Page 1
Global LCD Panel Exchange Center
zpnuh{|yl
DATE
wylwhylkGi
DATE
S
LTD
www.panelook.com
SAMSUNG SECRET
Approval SpecApproval Spec
Customer : Changhong
SAMSUNG TFTSAMSUNG TFT--LCDLCD
DATE : 10. Mar. 2011
MODEL MODEL : LTA460HM06: LTA460HM06
Any Modification of Specification is not allowed without SEC's Permission.
NOTE :
hwwyv}hlkGi
CustomerCustomer˅˅s Approvals Approval
DATE
10. Mar. 2011
10. Mar. 2011
LCD Business
amsung Electronics Co . ,
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
.
1/ 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 2
Global LCD Panel Exchange Center
3. Electrical Characteristics
(9)
4.2 Converter Input Pin Configuration
5.2 LVDS Input data Characteristics
www.panelook.com
SAMSUNG SECRET
Contents
Revision History -------------------------------------------------------------------------------------------- (3)
General Description --------------------------------------------------------------------------------------- (4)
General Information --------------------------------------------------------------------------------------- (4)
1. Absolute Maximum Ratings -------------------------------------------------------------------------- (5)
2. Optical Characteristics --------------------------------------------------------------------------------- (6)
-------------------------------------------------------------------------------
3.1 TFT LCD Module
3.2 Back Light Unit
3.3 Converter Input & Specification
4. Input Terminal Pin Assignment --------------------------------------------------------------------- (12)
4.1 Input Signal & Power
4.3 Converter Input Power Sequence
4.4 LVDS Interface
4.5 Input Signals, Basic Display Colors and Gray Scale of Each Color
5. Interface Timing ---------------------------------------------------------------------------------------- (18)
5.1 Timing Parameters (DE only mode)
5.3 Timing Diagrams of interface Signal (DE only mode)
5.4 Power ON/OFF Sequence
6. Outline Dimension -------------------------------------------------------------------------------------- (21)
7. Reliability Test ------------------------------------------------------------------------------------------- (23)
8. Packing --------------------------------------------------------------------------------------------------- (24)
9. Marking & Others --------------------------------------------------------------------------------------- (25)
10. General Precaution ----------------------------------------------------------------------------------- (26)
10.1 Handling
10.2 Storage
10.3 Operation
10.4 Operation Condition Guide
10.5 Others
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
2/ 28
www.panelook.com
Page 3
Global LCD Panel Exchange Center
Revision History
Date Rev. No Page Summary
www.panelook.com
SAMSUNG SECRET
10. Mar.
2011
000 all First issued
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
3/ 28
www.panelook.com
Page 4
Global LCD Panel Exchange Center
TFT LCD panel, a driver circuit and a back light unit
(Pb
)
Edge Type LED (Light Emitted Diode) BLU
p
www.panelook.com
General Description
SAMSUNG SECRET
Description
LTA460HM06 is a color active matrix liquid crystal display (LCD) that uses amorphous
silicon TFT (Thin Film Transistor) as switching components. This model is composed of a
.
The resolution of a 46.0” is 1920 x 1080 and this model can display up to 16.7 Million
colors with wide viewing angle of 89¶ or higher in all directions. This panel is intended to
support applications to provide a excellent performance for Flat Panel Display such as
Home-alone Multimedia TFT-LCD TV and High Definition TV.
Features
RoHS compliance
-free
High contrast ratio & aperture ratio with wide color gamut
SPVA(Super Patterned Vertical Align) mode
Wide viewing angle (·178¶)
High speed response
FHD resolution (16:9)
Low Power consumption
DE (Data Enable) mode
2ch LVDS (Low Voltage Differential Signaling) interface (2pixel/clock)
General Information
Items Specification Unit Note
Module Size
1054.5 (H
Weight 11.8 (Max.) Kg
Pixel Pitch 0.530 (H) x 0.530 (W) mm
Active Display Area 1018.08 (H) x 572.67 (V) mm
Surface Treatment Haze 2%, Anti-glare -
Display Colors 8bit – 16.7M Colors
Number of Pixels 1920 x 1080 Pixel
Pixel Arrangement RGB vertical stripe -
) x 610.8 (V
TYP
32.4 (Max.)
TYP
)
mm
·1.0mm
Display Mode Normally Black -
Luminance of White 400 (Typ.) cd/m
2
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
4/ 28
www.panelook.com
Page 5
Global LCD Panel Exchange Center
temperature
(2),(5)
Note (1) Ta= 25
·
2 C
1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.
Item Symbol Min. Max. Unit Note
www.panelook.com
SAMSUNG SECRET
Power Supply Voltage V
Storage temperature T
Glass surface
(Operation)
Center T
T. Uniformity
DD
STG
OPR
T
GND-0.3 13.2 V(1)
-20 60
050
-10
X, Y - 40
Shock ( non - operating ) S
Vibration ( non - operating ) V
¶
(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta 39 ¶C)
b. Relative Humidity is 90% or less. (Ta > 39 ¶C)
c. No condensation
(3) 11ms, sine wave, one time for ·X, ·Y, ·Z axis
(4) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis
90
nop
Z - 30
nop
- 1.5 G (4)
(2)
G(3)
Fig. Temperature and Relative humidity range
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
5/ 28
www.panelook.com
Page 6
Global LCD Panel Exchange Center
T should be less than
10
(ƸT = | T
–
T
| )
(5) Definition of test point
www.panelook.com
SAMSUNG SECRET
5mm
5mm
12
5
LCD Module (Active)
3
T
: Temperature of the center of the glass surface (Test point 5)
OPR
OPR
T1~ T4 : Temperature of each edge of the glass surface
T
: The highest temperature of the glass surface
MAX
4
MAX
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
6/ 28
www.panelook.com
Page 7
Global LCD Panel Exchange Center
Luminance of White
(4)
Chromaticity
Coatcty
0.03+0.03
SR-3
S
3
Color Temperature
10,000
K
g
y
(2)
gy
B
25%()
www.panelook.com
2. Optical Characteristics
The optical characteristics should be measured in a dark room or equivalent.
Measuring equipment :
(Ta = 25 · 2¶C, VDD=12.0V, fv=60Hz, f
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast Ratio
(Center of screen)
Response
Time
(Center of screen)
Color
(CIE 1931)
G-to-G Tg - 8 - msec
Red
Green
Blue
TOPCON RD-80S, TOPCON SR-3 ,ELDIM EZ-Contrast
=148.5MHz, LED Current = 140 mA )
DCLK
C/R 3,000 4,000 -
Y
L
Normal
Rx
Ry 0.330
Gx 0.310
Gy 0.600
Bx 0.150
By 0.058
TL,R=0
TU,D=0
Viewing
Angle
350 430 - cd/m
0.653
TYP.
-
TYP.
SAMSUNG SECRET
(1)
SR-3
(3)
RD-80S
2
SR-3
(5),(6)
White
Color Gamut - - 72 - %
Hor.
Viewing
Angle
Ver.
htness Uniformit
Bri
(9 Points)
Wx 0.280
Wy 0.290
--
T
L
T
R
T
U
T
D
uni
C/R10
75 89 -
75 89 -
75 89 -
75 89 -
--
-
- Test Equipment Setup
The measurement should be executed in a stable, windless and dark room between
40min and 60min after lighting the back light at the given temperature for stabilization
of the back light. This should be measured in the center of screen.
Environment condition : Ta = 25 · 2 ¶C
Degree
(5)
R-
(6)
EZ-Contrast
SR-3
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
7/ 28
www.panelook.com
Page 8
Global LCD Panel Exchange Center
SR-3
1
ྡ
ྠ
ྟ
ྙ
ྚྛ
ྞ ྜྷ ྜ
www.panelook.com
SAMSUNG SECRET
Photo detector Field
RD-80S
TFT - LCD Module
- Definition of test point
320 960 1600
ദ
2ദ
Photo detector
Field
The center of the screen
SR-3 : 50
RD-80S : 50
EZ-Contrast:0
LCD Panel
༃
180
540
900
Note (1) Definition of Contrast Ratio (C/R)
: Ratio of gray max (Gmax) & gray min (Gmin) at the center point 䐣 of the panel
CR
/
G
max
G
min
Gmax : Luminance with all pixels white
Gmin : Luminance with all pixels black
Active Area
Test Point
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
8/ 28
www.panelook.com
Page 9
Global LCD Panel Exchange Center
Note (4) Definition of Luminance of White : Luminance of white at center point
䐣
Note (2) Definition of 9 points brightness uniformity (Test pattern : Full White)
www.panelook.com
SAMSUNG SECRET
BB
Buni
Bmax : Maximum brightness
Bmin : Minimum brightness
Note (3) Definition of Response time : Sum of Tr, Tf
Display data
Optical Instruments
Response
(max min)
100
100%
90%
10%
0%
B
max
Black (data off)
White (data on)
T
R
Black (data off)
T
F
TIME
GnTTnGaGhGGGGnGGnGOzP
Note (5) Definition of Color Chromaticity (CIE 1931)
Color coordinate of Red, Green, Blue & White at center point 䐣
Note (6) Definition of Viewing Angle
: Viewing angle range (C/R 10)
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
9/ 28
www.panelook.com
Page 10
Global LCD Panel Exchange Center
(c) N
pattern
800
1000
mA
Note (1) Th
10% of V
100%
3. Electrical Characteristics
3.1 TFT LCD Module
The connector for display data & timing signal should be connected.
Item Symbol Min. Typ. Max. Unit Note
www.panelook.com
SAMSUNG SECRET
Ta = 25¶C · 2 ¶C
Voltage of Power Supply V
Current
(a) Black
of Power
Supply
-
Vsync Frequency f
Hsync Frequency f
DD
I
DD
V
H
10.8 12.0 13.2 V (1)
- 500 650 mA
-
45 60 64 Hz
60 67.5 70 kHz
Main Frequency Fdclk 130 148.5 160 MHz
Rush Current I
e ripple voltage should be controlled under
(2) f
V=60Hz, fDCLK =148.5MHz, V
RUSH
= 12.0V, DC Current.
DD
- - 5 A (4)
.
DD
(3) Power dissipation check pattern (LCD Module only)
a) Black Pattern b) White Pattern c) N - Pattern
(2),(3)(b) White - 500 650 mA
(4) Measurement Conditions
V
DD
90%
10%
GND
T
=470༕
RUSH
Rush Current I
can be measured when T
RUSH
. is 470༕.
RUSH
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
10 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 11
Global LCD Panel Exchange Center
Ta= 25
·
2
C
LCD Module
Converter
[Operating condition : Ta = 25
·2
For single lamp only. ]
3.2 Back Light Unit
The back light unit contains Edge type White LEDs (Light Emitting Diode)
www.panelook.com
Control Board
SAMSUNG SECRET
¶
Item Symbol Min. Typ. Max. Unit Note
Operating Life Time Hr 30,000 - - Hour (1)
Note (1) It is defined as the time to take until the brightness reduces to 50% of its original
value.
,
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
11 / 28
www.panelook.com
Page 12
Global LCD Panel Exchange Center
Dimmi
V
Vi
26V
0-3.3
V
y
yg
Power
P
t
Vin 24V, Dim 3.3V
76.8
79.2
Watt
www.panelook.com
3.3 Converter Input Condition & Specification
SAMSUNG SECRET
Items Symbol Conditions
Input Voltage Vin - 22 24 26 V
Input Current I
Output
Current
Backlight
On/Off
ng Range
Dimming Duty
Output
Dimming
Frequency
External Dimming
Range
Dut
External Dimming
Frequency Range
External Dimming
Signal Level
RUSH
I
O,MAX
ON Vin=24.0 V 2.4 - 5.5
OFF Vin=24.0 V 0 - 0.8
_DIM
D max Vin=24V Dim:3.3V 100 - -
D min Vin=24V Dim:0V - 0 -
F
PWM
EX_Dim Min 1 - 100 % (2)
F
EX_PWM
V
PWM
Vin=24.0V
Vdim =3.3V
Vin = 24.0V
V dim =3.3 V
n :22~
Vin=24.0 V - 170 - Hz
Vin=22.0~26.0 V 95 - 200 Hz
High (ON) 2.4 - 5.5
Low (Off) -0.3 - 0.8
Specifications
Min. Typ. Max.
--3.8A
133 140 147 mArms
Unit Note
Ta=25·YG¶j
V
%(2)
Dim Pin(#13)
: Floating
V
Note) Power Consumption is measured when 400 [cd/m ] of luminance which is the typical
luminance.
(1) All data is measured after 120min warm-up.
- Additional Appendix for Supply Current & Power consumption
Items Symbol Conditions Min. Typ. Max. Unit
Iin _ overshoot
Input
Current
Iin _ saturation
P _ Inrush
Consumption
_ overshoo
(Back light)
P _ saturation
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
Vin = 24V, Dim=3.3V
(Within 1hr at BLU on)
Vin = 24V, Dim=3.3V
(After 1hr Aging)
Vin=24.0V, Vdim = 3.3V
=
=
(Within 1hr at BLU on)
Vin = 24V, Dim=3.3V
(After 1hr Aging)
-3.23.3A
-3.13.2A
- - 79.2 Watt
-
- 74.4 76.8 Watt
12 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 13
Global LCD Panel Exchange Center
X
12V
DC
ly
Y]
RE[0]P
E
LVDS Si
]
ZX
NOTE1
X^
ROCLK
Odd LVDS Clock
[Y
NC
N
2)
LVDS OPTION
PIN is HIGH (3.3 V)
LVDS f
www.panelook.com
4. Input Terminal Pin Assignment
SAMSUNG SECRET
4.1. Input Signal & Power Connector : FI-RE51S-HF (JAE)
w z k w z k
XW
XX
power supp
Y
Z
[
\
^
_
`
12V DC power supply
12V DC power supply
12V DC power supply
12V DC power supply
NC NOTE1
GND Ground
GND Ground
GND Ground
RO[0]N Odd LVDS Signal -
RO[0]P Odd LVDS Signal +
Y^
Y_
Y`
ZW
ZY
ZZ
Z[
Z\
Z]
RE[1]N Even LVDS Signal -
RE[1]P Even LVDS Signal +
RE[2]N Even LVDS Signal -
RE[2]P Even LVDS Signal +
GND Ground
ROCLK- Even LVDS Clock -
ROCLK+ Even LVDS Clock +
GND Ground
RE[3]N Even LVDS Signal -
RE[3]P Even LVDS Signal +
ven
gnal +
XY
XZ
X[
X\
X]
X_
X`
YW
YX
YY
YZ
Y[
Y\
RO[1]N Odd LVDS Signal -
RO[1]P Odd LVDS Signal +
RO[2]N Odd LVDS Signal -
RO[2]P Odd LVDS Signal +
GND Ground
-
ROCLK+ Odd LVDS Clock +
GND Ground
RO[3]N Odd LVDS Signal -
RO[3]P Odd LVDS Signal +
NC
NOTE1
NC
GND Ground
RE[0]N Even LVDS Signal -
Z^
Z_
Z`
[W
[X
-
[Z
[[
[\
[]
[^
[_
[`
\W
\X
NC
NC
GND Ground
NC
NC
NC
NC
LVDS_SEL NOTE2
NC
NC
NC
NC
NC
NC NOTE1
NOTE1
NOTE1
Note1) No Connection: These PINS are used only for SAMSUNG. (DO NOT CONNECT)
ote
: If this
Normal
ormat
LOW (GND) JEIDA LVDS format
SEQUENCE : On = V
OFF = Interface Signal(T3) LVDS Option V
DD(T1) LVDS Option Interface Signal(T2)
DD
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
13 / 28
www.panelook.com
Page 14
Global LCD Panel Exchange Center
Pin No. 1
Pin No. 51
Fig.C
Note(3) Pin number starts from Left side
www.panelook.com
SAMSUNG SECRET
PCB
#1 #51
#1
#51
onnectordiagram
a. Power GND pins should be connected to the LCD’s metal chassis.
b. All power input pins should be connected together.
c. All NC pin should be separated from other signal or power.
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
14 / 28
www.panelook.com
Page 15
Global LCD Panel Exchange Center
1
24 V
6
GND
11
E
If use External PWM, Pin 13 Must be N.C
www.panelook.com
4.2. Inverter Input Pin Configuration
Pin Configuration(FUNCTION)
Pin No.
2 24 V
3 24 V
4 24 V
5 24 V
7GND
8GND
9GND
10 GND
SAMSUNG SECRET
Connector : Yeon-ho, 20022WR-14B1
Master
rror Out
12 Backlight On /Off
13 Dimming Control [0V:Min, 3.3V:Max] *Note(1)
14 External PWM [1~100%] *Note(1)
[ON:2.4 – 5.5 V, OFF: 0 - 0.8 V]
Note(1) If use Dimming Control, Pin 14 Must be N.C
4.3. Inverter Input Power Sequence
Note) SEQUENCE : ON = Vin(24V) > Dimming Control Backlight On/Off
OFF = Backlight On/Off Dimming Control > Vin(24V)
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
15 / 28
www.panelook.com
Page 16
Global LCD Panel Exchange Center
LVDS pin
JEIDA
DATA
VESA
DATA
TxIN/RxOUT4
R6
R4
www.panelook.com
4.4 LVDS Interface
- LVDS Receiver : T-con (merged)
- Data Format (JEIDA&VESA)
TxIN/RxOUT0 R2 R0
TxIN/RxOUT1 R3 R1
TxIN/RxOUT2 R4 R2
TxOUT/RxIN0
TxIN/RxOUT3 R5 R3
TxIN/RxOUT6 R7 R5
TxIN/RxOUT7 G2 G0
TxIN/RxOUT8 G3 G1
TxIN/RxOUT9 G4 G2
TxIN/RxOUT12 G5 G3
SAMSUNG SECRET
-
-
TxOUT/RxIN1
TxOUT/RxIN2
TxOUT/RxIN3
TxIN/RxOUT13 G6 G4
TxIN/RxOUT14 G7 G5
TxIN/RxOUT15 B2 B0
TxIN/RxOUT18 B3 B1
TxIN/RxOUT19 B4 B2
TxIN/RxOUT20 B5 B3
TxIN/RxOUT21 B6 B4
TxIN/RxOUT22 B7 B5
TxIN/RxOUT24 HSYNC HSYNC
TxIN/RxOUT25 VSYNC VSYNC
TxIN/RxOUT26 DEN DEN
TxIN/RxOUT27 R0 R6
TxIN/RxOUT5 R1 R7
TxIN/RxOUT10 G0 G6
TxIN/RxOUT11 G1 G7
TxIN/RxOUT16 B0 B6
TxIN/RxOUT17 B1 B7
TxIN/RxOUT23 RESERVED RESERVED
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
16 / 28
www.panelook.com
Page 17
Global LCD Panel Exchange Center
R0R1R2R3R4R5R6R7G0G1G2G3G4G5G6G7B0B1B2B3B4B5B6
B7
RED
SC
:::::::::::::::::
:
G3
Note)
Definition of Gray :
www.panelook.com
4.5 Input Signals, Basic Display Colors and Gray Scale of Each Color
SAMSUNG SECRET
COLOR
BASIC
COLOR
GRAY
SCALE
GRAY
GREEN
GRAY
SCALE
BLUE
DISPLAY
(8bit)
BLACK 000000000000000000000000 -
BLUE 000000000000000011111111 -
GREEN 000000001111111100000000 -
CYAN 000000001111111111111111 -
RED 111111110000000000000000 -
MAGENTA111111110000000011111111 -
YELLOW 111111111111111100000000 -
WHITE 111111111111111111111111 -
BLACK 000000000000000000000000 R0
DARK
OF
LIGHT
RED 111111110000000000000000 R255
BLACK 000000000000000000000000 G0
DARK
ALE
OF
LIGHT
GREEN 000000001111111100000000 G255
BLACK 000000000000000000000000 B0
DARK
OF
LIGHT
BLUE 000000000000000011111111 B255
DATA SIGNAL
RED GREEN BLUE
100000000000000000000000 R1
010000000000000000000000 R2
:::::: :::::: ::::::
:::::: :::::: ::::::
101111110000000000000000 R253
011111110000000000000000 R254
000000001000000000000000 G1
000000000100000000000000 G2
:::::: :::::: ::::::
000000001011111100000000 G253
000000000111111100000000 G254
000000000000000010000000 B1
000000000000000001000000 B2
:::::: :::::: ::::::
:::::: :::::: ::::::
000000000000000010111111 B253
000000000000000001111111 B254
GRAY
SCALE
LEVEL
R3~
R252
~
G252
B3~
B252
Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level)
Input Signal : 0 = Low level voltage, 1 = High level voltage
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
17 / 28
www.panelook.com
Page 18
Global LCD Panel Exchange Center
Horizontal
Period
(1)
() g p y
5. Interface Timing
5.1 Timing Parameters ( DE only mode )
SIGNAL ITEM SYMBOL MIN. TYP. MAX. Unit NOTE
www.panelook.com
SAMSUNG SECRET
Clock
Hsync F
Frequency
Vsync F
1/T
C
H
V
130 148.5 155 MHz -
60 67.5 70 KHz -
48 60 62.5 Hz -
Active
- 1080 - Lines -
Vertical
Display
Period
T
VD
Display Term
Vertical
Total
T
V
1092 1125 1380 Lines -
Active
Display
T
HD
- 1920 - Clocks -
Display Term
Horizontal
Total
T
H
2092 2200 2348 clocks -
Note) This product is DE only mode. The input of Hsync & Vsync signal does
not have an effect on normal operation.
Test Point : TTL control signal and CLK at LVDS Tx input terminal in system
(2) Internal VDD = 3.3V
(3) Spread spectrum
- Modulation rate (max) : · 1.5 %
- Modulation Frequency : under 150 KHz
5.2 LVDS Input Data Characteristics
ITEM SYMBOL Min. Typ. Max. UNIT NOTE
t
Input Data
Position
Input common mode voltage V
Differential Input Voltage |VID| 100 - 600 mV -
=85MHz
F
IN
RSRM
t
RSLM
CM
Note) When the skew is measured the Spread Spectrum should be 0%
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
- - 400 ps
- - 400 ps
0.2 1.2 2.0 V -
18 / 28
www.panelook.com
Page 19
Global LCD Panel Exchange Center
T
D
CLK
{jo
{
{j
WU\G
}
jj
{kz {ko
kjsr
{lz
kl
kpzwsh
kh{h
WU\G
}
jj
WU\G
}
jj
5.3 Timing diagrams of interface signal ( DE only mode )
DE
www.panelook.com
SAMSUNG SECRET
TV
VD
TH
DE
DATA
SIGNALS
THD
TC
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
19 / 28
www.panelook.com
Page 20
Global LCD Panel Exchange Center
sequence
should be as the diagram below.
0 T350ms
T1
V
10% to 90%
y
yg
p
5.4 Power ON/OFF Sequence
To prevent a latch-up or DC operation of the LCD Module, the power on/off
0ms<T110ms
0<T250ms
<
1000msT4
www.panelook.com
SAMSUNG SECRET
500msT5
(Recommend Value)
100msT6
(Recommend Value)
:
rising time from
DD
T2 : The time from VDDto valid data at power ON.
T3 : The time from valid data off to V
T4 : V
off time for Windows restart
DD
off at power Off.
DD
T5 : The time from valid data to B/L enable at power ON.
T6 : The time from valid data off to B/L disable at power Off.
The supply voltage of the external system for the Module input should be the same
as the definition of V
DD
.
Apply the lamp voltage within the LCD operation range. When the back light turns on
before the LCD operation or the LCD turns off before the back light turns off,
the display may momentarily show abnormal screen.
In case of V
= off level,
DD
please keep the level of input signals low or keep a high impedance.
T4 should be measured after the Module has been full
discharged betweenpower off
and on period.
Interface signal should not be kept at high impedance when the power is on.
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
20 / 28
www.panelook.com
Page 21
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 22
Global LCD Panel Exchange Center
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 23
Global LCD Panel Exchange Center
TSS
0~ 50
10cycle determination
4EA
(op
)
A
(p )
ᇹ
15 kV, 200
Ꮔ
/100, 100Point, 1 time/Point
7. Reliability
Item Test condition Quantity
www.panelook.com
SAMSUNG SECRET
,
HTOL
LTOL
HTS
LTS
THB
T/C
ESD
(non-operation)
ESD
eration
POWER
ON/OFF
Vibration 10 ~ 300Hz/1.5G/10minSR, XYZ, 30min/axis 3EA
Shock
C D M : ᇹ10 kV, 150Ꮔ/330 , 9Point, 3times/Point
contact : ᇹ8 kV, 150Ꮔ/330, 100Point, 1 time/Point
non-contact :
Half Sine, 50G, 11msec, ᇹXYZ 1time/axis
50, 500hr determination
0, 500hr determination
70, 500hr determination
-30, 500hr determination
40 / 95%RH, 500hr determination
-20 ~ 60, 100cycle determination
30sec (on) / 30sec(off) : 12,000 times 4EA
8EA
4EA
4EA
4EA
4EA
4EA
3EA
6E
3EA
PALLET
Vibration
PALLET Drop 20cm, 1Angle, 3Edge, 6Face 1PALLET
1.05Grms, Random, z-axis, 30min 1PALLET
[ Result Evaluation Criteria]
Under the display quality test conditions with normal operation state, these should
be no change which may affect practical display functions.
* HTOL/ LTOL : High/Low Temperature Operating Life
** THB : Temperature Humidity Bias
*** HTS/LTS : High/Low Temperature Storage
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
23 / 28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 24
Global LCD Panel Exchange Center
Corrugated fiberboard box and corrugated cardboard as shock absorber
3.8kg / Packing pallet box (1ea)
Total Pallet Size
H x V x height
1270mm(H) x 1150mm(V) x 844mm(height)
8. PACKING
8.1 CARTON (Internal Package)
(1) Packing Form
(2) Packing Method
www.panelook.com
SAMSUNG SECRET
LCD Module
Packing Box
Pallet Plastic
8.2 Packing Specification
Item Specification Remark
Direction to open
1. 10.5 kg / LCD (1kg)
LCD Packing
22ea / (Paking
Pallet Box)
2. 12kg / Cushion- pallet (2ea)
4. Cushion pallet Material : paper
5. Packing pallet box material : DW4
Pallet 1Box / Pallet
Packing Direction Vertical
Total Pallet Weight 259.8 kg
1. Pallet weight = 8.8 kg
Pallet(8.8kg) + Module (168 kg) + Cushion (up
+ bottom =12kg) + Pallet-BOX(8kg)
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
24 / 28
www.panelook.com
Page 25
Global LCD Panel Exchange Center
Lot No. (Glass)
93KP39
Lot
r
D 93 P39
9. MARKING & OTHERS
A nameplate bearing followed by is affixed to a shipped product at the specified
location on each product.
(1) Part number : LTA460HM06
(2) Revision: Three letters
(3) Lot number : X X X X XXX
(4) Nameplate Indication
www.panelook.com
SAMSUNG SECRET
XX X
Cell Position No. (In the Glass)
Glass No. (In the one Lot)
Month
Year (Note1)
Product code
Line
LTA460HM06
[[[[[[[[[[ [[[
(5) Packing box attach
OWD7
Week code : 05 29
week
year
40mm
Revision code
numbe
80mm
100mm
Part number
[[[[
55
Box serial number
165mm
(6) Others
1. After service part
Lamps cannot be replaced because of the narrow bezel structure.
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
25 / 28
www.panelook.com
Page 26
Global LCD Panel Exchange Center
(d) Note that polarizers are very fragile and could be damage easily.
(g) Desirable cleaners are water, IPA (Isopropyl Alcohol) or Hexane
www.panelook.com
10. General Precautions
SAMSUNG SECRET
10.1 Handling
(a) When the Module is assembled, it should be attached to the system firmly
using all mounting holes. Be careful not to twist and bend the Module.
(b) Because the inverter use high voltage, it should be disconnected from power
before it is assembled or disassembled.
(c) Refrain from strong mechanical shock and / or any force to the Module.
In addition to damage, this may cause improper operation or damage to the Module
and CCFL back light.
Do not press or scratch the surface harder than a HB pencil lead.
(e) Wipe off water droplets or oil immediately. If you leave the droplets for a long
time, staining or discoloration may occur.
(f) If the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth.
.
Do not use ketone type materials (ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid
or Methyl chloride. It might permanent damage to the polarizer due to chemical
reaction.
(h) If the liquid crystal material leaks from the panel, it should be kept away
from the eyes or mouth . In case of contact with hands, legs or clothes, it must
be washed away with soap thoroughly.
(i) Protect the module from Electrostatic discharge. Otherwise the ASIC IC or
Semiconductor would be damaged
(j) Use finger-stalls with soft gloves in order to keep display clean during the
incoming inspection and assembly process.
(k) Do not disassemble the Module.
(l) Do not disassemble shield case of inverter & LVDS board.
(m) Do not connect N.C pins. (Samsung internal use only)
(n) Protection film for polarizer on the Module should be slowly peeled off just before use
so that the electrostatic charge can be minimized. Must put on antistatic glove while
handle a module
(o) Pins of I/F connector should not be touched directly with bare hands.
.
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
26 / 28
www.panelook.com
Page 27
Global LCD Panel Exchange Center
idit
70%
ging
gg
g
g
Deli
5
(b) Power supply should always be turned on/off
the
Power on/off sequence
y
ygg
www.panelook.com
10.2 Storage
(a) Do not leave the module in high temperature, and high humidity for a long time.
It is highly recommended to store the module with temperature from 5 to 40 ଝC
and relative hum
(b) Do not store the TFT-LCD module in direct sunlight.
(c) The module shall be stored in a dark place. It is prohibited to apply sunlight or
fluorescent light during the store.
(d) Storage condition of Packing
ITEM UNIT Min. Max.
y of less than
.
SAMSUNG SECRET
Storage Temperature
Storage Humidity (%rH) 35 75
Storage Life 12 months
Storage Condition
Lon
-term
Storage Process
()
-Prohibit direct sunlight
-Ventilation in storehouse and control chan
temperature is within limits of environment
-Put it on pallet and store them with removing from wall.
-Don't wet Out-BOX and avoid rain.
-Without condensation.
-Etc. Avoid harmful Condition
-More than 3 months Storage or Low temp.
very/under
On the 20,50%rH Condition, more than 10hr release.
540
storage
10.3 Operation
(a) Do not connect or disconnect the Module in the "Power On" condition.
by
"
"
(c) Module has high frequency circuits. Sufficient suppression to the electromagnetic
interference should be done by system manufacturers. Grounding and shielding methods
may be important to minimize the interference.
(d) The cable between the back light connector and its inverter power supply should
be connected directl
the back light and the inverter may cause lower luminance of lamp(CCFT) and
may require higher startup voltage(Vs).
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
with a minimized length. A longer cable between
27 / 28
www.panelook.com
Page 28
Global LCD Panel Exchange Center
A
(d) If the Module k
(f) Please contact SEC in advance when you display the same pattern for a long time
10.4 Operation Condition Guide
(a
) The LCD product should be operated under normal conditions.
Normal condition is defined as below;
- Temperature : 20·15
- Humidity : 55·20%
- Display pattern : continually changing pattern (Not stationary)
(b) If the product will be used in extreme conditions such as high temperature,
humidity, display patterns or operation time etc.., It is strongly recommended
to contact SEC for Application engineering advice. Otherwise, its reliability and
function may not be guaranteed. Extreme conditions are commonly found at
irports, Transit Stations, Banks, Stock market, and Controlling systems.
www.panelook.com
SAMSUNG SECRET
10.5 Others
(a) Ultra-violet ray filter is necessary for outdoor operation.
(b) Avoid condensation of water. It may result in improper operation or disconnection
of electrode.
(c) Do not exceed the absolute maximum rating value. ( supply voltage variation,
input voltage variation, variation in part contents and environmental temperature,
and so on)
Otherwise the Module may be damaged.
eeps displaying the same pattern for a long period of time,
the image may be "sticked" to the screen.
To avoid image sticking, it is recommended to use a screen saver.
(e) This Module has its circuitry PCB's on the rear side and should be handled
carefully in order not to be stressed.
.
MODEL LTA460HM06 Doc. No 06-000-G-20110310 Page
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
28 / 28
www.panelook.com
Loading...