User manual
S22E360H
S22E390H
S24E360HL
S24E390HL
S27E360H
S27E390H
S27E360F
The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
BN46-00384A-00
BEFORE USING THE PRODUCT
PREPARATIONS
CONNECTING AND USING A SOURCE DEVICE
SCREEN SETUP
6Copyright
6Icons used in this manual
7Cleaning
8Securing the Installation Space
8Precautions for storage
9Safety Precautions
9Symbols
10Electricity and Safety
11Installation and Safety
13Operation and Safety
17Correct posture to use the product
18Checking the Contents
18 Checking the Components
19 Parts
19 Frontal Buttons
21 Reverse Side
22 Installation
22Attaching the Stand
23Removing the Stand
24Adjusting the Product Tilt
25Anti-theft Lock
26 Before Connecting
26 Pre-connection Checkpoints
26 Connecting and Using a PC
26 Connecting to a PC
28Connecting the Power
29Driver Installation
30Setting Optimum Resolution
31 Brightness
31 Configuring Brightness
Table Of Contents |
2 |
|
|
|
|
|
|
|
Table Of Contents
32
32
33
33
34
34
35
35
37
37
39
39
40
40
42
42
43
43
44
44
46
46
47
47
CONFIGURING TINT 48
48
49
49
Contrast
Configuring Contrast
Sharpness
Configuring Sharpness
Game Mode
Configuring Game Mode
SAMSUNG MAGIC Bright
Configuring SAMSUNG MAGIC Bright
SAMSUNG MAGIC Angle
(S22E360H / S22E391H)
Configuring SAMSUNG MAGIC Angle
SAMSUNG MAGIC Upscale
Configuring SAMSUNG MAGIC Upscale
Image Size
Changing the Image Size
HDMI Black Level
Configuring the HDMI Black Level Settings
Response Time (S24E360HL /
S24E391HL / S27E 360H / S27E391H)
Configuring the Response Time
H-Position & V-Position
Configuring H-Position & V-Position
Coarse
Adjusting Coarse
Fine
Adjusting Fine
Red
Configuring Red
Green
Configuring Green
Table Of Contents |
3 |
|
|
|
|
|
|
|
Table Of Contents
COORDINATING OSD
SETUP AND RESET
50 Blue
50 Configuring Blue
51 Color Tone
51 Configuring the Color Tone Settings
52 Gamma
52 Configuring Gamma
53 Language
53 Configuring Language
54 Menu H-Position & Menu V-Position
54Configuring Menu H-Position & Menu V-Position
55 Display Time
55 Configuring Display Time
56 Transparency
56 Changing Transparency
57 Reset All
57 Initializing Settings (Reset All)
58 Eco Saving
58 Configuring Eco Saving
59 Off Timer
59Configuring Off Timer
60Configuring Turn Off After
61 PC/AV Mode
61 Configuring PC/AV Mode
62 Key Repeat Time
62 Configuring Key Repeat Time
63 Source Detection
63 Configuring Source Detection
Table Of Contents |
4 |
|
|
|
|
|
|
|
Table Of Contents
INFORMATION MENU AND OTHERS
INSTALLING THE
SOFTWARE
TROUBLESHOOTING GUIDE
SPECIFICATIONS
APPENDIX
64 INFORMATION
64 Displaying INFORMATION
65Configuring Brightness and Contrast in the Initial Screen
66Easy Setting Box
66Installing the Software
67Removing the Software
68Requirements Before Contacting Samsung Customer Service Center
68 Testing the Product
68 Checking the Resolution and Frequency
68 Check the following.
71 |
Q & A |
73 General
75PowerSaver
76Standard Signal Mode Table
78 Contact SAMSUNG WORLD WIDE
84Responsibility for the Pay Service (Cost to Customers)
84 Not a product defect
84 A Product damage caused by customer's fault
84 Others
86 Correct Disposal
86Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
87 Terminology
INDEX
Table Of Contents |
5 |
|
|
|
|
|
|
|
The contents of this manual are subject to change without notice to improve quality.
© 2014 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
An administration fee may be charged if either
(a) an engineer is called out at your request and there is no defect in the product (i.e. where you have failed to read this user manual).
(b) you bring the unit to a repair centre and there is no defect in the product (i.e. where you have failed to read this user manual).
The amount of such administration charge will be advised to you before any work or home visit is carried out.
The following images are for reference only. Real-life situations may differ from what is shown in the images.
Before Using the Product |
6 |
|
|
|
|
|
|
|
Before Using the Product
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
1. Power off the monitor and computer.
2. Disconnect the power cable from the monitor.
Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
3. Wipe the monitor screen using a clean, soft and dry cloth.
Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor.
!
Do not spray water or detergent directly on the product.
4.Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the monitor.
5. Connect the power cable to the product after cleaning the product. 6. Power on the monitor and computer.
!
Before Using the Product |
7 |
|
|
|
|
|
|
|
Before Using the Product
Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown below or greater when installing the product.
The exterior may differ depending on the product.
|
3.93inches (10 cm) |
|
3.93inches (10 cm) |
3.93 |
3.93 |
inches |
inches |
(10 cm) |
(10 cm) |
|
3.93 |
|
inches |
|
(10 cm) |
Be sure to contact Samsung Customer Service Center (page 78) if the inside of the monitor needs
cleaning. (A service fee will be charged.)
Before Using the Product |
8 |
|
|
|
|
|
|
|
Before Using the Product
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
|
|
Warning |
A serious or fatal injury may result if instructions are not followed. |
|
|
|
|
|
|
|
|
|
|
Caution |
Personal injury or damage to properties may result if instructions are |
|
|
not followed. |
|
|
|
|
|
|
|
|
|
|
|
|
Activities marked by this symbol are prohibited. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Instructions marked by this symbol must be followed. |
|
|
|
|
Before Using the Product |
9 |
|
|
|
|
|
|
|
Before Using the Product
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Warning
Do not use a damaged power cable or plug, or a loose power socket.
An electric shock or fire may result.
Do not plug many products into the same power socket.
Otherwise, the socket may overheat and cause a fire.
Do not touch the power plug with wet hands.
Otherwise, an electric shock may result.
Insert the power plug all the way in so it is not loose.
An unstable connection may cause a fire.
!
!
!
Ensure you connect the power plug to a grounded power socket (type 1 insulated devices only).
An electric shock or injury may result.
Do not bend or pull the power cable with force. Do not weigh the power cable down with a heavy object.
A damaged power cable may cause an electric shock or fire.
Do not place the power cable or product near heat sources.
An electric shock or fire may result.
Remove foreign substances such as dust around the plug pins and power socket with a dry cloth.
Otherwise, a fire may result.
Before Using the Product 10
Before Using the Product
Caution
|
Do not unplug the power cable when the product is in use. |
|
The product may become damaged by an electric shock. |
|
Do not use the power cable for products other than authorized products supplied |
|
by Samsung. |
! |
An electric shock or fire may result. |
|
|
|
Keep the power socket where the power cable is connected unobstructed. |
|
If any problem occurs in the product, unplug the power cable to completely |
! |
cut the power to the product. |
|
|
|
Power to the product cannot be completely cut off with the power button. |
|
Hold the plug when disconnecting the power cable from the power socket. |
An electric shock or fire may result.
!
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
Otherwise, a fire may result.
Avoid installing the product in a narrow space with bad ventilation, such as a bookshelf or wall closet.
Otherwise, a fire may result due to an increased internal temperature.
Keep the plastic packaging bag for the product in a place that cannot be reached by children.
! |
Children may suffocate. |
Before Using the Product 11
Before Using the Product
! |
Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.).
The product may fall and break or cause a personal injury.
Using the product in an area with excess vibration may damage the product or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke.
An electric shock or fire may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a stove.
Otherwise, the product lifespan may be reduced, or a fire may result.
Do not install the product within the reach of young children.
The product may fall and injure children.
Edible oil, such as soybean oil, can damage or deform the product. Do not install the product in a kitchen or near a kitchen counter.
Caution
Take care not to drop the product when moving it.
Otherwise, product failure or personal injury may result.
!
Do not set down the product on its front.
The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding.
The product may fall and break or cause a personal injury.
Install the product only on cabinets or shelves of the right size.
Before Using the Product 12
Before Using the Product
Put down the product carefully.
The product may fall and break or cause a personal injury.
!
SAMSUNG
!
Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical substances, extreme temperatures or a significant presence of moisture, or a place where the product will operate continuously for an extended period of time) may seriously affect its performance.
Be sure to consult Samsung Customer Service Center (page 78) before installation if you want to install the product at such a place.
Warning
!
!
High voltage runs through the product. Do not attempt to disassemble, repair, or modify the product on your own.
An electric shock or fire may result.
Contact Samsung Customer Service Center (page 78) for repair.
Before moving the product, turn off the power switch and disconnect the power cable and all other connected cables.
Otherwise, the power cable may be damaged and a fire or electric shock may result.
If the product generates a strange noise, a burning smell, or smoke, remove the power cable immediately and contact Samsung Customer Service Center (page 78).
An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
The product may fall, and your child may become injured or seriously harmed.
If the product falls or the exterior is damaged, power off the product, remove the power cable, and contact Samsung Customer Service Center (page 78).
Otherwise, an electric shock or fire may result.
Do not put a heavy object, toy, or sweets on top of the product.
The product or heavy objects may fall as children try to reach for the toy or sweets resulting in a serious injury.
Before Using the Product 13
Before Using the Product
If there is a thunderstorm or lightning strike, turn off the power and disconnect the power cable.
! |
An electric shock or fire may result. |
Do not drop objects on the product or apply impact.
An electric shock or fire may result.
!
!
!
GAS
100
Do not move the product by pulling the power cable or any cable.
Otherwise, the cable may be damaged and product failure, an electric shock or fire may result.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area immediately.
Sparks can cause an explosion or fire.
Do not lift or move the product by pulling the power cable or any cable.
Otherwise, the cable may be damaged and product failure, an electric shock or fire may result.
Do not use or keep combustible spray or an inflammable substance near the product.
An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
Otherwise, a fire may result from an increased internal temperature.
Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable object (paper, match, etc.) into the vent or ports of the product.
If water or any foreign substance enters the product, be sure to power off the product, remove the power cable, and contact Samsung Customer Service Center (page 78).
Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.
If water or any foreign substance enters the product, be sure to power off the product, remove the power cable, and contact Samsung Customer Service Center (page 78).
Product failure, an electric shock or fire may result.
Before Using the Product 14
Before Using the Product
Caution
-_-
!
!
Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.
If you are not going to use the product for an extended period of time, activate power-saving mode or a moving-picture screen saver.
Disconnect the power cable from the power socket if you do not plan on using the product for an extended period of time (vacation, etc.).
Otherwise, a fire may result from accumulated dust, overheating, an electric shock, or electric leakage.
Use the product at the recommended resolution and frequency.
Otherwise,Your eyesight may deteriorate.
Do not put DC power adapters together.
Otherwise, a fire may result.
Remove the plastic bag from the DC power adapter before you use it.
Otherwise, a fire may result.
Do not let water enter the DC power device or get the device wet.
An electric shock or fire may result.
Avoid using the product outdoors where it can be exposed to rain or snow.
Be careful not to get the DC power adapter wet when you wash the floor.
Do not put the DC power adapter near to any heating apparatus.
Otherwise, a fire may result.
Keep the DC power adapter in a well-ventilated area.
!
Looking at the screen too close for an extended period of time can deteriorate your eyesight.
!
Before Using the Product 15
Before Using the Product
Do not hold the monitor upside-down or move it by holding the stand.
The product may fall and break or cause a personal injury.
Do not use humidifiers or stoves around the product.
An electric shock or fire may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
Eye fatigue will be relieved.
!
Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
Store the small accessories used with the product out of reach of children.
! |
|
|
Exercise caution when adjusting the product angle or stand height. |
|
Otherwise, children's fingers or hands may become stuck and injured. |
! |
Tilting the product excessively may cause it to fall and result in personal |
|
injury. |
|
Do not place heavy objects on the product. |
|
Product failure or personal injure may result. |
Before Using the Product 16
Before Using the Product
Use the product in the correct posture as follows:
Straighten your back.
Allow a distance of 45 to 50 cm between your eye and the screen, and look slightly downward at the screen.
Keep your eyes directly in front of the screen.
Adjust the angle so light does not reflect on the screen.
Keep your forearms perpendicular to your upper arms and level with the back of your hands.
Keep your elbows at about a right angle.
Adjust the height of the product so you can keep your knees bent at 90 degrees or more, your heels attached to the floor, and your arms lower than your heart.
Before Using the Product 17
Contact the dealer from whom you purchased the product if any item is missing.
The appearance of the components and items sold separately may differ from the image shown.
Components
Quick setup guide |
Warranty card |
User manual (optional) |
(Not available in some locations)
HDMI cable (optional) |
HDMI-DVI cable (optional) |
D-SUB cable (optional) |
DC power adapter |
DC power adapter |
|
|
|
Power cable |
||
(Integrated) |
(Detachable) |
(Only provided with the |
|
(optional) |
(optional) |
detachable DC power |
|
|
|
|
adapter.) |
Stand base |
Stand neck |
Components may vary depending on the country.
1 Preparations 18
1Preparations
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
|
|
|
|
Function Key Guide |
MENU |
GAME |
SOURCE |
||
MODE |
||||
|
|
|
|
AUTO |
MENU |
GAME |
SOURCE |
||
MODE |
SAMSUNG
Icons |
Description |
|
|
Open or close the onscreen display (OSD) menu, or return to the parent menu.
OSD control lock: Maintain the current settings, or lock the OSD control to prevent unintended changes to settings.
Enable: To lock the OSD control, press and hold the [MENU] button for 10 seconds.
MENU
Disable: To unlock the OSD control, press and hold the [MENU] button for more than 10 seconds.
If the OSD control is locked,
Brightness and Contrast can be adjusted. Game Mode is available.
INFORMATION can be viewed.
Press to enable or disable Game Mode.
The items below are not available if the Game Mode function is enable.
S22E360H / S22E391H
PICTURE → Contrast, Sharpness, MAGICSAMSUNGBright, MAGICSAMSUNGAngle,
MAGICSAMSUNGUpscale
COLOR
SETUP&RESET → Eco Saving
S24E360HL / S24E391HL / S27E360H / S27E391H
PICTURE → Contrast, Sharpness, MAGICSAMSUNGBright, MAGICSAMSUNGUpscale
COLOR
SETUP&RESET → Eco Saving
1 Preparations 19
1Preparations
Icons |
|
Description |
|
|
|
||
|
Move to the upper or lower menu or adjust the value for an option on the |
||
|
OSD menu. |
|
|
|
|
||
|
Use this button to control the brightness and contrast of the screen. |
||
|
|
|
|
|
Confirm a menu selection. |
|
|
|
Pressing the [ |
] button when the OSD menu is not displayed will |
|
|
change the input source (Analog/HDMI). If you power on the product or |
||
|
change the input source by pressing the [ |
] button, a message that |
|
|
shows the changed input source will appear at the top left corner of the |
||
|
screen. |
|
|
|
|
||
|
Press the [AUTO] button to automatically adjust the screen settings. |
||
AUTO |
Changing the resolution in Display Properties will activate the |
||
Auto Adjustment function. |
|
Available only in Analog mode.
Turn the screen on or off.
When a control button on the product is pressed, the Function Key Guide will be displayed before the onscreen menu opens.
(The guide shows the function of the button pressed.)
To access the onscreen menu when the guide is displayed, press the corresponding button again.
Function Key Guide Function Key Guide may vary depending on the function or product model. Refer to the actual product.
The function buttons page shows if Game Mode is enabled.
[]: Off
[]: On
1 Preparations 20
1Preparations
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
Port |
Description |
|||
|
|
|
|
|
|
|
|
|
Connects to the DC power adapter. |
|
|
|
|
|
|
|
|
|
Connect to a source device using an HDMI cable. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connect to a PC using the D-SUB cable. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 Preparations 21
Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product.
Check the types of ports at the back of the product you want to connect.
Select a connection method suitable for your PC.
Connecting parts may differ in different products.
The exterior may differ depending on the product.
Connection Using the D-SUB Cable (Analog Type)
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
RGB IN
1Connect the D-SUB cable to the [RGB IN] port on the back of the product and the RGB port on the PC.
2Connect the DC power adapter to the product and a power socket. Next, turn on the power switch
on the PC. (For details, refer to "2.2.2 Connecting the Power".)
3 Press [] to change the input source to Analog.
2 Connecting and Using a Source Device 26
2Connecting and Using a Source Device
Connection Using the HDMI Cable
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
HDMI IN
1Connect the HDMI cable to the [HDMI IN] port on the back of the product and the HDMI port on the PC.
2Connect the DC power adapter to the product and a power socket. Next, turn on the power switch
on the PC. (For details, refer to "2.2.2 Connecting the Power".)
3 Press [] to change the input source to HDMI.
Connection Using the HDMI-DVI Cable
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
HDMI IN
1Connect the HDMI-DVI cable to the [HDMI IN] port on the back of the product and the DVI port on the PC.
2Connect the DC power adapter to the product and a power socket. Next, turn on the power switch
on the PC. (For details, refer to "2.2.2 Connecting the Power".)
3 Press [] to change the input source to HDMI.
2 Connecting and Using a Source Device 27
2Connecting and Using a Source Device
Connecting parts may differ in different products.
The exterior may differ depending on the product.
Power connection using integrated DC power adapter
Connect the power adapter to [DC14V] jack on the rear of the product. Plug in the power cable to the power socket.
DC14V
The input voltage is switched automatically.
Power connection using detachable DC power adapter
Connect the power adapter to [DC14V] jack on the rear of the product. Connect the power cable to the DC power adapter. Next, connect the DC power adapter to the product. Plug in the power cable to the power socket.
DC14V
The input voltage is switched automatically.
2 Connecting and Using a Source Device 28
2Connecting and Using a Source Device
You can set the optimum resolution and frequency for this product by installing the corresponding drivers.
An installation driver is contained on the CD supplied with the product.
If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com/) and download the file.
1Insert the user manual CD provided with the product into the CD-ROM drive.
2Click "Windows Driver".
3Follow the instructions given on the screen to proceed with installation.
4Select your product model from the list of models.
5Go to Display Properties and check that the resolution and refresh rate are appropriate. Refer to your Windows OS manual for further details.
2 Connecting and Using a Source Device 29
2Connecting and Using a Source Device
An information message about setting optimum resolution will appear if you power on the product for the first time after purchase.
Select a language on the product and change the resolution on your PC to the optimum setting.
6HWXS *XLGH
7KH RSWLPDO UHVROXWLRQ IRU WKLV PRQLWRU LV DV IROORZV
****x**** **Hz
8VH WKH DERYH VHWWLQJV WR VHW WKH UHVROXWLRQ RQ \RXU 3&
(QJOLVK
5HWXUQ
1Press [] to move to the language you want and press [
].
2To hide the information message, press [MENU] or [].
If the optimum resolution is not selected, the message will appear up to three times for a specified time even when the product is turned off and on again.
The optimum resolution can also be selected in Control Panel on your PC.
2 Connecting and Using a Source Device 30