10. General Precaution ----------------------------------------------------------------------------------- (26)
10.1 Handling
10.2 Storage
10.3 Operation
10.4 Operation Condition Guide
10.5 Others
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 3
Global LCD Panel Exchange Center
tvklss{h[]WoqW\kUGuW]TWWYTzTXWWXXZw
ZVY_
* Revision History
www.panelook.com
Samsung Secret
Samsung Secret
Date
Dec 10,
2009
Dec 22,
2009
Dec 30,
2009
Jan 13,
2010
Rev.
No
000allFirst Issued
002
PageSummary
Outline Dimension Rear Updated22000
Operating Life Time : Typical 50,000 hr Æ Typical 30,000 hr10001
Module Size D
Additional Note (2) : SLED Life time Test condition.10
MAX
: 29.9 Æ 30.9mm4, 21
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 4
Global LCD Panel Exchange Center
tvklss{h[]WoqW\kUGuW]TWWYTzTXWWXXZw
[VY_
General Description
Description
LTA460HJ05 is a color active matrix liquid crystal display (LCD) that uses amorphous silicon
TFT(Thin Film Transistor) as switching components. This model is composed of a TFT LCD panel,
a driver circuit and a back light unit. The resolution of a 46.0“ is 1920 x 1080 and this model can
display up to 1.07 Billion colors with wide viewing angle of 89¶ or higher in all directions. This panel
is intended to support applications to provide a excellent performance for Flat Panel Display such
as Home-alone Multimedia TFT-LCD TV and High Definition TV
Features
RoHS compliance (Pb-free)
High contrast ratio & aperture ratio with wide color gamut
SPVA(Super Patterned Vertical Align) mode
Wide viewing angle (·178¶)
High speed response
FHD resolution (16:9)
Low Power consumption
Edge Type LED (Light Emitted Diode) BLU
DE (Data Enable) mode
4ch LVDS (Low Voltage Differential Signaling) interface (4pixel/clock)
( & Natural Motion (DFR: Double Frame Rate) )
www.panelook.com
Samsung Secret
Samsung Secret
General Information
ItemsSpecificationUnitNote
Module Size
1076.5(H
Weight11,300 (Max)g
Pixel Pitch0.53025(H) x 0.53025(W)mm
Active Display Area1018.08(H) x 572.67(V)mm
Surface TreatmentHaze 0 %, Hard Coating 3H
Display Colors8 bit + FRC – 1.07 Billioncolors
Number of Pixels1920 x 1080pixel
Pixel ArrangementRGB vertical stripe
Display ModeNormally Black
Luminance of White450 (Typ.)cd/m
) x 634.7(V
TYP
30.9 (D
MAX
)
TYP
)
mm
·1.0mm
2
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 5
Global LCD Panel Exchange Center
tvklss{h[]WoqW\kUGuW]TWWYTzTXWWXXZw
\VY_
1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.
ItemSymbolMin.Max.UnitNote
www.panelook.com
Samsung Secret
Samsung Secret
Power Supply VoltageV
DD
GND-0.513.2V
Dimming ControlMax. Lum-5V
Storage temperatureT
Operating temperatureT
Surface temperatureT
STG
OPR
SUR
-2060
050
060
X,Y-40
Shock ( non - operating )S
Vibration ( non - operating )V
Note (1) Ta= 25 · 2 ¶C
(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta ˺ 39 ¶C)
b. Relative Humidity is 90% or less. (Ta 39 ¶C)
c. No condensation
(3) Although abnormal visual problems can be occurred in T
is not damaged in this range.
(4) 11ms, sine wave, one time for ·X, ·Y, ·Z axis
(5) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis
NOP
Z- 30
NOP
-1.5G(5)
SUR
G(4)
range, the polarizer
(1)
(2)
(3)
Fig. Temperature and Relative humidity range
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 6
Global LCD Panel Exchange Center
tvklss{h[]WoqW\kUGuW]TWWYTzTXWWXXZw
]VY_
www.panelook.com
2. Optical Characteristics
The optical characteristics should be measured in a dark room or equivalent.
Measuring equipment :
(Ta = 25 · 2¶C, VDD=12V, fv= 120Hz, f
ItemSymbolConditionMin.Typ.Max.UnitNote
Contrast Ratio
(Center of screen)
Response
Time
Luminance of White
(Center of screen)
Color
Chromaticity
(CIE 1931)
G-to-GTg
Red
Green
Blue
TOPCON RD-80S, TOPCON SR-3, ELDIM EZ-Contrast
= 297.0MHz, LED Current = 95mA)
DCLK
C/R40005000-
-6-msec
Y
L
Rx
Ry0.331
Normal
qL,R =0
360450-cd/m
0.622
qU,D =0
Gx0.305
Gy0.631
Bx0.154
Viewing
Angle
TYP.
-0.03
TYP.
+0.03
By0.050
Samsung Secret
Samsung Secret
(1)
SR-3
(3)
RD-80S
2
(4)
SR-3
(5),(6)
SR-3
White
Wx0.280
Wy0.290
Color Gamut--72-%
Color Temperature--10,000-K
7589-
7589-
Degree
7589-
7589-
Viewing
Angle
Hor.
Ver.
q
L
q
R
q
U
q
D
C/R˻10
White Brightness
Uniformity
B
uni
--25%
(9 Points)
- Test Equipment Setup
The measurement should be executed in a stable, windless and dark room between
40min and 60min after lighting the back light at the given temperature for stabilization
of the back light. This should be measured in the center of screen.
(5)
SR-3
(6)
EZ-Contrast
(2)
SR-3
Environment condition : Ta = 25 · 2 ¶C
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 7
Global LCD Panel Exchange Center
tvklss{h[]WoqW\kUGuW]TWWYTzTXWWXXZw
^VY_
ྙྚྛ
ྞ
ྡ
ྠ
ྜྷྜ
ྟ
www.panelook.com
Samsung Secret
Samsung Secret
Photo detectorField
SR-32ദ
RD-80S1ദ
TFT - LCD Module
- Definition of test point
3209601600
Photo detector
Field
SR-3 : 50
RD-80S : 50
LCD Panel
The center of the screen
180
540
900
Note (1) Definition of Contrast Ratio (C/R)
: Ratio of gray max (Gmax) & gray min (Gmin) at the center point 㽶 of the panel
G
CR
/
max
G
min
Gmax : Luminance with all pixels white
Gmin : Luminance with all pixels black
Active Area
Test Point
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 8
Global LCD Panel Exchange Center
tvklss{h[]WoqW\kUGuW]TWWYTzTXWWXXZw
_VY_
Note (2) Definition of 9 points brightness uniformity (Test pattern : Full White )
www.panelook.com
Samsung Secret
Samsung Secret
Buni
BB
(max min)
100
B
max
Bmax : Maximum brightness
Bmin : Minimum brightness
Note (3) Definition of Response time : Sum of Tr, Tf
Display data
Optical Instruments
Response
100%
90%
10%
0%
Black (data off)
T
R
White (data on)
Black (data off)
T
F
TIME
Note (4) Definition of Luminance of White : Luminance of white at center point 㽶
Note (5) Definition of Color Chromaticity (CIE 1931)
Color coordinate of Red, Green, Blue & White at center point 㽶
Note (6) Definition of Viewing Angle
: Viewing angle range (C/R ı10)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 9
Global LCD Panel Exchange Center
tvklss{h[]WoqW\kUGuW]TWWYTzTXWWXXZw
`VY_
www.panelook.com
Samsung Secret
Samsung Secret
3. Electrical Characteristics
3.1 TFT LCD Module
The connector for display data & timing signal should be connected.
Ta = 25¶C · 2 ¶C
ItemSymbolMin.Typ.Max.UnitNote
Voltage of Power SupplyV
Current of
Power
Supply
(a) Black
(b) White
(c) Sub V-Stripe-10711200mA
Vsync Frequencyf
Hsync Frequencyf
Main Frequencyf
Rush CurrentI
DD
I
DD
V
H
DCLK
RUSH
10.812.013.2V(1)
-526-mA
-509-mA
95.0120.0125.0Hz
120.0135.0140.0kHz
260.0297.0305.0MHz
--6A(4)
Note (1) The ripple voltage should be controlled under 10% of VDD.
(2) fV=120Hz, fDCLK = 297.0MHz, V
= 12.0V, DC Current.
DD
(3) Power dissipation check pattern (LCD Module only)
a) Black Pattern b) White Pattern c) Sub V-Stripe
(2),(3)
(4) Measurement Conditions
V
100%
DD
90%
10%
GND
T
=470༕
RUSH
Rush Current I
can be measured when T
RUSH
. is 470༕.
RUSH
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 10
Global LCD Panel Exchange Center
tvklss{h[]WoqW\kUGuW]TWWYTzTXWWXXZw
XWVY_
3.2 Back Light Unit
The back light unit contains Edge type White LEDs (Light Emitting Diode)
www.panelook.com
Control Board
LCD Module
Samsung Secret
Samsung Secret
Ta=25 · 2¶C
Converter
ItemSymbolMin.Typ.Max.UnitNote
Operating Life TimeHr-30,000-Hour(1),(2)
Note (1) It is defined as the time to take until the brightness reduces to 50% of its original
value. [Operating condition : Ta = 25·2, For LED Package only. ]
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 11
Global LCD Panel Exchange Center
tvklss{h[]WoqW\kUGuW]TWWYTzTXWWXXZw
XXVY_
3.3 Inverter Input Condition & Specification
ItemsSymbolConditions
www.panelook.com
Specifications
Min.Typ.Max.
Samsung Secret
Samsung Secret
UnitNote
Input
Voltage
Input
Current
LED
Current
Backlight
On/Off
Dimming
Control
PWM
Voltage
PWM
Frequency
Vin-222426V
I
OVER
I
SAT
I
O,MAX
Vin=24.0V
Vdim =3.3V
Vdim =3.3 V9095100mArms
-3.874.85
-3.603.91
ONVin=24.0 V2.4-5.25
OFFVin=24.0 V0-0.8
Max Lum3.3--
V
DIM
Min. Lum--0
Max3.0-5.0
V
PWM
Min0.0-0.4
F
PWM
Vin=24.0 V95-185Hz
Ta=25·YG¶j
OYP
(1)
A
(2)
V(3)
V(3)
V(3)
PWM DutyDutyVin=24.0 V0-100%(4)
Note) Power Consumption is measured when 450 [cd/m ] of luminance which is the typical
luminance.
Lamp Current is measured at the point before Lamp.
(1) Max Value of the Power Consumption is measured during initial turn on time* of the backlight
(2) Max Value of the Power Consumption is measured after 60 min warm-up.
(3) The ripple voltage should be controlled under 10% of Input Signal
(4) Duty = On/(On+Off) * 100
* Initial turn-on time : From 0sec to 60min after turn-on
OnOff
Max
Min
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 12
Global LCD Panel Exchange Center
tvklss{h[]WoqW\kUGuW]TWWYTzTXWWXXZw
XYVY_
www.panelook.com
4. Input Terminal Pin Assignment
Samsung Secret
Samsung Secret
4.1.1 Input Signal & Power Connector : FI-RE41S-HF (JAE/UJU)
PinDescriptionPinSymbolDescription
1Vdd(12V)21
2Vdd(12V)22Rx1[4]N
3Vdd(12V)23Rx1[4]P
4Vdd(12V)24GND
5Vdd(12V)25Rx3[0]N
6No Connection26Rx3[0]P
7GND27Rx3[1]N
8GND28Rx3[1]P
9GND29Rx3[2]N
10
Rx1[0]N30Rx3[2]P
ODD LVDS
SIGNAL
Rx1[3]P
11Rx1[0]P31GND
12Rx1[1]N32Rx3CLK-
13Rx1[1]P33Rx3CLK+
14Rx1[2]N34GND
15Rx1[2]P35Rx3[3]N
16GND36Rx3[3]P
17Rx1CLK-37Rx3[4]N
18Rx1CLK+38Rx3[4]P
19GND39GND
20Rx1[3]N40No Connection
Note) No Connection: This PINS are only used for SAMSUNG internal using.
ODD LVDS
SIGNAL
41No Connection
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 13
Global LCD Panel Exchange Center
tvklss{h[]WoqW\kUGuW]TWWYTzTXWWXXZw
XZVY_
4.1.2 Input Signal & Power Connector : FI-RE51S-HF (JAE/UJU)
PinDescriptionPinDescription
www.panelook.com
Samsung Secret
Samsung Secret
1Vdd(12V)26
2Vdd(12V)27Rx4[1]N
3Vdd(12V)28Rx4[1]P
4Vdd(12V)29Rx4[2]N
5Vdd(12V)30Rx4[2]P
6No Connection31GND
7GND32Rx4CLK-
8GND33Rx4CLK+
9GND34GND
10
11Rx2[0]P36Rx4[3]P
12Rx2[1]N37Rx4[4]N
13Rx2[1]P38Rx4[4]P
14Rx2[2]N39GND
15Rx2[2]P40No Connection
Rx2[0]N35Rx4[3]N
EVEN
LVDS
SIGNAL
Rx4[0]P
16GND41No Connection
17Rx2CLK-42No Connection
18Rx2CLK+43No Connection
19GND44No Connection
20Rx2[3]N45LVDS Option * Note(1)
21Rx2[3]P46No Connection
22Rx2[4]N47No Connection
23Rx2[4]P48No Connection
24GND49No Connection
25Rx4[0]N50No Connection
NOTE) No connection : This Pins are only used for SAMSUNG internal using
EVEN
LVDS
SIGNAL
51No Connection
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 14
Global LCD Panel Exchange Center
tvklss{h[]WoqW\kUGuW]TWWYTzTXWWXXZw
X[VY_
Note) Pin number starts from Right side
www.panelook.com
PCB
Samsung Secret
Samsung Secret
Pin No. 1 Pin No. 41
#1#41
#1
#41
Pin No. 1 Pin No. 51
#1
#1
#51
#51
Fig. Connector diagram
a. All GND pins should be connected together and also be connected to the LCD’s
metal chassis.
b. All power input pins should be connected together.
c. All NC pins should be separated from other signal or power.
Note(1) LVDS OPTION : If this PIN HIGH ( 3.3V ) ˧ Normal LVDS format
Under the display quality test conditions with normal operation state, these should
be no change which may affect practical display functions.
* HTOL/ LTOL : High/Low Temperature Operating Life
** THB : Temperature Humidity Bias
*** HTS/LTS : High/Low Temperature Storage
**** WHTS : Wet High Temperature Storage
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 24
Global LCD Panel Exchange Center
tvklss{h[]WoqW\kUGuW]TWWYTzTXWWXXZw
Y[VY_
8. PACKING
8.1 CARTON (Internal Package)
(1) Packing Form
Corrugated fiberboard box and corrugated cardboard as shock absorber
(2) Packing Method
Packing
-Pallet Box
www.panelook.com
Samsung Secret
Samsung Secret
Direction be able to open it
Cushion-Foam
LCD Module
Cushion-Foam
Pallet-Plastic
8.2 Packing Specification
ItemSpecificationRemark
LCD Packing
16ea / (Packing-
Pallet Box)
1. 180.8 kg / LCD (16ea)
2. 12 Kg / Cushion-pallet (2ea)
3. 8 Kg / Packing-Pallet Box (1ea)
4. Cushion-pallet Material : EPS
5. Packing-Pallet Box Material : DW4
Pallet1Box / Pallet1. Pallet weight = 8.8kg
Packing DirectionVertical
Total Pallet SizeH x V x height1270mm(H) x 1150mm(V) x 844mm(height)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 25
Global LCD Panel Exchange Center
tvklss{h[]WoqW\kUGuW]TWWYTzTXWWXXZw
Y\VY_
9. MARKING & OTHERS
A nameplate bearing followed by is affixed to a shipped product at the specified
location on each product.
(1) Part number : LTA460HJ05
(2) Revision: Three letters
(3) Lot number : X X X X XXX
(4) Nameplate Indication
www.panelook.com
XX X
Cell Position No. (In the Glass)
Glass No. (In the one Lot)
Lot No. (Glass)
Month
Year (Note1)
Product code
Line
Samsung Secret
Samsung Secret
T
C
LTA460HJ05
0925
[[[[
(5) Packing box attach
[[[[[[[[[[[[[
OWD793KM38
Week code : 09 25
week
year
40mm
Revision code
Lot number
80mm
100mm
Part number
[[[
49
Box serial number
165mm
(6) Others
1. After service part
Lamps cannot be replaced because of the narrow bezel structure.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 26
Global LCD Panel Exchange Center
tvklss{h[]WoqW\kUGuW]TWWYTzTXWWXXZw
Y]VY_
10. General Precautions
10.1 Handling
(a) When the Module is assembled, it should be attached to the system firmly
using all mounting holes. Be careful not to twist and bend the Module.
(b) Because the inverter use high voltage, it should be disconnected from power
before it is assembled or disassembled.
(c) Refrain from strong mechanical shock and / or any force to the Module.
In addition to damage, this may cause improper operation or damage to the Module
and LED back light.
(d) Note that polarizers are very fragile and could be damage easily.
Do not press or scratch the surface harder than a HB pencil lead.
www.panelook.com
Samsung Secret
Samsung Secret
(e) Wipe off water droplets or oil immediately. If you leave the droplets for a long
time, staining or discoloration may occur.
(f) If the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth.
(g) Desirable cleaners are water, IPA(Isopropyl Alcohol) or Hexane.
Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid
or Methyl chloride. It might permanent damage to the polarizer due to chemical
reaction.
(h) If the liquid crystal material leaks from the panel, it should be kept away
from the eyes or mouth . In case of contact with hands, legs or clothes, it must
be washed away with soap thoroughly.
(i) Protect the module from Electrostatic discharge. Otherwise the ASIC IC or
semiconductor would be damaged.
(j) Use finger-stalls with soft gloves in order to keep display clean during the
incoming inspection and assembly process.
(k) Do not disassemble the Module.
(l) Do not disassemble shield case of inverter & LVDS board
(m) Do not connect N.C pins. (Samsung internal use only)
(n) Protection film for polarizer on the Module should be slowly peeled off just before use
so that the electrostatic charge can be minimized. Must put on antistatic glove while
handling a module
(o) Pins of I/F connector should not be touched directly with bare hands.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 27
Global LCD Panel Exchange Center
tvklss{h[]WoqW\kUGuW]TWWYTzTXWWXXZw
Y^VY_
10.2 Storage
(a) Do not leave the Module in high temperature, and high humidity for a long time.
It is highly recommended to store the Module with temperature from 0 to 35
and relative humidity of less than 70%.
(b) Do not store the TFT-LCD Module in direct sunlight.
(c) The Module should be stored in a dark place. It is prohibited to apply sunlight or
fluorescent light in storing.
10.3 Operation
www.panelook.com
Samsung Secret
Samsung Secret
(a) Do not connect or disconnect the Module in the "Power On" condition.
(b) Power supply should always be turned on/off by the "Power on/off sequence"
(c) Module has high frequency circuits. Sufficient suppression to the electromagnetic
interference should be done by system manufacturers. Grounding and shielding methods
may be important to minimize the interference.
(d) The cable between the back light connector and its inverter power supply should
be connected directly with a minimized length. A longer cable between
the back light and the inverter may cause lower luminance of LED and
may require higher startup voltage(Vs).
10.4 Operation Condition Guide
(a) The LCD product should be operated under normal conditions.
(b) If the product will be used in extreme conditions such as high temperature,
humidity, display patterns or operation time etc.., It is strongly recommended
to contact SEC for Application engineering advice. Otherwise, its reliability and
function may not be guaranteed. Extreme conditions are commonly found at
Airports, Transit Stations, Banks, Stock market, and Controlling systems.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 28
Global LCD Panel Exchange Center
tvklss{h[]WoqW\kUGuW]TWWYTzTXWWXXZw
Y_VY_
10.5 Others
(a) Ultra-violet ray filter is necessary for outdoor operation.
(b) Avoid condensation of water. It may result in improper operation or disconnection
of electrode.
(c) Do not exceed the absolute maximum rating value. ( supply voltage variation,
input voltage variation, variation in part contents and environmental temperature,
and so on)
Otherwise the Module may be damaged.
(d) If the Module keeps displaying the same pattern for a long period of time,
the image may be "sticked" to the screen.
To avoid image sticking, it is recommended to use a screen saver.
www.panelook.com
Samsung Secret
Samsung Secret
(e) This Module has its circuitry PCB's on the rear side and should be handled
carefully in order not to be stressed.
(f) Please contact SEC in advance when you display the same pattern for a long time.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.