Samsung LS22E45KMSV/EN User Manual

User manual
S19E200BR S19E200BW S19E200NW S19E200NY S19E450BR S19E450BW S19E450MR S19E450MW S22E200B S22E200BW S22E200N S22E200NY S22E450B S22E450BW S22E450D S22E450DW S22E450M S22E450MW S23E200B S23E450B S24E200BL S24E450B S24E450BL S24E450D S24E450DL S24E450M S24E650BW S27E450B S27E450D
The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
BN46-00478A-01

Table Of Contents

BEFORE USING THE
PRODUCT
PREPARATIONS 20 Checking the Components
8 Copyright
8 Icons used in this manual
9 Cleaning
10 Securing the Installation Space
10 Precautions for storage
11 Safety Precautions
11 Symbols 12 Electricity and Safety 13 Installation and Safety 15 Operation and Safety
19 Correct posture to use the product
20 Checking the Components
22 Parts
22 Frontal Buttons (SE200 Series) 24 Frontal Buttons (S**E450B*, S**E650B*) 26 Frontal Buttons (S**E450M*) 28 Frontal Buttons (S**E450D*) 30 Reverse Side (SE200 Series) 31 Reverse Side (S**E450B*, S**E650B*) 32 Reverse Side (S**E450M*) 33 Reverse Side ( S**E450D*) 34 Right Side View (S**E450D*)
35 Installation
35 Attaching the Stand (SE200 Series) 36 Attaching the Stand (SE450, SE650 Series) 37 Removing the Stand (SE200 Series) 38 Adjusting the Product Tilt (SE200 Series) 39 Adjusting the Product Tilt and Height (SE450,
SE650 Series) 40 Rotating the Monitor (SE450, SE650 Series) 41 Installing a Wall-mount Kit or Desktop Stand 44 Anti-theft Lock
Table Of Contents
2
Table Of Contents
CONNECTING AND USING
A SOURCE DEVICE
SCREEN SETUP 56 Brightness
45 Before Connecting
45 Pre-connection Checkpoints
46 Connecting and Using a PC
46 Connecting to a PC 50 Connecting the Power 54 Driver Installation 55 Setting Optimum Resolution
56 Configuring Brightness
57 Contrast
57 Configuring Contrast
58 Sharpness
58 Configuring Sharpness
59 Eye Saver Mode
59 Configuring Eye Saver Mode
60 Game Mode
60 Configuring Game Mode
61 SAMSUNG MAGIC Bright
61 Configuring SAMSUNG MAGIC Bright
62 SAMSUNG MAGIC Angle (Except
S19E200NY / S22E200NY)
62 Configuring SAMSUNG MAGIC Angle
64 SAMSUNG MAGIC Upscale
64 Configuring SAMSUNG MAGIC Upscale
65 Image Size (Except S19E200BR /
S19E450BR / S19E450MR)
65 Changing the Image Size
67 H-Position & V-Position
67 Configuring H-Position & V-Position
Table Of Contents
3
Table Of Contents
68 Coarse
68 Adjusting Coarse
69 Fine
69 Adjusting Fine
CONFIGURING TINT 70 Red
70 Configuring Red
71 Green
71 Configuring Green
72 Blue
RESIZING OR
RELOCATING THE
SCREEN
72 Configuring Blue
73 Color Tone
73 Configuring the Color Tone Settings
74 Gamma
74 Configuring Gamma
75 Language
75 Changing the Language
76 Menu H-Position & Menu V-Position
76 Configuring Menu H-Position & Menu V-
Position
77 Display Time
77 Configuring Display Time
78 Transparency
78 Changing Transparency
SETUP AND RESET 79 Reset All
79 Initializing Settings (Reset All)
80 Smart Eco Saving
80 Configuring Smart Eco Saving
Table Of Contents
4
Table Of Contents
81 Off Timer (S19E200NW / S19E200NY /
S22E200N /S22E200NY)
81 Configuring Off Timer 82 Configuring Turn Off After
83 Off Timer Plus (Except S19E200NW /
S19E200NY / S22E200N / S22E200NY)
83 Configuring Off Timer 85 Configuring Eco Timer
87 PC/AV Mode (Except S19E200NW /
S19E200NY / S22E200N / S22E200NY)
87 Configuring PC/AV Mode
INFORMATION MENU AND
OTHERS
INSTALLING THE
SOFTWARE
88 Key Repeat Time
88 Configuring Key Repeat Time
89 Source Detection (Except S19E200NW /
S19E200NY / S22E200N / S22E200NY)
89 Configuring Source Detection
90 INFORMATION
90 Displaying INFORMATION
91 Configuring Brightness, Contrast and
Sharpness from the Initial Screen
92 Configuring Volume in the Initial Screen
93 MultiScreen
93 Installing the Software 94 Removing the Software
TROUBLESHOOTING
GUIDE
95 Requirements Before Contacting
Samsung Customer Service Center
95 Testing the Product 95 Checking the Resolution and Frequency 95 Check the following.
98 Q & A
Table Of Contents
5
Table Of Contents
SPECIFICATIONS
100 General (S19E200NY / S19E200NW)
102 General (S19E200BW / S19E200BR)
104 General (S22E200NY)
105 General (S22E200B / S22E200N /
S22E200BW)
107 General (S23E200B / S24E200BL)
109 General (S19E450BW / S19E450MW /
S19E450BR / S19E450MR)
111 General (S22E450B / S22E450M /
S22E450D)
113 General (S22E450BW / S22E450MW /
S22E450DW)
115 General (S23E450B)
117 General (S24E450BL / S24E450DL)
119 General (S24E450B / S24E450M /
S24E450D)
121 General (S24E650BW)
123 General (S27E450B / S27E450D)
125 PowerSaver
129 Standard Signal Mode Table
APPENDIX 137 Responsibility for the Pay Service (Cost
to Customers)
137 Not a product defect 137 A Product damage caused by customer's fault 137 Others
139 Correct Disposal
139 Correct Disposal of This Product (Waste
Electrical & Electronic Equipment)
139 Extended warranty
Table Of Contents
6
Table Of Contents
140 Terminology
INDEX
Table Of Contents
7

Copyright

The contents of this manual are subject to change without notice to improve quality.
© 2015 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.

Before Using the Product

An administration fee may be charged if either
(a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
(b) you bring the unit to a repair center and there is no defect in the product
(i.e. where you have failed to read this user manual).
The amount of such administration charge will be advised to you before any work or home visit is
carried out.

Icons used in this manual

The following images are for reference only. Real-life situations may differ from what is shown in the images.
Before Using the Product
8

Cleaning

!
Before Using the Product
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
1. Power off the monitor and computer.
2. Disconnect the power cord from the monitor.
Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result.
3. Wipe the monitor screen using a clean, soft and dry cloth.
Do not apply a cleaning agent that contains alcohol,
solvent, or surfactant to the monitor.
!
Do not spray water or detergent directly on the product.
4. Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the monitor.
5. Connect the power cord to the product after cleaning the product.
6. Power on the monitor and computer.
Before Using the Product
9
Before Using the Product
3.93 inches (10 cm)
3.93 inches (10 cm)
3.93 inches (10 cm)
3.93 inches (10 cm)
3.93 inches (10 cm)
3.93 inches (10 cm)
3.93 inches (10 cm)
3.93 inches (10 cm)
3.93 inches (10 cm)
3.93 inches (10 cm)

Securing the Installation Space

Ensure some space around the product for ventilation. An internal temperature rise may cause fire
and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product.
The exterior may differ depending on the product.
SE200 Series
SE450, SE650 Series

Precautions for storage

Be sure to contact Samsung Customer Service Center if the inside of the monitor needs cleaning. (A service fee will be charged.)
Before Using the Product
10
Before Using the Product

Safety Precautions

Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
QUALIFIED PERSONNEL.

Symbols

Warning
Caution
A serious or fatal injury may result if instructions are not followed.
Personal injury or damage to properties may result if instructions are not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
Before Using the Product
11
Before Using the Product
!
!
!

Electricity and Safety

The following images are for reference only. Real-life situations may differ from what is shown in the images.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
An electric shock or fire may result.
Do not plug many products into the same power socket.
Otherwise, the socket may overheat and cause a fire.
Do not touch the power plug with wet hands.
Otherwise, an electric shock may result.
Insert the power plug all the way in so it is not loose.
An unstable connection may cause a fire.
Ensure you connect the power plug to a grounded power socket. (type 1 insulated devices only).
An electric shock or injury may result.
Do not bend or pull the power cord with force. Do not weigh the power cord down with a heavy object.
A damaged power cord may cause an electric shock or fire.
Do not place the power cord or product near heat sources.
An electric shock or fire may result.
Remove foreign substances such as dust around the plug pins and power socket with a dry cloth.
Otherwise, a fire may result.
Before Using the Product
12
Before Using the Product
!
!
!
!
Caution
Do not unplug the power cord when the product is in use.
The product may become damaged by an electric shock.
Do not use the power cord for products other than authorized products supplied by Samsung.
An electric shock or fire may result.
Keep the power socket where the power cord is connected unobstructed.
If any problem occurs in the product, unplug the power cable to completely
cut the power to the product.
Power to the product cannot be completely cut off with the power button.
Hold the plug when disconnecting the power cord from the power socket.
An electric shock or fire may result.

Installation and Safety

Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
Otherwise, a fire may result.
Avoid installing the product in a narrow space with bad ventilation, such as a bookshelf or wall closet.
Otherwise, a fire may result due to an increased internal temperature.
Keep the plastic packaging bag for the product in a place that cannot be reached by children.
Children may suffocate.
Before Using the Product
13
Before Using the Product
!
!
Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.).
The product may fall and break or cause a personal injury.
Using the product in an area with excess vibration may damage the product
or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke.
An electric shock or fire may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a stove.
Otherwise, the product lifespan may be reduced, or a fire may result.
Caution
Do not install the product within the reach of young children.
The product may fall and injure children.
Edible oil, such as soybean oil, can damage or deform the product. Do not install the product in a kitchen or near a kitchen counter.
Take care not to drop the product when moving it.
Otherwise, product failure or personal injury may result.
Do not set down the product on its front.
The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding.
The product may fall and break or cause a personal injury.
Install the product only on cabinets or shelves of the right size.
Before Using the Product
14
Before Using the Product
!
SAMSUNG
!
!
!
Put down the product carefully.
The product may fall and break or cause a personal injury.
Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical substances, extreme temperatures or a significant presence of moisture, or a place where the product will operate continuously for an extended period of time) may seriously affect its performance.
Be sure to consult Samsung Customer Service Center before installation if
you want to install the product at such a place.

Operation and Safety

Warning
High voltage runs through the product. Do not attempt to disassemble, repair, or modify the product on your own.
An electric shock or fire may result.
Contact Samsung Customer Service Center for repair.
To move the product, first disconnect all the cables from it, including the power cable.
Otherwise, the power cord may be damaged and a fire or electric shock may
result.
If the product generates a strange noise, a burning smell, or smoke, remove the power cord immediately and contact Samsung Customer Service Center.
An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
The product may fall, and your child may become injured or seriously
harmed.
If the product falls or the exterior is damaged, power off the product, remove the power cord, and contact Samsung Customer Service Center.
Otherwise, an electric shock or fire may result.
Do not put a heavy object, toy, or sweets on top of the product.
The product or heavy objects may fall as children try to reach for the toy or
sweets resulting in a serious injury.
Before Using the Product
15
Before Using the Product
!
!
!
GAS
!
100
If there is a thunderstorm or lightning strike, turn off the power and disconnect the power cable.
An electric shock or fire may result.
Do not drop objects on the product or apply impact.
An electric shock or fire may result.
Do not move the product by pulling the power cord or any cable.
Otherwise, the cable may be damaged and product failure, an electric shock
or fire may result.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area immediately.
Sparks can cause an explosion or fire.
Do not lift or move the product by pulling the power cord or any cable.
Otherwise, the cable may be damaged and product failure, an electric shock
or fire may result.
Do not use or keep combustible spray or an inflammable substance near the product.
An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
Otherwise, a fire may result from an increased internal temperature.
Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable object (paper, match, etc.) into the vent or ports of the product.
If water or any foreign substance enters the product, be sure to power off the
product, remove the power cord, and contact Samsung Customer Service Center.
Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.
If water or any foreign substance enters the product, be sure to power off the
product, remove the power cord, and contact Samsung Customer Service Center.
Product failure, an electric shock or fire may result.
Before Using the Product
16
Before Using the Product
!
-_-
!
!
!
Caution
Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.
If you are not going to use the product for an extended period of time,
activate power-saving mode or a moving-picture screen saver.
Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc.).
Otherwise, a fire may result from accumulated dust, overheating, an electric
shock, or electric leakage.
Use the product at the recommended resolution and frequency.
Otherwise,Your eyesight may deteriorate.
Do not put DC power adapters together.
Otherwise, a fire may result.
Remove the plastic bag from the DC power adapter before you use it.
Otherwise, a fire may result.
Do not let water enter the DC power device or get the device wet.
An electric shock or fire may result.
Avoid using the product outdoors where it can be exposed to rain or snow.
Be careful not to get the DC power adapter wet when you wash the floor.
Do not put the DC power adapter near to any heating apparatus.
Otherwise, a fire may result.
Keep the DC power adapter in a well-ventilated area.
!
Looking at the screen too close for an extended period of time can deteriorate your eyesight.
Before Using the Product
17
Before Using the Product
!
!
!
Do not hold the monitor upside-down or move it by holding the stand.
The product may fall and break or cause a personal injury.
Do not use humidifiers or stoves around the product.
An electric shock or fire may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
Eye fatigue will be relieved.
Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
Store the small accessories used with the product out of reach of children.
Exercise caution when adjusting the product angle or stand height.
Otherwise, children's fingers or hands may become stuck and injured.
Tilting the product excessively may cause it to fall and result in personal
injury.
Do not place heavy objects on the product.
Product failure or personal injure may result.
When using headphones or earphones, do not turn the volume too high.
Having the sound too loud may damage your hearing.
Before Using the Product
18
Before Using the Product

Correct posture to use the product

Use the product in the correct posture as follows:
Straighten your back.
Allow a distance of 45 to 50 cm between your eye and the screen, and look slightly
downward at the screen.
Keep your eyes directly in front of the screen.
Adjust the angle so light does not reflect on the screen.
Keep your forearms perpendicular to your upper arms and level with the back of
your hands.
Keep your elbows at about a right angle.
Adjust the height of the product so you can keep your knees bent at 90 degrees or
more, your heels attached to the floor, and your arms lower than your heart.
Before Using the Product
19

Preparations

1

1.1 Checking the Components

1.1.1 Checking the Components

Contact the dealer from whom you purchased the product if any item is missing.
The pictures may look different from the actual components.
Components
Quick setup guide
User manual
(optional)
DVI cable
(optional)
Warranty card (Not available in
some locations)
Power cable
HDMI-DVI cable
(optional)
Regulatory guide
(optional)
D-SUB cable
(optional)
DP cable
For S**E450D* Model
(optional)
Stereo Cable
For S**E450M* Model
(optional)
USB cable
For S**E450D* Model
(optional)
Stand base
For SE200 Series Model
(optional)
1 Preparations
20
1
Preparations
Stand base
For SE450 Series Model,
For S**E650B* Model
(optional)
Stand neck
For SE450 Series Model,
For S**E650B* Model
(optional)
Components may vary depending on the country.
(Applicable to the stand models
that have USB ports only.)
Stand base
For S**E450D* Model
(optional)
Stand neck
For SE200 Series Model
(optional)
1 Preparations
21
Preparations
Key Guide
EYE
SAVERMENU SOURCE
AUTO
EYE SAVERMENU SOURCE
AUTO
MENU
MENU
M
SAMSUNG
MAGIC
SAMSUNG
MAGIC
1

1.2 Parts

1.2.1 Frontal Buttons (SE200 Series)

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Icons Description
Open or close the onscreen display (OSD) menu, or return to the parent menu.
OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings. Enable: To lock the OSD control, press the [ ] button for 10 seconds. Disable: To unlock the locked OSD control, press the [ ] button for more than 10 seconds.
ENU
If the OSD control is locked,
Brightness
available.
The button. (The
and
Contrast
INFORMATION
Eye Saver Mode
Eye Saver Mode
can be adjusted. can be viewed.
function can be used by pressing the [ ]
is available even when the OSD
control is locked.)
Press [ ] to enable or disable
The items below are not available if the
PICTURE
COLOR
Brightness, Game Mode
Eye Saver Mode
Eye Saver Mode
Eye Saver Mode
is
.
function is enable.
,
Bright
,
Angle
SETUP&RESET
Move to the upper or lower menu or adjust the value for an option on the OSD menu.
Smart Eco Saving
1 Preparations
22
1
AUTO
Preparations
Icons Description
Use this button to control the brightness, contrast and sharpness of the screen.
Confirm a menu selection.
Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/DVI). If you power on the product or
change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.
This function is not available for products with an Analog interface only.
Key Guide
Press the [ ] button to automatically adjust the screen settings.
Turn the screen on or off.
When a control button on the product is pressed, the Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)
To access the onscreen menu when the guide is displayed, press the corresponding button again.
The Key Guide may vary depending on the function or product model. Refer to the actual product.
AUTO
Changing the resolution in Display Properties will activate the
Auto Adjustment function.
This function is only available in Analog mode.
1 Preparations
23
1
Key Guide
EYE
SAVERMENU SOURCE
AUTO
MENU
MENU
M
SAMSUNG
MAGIC
SAMSUNG
MAGIC
Preparations

1.2.2 Frontal Buttons (S**E450B*, S**E650B*)

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Icons Description
Open or close the onscreen display (OSD) menu, or return to the parent menu.
OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings. Enable: To lock the OSD control, press the [ ] button for 10 seconds. Disable: To unlock the locked OSD control, press the [ ] button for more than 10 seconds.
If the OSD control is locked,
Brightness
available.
The button. (The control is locked.)
and
Contrast
INFORMATION
Eye Saver Mode
Eye Saver Mode
Press [ ] to enable or disable
The items below are not available if the
PICTURE
COLOR
Brightness, Game Mode
ENU
can be adjusted. can be viewed.
function can be used by pressing the [ ]
is available even when the OSD
Eye Saver Mode
Eye Saver Mode
Eye Saver Mode
is
.
function is enable.
,
Bright
,
Angle
SETUP&RESET
Smart Eco Saving
Move to the upper or lower menu or adjust the value for an option on the OSD menu.
Use this button to control the brightness, contrast and sharpness of the screen.
1 Preparations
24
1
AUTO
Preparations
Icons Description
Confirm a menu selection.
Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/DVI). If you power on the product or
change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.
This function is not available for products with an Analog interface only.
Key Guide
Press the [ ] button to automatically adjust the screen settings.
Turn the screen on or off.
When a control button on the product is pressed, the Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)
To access the onscreen menu when the guide is displayed, press the corresponding button again.
The Key Guide may vary depending on the function or product model. Refer to the actual product.
AUTO
Changing the resolution in Display Properties will activate the
Auto Adjustment function.
This function is only available in Analog mode.
1 Preparations
25
1
Key Guide
EYE
SAVERMENU SOURCE
AUTO
EYE
SAVERMENU SOURCE
AUTO
MENU
MENU
M
SAMSUNG
MAGIC
SAMSUNG
MAGIC
Preparations

1.2.3 Frontal Buttons (S**E450M*)

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Icons Description
Open or close the onscreen display (OSD) menu, or return to the parent menu.
OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings. Enable: To lock the OSD control, press the [ ] button for 10 seconds. Disable: To unlock the locked OSD control, press the [ ] button for more than 10 seconds.
ENU
If the OSD control is locked,
Brightness
available.
The button. (The
Eye Saver Mode
and
Contrast
INFORMATION
function can be used by pressing the [ ]
Eye Saver Mode
can be adjusted. can be viewed.
is available even when the OSD control
is locked.)
Press [ ] to enable or disable
The items below are not available if the
PICTURE
COLOR
Brightness, Game Mode
Eye Saver Mode
Eye Saver Mode
Eye Saver Mode
is
.
function is enable.
,
Bright
,
Angle
SETUP&RESET
Smart Eco Saving
Move to the upper or lower menu or adjust the value for an option on the OSD menu.
Use this button to control the brightness and contrast of the screen.
Volume can be adjusted if a cable is connected to the [IN] port.
1 Preparations
26
1
AUTO
AUTO
Preparations
Icons Description
Confirm a menu selection.
Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/DVI). If you power on the product or
change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.
This function is not available for products with an Analog interface only.
Press the [ ] button to automatically adjust the screen settings.
Changing the resolution in Display Properties will activate the
Auto Adjustment function.
Key Guide
This function is only available in Analog mode.
Turn the screen on or off.
When a control button on the product is pressed, the Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)
To access the onscreen menu when the guide is displayed, press the corresponding button again.
The Key Guide may vary depending on the function or product model. Refer to the actual product.
1 Preparations
27
1
Key Guide
EYE
SAVERMENU SOURCE
AUTO
MENU
MENU
M
SAMSUNG
MAGIC
SAMSUNG
MAGIC
Preparations

1.2.4 Frontal Buttons (S**E450D*)

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Icons Description
Open or close the onscreen display (OSD) menu, or return to the parent menu.
OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings. Enable: To lock the OSD control, press the [ ] button for 10 seconds. Disable: To unlock the locked OSD control, press the [ ] button for more than 10 seconds.
If the OSD control is locked,
Brightness
available.
The button. (The is locked.)
Eye Saver Mode
and
Contrast
INFORMATION
Eye Saver Mode
Press [ ] to enable or disable
The items below are not available if the
PICTURE
COLOR
Brightness, Game Mode
ENU
can be adjusted. can be viewed.
function can be used by pressing the [ ]
is available even when the OSD control
Eye Saver Mode
Eye Saver Mode
Eye Saver Mode
is
.
function is enable.
,
Bright
,
Angle
SETUP&RESET
Smart Eco Saving
Move to the upper or lower menu or adjust the value for an option on the OSD menu.
Use this button to control the brightness, contrast and sharpness of the screen.
1 Preparations
28
1
AUTO
AUTO
Preparations
Icons Description
Confirm a menu selection.
Pressing the [ ] button when the OSD menu is not displayed will change the input source (
change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.
This function is not available for products with an Analog interface only.
Press the [ ] button to automatically adjust the screen settings.
Analog/DVI/DisplayPort
Changing the resolution in Display Properties will activate the
Adjustment
function.
). If you power on the product or
Auto
Key Guide
This function is only available in
Turn the screen on or off.
When a control button on the product is pressed, the Key Guide will be displayed before the onscreen menu opens. (The guide shows the function of the button pressed.)
To access the onscreen menu when the guide is displayed, press the corresponding button again.
The Key Guide may vary depending on the function or product model.
Refer to the actual product.
Analog
mode.
1 Preparations
29
1
DVI IN RGB IN
POWER IN
POWER IN
RGB INDVI IN
PO
Preparations

1.2.5 Reverse Side (SE200 Series)

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
RGB IN
WER IN
Port Description
Connect to a PC using the DVI cable.
The [DVI IN] terminal is supplied for the digital (DVI)-dedicated models only.
Connect to a PC using the D-SUB cable.
Connect to an external device.
Connect the power cord for your monitor to the [POWER IN] port on the back of the product.
1 Preparations
30
Loading...
+ 113 hidden pages