SAMSUNG LTI430LA02 Specification

Page 1
Global LCD Panel Exchange Center
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
X
S
LTD
SAMSUNG TFTSAMSUNG TFT--LCDLCD
MODEL MODEL : LTI430LA02: LTI430LA02
www.panelook.com
Samsung Confidential
Product Product InformationInformation
DATE : Aug.13,2010
hwwyv}lkGi
Je-Hwan Oh
DATE
Aug.13,2010
wylwhylkGi
Young-Do Choi
DATE
Aug.13,2010
Application Engineering Part 3, LCD Division
amsung Electronics Co . ,
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
.
www.panelook.com
Page 2
Global LCD Panel Exchange Center
p
)
p
()
6. Interf
(20)
8. Packing
(25)
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
Y
10.3 Operation
www.panelook.com
Contents
Samsung Confidential
Revision History -------------------------------------------------------------------------------------------- (3)
General Description --------------------------------------------------------------------------------------- (4)
General Information --------------------------------------------------------------------------------------- (4)
1. Absolute Maximum Ratings -------------------------------------------------------------------------- (5)
2. Application information for DID (Digital Information Display) ---------------------------------- (7)
tical Characteristics ---------------------------------------------------------------------------------(8
3. O
4. Electrical Characteristics ------------------------------------------------------------------------------ (11)
4.1 TFT LCD Module
4.2 Back Light Unit
4.3 LED Lips Condition & Specification
4.4 Block Diagram
5. Input Terminal Pin Assignment -------------------------------------------------------------------- (15)
5.1 LVDS Connector
5.2 LED Input and Output Pin Configuration
5.3 LED drive DC-DC converter Power Sequence
5.4 LVDS Interface
5.5 Input Signals, Basic Display Colors and Gray Scale of Each Color
ace Timing ----------------------------------------------------------------------------------------
6.1 Timing Parameters (DE mode)
6.2 Timing Diagrams of interface Signal (DE mode)
6.3 Power ON/OFF Sequence
7. Outline Dimension -------------------------------------------------------------------------------------- (23)
---------------------------------------------------------------------------------------------------
9. Marking & Others --------------------------------------------------------------------------------------- (26)
10. General Precaution ------------------------------------------------------------------------------------ (27)
10.1 Handling
10.2 Storage
10.4 Operation Condition Guide
10.5 Others
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 3
Global LCD Panel Exchange Center
Aug
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
Z
* Revision History
www.panelook.com
Samsung Confidential
Date
13,
2010
Rev.
No
000 all First issued
Page Summary
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 4
Global LCD Panel Exchange Center
TFT LCD panel, a driver circuit and a backlight unit. The resolution of a 43.0 is
RoHS compliance (Pb
free)
Low power consumption
Items
Specification
Unit
Note
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
[
www.panelook.com
General Description
Samsung Confidential
Description
LTI430LA02 is a color active matrix liquid crystal display (LCD) that uses amorphous
silicon TFT(Thin Film Transistor) as switching components. This model is composed of a
1920 x 480 and this model can display up to 16.7 million colors with wide viewing angle of 89or higher in all directions. This panel is intended to support applications to provide a excellent performance for Flat Panel Display such as Home-alone Multimedia TFT-LCD TV, Display terminals for AV application products, and Digital Information Display (DID).
Features
-
High contrast ratio, High luminanceSPVA(Super Patterned Vertical Align) modeWide viewing angle (·178¶)High speed response Landscape / Portrait type compatibleFHD (1920 x 480 pixels) resolution (4:1)   White LED BacklightDE(Data Enable) modeLVDS (Low Voltage Differential Signaling) interface (2pixel/clock)
General Information
1096.0(H
Module Size
10.8 (Min), 31.65 (with converter)
Weight 6,000(Max) g Max
Pixel Pitch 0.552(H) x 0.552(V) mm
Active Display Area 1059.84(H) x 264.96(V) mm
Surface Treatment Haze 44% , Hard-coating (3H)
Display Colors 8 bit - 16.7M colors
Number of Pixels 1920 x 480 pixel
Pixel Arrangement RGB vertical stripe
Display Mode Normally Black
Luminance of White 450 (Typ.) cd/m
) x 301.0(V
TYP
TYP
)
· 1.0mm
mm
· 1.0mm
2
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 5
Global LCD Panel Exchange Center
g
(2)
gp
STG
()
p
pgp
T
85
If
460mA-
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
\
Th
1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.
1.1 Environmental absolute Maximum Ratings
Item Symbol Min. Max. Unit Note
www.panelook.com
Samsung Confidential
Power Supply Voltage V
Stora
Glass surface
e temperature T
Center T
CENTER
temperature
(Operation)
T. Uniformity
Shock (non-operating) S
Vibration (non-operating) V
T
nop
nop
1.2 LED Unit absolute Maximum Ratings
Item Symbol Max. Unit Note
erating Temperature
O
Range
Storage Temperature
Range
op -30 ~
TSTG -40 ~ 100
DD
X,Y
GND-0.5 13.2 V (1)
-20 65
050
(2),(5)
-10
-50G(3)
-1.5G(4)
-
-
Junction Temperature Tj 110
Forward Current
Ifp 600 mA -
Vf 185 V -
Forward Voltage
Vfp 202 V -
ermal Resistance,
Junction to PCB
Rth,JS 20 K/W -
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
-
www.panelook.com
Page 6
Global LCD Panel Exchange Center
gp yg
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
]
Note (1) Ta= 25 · 2 ¶C
(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta  39 ¶C) b. Relative Humidity is 90% or less. (Ta > 39 ¶C) c. No condensation
(3) 11ms, sine wave, one time for ·X, ·SG·GG (4) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis
www.panelook.com
Samsung Confidential
Fig. Temperature and Relative humidity range
(5) Definition of test point
5mm
5mm
12
5
LCD Module (Active)
3
T should be less than 10(T = |T
T
CENTER
T
CORNER
: Temperature of the center of the glass surface (Test point 5)
: Temperature of each edge of the glass surface (Test point 1~4)
4
CENTER–TCORNER
| )
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 7
Global LCD Panel Exchange Center
To optimize module s lifetime and function, several operating usages are required.
2. Operating usages under abnormal operating condition. Note (1)
b. Periodical displ
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
^
www.panelook.com
Samsung Confidential
2. Application information for DID (Digital Information Display)
A long-term display like DID application may cause uneven display including image retention.
'
1. Normal operating condition
- Temperature: 20 · 15୅
- Humidity: 55 · 20 %
- Display pattern: moving picture or regular switchover display
Note) Long-term static information image may cause uneven display.
a. Ambient condition
- Well-ventilated place is recommended to set up DID system.
b. Power off and screen saver
- Periodical power-off or screen saver is needed after long-term static display. Note (2)
3. Operating usages to protect uneven display due to long-term static information display a. Suitable operating time for P-DID : under 20 hours a day.
ay contents change from static image to moving picture.
- Liquid crystal refresh time is required.
c. Periodical background color and character (image) color change
- Use different colors for background and character (image), respectively.
- Change colors periodically.
d. Avoid combination of background and character with large different luminance.
Note (1) Abnormal condition means every operating condition except normal operating condition. Note (2) Moving picture or black pattern is strongly recommended for screen saver.
4. Lifetime in this spec is guaranteed only when DID is used under right operating usages.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 8
Global LCD Panel Exchange Center
Luminance of White
YL400
450
d/
2
(6)
(CIE 1931)
Bl
Color Temperature
10000
K
SR-3
(9 Points)
uni
SR-3
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
_
www.panelook.com
3. Optical Characteristics
Samsung Confidential
The optical characteristics should be measured in a dark room or equivalent. Measuring equipment : TOPCON BM-7,SPECTRORADIOMETER SR-3
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast Ratio
(Center of screen)
Response
Time
(Center of screen)
Color
Chromaticity
(Ta = 25 · 2¶C, V
C/R 2000 3000 -
G-to-G Tg - 6 9 msec
Normal
Red
Rx
Ry 0.331
Gx 0.281
Green
Gy 0.596
Bx 0.144
ue
By 0.061
TL,R=0
TU,D=0
Viewing
Angle
TYP.
-0.025
= 12V, f
0.643
= 60Hz, f
-c
TYP.
+0.025
= 114.24 MHz)
(3)
SR-3
(5)
BM-7
m
SR-3
(7),(8)
SR-3
White
Color Gamut - - 72 - %
Hor.
Viewing
Angle
Ver.
Brightness Uniformity
Wx 0.280
Wy 0.290
--
T
L
T
R
T
U
T
D
B
C/R10
79 89 -
79 89 -
79 89 -
79 89 -
--25%
-
Degree
Note (1) Test Equipment Setup
The measurement should be executed in a stable, windless and dark room between 40min and 60min after lighting the backlight at the given temperature for stabilization of the backlight. This should be measured in the center of screen.
(7)
SR-3
(7)
(8)
SR-3
(4)
LED current : TBD mA (for 1ea LED bar) Environment condition : Ta = 25 · 2 ¶C
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 9
Global LCD Panel Exchange Center
SR
3
1
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
`
www.panelook.com
Samsung Confidential
Photo detector Field
-
BM-7
TFT - LCD Module
Note (2) Definition of test point
320 960 1600
2
Photo detector
Field
SR-3 : 50 BM-7 : 50
LCD Panel
The center of the screen
80
240
400
Note (3) Definition of Contrast Ratio (C/R)
: Ratio of gray max (Gmax) & gray min (Gmin) at the center point of the panel
CR
/
G
max
G
min
Gmax : Luminance with all pixels white Gmin : Luminance with all pixels black
Active Area
Test Point
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 10
Global LCD Panel Exchange Center
Color coordinate of Red, Green, Blue &
White at center point
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
XW
Note (4) Definition of 9 points brightness uniformity
www.panelook.com
Samsung Confidential
BB
Buni
Bmax : Maximum brightness Bmin : Minimum brightness
Note (5) Definition of Response time : Sum of Tr, Tf
Display data
Optical Instruments
Response
(max min)
100
100%
90%
10%
0%
B
max
White (data on)
T
R
Black (data off)Black (data off)
T
F
TIME
Note (6) Definition of Luminance of White : Luminance of white at center point
Note (7) Definition of Color Chromaticity (CIE 1931)
Note (8) Definition of Viewing Angle
: Viewing angle range (C/R  10)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 11
Global LCD Panel Exchange Center
(c) N
Pattern
550
630
mA
Note (1) Th
10% of V
100%
DD
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
XX
RUSH
4. Electrical Characteristics
4.1 TFT LCD Module
The connector for display data & timing signal should be connected.
Item Symbol Min. Typ. Max. Unit Note
www.panelook.com
Samsung Confidential
Ta = 25¶C · 2 ¶C
Voltage of Power Supply V
Current
(a) Black
of Power Supply
-
Vsync Frequency f
Hsync Frequency f
Main Frequency f
Rush Current I
DD
I
DD
V
H
DCLK
RUSH
10.8 12.0 13.2 V (1)
- 480 - mA
-
-60-Hz
TBD 40.8 TBD kHz
TBD 114.24 TBD MHz
--3A(4)
e ripple voltage should be controlled under
(2) f
= 60Hz, f
V
= 114.24MHz, VDD= 12.0V, DC Current.
DCLK
(3) Power dissipation check pattern (LCD Module only)
a) Black Pattern b) White Pattern c) N-Pattern
DD
(2),(3)(b) White - 510 - mA
.
(4) Measurement Conditions
V
90%
10% GND
T
=470
Rush Current I
can be measured when T
RUSH
. is 470༕.
RUSH
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 12
Global LCD Panel Exchange Center
g(gg)
Note (1) It is defined as the time to take until the brightness reduces to 50% of its original value
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
XY
4.2 Back Light Unit
The backlight unit contains 112 WLEDs (White Light Emitting Diode).
Item Symbol Min. Typ. Max. Unit Note
Operating Life Time Hr 50,000 - - Hour (1)
[Operating condition : Ta = 25·2୅]
www.panelook.com
Samsung Confidential
Ta=25 · 2¶C
.
LED 56ea
Control board
LCD Module
Converter
LED 56ea
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 13
Global LCD Panel Exchange Center
Specifications
W
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
XZ
4.3 LED Converter Input Condition & Specification
www.panelook.com
Samsung Confidential
Items Symbol Conditions
Unit Note
Min. Typ. Max.
Input
Voltage
Input
Current
Output
Current
Frequency F
Backlight
On/Off
Dimming
Control
Dim freq. f
Vin - 222426 V
Iin
I
LED
OP
Vin = 24.0V
Vdim = 3.3V
Vin = 24.0V
Vdim = 3.3V
- - TBD Adc
135 140 145 mA
mean
Vin = 24.0V 108 120 132 kHz
ON Vin = 24.0V 2.4 - 5.5
V
OFF Vin = 24.0V 0 - 0.8
Max Lum 3.3 - -
V
DIM
V
Min. Lum - - 0
DIM
Vin = 24.0V 150 160 170 Hz
Ta=25·YG¶j
After 1 hour
Note) Power Consumption is measured when 450 [cd/m ] of luminance which is the typical
arm-up
luminance. Lamp Current is measured at the point before Lamp.
Additional Appendix for supply current
Specifications
Items Symbol Conditions
Unit
Min. Typ. Max.
IN=24V, DIM=3.3V
Input
IIN_overshoot
Current
IIN_saturation
(Within 1hr at LED ON)
IN=24V, DIM=3.3V
V
(After 1hr Aging)
V
-TBDTBD
Adc
-TBDTBD
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 14
Global LCD Panel Exchange Center
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
X[
4.4 Block Diagram
www.panelook.com
Samsung Confidential
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 15
Global LCD Panel Exchange Center
11
Rx1[0]P
36
Rx3[3]P
(1)17Rx1CLK
42
No C
(2)
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
X\
() p g ( )
5. Input Terminal Pin Assignment
5.1 Input Signal & Power Connector : JAE/UJU 51 Pin
PIN No. Description PIN No. Description
1 Vdd (12V) 26 Rx3[0]P
2 Vdd (12V) 27 Rx3[1]N
3 Vdd (12V) 28 Rx3[1]P
4 Vdd (12V) 29 Rx3[2]N
5 Vdd (12V) 30 Rx3[2]P
www.panelook.com
Samsung Confidential
6 No Connection 31 GND
7 GND 32 Rx3CLK-
8 GND 33 Rx3CLK+
9GND 34 GND
10 Rx1[0]N 35 Rx3[3]N
12 Rx1[1]N 37 No Connection
13 Rx1[1]P 38 No Connection
14 Rx1[2]N 39 GND
15 Rx1[2]P 40 No Connection
16 GND 41 No Connection
18 Rx1CLK+ 43 No Connection
19 GND 44 No Connection
20 Rx1[3]N 45 LVDS_SEL
21 Rx1[3]P 46 No Connection
22 No Connection 47 No Connection
Odd
LVDS
Signal
-
Odd
LVDS
Signal
onnection
(2)
23 No Connection 48 No Connection
24 GND 49 No Connection
25 Odd LVDS Rx3[0]N 50 No Connection
51 No Connection
Note(1) No Connection :These pins are only used for SAMSUNG internal purpose.
LVDS Option : High (3.3V)  Normal LVDS format
: Low (GND) or Open (N.C)  JEIDA LVDS format
Sequence :On = VDD  LVDS Option  Interface Signal
Off = Interface Signal  LVDS Option  VDD
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
(3)
www.panelook.com
Page 16
Global LCD Panel Exchange Center
Pin No. 1
Pin No. 51
Fig.C
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
X]
Note (3) LVDS Connector
www.panelook.com
Samsung Confidential
PCB
#1
#1
#51
#51
onnectordiagram
a. All GND pins should be connected together and also be connected to the LCD’s
metal chassis. b. All power input pins should be connected together. c. All N.C pins should be separated from other signal or power.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 17
Global LCD Panel Exchange Center
6
GND
g
g
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
X^
5.2. LED Input Pin Configuration
www.panelook.com
Samsung Confidential
Connector : Yeon-ho, 20022WR-14B1
Pin No.
1 Vin (24V)
2
3
4
5
7GND
8GND
9GND
10 GND
11
12 ENA (Converter on/off Control signal)
13
14
Pin Configuration(FUNCTION)
Vin (24V)
Vin (24V)
Vin (24V)
Vin (24V)
No Connection
Dimming Control [0V: Min, 3.3V: Max]
No Connection
5.3 LED drive DC-DC converter Power Sequence
0.9 Vin
20msec [Min]
Vin (24V)
Dimmin
Control
0.5sec [Min]
Converter On/Off
0.1 Vin
0.5sec [Min]
2.4 V
0.1sec [Min]
1.1sec [Min]
0.5sec [Min]
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 18
Global LCD Panel Exchange Center
TxOUT/RxIN1
TxIN/RxOUT13
G6
G4
TxIN/RxOUT20
B5
B3
TxIN/RxOUT26
DEN
DEN
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
X_
TxIN/RxOUT16
B0
B6
www.panelook.com
5.4 LVDS Interface
Samsung Confidential
- LVDS Receiver : Tcon (merged)
- Data Format (JEIDA & Normal) Default LVDS Option : JEIDA
LVDS pin JEIDA -DATA VESA -DATA
TxIN/RxOUT0 R2 R0
TxIN/RxOUT1 R3 R1
TxIN/RxOUT2 R4 R2
TxOUT/RxIN0
TxIN/RxOUT3 R5 R3
TxIN/RxOUT4 R6 R4
TxIN/RxOUT6 R7 R5
TxIN/RxOUT7 G2 G0
TxIN/RxOUT8 G3 G1
TxIN/RxOUT9 G4 G2
TxIN/RxOUT12 G5 G3
TxOUT/RxIN2
TxOUT/RxIN3
TxIN/RxOUT14 G7 G5
TxIN/RxOUT15 B2 B0
TxIN/RxOUT18 B3 B1
TxIN/RxOUT19 B4 B2
TxIN/RxOUT21 B6 B4
TxIN/RxOUT22 B7 B5
TxIN/RxOUT24 HSYNC HSYNC
TxIN/RxOUT25 VSYNC VSYNC
TxIN/RxOUT27 R0 R6
TxIN/RxOUT5 R1 R7
TxIN/RxOUT10 G0 G6
TxIN/RxOUT11 G1 G7
TxIN/RxOUT17 B1 B7
TxIN/RxOUT23 RESERVED RESERVED
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 19
Global LCD Panel Exchange Center
LEVEL
:::::::::::::::::
:
GRAY
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
X`
www.panelook.com
5.5 Input Signals, Basic Display Colors and Gray Scale of Each Color
Samsung Confidential
COLOR
BASIC
COLOR
MAGENTA111111110000000011111111 -
GRAY
SCALE
OF
RED
SCALE
OF
GREEN
GRAY
SCALE
OF
BLUE
DATA SIGNAL
DISPLAY
(8bit)
R0 R1 R2 R3 R4 R5 R6 R7 G0 G1 G2 G3 G4 G5 G6 G7 B0 B1 B2 B3 B4 B5 B6 B7
BLACK 000000000000000000000000 -
BLUE 000000000000000011111111 -
GREEN 000000001111111100000000 -
CYAN 000000001111111111111111 -
RED 111111110000000000000000 -
YELLOW 111111111111111100000000 -
WHITE 111111111111111111111111 -
BLACK 000000000000000000000000 R0
100000000000000000000000 R1
DARK
LIGHT
RED 111111110000000000000000 R255
BLACK 000000000000000000000000 G0
DARK
LIGHT
GREEN 000000001111111100000000 G255
BLACK 000000000000000000000000 B0
DARK
LIGHT
BLUE 000000000000000011111111 B255
010000000000000000000000 R2
:::::: :::::: ::::::
101111110000000000000000 R253
011111110000000000000000 R254
000000001000000000000000 G1
000000000100000000000000 G2
:::::: :::::: ::::::
:::::: :::::: ::::::
000000001011111100000000 G253
000000000111111100000000 G254
000000000000000010000000 B1
000000000000000001000000 B2
:::::: :::::: ::::::
:::::: :::::: ::::::
000000000000000010111111 B253
000000000000000001111111 B254
RED GREEN BLUE
GRAY
SCALE
R3~
R252
G3~
G252
B3~
B252
Note) Definition of Gray :
Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level) Input Signal : 0 = Low level voltage, 1 = High level voltage
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 20
Global LCD Panel Exchange Center
A
Hori
Tes t Point : TTL control signal and CLK at LVDS
Tx
input terminal in system
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
YW
6. Interface Timing
6.1 Timing Parameters (DE only mode)
Signal Item Symbol Min. Typ. Max. Unit Note
www.panelook.com
Samsung Confidential
Clock
Hsync F
Frequency
1/T
Vsync F
C
H
V
TBD 114.24 TBD MHz 2Pix/clk
TBD 40.8 TBD KHz -
- 60 - Hz -
ctive
Vertical
Display
Period
T
VD
- 480 - Lines -
Display Term
Vertical
Total
T
V
TBD 680 TBD Lines -
Active
zontal
Display T
Period
HD
- 1920 - Clocks -
Display Term
Horizontal
Total
T
H
TBD 2800 TBD Clocks -
Note) This product is DE only mode. This input of Hsync & Vsync signal
dose not have an effect on normal operation.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 21
Global LCD Panel Exchange Center
T
T
VB
D
CLK
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
YX
6.2 Timing diagrams of interface signal (DE mode)
DE
www.panelook.com
Samsung Confidential
TV
VD
TH
DE
DATA
SIGNALS
DCLK
THD
TC
TCH
TDS TDH
TCL
TC
0.5 V
CC
DISPLAY
DATA
TES
DE
0.5 V
0.5 V
CC
CC
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 22
Global LCD Panel Exchange Center
sequence
should be as the diagram below
0 T350msec
YU[G}
T1
V
10% to 90%
y
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
YY
yg
p
6.3 Power ON/OFF Sequence
To prevent a latch-up or DC operation of the LCD Module, the power on/off
0<T110msec 0<T250msec
<
1000msecT4
www.panelook.com
Samsung Confidential
.
500msecT5
(Recommend Value)
100msecT6
(Recommend Value)
:
rising time from
DD
T2 : The time from VDDto valid data at power ON. T3 : The time from valid data off to V T4 : V
off time for Windows restart
DD
off at power Off.
DD
T5 : The time from valid data to B/L enable at power ON. T6 : The time from valid data off to B/L disable at power Off.
The supply voltage of the external system for the Module input should be the same
as the definition of V
DD
.
Apply the lamp voltage within the LCD operation range. When the backlight turns on
before the LCD operation or the LCD turns off before the backlight turns off, the display may momentarily show abnormal screen.
In case of V
= off level,
DD
please keep the level of input signals low or keep a high impedance.
T4 should be measured after the Module has been full
discharged betweenpower off
and on period.
Interface signal should not be kept at high impedance when the power is on.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 23
t s{p[ZWshWY kU u W\TWWWTnTXWW_XZ w YZ V Y`
Samsung Confidential
www.panelook.com
www.panelook.com
Global LCD Panel Exchange Center
Front View)
(
Outline Dimension
7.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Page 24
t s{p[ZWshWY kU u W\TWWWTnTXWW_XZ w Y[ V Y`
Samsung Confidential
www.panelook.com
www.panelook.com
Global LCD Panel Exchange Center
Rear View)
(
Outline Dimension
7.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Page 25
Global LCD Panel Exchange Center
Corrugated fiberboard box and corrugated cardboard as shock absorber
Pallet Box
LCD Packing
3. 10.5 Kg / Packing
Pallet Box (1ea)
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
Y\
8. PACKING
8.1 CARTON (Internal Package)
(1) Packing Form
(2) Packing Method
www.panelook.com
Samsung Confidential
Packing
-
Cushion-Foam
LCD Module
Cushion-Foam
Cushion-Foam
LCD Module
Cushion-Foam
Pallet-Plastic
8.2 Packing Specification
Item Specification Remark
Direction be able to open it
1. 156 Kg / LCD (26ea)
26ea / (Packing-
Pallet Box)
Pallet 1Box / Pallet 1. Pallet weight = 10kg
Packing Direction Vertical
Total Pallet Size H x V x height 1475mm(H) x 1150mm(V) x 995mm(height)
Total Pallet Weight 196.5 kg
2. 5 Kg / Cushion-pallet (4ea)
-
4. Cushion-pallet Material : EPS
5. Packing-Pallet Box Material : DW4
Pallet(10kg) + Module(156 kg) + Cushion(20kg) + Pallet-BOX(10.5kg)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 26
Global LCD Panel Exchange Center
Lot No. (Glass)
63OD3
Lot number
L63D3
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
Y]
9. MARKING & OTHERS
A nameplate bearing followed by is affixed to a shipped product at the specified
location on each product.
(1) Part number : LTI430LA02 (2) Revision: Three letters (3) Lot number : X X X X XXX
(4) Nameplate Indication
www.panelook.com
Samsung Confidential
XX X
Cell Position No. (In the Glass) Glass No. (In the one Lot)
Month Year (Note1) Product code Line
LTI430LA02
[[[[[[[[[[ [[[
(5) Packing box attach
OWL7
80mm
[[[[
59
5
Week code : 05 29
week year
40mm
Revision code
100mm
Part number
Box serial number
165mm
(6) Others
1. After service part Lamps cannot be replaced because of the narrow bezel structure.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 27
Global LCD Panel Exchange Center
(b) Because the inverter use high voltage, it should be disconnected from power
(d) Note that polarizers are very fragile and could be damage easily
yg
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
(n) P
film f
Y^
www.panelook.com
10. General Precautions
Samsung Confidential
10.1 Handling
(a) When the Module is assembled, it should be attached to the system firmly
using all mounting holes. Be careful not to twist and bend the Module.
before it is assembled or disassembled.
(c) Refrain from strong mechanical shock and / or any force to the Module.
In addition to damage, this may cause improper operation or damage to the Module and LED back light.
.
Do not press or scratch the surface harder than a HB pencil lead.
(e) Wipe off water droplets or oil immediately. If you leave the droplets for a long
time, staining or discoloration may occur.
(f) If the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth.
(g) Desirable cleaners are water, IPA(Isopropyl Alcohol) or Hexane.
Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It might permanent damage to the polarizer due to chemical reaction.
(h) If the liquid crystal material leaks from the panel, it should be kept away
from the eyes or mouth . In case of contact with hands, legs or clothes, it must be washed away with soap thoroughly.
(i) Protect the module from Electrostatic discharge. Otherwise the ASIC IC or
semiconductor would be damaged.
(j) Use finger-stalls with soft gloves in order to keep display clean during the
incoming inspection and assembly process.
(k) Do not disassemble the Module.
(l) Do not disassemble shield case of inverter & LVDS board
(m) Do not connect N.C pins. (Samsung internal use only)
rotection so that the electrostatic charge can be minimized. Must put on antistatic glove while handling a module
(o) Pins of I/F connector should not be touched directly with bare hands.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
or polarizer on the Module should be slowly peeled off just before use
www.panelook.com
Page 28
Global LCD Panel Exchange Center
y
)
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
Y_
10.2 Storage
(a) Do not leave the Module in high temperature, and high humidity for a long time.
It is highly recommended to store the Module with temperature from 0 to 35 and relative humidity of less than 70%.
(b) Do not store the TFT-LCD Module in direct sunlight.
(c) The Module should be stored in a dark place. It is prohibited to apply sunlight or
fluorescent light in storing.
10.3 Operation
www.panelook.com
Samsung Confidential
(a) Do not connect or disconnect the Module in the "Power On" condition.
(b) Power supply should always be turned on/off by the "Power on/off sequence"
(c) Module has high frequency circuits. Sufficient suppression to the electromagnetic
interference should be done by system manufacturers. Grounding and shielding methods may be important to minimize the interference.
(d) The cable between the back light connector and its inverter power supply should
be connected directly with a minimized length. A longer cable between the back light and the inverter may cause lower luminance of LED(Light Emitted Diode) and may require higher startup voltage(Vs).
10.4 Operation Condition Guide
(a) The LCD product should be operated under normal conditions.
Normal condition is defined as below;
- Temperature : 20·15୅
- Humidity : 55·20%
-Display pattern : continually changing pattern (Not stationary
(b) If the product will be used in extreme conditions such as high temperature,
humidity, display patterns or operation time etc.., It is strongly recommended to contact SEC for Application engineering advice. Otherwise, its reliability and function may not be guaranteed. Extreme conditions are commonly found at
Airports, Transit Stations, Banks, Stock market, and Controlling systems.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 29
Global LCD Panel Exchange Center
of electrode.
(d)
,
() p p y g p gp ,
tvkls s{p[ZWshWY kUGu W\TWWWTnTXWW_XZ w VGY`
Y`
www.panelook.com
10.5 Others
Samsung Confidential
(a) Ultra-violet ray filter is necessary for outdoor operation.
(b) Avoid condensation of water. It may result in improper operation or disconnection
(c) Do not exceed the absolute maximum rating value. ( supply voltage variation,
input voltage variation, variation in part contents and environmental temperature, and so on) Otherwise the Module may be damaged.
If the Module keeps displaying the same pattern for a long period of time
the image may be "sticked" to the screen. To avoid image sticking, it is recommended to use a screen saver.
(e) This Module has its circuitry PCB's on the rear side and should be handled
carefully in order not to be stressed.
(f) Please contact SEC in advance when you display the same pattern for a long time.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...