Page 1
Global LCD Panel Exchange Center
X VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
Customer : DATE : 22.Nov.2005
www.panelook.com
Product Information
Product Information
SAMSUNG TFT--
SAMSUNG TFT
SAMSUNG TFT-LCD
MODEL
MODEL
MODEL : LTA400HS-L01
Any Modification of Specification is not allowed without SEC's Permission.
NOTE :
Customer’’
Customer
LCD
LCD
: LTA400HS--
: LTA400HS
s Approval
s Approval
L01
L01
hwwyv}hlkGi
DATE
22.Nov.2005
zpnuh{|yl
DATE
wylwhylkGi
Jeong-Geun Han
DATE
22.Nov.2005
LCD Application Engineering 3, TCS Team
Samsung Electronics Co . , LTD.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 2
Global LCD Panel Exchange Center
Y VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
www.panelook.com
Contents
Revision History -------------------------------------------------------------------------------------------- (3)
General Description --------------------------------------------------------------------------------------- (4)
General Information --------------------------------------------------------------------------------------- (4)
1. Absolute Maximum Ratings -------------------------------------------------------------------------- (5)
2. Optical Characteristics --------------------------------------------------------------------------------- (7)
3. Electrical Characteristics ----------------------------------------------------------------------------- (10)
3.1 TFT LCD Module
3.2 Back Light Unit
3.3 Inverter Input & Specification
4. Block Diagram ------------------------------------------------------------------------------------------- (13)
5. Input Terminal Pin Assignment --------------------------------------------------------------------- (14)
5.1 Input Signal & Power
5.2 Inverter Input Pin Configuration
5.3 Inverter Input Power Sequence
5.4 LVDS Interface
5.5 Input Signals, Basic Display Colors and Gray Scale of Each Color
6. Interface Timing ---------------------------------------------------------------------------------------- (19)
6.1 Timing Parameters (DE only mode)
6.2 Timing Diagrams of interface Signal (DE only mode)
6.3 Power ON/OFF Sequence
7. Outline Dimension -------------------------------------------------------------------------------------- (22)
8. Packing --------------------------------------------------------------------------------------------------- (24)
9. Marking & Others --------------------------------------------------------------------------------------- (25)
10. Inspection Criteria ------------------------------------------------------------------------------------- (26)
11. General Precaution ----------------------------------------------------------------------------------- (27)
11.1 Handling
11.2 Storage
11.3 Operation
11.4 Operation Condition Guide
11.5 Others
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 3
Global LCD Panel Exchange Center
Z VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
* Revision History
www.panelook.com
Date
Nov
22,
2005
Rev.
No
SummaryPage
First issuedall000
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 4
Global LCD Panel Exchange Center
[ VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
General Description
Description
LTA400HS-L01 is a color active matrix liquid crystal display (LCD) that uses amorphous
silicon TFT(Thin Film Transistor) as switching components. This model is composed of a
TFT LCD panel, a driver circuit and a back light unit. The resolution of a 40.0“ is
1920 x 1080 and this model can display up to 16.7 million colors with wide viewing angle
of 89¶ or higher in all directions. This panel is intended to support applications to provide a
excellent performance for Flat Panel Display such as Home-alone Multimedia TFT-LCD
TV, Display terminals for AV application products, and High Definition TV (HDTV).
Features
RoHS compliance (Pb-free)
High contrast ratio, high aperture ratio, fast response time
SPVA(Super Patterned Vertical Align) mode
Wide viewing angle (·178¶)
High speed response
Wide UXGA (1920 x 1080 pixels) resolution (16:9)
Low Power consumption
Direct Type 22 CCFTs(Cold Cathode Fluorescent Tube)
DE(Data Enable) mode
LVDS (Low Voltage Differential Signaling) interface (2pixel/clock)
www.panelook.com
General Information
Module Size
952.0(H
Haze 44% , Hard-coating (3H)Surface Treatment
RGB vertical stripePixel Arrangement
TYP
54.5(D
Normally BlackDisplay Mode
) x 551.0(V
)
MAX
TYP
UnitSpecificationItems
)
mm
g13,000(Max.)Weight
mm0.46125(H) x 0.15375(W)*3Pixel Pitch
mm885.6(H) x 498.15(V)Active Display Area
colors8 bit - 16.7MDisplay Colors
pixel1920 x 1080Number of Pixels
cd/༇500 (Typ.)Luminance of White
Note
·1.0mm
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 5
Global LCD Panel Exchange Center
\ VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.
www.panelook.com
NoteUnitMax.Min.SymbolItem
Power Supply Voltage
Storage temperature
Glass surface
Center
DD
STG
OPR
temperature
(Operation)
T. Uniformity
Shock ( non - operating )
Vibration ( non - operating )
Note (1) Ta= 25 · 2 ¶C
(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta ˺ 39 ¶C)
b. Maximum wet-bulb temperature at 39 ¶C or less. (Ta ˺ 39 ¶C)
c. No condensation
(3) 11ms, sine wave, one time for ·X, ·Y, ·Z axis
(4) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis
T
nop
nop
60-20T
500T
10-
50
(1)V5.5GND-0.5V
(2)
(2),(5)
(3)G-S
(4)G1.5-V
Fig. Temperature and Relative humidity range
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 6
Global LCD Panel Exchange Center
] VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
(5) Definition of test point
www.panelook.com
5mm
5mm
12
5
LCD Module (Active)
3
T should be less than 10
T
: Temperature of the center of the glass surface (Test point 5)
OPR
(ƸT = | T
OPR–TMAX
T1~ T4 : Temperature of each edge of the glass surface
: The highest temperature of the glass surface
T
MAX
4
| )
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 7
Global LCD Panel Exchange Center
^ VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
2. Optical Characteristics
The optical characteristics should be measured in a dark room or equivalent.
Measuring equipment :
TOPCON BM-7,SPECTRORADIOMETER SR-3
www.panelook.com
Contrast Ratio
(Center of screen)
Response
Time
Luminance of White
(Center of screen)
Color
Chromaticity
(CIE 1931)
Rising
Falling
Red
Green
Blue
White
(Ta = 25 · 2¶C, VDD=5V, fv= 60Hz, f
L
Rx
Normal
TL,R=0
TU,D=0
Viewing
Angle
TYP.
-0.03
0.648
0.331 Ry
0.281 Gx
0.598Gy
0.144 Bx
0.062By
0.280Wx
0.290Wy
=74.25MHz, IL= 6.0mArms)
DCLK
NoteUnitMax.Typ.Min.ConditionSymbolItem
-1000700C/R
1310-Tr
76-Tf
-500400Y
TYP.
+0.03
Msec
cd/m
%-72--Color Gamut
2
(3)
SR-3
(5)
BM-7
(6)
SR-3
(7),(8)
SR-3
(7)
SR-3
Hor.
Viewing
Angle
Ver.
Brightness Uniformity
(9 Points)
T
L
R
U
D
uni
C/R˻10
-8975
-8975T
Degree
-8975T
-8975T
Note (1) Test Equipment Setup
The measurement should be executed in a stable, windless and dark room between
40min and 60min after lighting the back light at the given temperature for stabilization
of the back light. This should be measured in the center of screen.
Single lamp current : 6.0mA
Environment condition : Ta = 25 · 2 ¶C
K-10000-TColor Temperature
%25--B
(7)
SR-3
(8)
SR-3
(4)
SR-3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 8
Global LCD Panel Exchange Center
_ VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
ྙྚྛ
ྞ
ྡ
ྠ
ྜྷ ྜ
ྟ
www.panelook.com
Field Photo detector
1°SR-3
2°BM-7
TFT - LCD Module
Note (2) Definition of test point
320 960 1600
Photo detector
Field
SR-3 : 50㎝
BM-7 : 50㎝
LCD Panel
The center of the screen
180
540
900
Note (3) Definition of Contrast Ratio (C/R)
: Ratio of gray max (Gmax) & gray min (Gmin) at the center point 㽶 of the panel
C
/
R
G
max
G
min
Gmax : Luminance with all pixels white
Gmin : Luminance with all pixels black
Active Area
Test Point
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 9
Global LCD Panel Exchange Center
` VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
Note (4) Definition of 9 points brightness uniformity
www.panelook.com
BB
Buni
Bmax : Maximum brightness
Bmin : Minimum brightness
Note (5) Definition of Response time : Sum of Tr, Tf
Display data
Optical Instruments
Response
(max min)
100
100%
90%
10%
0%
B
max
Black (data off)
White (data on)
T
R
White (data off)
T
F
TIME
Note (6) Definition of Luminance of White : Luminance of white at center point 㽶
Note (7) Definition of Color Chromaticity (CIE 1931)
Color coordinate of Red, Green, Blue & White at center point 㽶
Note (8) Definition of Viewing Angle
: Viewing angle range (C/R ı10)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 10
Global LCD Panel Exchange Center
XW VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
3. Electrical Characteristics
3.1 TFT LCD Module
The connector for display data & timing signal should be connected.
www.panelook.com
Ta = 25¶C
· 2 ¶C
NoteUnitMax.Typ.Min.SymbolItem
Voltage of Power Supply
Current
(a) Black
of Power
DD
I
DD
Supply
Vsync Frequency
Hsync Frequency
Main Frequency
Rush Current
V
H
DCLK
RUSH
Note (1) The ripple voltage should be controlled under 10% of VDD.
V=60Hz, fDCLK = 74.25MHz, V
(2) f
= 5.0V, DC Current.
DD
(3) Power dissipation check pattern (LCD Module only)
a) Black Pattern b) White Pattern c) N-Pattern
(1)V5.55.04.5V
mA-1800-
mA-2400-(b) White
(2),(3)
mA31002900-(c) N-Pattern
Hz-60-f
kHz-67.548f
MHz8074.2560f
(4)ATBD--I
(4) Measurement Conditions
100%
90%
10%
GND
Rush Current I
can be measured when T
RUSH
T
RUSH
=470༕
. is 470༕.
RUSH
V
DD
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 11
Global LCD Panel Exchange Center
XX VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
3.2 Back Light Unit
The back light unit contains 22 direct-lighting type CCFTs ( Cold Cathode Fluorescent
Tube ). The characteristics of lamps are shown in the following tables.
www.panelook.com
Ta=25 · 2¶C
NoteUnitMax.Typ.Min.SymbolItem
Lamp Current
Lamp Voltage
L
L
mArms7.06.04.0I
Vrms-1540-V
Note (1) It is defined as the time to take until the brightness reduces to 50% of its original value.
[Operating condition : Ta = 25·2, IL = 6.0mArms(typ.), For single lamp only. ]
HOT 1
HOT 2
Inverter
Inverter
Inverter
Inverter
HOT 1
HOT 2
LCD
Module
HOT 21
HOT 21
(1)Hour--50,000HrOperating Life Time
HOT 22
HOT 22
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 12
Global LCD Panel Exchange Center
XY VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
3.3 Inverter Input Condition & Specification
ConditionsSymbolItems
www.panelook.com
Specifications
NoteUnit
Max.Typ.Min.
Input
Voltage
Input
Current
Lamp
Current
Frequency
Backlight
On/Off
Dimming
Control
I
RUSH
LAMP
V
O
DIM
Vin=24.0V
Vdim=3.3V
Ta=25·YG¶jV26.42421.6-Vin
Initial Turn-onA8.5--
mArms6.56.05.5Vdim=3.3 VI
kHz52.55047.5Vin=24.0 VF
-
-
5.25-2.4Vin=24.0 VON
-V
0.8-0Vin=24.0 VOFF
--3.3Max Lum
-V
0--Min. Lum
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 13
Global LCD Panel Exchange Center
XZ VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
4. Block Diagram
www.panelook.com
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 14
Global LCD Panel Exchange Center
X[ VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
5. Input Terminal Pin Assignment
5.1. Input Signal & Power Connector : FI-RE51S-HF (JAE)
www.panelook.com
10
Odd
LVDS
Signal
VDD(5V)2
VDD(5V)3
RO[0]N
RO[0]P
RO[1]N
RO[1]P
RO[2]N
RO[2]P
GND
RO[CLK]N
PIN No.DescriptionPIN No.
26VDD(5V)1
27
28
29VDD(5V)4
30VDD(5V)5
31GND6
32GND7
33GND8
34GND9
35
3611
3712
3813
3914
4015
4116
4217
Even
LVDS
Signal
Description
RE[0]P
RE[1]N
RE[1]P
RE[2]N
RE[2]P
GND
RE[CLK]N
RE[CLK]P
GND
RE[3]N
RE[3]P
Do Not Connect
Do Not Connect
GND
Do Not Connect
Do Not Connect
Do Not Connect
24
25
Even
LVDS
RO[CLK]P
GND
RO[3]N
RO[3]P
RE[0]N Do Not Connect50
4318
4419
4520
4621
47Do Not Connect( Note 1 )22
48Do Not Connect23
51
Do Not Connect
Do Not Connect
LVDS Option( Note 2 )
Do Not Connect
Do Not Connect
Do Not Connect
Do Not Connect49GND
Do Not Connect
Note (1) Do Not Connect : This PINS are only used for SAMSUNG internal using.
Note (2) LVDS OPTION : If this PIN : HIGH (3.3 V) ˧ Normal LVDS format
: LOW (GND) ˧ JEIDA LVDS format
SEQUENCE : On = V
OFF = Interface Signal(T3) ˻ LVDS Option ˻ V
DD(T1) ˻ LVDS Option ˻ Interface Signal(T2)
DD
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 15
Global LCD Panel Exchange Center
X\ VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
Note(1) Pin number starts from Right side
www.panelook.com
PCB
Pin No. 1 Pin No. 51
#1
connect name
#1
#51
#51
Fig. Connector diagram
a. All GND pins should be connected together and also be connected to the LCD’s
metal chassis.
b. All power input pins should be connected together.
c. All NC pins should be separated from other signal or power.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 16
Global LCD Panel Exchange Center
X] VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
5.2. Inverter Input Pin Configuration
www.panelook.com
Connector : S14B-PHA-SM (JST)
Pin Configuration(FUNCTION)Pin No.
24 V1
24 V2
24 V3
24 V4
24 V5
GND6
GND7
11
* ERROR DETECTION (NORMAL : GND / ABNORMAL : 5V)
Backlight On /Off [ON:2.4 - 5.25 V, OFF: 0 - 0.8 V]12
Dimming Control [0V:Min, 3.3V:Max]13
5.3. Inverter Input Power Sequence
0.95 Vin
Vin (24V)
Dimming Control
( 0 ~ 3.3 V )
20msec [Min]
0.1 Vin
GND8
GND9
GND10
No Connection
No Connection14
1.1sec [Min]
0.5sec [Min]
0.5sec [Min]
Back Light On/Off
0.5sec [Min]
2.4 V
0.1sec [Min]
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 17
Global LCD Panel Exchange Center
X^ VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
5.4 LVDS Interface
- LVDS Receiver : Tcon (merged)
- Data Format (JEIDA & Normal)
LVDS Transmitter (ex : DS90C385 ) Signal Interface
Device
Input Pin
Red Pixel Data (LSB) R0TXIN0
Red Pixel Data R1TXIN1
Red Pixel Data R2TXIN2
Red Pixel Data R3TXIN3
Red Pixel Data R4TXIN4
www.panelook.com
Device Input Signal
Output
Signal
TXOUT0-
TXOUT0+
To LTA460H2
Interface
No. 1,11
No. 2,12
SymbolTerminalFunctionSymbolSymbol
RX0-
RX0+
TXIN7
Red Pixel Data (MSB) R7TXIN5
Red Pixel Data R5TXIN6
Green Pixel Data (LSB)G0
Green Pixel Data G1TXIN8
Green Pixel Data G2TXIN9
Green Pixel Data G6TXIN10
Green Pixel Data (MSB)G7TXIN11
Green Pixel Data G3TXIN12
Green Pixel Data G4TXIN13
Green Pixel Data G5TXIN14
Blue Pixel Data (LSB) B0TXIN15
Blue Pixel Data B6TXIN16
Blue Pixel Data (MSB) B7TXIN17
Blue Pixel Data B1TXIN18
Blue Pixel Data B2TXIN19
Blue Pixel Data B3TXIN20
Blue Pixel Data B4TXIN21
Blue Pixel Data B5TXIN22
Horizontal Sync (Don't care) HsyncTXIN24
TXOUT3-
TXOUT3+
TXOUT0-
TXOUT0+
TXOUT1-
TXOUT1+
TXOUT3-
TXOUT3+
TXOUT1-
TXOUT1+
TXOUT3-
TXOUT3+
TXOUT1-
TXOUT1+
TXOUT2-
TXOUT2+
No. 9,19
No. 10,20
No
. 1,11
No. 2,12
No. 3, 13
No. 4, 14
No. 9,19
No. 10,20
No. 3, 13
No. 4, 14
No. 9,19
No. 10,20
No. 3, 13
No. 4, 14
No. 5, 15
No. 6, 16
RX3-
RX3+
RX0-
RX0+
RX1-
RX1+
RX3-
RX3+
RX1-
RX1+
RX3-
RX3+
RX1-
RX1+
RX2-
RX2+
Vertical Sync (Don't care) VsyncTXIN25
Data Enable (Mandatory) DETXIN26
Red Pixel Data R6TXIN27
TXOUT3-
TXOUT3+
No. 9,19
No. 10,20
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
RX3-
RX3+
www.panelook.com
Page 18
Global LCD Panel Exchange Center
X_ VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
www.panelook.com
5.5 Input Signals, Basic Display Colors and Gray Scale of Each Color
COLOR
IC
BAS
COLOR
GRAY
SCALE
OF
RED
GRAY
SCALE
OF
GREEN
GRAY
SCALE
OF
BLUE
DISPLAY
(8bit)
UE
EN
ITE
LACK
DA
RK
↑
↓
LIGHT
LACK
DARK
↑
↓
LIGHT
EN
LACK
RK
DA
↑
↓
LIGHT
DATA SIGNAL
BLUEGREENRED
00BLACK
11111111111111100000000CYAN
1111111111111111111WH
:::::::::
::::::::::::
:::::::::::::
:::::::::
::::::::::::::::::
000000000000011111111RED
::::::
::::::::::::::::::
00000001111111100000000GRE
:::::
::::::::::::::::::
GRAY
SCALE
LEVEL
B7B6B5B4B3B2B1B0G7G6G5G4G3G2G1G0R7R6R5R4R3R2R1R0
-0000000000000000000000
-111111110000000000000000BL
-000000001111111100000000GRE
-1
-000000000000000011111111RED
-111111110000000011111111MAGENTA
-000000001111111111111111YELLOW
-11111
R0000000000000000000000000B
R1000000000000000000000001
R2000000000000000000000010
R3~
R252
R252000000000000000011111101
R252000000000000000011111110
R252000
G0000000000000000000000000B
G1000000000000000100000000
G2000000000000001000000000
G3~
G252
G252000000001111110100000000
G252000000001111111000000000
G2520
B0000000000000000000000000B
B1000000010000000000000000
B2000000100000000000000000
B3~
B252
B252111111010000000000000000
B252111111100000000000000000
B252111111110000000000000000BLUE
Note) Definition of Gray :
Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level)
Input Signal : 0 = Low level voltage, 1 = High level voltage
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 19
Global LCD Panel Exchange Center
X` VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
6. Interface Timing
6.1 Timing Parameters ( DE only mode )
www.panelook.com
NOTEUnitMAX.TYP.MIN.SYMBOLITEMSIGNAL
Clock
Hsync
Vsync
Frequency
C
H
V
Active
Vertical
Display
Period
VD
Display Term
Vertical
VB
HD
-1920-T
Clock
s
Horizontal
Total
Active
Display
Period
Display Term
Horizontal
Total
H
Note) This product is DE only mode. The input of Hsync & Vsync signal does
not have an effect on normal operation.
(1) Test Point : TTL control signal and CLK at LVDS Tx input terminal in system
(2) Internal V
DD = 3.3V
-MHz8074.25601/T
-KHz-67.548F
-Hz-60-F
-Lines-1080-T
-Lines155011251118T
-
-clocks350022002160T
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 20
Global LCD Panel Exchange Center
X\ VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
Note(1) Pin number starts from Right side
www.panelook.com
PCB
Pin No. 1 Pin No. 51
#1
connect name
#1
#51
#51
Fig. Connector diagram
a. All GND pins should be connected together and also be connected to the LCD’s
metal chassis.
b. All power input pins should be connected together.
c. All NC pins should be separated from other signal or power.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 21
Global LCD Panel Exchange Center
YX VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
YU[G}
6.3 Power ON/OFF Sequence
To prevent a latch-up or DC operation of the LCD Module, the power on/off
sequence should be as the diagram below.
0<T1˺10msec
0<T2˺50msec
0<T3˺50msec
1000msec˺T4
www.panelook.com
1000msec˺T5
(Recommend Value)
100msec˺T6
(Recommend Value)
T1 : VDDrising time from 10% to 90%
T2 : The time from V
T3 : The time from valid data off to V
T4 : V
off time for Windows restart
DD
to valid data at power ON.
DD
off at power Off.
DD
T5 : The time from valid data to B/L enable at power ON.
T6 : The time from valid data off to B/L disable at power Off.
The supply voltage of the external system for the Module input should be the same
as the definition of V
DD
.
Apply the lamp voltage within the LCD operation range. When the back light turns on
before the LCD operation or the LCD turns off before the back light turns off,
the display may momentarily show abnormal screen.
In case of V
= off level,
DD
please keep the level of input signals low or keep a high impedance.
T4 should be measured after the Module has been fully discharged between power off
and on period.
Interface signal should not be kept at high impedance when the power is on.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 22
Global LCD Panel Exchange Center
t s{h[WWoz-sWX kU u W\TWWWTnTW\XXYY w YY V Y`
www.panelook.com
7. Outline Dimension (Front View)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 23
Global LCD Panel Exchange Center
t s{h[WWoz-sWX kU u W\TWWWTnTW\XXYY w YZ V Y`
www.panelook.com
7. Outline Dimension (Rear View)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 24
Global LCD Panel Exchange Center
Y[ VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
8. PACKING
8.1 CARTON (Internal Package)
(1) Packing Form
Corrugated fiberboard box and corrugated cardboard as shock absorber
(2) Packing Method
Packing
-Pallet Box
www.panelook.com
Direction be able to open it
Cushion-Foam
LCD Module
Cushion-Foam
Pallet-Plastic
8.2 Packing Specification
LCD Packing
10ea / (Packing-
Pallet Box)
RemarkSpecificationItem
1. 125 Kg / LCD (10ea)
2. 7 Kg / Cushion-pallet (2ea)
3. 6.7 Kg / Packing-Pallet Box (1ea)
4. Cushion-pallet Material : EPS
5. Packing-Pallet Box Material : DW4
1Box / PalletPallet
VerticalPacking Direction
146.7kgTotal Pallet Weight
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
1. Pallet weight = 8kg
2. 8Kg/Pallet
1270mm(H) x 1150mm(V) x 844mm(height)H x V x heightTotal Pallet Size
Pallet(8kg) + Module(12.5*10=125) +
Cushion(up+botton=7kg) + Pallet-BOX(6.7kg)
www.panelook.com
Page 25
Global LCD Panel Exchange Center
Y\ VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
9. MARKING & OTHERS
A nameplate bearing followed by is affixed to a shipped product at the specified
location on each product.
(1) Parts number : LTA400HS-L01-XXXX
(2) Revision: One letters
(3) Lot number : X X X X XXX
(4) Nameplate Indication
www.panelook.com
XX X
Cell Position No. (In the Glass)
Glass No. (In the one Lot)
Lot No. (Glass)
Month
Year (Note1)
Product code
Line
LTA400HS-L01
XXXXXXXXXX XXX
(5) Packing box attach
LTA400HS-L01
80mm
XXXX
10
Week code : 05 29
week
year
40mm
Revision code
Lot number
100mm
Part number
Revision code
Box serial number
165mm
(6) Others
1. After service part
Lamps cannot be replaced because of the narrow bezel structure.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 26
Global LCD Panel Exchange Center
Y] VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
10. Inspection Criteria
When products are shipped, incoming inspection should be carried out with a
sampling inspection based on MIL-STD-105E level II by AQL 1.0%.
CHANGE CONTROL
Design of the product may be changed regarding the specifications, appearance, parts
used, circuits, etc. for product improvement. If a design change is judged to affect the
specifications of this product, supplier should inform customer of the change in advance.
QUALITY CONTROL
www.panelook.com
In the event of a product failure under normal operating conditions, a product trouble
or a functional disorder that can be deemed to be the responsibility of supplier, supplier
should repair the fault or replace the product free of charge within one year from
the product delivery date. However, supplier does not take responsibility for the product
quality in the case of modifications not specified by supplier.
MAINTENANCE
The specifications of the functions of maintenance parts may be partially changed
within the range which provides equivalent or better quality.
In principle, maintenance parts should be product units.
When stopping manufacturing this product, supplier should notify customer in advance.
HANDLING OF DOUBTFUL POINTS
Any doubt not stipulated in this specification is to be resolved by mutual agreement
between customer and supplier, and supplier should make efforts for improvement
in good faith.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 27
Global LCD Panel Exchange Center
Y^ VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
11. General Precautions
11.1 Handling
(a) When the Module is assembled, it should be attached to the system firmly
using all mounting holes. Be careful not to twist and bend the Module.
(b) Because the inverter use high voltage, it should be disconnected from power
before it is assembled or disassembled.
(c) Refrain from strong mechanical shock and / or any force to the Module.
In addition to damage, this may cause improper operation or damage to the Module
and CCFT back light.
(d) Note that polarizers are very fragile and could be damage easily.
Do not press or scratch the surface harder than a HB pencil lead.
www.panelook.com
(e) Wipe off water droplets or oil immediately. If you leave the droplets for a long
time, staining or discoloration may occur.
(f) If the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth.
(g) Desirable cleaners are water, IPA(Isopropyl Alcohol) or Hexane.
Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid
or Methyl chloride. It might permanent damage to the polarizer due to chemical
reaction.
(h) If the liquid crystal material leaks from the panel, it should be kept away
from the eyes or mouth . In case of contact with hands, legs or clothes, it must
be washed away with soap thoroughly.
(i) Protect the Module from static, or the CMOS Gate Array IC would be damaged.
(j) Use finger-stalls with soft gloves in order to keep display clean during the
incoming inspection and assembly process.
(k) Do not disassemble the Module.
(l) Do not pull or fold the lamp wire.
(m) Do not adjust the variable resistor located on the Module.
(n) Protection film for polarizer on the Module should be slowly peeled off just before use
so that the electrostatic charge can be minimized.
(o) Pins of I/F connector should not be touched directly with bare hands.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 28
Global LCD Panel Exchange Center
Y_ VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
11.2 Storage
(a) Do not leave the Module in high temperature, and high humidity for a long time.
It is highly recommended to store the Module with temperature from 0 to 35
and relative humidity of less than 70%.
(b) Do not store the TFT-LCD Module in direct sunlight.
(c) The Module should be stored in a dark place. It is prohibited to apply sunlight or
fluorescent light in storing.
11.3 Operation
www.panelook.com
(a) No Connection or disconnect the Module in the "Power On" condition.
(b) Power supply should always be turned on/off by the "Power on/off sequence"
(c) Module has high frequency circuits. Sufficient suppression to the electromagnetic
interference should be done by system manufacturers. Grounding and shielding methods
may be important to minimize the interference.
(d) The cable between the back light connector and its inverter power supply should
be connected directly with a minimized length. A longer cable between
the back light and the inverter may cause lower luminance of lamp(CCFT) and
may require higher startup voltage(Vs).
11.4 Operation Condition Guide
(a) The LCD product should be operated under normal conditions.
Normal condition is defined as below;
- Temperature : 20·15
- Humidity : 55·20%
- Display pattern : continually changing pattern (Not stationary)
(b) If the product will be used in extreme conditions such as high temperature,
humidity, display patterns or operation time etc.., It is strongly recommended
to contact SEC for Application engineering advice. Otherwise, its reliability and
function may not be guaranteed. Extreme conditions are commonly found at
Airports, Transit Stations, Banks, Stock market, and Controlling systems.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Page 29
Global LCD Panel Exchange Center
Y` VGY`wW\TWWXTnTW\XXYYkUGus{h[WWozTsWXtvkls
11.5 Others
(a) Ultra-violet ray filter is necessary for outdoor operation.
(b) Avoid condensation of water. It may result in improper operation or disconnection
of electrode.
(c) Do not exceed the absolute maximum rating value. ( supply voltage variation,
input voltage variation, variation in part contents and environmental temperature,
and so on)
Otherwise the Module may be damaged.
(d) If the Module keeps displaying the same pattern for a long period of time,
the image may be "sticked" to the screen.
To avoid image sticking, it is recommended to use a screen saver.
www.panelook.com
(e) This Module has its circuitry PCB's on the rear side and should be handled
carefully in order not to be stressed.
(f) Please contact SEC in advance when you display the same pattern for a long time.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Loading...