of test point
320 960 1600
Photo detector
2°SR-3
1°RD-80S
Field
SR-3 : 50㎝
RD-80S : 50㎝
LCD Panel
The center of the screen
180
540
900
⑨
⑥
⑧
⑤④
Note (1) Definition of Contrast Ratio (C/R)
: Ratio of gray max (Gmax) & gray min (Gmin) at the center point ⑤ of the panel
G
CR
/
max
=
G
min
Gmax : Luminance with all pixels white
Gmin : Luminance with all pixels black
⑦
①②③
Active Area
Test Point
7/ 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 8
Samsung Secret
Samsung Secret
Note (2) Definition of 9 points brightness uniformity (Test pattern : Full White )
Buni
BB
=∗
(max min)
100
B
−
max
Bmax : Maximum brightness
Bmin : Minimum brightness
Note (3) Definition of Response time : Sum of Tr, Tf
Display data
Optical Instruments
Response
100%
90%
10%
0%
Black (data off)
T
R
White (data on)
Black (data off)
T
F
TIME
Note (4) Definition of Luminance of White : Luminance of white at center point ⑤
Note (5) Definition of Color Chromaticity (CIE 1931)
Color coordinate of Red, Green, Blue & White at center point ⑤
Note (6) Definition of Viewing Angle
: Viewing angle range (C/R ≥10)
8/ 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 9
3. Electrical Characteristics
3.1 TFT LCD Module
The connector for display data & timing signal should be connected.
Samsung Secret
Samsung Secret
Ta = 25°C ± 2 °C
NoteUnitMax.Typ.Min.SymbolItem
Voltage of Power Supply
Current of
(a) Black
Power
DD
I
DD
Supply
Vsync Frequency
Hsync Frequency
Main Frequency
Rush Current
V
H
DCLK
RUSH
Note (1) The ripple voltage should be controlled under 10% of VDD.
(2) fV=120Hz, fDCLK = 297.0MHz, V
= 12.0V, DC Current.
DD
(3) Power dissipation check pattern (LCD Module only)
a) Black Pattern b) White Pattern c) H-STRIPE
(1)V13.212.010.8V
10007001000700-(b) White
mA
mA
(2),(3)
mA15001200-(c) H-STRIPE
Watt1814.4-PcPower Consumption (Control)
Hz125120.090f
kHz140135.0100f
MHz310297.0240f
(4)A7--I
(4) Measurement Conditions
100%
90%
10%
GND
Rush Current I
can be measured when T
RUSH
T
RUSH
=470㎲
. is 470㎲.
RUSH
V
DD
9/ 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 10
Samsung Secret
Samsung Secret
3.2 Back Light Unit
The back light unit contains 16 direct-lighting type CCFLs ( Cold Cathode Fluorescent
Lamp )
Ta=25 ± 2°C
Socket
HOT 1
HOT 2
LCD
Inverter
Module
HOT 15
HOT 16
NoteUnitMax.Typ.Min.SymbolItem
(1)Hour--50,000HrOperating Life Time
Note (1) It is defined as the time to take until the brightness reduces to 50% of its original
value.
[Operating condition : Ta = 25±2℃, For single lamp only. ]
10 / 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 11
3.3 Inverter Input Condition & Specification
ConditionsSymbolItems
Specifications
Samsung Secret
Samsung Secret
NoteUnit
Max.Typ.Min.
Input
Voltage
Input
Current
I
RUSH
Vin=24.0V
Vdim =3.3V
V262422-Vin
--
10.72
A
Ta=25±2 °C
(2)
(1)
Lamp
Current
Shut-down
Time
Backlight
On/Off
Dimming
Control
O,MAX
T
_SD
V
DIM
Vdim =3.3 VI
Vin = 24V
Vdim =0~3.3V
11.61110.4
2.01.51.0
mArms
Sec
-
5.25-2.4Vin=24.0 VON
(2)V
0.8-0Vin=24.0 VOFF
--3.3Max Lum
(2)V
0--Min. Lum
(3)%100-20Vin=24.0 VDutyPWM Duty
Note) Power Consumption is measured when 450 [cd/m ] of luminance which is the typical
luminance.
Lamp Current is measured at the point before Lamp.
(1) Max Value of the Power Consumption is measured after 60 min warm-up.
(2) The ripple voltage should be controlled under 10% of Input Signal
- Additional Appendix for Supply Current & Power consumption
Items Symbol Conditions UnitMin. Typ. Max.
Iin _ overshoot
Input
Current
Iin _ saturation
Power
Consumption
(Back light)
* Initial turn-on time : From 0sec to 60min after turn-on
P _ overshoot
P _ saturation
Vin = 24V, Dim=3.3V
(Within 1hr at BLU on)
Vin = 24V, Dim=3.3V
(After 1hr Aging)
Vin = 24V, Dim=3.3V
(Within 1hr at BLU on)
Vin = 24V, Dim=3.3V
(After 1hr Aging)
- 8.3 8.85 A
- 8.06 8.59 A
Watt212.4199.2-
Watt206.2193.4-
11 / 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 12
4. Input Terminal Pin Assignment
Samsung Secret
Samsung Secret
4.1.1 Input Signal & Power Connector : FI-RE41S-HF (JAE/UJU)
DescriptionSymbolPinDescriptionPin
10
21Vdd(12V)1
24Vdd(12V)4
ODD LVDS
SIGNAL
31Rx1[0]P11
Rx1[3]P
Rx1[4]N22Vdd(12V)2
Rx1[4]P23Vdd(12V)3
GND
Rx3[0]N25Vdd(12V)5
Rx3[0]P26No Connection6
Rx3[1]N27GND7
Rx3[1]P28GND8
Rx3[2]N29GND9
Rx3[2]P30Rx1[0]N
GND
Rx3CLK-32Rx1[1]N12
34Rx1[2]N14
ODD LVDS
SIGNAL
Note) No Connection: This PINS are only used for SAMSUNG internal using.
Rx3CLK+33Rx1[1]P13
GND
Rx3[3]N35Rx1[2]P15
Rx3[3]P36GND16
Rx3[4]N37Rx1CLK-17
Rx3[4]P38Rx1CLK+18
GND39GND19
No Connection40Rx1[3]N20
No Connection41
12 / 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 13
Samsung Secret
Samsung Secret
4.1.2 Input Signal & Power Connector : FI-RE51S-HF (JAE/UJU)
DescriptionPinDescriptionPin
10
Rx2[0]N
Rx2[0]P
Rx2[1]N
Rx2[1]P
Rx2[2]N
Rx2[2]P
26Vdd(12V)1
27Vdd(12V)2
28Vdd(12V)3
29Vdd(12V)4
30Vdd(12V)5
31No Connection6
32GND7
33GND8
34GND9
35
3611
3712
3813
EVEN
LVDS
SIGNAL
Rx4[0]P
Rx4[1]N
Rx4[1]P
Rx4[2]N
Rx4[2]P
GND
Rx4CLK-
Rx4CLK+
GND
Rx4[3]N
Rx4[3]P
Rx4[4]N
Rx4[4]P
GND3914
No Connection4015
GND
EVEN
LVDS
SIGNAL
NOTE) No connection : This Pins are only used for SAMSUNG internal using
Rx2CLK-
Rx2CLK+
GND
Rx2[3]N
Rx2[3]P
Rx2[4]N
Rx2[4]P
GND
Rx4[0]N
No Connection4116
No Connection4217
No Connection4318
No Connection4419
LVDS Option * Note(1)4520
No Connection4621
No Connection4722
No Connection4823
No Connection4924
No Connection5025
No Connection51
13 / 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 14
Note) Pin number starts from Right side
PCB
Samsung Secret
Samsung Secret
▼
Pin No. 1 Pin No. 41
#1 #41
#1
#41
▼
Pin No. 1 Pin No. 51
#1
#1
#51
#51
Fig. Connector diagram
a. All GND pins should be connected together and also be connected to the LCD’s
metal chassis.
b. All power input pins should be connected together.
c. All NC pins should be separated from other signal or power.
Note(1) LVDS OPTION : If this PIN HIGH ( 3.3V ) → Normal LVDS format
LOW ( GND ) → JEIDA LVDS format
SEQUENCE : On = VDD(T1) → LVDS Option → Interface Signal(T2)
OFF = Interface Signal(T3) → LVDS Option → VDD
Vin
LVDS
Option
LVDS
Signal
T2
LVDS Option Sequence
T3
14 / 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 15
4.2. Inverter Input Pin Configuration
Pin Configuration(FUNCTION)
Pin No.
Samsung Secret
Samsung Secret
Connector : 20022WR-14B1 (Yeon-ho)
Master
24 V1
24 V2
24 V3
24 V4
24 V5
GND6
GND7
GND8
GND9
GND10
Error Out 11
Backlight On /Off
Dimming Control
14
4.3. Inverter Input Power Sequence
0.9 Vin
Vin (24V)
Dimming Control
( 0 ~ 3.3 V )
0.5sec [Min]
Backlight On/Off
0.1 Vin
0.02sec [Min]
0sec [Min]
[ON:2.4 – 5.25 V, OFF: 0 - 0.8 V]12
[0V:Min, 3.3V:Max]13
NC
0.9 Vin
0.5sec [Min]
2.4V(On level)
0.8V(Off level)
0.1 sec [Min]
Note) SEQUENCE : ON = Vin(24V) > Dimming Control ≥ Backlight On/Off
OFF = Backlight On/Off ≥ Dimming Control > Vin(24V)
15 / 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 16
4.4 LVDS Interface
- LVDS Receiver : Tcon (merged)
- Data Format (JEIDA & Normal)
JEIDA -DATA
Samsung Secret
Samsung Secret
Normal -DATALVDS pin
TxOUT/RxIN0
TxOUT/RxIN1
R4
R5
R6
R7
R8
R9
G4
G5
G6
G7
G8
G9
B4
B5
B6
B7
B8
R0TxIN/RxOUT0
R1TxIN/RxOUT1
R2TxIN/RxOUT2
R3TxIN/RxOUT3
R4TxIN/RxOUT4
R5TxIN/RxOUT6
G0TxIN/RxOUT7
G1TxIN/RxOUT8
G2TxIN/RxOUT9
G3TxIN/RxOUT12
G4TxIN/RxOUT13
G5TxIN/RxOUT14
B0TxIN/RxOUT15
B1TxIN/RxOUT18
B2TxIN/RxOUT19
B3TxIN/RxOUT20
B4TxIN/RxOUT21
TxOUT/RxIN2
TxOUT/RxIN3
TxOUT/RxIN4
B9
HSYNC
VSYNC
DEN
R2
R3
G2
G3
B2
B3
RESERVED
R0
R1
G0
G1
B0
B1
B5TxIN/RxOUT22
HSYNCTxIN/RxOUT24
VSYNCTxIN/RxOUT25
DENTxIN/RxOUT26
R6TxIN/RxOUT27
R7TxIN/RxOUT5
G6TxIN/RxOUT10
G7TxIN/RxOUT11
B6TxIN/RxOUT16
B7TxIN/RxOUT17
RESERVEDTxIN/RxOUT23
R8TxIN/RxOUT28
R9TxIN/RxOUT29
G8TxIN/RxOUT30
G9TxIN/RxOUT31
B8TxIN/RxOUT32
B9TxIN/RxOUT33
RESERVED
RESERVEDTxIN/RxOUT34
16 / 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 17
Samsung Secret
Samsung Secret
4.5 Input Signals, Basic Display Colors and Gray Scale of Each Color
COLOR
BASIC
COLOR
GRAY
SCALE
OF
RED
DISPLAY
(8bit)
MAGENTA
DARK
↑
↓
LIGHT
DATA SIGNAL
BLUEGREENRED
G8
R8
R9
0
0
0
000BLUE
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
:::::::::::::::
G9
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0000000000000000000BLACK
B7B6B5B4B3B2B1B0G7G6G5G4G3G2G1G0R7R6R5R4R3R2R1R0
::::::::::::::::::::::::
:::::::::
GRAY
SCALE
LEVEL
B8
B9
0
0
1
0
1
0
1
0
1
0
0
0
:
:
0
0
0
-000000000000000000000000BLACK
1
-111111110000000000000
0
-000000001111111100000000GREEN
1
-111111111111111100000000CYAN
0
-000000000000000011111111RED
1
-111111110000000011111111
0
-000000001111111111111111YELLOW
1
-111111111111111111111111WHITE
0
R000000
0
R1000000000000000000000001
0
R2000000000000000000000010
:
R3~
R1020
:
0
R1021000000000000000011111101
0
R1022000000000000000011111110
0
R1023000000000000000011111111RED
GRAY
SCALE
OF
GREEN
GRAY
SCALE
OF
BLUE
DARK
↑
↓
LIGHT
DARK
↑
↓
LIGHT
000BLACK
Note) Definition of Gray :
Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level)
Input Signal : 0 = Low level voltage, 1 = High level voltage
0
0
0
0
0
0
0
:
:
:
:::::::
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
00000000000BLACK
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
::::::::::::::::::::::::
:
:::::::::::::::::
:
0
0
0
0
0
0
:
::::::::::::::::::::::::
:
::::::::::::::::::::::::
1
1
1
G00000000000000
0
G1000000000000000100000000
0
G2000000000000001000000000
:
G3~
G1020
:
0
G1021000000001111110100000000
0
G1022000000001111111000000000
0
G1023000000001111111100000000GREEN
0
B0000000000000000000000
0
B1000000010000000000000000
0
B2000000100000000000000000
:
B3~
B1020
:
1
B1021111111010000000000000000
1
B1022111111100000000000000000
1
B1023111111110000000000000000BLUE
17 / 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 18
5. Interface Timing
5.1 Timing Parameters ( DE mode )
Samsung Secret
Samsung Secret
NOTEUnitMAX.TYP.MIN.SYMBOLITEMSIGNAL
Clock
Hsync
Vsync
Frequency
C
H
V
Active
Vertical
Display
Period
VD
Display Term
Vertical
Total
V
Active
Horizontal
Display
Period
HD
Display Term
Horizontal
Total
H
Note) This product is DE mode. But the Hsync & Vsync signal must be inputted
(1) Test Point : TTL control signal and CLK at LVDS Tx input terminal in system
(2) Internal VDD = 3.3V
(3) Spread spectrum
- Modulation rate (max) : ± 1.5 %
- Modulation Frequency : under 100KHz
-MHz310297.02401/T
-KHz140135.0100F
-Hz125120.090F
-Lines-1080-T
-Lines138011251090T
-Clocks-1920-T
-clocks235022002092T
5.2 LVDS Input Data Characteristics
Typ.ITEM SYMBOL Min. Max. UNIT NOTE
Input Data
Position
Input common mode voltage V
Differential Input Voltage |V
FIN=78MHz
t
t
RSRM
RSLM
CM
| 200 600 mV -
ID
- 450 ps
-450 - ps
0.3 1.8 V -
Note) When the skew is measured the Spread Spectrum should be 0%
-
-
-
350
18 / 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 19
5.2 Timing diagrams of interface signal ( DE mode )
TV
Samsung Secret
Samsung Secret
DE
DE
DCLK
DATA
SIGNALS
TVD
TVB
TH
THD
TC
DCLK
DISPLAY
DATA
DE
TC
TCH
TDS TDH
TES
TCL
0.5
V
0.5
V
CC
0.5
V
CC
CC
19 / 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 20
Samsung Secret
5.3 Power ON/OFF Sequence
Samsung Secret
To prevent a latch-up or DC operation of the LCD Module, the power on/off
sequence should be as the diagram below.
0msec<T1≤10msec
0<T2≤50msec
0<T3≤50msec
1000msec≤T4
1000msec≤T5
(Recommend Value)
100msec≤T6
(Recommend Value)
0.5 Vcc
T1 : VDDrising time from 10% to 90%
T2 : The time from V
T3 : The time from valid data off to V
T4 : V
off time for Windows restart
DD
to valid data at power ON.
DD
off at power Off.
DD
T5 : The time from valid data to B/L enable at power ON.
T6 : The time from valid data off to B/L disable at power Off.
The supply voltage of the external system for the Module input should be the same
as the definition of V
DD
.
Apply the lamp voltage within the LCD operation range. When the back light turns on
before the LCD operation or the LCD turns off before the back light turns off,
the display may momentarily show abnormal screen.
In case of V
= off level,
DD
please keep the level of input signals low or keep a high impedance.
T4 should be measured after the Module has been fully discharged between power off
and on period.
Interface signal should not be kept at high impedance when the power is on.
In Case T5 is less than 1000msec and T6 is less than 100msec,
Garbage Display can be seen. (It is not related to electrical function issue, Just for
recommendation to prevent Garbage Display )
20 / 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 21
Page 22
Page 23
7. Reliability Test
Item Test condition Quantity
Samsung Secret
Samsung Secret
Temperature
Step Stress
HTOL 50℃, 500hr determination 4EA
LTOL 0℃, 500hr determination 4EA
HTS 70℃, 500hr determination 4EA
LTS -30℃, 500hr determination 4EA
THB 40℃ / 95%RH, 500hr determination 4EA
WHTS 60℃ / 75%RH, 250hr determination 4EA
Thermal Shock -20 ℃ ~ 60 ℃, 200cycle determination 4EA
ESD
(operation)
Inverter Input
Con. ESD
Vibration 10~300Hz/1.5G/10minSR, XYZ, 30min/axis 3EA
Shock Half Sine, 11msec, ±X,Y 30G, ± Z 30G 1time/axis 3EA
contact : ±10 kV ,150㎊/330Ω,200Point,1 time/Point
non-contact : ±20 kV,150㎊/330Ω,200Point,1 time/Point
-20 ∼ 60℃, 40hr, 5 Cycle determination 4EA
3EA
contact : ±2kV,150㎊/330,Input Con.Pin,3 times/Pin 3EA
PALLET
Vibration
PALLET Drop
1.05Grms 5~200Hz 1hr
4 edge 1face(bottom) 20 cm
1PALLET(9EA)
1PALLET(9EA)
[ Result Evaluation Criteria]
Under the display quality test conditions with normal operation state, these should
be no change which may affect practical display functions.
* HTOL/ LTOL : High/Low Temperature Operating Life
** THB : Temperature Humidity Bias
*** HTS/LTS : High/Low Temperature Storage
**** WHTS : Wet High Temperature Storage
23 / 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 24
8. PACKING
8.1 CARTON (Internal Package)
(1) Packing Form
Corrugated fiberboard box and corrugated cardboard as shock absorber
(2) Packing Method
Packing
-Pallet Box
Cushion-Foam
LCD Module
Samsung Secret
Samsung Secret
Direction be able to open it
Cushion-Foam
Pallet-Plastic
8.2 Packing Specification
LCD Packing
Total Pallet
Weight
9 ea / (Packing-
Pallet Box)
H x V x heightTotal Pallet Size
VerticalPacking Direction
195.9 kg
RemarkSpecificationItem
1. 162 kg / LCD (9ea)
2. 13.4 Kg / Cushion-pallet (2ea)
3. 10.5 Kg / Packing-Pallet Box (1ea)
4. Cushion-pallet Material : EPS
5. Packing-Pallet Box Material : DW4
1. Pallet weight = 10 kg1Box / PalletPallet
1475mm(H) x 1150mm(V) x 995mm(height)
Pallet(10kg) + Module (162 kg) + Cushion
(up + bottom =13.4kg) + Pallet-BOX(10.5kg)
24 / 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 25
Samsung Secret
Samsung Secret
9. MARKING & OTHERS
A nameplate bearing followed by is affixed to a shipped product at the specified
location on each product.
(1) Part number : LTA550HJ07
(2) Revision: Three letters
(3) Lot number : X X X X XXX XX X
Cell Position No. (In the Glass)
Glass No. (In the one Lot)
Lot No. (Glass)
Month
Year (Note1)
Product code
Line
(4) Nameplate Indication
T
C
LTA550HJ07
0925
XXXX
(5) Packing box attach
XXXXXXXXXX XXX
LTA550HJ07
Week code : 09 25
week
year
40mm
Revision code
Lot number
80mm
100mm
Part number
XXX
9
Box serial number
165mm
(6) Others
1. After service part
Lamps cannot be replaced because of the narrow bezel structure.
25 / 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 26
Samsung Secret
10. General Precautions
Samsung Secret
10.1 Handling
(a) When the Module is assembled, it should be attached to the system firmly
using all mounting holes. Be careful not to twist and bend the Module.
(b) Because the inverter use high voltage, it should be disconnected from power
before it is assembled or disassembled.
(c) Refrain from strong mechanical shock and / or any force to the Module.
In addition to damage, this may cause improper operation or damage to the Module
and CCFT back light.
(d) Note that polarizers are very fragile and could be damage easily.
Do not press or scratch the surface harder than a HB pencil lead.
(e) Wipe off water droplets or oil immediately. If you leave the droplets for a long
time, staining or discoloration may occur.
(f) If the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth.
(g) Desirable cleaners are water, IPA(Isopropyl Alcohol) or Hexane.
Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid
or Methyl chloride. It might permanent damage to the polarizer due to chemical
reaction.
(h) If the liquid crystal material leaks from the panel, it should be kept away
from the eyes or mouth . In case of contact with hands, legs or clothes, it must
be washed away with soap thoroughly.
(i) Protect the module from Electrostatic discharge. Otherwise the ASIC IC or
semiconductor would be damaged.
(j) Use finger-stalls with soft gloves in order to keep display clean during the
incoming inspection and assembly process.
(k) Do not disassemble the Module.
(l) Do not disassemble shield case of inverter & LVDS board
(m) Do not connect N.C pins. (Samsung internal use only)
(n) Protection film for polarizer on the Module should be slowly peeled off just before use
so that the electrostatic charge can be minimized. Must put on antistatic glove while
handling a module
(o) Pins of I/F connector should not be touched directly with bare hands.
26 / 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 27
Samsung Secret
Samsung Secret
10.2 Storage
(a) Do not leave the Module in high temperature, and high humidity for a long time.
It is highly recommended to store the Module with temperature from 0 to 35℃
and relative humidity of less than 70%.
(b) Do not store the TFT- L CD Module in direct sunlight.
(c) The Module should be stored in a dark place. It is prohibited to apply sunlight or
fluorescent light in storing.
10.3 Operation
(a) Do not connect or disconnect the Module in the "Power On" condition.
(b) Power supply should always be turned on/off by the "Power on/off sequence"
(c) Module has high frequency circuits. Sufficient suppression to the electromagnetic
interference should be done by system manufacturers. Grounding and shielding methods
may be important to minimize the interference.
(d) The cable between the back light connector and its inverter power supply should
be connected directly with a minimized length. A longer cable between
the back light and the inverter may cause lower luminance of lamp(CCFT) and
may require higher startup voltage(Vs).
10.4 Operation Condition Guide
(a) The LCD product should be operated under normal conditions.
Normal condition is defined as below;
- Temperature : 20±15℃
- Humidity : 55±20%
- Display pattern : continually changing pattern (Not stationary)
(b) If the product will be used in extreme conditions such as high temperature,
humidity, display patterns or operation time etc.., It is strongly recommended
to contact SEC for Application engineering advice. Other wise, its reliability and
function may not be guaranteed. Extreme conditions are commonly found at
Airports, Transit Stations, Banks, Stock market, and Controlling systems.
27 / 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Page 28
Samsung Secret
10.5 Others
(a) Ultra-violet ray filter is necessary for outdoor operation.
(b) Avoid condensation of water. It may result in improper operation or disconnection
of electrode.
(c) Do not exceed the absolute maximum rating value. ( supply voltage variation,
input voltage variation, variation in part contents and environmental temperature,
and so on)
Otherwise the Module may be damaged.
(d) If the Module keeps displaying the same pattern for a long period of time,
the image may be "sticked" to the screen.
To avoid image sticking, it is recommended to use a screen saver.
(e) This Module has its circuitry PCB's on the rear side and should be handled
carefully in order not to be stressed.
(f) Please contact SEC in advance when you display the same pattern for a long time.
Samsung Secret
28 / 28Page06-001-G-20100408Doc. NoLTA550HJ07MODEL
Loading...