Samsung LS24C230BL-ZA User Manual
User Manual
S24C230BL
S24C230JL
S24C230JY
S27C230B
S27C230J
The color and the appearance may differ depending on
the product, and the specifications are subject to
change without prior notice to improve the performance.
BN46-00314A-02
Table Of Contents
BEFORE USING THE
PRODUCT
PREPARATIONS 18 Checking the Contents
6 Copyright
6 Icons used in this manual
7 Cleaning
7 Cleaning
7 Precautions for Storage
8 Securing the Installation Space
8 Precautions for storage
9 Safety Precautions
9Symbols
10 Electricity and Safety
11 Installation and Safety
13 Operation and Safety
17 Correct posture to use the product
18 Removing the Packaging
19 Checking the Components
CONNECTING AND USING
A SOURCE DEVICE
21 Parts
21 Frontal Buttons
22 Reverse Side
23 Installation
23 Attaching the Stand
25 Removing the Stand
26 Adjusting the Product Tilt and Height
27 Anti-theft Lock
28 Before Connecting
28 Pre-connection Checkpoints
28 Connecting the Power
Table Of Contents
2
Table Of Contents
29 Connecting and Using a PC
29 Connecting a Computer to S24C230BL and
S27C230B.
30 Connecting a Computer to S24C230JL,
S24C230JY and S27C230J
31 Driver Installation
32 Changing the Resolution Using a PC
USING THE OSD MENU
ON S24C230BL AND
S27C230B
36 SAMSUNG MAGIC Bright
36 Configuring SAMSUNG MAGIC Bright
37 Brightness
37 Configuring Brightness
38 Contrast
38 Configuring Contrast
39 Gamma
39 Configuring Gamma
40 Auto Adjustment
40 Using Auto Adjustment
41 PC/AV Mode
41 Configuring PC/AV Mode
42 Image Size
42 Changing the Image Size
44 Language
44 Configuring Language
45 Source
45 Configuring Souce
46 Exit
46 Viewing the Product Information
46 Exiting from the OSD Menu
Table Of Contents
3
Table Of Contents
USING THE OSD MENU
ON S24C230JL,
S24C230JY AND
S27C230J
47 SAMSUNG MAGIC Bright
47 Configuring SAMSUNG MAGIC Bright
48 Brightness
48 Configuring Brightness
49 Contrast
49 Configuring Contrast
50 SAMSUNG MAGIC Upscale
50 Configuring SAMSUNG MAGIC Upscale
51 Gamma
51 Configuring Gamma
52 PC/AV Mode
52 Configuring PC/AV Mode
53 Image Size
53 Changing the Image Size
TROUBLESHOOTING
GUIDE
SPECIFICATIONS 61 General
55 Language
55 Configuring Language
56 Exit
56 Viewing the Product Information
56 Exiting from the OSD Menu
57 Requirements Before Contacting
Samsung Customer Service Center
57 Testing the Product
57 Checking the Resolution and Frequency
57 Check the following.
59 Q & A
64 PowerSaver
65 Standard Signal Mode Table
Table Of Contents
4
Table Of Contents
APPENDIX
INDEX
67 Contact SAMSUNG WORLD WIDE
73 Responsibility for the Pay Service (Cost
to Customers)
73 Not a product defect
73 A Product damage caused by customer's fault
73 Others
74 Correct Disposal
74 Correct Disposal of This Product (Waste
Electrical & Electronic Equipment)
75 Terminology
Table Of Contents
5
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2013 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is
prohibited.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Before Using the Product
An administration fee may be charged if either
(a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
(b) you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
The amount of such administration charge will be advised to you before any work or home visit is
carried out.
Icons used in this manual
The following images are for reference only. Real-life situations may
differ from what is shown in the images.
Before Using the Product
6
Cleaning
!
Before Using the Product
Cleaning
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
1. Power off the monitor and computer.
2. Disconnect the power cord from the monitor.
Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
3. Wipe the monitor screen using a clean, soft and dry cloth.
Do not apply a cleaning agent that contains alcohol,
solvent, or surfactant to the monitor.
!
Do not spray water or detergent directly on the product.
4. Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the monitor.
5. Connect the power cord to the product after cleaning the product.
6. Power on the monitor and computer.
Precautions for Storage
Using an ultrasonic humidifier may cause white stains on a highly glossy product.
Be sure you contact the nearest service center (paid service) for cleaning the inside of the monitor.
Before Using the Product
7
Before Using the Product
3.93
inches
(10 cm)
3.93
inches
(10 cm)
3.93 inches(10 cm)
3.93 inches(10 cm)
3.93 inches
(10 cm)
Securing the Installation Space
Ensure some space around the product for ventilation. An internal temperature rise may cause fire
and damage the product. Be sure to allow the amount of space as shown below or greater when
installing the product.
The exterior may differ depending on the product.
Precautions for storage
Be sure to contact Samsung Customer Service Center (page 67) if the inside of the monitor needs
cleaning. (A service fee will be charged.)
Before Using the Product
8
Before Using the Product
Safety Precautions
Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
This symbol indicates that high voltage is present inside. It is dangerous to
make any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and
maintenance has been included with this product.
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
QUALIFIED PERSONNEL.
Symbols
Warning
Caution
A serious or fatal injury may result if instructions are not followed.
Personal injury or damage to properties may result if instructions are
not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
Before Using the Product
9
Before Using the Product
!
!
!
Electricity and Safety
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
An electric shock or fire may result.
Do not plug many products into the same power socket.
Otherwise, the socket may overheat and cause a fire.
Do not touch the power plug with wet hands.
Otherwise, an electric shock may result.
Insert the power plug all the way in so it is not loose.
An unstable connection may cause a fire.
Ensure you connect the power plug to a grounded power socket. (type 1
insulated devices only).
An electric shock or injury may result.
Do not bend or pull the power cord with force. Do not weigh the power cord
down with a heavy object.
A damaged power cord may cause an electric shock or fire.
Do not place the power cord or product near heat sources.
An electric shock or fire may result.
Remove foreign substances such as dust around the plug pins and power socket
with a dry cloth.
Otherwise, a fire may result.
Before Using the Product
10
Before Using the Product
!
!
!
!
Caution
Do not unplug the power cord when the product is in use.
The product may become damaged by an electric shock.
Do not use the power cord for products other than authorized products supplied
by Samsung.
An electric shock or fire may result.
Keep the power socket where the power cord is connected unobstructed.
If any problem occurs in the product, unplug the power cable to completely
cut the power to the product.
Power to the product cannot be completely cut off with the power button.
Hold the plug when disconnecting the power cord from the power socket.
An electric shock or fire may result.
Installation and Safety
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP
OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
Otherwise, a fire may result.
Avoid installing the product in a narrow space with bad ventilation, such as a
bookshelf or wall closet.
Otherwise, a fire may result due to an increased internal temperature.
Keep the plastic packaging bag for the product in a place that cannot be reached
by children.
Children may suffocate.
Before Using the Product
11
Before Using the Product
!
!
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.).
The product may fall and break or cause a personal injury.
Using the product in an area with excess vibration may damage the product
or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water
drips, etc.), oil, or smoke.
An electric shock or fire may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.
Otherwise, the product lifespan may be reduced, or a fire may result.
Caution
Do not install the product within the reach of young children.
The product may fall and injure children.
Edible oil, such as soybean oil, can damage or deform the product. Do not install
the product in a kitchen or near a kitchen counter.
Take care not to drop the product when moving it.
Otherwise, product failure or personal injury may result.
Do not set down the product on its front.
The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom
edge of the front of the product is not protruding.
The product may fall and break or cause a personal injury.
Install the product only on cabinets or shelves of the right size.
Before Using the Product
12
Before Using the Product
!
SAMSUNG
!
!
!
Put down the product carefully.
The product may fall and break or cause a personal injury.
Installing the product in an unusual place (a place exposed to a lot of fine
particles, chemical substances or extreme temperatures, or an airport or train
station where the product should operate continuously for an extended period of
time) may seriously affect its performance.
Be sure to consult Samsung Customer Service Center (page 67) before
installation if you want to install the product at such a place.
Operation and Safety
Warning
High voltage runs through the product. Do not attempt to disassemble, repair, or
modify the product on your own.
An electric shock or fire may result.
Contact Samsung Customer Service Center (page 67) for repair.
Before moving the product, turn off the power switch and disconnect the power
cable and all other connected cables.
Otherwise, the power cord may be damaged and a fire or electric shock may
result.
If the product generates a strange noise, a burning smell, or smoke, remove the
power cord immediately and contact Samsung Customer Service Center (page
67).
An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
The product may fall, and your child may become injured or seriously
harmed.
If the product falls or the exterior is damaged, power off the product, remove the
power cord, and contact Samsung Customer Service Center (page 67).
Otherwise, an electric shock or fire may result.
Do not put a heavy object, toy, or sweets on top of the product.
The product or heavy objects may fall as children try to reach for the toy or
sweets resulting in a serious injury.
Before Using the Product
13
Before Using the Product
!
!
!
GAS
!
100
If there is a thunderstorm or lightning strike, turn off the power and disconnect the
power cable.
An electric shock or fire may result.
Do not drop objects on the product or apply impact.
An electric shock or fire may result.
Do not move the product by pulling the power cord or any cable.
Otherwise, the cable may be damaged and product failure, an electric shock
or fire may result.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate
the area immediately.
Sparks can cause an explosion or fire.
Do not lift or move the product by pulling the power cord or any cable.
Otherwise, the cable may be damaged and product failure, an electric shock
or fire may result.
Do not use or keep combustible spray or an inflammable substance near the
product.
An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
Otherwise, a fire may result from an increased internal temperature.
Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable
object (paper, match, etc.) into the vent or ports of the product.
If water or any foreign substance enters the product, be sure to power off the
product, remove the power cord, and contact Samsung Customer Service
Center (page 67).
Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
If water or any foreign substance enters the product, be sure to power off the
product, remove the power cord, and contact Samsung Customer Service
Center (page 67).
Product failure, an electric shock or fire may result.
Before Using the Product
14
Before Using the Product
!
-_-
!
!
!
!
Caution
Leaving the screen fixed on a stationary image for an extended period of time
may cause afterimage burn-in or defective pixels.
If you are not going to use the product for an extended period of time,
activate power-saving mode or a moving-picture screen saver.
Disconnect the power cord from the power socket if you do not plan on using the
product for an extended period of time (vacation, etc.).
Otherwise, a fire may result from accumulated dust, overheating, an electric
shock, or electric leakage.
Use the product at the recommended resolution and frequency.
Otherwise,Your eyesight may deteriorate.
Do not put DC power adapters together.
Otherwise, a fire may result.
Remove the plastic bag from the DC power adapter before you use it.
Otherwise, a fire may result.
Do not let water enter the DC power device or get the device wet.
An electric shock or fire may result.
Avoid using the product outdoors where it can be exposed to rain or snow.
Be careful not to get the DC power adapter wet when you wash the floor.
Do not put the DC power adapter near to any heating apparatus.
Otherwise, a fire may result.
Keep the DC power adapter in a well-ventilated area.
Looking at the screen too close for an extended period of time can deteriorate
your eyesight.
Before Using the Product
15
Before Using the Product
!
!
!
Do not hold the monitor upside-down or move it by holding the stand.
The product may fall and break or cause a personal injury.
Do not use humidifiers or stoves around the product.
An electric shock or fire may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
Eye fatigue will be relieved.
Do not touch the screen when the product has been turned on for an extended
period of time as it will become hot.
Store the small accessories used with the product out of reach of children.
Exercise caution when adjusting the product angle or stand height.
Otherwise, children's fingers or hands may become stuck and injured.
Tilting the product excessively may cause it to fall and result in personal
injury.
Do not place heavy objects on the product.
Product failure or personal injure may result.
Before Using the Product
16
Before Using the Product
Correct posture to use the product
Use the product in the correct posture as follows:
Straighten your back.
Allow a distance of 45 to 50cm between your eye and the screen, and look slightly
downward at the screen.
Keep your eyes directly in front of the screen.
Adjust the angle so light does not reflect on the screen.
Keep your forearms perpendicular to your upper arms and level with the back of
your hands.
Keep your elbows at about a right angle.
Adjust the height of the product so you can keep your knees bent at 90 degrees or
more, your heels attached to the floor, and your arms lower than your heart.
Before Using the Product
17
Preparations
1
1.1 Checking the Contents
1.1.1 Removing the Packaging
1 Open the packaging box. Be careful not to damage the product when you open the packaging with
a sharp instrument.
2 Remove the styrofoam from the product.
3 Check the components and remove the styrofoam and plastic bag.
4 Store the box in a dry area so that it can be used when moving the product in the future.
This image is for reference only.
1 Preparations
18
1
Preparations
1.1.2 Checking the Components
Contact the dealer from whom you purchased the product if any item is missing.
The appearance of the components and items sold separately may differ from the image shown.
Components - S24C230BL, S27C230B
Quick setup guide Warranty card
(Not available in some
locations)
Power cable DC power adapter D-SUB cable (optional)
DVI cable (optional) HDMI-DVI cable (optional) Stand
User manual
Stand Connector headphone holder (optional) screws (optional)
Components may vary depending on the country.
1 Preparations
19
1
Preparations
Components - S24C230JL, S24C230JY, S27C230J
Quick setup guide Warranty card
(Not available in some
Power cable DC power adapter DVI cable (optional)
Stand Stand Connector headphone holder (optional)
screws (optional)
Components may vary depending on the country.
User manual
locations)
1 Preparations
20
Preparations
MENU
MENU
MENU
1
1.2 Parts
1.2.1 Frontal Buttons
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Icons Description
Press this button to display the On Screen Display (OSD).
When in the menu, press this button to move down to the option
below, or adjust values in the OSD.
OSD control lock: Maintain the current settings, or lock the OSD
control to prevent unintended changes to settings.
Enable: To lock the OSD control, press and hold the [ ] button
for 10 seconds.
Disable: To unlock the OSD control, press and hold the [ ]
button for more than 10 seconds.
Even if the OSD Adjustment Lock function is activated, users can still
use that function key to adjust the brightness,contrast and also can exit
the OSD.
When OSD is not displayed, press this button to power on/off the
product.
When OSD is displayed, press this button to access sub OSD, or
activate the OSD menu.
(Power LED)
This LED is turned on when the product works normally.
To reduce power consumption, it is best to remove the power cable
when you will not be using the product for an extended period of time.
1 Preparations
21
1
S24C230BL, S27C230B
S24C230JL, S24C230JY, S27C230J
DC 14V
RGB IN
Preparations
1.2.2 Reverse Side
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Port About ports
Connects to the DC power adapter.
DVI IN
Connect to a source device using an DVI cable.
Connect to a PC using the D-SUB cable.
1 Preparations
22
Preparations
1
1.3 Installation
1.3.1 Attaching the Stand
Before assembling the product, place the product down on a flat and stable surface so that the screen
is facing downwards.
Insert the stand neck into the
stand base in the direction
shown in the figure.
Place a soft cloth over the table
to protect the product and place
the product onto the cloth so
that the front of the product is
facing downwards.
Check that the stand neck is
firmly connected.
Put the headphone holder in the
place shown by figure.
Tightly fasten the connecting
screw at the bottom of the stand
base.
Turn the connecting screws fully
so that it is completely fixed.
1 Preparations
23
1
Preparations
Hold the main body of the
product with your hand as shown
by the figure.
Push the assembled stand into
the main body in the direction of
the arrow as shown in the figure.
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
- Caution
Do not hold the product upside
down only by the stand.
1 Preparations
24
Loading...