Samsung LNT3253HX/XAA, LNT2653HX/XAA, LNT2354HX/XAA User Manual

Contacte con SAMSUNG WORLD-WIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente.
LN-T2353H
Country
CANADA 1-800-SAMSUNG (7267864) www.samsung.com/ca
U.S.A 1-800-SAMSUNG (7267864) www.samsung.com
Customer Care Center
Web Site Address
Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada
Samsung Electronique Canada Inc., Service à la Clientèle 55 Standish Court Mississauga, Ontario L5R 4B2 Canada
Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511
LN-T2354H LN-T2653H LN-T3253H LN-T4053H
TFT-LCD TELEVISION
BN68-01156B-01
Owner’s Instructions
Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
· Model __________ · Serial No. ____________
Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.
• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
Precauciones al mostrar en la pantalla una imagen fija
La imagen fija puede causar daños permanentes en la pantalla del televisor.
• No deje una imagen fija en la pantalla LCD durante más de dos horas ya que se podría producir una retención de la imagen en la pantalla. Este fenómeno de retención de imágenes también se denomina “quemadura de pantalla”. Para evitar que se produzca esa persistencia de la imagen, reduzca el nivel de luminosidad y de contraste de la pantalla cuando muestre imágenes fijas.
El uso del televisor LCD en formato 4:3 durante un tiempo prolongado puede dejar rastros de bordes en las
partes izquierda, derecha y central de la pantalla debido a las diferencias en la emisión lumínica de la pantalla. La reproducción de un DVD o el uso de una consola de videojuegos pueden provocar un efecto similar en la pantalla. Reproducir un DVD o una videoconsola puede causar un efecto similar en la pantalla. La garantía no cubre estos daños.
• Ver imágenes fijas de videojuegos y PC durante más tiempo del indicado puede producir restos de imágenes parciales.
Para evitar este efecto, reduzca el ‘brillo’ y el ‘contraste’ cuando vea imágenes fijas.
© 2007 Samsung Electronics Co., Ltd. All rights reserved.
Contents
GENERAL INFORMATION
List of Features .........................................................................2
Accessories ..............................................................................2
Viewing the Control Panel .......................................................3
Viewing the Connection Panel (depending on the model) ........ 4
Remote Control (LN-T2353H, LN-T2354H , LN-T2653H) ........5
Remote Control (LN-T3253H, LN-T4053H) ..............................6
Installing Batteries in the Remote Control ................................7
CONNECTIONS
Connecting VHF and UHF Antennas ........................................7
Connecting Cable TV ................................................................ 8
Connecting a VCR ....................................................................9
Connecting a DVD Player/Set-Top Box ..................................10
Connecting a Camcorder .......................................................10
Connecting a DVD Player/Set-Top Box via HDMI .................. 11
Connecting a DVD Player/Set-Top Box via DVI ...................... 11
Connecting a Digital Audio System .........................................12
Connecting an Amplier/DVD Home Theater .........................12
Connecting a PC ..................................................................... 12
OPERATION
Turning the TV On and Off ......................................................13
Plug & Play Feature ................................................................13
Changing Channels ................................................................ 14
Adjusting the Volume ..............................................................15
Viewing the Display ................................................................15
Viewing the Menus .................................................................16
Memorizing the Channels .......................................................16
Setting Up Your Remote Control (depending on the model)... 18
Remote Control Codes ........................................................... 20
To Select the Source (depending on the model)..................... 23
To Edit the Input Source Name (depending on the model) .....23
PICTURE CONTROL
Using Automatic Picture Settings ............................................24
Adjusting the Color Tone ......................................................... 25
Activating Backlight ................................................................. 25
Adjusting the Detailed Settings ...............................................26
Changing the Screen Size ......................................................29
Setting the Active Color .......................................................... 30
DNIe (Digital Natural Image engine) .......................................30
Freezing the Picture (depending on the model)...................... 31
HDMI Black Level ................................................................... 31
Setting the Film Mode .............................................................31
Viewing Picture-in-Picture ....................................................... 32
SOUND CONTROL
Customizing the Sound ........................................................... 34
Using Automatic Sound Settings ............................................ 34
Setting the TruSurround XT ....................................................35
Choosing a Multi-Channel Sound (MTS) track - Digital .........35
Choosing a Multi-Channel Sound (MTS) track - Analog ........36
Automatic Volume Control ......................................................36
Selecting the Internal Mute .....................................................37
Setting the On/Off Melody ......................................................37
Listening to the Sound of the Sub (PIP) Picture ..................... 38
Resetting the Sound Settings to the Factory Defaults ............38
Connecting Headphones ........................................................ 38
Selecting the Antenna ............................................................. 39
CHANNEL CONTROL
Clearing Scrambled Channels - Digital ...................................39
Setting the Channel Lists ........................................................40
To set-up Your Favorite Channels ...........................................41
Using the Channel Lists ..........................................................42
Viewing the Channel Lists ......................................................42
Labeling Channels ..................................................................43
LNA (Low Noise Amplier) ...................................................... 43
Fine Tuning Analog Channels .................................................44
Checking the Digital-Signal Strength ......................................44
PC DISPLAY
Using Your TV as a Computer (PC) Display ........................... 45
Display Modes ........................................................................ 45
Setting up the TV with your PC ............................................... 46
Setting the Home Theater PC ................................................. 47
TIME SETTING
Setting the Clock ..................................................................... 48
FUNCTION DESCRIPTION
Selecting a Menu Language ...................................................52
Setting the Blue Screen Mode ................................................52
Using the Game Mode ............................................................53
Viewing Closed Captions (On-Screen Text Messages) -
Analog .....................................................................................
Viewing Closed Captions (On-Screen Text Messages) -
Digital ......................................................................................
Menu Transparency Level ...................................................... 56
Using the Energy Saving Feature ...........................................56
Setting the Function Help .......................................................57
Setting the Light Effect ............................................................ 57
Digital Noise Reduction ..........................................................58
Using the V-Chip ..................................................................... 59
Upgrading the Software (depending on the model) ................66
54
55
WISELINK
Using the WISELINK Function (LN-T3253H, LN-T4053H) .....67
Using the WISELINK Menu ....................................................68
Using the PHOTO (JPEG) List ...............................................69
Using the MP3 List .................................................................. 76
Using the Setup Menu ............................................................ 78
ABOUT ANYNET
What is Anynet+? (LN-T3253H, LN-T4053H) ........................80
Connecting Anynet+ Devices .................................................. 80
Setting Up Anynet+ ................................................................. 81
Scanning and Switching between Anynet+ Devices ............... 81
Recording ...............................................................................82
Listening through a Receiver (Home theater) .........................83
Check Points before Requesting Service ............................... 83
+
APPENDIX
Troubleshooting ......................................................................84
Installing the Stand ................................................................. 86
Disconnecting the Stand .........................................................86
Wall- Mount Adjustment (LN-T4053H) (Sold separately) ........87
Wall Mount Kit Specications ( VESA ) ...................................88
Using the Anti-Theft Kensington Lock .....................................89
Specications .......................................................................... 89
English
English - 1
Symbol Press Important Note One-Touch
Button

General Information

List of Features
Adjustable picture settings that can be stored in the TV’s memory. Automatic timer to turn the TV on and off. A special sleep timer. V-Chip function. Excellent Digital Interface & Networking :
With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Set-Top Box needed. Remote Control The supplied remote can be used to operate the TV as well as most DVD players, Set-top boxes, Cable Boxes and VCRs. Excellent Picture Quality
- DNIe technology provides life-like clear images.
SRS TruSurround XT
- SRS TruSurround XT provides a virtual Dolby surround system.
Accessories
Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
Remote Control & Batteries (AAA x 2) LN-T2353H, LN-T2653H (BN59-00598A) LN-T2354H (BN59-00615A) LN-T3253H, LN-T4053H (BN59-00599A)
Stand LN-T2353H (BN96-04663A) LN-T2354H (BN96-04663B) LN-T2653H (BN96-04663A)
LN-T3253H (BN96-04662A)
The items color and shape may vary depending on the model.
Stand Screw LN-T2353H, LN-T2653H, LN-T3253H (6002-001294) LN-T2354H (6003-001324)
Power Cord
(3903-000144)
Cleaning Cloth
(BN63-01798A)
Owner’s Instructions
Cover-Bottom LN-T2353H, LN-T2653H (BN63-03221B) LN-T2354H (BN63-03221C) LN-T3253H (BN63-03103B) LN-T4053H (BN63-03113B)
Warranty Card / Registration
Card / Safety Guide Manual
(Not available in all locations)
English - 2
Viewing the Control Panel
Buttons on the Lower-Right Part of the Panel
The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.
1 2
3
4
5
6
7
The product color and shape may vary depending on the model.
1
SOURCE
Toggles between all the available input sources (TV, AV1, AV2, S-Video 1, S-Video 2, Component1, Component2, PC, HDMI1, HDMI2, HDMI3). In the on-screen menu, use this button as you would use the ENTER button on the remote control.
23,26 inch model supports TV, AV1, AV2, S-Video1, S-Video 2, Component 1,Component 2, PC, HDMI1, and HDMI2 only.
2
MENU
Press to see an on-screen menu of your TV’s features.
3
+ VOL -
Press to increase or decrease the volume. In the on-screen menu, use the + VOL - buttons as you
would use the ◄ and ► buttons on the remote control.
Front Panel buttons
Touch the right side of each button to operate.
4 CH
Press to change channels.
In the on-screen menu, use the you would use the ▲ and ▼ butons on the remote control.
5
(POWER)
Press to turn the TV on and off. POWER INDICATOR Blinks and turns off when the power is on and lights up
in stand-by mode.
6
REMOTE CONTROL SENSOR
Aim the remote control towards this spot on the TV.
7
SPEAKERS
CH
buttons as
English - 3
Viewing the Connection Panel (depending on the model)
Rear Panel Jacks
Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For more information on connecting equipment, see pages 6-12.
[Side Panel Jacks]
1
AUDIO OUT
Connects to the audio input jacks on your Amplifier/ Home theater.
2 DIGITAL AUDIO OUT (OPTICAL) Connects to a Digital Audio component.
3 PC IN Connects to the video and audio output jacks on your PC.
4 HDMI IN 1,2,3 /DVI IN(HDMI1) (AUDIO R/L)
Connects to the HDMI jack of a device with an HDMI output.
Use the HDMI IN 1 terminal for a DVI connection to an
external device. You should use the DVI to HDMI cable or DVI-HDMI adapter (DVI to HDMI) for a video connection, and the DVI IN ‘R-AUDIO-L’ terminal for audio.
- No sound connection is needed for an HDMI to HDMI
connection
- When using an HDMI/DVI cable connection, you must
use the HDMI IN 1 terminal.
- 23,26 inch model supports HDMI1 and HDMI2 only.
5 ANT 1 IN/ANT 2 IN Connects to an antenna or cable TV system.
EX LINK
6
Connect this to the jack on the optional wall mount
bracket. This will allow you to adjust the TV viewing angle using your remote control.
7
COMPONENT IN
Connects Component video/audio.
8
SERVICE (LN-T2353H, LN-T2354H, LN-T2653H)
Connector for SERVICE only
9
AV IN 1 / AV IN 2
Video and audio inputs for external devices, such as a camcorder or VCR. S-VIDEO Connects an S-Video signal from a camcorder or VCR.
0
POWER INPUT
Connects the supplied power cord
!
KENSINGTON LOCK
The Kensington lock (optional) is a device used to physically fix the system when used in a public place. If you want to use a locking device, contact the dealer where you purchased the TV. The place of the Kensington Lock may be different depending on its model.
@
HEADPHONE
Connects a set of external headphones for private listening.
#
WISELINK (LN-T3253H,LN-T4053H)
Connect a USB mass storage device to view photo files(JPEG) and play audio files (MP3).
English - 4
Remote Control (LN-T2353H, LN-T2354H, LN-T2653H)
You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box.
1
POWER
Turns the TV on and off.
2
NUMERIC BUTTONS
Press to change the channel.
3
Press to select additional channels(digital and analog) being broadcast by the same station. For example, to select channel “54-3”, press “54”, then press “–” and “3”.
4
CH LIST
Used to display Channel Lists on the screen.
5
ANTENNA
Press to select “AIR” or “CABLE”.
6
VCR/DVD Functions
- Rewind
- Stop
- Play/Pause
- Fast/Forward
7
VOL / VOL
Press to increase or decrease the volume.
8 (
MUTE)
Press to temporarily cut off the sound.
9
MENU
Displays the main on-screen menu.
0
S.MODE
Press to select the sound mode.
!
RETURN
Returns to the previous menu.
@
P.MODE
Press to select the picture mode.
#
SRS
Selects SRS TruSurround XT mode.
$
MTS Press to choose stereo, mono or
Separate Audio Program (SAP broadcast).
%
SLEEP
Press to select a preset time interval for automatic shut off.
^
AUTO PROG.
Press to automatically store selected TV/Cable channels.
&
SET
Sets the remote to control your TV, VCR, Cable, DVD, or Set-Top Box
*
TV, DVD, STB, CABLE, VCR Press to operate your TV, DVD, STB, CABLE (box), or VCR
see pages 18~22.)
(
(
When pressing this button, a number of buttons on the remote control (e.g. TV, DVD, STB, CABLE, VCR, VOL and CH buttons) light up for a few seconds and then turn off to save power. This function is convenient for using the remote at night or when dark. (LN-T2353H, LN-T2653H)
)
SOURCE
Press to display all of the available video sources.
a
PRE-CH Tunes to the previous channel.
b
FAV.CH
Press to switch to your favorite channels.
HDMI
c
Selects the HDMI mode directly.
CH
d
/ CH
Press to change channels.
EXIT
e
Press to exit the menu.
f
UP▲ / DOWN▼ / LEFT◄ RIGHT►
Use to select on-screen menu items and change menu values.
g
Press to display information on the TV screen.
h
i
particular scene. Press again to resume normal video.
j
k
Picture-in Picture ON/OFF.
l
sequence. (These buttons change channels in the PIP window only.)
m
Use to store and delete channels to/from memory.
n
change the batteries and press the RESET button for 2-3 seconds before use.
/ ENTER
INFO
CAPTION
Controls the caption decoder.
STILL
Press to stop the action during a
P.SIZE
Picture size selection.
PIP
CH /
Displays the available channels in
ADD/DEL
RESET
When your remote does not work,
/
This is a special remote control for the visually impaired, and has Braille
points on the Power, Channel, STOP, PLAY/PAUSE and Volume buttons.
The performance of the remote control may be affected by bright light.
English - 5
Remote Control (LN-T3253H, LN-T4053H)
You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box.
1
POWER
Turns the TV on and off.
2
NUMERIC BUTTONS
Press to change the channel.
3
Press to select additional channels(digital and analog) being broadcast by the same station. For example, to select channel “54-3”, press “54”, then press “–” and “3”.
4
CH LIST
Used to display Channel Lists on the screen.
5
ANTENNA
Press to select “AIR” or “CABLE”.
6
VCR/DVD Functions
- Rewind
- Stop
- Play/Pause
- Fast/Forward
7
VOL / VOL
Press to increase or decrease the volume.
8 (
MUTE)
Press to temporarily cut off the sound.
9
MENU
Displays the main on-screen menu.
0
S.MODE
Press to select the sound mode.
!
RETURN
Returns to the previous menu.
@
P.MODE
Press to select the picture mode.
#
CAPTION
Controls the caption decoder.
$
FAV.CH
Press to switch to your favorite channels.
%
SLEEP
Press to select a preset time interval for automatic shut off.
^
SRS
Selects SRS TruSurround XT mode.
&
SET
Sets the remote to control your TV, VCR, Cable, DVD, or Set-Top Box
*
TV, DVD, STB, CABLE, VCR Press to operate your TV,DVD, STB, CABLE (box), or VCR (See pages 18-22)
(
When pressing this button, a number of buttons on the remote control (e.g. TV, DVD, STB, CABLE, VCR, VOL and CH buttons) light up for a few seconds and then turn off to save power. This function is convenient for using the remote at night or when dark.
This is a special remote control for the visually impaired, and has Braille points on the Power, Channel, STOP, PLAY/PAUSE and Volume buttons.
The performance of the remote control may be affected by bright light.
)
SOURCE
Press to display all of the available video sources.
a
PRE-CH
Tunes to the previous channel.
b
WISELINK
This function enables you to view and play photo (JPEG) and audio files (MP3) from an external device. (Refer to page
c
REC
Records for Live Broadcasting.
CH
d
Press to change channels.
EXIT
e
Press to exit the menu.
f
UP▲ / DOWN▼ / LEFT◄
RIGHT►
Use to select on-screen menu items and change menu values.
INFO
g
Press to display information on the TV screen.
h
Anynet+
Runs the Anynet view functions and
sets up Anynet devices.
STILL
i
Press to stop the action during a particular scene. Press again to resume normal video.
P.SIZE
j
Picture size selection.
PIP
k
Picture-in Picture ON/OFF.
CH /
l
Displays the available channels in sequence. (These buttons change channels in the PIP window only.)
MTS
m
Press to choose stereo, mono or Separate Audio Program (SAP broadcast).
RESET
n
When your remote does not work, change the batteries and press the RESET button for 2-3 seconds before use.
/ CH
68)
/ ENTER
/
English - 6
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
Install two AAA size batteries.
2.
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.
3.
Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries should last for about one year.)
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage, or is the power cord unplugged?
5. Is there a special fluorescent light or neon sign nearby?

Connections

Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like the diagram to the right, see “Antennas with 300
Ω Flat Twin Leads” below.
If your antenna has one lead that looks like diagram to the right, see “Antennas with 75 Ω Round Leads”.
If you have two antennas, see “Separate VHF and UHF Antennas”.
Antennas with 300 Ω Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears") that has 300 Ω twin at leads, follow the directions
below.
1. Place the wires from the twin leads under the screws on a 300-75 Ω adapter
(not supplied). Use a screwdriver to tighten the screws.
Plug the adaptor into the ANT 2 IN (CABLE) terminal on the back of the TV.
2.
ANT 2 IN (CALBE)
Antennas with 75 Ω Round Leads
1.
Plug the antenna lead into the ANT 1 IN (AIR) terminal on the back of the TV.
ANT 1 IN
(AIR)
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before con­necting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).
1.
Connect both antenna leads to the combiner.
UHF
VHF
Plug the combiner into the ANT 1 IN (AIR) terminal on the bottom of the rear panel.
2.
English - 7
ANT 1 IN
(AIR)
UHF
VHF
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
1.
Plug the incoming cable into the ANT 2 IN (CABLE) terminal on the back of the TV.
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.
Connecting to a Cable Box that Descrambles All Channels
1. Find the cable that is connected to the ANT OUT terminal on your cable box.
This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.
ANT IN
ANT 2 IN (CABLE)
ANT OUT
2. Connect the other end of this cable to the ANT 2 IN (CABLE) terminal on the back of the TV.
ANT 2 IN (CABLE)
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two­way splitter, an RF (A/B) switch, and four lengths of RF cable. (These items are available at most electronics stores.)
1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.
Connect this cable to a two-way splitter.
2.
This terminal might be labeled “ANT IN”,
"VHF IN” or simply, “IN”.
3. Connect an RF cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box.
Incoming
cable
4. Connect an RF cable between the
ANT OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.
Incoming
cable
Splitter
5. Connect another cable between the other
OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.
Incoming
cable
Splitter
6. Connect the last RF cable between the
OUT terminal on the RF (A/B) switch and the ANT IN terminal on the rear of the TV.
Incoming
cable
Splitter
After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)
Splitter
Cable Box
ANT IN
Incoming
cable
Cable Box
Cable Box
Splitter
RF (A/B)
Switch
Cable Box
RF (A/B)
Switch
RF (A/B)
Switch
ANT IN
TV Rear
English - 8
Connecting a VCR
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 7-8). Skip step 1 if you have not yet connected to an antenna or a cable system.
Unplug the cable or antenna
1.
from the back of the TV.
2.
Connect the cable or antenna to the ANT IN terminal on the back of the VCR.
3. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT 1 IN (AIR) or ANT 2 IN (CABLE) terminal on the TV.
4. Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV IN 1 (or AV IN 2) [VIDEO] jack on the TV.
5. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 1 (or AV IN 2) [R- AUDIO-L] jacks on the TV.
If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables.
VCR Rear Panel
Audio Cable (Not supplied)
5
2
Video Cable (Not supplied)
4
RF Cable (Not supplied)
3
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable.
ANT 1 IN
(AIR)
ANT 2 IN (CABLE)
TV Rear Panel
S-Video Connection
Your Samsung TV can be connected to an S-Video signal from an VCR. (This connection delivers a better picture as compared to a standard VCR.)
1. To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV.
Connect an S-Video Cable
2.
VCR Rear Panel
between the S-VIDEO OUT jack on the VCR and the AV IN1 [S-VIDEO] jack on the TV.
Connect Audio Cables
3.
between the AUDIO OUT jacks on the VCR and the AV IN1 [R-AUDIO-L] jacks on the TV.
An S-Video cable may be included with a VCR. (If not, check your local electronics store.)
Audio Cable (Not supplied)
3
S-Video Cable (Not supplied)
2
RF Cable (Not supplied)
1
Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable.
English - 9
TV Rear Panel
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR
1. Connect a Video Cable between the AV IN2 [VIDEO] jack on the TV and the VIDEO OUT jack on the camcorder.
2.
Connect Audio Cables between the AV IN2 [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the camcorder.
Camcorder
1
2
Each Camcorder has a different back panel configuration. When connecting a Camcorder, match the color of the connection terminal to the cable.
TV Side Panel
Video Cable (Not supplied)
Audio Cable (Not supplied)
Connecting a DVD Player/Set-Top Box
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
Connect a Component
1.
Cable between the COMPONENT IN(1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB, PR] jacks on the DVD/Set-top Box.
2.
Connect Audio Cables between the COMPONENT IN(1 or 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the DVD/Set-top Box
DVD Player/Set-Top Box
Audio Cable (Not supplied)
2
Component Cable (Not supplied)
1
Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr (Red) for enhanced video quality. Be sure to match the component video and audio connections. For example, if connecting the video cable to COMPONENT IN, connect the audio cable to COMPONENT IN also.
Each DVD Player/STB has a different back panel configuration.
When connecting a DVD player/STB, match the color of the connection terminal to the cable.
TV Rear Panel
English - 10
Connecting a DVD Player/Set-Top Box via HDMI
This connection can only be made if there is an HDMI Output connector on the external device.
Connect an HDMI Cable
1.
between the HDMI IN (1,2 or 3) connector on the TV and the HDMI connector on the DVD player/Set-Top Box
DVD Player Rear Panel
TV Rear Panel
TV Side Panel
HDMI Cable (Not supplied)
What is HDMI?
• HDMI(High-Definition Multimedia Interface), is a next-generation an interface that enables the transmission of digital audio and video signals using a single cable.
• The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed.
Each DVD player/STB has a different back panel configuration. 32,40 inch model supports HDMI 3 only
Connecting a DVD Player/Set-Top Box via DVI
This connection can only be made if there is a DVI Output connector on the external device.
1.
Connect a DVI to HDMI Cable or DVI-HDMI Adapter between the HDMI IN 1 connector on the TV and the DVI connector on the DVD player/Set-Top Box.
2.
Connect Audio Cables between the DVI IN (HDMI 1) [R-AUDIO-L] jack on the TV and the AUDIO OUT jacks on the DVD player/ Set-Top Box.
DVD Player / Set-Top Box
or
TV Rear Panel
Audio Cable (Not supplied)
2
DVI to HDMI Cable (Not supplied)
1
Each DVD player/STB has a different back panel configuration. When connecting a DVD player/STB, match the color of the connection terminal to the cable.
When using an HDMI/DVI cable connection, you must use the HDMI IN 1 terminal.
English - 11
Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
1. Connect an Optical Cable between the “DIGITAL
Digital Audio System
AUDIO OUT (OPTICAL)” jacks on the TV and the Digital Audio Input jacks on the Digital Audio System.
When a Digital Audio System is connected to the “DIGITAL AUDIO OUT (OPTICAL)” terminal: Decrease the volume
Optical Cable (Not supplied)
of the TV, and adjust the volume level with the system’s volume control.
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH. Each Digital Audio System has a different back panel configuration. .
Connecting an Amplier/DVD Home Theater
TV Rear Panel
1. Connect Audio Cables
between the AUDIO OUT [R-AUDIO-L] on the TV and AUDIO IN [R-AUDIO­ L] on the Amplifier/DVD Home Theater.
When an audio amplifier is connected to the “AUDIO OUT [L-AUDIO-R]” terminals: Decrease the volume of the TV, and adjust the volume level with the Amplifier’s volume control.
Connecting a PC
1. Connect a D-Sub
Cable between PC IN [PC] connector on the TV and the PC output connector on your computer.
Connect a PC Audio
2.
Cable between PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer.
TV Rear Panel
Amplier/DVD Home Theater
Audio Cable (Not supplied)
Each Amplifier/DVD Home Theater has a different back panel configuration. When connecting an Amplifier/DVD Home Theater, match the color of the connection terminal to the cable.
TV Rear Panel
PC
PC Audio Cable (Not supplied)
2
D-Sub Cable (Not supplied)
1
Each PC has a different back panel configuration. When connecting a PC, match the color of the connection terminal to the cable. When using an HDMI/DVI cable connection, you must use the HDMI IN 1 terminal.
English - 12

Operation

Turning the TV On and Off
Press the POWER button on the remote control. You can also use the button on the front of the panel.
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently:
1. Press the POWER button on the remote control. The message “Menu language, Shop Mode, Channels and Time will be set.” is displayed. Press the ENTER button, then “Select the language of the OSD” menu is automatically displayed.
Press the ▲ or ▼ buttons to select language, then press the ENTER button.
2.
The message “Select Home Mode when installing this TV at home.” is displayed.
Press the ◄ or ► buttons to select “Shop” or “Home”, then press the
3.
ENTER button. The message “Select the antennas to memorize.” is displayed.
We recommend setting the TV to Home mode for the best picture in your home environment. Shop mode is only intended for use in retail environments. If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode, press any Volume button and then hold down the MENU button for five seconds on the side panel of the TV.
4.
Press the ▲ or ▼ buttons to memorize the channels of the selected connection. Press the ENTER button to select “Start”. If the antenna is connected to ANT 1(AIR), select “Air” and if it is connected to ANT 2 (CABLE), select “Cable”.
If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the “Air + Cable”. In Cable mode, you can select the correct signal source among STD, HRC,
and IRC by pressing the ▲ or ▼ button, then press the ENTER button. Contact your local cable company to identify the type of cable system that exists in your particular area.
The TV will begin memorizing all of the available channels.
5.
After all the available channels are stored, the Auto program menu reappears. Press the ENTER button when channel memorization is complete. The message “Select the clock mode.” is displayed.
To stop the search before it has finished, press the ENTER button with stop selected.
Menu language, Shop Mode,
Channels and Time will be set.
Select the language of the OSD.
Menu Language
Move Enter Skip
Select Home Mode when installing this TV at home.
Move Enter Skip
Select the antennas to memorize.
Air Cable Air+Cable
Move Enter Skip
Auto Program in progress.
Enter Skip
Auto Program is completed. 16 Channels were memorized. Air : 16,
Shop
Cable : 0.
Start
Plug & Play
English
Español
Français
Plug & Play
Home
Plug & Play
Start Start Start
Plug & Play
Air Channel 50
35%
Stop
Plug & Play
6. Press the ENTER button.
Press the ▲ or ▼ buttons to select “Manual” or “Auto”, then Press the ENTER button. The message “Set to daylight savings time.” is displayed.
English - 13
OK
Enter
Clock Set
Select the clock mode.
Clock Mode :
Move Enter Skip
Plug & Play
Manual
Auto
Skip
7. Press the ▲ or ▼ buttons to select “On” or “Off”, then Press the ENTER button.
The message “Select the time zone in which you live.” is displayed.
Set to daylight savings time.
Plug & Play
Daylight Savings Time :
On
Off
8. Press the ▲ or ▼ buttons to highlight the time zone for your local area.
Press the ENTER button. If you have received a digital signal, the time will be set automatically. If not, see page 49 to set the clock.
The message “Enjoy your watching.” is displayed.
9. When you have finished, press the ENTER button.
If you want to reset this feature...
1. Press the MENU
button to display the menu.
Press the ▲ or ▼ buttons to select “Setup”, then press the ENTER button.
2. Press the ENTER
3. The message “Menu language, Shop Mode, Channels and Time will be set."
button again, to select “Plug & Play”.
is displayed.
Move Enter Skip
Select the time zone in which you live.
Newfoundland
Atlantic
Eastern
Central
Mountain
Pacific Alaska Hawaii
Move Enter Skip
TV
Plug & Play
Enjoy your watching.
OK
Plug & Play Language : English Time
Game Mode : Off
V-Chip Caption ► Menu Transparency : High ▼More
Move Enter Return
Menu language, Shop Mode,
Channels and Time will be set.
Setup
Start
Changing Channels
Using the Channel Buttons
1. Press the CH or
When you press the CH or sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels). You will not see channels that were either erased or not memorized. See page 17 to memorize channels.
Using the PRE-CH Button to select the Previous Channel
1. Press the PRE-CH button.
The TV will switch to the last channel viewed. To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel. Then use the PRE-CH button to quickly alternate between them.
CH
button to change channels.
CH
button, the TV changes channels in
English - 14
Adjusting the Volume
1. Press the
VOL or VOL buttons to decrease or increase the volume.
Using Mute At any time, you can cut off the sound using the MUTE button.
1.
Press MUTE button and the sound cuts off. The word “ “ will appear in the lower-left corner of the screen.
2.
To turn mute off, press the MUTE button again, or simply press the
VOL or VOL buttons.
Viewing the Display
The display identies the current channel and the status of certain audio-video settings.
1. Press the INFO button on the remote control. The TV will display the channel, the type of sound,
and the status of certain picture and sound settings.
Air 7
Mono Picture Mode : Dynamic Sound Mode : Custom MTS : Stereo
05 : 54 pm
Press the INFO button once more or wait approximately 10 seconds and the
display disappears automatically.
English - 15
Viewing the Menus
1. With the power on, press the MENU button.
The main menu appears on the screen. The menu’ s left side has five icons: Picture, Sound, Channel, Setup, Input.
2.
Use the ▲ or ▼ buttons to select one of the five icons.
TV
Source List : TV Edit Name WISELINK Anynet+ (HDMI-CEC)
Input
Then press the ENTER button to access the icon’s sub-menu.
Press the EXIT button to exit.
3.
Move Enter Exit
The on-screen menus disappear from the screen after about one minute.
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (Air) and “Cable” channels. After the available channels are memorized, use the CH or channels by entering the channels digits. There are three steps for memorizing channels: selecting a broadcast source, memoriz­ing the channels (automatic) and adding or deleting channels (Channel Lists).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ buttons to select “Channel”, then press the ENTER button.
2.
Press the ENTER button select “Antenna”.
Press the ▲ or ▼ buttons to select “Air” or “Cable”, then press the ENTER button. Press the EXIT
button to exit.
CH
buttons to scan through the channels. This eliminates the need to change
TV
Antenna : Air Auto Program
Clear Scrambled Channel
Channel List Name Fine Tune
Signal Strength
LNA : On
Move Enter Return
TV
Antenna : Air
Auto Program
Clear Scrambled Channel
Channel List Name Fine Tune
Signal Strength
LNA : On
Move Enter Return
Channel
Channel
Air
Cable
English - 16
Storing Channels in Memory (Automatic Method)
1.
Press the MENU button to display the menu. Press the ▲ or ▼ buttons to select “Channel”, then press the ENTER button.
2.
Press the ▲ or ▼ buttons to select “Auto Program”, then press the ENTER button.
3.
Press the ▲ or ▼ buttons to select the antenna connection, then press the ENTER button.
Air: “Air” antenna signal. / Cable: “Cable” antenna signal. / Air+Cable: “Air” and “Cable” antenna signals.
When selecting the Cable TV system: Press the ENTER button to start the auto
4.
program. By default, the cable TV system is set to “STD”. If you want to select
another type of cable system, press the ▲ or ▼ button to select “STD”, “HRC” or
“IRC”. STD, HRC and IRC identify various types of cable TV systems. Contact your
local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected.
Press the ENTER
button to start the auto program.
To stop the search before it has finished, press the ENTER button with stop selected.
5.
After all the available channels are stored, the “Auto Program” menu reappears. Press the EXIT button to exit.
TV
Antenna : Air Auto Program
Clear Scrambled Channel
Channel List Name Fine Tune
Signal Strength
LNA : On
TV
Select the antennas to memorize.
Air Cable Air+Cable
TV
Select the cable system.
Move Enter Return
Auto Program in Progress.
Enter Return
Auto Program is completed. 16 Channels were memorized.
Cable : 0.
Air : 16,
Channel
Move Enter Return
Move Enter Return
Channel
Start
Start
Start
Move Enter Return
Move Enter Return
Auto Program
Analog
STD
HRC
IRC
Digital
STD
HRC
IRC
Move Enter Return
Auto Program
Plug & Play
Start
Cable Channel 50
Stop
35%
English - 17
OK
Enter Return
Setting Up Your Remote Control (depending on the model)
After the television has been set up properly, your remote control can operate in five different modes: TV, DVD, Cable, Set-Top Box, VCR. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose.
The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes.
Setting Up the Remote to Operate Your VCR
1. Turn off your VCR.
2. Press the VCR
3. Press the SET
4. Using the number buttons on your remote control, enter three digits of the VCR code
listed on page 20 of this manual for your brand of VCR. Make sure you enter three digits
of the code, even if the first digit is a “0”.
(If more than one code is listed, try the first one.)
5. Press the POWER button on the remote control.
Your VCR should turn on if your remote is set up correctly.
If your VCR does not turn on after set up, repeat steps 2, 3, and 4, but try one of the
other codes listed for your brand of VCR.
If no other codes are listed, try each VCR code, 000 through 080.
Note on Using Remote Control Modes: VCR When your remote control is in “VCR” mode, the volume buttons still control your TV’s volume.
button on your TV’s remote control.
button on your TV’s remote control.
Setting Up the Remote to Operate Your Cable Box
1. Turn off your cable box.
2. Press the CABLE
3. Press the SET
4. Using the number buttons on your remote control, enter three digits of the cable box code
listed on page 21 of this manual for your brand of cable box. Make sure you enter three
digits of the code, even if the first digit is a “0”. (If there is more than one code listed, try
the first one.)
5. Press the POWER button on the remote control.
Your cable box should turn on if your remote is set up correctly.
If your cable box does not turn on after set up, repeat steps 2, 3, and 4, but try one of the
other codes listed for your brand of cable box. If no other codes are listed, try each code,
000 through 046.
Note on Using Remote Control Modes: Cable Box When your remote control is in “CABLE” mode, the volume buttons still control your TV’s volume.
button on your TV’s remote control.
button on your TV’s remote control.
English - 18
Setting Up the Remote to Operate Your DVD
1. Turn off your DVD.
2. Press the DVD
3. Press the SET
button on your TV’s remote control.
button on your TV’s remote control.
4. Using the number buttons on your remote control, enter three digits of the DVD code
listed on page 21~22 of this manual for your brand of DVD.
Make sure you enter three digits of the code, even if the first digit is a “0”.
(If there is more than one code listed, try the first one.)
5. Press the POWER button on the remote control.
Your DVD should turn on if your remote is set up correctly.
If your DVD does not turn on after set up, repeat steps 2, 3, and 4, but try one of the
other codes listed for your brand of DVD.
If no other codes are list-ed, try each code, 000 through 141.
Note on Using Remote Control Modes: DVD When your remote control is in “DVD” mode, the volume buttons still control your TV’s volume.
Setting Up the Remote to Operate Your STB
1. Turn off your STB.
2. Press the STB
3. Press the SET
button on your TV’s remote control. button on your TV’s remote control.
4. Using the number buttons on your remote control, enter three digits of the STB code
listed on page 22 of this manual for your brand of STB.
Make sure you enter three digits of the code, even if the first digit is a “0”.
(If there is more than one code listed, try the first one.)
5. Press the POWER button on the remote control.
Your STB should turn on if your remote is set up correctly.
If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other
codes listed for your brand of STB.
(If no other codes are listed, try each code, 000 through 074.)
Note on Using Remote Control Modes: STB When your remote control is in “STB” mode, the volume buttons still control your TV’s volume.
English - 19
Remote Control Codes
VCR
Brand Code
SAMSUNG 000 001 002 003 004 005 077 078 079 ADMIRAL 020 AIWA 025 AKAI 004 027 032 AUDIO DYNAMICS 007 026 BELL&HOWELL 018 BROKSONIC 022 CANDLE 002 003 006 008 015 055 CANON 021 056 CITIZEN 002 003 006 008 015 055 COLORTYME 007 CRAIG 002 024 CURTIS MATHES 002 007 008 017 021 025 056 064 066 DAEWOO 003 010 011 012 013 014 015 016 DB 007 026 DIMENSIA 017 DYNATECH 025 ELECTROHOME 034 EMERSON
FISHER 018 024 028 029 048 051 061 FUNAI 025 GENERAL ELECTRIC GO VIDEO 002 HARMAN KARDON 007 HITACHI 019 025 041 042 074 INSTANT REPLAY 021 JC PENNEY JCL JVC KENWOOD KLH KONIA LG(Goldstar) LIOYD LOGIK LXI MAGNAVOX MARANTZ MARTA MEI MEMOREX MGA MIDLAND MINOLTA MITSUBISHI
001 003 006 021 022 025 030 032 034 040 047 050 052 060 063 065 066 067 069 073
002 005 017 021 056
002 007 018 019 021 026 037 041 054 056 007 008 018 021 026 037 081 082 083 007 008 018 021 026 037 070 036 006 007 008 009 010 025 038 025 021 056 059 007 008 018 021 026 037 062 006 021 006 021 024 025 034 005 019 041 075 019 034 041 046
Brand Code
MONTGOMERY WARD MTC 002 025 MULTITECH 002 005 025 038 NEC 007 008 018 026 037 062 064 OPTIMUS 020 ORION 073 074 075 076 PANASONIC 021 056 071 072 PENTAX 019 041 075 PENTEX RESEARCH+ PHILCO 021 056 059 PHILIPS 021 080 PIONEER 019 026 039 053 PORTLAND 015 049 055 PROSCAN 017 QUARTZ 018 QUASAR 021 056 RADIO SHACK/
REALISTIC RCA SANSUI 026 SANYO 018 024 SCOTT 003 047 052 067 SEARS 006 018 019 024 028 029 041 048 051 SHARP 020 034 045 015 SHIMTOM 027 033 038 058 SIGNATURE 025 SONY 027 033 044 SYLVANIA 021 025 056 059 SYMPHONIC 025 TANDY 018 025 TASHIKA 006 TATUNG 037 TEAC 025 037 068 TECHNICS 021 TEKNIKA 006 021 025 031 TMK 066 TOSHIBA 003 019 029 051 052 TOTEVISION 002 006 UNITECH 002 VECTOR RESEARCH VICTOR 026 VIDEO CONCEPTS 007 026 VIDEOSONIC 002 WARDS YAMAHA 007 008 018 026 037 ZENITH 023 027 033
020
008
006 018 020 021 024 025 029 034 048 056
002 017 019 021 035 041 043 057 068 076
007 026
002 003 006 019 020 021 024 025 034 038 041
English - 20
CABLE BOX
Brand Code
SAMSUNG 000 001 002 003 004 005 006 007 GI 041 HAMLIN 003 024 031 HITACHI 025 030 JERROLD 038 039 MACOM 025 030 MAGNAVOX 019 023 028 OAK 026 PANASONIC 003 022 027 037 044 PHILIPS 019 021 023 028 PIONEER 004 018 020 044 RCA 014 022 040 REGAL 003
SAMSUNG DVD
Product Code
DVD 000 001 002 DVDR 003 004 BD Record 005 006 VCR COMBO 007 008 009 010 011 VCR Record 012 DHR COMBO 013
DVD
Brand Code
ANAM 030 AUDIOVOX 075 AUDIOLOGIC 085 ANABA 072 APEX DIGITAL 070 071 074 086 083 084 088 111 112 AIWA 114 BROKSONIC 062 BLAUPUNKT 074 B&K 122 123 CURTIS MATHES 027 CYBER HOME 077 078 079 082 CLARION 080 125 CIRRUS 081 CYBER HOME 065 CINEVISION 095 DAEWOO 066 DENON 146 FARENHEIT 067 068 FISHER 090 GPX 060 GO VIDEO 061 089 133 135 GE 069 074 GREENHILL 074 HITACHI 064 113 HITEKER 071 HOYO 073 HARMAN / KARDON IRT 089
091 110
Brand Code
REGENCY 015 023 SA 042 043 SCIENTIFIC ATLAN 042 043 SPRUCER 022 STARGATE 2000 036 SYLVANIA 016 TEXSCAN 016 TOCOM 032 UNIVERSAL 033 034 VIEWSTAR 019 021 023 028 WARNER AMEX 046 ZENITH 017 029 035 037 045
Product Code
Home Theater VCR COMBO 014 015 016 HDD Recorder COMBO 017 TWIN TRAY COMBO 018 STB DVD COMBO 019 DVD Receiver 020 AV Receiver 021
Brand Code
INTEGRA 092 JBL 091 JVC 022 033 115 116 JATON 073 KENWOOD 051 108 109 KISS 073 KONKA 059 100 106 107 KLH 074 075 LG(Goldstar) 025 031 LOEWE 057 LASONIC 058 MOBILE AUTHORITY MEMOREX 055 MALATA 056 MAGNAVOX 076 093 MINTEK 074 094 MONYKA 073 NORCENT 048 049 050 NEXT BASE 052 NEC 053 NANTAUS 144 NESA 074 OPTOMEDIA ELECTRONICS OPTIVIEW 072 ONKYO 076 092 119 PHILCO 044 045 PRINCETON 046 047 PROSCAN 023
054
105
English - 21
DVD
Brand Code
PANASONIC 024 034 124 134 136 137 138 PHILIPS 036 076 ROTEL 117 118 RIO 120 RCA 023 035 074 075 131 132 RAITE 073 ROWA 038 SAMPO 104 SONY 026 029 126 127 128 129 130 141 SHERWOOD 039 041 SVA 042 SYLVANIA 043 093 SHARP 140 SANSUI 062 SANYO 062 090 SHINSONIC 094
SAMSUNG SET-TOP BOX
Product Code
Ground wave STB 001 002 Satellite STB 003 CABLE STB 004 STB DVD COMBO 008 Satellite STB HDD COMBO Standard 009
SET-TOP BOX
Brand Code
ALPHASTAR 023 ANAM 043 CHANNEL MASTER 018 034 CROSSDIGITAL 019 CHAPARRAL 035 DIRECT TV 015 016 017 019 022 045 060 061 062
DAEWOO 074 DISH NETWORK SYSTEM DISHPRO 069 DRAKE 018 024 032 DX ANTENNA 027 ECHOSTAR 025 069 070 071 EXPRESSVU 069 GOI 069 GE 065 GENERAL INSTRUMENT HTS 069 HOME CABLE 056 HITACHI 022 HUGHES NETWORK IQ 020 IQ PRISM 020 JANEIL 059 JERROID 063 JVC 069 070 LG(Goldstar) 044 073
065 066 067 068
069 070
046 047 048 063 064
015 017
Brand Code
THOMSON 145 TOSHIBA 028 062 076 TECHNICS 139 TVIEW 072 TOKAI 073 TEAC 096 TECHWOOD 097 TREDEX 098 099 101 URBAN CONCEPTS VENTURER 075 VOCOPRO 102 YAMAHA 032 063 YAMAKAWA 040 073 XWAVE 103 ZENITH 076 121
Product Code
Satellite STB HDD COMBO Premium 010 CABLE STB HDD COMBO Standard 011 CABLE STB HDD COMBO Premium 012 Ground wave STB HDD COMBO Standard 013 Ground wave STB HDD COMBO Premium 014
Brand Code
MAGNAVOX 016 021 036 038 039 040 041 042 MEMOREX 016 MOTOROLA 064 MACOM 018 MITSUBISHI 015 NEXT LEVEL 047 048 064 PHILIPS 015 016 017 021 033 036 038 039 040
PRIMESTAR 046 049 050 063 PANASONIC 058 059 061 062 PAYSAT 016 PROSCAN 065 066 RCA 051 052 053 065 066 RADIOSHACK 064 REALISTIC 057 STAR TRAK 026 STS 020 027 SKY 031 SKY LIFE 005 006 007 SHACK 064 STAR CHOICE 064 SONY 054 060 TOSHIBA 015 017 028 029 030 072 ULTIMATE TV 060 066 UNIDEN 016 021 037 055 056 057 ZENITH 024 031 068
076
041 042 067
English - 22
To Select the Source (depending on the model)
Use to select TV or other external input sources connected to the TV.
TV
Use to select the input source of your choice.
1.
Press the MENU button to display the menu.
Press the▲ or ▼ buttons to select “Input”, then press the ENTER button.
2.
Press the ENTER button to select “Source List”.
Press the ▲ or ▼ buttons to select signal source, then press the ENTER button.
When you connect equipment to the LCD, you can choose between the following sets of jacks: TV, AV1, AV2, S-Video1, S-Video2, Component1, Component2, PC, HDMI1, HDMI2, HDMI3 on the TV’s rear panel. HDMI1, HDMI2, HDMI3 input can only be selected when the external device is turned on and connected via HDMI. 23,26 inch model supports TV, AV1, AV2, S-Video1,S-Video 2, Component1, Component 2, PC, HDMI1, and HDMI2 only.
AV2/S-Video2/HDMI3 is placed on the side of the TV.
You can choose only those external devices that are connected to the TV.
Press the SOURCE button on the remote control to view an external signal source.
To Edit the Input Source Name (depending on the model)
Name the device connected to the input jacks to make your input source selection easier.
1. Press the MENU button to display the menu.
Press the▲ or ▼ buttons to select “Input”, then press the ENTER button. Press the ▲ or ▼ buttons to select “Edit Name”, then press the ENTER
button.
TV
Source List : TV Edit Name WISELINK Anynet+ (HDMI-CEC)
TV
AV1 : ---­AV2 : ---­S-Video1 : ---­S-Video2 : ---­Component1 : ---­Component2 : ----
▼More
Source List : TV Edit Name WISELINK Anynet+ (HDMI-CEC)
Input
Move Enter Return
Source ListTV
Move Enter Return
Input
2. Press the ▲ or ▼ buttons to select “AV1”, “AV2”, “S-Video1”, “S-Video2”,
"Component1”, “Component2”, “PC”, “HDMI1”, “HDMI2”, “HDMI3” input jack, then press the ENTER 23,26 inch model supports TV, AV1, AV2, S-Video1,S-Video 2, Component1,
button.
Component 2, PC, HDMI1, and HDMI2 only.
3.
Press the ▲ or ▼ buttons to select “VCR”, “DVD”, “D-VHS”, “Cable STB”, "HD STB”, “Satellite STB”, “PVR STB”, “AV Receiver”, “DVD Receiver”, "Game”, “Camcorder”, “DVD Combo”, “PC”, “VOD STB”, “TV” input source, then press the ENTER button. Press the EXIT button to exit.
English - 23
Move Enter Return
Edit NameTV
AV1 AV2 : ---­S-Video1 : ---­S-Video2 : ---­Component1 : ---­Component2 : ----
▼More
Move Enter Return
AV1
AV2 : ---- S-Video1 : ---- S-Video2 : ---- Component1 : ---- Component2 : ----
▼More
Move Enter Return
Edit NameTV
: ----
----
: ----
VCR DVD D-VHS Cable STB HD STB Satellite STB PVR STB

Picture Control

Using Automatic Picture Settings
Your TV has Three automatic picture settings ("Dynamic”, “Standard”, “Movie") that are preset at the factory. You can activate either Dynamic, Standard, Movie by making a selection from the menu.
1.
Press the MENU button to display the menu.
Press the ENTER button, to select “Picture”.
2.
Press the ENTER button to select “Mode”.
Press the ENTER button again. Press the ▲ or ▼ buttons to select the “Dynamic”, “Standard”, “Movie” picture setting. Press the ENTER button.
Choose Dynamic to increase the clarity and sharpness of the picture. Choose Standard for the standard factory settings. Choose Movie for a natural Image without picture enhancements.
3. Press the ▲ or ▼ buttons to select “Contrast”, “Brightness”, “Sharpness”, "Color”, or “Tint(G/R)”, then press the ENTER button.
Press the ◄ or ► buttons to decrease or increase the value of a particular item.
4.
For example, if you select “Contrast”, pressing the ► button increases it.
Press the EXIT
button to exit.
• When you make changes to Contrast, Brightness, Sharpness, Color, Tint(G/R) OSD will be also adjusted accordingly.
• When in PC mode, Tint, Sharpness, and Color are not available.
Mode : Dynamic Contrast 100 Brightness 45 Sharpness 75 Color 55 Tint G 50 R 50 Backlight 10
▼More
Move Enter Return
Mode : Dynamic
Contrast 100 Brightness 50 Sharpness 85 Color 55 Tint G 50 R 50 Backlight 10
▼More
Move Enter Return
Mode : Dynamic Contrast 100 Brightness 50 Sharpness 85 Color 55 Tint G 50 R 50 Backlight 10
▼More
Move Enter Return
Contrast
Move Adjust Return
PictureTV
PictureTV
Dynamic
Standard Movie
PictureTV
100
Press the P.MODE button on the remote control repeatedly to select the desired picture mode.
English - 24
Activating Backlight
You can adjust the screen brightness by adjusting the LCD backlight brightness. (0~10)
1. Press the MENU button to display the menu. Press the ENTER button, to select “Picture”.
2.
Press the ▲ or ▼ button to select “Backlight”, then press the ENTER button.
3.
Press the ◄ or ► button to decrease or increase the value of the backlight brightness. Press the ENTER button.
Press the EXIT button to exit.
Adjusting the Color Tone
You can change the color of the entire screen according to your preference.
1.
Press the MENU button to display the menu. Press the ENTER button to select “Picture”.
2. Press the ▲ or ▼ buttons to select “Color Tone”, then press the ENTER button.
3. Press the ▲ or ▼ buttons to select “Cool2”, “Cool1”, “Normal”, “Warm1”,
or “Warm2”. Press the ENTER button.
When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected. Movie mode is only available .
Mode : Dynamic Contrast 100 Brightness 50 Sharpness 85 Color 55 Tint G 50 R 50 Backlight 10
▼More
Backlight
▲More
Color Tone : Cool2
Detailed settings
Size : 16 : 9 Digital NR : Low Active Color : On DNle : On Reset : OK
▲More
Color Tone : Cool1
Detailed settings
Size : 16 : 9 Digital NR : Low Active Color : On DNle : On Reset : OK
PictureTV
Move Enter Return
Move Adjust Return
PictureTV
Move Enter Return
PictureTV
Cool2
Cool1 Normal
Warm1 Warm2
Move Enter Return
0
► ► ► ►
Resetting the Picture Settings to the Factory Defaults
Press the ▲ or ▼ buttons to select “Reset”, then press the ENTER button.
1.
Press the ▲ or▼ button to select “OK”, or “Cancel”, then press the ENTER button. Press the EXIT
button to exit.
Each mode can be reset.
English - 25
▲More
Color Tone : Cool1
Detailed settings
Size : 16 : 9 Digital NR : Low Active Color : On DNle : On
Reset : OK
PictureTV
OK
Cancel
Move Enter Return
Adjusting the Detailed Settings
You can set detail picture settings.
Activating Detailed Settings
1. Press the MENU button to display the menu. Press the ENTER button, to select “Picture”.
2.
Press the ENTER button to select “Mode”
Press the ▲ or ▼ buttons to select “Movie”, then press the ENTER button.
3.
Press the ▲ or ▼ buttons to select “Detailed settings”,
then press the ENTER button. Picture Mode is available in Standard or Movie mode. If DNIe is Off, the Detailed Settings cannot be selected when the Picture mode is in Standard mode.
Activating Black adjust
You can directly select the black level on the screen to adjust the screen depth.
Press the ▲ or ▼ button to select “Black adjust”, then press the ENTER
4.
button.
Press the ▲ or ▼ button to select “Off”,“Low”,“Medium”,“High”.
5. Press the ENTER button.
Off: Turns off the black adjustment function.  Low: Sets the black color depth to low.  Medium: Sets the black color depth to medium.  High: Sets the black color depth to high.
Mode : Movie Contrast 80 Brightness 45 Sharpness 20 Color 45 Tint G 50 R 50 Backlight 5
▼More
Move Enter Return
▲More
Color Tone : Warm2 Detailed settings Size : 16 : 9 Digital NR : Low
Active Color : On DNle : On
Reset : OK
Move Enter Return
Black Adjust : Off Dynamic Contrast : Off Gamma : Color Space : Auto White Balance My Color Control Edge Enhancement : Off
Move Enter Return
TV
Black Adjust : Off
Dynamic Contrast : Off Gamma : 0 Color Space : Auto White Balance My Color Control Edge Enhancement : Off
Move Enter Return
PictureTV
PictureTV
Detailed SettingsTV
0
Detailed Settings
Off
Low Medium High
► ► ► ►
► ►
► ►
► ► ► ►
Activating Dynamic Contrast
You can adjust the screen contrast so that the optimal contrast is provided.
Press the ▲ or ▼ button to select “Dynamic Contrast”, then press the ENTER
6.
button.
7.
Press the ▲ or ▼ button to select “Off”,“Low”,“Medium”,“High”.
Press the ENTER button.
Off: Turns off the dynamic contrast adjustment function.  Low: Sets the dynamic contrast to low.  Medium: Sets the dynamic contrast to medium.  High: Sets the dynamic contrast to high.
English - 26
Detailed SettingsTV
Black Adjust : Off Dynamic Contrast : Off Gamma : 0 Color Space : Auto White Balance My Color Control Edge Enhancement : Off
Move Enter Return
Detailed SettingsTV
Black Adjust : Off
Dynamic Contrast : Off
Gamma : 0 Color Space : Auto White Balance My Color Control Edge Enhancement : Off
Move Enter Return
Off
Low Medium High
► ►
► ► ► ►
Activating Gamma
You can adjust the middle brightness of pictures. (-3 ~ 3)
8.
Press the ▲ or ▼ button to select “Gamma”, then press the ENTER
button.
9.
Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
Detailed SettingsTV
Black Adjust : Off Dynamic Contrast : Off Gamma : Color Space : Auto White Balance My Color Control Edge Enhancement : Off
Move Enter Return
0
► ►
► ► ► ►
Changing the Color Space
Color space is a color matrix composed of red, green, and blue colors. Select your favorite color space to and experience the most natural color.
10.
Press the ▲ or ▼ button to select “Color Space”, then press the ENTER button. Press the ▲ or ▼ button to select “Wide” or “Auto”.
11. Press the ENTER button.
Wide : Wide Color Space offers deep and rich color tone.  Auto : Auto Color Space automatically adjusts to the most natural color tone based on
program sources.
Activating White Balance
You can adjust the color temperature for more natural picture colors.
Press the ▲ or ▼ button to select “White Balance”, then press the ENTER
12.
button.
Select the required option by pressing the ▲ or ▼ button, then press the
13. ENTER button.
14.
Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
R offset: Adjusts the red color darkness.  G offset: Adjusts the green color darkness.  B offset: Adjusts the blue color darkness.  R gain: Adjusts the red color brightness.  G gain: Adjusts the green color brightness.  B gain: Adjusts the blue color brightness.  Reset: The previously adjusted white balance will be reset to the factory defaults.
Changing the adjustment value will refresh the adjusted screen.
Gamma
Adjust Return
Black Adjust : Off Dynamic Contrast : Off Gamma : Color Space : Auto White Balance My Color Control Edge Enhancement : Off
Move Enter Return
Black Adjust : Off Dynamic Contrast : Off Gamma :
Color Space : Auto
White Balance My Color Control Edge Enhancement : Off
Move Enter Return
Black Adjust : Off Dynamic Contrast : Off Gamma : Color Space : Auto White Balance My Color Control Edge Enhancement : Off
Move Enter Return
R-Offset 15 G-Offset 15 B-Offset 15 R-Gain 15 G-Gain 15 B-Gain 15 Reset
Move Enter Return
R-Offset
Move Adjust Return
0
Detailed SettingsTV
0
Detailed SettingsTV
0
Detailed SettingsTV
0
White BalanceTV
Auto
Wide
► ►
► ► ► ►
► ►
► ► ► ►
15
English - 27
Activating My Color Control
This setting can be adjusted to suit your personal preferences. When using the My Color Control Feature, the current picture remains in movement.
15.
Press the ENTER button to select “My Color Control”.
16.
Press the ▲ or ▼ button to select “Pink”,“Green”,“Blue”,“White”,“Reset”.
Press the ENTER button.
17.
Press the ◄ or ► button to decrease or increase the value of a particular item.
Press the ENTER button.
Pink: Darkens or lightens the pink color  Green: Darkens or lightens the green color  Blue: Darkens or lightens the blue color  White: Darkens or lightens the white color  Reset: The previously adjusted colors will be reset to the factory defaults.
Changing the adjustment value will refresh the adjusted screen.
Pink
Detailed SettingsTV
Black Adjust : Off Dynamic Contrast : Off Gamma : Color Space : Auto White Balance My Color Control Edge Enhancement : Off
Move Enter Return
Pink 15 Green 15 Blue 15 White 15 Reset
Move Enter Return
Move Adjust Return
0
My Color ControlTV
15
► ►
► ► ► ►
Activating Edge Enhancement
You can emphasize object boundaries in the picture.
18. Press the ▲ or ▼ button to select “Edge Enhancement”, then press the ENTER button.
19.
Press the ▲ or ▼ button to select “Off” or “On”.
Press the ENTER button. Press the EXIT
button to exit.
Detailed SettingsTV
Black Adjust : Off Dynamic Contrast : Off Gamma : Color Space : Auto White Balance My Color Control Edge Enhancement : Off
Move Enter Return
Black Adjust : Off Dynamic Contrast : Off Gamma : Color Space : Auto White Balance My Color Control
Edge Enhancement : O
Move Enter Return
0
Detailed SettingsTV
0
ff
Off
On
► ►
► ► ► ►
English - 28
Loading...
+ 161 hidden pages