SAMSUNG LTA460HJ02 Specification

Page 1
Samsung Confidential
G/A
Samsung Confidential
Approval
Approval
Customer : Funai
SAMSUNG TFT--
SAMSUNG TFT
SAMSUNG TFT-LCD
MODEL
MODEL
MODEL : LTA460HJ02
The Information Described in this Specification is Preliminary and can be changed without prior notice
: LTA460HJ02
: LTA460HJ02
DATE : 15. Mar. 2010
Customer’’
Customer
SIGNATURE
Samsung Electronics Co . , LTD.
Samsung Confidential
Samsung Confidential
s Approval
s Approval
DATE
LCD Business
APPROVED BY
PREPARED BY
DATE
15.Mar.2010
DATE
15.Mar.2010
1/ 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 2
Samsung Confidential
Samsung Confidential
Contents
Revision History --------------------------------------------------------------------------------------------- (3) General Description --------------------------------------------------------------------------------------- (4) General Information --------------------------------------------------------------------------------------- (4)
1. Absolute Maximum Ratings -------------------------------------------------------------------------- (5)
2. Optical Characteristics --------------------------------------------------------------------------------- (6)
3. Electrical Characteristics ------------------------------------------------------------------------------- (9)
3.1 TFT LCD Module
3.2 Back Light Unit
3.3 Inverter Input & Specification
4. Input Terminal Pin Assignment --------------------------------------------------------------------- (12)
4.1 Input Signal & Power
4.2 Inverter Input Pin Configuration
4.3 Inverter Input Power Sequence
4.4 LVDS Interface
4.5 Input Signals, Basic Display Colors and Gray Scale of Each Color
5. Interface Timing ---------------------------------------------------------------------------------------- (18)
5.1 Timing Parameters (DE only mode)
5.2 Timing Diagrams of interface Signal (DE only mode)
5.3 Power ON/OFF Sequence
6. Outline Dimension -------------------------------------------------------------------------------------- (21)
7. Packing --------------------------------------------------------------------------------------------------- (23)
8. Reliability Test ------------------------------------------------------------------------------------------- (24)
9. Marking & Others --------------------------------------------------------------------------------------- (25)
10. General Precaution ----------------------------------------------------------------------------------- (26)
10.1 Handling
10.2 Storage
10.3 Operation
10.4 Operation Condition Guide
10.5 Others
Samsung Confidential
Samsung Confidential
2/ 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 3
Revision History
Samsung Confidential
Samsung Confidential
Date
Sep. 1,
2009
Nov. 18,
2009
Dec. 09,
2009
Jan. 11,
2010
Rev.
No
000 All First issued
001
002
003
Page Summary
General Information updated4 Optical Characteristics updated6 Electrical Characteristi cs updated9 Inverter Input Condition & Specification updated11 Packing updated23 Absolute Maximum Ratings – Max. Surface Temperature updated5 Inverter Input Condition & Specification updated11 Response time corrected (typ 8 → 6)
6
Test equipment setup corrected (between 40 min and 6 0min → after 60min from)
Note(3) corrected : Average of G-to-G TR , TF8 Vsync Frequency changed9 Timing Parameters changed (Vsync, Vertical Total)18
Mar. 15,
2010
#42 pin 1D dimming EN Æ No connection or GND13004
Samsung Confidential
Samsung Confidential
3/ 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 4
Samsung Confidential
General Description
Samsung Confidential
Description
LTA460HJ02 is a color active matrix liquid crystal display (LCD) that uses amorphous silicon
TFT(Thin Film Transistor) as switching components. This model is composed of a TFT LCD panel, a driver circuit and a back light unit. The resolution of a 46.0“ is 1920 x 1080 and this model can display up to 1.07 Billion colors with wide viewing angle of 89° or higher in all directions. This panel is intended to support applications to provide a excellent performance for Flat Panel Display such as Home-alone Multimedia TFT-LCD TV and High Definition TV
Features
RoHS compliance (Pb-free)High contrast ratio & aperture ratio with wide color gamutSPVA(Super Patterned Vertical Align) modeWide viewing angle (±178°)High speed response
FHD resolution (16:9)
( & Natural Motion (DFR: Double Frame Rate) )
Low Power consumptionDirect Type 12 CCFLs(Cold Cathode Fluorescent Lamp)1-D Dimming, 6 Block (1 Block = 2 CCFL)DE(Data Enable) mode4ch LVDS (Low Voltage Differential Signaling) interface (4pixel/clock)
General Information
Module Size
1083.0(H
Haze 4.5%, Hard Coating 3HSurface Treatment
RGB vertical stripePixel Arrangement
TYP
55.1 (D
Normally BlackDisplay Mode
450 (Typ.)Luminance of White
) x 627.0(V
)
MAX
TYP
UnitSpecificationItems
)
mm
g12.3kg (Max)Weight mm0.53025(H) x 0.53025(W)Pixel Pitch mm1018.08(H) x 572.67(V)Active Display Area
colors8 bit + FRC – 1.07 BillionDisplay Colors
pixel1,920 x 1,080Number of Pixels
2
cd/m
Note
±1.0mm
Samsung Confidential
Samsung Confidential
4/ 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 5
Samsung Confidential
Samsung Confidential
1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable damage to the device.
NoteUnitMax.Min.SymbolItem
Power Supply Voltage
Storage temperature
Operating temperature
Surface temperature
Shock (non - operating)
Vibration (non - operating)
S
NOP
DD
STG
OPR
SUR
X,Y 40
NOP
-
Note (1) Ta= 25 ± 2 °C
(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta ≤ 39 °C) b. Relative Humidity is 90% or less. (Ta >39 °C) c. No condensation
(3) Although abnormal visual problems can be occurred in T
SUR
is not damaged in this range. (4) 11ms, sine wave, one time for ±X, ±Y, ±Z axis (5) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis
V16.5GND-0.5V
V5-Max. LumDimming Control 60-20T 500T 650T
℃
℃
℃
30-Z
range, the polarizer
(1)
(2)
(3)
(4)G
(5)G1.5-V
Fig. Temperature and Relative humidity range
Samsung Confidential
Samsung Confidential
5/ 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 6
Samsung Confidential
2. Optical Characteristics
Samsung Confidential
The optical characteristics should be measured in a dark room or equivalent. Measuring equipment : TOPCON RD-80S, TOPCON SR-3, ELDIM EZ-Contrast
Contrast Ratio
(Center of screen)
Response
Time
Luminance of White
(Center of screen)
Color
Green
Chromaticity
(CIE 1931)
White
Red
Blue
(Ta = 25 ± 2°C, VDD=12V, fv= 120Hz, f
L
Rx
Normal
qL,R =0
0.642
0.330Ry
qU,D =0
0.288Gx
Viewing
Angle
TYP.
-0.03
0.610Gy
0.147Bx
0.057By
0.280Wx
0.290Wy
= 297.0MHz, Dimming = Max)
DCLK
-5,0004,000C/R
-6-TgG-to-G
-450360Y
msec
cd/m
(1) SR-3
RD-80S
2
TYP.
+0.03
NoteUnitMax.Typ.Min.ConditionSymbolItem
1D off
(3)
(4)
SR-3
(5),(6)
SR-3
Hor.
Viewing
Angle
Ver.
White Brightness
Uniformity (9 Points)
- Test Equipment Setup The measurement should be executed in a stable, windless and dark room
after 60min from lighting the back light at the given temperature for stabilization of the back light. This should be measured in the center of screen.
Environment condition : Ta = 25 ± 2 °C
Samsung Confidential
Samsung Confidential
%-72--Color Gamut
K-10,000--Color Temperature
q
L
R
U
D
uni
C/R≥10
-8975
-8975q Degree
-8975q
-8975q
%25--B
(5)
SR-3
(6)
EZ-Contrast
(2)
SR-3
6/ 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 7
Samsung Confidential
Samsung Confidential
Field Photo detector
2°SR-3 1°RD-80S
TFT - LCD Module
- Definition of test point
320 960 1600
Photo detector
Field
SR-3 : 50㎝ RD-80S : 50㎝
LCD Panel
The center of the screen
180
540
900
⑨
⑥
⑧
⑤④
Note (1) Definition of Contrast Ratio (C/R)
: Ratio of gray max (Gmax) & gray min (Gmin) at the center point ⑤ of the panel
G
CR
/
max
=
G
min
Gmax : Luminance with all pixels white Gmin : Luminance with all pixels black
⑦
①②③
Active Area
Test Point
Samsung Confidential
Samsung Confidential
7/ 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 8
Samsung Confidential
Samsung Confidential
Note (2) Definition of 9 points brightness uniformity (Test pattern : Full White )
Buni
BB
=∗
(max min)
100
B
−
max
Bmax : Maximum brightness Bmin : Minimum brightness
Note (3) Definition of Response time : Average of G-to-G TR, T
Display data
Optical Instruments
Response
100%
90%
10%
0%
Black (data off)
T
R
White (data on)
F
Black (data off)
T
F
TIME
Note (4) Definition of Luminance of White : Luminance of white at center point ⑤ Note (5) Definition of Color Chromaticity (CIE 1931)
Color coordinate of Red, Green, Blue & White at center point ⑤
Note (6) Definition of Viewing Angle
: Viewing angle range (C/R ≥10)
Samsung Confidential
Samsung Confidential
8/ 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 9
3. Electrical Characteristics
3.1 TFT LCD Module
The connector for display data & timing signal should be connected.
Samsung Confidential
Samsung Confidential
Ta = 25°C ± 2 °C
NoteUnitMax.Typ.Min.SymbolItem
Voltage of Power Supply
Current of
(a) Black
Power
DD
I
DD
Supply
Vsync Frequency Hsync Frequency Main Frequency Rush Current
V
H
DCLK
RUSH
Note (1) The ripple voltage should be controlled under 10% of VDD.
(2) f
=120Hz, f
V
= 297.0MHz, VDD= 12.0V, DC Current.
DCLK
(3) Power dissipation check pattern (LCD Module only)
a) Black Pattern b) White Pattern c) Sub V-Stripe
(1)V13.212.010.8V
-800-
-710-(b) White
mA mA
(2),(3)
mA14001100-(c) Sub V-Stripe
Hz121.95120.090.0f
kHz140135120f
MHz305297.0260f
(4)A6--I
(4) Measurement Conditions
100%
90%
10% GND
Rush Current I
Samsung Confidential
Samsung Confidential
T
RUSH
can be measured when T
RUSH
=470㎲
. is 470㎲.
RUSH
V
DD
9/ 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 10
Samsung Confidential
Samsung Confidential
3.2 Back Light Unit
The back light unit contains 12 direct-lighting type CCFLs ( Cold Cathode Fluorescent Lamp )
Ta=25 ± 2°C
Socket
HOT 1
HOT 2
LCD
Inverter
Module
HOT 11
HOT 12
NoteUnitMax.Typ.Min.SymbolItem
(1)Hour--50,000HrOperating Life Time
Note (1) It is defined as the time to take until the brightness reduces to 50% of its original
value.
[Operating condition : Ta = 25±2℃, For single lamp only. ]
Samsung Confidential
Samsung Confidential
10 / 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 11
3.3 Inverter Input Condition & Specification
ConditionsSymbolItems
Specifications
Samsung Confidential
Samsung Confidential
Ta=25 ± 2°C
NoteUnit
Max.Typ.Min.
Input Voltage
Input Current
Lamp Current
Frequency
Backlight
On/Off
PWM
Voltage
PWM Frequency
IN
I
IN
O,MAX
LAMP
V
PWM
PWM
Vin = 24.0V
EX-PWM = 95%
(2)V262422-V
A7.48--
(1)
mArms15.414.714.0EX-PWM = 95%I
kHz4543.542Vin = 24.0 VF
-
5.25-2.4Vin = 24.0 VON (2)V
0.8-0Vin = 24.0 VOFF
3.6-3.0Max (2)V
0.4-0.0Min
(4)Hz151.5150148.5Vin=24.0 VF
95-20Vin=24.0 V
±3%, (3)%DutyPWM Duty
Note) Power Consumption is measured at 450 [cd/m2] of luminance which is the typical
luminance value. Lamp Current is measured at the point before Lamp.
(1) Max Value of the Power Consumption is measured after 60 min warm-up. (2) The ripple voltage should be controlled under 10% of Input Signal (3) Duty = On/(On+Off) * 100
(4) External PWM Signal
Jitter : Max. 200ns
90%
10%
Tr : Max 60us
90%
10%
Tf : MAX 60us
* Initial turn-on time : From 0sec to 60min after turn-on
Samsung Confidential
Samsung Confidential
11 / 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 12
Samsung Confidential
Samsung Confidential
4. Input Terminal Pin Assignment
4.1.1 Input Signal & Power Connector : FI-RE41S-HF (JAE/UJU)
DescriptionPinDescriptionPin
10
21Vdd(12V)1
24Vdd(12V)4
ODD
LVDS
SIGNAL
31Rx1[0]P11
Rx1[3]P
Rx1[4]N22Vdd(12 V)2
Rx1[4]P23Vdd(12V)3
GND
Rx3[0]N25Vdd(12V)5
Rx3[0]P26No Connection6
Rx3[1]N27GND7
Rx3[1]P28GND8
Rx3[2]N29GND9
Rx3[2]P30Rx1[0]N
GND
Rx3CLK-32Rx1[1]N12
Rx3CLK+33Rx1[1]P13
ODD
LVDS
SIGNAL
Note) No Connection: This PINS are only used for SAMSUNG internal using.
Samsung Confidential
Samsung Confidential
34Rx1[2]N14
GND
Rx3[3]N35Rx1[2]P15
Rx3[3]P36GND16
Rx3[4]N37Rx1CLK-17
Rx3[4]P38Rx1CLK+18
GND39GND19 No Connection40Rx1[3]N20 No Connection41
12 / 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 13
Samsung Confidential
Samsung Confidential
4.1.2 Input Signal & Power Connector : FI-RE51S-HF (JAE/UJU)
DescriptionPinDescriptionPin
10
Rx2[0]N Rx2[0]P Rx2[1]N Rx2[1]P Rx2[2]N Rx2[2]P
26Vdd(12V)1 27Vdd(12V)2 28Vdd(12V)3 29Vdd(12V)4 30Vdd(12V)5 31No Connection6 32GND7 33GND8 34GND9 35 3611 3712 3813
EVEN LVDS
SIGNAL
Rx4[0]P
Rx4[1]N
Rx4[1]P
Rx4[2]N
Rx4[2]P
GND
Rx4CLK-
Rx4CLK+
GND
Rx4[3]N
Rx4[3]P
Rx4[4]N
Rx4[4]P
GND3914
No Connection4015
GND
EVEN
LVDS
SIGNAL
Note) No Connection: This PINS are only used for SAMSUNG internal using.
Samsung Confidential
Samsung Confidential
Rx2CLK-
Rx2CLK+
GND Rx2[3]N Rx2[3]P Rx2[4]N Rx2[4]P
GND Rx4[0]N
No Connection4116
No Connection or GND4217
No Connection4318 No Connection4419
LVDS Option * Note(1)4520
No Connection4621 No Connection4722 No Connection4823 No Connection4924
PC MODE EN * Note(2)5025
No Connection51
13 / 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 14
Note) Pin number starts from Left side
PCB
Samsung Confidential
Samsung Confidential
▼
CN1
Pin No. 1 Pin No. 41
#1
#1 #41
#41
▼
Pin No. 1 Pin No. 51
#1 #51
#1 #51
CN2
Fig. Connector diagram
a. All power GND pins should be connected together and also be connected
to the LCD’s metal chassis. b. All power input pins should be connected together. c. All NC pin should be separated from other signal or power.
Note (1) LVDS OPTION : If this PIN HIGH ( 3.3V ) → Normal LVDS format
LOW ( GND ) → JEIDA LVDS format
SEQUENCE : On = VDD(T1) → LVDS Option → Interface Signal(T2)
OFF = Interface Signal(T3) → LVDS Option → VDD
Vin
LVDS
Option
LVDS Signal
Note (2) PC MODE EN : If this PIN HIGH ( 3.3V ) → PC MODE On
Samsung Confidential
Samsung Confidential
T2
LVDS Option Sequence
LOW ( GND ) or N.C → PC MODE Off
T3
14 / 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 15
4.2. Inverter Input Pin Configuration
Pin Configuration (FUNCTION)
Pin No.
Samsung Confidential
Samsung Confidential
Connector : JST, S14B-PHA-SM-TB(LF)
SlaveMaster 24 V1 24 V2 24 V3 24 V4 24 V5
GND6 GND7 GND8 GND9 GND10
Error Out 11
Backlight On /Off
Dimming Control
External PWM
[ON:2.4 – 5.25 V, OFF: 0 - 0.8 V]12
[0V:Min, 3.3V:Max] *Note(1)13
[20~100%] *Note(1)14
Note(1) If use Dimming Control, Pin 14 Must be N.C
If use External PWM, Pin 13 Must be N.C
24 V 24 V 24 V 24 V
24 V GND GND GND GND GND
No Connection No Connection No Connection No Connection
4.3. Inverter Input Power Sequence
0.9 Vin
Vin (24V)
Dimming Control ( 0 ~ 3.3 V )
Backlight On/Off
0.1 Vin
0.5sec [Min]
Note) SEQUENCE : ON = Vin(24V) > Dimming Control ≥ Backlight On/Off
OFF = Backlight On/Off ≥ Dimming Control > Vin(24V)
Samsung Confidential
Samsung Confidential
0.02sec [Min]
0sec [Min]
2.4V(On level)
0.8V(Off level)
0sec [Min]
0.9 Vin
0.5sec [Min]
15 / 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 16
4.4 LVDS Interface
- LVDS Receiver : Tcon (merged)
- Data Format (JEIDA & Normal)
Samsung Confidential
Samsung Confidential
TxOUT/RxIN0
TxOUT/RxIN1
TxOUT/RxIN2
TxOUT/RxIN3
TxOUT/RxIN4
JEIDA -DATA
R4 R5 R6 R7 R8 R9 G4 G5 G6 G7 G8 G9 B4 B5 B6 B7 B8
B9 HSYNC VSYNC
DEN
R2
R3
G2
G3
B2
B3
RESERVED
R0
R1
G0
G1
B0
B1
RESERVED
Normal -DATALVDS pin
R0TxIN/RxOUT0 R1TxIN/RxOUT1 R2TxIN/RxOUT2 R3TxIN/RxOUT3 R4TxIN/RxOUT4 R5TxIN/RxOUT6 G0TxIN/RxOUT7 G1TxIN/RxOUT8 G2TxIN/RxOUT9 G3TxIN/RxOUT12 G4TxIN/RxOUT13 G5TxIN/RxOUT14 B0TxIN/RxOUT15 B1TxIN/RxOUT18 B2TxIN/RxOUT19 B3TxIN/RxOUT20 B4TxIN/RxOUT21
B5TxIN/RxOUT22 HSYNCTxIN/RxOUT24 VSYNCTxIN/RxOUT25
DENTxIN/RxOUT26
R6TxIN/RxOUT27
R7TxIN/RxOUT5 G6TxIN/RxOUT10 G7TxIN/RxOUT11 B6TxIN/RxOUT16 B7TxIN/RxOUT17
RESERVEDTxIN/RxOUT23
R8TxIN/RxOUT28 R9TxIN/RxOUT29 G8TxIN/RxOUT30 G9TxIN/RxOUT31 B8TxIN/RxOUT32 B9TxIN/RxOUT33
RESERVEDTxIN/RxOUT34
Samsung Confidential
Samsung Confidential
16 / 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 17
Samsung Confidential
Samsung Confidential
4.5 Input Signals, Basic Display Colors and Gray Scale of Each Color
COLOR
BASIC
COLOR
GRAY
SCALE
OF
RED
DISPLAY
(8bit)
DARK
↑
↓
LIGHT
DATA SIGNAL
BLUEGREENRED
G8
R8
R9
0
0
0
00BLUE
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
::::::::::::::
G9
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0
000000000000000000BLACK
0
0
0
0
:
:
:
:
0
0
0
0
0
0
B7B6B5B4B3B2B1B0G7G6G5G4G3G2G1G0R7R6R5R4R3R2R1R0
:::::::::::::::::::::::: ::::::::::
GRAY SCALE LEVEL
B8
B9
0
0 1 0 1 0 1 0 1 0 0 0
:
: 0 0
0
-000000000000000000000000BLACK
1
-1111111100000000000000
0
-000000001111111100000000GREEN
1
-111111111111111100000000CYAN
0
-000000000000000011111111RED
1
-111111110000000011111111MAGENTA
0
-000000001111111111111111YELLOW
1
-111111111111111111111111WHITE
0
R0000000
0
R1000000000000000000000001
0
R2000000000000000000000010
:
R3~
R1020
:
0
R1021000000000000000011111101
0
R1022000000000000000011111110
0
R1023000000000000000011111111RED
GRAY
SCALE
OF
GREEN
GRAY
SCALE
OF BLUE
DARK
↑
↓
LIGHT
DARK
↑
↓
LIGHT
000BLACK
Note) Definition of Gray :
Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level)
Input Signal : 0 = Low level voltage, 1 = High level voltage
Samsung Confidential
Samsung Confidential
0
0
0
0000000000BLACK
0
0
0
0
:
:
:
::::::
:
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
0
0
0
0
0
0
0
0 0 0
::::::::::::::::::::::::
:
::::::::::::::::::
: 0 0 0 0 0 0
:
::::::::::::::::::::::::
:
::::::::::::::::::::::::
1 1 1
G000000000000000
0
G1000000000000000100000000
0
G2000000000000001000000000
:
G3~
G1020
:
0
G1021000000001111110100000000
0
G1022000000001111111000000000
0
G1023000000001111111100000000GREEN
0
B0000000000000000000000
0
B1000000010000000000000000
0
B2000000100000000000000000
:
B3~
B1020
:
1
B1021111111010000000000000000
1
B1022111111100000000000000000
1
B1023111111110000000000000000BLUE
17 / 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 18
5. Interface Timing
5.1 Timing Parameters ( DE mode )
Samsung Confidential
Samsung Confidential
NOTEUnitMAX.TYP.MIN.SYMBOLITEMSIGNAL
Clock
Hsync
Vsync
Vertical
Frequency
Active Display Period
C
H
V
VD
Display Term
Vertical Total
Active Display Period
Horizontal
V
HD
Display Term
Horizontal Total
H
Note) This product is DE mode. The Hsync & Vsync signal must be inputted
-MHz305.0297.0260.01/T
-KHz140.0135.0120.0F
-Hz121.95120.090.0F
-Lines-1080-T
-Lines150011251107T
-Clocks-1920-T
-clocks234822002092T
(1) Test Point : TTL control signal and CLK at LVDS Tx input terminal in system (2) Internal VDD = 3.3V (3) Spread spectrum
- Modulation rate (max) : ± 1.5 %
- Modulation Frequency : under 300KHz
Samsung Confidential
Samsung Confidential
18 / 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 19
5.2 Timing diagrams of interface signal ( DE mode )
TV
Samsung Confidential
Samsung Confidential
DE
DE
DCLK
DATA
SIGNALS
TVD
TVB
TH
THD
TC
Samsung Confidential
Samsung Confidential
DCLK
DISPLAY
DATA
DE
TC
TCH
TDS TDH
TES
TCL
0.5 V
0.5 V
CC
0.5 V
CC
CC
19 / 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 20
Samsung Confidential
Samsung Confidential
5.3 Power ON/OFF Sequence
To prevent a latch-up or DC operation of the LCD Module, the power on/off
sequence should be as the diagram below.
1msec<T1≤10msec
0<T2≤50msec 0<T3≤50msec 1000msec≤T4
1000msec≤T5
(Recommend Value)
100msec≤T6
(Recommend Value)
50% 50%
T1 : VDDrising time from 10% to 90% T2 : The time from V T3 : The time from valid data off to V T4 : V
off time for Windows restart
DD
to valid data at power ON.
DD
off at power Off.
DD
T5 : The time from valid data to B/L enable at power ON. T6 : The time from valid data off to B/L disable at power Off.
The supply voltage of the external system for the Module input should be the same
as the definition of V
DD
.
Apply the lamp voltage within the LCD operation range. When the back light turns on
before the LCD operation or the LCD turns off before the back light turns off, the display may momentarily show abnormal screen.
In case of V
= off level,
DD
please keep the level of input signals low or keep a high impedance.
T4 should be measured after the Module has been fully discharged between power off
and on period.
Interface signal should not be kept at high impedance when the power is on.In Case T5 is less than 1000msec and T6 is less than 100msec,
Garbage Display can be seen. (It is not related to electrical function issue, Just for recommendation to prevent Garbage Display )
Samsung Confidential
Samsung Confidential
20 / 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 21
6. Outline Dimension- Front
Samsung Confidential
Samsung Confidential
Samsung Confidential
Samsung Confidential
21 / 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 22
6. Outline Dimension- Rear
Samsung Confidential
Samsung Confidential
Samsung Confidential
Samsung Confidential
22 / 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 23
7. PACKING
7.1 CARTON (Internal Package)
(1) Packing Form
Corrugated fiberboard box and corrugated cardboard as shock absorber
(2) Packing Method
Packing
-Pallet Box
Cushion-Foam
LCD Module
Samsung Confidential
Samsung Confidential
Direction be able to open it
Cushion-Foam
Pallet-Plastic
7.2 Packing Specification
LCD Packing
Total Pallet
Weight
10ea / (Packing-
Pallet Box)
VerticalPacking Direction
149.8 kg
RemarkSpecificationItem
1. 12.3 kg / LCD (10ea)
2. 10 Kg / Cushion-pallet (2ea)
3. 8 Kg / Packing-Pallet Box (1ea)
4. Cushion-pallet Material : EPS
5. Packing-Pallet Box Material : DW4
1. Pallet weight = 8.8kg1Box / PalletPallet
1270mm(H) x 1150mm(V) x 844mm(height)H x V x heightTotal Pallet Size Pallet(8.8kg) + Module (12.3kg*10) + Cushion
(up + bottom =10kg) + Pallet-BOX(8kg)
Samsung Confidential
Samsung Confidential
23 / 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 24
8. Reliability Test
Samsung Confidential
Samsung Confidential
QuantityTest conditionItem
Temperature
Step Stress
ESD(operation)
Input Con.ESD
(Non-operation)
POWER ON/OFF
contact : ±8 kV ,150㎊/330Ω,200Point,1 time/Point
non-contact : ±15 kV,150㎊/330Ω,200Point,1 time/Point
4EA-20 ∼ 60℃, 10Cycle determination
4EA50℃, 500hr determinationHTOL 4EA0℃, 500hr determinationLTOL
4EA70℃, 500hr determinationHTS 4EA-30℃, 500hr determinationLTS 4EA40℃ / 95%RH, 500hr determinationTHB
4EA60℃ / 75%RH, 500hr determinationWHTS 4EA-20 ℃ ~ 60 ℃, 200cycle determinationThermal Shock
3EA
3EAcontact : ±2kV,150㎊/330Ω,Input Con.Pin,3 times/Pin
4EA30sec (on) / 30sec(off) : 12,000 times
Shock
PALLET
Vibration
PALLET Drop
Half Sine, 50G, 11msec, ±X,Y 1time/axis
Half Sine, 50G, 11msec, ±Z 1time/axis
1.05Grms 5~200Hz 1hr
4 edge 1face(bottom) 20 cm
1PALLET(10EA)
1PALLET(10EA)
[ Result Evaluation Criteria]
Under the display quality test conditions with normal operation state, these should be no change which may affect practical display functions.
* HTOL/ LTOL : High/Low Temperature Operating Life ** THB : Temperature Humidity Bias *** HTS/LTS : High/Low Temperature Storage **** WHTS : Wet High Temperature Storage
3EA10~300Hz/1.5G/10minSR, XYZ, 30min/axis Vibration
3EA
Samsung Confidential
Samsung Confidential
24 / 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 25
Samsung Confidential
Samsung Confidential
9. MARKING & OTHERS
A nameplate bearing followed by is affixed to a shipped product at the specified location on each product.
(1) Part number : LTA460HJ02 (2) Revision: Three letters (3) Lot number : X X X X XXX XX X
Cell Position No. (In the Glass) Glass No. (In the one Lot) Lot No. (Glass) Month Year (Note1) Product code Line
(4) Nameplate Indication
T
C
LTA460HJ02
0942
XXXX
(5) Packing box attach
XXXXXXXXXX XXX
LTA460HJ02
80mm
XXX
10
Week code : 09 42
week year
40mm
Revision code Lot number
Part number
100mm
Box serial number
(6) Others
1. After service part Lamps cannot be replaced because of the narrow bezel structure.
Samsung Confidential
Samsung Confidential
165mm
25 / 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 26
Samsung Confidential
Samsung Confidential
10. General Precautions
10.1 Handling
(a) When the Module is assembled, it should be attached to the system firmly
using all mounting holes. Be careful not to twist and bend the Module.
(b) Because the inverter use high voltage, it should be disconnected from power
before it is assembled or disassembled.
(c) Refrain from strong mechanica l shock and / or any force to the Module.
In addition to damage, this may cause improper operation or damage to the Module and CCFT back light.
(d) Note that polarizers are very fragile and could be damage easily.
Do not press or scratch the surface harder than a HB pencil lead.
(e) Wipe off water droplets or oil immediately. If you leave the droplets for a long
time, staining or discoloration may occur. (f) If the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth. (g) Desirable cleaners are water, IPA(Isopropyl Alcohol) or Hexane.
Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid
or Methyl chloride. It might permanent damage to the polarizer due to chemical
reaction. (h) If the liquid crystal material leaks from the panel, it should be kept away
from the eyes or mouth . In case of contact with hands, legs or clothes, it must
be washed away with soap thoroughly. (i) Protect the module from Electrostatic discharge. Otherwise the ASIC IC or
semiconductor would be damaged.
(j) Use finger-stalls with soft gloves in order to keep display clean during the
incoming inspection and assembly process. (k) Do not disassemble the Module. (l) Do not disassemble shield case of inverter & LVDS board (m) Do not connect N.C pins. (Samsung internal use only) (n) Protection film for polarizer on the Module should be slowly peeled off just before use
so that the electrostatic charge can be minimized. Must put on antistatic glove while handling a module
(o) Pins of I/F connector should not be touched directly with bare hands.
Samsung Confidential
Samsung Confidential
26 / 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 27
Samsung Confidential
Samsung Confidential
10.2 Storage
(a) Do not leave the Module in high temperature, and high humidity for a long time.
It is highly recommended to store the Module with temperature from 0 to 35℃
and relative humidity of less than 70%. (b) Do not store the TFT- L CD Module in direct sunlight. (c) The Module should be stored in a dark place. It is prohibited to apply sunlight or
fluorescent light in storing.
10.3 Operation
(a) Do not connect or disconnect the Module in the "Power On" condition. (b) Power supply should always be turned on/off by the "Power on/off sequence" (c) Module has high frequency circuits. Sufficient suppression to the electromagnetic
interference should be done by system manufacturers. Grounding and shielding methods may be important to minimize the interference.
(d) The cable between the back light connector and its inverter power supply should
be connected directly with a minimized length. A longer cable between the back light and the inverter may cause lower luminance of lamp(CCFT) and may require higher startup voltage(Vs).
10.4 Operation Condition Guide
(a) The LCD product should be operated under normal conditions.
Normal condition is defined as below;
- Temperature : 20±15℃
- Humidity : 55±20%
- Display pattern : continually changing pattern (Not stationary )
(b) If the product will be used in extreme conditions such as high temperature,
humidity, display patterns or operation time etc.., It is strongly recommended to contact SEC for Application engineering advice. Other wise, its reliability and function may not be guaranteed. Extreme conditions are commonly found at Airports, Transit Stations, Banks, Stock market, and Controlling systems.
Samsung Confidential
Samsung Confidential
27 / 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Page 28
Samsung Confidential
Samsung Confidential
10.5 Others
(a) Ultra-violet ray filter is necessary for outdoor operation. (b) Avoid condensation of water. It may result in improper operation or disconnection
of electrode.
(c) Do not exceed the absolute maximum rating value. ( supply voltage variation,
input voltage variation, variation in part contents and environmental temperature, and so on) Otherwise the Module may be damaged.
(d) If the Module keeps displaying the same pattern for a long period of time,
the image may be "sticked" to the screen. To avoid image sticking, it is recommended to use a screen saver.
(e) This Module has its circuitry PCB's on the rear side and should be handled
carefully in order not to be stressed.
(f) Please contact SEC in advance when you display the same pattern for a long time.
Samsung Confidential
Samsung Confidential
28 / 28Page06-004-S-100315Doc. NoLTA460HJ02MODEL
Loading...