Samsung LS23CFUKFV-ZA User Manual

Download

Page 1

LCD Monitor

User Manual

SyncMaster 2333HD

Page 2

Safety Instructions

Notational

Note

These safety instructions must be followed to ensure your safety and prevent property damage.

Make sure to read the instructions carefully and use the product in the correct manner.

Warning / Caution

Otherwise, it may result in death or personal injury. Otherwise, it may result in personal injury or property damage.

Notational Conventions

Power

Prohibited

Do not disassemble

Do not touch

When not used for extended period of time, set your computer to DPM. If using screen saver, set it to active screen mode. The images here are for reference only, and are not applicable in all cases (or

countries). Shortcut to Anti-Afterimage Instructions

Do not use a damaged power cord or plug or a damaged or loose power

outlet.

Important to read and understand at all times

Disconnect the plug from the outlet

Ground to prevent an electric shock

• Otherwise, this may result in electric shock or fire.

Do not touch the power plug with wet hands when removing or plug-

ging the plug into the outlet.

• Otherwise, this may result in electric shock.

Make sure to connect the power cord to a grounded power outlet.

• Otherwise, it may result in electric shock or personal injury.

Page 3

Safety Instructions

Ensure that the power plug is plugged into the power outlet firmly and

correctly.

• Otherwise, this may result in fire.

Do not forcefully bend or pull the power plug and do not place any

heavy material on it.

• Otherwise, this may result in fire.

Do not connect multiple appliances to the same power outlet.

• Otherwise, this may cause fire due to overheating.

Do not disconnect the power cord while using the product.

• Otherwise, this may result in damage to the product due to electric shock.

To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

Installation

• This may cause electric shock or fire.

Use only the power cord provided by our company. Do not use the provided power cord of another product.

• Otherwise, this may result in fire or electric shock.

Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc.

Failure to do so may cause serious damage to your monitor.

Do not drop the monitor when moving it.

• This may cause damage to the product or the person carrying it.

Ensure that at least two persons lift and move the product.

• Otherwise, it may be dropped and cause personal injury, and/or dam-

age the product.

When installing the product in a cabinet or rack, make sure that the front end of the bottom of the product does not project out.

• Otherwise, it may fall or cause personal injury.

• Use a cabinet or rack of a size appropriate to the product.

Page 4

Safety Instructions

Do not place candles, mosquito repellant, cigarettes and any heating appliances near the product.

• Otherwise, this may result in fire.

Keep heating appliances as far away from the power cord or the product as possible.

• Otherwise, this may result in electric shock or fire.

Do not install it in a badly ventilated location such as a bookcase or closet.

• Otherwise, this may result in fire due to an increase in the internal

temperature.

Put down the monitor carefully.

• Failing to do so may damage the monitor.

Do not place the front of the product on the floor.

• Otherwise, this may result in damage to the screen display.

Ensure that an authorized installation company installs the wall mount.

• Otherwise, it may fall and cause personal injury.

• Make sure to install the specified wall mount.

Install your product in a well ventilated location. Ensure that there is a clearance of more than 10 cm from the wall.

• Otherwise, it may result in fire due to an increase in the internal tem-

perature.

Bend the outdoor antenna cable downwards at the location where it goes in so that rainwater does not flow in.

• If rainwater enters the product, it may result in electric shock or fire.

Install the antenna far away from any high voltage cables.

• If the antenna touches or falls onto a high voltage cable, it may result

in electric shock or fire.

Ensure that the packaging vinyl is kept away from children.

• Otherwise, it may result in serious harm (suffocation) if children play

with it.

If the height of your monitor is adjustable, do not place any object or part of your body on the stand when lowering it.

• This may cause damage to the product or the person carrying it.

Page 5

Clean

Safety Instructions

When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric.

Do not spray cleaner directly onto the surface of the product.

• Otherwise, this may result in the discoloration and distortion of the

structure and the screen surface may peel off.

Clean the product using a soft cloth with a monitor cleaner only. If you must use a cleaner other than the monitor cleaner, dilute it with water at a ratio of 1:10.

When cleaning the power plug pins or dusting the power outlet, clean it with a dry cloth.

• Otherwise, it may result in fire.

When cleaning the product, make sure to disconnect the power cord.

• Otherwise, it may result in electric shock or fire.

When cleaning the product, disconnect the power cord and clean it softly with a dry cloth.

• (Do not use chemicals such as wax, benzene, alcohol, thinner, mos-

quito repellant, lubricant, or cleaner.) These may change the appearance of the product surface and peel off the indication labels on the product.

Since the product housing is easily scratched, make sure to use the specified cloth only.

• Use the specified cloth adding only a little water. As the product may

be scratched if there is any foreign material on the cloth, make sure to shake it thoroughly before using it.

When cleaning the product, do not spray water directly onto the main body of the product.

• Ensure that water does not enter the product and that it is not wet.

• Otherwise, this may result in electric shock, fire or a malfunction.

Others

The product is a high voltage product. Ensure that users do not disassemble, repair or modify the product themselves.

• Otherwise, this may result in electric shock or fire. If the product

needs to be repaired, contact a Service Center.

Page 6

Safety Instructions

If there is a strange smell or a strange sound or smoke is coming from the product, disconnect the power plug immediately and contact a Service Center.

• Otherwise, this may result in electric shock or fire.

Do not place this product in a location exposed to moisture, dust, smoke, water, or in a car.

• Otherwise, this may result in electric shock or fire.

When you drop the product or the case is broken, turn the power off and disconnect the power cord. Contact a Service Center.

• Otherwise, this may result in electric shock or fire.

If thunder or lightening is occurring, do not touch the power cord or antenna cable.

• Otherwise, this may result in electric shock or fire.

Do not try to move the monitor by pulling only the wire or the signal cable.

• Otherwise, it may fall and result in electric shock, damage to the

product or fire due to damage to the cable.

Do not lift or move the product back and forwards or right and left while only holding the power cord or signal cables.

• Otherwise, it may fall and result in electric shock, damage to the

product or fire due to damage to the cable.

Make sure that the ventilating opening is not blocked by a table or curtain.

• Otherwise, it may result in fire due to an increase in the internal tem-

perature.

Do not place any containers containing water, vases, flowerpots, medicines as well as any metal on the product.

• If water or a foreign material enters the product, disconnect the power

cord and contact a Service Center.

• This may result in a product malfunction, electric shock, or fire.

Do not use or keep combustible spray or flammable material near the product.

• Otherwise, this may result in an explosion or fire.

Do not insert any metal, such as chopsticks, coins, pins and steel, or flammable objects, such as matches or paper, inside the product (through the ventilating openings, input and output terminals, etc).

• If water or foreign material enters the product, disconnect the power

cord and contact a Service Center.

• Otherwise, this may result in electric shock or fire.

Page 7

Safety Instructions

When using a fixed screen for a long time, an afterimage or stain may occur.

• If you are not using your product for a long period of time, put it into

sleep mode or use a moving screen saver.

Set a resolution and frequency appropriate to the product.

• Otherwise, your eyesight may be damaged.

When using headphones or earphones, do not turn the volume too high.

• Having the sound too loud may damage your hearing.

If you continually move closer to the product screen, your eyesight may be failing.

To ease eye strain, take at least a five-minute break after every hour of using the monitor.

Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations.

• Otherwise, it may fall and cause personal injury and/or damage the

product.

• If you use the product in a location exposed to vibrations, it may

damage the product and result in fire.

When moving the product, turn the power off and disconnect the power plug, antenna cable, and all the cables connected to the product.

• Otherwise, it may result in electric shock or fire.

Ensure that children do not hang onto the product or climb up onto the product.

• The product may fall and cause personal injury or death.

If you do not use the product for a long period of time, disconnect the power cord from the power outlet.

• Otherwise, this may result in overheating or fire due to dust, and may

result in fire due to electric shock or leakage.

Do not place any heavy items or toys or confectionery, such as cookies etc. that may attract the attention of children and to the product.

• Your children may hang onto the product causing it to fall and this

may result in personal injury or death.

Page 8

Safety Instructions

Be careful that children do not place the battery in their mouths when removed from the remote control. Place the battery in a location that children or infants cannot reach.

• If children have had the battery in their mouths, consult your doctor

immediately.

When replacing the battery, insert it with right polarity (+, -).

• Otherwise, the battery may become damaged or it may cause fire,

personal injury or damage due to leakage of the internal liquid.

Use only specified standard batteries. Do not use new and used batteries together.

• This may cause a battery to break or leak and may cause fire, injury,

or contamination (damage).

The batteries (and rechargeable batteries) are not ordinary refuse and must be returned for recycling purposes. The customer is responsible for returning the used or rechargeable batteries for recycling.

• The customer can return used or rechargeable batteries to a nearby

public recycling center or to a store selling the same type of the battery or rechargeable battery.

Do not turn the product upside down or move it while holding only the stand.

• Otherwise, it may fall and result in personal injury and/or damage to

the product.

Do not place the product in a location exposed to direct sunlight or near any heat such as a fire or heater.

• This may reduce the lifetime of the product, and may result in fire.

Do not drop any objects onto the product or cause any impact to the product.

• Otherwise, this may result in electric shock or fire.

Do not use a humidifier or kitchen table near the product.

• Otherwise, this may result in electric shock or fire.

When there is a gas leak, do not touch the product or the power plug but ventilate immediately.

• If a spark occurs, it may cause an explosion or fire.

If the product has been turned on for a long time, the display panel becomes hot. Do not touch it.

Page 9

Safety Instructions

Be careful when adjusting the angle of the product or the height of the stand.

• This may result in personal injury as your hand or fingers may be-

come caught.

• Also, if you tilt the product too far, it may fall and cause personal

injury.

Do not install the product in a location low enough for children to reach.

• Otherwise, it may fall and result in personal injury.

• Since the front part of the product is heavy, install the product on a

level and stable surface.

Do not put any heavy objects on the product.

• This may result in personal injury and/or damage to the product.

Good Postures When Using the Monitor

When using the product, use it in the correct position.

• Keep your back straight while looking at the product.

• The distance between your eyes and the screen should be between 45 to 50 cm. Look at the screen from a slightly higher location than the height of the screen.

• When using the product, use it in the correct position.

• Adjust the angle so that light is not reflected on the screen.

• Place your arms perpendicular to your sides and allow your arms to be level with the back of the hand.

• Keep your elbow at 90 degrees.

• Keep your knees at greater than 90 degrees, and keep your heels firmly on the floor. Keep your arms lower than your heart.

Page 10

Introduction

Package Contents

Note

Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items.

Unpacking

Without stand With stand

Monitor Monitor

Manuals

Quick Setup Guide Warranty Card

(Not available in all loca-

Cables

D-Sub Cable Power Cord

User's Guide

tions)

DVI Cable

Page 11

Others

Introduction

Remote Control

BN59-00678A

Cable holding ring Stereo Cable

Note

Cleaning Cloth is only provided for highly polished black products as a product feature.

Sold separately

Batteries (AAA X 2)

(Not available in all loca-

tions)

Cleaning Cloth

Digital audio optic output cable

USB Cable TV Antenna Cable

Audio cable

HDMI Cable Headphones

Component(PR, PB, Y) Cable

(Coaxial Cable)

Page 12

Your Monitor Front

Introduction

Activates a highlighted menu item.

Push the ' ', button to change the input signal source. Changing the source is only allowed for external devices connected to the product

at the time. To switch Screen modes:

[PC] →[DVI] → [TV] → [Component] → [HDMI1] → [HDMI2]

>> Click here to see an animation clip

Use this button to open the on-screen menu and to exit from the on-screen menu or to close the screen adjustment menu.

+ / -

Moves from one menu item to another horizontally or adjusts selected menu values. Adjusts the audio volume.

Moves from one menu item to another vertically or adjusts selected menu values. In TV mode, selects TV channels.

Power button [ ]

Use this button for turning the product on and off.

Remote Control Sensor

Aim the remote control towards this spot on the Monitor.

Page 13

Rear

Introduction

Power indicator

This light is lit when operating normally, and blinks once when your adjustments are saved.

Note

See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed or when leaving it unattended for long periods.

Speaker

You can hear sound by connecting the soundcard of your PC to the monitor.

Note

The configuration at the back of the product may vary from product to product.

POWER

PC IN

Connect the power cord for your monitor to the

POWER port on the back of the product.

Page 14

HDMI/PC/DVI-D AUDIO IN , DIGITAL AUDIO OUT (OPTICAL) , EX-LINK

Introduction

Connect the PC terminal at the back of your monitor to your computer.

HDMI/PC/DVI-D AUDIO IN

Connect the [ HDMI/PC/DVI-D AUDIO IN ] terminal at the back of your product to your computer’s sound card.

DIGITAL AUDIO OUT(OPTICAL)

SERVICE

DVI-D IN / HDMI IN 1

Connect the [DIGITAL AUDIO OUT(OPTICAL)] terminal of your product to the digital

sound output or standard sound output terminal of the DVD home theater (or amplifier) using a digital audio optical output cable.

EX-LINK

This is a reserved terminal used for servicing.

Page 15

COMPONENT IN

Introduction

DVI-D IN

Connect the DVI cable to the DVI-D IN port on the back of your product.

HDMI IN 1

Connect the [HDMI IN 1] terminal at the back of your monitor to the HDMI terminal of your digital output device using a HDMI cable.

R - AUDIO - L

Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [ R - AUDIO - L] port of the product.

PR, PB,Y

ANT IN

Kensington Lock

Connect the VIDEO OUT port of the DVD / DTV Set-Top Box to the [ PR, PB,Y ] input ports using a component video cable ( PR, PB,Y ).

Connect the CATV cable or TV antenna cable to the "ANT IN" port on the rear side of the product. Make sure to use a TV antenna cable (sold separately) as the antenna cable.

Page 16

Introduction

The Kensington Lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use. The locking device has to be purchased separately.

Note

The location of the Kensington Lock may be different depending on its model.

Using the Anti-Theft Kensington Lock

1. Insert the locking device into the Kensington slot on the Monitor ( ) and turn it in the locking direction ( ).

2. Connect the Kensington Lock cable.

HDMI IN 2 /

Cable holding ring

3. Fix the Kensington Lock to a desk or a heavy stationary object.

HDMI IN 2

Connect the [HDMI IN 2] terminal at the back of your product to the HDMI terminal of your digital output device using a HDMI cable.

Connect your headphones to the Headphone connection terminal.

Fix the cables using the holding ring, as shown in the figure.

Note

See Connecting Cables for further information regarding cable connections.

Remote Control

Page 17

Introduction

POWER

Number Buttons

- button + VOL TOOLS

INFO

COLOR BUTTONS CC MTS

SOURCE

PRE-CH

Down-Up Left-Right buttons

MUTE

RETURN

ENTER

EXIT

SRS

FAV.CH

P.SIZE

1. POWER

2. TV

3. Number Buttons Press to change the channel.

4. - button The "-" button operates only for TV. It is used to select MMS

5. + VOL - Adjusts the audio volume.

Turns the product On/Off.

Selects the TV mode directly.

(multi-channel) for a TV.

6. TOOLS Use to quickly select frequently used functions.

7. Right buttons

9. COLOR BUTTONS Press to add or delete channels and to store channels to the favorite

10. CC Controls the caption decoder.

Down-Up Left-

INFO

Moves from one menu item to another horizontally, vertically or adjusts selected menu values.

Current picture information is displayed on the upper left corner of the screen.

channel list in the “Channel List” menu.

Page 18

Introduction

11. MTS You can select the MTS (Multichannel Television Stereo) mode.

Mono, Stereo, SAP (Separate Audio Program) Set 'MTS' to ON to choose Mono, Stereo or SAP.

12. MENU

13. SOURCE

14. PRE-CH This button is used to return to the immediately previous channel.

15. CH In TV mode, selects TV channels.

16. MUTE

17. RETURN

18.

19. EXIT

20.

21. FAV.CH Press to switch to your favorite channels.

ENTER

SRS

Opens the on-screen menu and exits from the menu or closes the adjustment menu.

Press the button to change the input signal SOURCE. Changing the SOURCE is only allowed for external devices that

are connected to the monitor at the time.

Pauses (mutes) the audio output temporarily.This is displayed on the lower left corner of the screen.The audio resumes if MUTE or

- VOL + is pressed in the Mute mode. Returns to the previous menu.

Activates a highlighted menu item.

Exits from the menu screen.

Not Available.

22. P.SIZE Press to change the screen size.

Page 19

Connections

Connecting Cables Connecting to a Computer

Connect the power cord for your monitor to the POWER port on the back of the monitor.

Plug the power cord for the monitor into a nearby outlet.

Use a connection appropriate for your computer.

Using the D-sub (Analog) connector on the video card.

• Connect the signal cable to the [PC IN] port on the back of your monitor.

[PC IN]

Using the DVI (Digital) connector on the video card.

• Connect the DVI Cable to the [DVI-D IN] Port on the back of your Monitor.

[DVI-D IN]

Connect the [HDMI / PC / DVI-D AUDIO IN] port on the rear side of the monitor to the sound

card of the PC.

Note

• You may enjoy clear and quality sound from the computer sound card using the monitor speakers. (You don't need to install any separate speakers for your computer.)

• You may get a blank screen depending on the type of video card you are using, if you connect simultaneously both the D-sub and DVI cables to one computer.

• If you connect properly your monitor using the DVI connector but get a blank or fuzzy screen, check to see if the monitor status is set to analogue. Press 'SOURCE [ ]' button to have the monitor

double-check the input signal source.

Page 20

Connecting to a Macintosh

Connect the power cord for your monitor to the POWER port on the back of the monitor.

Plug the power cord for the monitor into a nearby outlet.

Using the D-sub (Analog) connector on the video card.

• Connect the signal cable to the D-SUB port on the back of your monitor.

Connections

[PC IN]

Note

Turn on the monitor and Macintosh.

Connecting to Other devices

Note

• This monitor allows the user to connect it to such input devices as a DVD player, a VCR or camcorder, or a DTV or TV without disconnecting the PC.

• The configuration at the back of the monitor may vary from product to product.

• The DVI to HDMI cable, digital audio optic output cable, and RCA to stereo (for PC) cable are all sold separately.

Contact a Service Center to purchase any products sold separately.

Connecting TV

Note

You may view television programs on the monitor if it is connected to an antenna or CATV cable without installing any separate TV reception hardware or software on your computer.

Page 21

Connections

1. Connect the CATV cable or TV antenna cable to the "ANT IN" port on the rear side of the monitor.

Make sure to use a TV antenna cable (sold separately) as the antenna cable.

• When using an interior antenna terminal:

Check the antenna terminal on the wall first and connect the antenna cable.

• When using an outdoor antenna:

If you are using an outdoor antenna, use a professional for installation if possible.

• To connect the RF cable to the antenna input terminal:

Keep the copper wire portion of the RF cable straight.

2. Turn on the monitor.

3. Select TV using the TV button on the remote control.

4. Select a desired TV channel.

Note

Is weak signal causing poor reception?

Purchase and install a signal amplifier for better reception.

Connecting DVD / Set Top Box

Note

Connect to the DVD / Set Top Box input if the device has a [COMPONENT IN] connector. You can watch Component simply by hooking up the Component with the monitor as long as the power is on.

Connect the port of the DVD, VCR (DVD / Set-Top Box) to the [R-AUDIO-L] port of the monitor.

Connect the VIDEO OUT port of the DVD / Set-Top Box to the [PR, PB,Y] input ports using a

component video cable (PR, PB,Y).

Note

Select "Component" using the 'SOURCE [ ]'

If you connect the PR, PB, and Y component cables to the incorrect terminals, the screen will be displayed in red or blue.

Page 22

For single-family houses, install an UHF antenna to receive digital broadcasting.

Connecting HDMI

Note

You can connect digital output devices to your monitor. You can enjoy better screen and sound quality.

1. Connecting Using a HDMI Cable

Connections

Input devices such as digital DVD are connected to the [HDMI IN1] or [HDMI IN2] terminal of the monitor using the HDMI cable. When all the connections are completed, connect the power cords for the monitor and DVD(or the device connected to the digital output terminal).

Select HDMI using the ‘SOURCE [

2. Connecting Using a DVI to HDMI Cable

Connect the DVI output terminal of a digital output device to the [HDMI IN1] or [HDMI

IN2]terminal of the monitor using a DVI to HDMI cable.

]‘ button.

Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital output device, and connect the opposite jack to the [HDMI/PC/ DVI-D AUDIO IN]terminal of the monitor.

(3) When all the connections are completed, connect the power cords for the monitor and DVD (or the device connected to the digital output terminal).

Page 23

(4) Select "HDMI" using the 'SOURCE [ ]' button.

Note

If you just connect using the DVI to HDMI cable without connecting to the sound source, you cannot hear sound.

Connecting the audio output terminal of a digital device to the [R-AUDIO-L] of [COMPONENT

IN] of the monitor using an audio cable will not give you sound. Make sure to connect to the [HDMI / PC/DVI-D AUDIO IN] terminal of the monitor.

Connecting and Using an Amplifier

Note

You can connect the digital sound input (optical) or standard sound input terminal of your amplifier to your monitor using the correct cable.

Connections

1. Connect the [DIGITAL AUDIO OUT (OPTICAL)] terminal of your monitor to the digital sound input terminal of your digital amplifier using an optical cable.

2. Set the Internal Mute On in the Sound menu using the MENU button.

3. Adjust the sound volume using the Volume button of your amplifier

4. If the connections are set up, power up your monitor and amplifier.

Note

• Because no sound is emitted from the monitor, you need to use an amplifier.

• For information on how to connect a speaker and amplifier, refer to the respective user manuals

provided by their manufacturers.

Connecting Headphone

Note

You may connect your headphones to the monitor.

Page 24

1. Connect your headphones to the Headphone connection terminal.

Using the Stand Tilt angle

Connections

You can adjust the tilt angle within a range of 0° forward to 20° backward for the most comfortable viewing angle.

Attaching a Base

This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad.

Monitor

Mounting interface pad (Sold separately)

Page 25

Connections

1. Turn off your monitor and unplug its power cord.

2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.

3. Remove four screws and then remove the stand from the LCD monitor.

4. Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base.

• Do not use screws longer than the standard dimension, as they may damage the inside of the Monitor.

• For wall mounts that do not comply with VESA standard screw specifications, the length of the screws may differ depending on their specifications.

• Do not use screws that do not comply with the VESA standard screw specifications.

Do not fasten the screws too tightly, as this may damage the product or cause the product to fall, leading to personal injury.

Samsung is not liable for these kinds of accidents.

• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.

• To mount the monitor on a wall, you should purchase the wall mounting kit that allows you to mount the monitor at least 10 cm away from the wall surface.

• Contact the nearest Samsung Service Center for more information. Samsung Electronics will not be responsible for damages caused by using a base other than those specified.

• Please use Wall Mount according to the International standards.

Page 26

Using the Software

Monitor Driver

Note

When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions appropriate for the operating system you have.

Prepare a blank disk and download the driver program file at the Internet web site shown here.

Internet web site :

http://www.samsung.com/ (Worldwide)

Installing the Monitor Driver (Automatic)

1. Insert CD into the CD-ROM drive.

2. Click "Windows".

3. Choose your monitor model in the model list, then click the "OK" button.

4. If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button (Microsoft® Windows® XP/2000 Operating System).

Page 27

Using the Software

Note

This monitor driver is under certifying MS logo, and this installation doesn't damage your system.

The certified driver will be posted on Samsung Monitor homepage.

http://www.samsung.com/

Installing the Monitor Driver (Manual)

Microsoft® Windows Vista™‚ Operating System

1. Insert your Manual CD into your CD-ROM drive.

Click

(Start) and "Control Panel". Then, double-click on "Appearance and Personalization".

3. Click "Personalization" and then "Display Settings".

4. Click "Advanced Settings...".

5. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is.

If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue".

Page 28

Using the Software

Note

This monitor driver is under certifying MS logo, and this installation doesn't damage your system. The certified driver will be posted on Samsung Monitor homepage.

6. Click "Update Driver..." in the "Driver" tab.

7. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device drivers on my computer".

8. Click "Have Disk...” and select the folder (for example, D:\Drive) where the driver setup file is located, and click "OK".

Page 29

Using the Software

9. Select the model that matches your monitor from the list of monitor models on the screen, and click "Next".

10. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence.

Microsoft® Windows® XP Operating System

Page 30

Using the Software

1. Insert CD into the CD-ROM drive.

2. Click "Start" → "Control Panel" then click the "Appearance and Themes" icon.

3. Click "Display" icon and choose the "Settings" tab then click "Advanced...".

4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab.

5. Click "Update Driver..." and select "Install from a list or..." then click "Next" button.

6. Select "Don't search, I will..." then click "Next" and then click "Have disk".

Page 31

Using the Software

7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model list and click the "Next" button.

8. If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button.

Note

This monitor driver is under certifying MS logo, and this installation doesn't damage your system.

The certified driver will be posted on Samsung Monitor homepage.

http://www.samsung.com/

9. Click the "Close" button then click "OK" button continually.

Page 32

Using the Software

10. Monitor driver installation is completed.

Microsoft® Windows® 2000 Operating System

When you can see "Digital Signature Not Found" on your monitor, follow these steps.

1. Choose "OK" button on the "Insert disk" window.

2. Click the "Browse" button on the "File Needed" window.

3. Choose A:(D:\Driver) then click the "Open" button and then click "OK" button.

How to install

1. Click "Start", "Setting", "Control Panel".

2. Double click the "Display" icon.

3. Select the "Settings" tab and click "Advanced Properties" button.

4. Choose "Monitor".

Case1 : If the "Properties" button is inactive, it means your monitor is properly configured. Please stop installation

Case2 : If the "Properties" button is active, click the "Properties" button then follow next steps continually.

5. Click "Driver" and then click on "Update Driver..." then click on the "Next" button.

6. Choose "Display a list of the known drivers for this device so that I can choose a specific driver" then click "Next" and then click "Have disk".

7. Click the "Browse" button then choose A:(D:\Driver).

8. Click the "Open" button, then click "OK" button.

9. Choose your monitor model and click the "Next" button then click "Next" button.

10. Click the "Finish" button then the "Close" button.

If you can see the "Digital Signature Not Found" window then click the "Yes" button. And click the "Finish" button then the "Close" button.

Microsoft® Windows® Millennium Operating System

1. Click "Start", "Setting", "Control Panel".

2. Double click the "Display" icon.

3. Select the "Settings" tab and click "Advanced Properties" button.

Page 33

Using the Software

4. Select the "Monitor" tab.

5. Click the "Change" button in the "Monitor Type" area.

6. Choose "Specify the location of the driver".

7. Choose "Display a list of all the driver in a specific location..." then click "Next" button.

8. Click the "Have Disk" button.

9. Specify A:\(D:\driver) then click "OK" button.

10. Select "Show all devices" and choose the monitor that corresponds to the one you connected to your computer and click "OK".

11. Continue choosing "Close" button and "OK" button until you close the Display Properties dialogue box.

Microsoft® Windows® NT Operating System

1. Click "Start", "Settings", "Control Panel", and then double-click "Display" icon.

2. In Display Registration Information window, click Settings Tab and then click "All Display Modes".

3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and then click "OK".

4. Click "Apply" button if you see the screen working normally after clicking "Test". If the screen is not normal, change to a different mode (lower mode of resolution, colors or frequency).

Note

If there is no Mode at All Display Modes, select the level of resolution and vertical frequency by referring to the Preset Timing Modes in the user guide.

Linux Operating System

To execute X-Window, you need to make the X86Config file, which is a type of system setting file.

1. Press "Enter" at the first and the second screen after executing the X86Config file.

2. The third screen is for setting your mouse.

3. Set a mouse for your computer.

4. The next screen is for selecting a keyboard.

5. Set a Keyboard for your computer.

6. The next screen is for setting your monitor.

7. First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly.)

8. Set a vertical frequency for your monitor. (You can enter the frequency directly.)

9. Enter the model name of your monitor. This information will not affect the actual execution of X-Window.

10. You have finished setting up your monitor. Execute X-Window after setting other requested hardware.

Page 34

Natural Color Natural Color Software Program

Using the Software

One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor. The Natural Color S/W is the very solution for this problem. It is a color administration system developed by Samsung Electronics in association with Korea Electronics & Telecommunications Research Institute (ETRI). This system is available only for Samsung monitors and makes the color of the images on the monitor the same as the printed or scanned images. For more information, refer to Help (F1) in the software program.

How to install the Natural Color software

Insert the CD included with the Samsung monitor into the CD-ROM Drive. Then, the initial screen of the program Natural Color will be executed. Click Natural Color on the initial screen to install the Natural Color software.

To install the program manually, insert the CD included with the Samsung monitor into the CD-ROM Drive, click the [Start] button of Windows and then select [Run...]. Enter D:\color\NCProSetup.exe and then press the [Enter] key. (If the drive where the CD is inserted is not D:\, enter the applicable drive.)

How to delete the Natural Color software program

Select "Setting/Control Panel" on the "Start" menu and then double-click "Add/Delete a program". Select Natural Color from the list and then click the "Add/Delete" button.

MultiScreen

Page 35

Installation

1. Insert the installation CD into the CD-ROM drive.

2. Click the MultiScreen installation file.

3. When the Installation Shield Wizard window appears, click "Next".

4. Select "I agree to the terms of the license agreement" to accept the terms of use.

5. Choose a folder to install the MultiScreen‚ program.

6. Click "Install".

7. The "Installation Status" window appears.

8. Click "Finish".

Using the Software

Note

If the popup window to install the software for the main screen is not displayed, proceed with the installation using the MultiScreen executable file on the CD.

9. When the installation is complete, the Multiscreen executable icon appears on your desktop. Double-click the icon to start the program.

Multiscreen execution icon may not appear depending on specification of computer system or monitor. If that happens, press F5 Key.

Installation Problems

The installation of MultiScreen can be affected by such factors as the video card, motherboard and the network environment.

System Requirements

• Windows 2000

• Windows XP Home Edition

• Windows XP Professional

• Windows Vista™

It is recommended using MultiScreen in Windows® 2000 or later.

Uninstall

Hardware

• 32 MB Memory above

• 60 MB Hard disk space above

The Multiscreen program can be removed only by using the "Add or Remove Programs" option of the Windows® Control Panel.

Perform the following steps remove Multiscreen.

Page 36

Using the Software

Select "Setting/Control Panel" on the "Start" menu and then double-click "Add/Delete a program". Select Multiscreen from the list and then click the "Add/Delete" button.

Page 37

Adjusting the LCD Display

Picture

Available Modes

PC / DVI TV Component HDMI

Note

The default setting may be different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution.

Picture : PC / DVI MagicBright

MagicBright is a feature providing optimum viewing environment depending on the contents of the image you are watching. Currently five different modes are available: Entertain, Internet, Text, Dynamic Contrast and Custom. Each mode has its own pre-configured brightness value.

• Entertain

High Brightness For watching motion pictures such as a DVD or VCD

• Internet

For working with a mixture of images such as texts and graphics.

• Text

For documents or works involving heavy text.

• Dynamic Contrast

Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast.

• Custom

Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste.

Page 38

Adjusting the LCD Display

If this is the case, adjust the Brightness and Contrast by using the OSD menu.

MENU → → → , → → MENU,EXIT

Contrast / Brightness / Sharpness

(Not available in MagicBright mode of Dynamic Contrast.)

You can use the on-screen menus to change the contrast and brightness according to personal preference.

• Contrast : Adjust the Contrast.

• Brightness : Adjust the Brightness.

• Sharpness : Adjust the Sharpness.

MENU →

Auto Adjustment

→ , → → , , , → → MENU,EXIT

The values of Fine, Coarse and Position are adjusted automatically.

By changing the resolution in the control panel, auto function is performed.

(Available in PC Mode Only)

MENU →

→ , → → MENU,EXIT

Page 39

Screen

(Available in PC mode only)

- Coarse / Fine

Adjusting the LCD Display

- Position

• Coarse

Removes noise such as vertical stripes.

Coarse adjustment may move the screen image area. You may relocate it to the center using the horizontal control menu.

• Fine

Removes noise such as horizontal stripes.

If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed).

MENU → → , → → → , , , → → MENU,EXIT

Adjusts the screen location horizontally and vertically.

MENU → → , → → , → → , , , → MENU,EXIT

Page 40

- Image Reset

Image parameters are replaced with the factory default values.

MENU → → , → → , → → MENU,EXIT

- Resolution

Adjusting the LCD Display

Displays the resolution set on the PC.

Picture Options

- Color Tone

Page 41

The tone of the color can be changed. (Available in PC / DVI mode only)

• Cool / Normal / Warm / Custom

MENU → → , → → → , → → MENU,EXIT

- R-Gain / G-Gain / B-Gain

Adjusting the LCD Display

- Size

Adjusts the individual R, G, B color controls.

MENU → → , → → , → → , , , → MENU,EXIT

You can switch the Size.

• 16:9 / 4:3

MENU → → , → → , → → , → MENU,EXIT

Page 42

Reset

Adjusting the LCD Display

Picture parameters are replaced with the factory default values.

• OK

• Cancel

MENU → → , → → , → → MENU,EXIT

Picture : TV / Component / HDMI Mode

The Monitor has three automatic picture settings ("Dynamic", "Standard", and "Movie") that are preset at the factory.

You can activate either Dynamic, Standard, or Movie.

• Dynamic

Selects the picture for high-definition in a bright room.

• Standard

Selects the picture for optimum display in a normal environment.

• Movie

Selects the picture for viewing movies in a dark room.

Page 43

Adjusting the LCD Display

MENU → → → , → → MENU,EXIT

Backlight / Contrast / Brightness / Sharpness / Color / Tint

You can use the on-screen menus to change the contrast and brightness according to personal preference.

• Backlight : Adjust the screen brightness by adjusting the LCD backlight.

• Contrast : Adjust the Contrast.

• Brightness : Adjust the Brightness.

• Sharpness : Adjust the Sharpness.

• Color : Adjusts the picture color.

• Tint : Adds a natural tone to the display.

MENU → → , → → , , , → → MENU,EXIT

Picture Options

- Color Tone

The tone of the color can be changed.

• Cool1 / Cool2 / Normal / Warm1 / Warm2

Page 44

- Size

Adjusting the LCD Display

Note

“Warm1” or “Warm2” is only activated when the picture mode is “Movie”.

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

MENU → → , → → → , → → MENU,EXIT

You can switch the Size.

The direct button on the remote control is 'P.SIZE' button.

• 16:9 - Sets the picture to 16:9 wide mode.

• Zoom1 - Magnifies the size of the picture on the screen.

• Zoom2 - Magnifies the size of the picture more than “Zoom1”.

• Wide Fit - Enlarges the aspect ratio of the picture to fit the entire screen.

• 4:3 - Sets the picture to 4:3 normal mode.

• Just Scan - Use the function to see the original image where its part being cut-off minimized with

HDMI (720p/ 1080i / 1080p), Component (1080i / 1080p) or DTV (1080i) input signals.

Note

- After selecting Zoom1, Zoom2 or Wide Fit : Press the

the ENTER button. Press the or button to move the picture up and down..

- Reset : Press the or button to select Reset, then press the ENTER button. You can initialize

the setting.

- Settings can be adjusted and stored for each external device you have connected to an input of the

TV.

or button to select Position, then press

Input Source Picture Size

TV, Component (480i,480p) 16:9, Zoom1, Zoom2, 4:3 DTV(1080i), Component (1080i,

1080p) ,HDMI(720p,1080i,1080p)

16:9, Wide Fit, 4:3, Just Scan

Page 45

MENU → → , → → , → → , → MENU,EXIT

- Digital NR

Digital Noise Reduction. If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction

feature to help reduce any static and ghosting that may appear on the screen.

Adjusting the LCD Display

• Off - Turns the screen noise reduction function off.

• Low - Reduces screen noise at a low level.

• Medium - Reduces screen noise at a medium level.

• High - Reduces screen noise at a high level.

• Auto - Automatically recognizes and reduces screen noise.

MENU →

- HDMI Black Level

→ , → → , → → , → MENU,EXIT

When a DVD or set-top box is connected to your TV via HDMI, it may cause a degradation in the screen quality, such as an increase in the black level, a low contrast, or discoloration, etc., depending on the external device connected. In this case, adjust the screen quality of your TV by configuring the HDMI Black Level. This function is active only when the an external device (DVD player, STB etc.) is connected to the TV via HDMI(RGB Signal).

(Available in HDMI Mode Only)

Page 46

• Normal / Low

MENU → → , → → , → → , → MENU,EXIT

- Film Mode

The Film Mode feature offers you a theater-quality viewing experience.

Adjusting the LCD Display

Reset

“Film mode” is supported in TV, Component (480i / 1080i) and HDMI (480i / 1080i)

• Off / Auto

MENU →

Picture parameters are replaced with the factory default values.

→ , → → , → → , → MENU,EXIT

Sound

• OK

• Cancel

MENU →

Available Modes

PC / DVI TV Component HDMI

→ , → → , → → MENU,EXIT

Page 47

Mode

Adjusting the LCD Display

Note

The default setting may be different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution.

The Monitor has a built-in high fidelity stereo amplifier.

• Standard

• Music

• Movie

• Speech

• Custom

MENU →

Equalizer

Choose Standard for the standard factory settings.

Choose Music when watching music videos or concerts.

Choose Movie when viewing movies.

Choose Speech when watching a show that is mostly dialogue (i.e., news).

Choose Custom if you want to adjust the settings according to personal preference.

, → → → , → → MENU,EXIT

Page 48

You can adjust the left and right sound balance and the low or high volume as required.

MENU → , → → , → → , , , → → MENU,EXIT

Multi-Track Options Preferred Language

Adjusting the LCD Display

You can select the audio language.

(Available in DTV Mode Only)

MENU → , → → , → → → , → → MENU,EXIT

Multi-Track Sound

• Mono : Choose for channels that are broadcasting in mono or if you are having difficulty receiving

a stereo signal.

• Stereo : Choose for channels that are broadcasting in stereo.

• SAP : Choose to listen to the Separate Audio Program, which is usually a foreign-language trans-

lation.

(Available in Analog TV Mode Only)

MENU → , → → , → → → , → → MENU,EXIT

Page 49

Auto Volume

Reduces the differences in volume level among broadcasters.

• Off

• On

Adjusting the LCD Display

MENU→ , → → , → → , → → MENU,EXIT

TV Speaker

If you set this menu "On", sound output from the speakers is muted in case of using the home theater.

• Off

• On

Channel

MENU → , → → , → → , → → MENU,EXIT

Available Modes

PC / DVI TV Component HDMI

Page 50

Antenna

Adjusting the LCD Display

Note

The default setting may be different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution.

You can select a normal or wired channel.

If ANT IN are connected, select the antenna input you want. If the antenna input is not selected properly, noise may appear on the screen.

• Air

• Cable

MENU →

Auto Program

, → → → , → → MENU,EXIT

The TV automatically cycles through all of the available channels and stores them in memory.

In rare cases, "Auto program" may miss a few channels due to weak signals and the channels may not be added to the channel memory.

• Air

• Cable

Page 51

• Auto

MENU → , → → , → → , → → , , , → → MENU,EXIT

Clear Scrambled Channel

The Clear Scrambled Channel function is used to filter out scrambled channels after "Auto Program" is completed. It removes the scrambled channels from the list by tuning the digital cable

channels. This process may take up to 20~30 minutes.

Adjusting the LCD Display

(This function is only available in Cable mode.) MENU → , → → , → → MENU,EXIT

Channel List

You can manage the channels.

Note

Using the Color buttons on the Remote with the Channel List.

• Red (Antenna): Switches to Air or Cable.

• Green (Zoom): Enlarges or shrinks a channel number.

• Yellow (Select): Selects multiple channel lists.

• TOOLS (Option): Displays the Add(or Delete), Add to Favorite(or Delete from Favorite),

Timer Viewing, Channel Name Edit, and Auto Program menus..

All

Page 52

Added

Adjusting the LCD Display

MENU → , → → , → → → , → → , → → → , → → MENU,EXIT

Note

Favorite

• All selected channels will be shown on “Added” menu.

MENU → , → → , → → , → → , → → , → → → → MENU,EXIT

Note

• Only memorized channels can be set as favorite channels.

• All favorite channels will be shown in the “Favorite” menu.

MENU → MENU,EXIT

, → → , → → , → → → , → → → , → →

Page 53

Name

Adjusting the LCD Display

If channel name information is broadcast when you store the channels either manually or automatically, the names are assigned to the channels directly. You can however change these names or assign new names as required.

(Available in Analog TV Mode Only)

MENU → , → → , → → , → → , , , → → , → →MENU,EXIT

Fine Tune

Due to weak signals or an incorrect antenna configuration, some of the channels may not be tuned correctly.

(This function is only available in “Cable” mode.)

MENU → , → → , → → , → → , → → MENU,EXIT

Page 54

Signal Strength

Unlike analog channels, which can vary in reception quality from "snowy" to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels.

Adjusting the LCD Display

If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength. Continue to adjust the antenna until you find the best position with the strongest signal.

MENU →

Setup

Available Modes

PC / DVI TV Component HDMI

The default setting may be different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution.

Plug & Play

, → → , → → → MENU,EXIT

Note

You can manage the entire configuration.

Page 55

MENU → , → → → → → , → → , → → , → → , , ,

Language

You can choose one of 3 languages.

Adjusting the LCD Display

→ → → → , → → → , → → , → →

The language chosen affects only the language of the OSD.

MENU → , → → → , → → MENU,EXIT

Time Clock

You can set the current time.

- Clock Mode

• Auto / Manual

MENU → , → → , → → → → , → → MENU,EXIT

Page 56

- Clock Set

“Clock Set” are available only when “Clock Mode” set to “Manual”.

Adjusting the LCD Display

Note

MENU → , → → , → → → , → → , , , → → MENU,EXIT

- Time Zone

“Time Zone” are available only when “Clock Mode” set to “Auto”.

MENU → , → → , → → → , → → , → → MENU,EXIT

Note

Page 57

- DST

Adjusting the LCD Display

• Off / On

Note

• “DST” are available only when “Clock Mode” set to “Auto”.

• Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs,

• The Antenna or cable must be connected in order to set the time automatically.

MENU → , → → , → → → , → → , → → MENU,EXIT

Sleep Timer

set the time manually.

Use to set the Monitor to be turned off automatically in certain minutes.

• Off, 30, 60, 90, 120, 150, 180

MENU → , → → , → → , → → , , , → → MENU,EXIT

Page 58

Timer1 / Timer2 / Timer3

You can set the monitor to be turned on or off automatically at a specified time.

Note

Setting the clock is necessary in order to use the various timer features of the product.

Adjusting the LCD Display

Three different On/Off Timer Settings can be made.

MENU → , → → , → → , → → , , , → → MENU,EXIT

V-Chip

Protects children from viewing inappropriate programs by blocking certain broadcast or AV programs. (More Information)

V-Chip Lock

The default PIN code of a new TV set is 0-0-0-0.

If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to 0-0-0-0 : Power Off → Mute → 8 → 2 → 4 → Power On.

• Off / On

MENU → , → → , → → **** → → , → → MENU,EXIT

Page 59

TV Parental Guidelines

MENU → , → → , → → **** → , → → , , , → → MENU,EXIT

MPAA Rating

Adjusting the LCD Display

MENU → , → → , → → **** → , → → , , , → → MENU,EXIT

Canadian-English

MENU → , → → , → → **** → , → → , , , → → MENU,EXIT

Page 60

Canadian-French

MENU → , → → , → → **** → , → → , , , → → MENU,EXIT

Downloadable U.S. Rating

Adjusting the LCD Display

Parental restriction levels differ depending on the broadcasting station.

• The default menu name and Downloadable US rating change depending on the downloaded in-

formation.

• Even if you set the On-screen display to your desired language, the"Downloadable U.S. Rating"

menu will appear in English only.

• The rating titles(For example: Humor Level..etc) and TV ratings(For example:DH,MH,H..etc) may

differ depending on the broadcasting station.

• The rating will automatically block certain categories that are more restrictive.

MENU →

, → → , → → **** → , → → , , , → → MENU,EXIT

Page 61

Change PIN

MENU → , → → , → → **** → , → → **** , **** → → MENU,EXIT

Caption

Enables or disables the Caption feature and sets the appearance of closed caption text.

Adjusting the LCD Display

Caption

• Off / On

MENU →

, → → , → → → , → → MENU,EXIT

Caption Mode - Analog

Page 62

Adjusting the LCD Display

The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to TV. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.)

The Defaultis “CC1“.

• CC1 : The Primary Synchronous Caption Service. These are captions in the primary language that

must be in sync with the sound, preferably matched to a specific frame

• CC2 : The Special Non-Synchronous Use Captions. This channel carries data that is intended to

augment information carried in the program.

• CC3 : Secondary Synchronous Caption Service. Alternate program-related caption data, typically

second language captions.

• CC4 : Special Non-Synchronous Use Captions. Similar to CC2.

• Text1 : First Text Service. This may be various non-program related data.

• Text2 : Second Text Service. Additional data, usually not program related.

• Text3 / Text4 : Third and Fourth Text Services. These data channels should be used only if Text1

and Text2 are not sufficient.

MENU → , → → , → → , → → , → → MENU,EXIT

Caption Mode - Digital

The Digital Captions function operates on digital channels.

MENU → , → → , → → , → → , → → MENU,EXIT

Page 63

Digital Caption Options

Digital Caption Options are available only when Default and Service1~Service6 can be selected in Caption Mode.

Service1~Service6 in digital caption mode may not be available depending on the broacast.

Adjusting the LCD Display

• Size : This option consists of Default, Smart, Standard, Large. The default is Standard.

• Font Style : This option consists of Default, Style0, Style1, Style2, Style3, Style4, Style5,

Style6, Style7. You can change the font you want. The default is Style0.

• Foreground Color : This option consists of Default, White, Black, Red, Green, Blue, Yellow,

Magenta, Cyan. You can change the color of the letter. The default is White.

• Background Color : This option consists of Default, White, Black, Red, Green, Blue, Yellow,

Magenta, Cyan. You can change the color of the background color of the caption. The default is Black.

• Foreground Opacity : This option consists of Default, Transparent, Translucent, Solid, Flash-

ing. You can change the opacity of the letter.

• Background Opacity : This option consists of Default, Transparent, Translucent, Solid, Flash-

ing. You can change the background opacity of the caption.

• Return to Default : This option sets each of Size, Font Style, Foreground Color, Background

color, Foreground Opacity and Background Opacit to its default.

MENU →

Note

The availability of captions depends on the program being broadcast. Default means to follow the standard set by the broadcaster.

, → → , → → , → → → , → → MENU,EXIT

Foreground and Background cannot be set to have the same color.Foreground Opacity and Back- ground Opacity’cannot be both set to Transparent.

Page 64

Melody

Adjusting the LCD Display

A melody sound can be set to come on when the monitor is powered On or Off.

• Off : Turns off the melody function.

• Low : Sets the melody volume to low.

• Medium : Sets the melody volume to medium.

• High : Sets the melody volume to high.

- The Melody does not play.

- When no sound is output from the TV because the MUTE button has been pressed.

- When no sound is output from the TV because the volume has been reduced to minimum with the

VOL button.

- When the TV is turned off by Sleep Timer function.

MENU → , → → , → → , → → MENU,EXIT

Light Effect

Note

You can turn on/off the LED on the front of monitor according to the situation. Use it for saving power or when the LED dazzles your eyes.

Page 65

• Off : LED will not come on.

• In Standby : Turns the LED on in standby mode.

• When Watching TV : Turns the LED on while watching TV.

• Always : LED is always on.

MENU → , → → , → → , → → MENU,EXIT

Light Level

Adjusting the LCD Display

Use to adjust the light level i.e., the brightness of the light. MENU → , → → , → → , → → MENU,EXIT

Energy Saving

This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the "Energy Saving" mode option to "High" to reduce eye fatigue as well as power consumption.

• Off : Turns off the energy saving function.

• Low : Sets the TV to low energy saving mode.

• Medium : Sets the TV to medium energy saving mode.

• High : Sets the TV to high energy saving mode.

MENU →

, → → , → → , → → MENU,EXIT

Page 66

SW Upgrade

It is used to upgrade software and can only be used for service purposes. Users cannot upgrade software themselves.

• USB

Adjusting the LCD Display

MENU → , → → , → → → →MENU,EXIT

Input

Available Modes

PC / DVI TV Component HDMI

The default setting may be different depending on the selected Input Mode (input signal source selected in External Input List) and the selected resolution.

Source List

Note

Use to select PC, TV or other external input source connected to the Monitor.Use to select the screen of your choice.

The direct button on the remote control is "SOURCE" button.

• PC, DVI, TV, Component, HDMI1, HDMI2

Page 67

MENU → , → → → , →

Edit Name

Name the input device connected to the input jacks to make your input source selection easier

• VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder /

Adjusting the LCD Display

PC / TV / IPTV / Blu-Ray / HD DVD / Digital Media Adapter

MENU →

, → → , → → → , → → MENU,EXIT

Page 68

Troubleshooting

Self-Test Feature Check

Note

• Check the following items yourself before calling for service. Contact the service center for prob-

lems that you cannot solve by yourself.

• Your monitor provides a self test feature that allows you to check whether your monitor is func-

tioning properly.

Self-Test Feature Check

1. Turn off both your computer and the monitor.

2. Unplug the video cable from the back of the computer.

3. Turn on the monitor. The figure shown below ("Check Signal Cable") appears on a black background when the mon-

itor is in its normal working condition though it does not sense any video signal: While in the Self-Test mode, the LED power indicator remains green and the figure moves around on the screen.

4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.

If your monitor screen remains blank after using the previous procedure, check your video controller and computer system; your monitor is functioning properly.

Not Optimum Mode

If the vertical resolution is not optimum mode, you can still see the display but the warning message below appears and disappears after one minute.

The user must adjust the frequency within that one minute.

Note

Refer to Specifications > Preset Timing Modes for the resolutions or frequencies that are supported by the monitor.

Maintenance and Cleaning

1. Maintaining the Monitor Case.

Page 69

Troubleshooting

Clean with a soft cloth after disconnecting the power cord.

• Do not use benzene, thinner or other flammable substances, or a wet cloth.

• We recommend a Samsung cleansing agent is used to prevent damage to the screen.

2. Maintaining the Flat Panel Display Screen.

Clean with a soft cloth (cotton flannel) smoothly.

• Never use acetone, benzene or thinner. (They may cause flaws or deformation of the screen sur-

face.)

• The user will be required to pay costs and related expenses for repair of damages caused by him/her.

Symptoms and Recommended Actions

Note

A monitor recreates visual signals received from the computer. Therefore, if there is trouble with the computer or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the SOURCE of the problem, and then contact a service center or your dealer.

1. Check if the power cord and the video cables are properly connected to the computer.

2. Check if the computer beeps more than 3 times when booting.

(If it does, request an after-service for the main board of the computer.)

3. If you installed a new video card or if you assembled the PC, check if you installed the adapter (video) driver and the monitor driver.

4.Check if the scanning ratio of the video screen is set at 56 Hz ~ 75 Hz.

(Do not exceed 60 Hz when using the maximum resolution.)

5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel, System, Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.

Check List

Note

Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer.

1. Problems related to Installation

Note

Problems related to the monitor installation and their solutions are listed.

Page 70

PC Mode

Q: It appears the PC does not function normally.

A: Check if the Display Adapter Driver (VGA Driver) is properly installed. (Refer to Installing

Driver)

Q: The monitor screen flickers.

A: Check if the signal cable between the computer and the monitor is securely connected and tight-

ened.(Refer to Connecting the monitor)

TV Mode

Q: TV screen is blurred or shows noise signals.

A: Check if the TV antenna connector is securely connected to the external antenna.(Refer to

Connecting TV)

2. Problems related to Screen

Note

Troubleshooting

Problems related to the monitor screen and their solutions are listed.

Q: Screen is blank and power indicator is off

A: Ensure that the power cord is firmly connected and the LCD monitor is on.(Refer to the Con-

necting the monitor)

Q: "Check Signal Cable" message

A: Ensure that the signal cable is firmly connected to the PC or video SOURCEs.(Refer to the

Connecting the monitor)

A: Ensure that the PC or video SOURCEs are turned on.

Q: "Not Optimum Mode" message

A: Check the maximum resolution and the frequency of the video adapter.

A: Compare these values with the data in the Preset Timing Modes Chart.

Q: Picture rolls vertically.

A: Check if the signal cable is securely connected.Connect it again securely. (Refer to Connecting

the monitor)

Q: Image is not clear. Picture is blurred.

A: Run Frequency Coarse and Fine tuning.

A: Turn on again after removing all accessories(video extension cable, etc.)

A: Set resolution and frequency to the recommended ranges.

Q: Picture image is unstable and vibrates.

Ghost images are shown in the picture.

Page 71

Troubleshooting

A: Check if the resolution and frequency set for the computer video card falls in the range supported

by the monitor. If not, reset them referring to the current Information under the monitor menu and Preset Timing Modes.

Q: The image is too light or too dark A: Adjust the Brightness and Contrast.(Refer to the Brightness, Contrast)

Q: Power Indicator blinks green.

A: The monitor is currently saving the changes made in settings to the OSD memory.

Q: Screen is blank and power indicator light is steady green or blinks every 0.5 or 1 seconds

A: The monitor is using its power management system

A: press a key on the keyboard

Q: The screen is blank and is blinking.

A: If you see the "TEST GOOD" message on the screen when you press the MENU button, check

the cable connection between the monitor and the computer to ensure that the connector is properly connected.

3. Problems related to Audio

Note

Problems related to audio signals and their solutions are listed below.

Q: No sound

A: Ensure that the audio cable is firmly connected to both the audio-in port on your monitor and

the audio-out port on your sound card.(Refer to the Connecting the monitor)

A: Check the volume level.(Refer to the Volume)

Q: The sound level is too low.

A: Check the volume level.(Refer to the Volume)

A: If the volume is still too low after turning the control to its maximum, check the volume control

on the computer sound card or software program.

4. Problems related to Remote Control

Note

Problems related to the remote control and their solutions are listed.

Q: The remote control buttons do not respond.

A: Check the battery polarities (+/-).

A: Check if the batteries have been exhausted.

A: Check if the power is on.

A: Check if the power cord is securely connected.

A: Check if a special fluorescent or neon lamp is on in the vicinity

Page 72

Troubleshooting

5. You may see small particles if you look closely at the edge of the bezel surrounding the screen.

This is part of the product’s design and is not a defect.

Q & A

Q: How can I change the frequency?

A: The frequency can be changed by reconfiguring the video card.

A: Note that video card support can vary, depending on the version of the driver used. (Refer to the

computer or the video card manual for details.)

Q: How can I adjusts the resolution?

A: Windows XP:

Set the resolution in the Control Panel → Appearance and Themes → Display → Settings.

A: Windows ME/2000:

Set the resolution in the Control Panel → Display → Settings.

* Contact the video card manufacturer for details.

Q: How can I set the Power Saving function?

A: Windows XP:

Set the resolution in the Control Panel → Appearance and Themes → Display → Screen Saver.

Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual).

A: Windows ME/2000:

Set the resolution at the Control Panel → Display → Screen Saver.

Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual).

Q: How can I clean the outer case/LCD Panel?

A: Disconnect the power cord and then clean the monitor with a soft cloth, using either a cleaning

solution or plain water.

Do not leave any detergent or scratches on the case. Do not let any water enter the monitor.

Q: What are the benefits of digital broadcasting?

A: Digital TV broadcasting generates less noise and provides clearer visuals and sound than analog

TV broadcasting does. As services develop, you can also enjoy various information services because various kinds of data besides video and audio can be sent.

A: For example, while watching a sports game, you can view various data on your favorite player

or you can view all or selected screens which have been captured from different angles for a specific scene. In addition, you can receive information on a previous story or drama or you can buy home shopping products such as an accessory currently on TV.

Page 73

Troubleshooting

Digital TV broadcasting allows you to easily access various information services in your home creating a more information-oriented home.

Q: What is the difference between HDTV and SDTV?

A: There are various types of digital TVs.

A: The most widely known types of digital TV are HDTV and SDTV. They are classified according

to the screen quality and the video specifications.

• HDTV (High Definition TV): High screen quality, very clear TV.

• SDTV (Standard Definition TV): Common standard digital TV.

A: An SDTV has an aspect ratio of 4:3 which is the same as that of an analog TV. SDTV has an

aspect ratio of 16:9 which is similar to a cinema screen. This provides a much better screen quality than SDTV. It's like having a theater in your home.

A: Digital TV broadcasting in our country is ultimately orientated towards HDTV.

Q: Can I watch HD broadcasting with all digital TVs?

A: You can receive all digital broadcasts, whether they are SD or HD, using any digital TV. How-

ever, you cannot enjoy HD programs, which are the highest quality digital TV programs, using an SD digital TV. Especially, as SD broadcasting has an aspect ratio of 4:3, HD broadcasting has an aspect ratio of 16:9, similar to a cinema screen.

Therefore, to enjoy the full benefits of digital TV, it is better to purchase an HD digital TV.

(At present, all digital TVs from Samsung Electronics have the 16:9 wide aspect ratio.)

Q: Can I watch digital TV broadcasting with an analog TV?

A: No.

A: The analog TV cannot interpret digital signals. Therefore, a digital TV is required to watch digital

TV broadcasting.

Q: Can I use my present antenna to receive digital broadcasting?

A: As for existing analog TV, digital TV is designed so that digital broadcasting signals are received

via both indoor and outdoor antennas.

A: If signal reception is very good in your environment, you can watch digital broadcasts with your

existing indoor antenna. If not, it is better to install an outdoor UHF antenna.

Q: How do I connect an antenna for an apartment or tenement house?

A: Consult the superintendent's office or broadcasting facility administrator for your apartment or

tenement house to check whether UHF reception is available.

A: Even if digital TV broadcasting is available in your area, if you cannot watch it because the

superintendent's office or common broadcasting facility does not rebroadcast the signal, you have to install an indoor or outdoor antenna.

A: Alternatively, your local cable broadcasting company provides a digital TV service, and you can

subscribe to it.

A: If a cable broadcasting company is sharing a common broadcasting facility for your apartment

or tenement house, it has to adjust and send digital TV signals so that they are compatible to shared viewing which is the original purpose of the common broadcasting facility.

Page 74

Specifications

General

Model Name SyncMaster 2333HD

LCD Panel

Size 23 inch ( 58cm) Display area 509.76 mm(H) x 286.74 mm(V) Pixel Pitch 0.2655 mm(H) x 0.2655 mm(V)

Synchronization

Horizontal 30 ~ 81kHz Vertical 56 ~ 75kHz

Display Color

16.7M

Resolution

Optimum resolution 1920x1080@60Hz (RB) Maximum resolution 1920x1080@60Hz (RB)

Input Signal. Terminated

RGB Analog. DVI(Digital Visual Interface)

0.7 Vp-p ±5 % separate H/V sync. Composite TTL level (V high ≥ 2.0 V. V low ≤ 0.8 V)

Maximum Pixel Clock

138.500 MHz

Power Supply

AC 100 - 240 V~ (+/- 10 %). 50/60 Hz ± 3 Hz

Signal Cable

15pin - to - 15pin D-sub cable. Detachable DVI-D to DVI-D connector. Detachable

Dimensions (W x H x D) / Weight

557.8 x 363.8 x 74.0 mm / 22.0 x 14.3 x 2.9 inch / 5.5 kg / 12.1 Ibs(Without stand)

557.8 x 415.3 x 218.8 mm / 22.0 x 16.4 x 8.6 inch / 6.1 kg / 13.4 Ibs(With stand)

VESA Mounting Interface

100 mm x 100 mm

Page 75

Specifications

Environmental considerations

Operating Temperature : 50 °F ~ 104 °F (10 °C ~ 40 °C)

Humidity : 10 % ~ 80 %, non-condensing

Storage Temperature : -4 °F ~ 113 °F (-20 °C ~ 45 °C)

Humidity : 5 % ~ 95 %, non-condensing

Plug and Play Capability

This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor installation will proceed automatically, unless the user wishes to select alternate settings.

Dot Acceptable

TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems.

For example, the number of TFT-LCD sub pixels contained in this product are 6,220,800.

Design and specifications are subject to change without prior notice.

This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas. (Class B equipment emits less electromagnetic waves than Class A equipment.)

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your computer. Use the software utility installed on your computer to set up this feature.

Power Indicator On Blinking Off

Power Consump-

Note

Class B Equipment (Information Communication equipment for residential use)

State Normal Operation Power saving mode Power off (Power button)

EPA/ENERGY 2000

tion

53 watts less than 2 watts

(Off-mode)

less than 1 watts (120Vac)

This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPM functionality.

As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.

Page 76

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjusts the screen as follows.

Specifications

Display Mode Horizontal

Frequency

(kHz)

IBM, 640 x 350 31.469 70.086 25.175 +/IBM, 640 x 480 31.469 59.940 25.175 -/-

IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/MAC, 832 x 624 49.726 74.551 57.284 -/-

MAC, 1152 x 870 68.681 75.062 100.000 -/-

VESA, 640 x 480 37.861 72.809 31.500 -/VESA, 640 x 480 37.500 75.000 31.500 -/VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 800 x 600 48.077 72.188 50.000 +/+

VESA, 800 x 600 46.875 75.000 49.500 +/+ VESA, 1024 x 768 48.363 60.004 65.000 -/VESA, 1024 x 768 56.476 70.069 75.000 -/VESA, 1024 x 768 60.023 75.029 78.750 +/+ VESA, 1024 x 768 60.023 75.029 78.750 +/+ VESA, 1152 x 864 67.500 75.000 108.000 +/+ VESA, 1280 x 800 49.702 59.810 83.500 +/+ VESA, 1280 x 960 60.000 60.000 108.000 +/+

VESA, 1280 x 1024 63.981 60.020 108.000 +/+ VESA, 1280 x 1024 79.976 75.025 135.000 +/+

VESA, 1440 x 900 55.935 59.887 106.500 -/+

VESA, 1600 x 1200 75.000 60.000 162.000 +/+ VESA, 1680 x 1050 69.290 59.954 146.250 -/+ VESA, 1920 x 1080 66.587 59.934 138.500 +/-

Vertical Fre-

quency (Hz)

Pixel Clock

(MHz)

Sync Polarity

(H/V)

Horizontal Frequency The time to scan one line connecting the right edge to the

left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Horizontal Cycle is called the Horizontal Frequency. Unit: kHz

Vertical Frequency Like a fluorescent lamp, the screen has to repeat the same

image many times per second to display an image to the user. The frequency of this repetition is called the Vertical Frequency or Refresh Rate. Unit: Hz

Page 77

Information

For Better Display

Adjust the computer resolution and screen injection rate (refresh rate) on the computer as described below to enjoy the best picture quality. You can have an uneven picture quality on screen if the best picture quality is not provided for TFT-LCD.

• Resolution: 1920 x 1080

• Vertical frequency (refresh rate): 60 Hz

TFT-LCD panels manufactured by using advanced semiconductor technology with a precision of 1ppm (one millionth) and above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without any problems.

• For example, the number of TFT-LCD sub pixels contained in this product are

6,220,800.

When cleaning the monitor and the panel outside, please apply the recommended small amount of cleaner by using a soft cloth to polish. Do not force the LCD area but rub softly.

If excessive force is applied, you may stain it.

If you are not satisfied with the picture quality, you can get better quality of picture by performing the "Auto Adjustment function" in display screen that is appeared as window termination button is pressed.

If there's still noise after the automatic adjustment, use the Fine/Coarse adjustment function.

When viewing a fixed screen for an extended period of time, a residual image or blurriness may appear.

Change the mode to energy save or set a screensaver to move the picture when you need to be away from the monitor for an extended period of time.

Do not display a still image( such as on a video game or when hooking up a DVD to this LCD_TV ) on the Color TFT-LCD ( Thin Film Transister Liquid Crystal Display) panel for a long time as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of this screen when displaying a still image.

Watching Digital Broadcasting Correctly

Digital 16:9 HD Broadcast-

ing Screen

Digital SD Broadcasting

Screen

Digital 4:3 Broadcasting

Screen

This screen is shown when

scenes are captured using dig-

ital broadcasting equipment

This screen is shown when

scenes are converted to ana-

log broadcasting signals be-

fore being sent. Humans and

This screen is shown when

scenes created via analog sig-

nals are displayed while

Page 78

Information

and they are sent in HDTV

(16:9) mode.

Note

If temporary stops, mosaic screens, or jagged screens occur, this is not a TV problem. Contact your cable broadcasting company for a check-up.

For information on how to connect and use your video, DVD, DVD combo, home theater, PC, etc., refer to their respective user manuals.

objects appear heavier than in

reality.

PRODUCT INFORMATION (Image Retention Free)

LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time.

This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention.

Warranty Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty.

watching HDTV broadcast-

ing.

What is Image retention ?

During normal operation of a LCD panel, pixel image retention doesn't occur. However, if the same image is displayed for a long time, a slight difference in electric charge accumulates between the two electrodes which encase the liquid crystal. This may cause the liquid crystal to build up in a certain areas of the display. Thus, the previous image is retained when switching to a new video image. All display products, including LCD, are subject to image retention. This is not a product defect.

Please follow the suggestions below to protect your LCD from image retention.

Power Off, Screen Saver, or Power Save Mode

Ex)

• Turn the power off when using a stationary pattern.

• Turn the power off for 4 hours after 20 hours in use

• Turn the power off for 2 hours after 12 hours in use

• Use a Screen saver if possible

• Screen saver in one color or a moving image is recommended.

• Set the Monitor to power off with the PC Display Properties Power Scheme.

Suggestions for specific applications

Ex) Airports, Transit Stations, Stock Markets, Banks, and Controlling Systems We recommend that you follow set up of your display system program as below:

Display Information together with Logo or Moving image cycle.

Page 79

Information

Ex) Cycle : Display Information for 1 hour followed by a Display Logo or moving image for 1 minute.

Change the Color Information periodically (Use 2 different colors).

Ex) Rotate the Color Information with 2 colors every 30 minutes.

Avoid using a combination of characters and background color with large difference in luminance.

Avoid using Grey colors, which can cause Image retention easily.

• Avoid: Colors with big difference in luminance (Black & White, Grey)

Ex)

• Recommended settings: Bright colors with little difference in luminance

• Change the characters color and background color every 30 minutes Ex)

• Every 30 minutes, change the characters with movement. Ex)

The best way to protect your monitor from Image retention is to set your PC or System

to operate a Screen Saver program when you are not using it.

Page 80

Information

Image retention may not occur when a LCD panel is operated under normal conditions. Normal conditions are defined as continuously changing video patterns. When the LCD

panel is operated for a long time with a fixed pattern (-over 12 hours-), there may be slight difference in voltage between electrodes that work the liquid crystal (LC) in a pixel. The voltage difference between electrodes increases with time, forcing the liquid crystal to lean. When this occurs, the previous image may be seen when the pattern is changed.

To prevent this, the accumulated voltage difference must be decreased.

Our LCD Monitor satisfies ISO13406-2 Pixel fault Class II

Page 81

Appendix

Contact SAMSUNG WORLDWIDE

Note

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

U.S.A 1-800-SAMSUNG(726-7864) http://www.samsung.com/us CANADA 1-800-SAMSUNG(726-7864) http://www.samsung.com/ca MEXICO 01-800-SAMSUNG(726-7864) http://www.samsung.com/mx

ARGENTINE 0800-333-3733 http://www.samsung.com/ar BRAZIL 0800-124-421

4004-0000 CHILE 800-SAMSUNG(726-7864) http://www.samsung.com/cl COLOMBIA 01-8000112112 http://www.samsung.com/co COSTA RICA 0-800-507-7267 http://www.samsung.com/latin ECUADOR 1-800-10-7267 http://www.samsung.com/latin EL SALVADOR 800-6225 http://www.samsung.com/latin GUATEMALA 1-800-299-0013 http://www.samsung.com/latin HONDURAS 800-7919267 http://www.samsung.com/latin JAMAICA 1-800-234-7267 http://www.samsung.com/latin NICARAGUA 00-1800-5077267 http://www.samsung.com/latin PANAMA 800-7267 http://www.samsung.com/latin PUERTO RICO 1-800-682-3180 http://www.samsung.com/latin REP. DOMINICA 1-800-751-2676 http://www.samsung.com/latin TRINIDAD & TO-

BAGO VENEZUELA 0-800-100-5303 http://www.samsung.com/latin

1-800-SAMSUNG(726-7864) http://www.samsung.com/latin

North America

Latin America

http://www.samsung.com/br

Europe

AUSTRIA 0810-SAMSUNG (7267864, €

0.07/min) BELGIUM 02 201 2418 http://www.samsung.com/be CZECH REPUBLIC 800-SAMSUNG (800 - 726786) http://www.samsung.com/cz

DENMARK 8 - SAMSUNG(7267864) http://www.samsung.com/dk EIRE 0818 717 100 http://www.samsung.com/ie FINLAND 30-6227 515 http://www.samsung.com/fi FRANCE 3260 dites SAMSUNG (€ 0,15/

Min)

http://www.samsung.com/at

http://www.samsung.com/fr

Page 82

Appendix

Europe

0825 08 65 65 (€ 0,15/Min)

GERMANY 01805 - SAMSUNG (7267864, €

0,14/Min) HUNGARY 06-80-SAMSUNG (726-7864) http://www.samsung.com/hu ITALIA 800-SAMSUNG (726-7864) http://www.samsung.com/it LUXEMBURG 02 261 03 710 http://www.samsung.com/lu NETHERLANDS 0900-SAMSUNG (7267864, €

0,10/Min) NORWAY 3 - SAMSUNG(7267864) http://www.samsung.com/no POLAND 0-801-1SAMSUNG (172678)

022-607-93-33 PORTUGAL 808 20-SAMSUNG (7267864) http://www.samsung.com/pt SLOVAKIA 0800-SAMSUNG (726-7864) http://www.samsung.com/sk SPAIN 902 -1-SAMSUNG

(902.172.678) SWEDEN 075 - SAMSUNG(726 78 64) http://www.samsung.com/se SWITZERLAND 0848-SAMSUNG (7267864,

CHF 0,08/Min) U.K 0845 SAMSUNG (7267864) http://www.samsung.com/uk

http://www.samsung.de

http://www.samsung.com/nl

http://www.samsung.com/pl

http://www.samsung.com/es

http://www.samsung.com/ch

CIS

ESTONIA 800-7267 http://www.samsung.ee LATVIA 8000-7267 http://www.samsung.com/lv LITHUANIA 8-800-77777 http://www.samsung.lt KAZAKHSTAN 8-10-800-500-55-500 http://www.samsung.com/kz_ru KYRGYZSTAN 00-800-500-55-500 RUSSIA 8-800-555-55-55 http://www.samsung.ru TADJIKISTAN 8-10-800-500-55-500 UKRAINE 8-800-502-0000 http://www.samsung.ua UZBEKISTAN 8-10-800-500-55-500 http://www.samsung.com/kz_ru

Asia Pacific

AUSTRALIA 1300 362 603 http://www.samsung.com/au CHINA 800-810-5858

400-810-5858

010-6475 1880

HONG KONG:3698 - 4698 http://www.samsung.com/hk INDIA 3030 8282

http://www.samsung.com/cn

http://www.samsung.com/in 1-800-3000-8282 1800 110011

INDONESIA 0800-112-8888 http://www.samsung.com/id JAPAN 0120-327-527 http://www.samsung.com/jp

Page 83

Appendix

Asia Pacific

MALAYSIA 1800-88-9999 http://www.samsung.com/my NEW ZEALAND 0800 SAMSUNG (0800 726

786)

PHILIPPINES 1800-10-SAMSUNG(726-7864) http://www.samsung.com/ph SINGAPORE 1800-SAMSUNG(726-7864) http://www.samsung.com/sg THAILAND 1800-29-3232, 02-689-3232 http://www.samsung.com/th TAIWAN 0800-329-999 http://www.samsung.com/tw VIETNAM 1 800 588 889 http://www.samsung.com/vn

Middle East & Africa

SOUTH AFRICA 0860-SAMSUNG(726-7864) http://www.samsung.com/za TURKEY 444 77 11 http://www.samsung.com/tr U.A.E 800-SAMSUNG(726-7864)

8000-4726

http://www.samsung.com/nz

http://www.samsung.com/ae

Terms

Sync Signal Sync (Synchronized) Signals refer to the standard signals that are

required to display desired colors on the monitor. They are divided into Vertical and Horizontal Sync Signals. These signals display normal color images by the set resolution and frequency.

Types of Sync Signals

Separate

• This is a scheme of transmitting individual vertical and horizontal sync signals to the monitor.

Composite

• This is a scheme of combining vertical and horizontal sync signals into one composite signal and transmitting it to the monitor. The monitor displays the color signals by separating the composite signal into original color signals.

Dot Pitch The image on a monitor is composed of red, green and blue dots.

The closer the dots, the higher the resolution. The distance between two dots of the same color is called the 'Dot Pitch'. Unit: mm

Vertical Frequency The screen must be redrawn several times per second in order to

create and display an image for the user. The frequency of this repetition per second is called the Vertical Frequency or Refresh Rate. Unit: Hz

Example: If the same light repeats itself 60 times per second, this is regarded as 60 Hz.

Horizontal Frequency The time to scan one line connecting the right edge to the left edge

of the screen horizontally is called the Horizontal Cycle. The inverse number of the Horizontal Cycle is called Horizontal Frequency. Unit: kHz

Page 84

Appendix

Interlace and Non-Interlace Methods

Plug & Play This is a function that provides the best quality screen for the user

Resolution The number of horizontal and vertical dots used to compose the

RF Cable A round signal cable generally used for TV antennas.

Satellite Broadcasting Balances the levels of the sound coming from each speaker in

Showing the horizontal lines of the screen from the top to the bottom sequentially is called the Non-Interlace method while showing odd lines and then even lines in turn is called the Interlace method. The Non-Interlace method is used for the majority of monitors to ensure a clear image. The Interlace method is the same as that used in TVs.

by allowing the computer and the monitor to exchange information automatically. This monitor follows the international standard VESA DDC for the Plug & Play function.

screen image is called the 'resolution'. This number shows the accuracy of the display. A high resolution is good for performing multiple tasks as more image information can be shown on the screen.

Example: If the resolution is 1920 x 1200, this means the screen is composed of 1920 horizontal dots (horizontal resolution) and 1200 vertical lines (vertical resolution).

televisions with two speakers.

Cable TV Whereas the terrestrial broadcasting is delivered via frequency

signals through the air, cable broadcasting is transmitted via a cable network. In order to view cable TV, one must purchase a cable receiver and hook it up to the cable network.

CATV "CATV" refers to the broadcasting service offered at hotels,

schools and other buildings through their own broadcasting system, apart from VHF or UHF broadcasting by terrestrial broadcasters. The CATV programs may include movies, entertainment and educational programs. (Different from cable TV.)

CATV can be viewed only within the area in which the CATV service is offered.

VHF/UHF VHF indicates TV channels 2 to 13, and UHF indicates channels

14 through 69.

Channel Fine Tuning This feature allows the viewer to fine-tune the TV channel to ob-

tain the best viewing conditions. The Samsung LCD TV has both automatic and manual channel fine-tuning features to enable the viewer to adjust their desired settings.

External Device Input External device input refers to video input from such external vid-

eo devices as VCRs, camcorders and DVD players, separate from a TV broadcast.

DVD A type of digital disk technology that takes up only the benefits

of CD and LD, to implement a high resolution/quality, which enables the user to enjoy clearer images.

DTV Broadcasting (Digital TV Broadcasting)

An enhanced broadcasting technology to process digital video signals using a set-top box, which implements a high resolution and clearer digital images on the screen.

Page 85

Appendix

LNA (Low Noise Amplifier) This derives from artificial satellite technology that amplifies

weak signals even in poor reception areas for sharper images.

Antenna Converter A connection part that is used to link a Wide antenna cable (feeder

cable) to the TV.

English Caption (= Caption Setting)

Multiplex Broadcasting This enables the user to enjoy the broadcasting service in both

A2 This system uses two carriers to transmit voice data. Countries

BTSC Broadcast Television System CommitteeThe stereo broadcasting

EIAJ Electronic Industries Association of Japan. DVI DVI is the acronym for Digital Video Interface. It is a new type

HDMI(High Definition Multimedia Interface)

A kind of language selection feature that provides English subtitles (caption) or character information services from broadcasting services (ex: AFKN) or video tapes (marked CC), and which are especially useful for studying English.

Korean and foreign (original) language as well as in stereo mode.

such as South Korea and Germany use this system.

system that is used in most of the countries that have adopted the NTSC system, including the United States, Canada, Chile, Venezuela and Taiwan. It also refers to the organization that has been organized to promote its development and management.

of video interface technology that provides the maximum screen quality for high quality display devices and high-end graphics cards including flat panel LCD monitors.

This is an interface that connects both quality video signals and digital audio signals with a cable without any compression.

Authority

• HD (High Definition) In HD, 1080-line, 2x density beaming (1080i) is used. HD

provides a five times clearer screen quality than the existing analog method and has a wide 16:9 aspect ratio.

• SD (Standard Definition) In SD, 480-line, double beaming (480i) is used. SD provides

a screen quality somewhere between HD and the existing analog method. It exhibits a two times better screen quality than analog TV.

Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden.

Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation; VESA, DPM and DDC are registered trademarks of Video Electronics Standard Association; the ENERGY STAR® name and logo are reg-

Page 86

Appendix

istered trademarks of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR Partner, Samsung Electronics Co., Ltd. has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. All other product names mentioned herein may be the trademarks or registered trademarks of their respective owners.

Samsung LS23CFUKFV-ZA User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

LCD Monitor

Safety Instructions

Notational

Power

Installation

Clean

Others

Introduction

Package Contents

Unpacking

Rear

Remote Control

Connections

Connecting to a Macintosh

Connecting to Other devices

Connecting TV

Connecting DVD / Set Top Box

Connecting HDMI

Connecting and Using an Amplifier

Connecting Headphone

Attaching a Base

Using the Software

Monitor Driver

Installing the Monitor Driver (Automatic)

Installing the Monitor Driver (Manual)

How to install the Natural Color software

How to delete the Natural Color software program

MultiScreen

Installation

Installation Problems

System Requirements

Uninstall

Adjusting the LCD Display

Picture

MagicBright is a feature providing optimum viewing environment depending on the contents of the image you are watching. Currently five different modes are available: Entertain, Internet, Text, Dynamic Contrast and Custom. Each mode has its own pre-configured brightness value.

Contrast / Brightness / Sharpness

Auto Adjustment

Screen

- Coarse / Fine

- Position

- Image Reset

- Resolution

Picture Options

- Color Tone

- R-Gain / G-Gain / B-Gain

- Size

Reset

Backlight / Contrast / Brightness / Sharpness / Color / Tint

Picture Options

- Color Tone

- Size

- Digital NR

- HDMI Black Level

- Film Mode

Reset

Sound

Mode

Equalizer

Multi-Track Sound

Auto Volume

TV Speaker

Channel

Antenna

Auto Program

Clear Scrambled Channel

Channel List

Added

Favorite

Name

Fine Tune

Signal Strength

Setup

Plug & Play

Language

- Clock Mode

- Clock Set