Samsung LNS3296DX-XAA User Manual [en, es, fr]

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung.

Contacte con SAMSUNG WORLD-WIDE

Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente.

LN-S3296D

TFT-LCD TELEVISION

Country

CANADA

U.S.A

Customer Care Center

1-800-SAMSUNG (7267864)

Web Site

www.samsung.com/ca

www.samsung.com

Address

Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada

Samsung Electronique Canada Inc., Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada

Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511

la Clientéle

BN68-01047H-00

Owner’s Instructions

This device is a Class B digital apparatus. Register your product at

www.samsung.com/global/register

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screen

• Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

Précautions à prendre lors de l'affichage d'une image fixe

Une image fixe peut causer des dommages irrémédiables à l'écran du téléviseur.

• N'affichez pas une image fixe sur l'écran LCD plus de 2 heures. Cela pourrait provoquer une rémanence de l'image à l'écran. Cette rémanence de l'image est également appelée "brûlure de l'écran". Pour éviter une telle rémanence de l'image à l'écran, réduisez la luminosité et le contraste de l'écran lorsque vous laissez une image fixe affichée.

• Regarder l'écran LCD du téléviseur en format 4:3 pendant une longue période peut laisser des traces de bordures à gauche,

• L'affichage d'images fixes de jeux vidéo et d'ordinateurs pendant plus longtemps qu'une période spécifique peut provoquer des rémanences.

Pour éviter cela, réduisez la "luminosité" et le "contraste" lors de l'affichage d'images fixes.

Precauciones al mostrar en la pantalla una imagen fija

La imagen fija puede causar daños permanentes en la pantalla del televisor.

• No deje una imagen fija en la pantalla LCD durante más de dos horas ya que se podría producir una retención de la imagen en la pantalla. Este fenómeno de retención de imágenes también se denomina "quemadura de pantalla". Para evitar que se produzca esa persistencia de la imagen, reduzca el nivel de luminosidad y de contraste de la pantalla cuando muestre imágenes fijas.

• El uso del televisor LCD en formato 4:3 durante un tiempo prolongado puede dejar rastros de bordes en las partes izquierda,

• Ver imágenes fijas de videojuegos y PC durante más tiempo del indicado puede producir restos de imágenes parciales.

Para evitar este efecto, reduzca el 'brillo' y el 'contraste' cuando vea imágenes fijas.

caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

à droite et au centre de l'écran, à cause de la différence d'émission de lumière sur l'écran. La lecture d'un DVD ou l'utilisation d'une console de jeu peut avoir un effet similaire sur l'écran. Les dommages provoqués par les effets qui précèdent ne sont pas couverts par la garantie.

derecha y central de la pantalla debido a las diferencias en la emisión lumínica de la pantalla. La reproducción de un DVD o el uso de una consola de videojuegos pueden provocar un efecto similar en la pantalla. Reproducir un DVD o una videoconsola puede causar un efecto similar en la pantalla. La garantía no cubre estos daños.

GENERAL INFORMATION

List of Features .................................................................................. 2

Accessories........................................................................................ 2

Viewing the Control Panel.................................................................. 3

Viewing the Connection Panel ........................................................... 4

Remote Control .................................................................................. 6

Installing Batteries in the Remote Control ......................................... 7

CONNECTIONS

Connecting VHF and UHF Antennas ................................................. 7

Connecting Cable TV ......................................................................... 8

Connecting a VCR ............................................................................. 9

Connecting an S-VHS VCR ............................................................... 9

Connecting a Camcorder ................................................................... 10

Connecting a DVD Player .................................................................. 10

Connecting a DVD Player/Set-Top Box via DVI ................................ 10

Connecting a DVD Player/Set-Top Box via HDMI ............................. 11

Connecting a Digital Audio System.................................................... 11

Connecting an Amplifier/DVD Home Theater .................................... 12

Connecting a PC................................................................................ 12

English

CHANNEL CONTROL

Selecting the Antenna................................................................... 32

Setting the Channel Manager ....................................................... 32

To set-up Your Favorite Channels ............................................... 33

Using the Channel Lists................................................................ 34

Viewing the Channel Lists ............................................................ 34

Labeling Channels ....................................................................... 35

Fine Tuning Analog Channels....................................................... 35

Checking the Digital-Signal Strength ............................................ 36

LNA (Low Noise Amplifier)............................................................ 36

PC DISPLAY

Using Your TV as a Computer (PC) Display ................................ 37

Display Modes .............................................................................. 37

Setting up the TV with your PC .................................................... 38

TIME SETTING

Setting the Clock .......................................................................... 40

OPERATION

Turning the TV On and Off ............................................................... 13

Plug & Play Feature ........................................................................... 13

Changing Channels ........................................................................... 14

Adjusting the Volume ......................................................................... 15

Viewing the Display............................................................................ 15

Viewing the Menus............................................................................. 15

Memorizing the Channels .................................................................. 16

Setting Up Your Remote Control........................................................ 17

To Select the Source ......................................................................... 22

To Edit the Input Source Name ......................................................... 22

PICTURE CONTROL

Using Automatic Picture Settings ................................................. 23

Adjusting the Color Tone .............................................................. 24

DNIe Demo(Digital Natural Image engine)................................... 24

Changing the Screen Size ............................................................ 25

Freezing the Picture ..................................................................... 26

Viewing Picture-in-Picture............................................................. 26

SOUND CONTROL

Customizing the Sound ................................................................ 28

Using Automatic Sound Settings ................................................. 28

Setting the TruSurround XT.......................................................... 28

Choosing a Multi-Channel Sound (MTS) track - Digital .............. 29

Choosing a Multi-Channel Sound (MTS) track - Analog ............. 29

Selecting the Internal Mute ........................................................... 30

Automatic Volume Control ........................................................... 30

Setting the On/Off Melody ............................................................ 31

Listening to the Sound of the Sub (PIP) Picture .......................... 31

FUNCTION DESCRIPTION

Selecting a Menu Language ......................................................... 43

Setting the Blue Screen Mode...................................................... 43

Selecting the Film Mode ............................................................... 44

Digital Noise Reduction ................................................................ 44

Using the Game Mode.................................................................. 44

Viewing Closed Captions (On-Screen Text Messages) - Analog Viewing Closed Captions (On-Screen Text Messages) - Digital .. 46

Menu Transparency Level ............................................................ 47

Using the Energy Saving Feature ................................................ 47

Setting the Function Help ............................................................ 48

Using the V-Chip........................................................................... 48

APPENDIX

Identifying Problems .................................................................... 55

Installing the Stand ....................................................................... 56

Disconnecting the Stand............................................................... 56

Installing the Wall Mount Kit ........................................................ 57

Using the Anti-Theft Kensington Lock .......................................... 58

Specifications................................................................................ 58

... 45

Symbol Press Important Note One-Touch

Button

English-1

General Information

List of Features

 Adjustable picture settings that can be stored in the TV’s memory.  Automatic timer to turn the TV on and off.  A special sleep timer.  V-Chip function.  Excellent Digital Interface & Networking

With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Set-Top Box needed.

 Remote Control

The supplied remote can be used to operate the TV as well as most DVD players, Set-top boxes, Cable Boxes and VCRs.

 Excellent Picture Quality

DNIe technology provides life-like clear images.

 SRS TruSurround XT

SRS TruSurround XT provides a virtual Dolby surround system.

Accessories

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

Remote Control & Batteries (AAA x 2)

(BN59-00511A)

Stand

(BN96-03419A)

Power Cord

(3903-000144)

M4 X L16

Screw

(6002-001294)

Cleaning Cloth

(BN63-01798A)

Owner’s Instructions Warranty Card / Registration Card

Cover-Bottom

(BN63-02535A)

/Safety Guide Manual

(Not available in all locations)

English-2

Viewing the Control Panel

VOL

Buttons on the Lower-Right Part of the Panel

The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.

The product color and shape may vary depending on the model.

SOURCE

Toggles between all the available input sources (TV, AV1, AV2, S-Video1, S-Video2, Component, PC, HDMI1, HDMI2). In the on-screen menu, use this button as you would use the ENTER button on the remote control.

Press to see an on-screen menu of your TV’s features.

Press to change channels. In the on-screen menu, use the buttons as you would use the

SPEAKERS

Press to turn the TV on and off.

POWER INDICATOR

Blinks and turns off when the power is on and lights

Press to decrease or increase the volume. In the on-screen menu, use the buttons as you would use the

 and  buttons on the remote control.

up in stand-by mode.

REMOTE CONTROL SENSOR

Aim the remote control towards this spot on the TV.

English-3

 and  buttons on the remote control.

(POWER)

Viewing the Connection Panel

Rear Panel Jacks

Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For more information on connecting equipment, see pages 7-12.

AV IN 1

Video and audio inputs for external devices, such as a camcorder or VCR.

S-VIDEO IN 1

Connect an S-Video signal from a camcorder or VCR.

AUDIO OUT(R/L)

Connect to the audio input jacks on your Amplifier/ Home theater.

DIGITAL AUDIO OUT (OPTICAL)

Connect to a Digital Audio component.

SERVICE 1/SERVICE 2

Connector for service only.

HDMI/DVI IN 1/2, DVI IN(AUDIO-R/L)

Connect to the HDMI jack of a device with an HDMI output. Use the HDMI/DVI terminal for DVI connection to an external device. You should use the DVI to HDMI cable or DVI-HDMI adapter (DVI to HDMI) for video connection, and the DVI-IN ‘R-AUDIO-L’ terminal for audio.

- HDMI/DVI IN terminal does not support PC.

- No sound connection is needed for an HDMI to HDMI connection.

ANT 1 IN/ANT 2 IN

Connect to an antenna or cable TV system.

PC IN

Connect to the video and audio output jacks on your PC.

COMPONENT IN

Connect Component video/audio.

POWER INPUT

Connect the supplied power cord.

KENSINGTON LOCK

The Kensington lock (optional) is a device used to physically fix the system when used in a public place. If you want to use a locking device, contact the dealer where you purchased the TV.

The place of the Kensington Lock may be different depending on its model.

English-4

Side Panel Jacks

Use the left side panel jacks to connect a component that is used only occasionally, such as a camcorder or video game. (See page 10)

AV IN 2

Video and audio inputs for external devices.

S-VIDEO IN 2

Video inputs for external devices with an S-Video output.

HEADPHONE

Connect a set of external headphones for private listening.

English-5

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player, or Set-Top Box.

POWER

Turns the TV on and off.

NUMERIC BUTTONS

Press to change the channel.

–

Press to select additional channels (digital and analog) being broadcast by the same station. For example, to select channel “54-3”, press “54”, then

–

” and “3”.

press “

CH MGR

Used to display Channel Lists on the screen.

ANTENNA

Press to select “AIR” or “CABLE”.

VCR/DVD Functions

- Rewind

- Stop

- Play/Pause

- Fast/Forward

VOL / VOL

Press to increase or decrease the volume.

(

MUTE)

Press to temporarily cut off the sound.

Displays the main on-screen menu.

S.MODE

Sound mode selection.

PIP

Picture-in Picture ON/OFF.

P.MODE

Picture effect selection.

SRS

Selects SRS TruSurround XT mode.

MTS

Press to choose stereo, mono or Separate Audio Program (SAP broadcast).

AUTO PROG.

Press to automatically store selected Air/Cable channels.

ADD/DEL

Use to store and delete channels to/from memory.

SET

Sets the remote to control your TV, VCR, Cable, DVD, or Set-Top Box

This is a special remote control for the visually impaired, and has Braille points on the Power, Channel, Volume, Stop and Play/Pause buttons.

TV, DVD, STB, CABLE, VCR

Press to operate your TV, DVD, STB, CABLE (box), or VCR

SOURCE

Press to display all of the available video sources.

PRE-CH

Tunes to the previous channel.

FAV.CH

Press to switch to your favorite channels.

E.SAVING

Adjusts screen brightness to save energy.

CH / CH

Press to change channels.

EXIT

Press to exit the menu.

UP / DOWN / LEFT /

RIGHT / ENTER

Use to select on-screen menu items and change menu values.

INFO

Press to display information on the TV screen.

SLEEP

Press to select a preset time interval for automatic shut off.

STILL

Press to stop the action during a particular scene. Press again to resume normal video.

P.SIZE

Picture size selection.

SWAP

Switches the main and sub (PIP) picture.

Displays the available channels in sequence. (These buttons change channels in the PIP window only.)

CAPTION

Controls the caption decoder.

RESET

When your remote does not work, change the batteries and press the RESET button for 2-3 seconds before use.

English-6

Installing Batteries in the Remote Control

1. Lift the cover at the back of the remote control upward as shown in the figure.

2. Install two AAA size batteries.

Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.

3. Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

Connections

Connecting VHF and UHF Antennas

If your antenna has a set of leads that look like this, see “Antennas with 300 ΩFlat Twin Leads” below.

If your antenna has one lead that looks like this, see “Antennas with 75 ΩRound Leads”. If you have two antennas, see “Separate VHF and UHF Antennas”.

Antennas with 300 Ω Flat T

win Leads

If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300 Ωtwin flat leads, follow the directions below.

1. Place the wires from the twin leads under the screws on a 300-75Ωadapter (not supplied). Use a screwdriver to tighten the screws.

ANT 2 IN (CABLE)

2. Plug the adaptor into the ANT 2 IN (CABLE) terminal on the back of the TV.

Antennas with 75 Ω Round Leads

ANT 1 IN

(AIR)

1. Plug the antenna lead into the ANT 1 IN (AIR) terminal on the back of the TV.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).

1. Connect both antenna leads to the combiner.

UHF

VHF

2. Plug the combiner into the ANT 1 IN (AIR) terminal on the bottom of the rear panel.

ANT 1 IN

(AIR)

UHF

VHF

English-7

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

ANT 2 IN (CABLE)

Connecting to a Cable Box that Descrambles All Channels

ANT IN

ANT OUT

1. Plug the incoming cable into the ANT 2 IN (CABLE) terminal on the back of the TV.

Because this TV is cable-ready, you do not need a cable box to view unscrambled cable channels.

1. Find the cable that is connected to the ANT OUT terminal on your cable box.

This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

ANT 2 IN (CABLE)

2. Connect the other end of this cable to the ANT 2 IN (CABLE) terminal on the back of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of RF cable. (These items are available at most electronics stores.)

1. Find and disconnect the cable that is

ANT IN

Incoming

cable

Incoming

cable

Incoming

cable

Splitter

cable

Splitter

Cable Box

Splitter

RF (A/B)

Switch

Cable Box

RF (A/B)

Switch

RF (A/B)

Switch

ANT 2 IN

(CABLE)

TV Rear

After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

connected to the ANT IN terminal on your cable box.

This terminal might be labeled “ANT IN”, “VHF IN” or simply, “IN”.

2. Connect this cable to a two-way splitter.

3. Connect an RF cable between an OUTPUT

terminal on the splitter and the IN terminal on the cable box.

4. Connect an RF cable between the ANT OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.

5. Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.

6. Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANT 2 IN (CABLE) terminal on the rear of the TV.

English-8

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 7-8). Skip step 1 if you have not yet connected to an antenna or a cable system.

ANT 2 IN

ANT 1 IN

(CABLE)

(AIR)

TV Rear Panel

VCR Rear Panel

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

Each external input source device has a different back panel configuration. When connecting an external device, match the color of the connection terminal to the cable.

Audio Cable (Not supplied)

Video Cable (Not supplied)

RF Cable (Not supplied)

1. Unplug the cable or antenna from the back of the TV.

2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR.

3. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT 1 IN (AIR) or ANT 2 IN (CABLE) terminal on the TV.

4. Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV IN 1 [VIDEO] jack on the TV.

5. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 1 [R-AUDIO-L] jacks on the TV.

If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables.

Connecting an S-VHS VCR

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.)

TV Rear Panel

VCR Rear Panel

Audio Cable (Not supplied)

S-Video Cable (Not supplied)

RF Cable (Not supplied)

An S-Video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.)

Each external input source device has a different back panel configuration. When connecting an external device, match the color of the connection terminal to the cable.

English-9

1. To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV.

2. Connect an S-Video Cable between the S-VIDEO OUT jack on the VCR and the AV IN1 [S-VIDEO] jack on the TV.

3. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN1 [R-AUDIO-L] jacks on the TV.

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR

TV Side Panel

S-Video Cable (Not supplied)

Video Cable (Not supplied)

Camcorder

Each external input source device has a different back panel configuration. When connecting an external device, match the color of the connection terminal to the cable.

Audio Cable (Not supplied)

Connecting a DVD Player

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.

DVD Player Rear Panel

Audio Cable (Not supplied)

Component Cable (Not supplied)

TV Rear Panel

1. Connect a Video Cable (or S-Video Cable )between the AV IN2 [VIDEO] (or S-VIDEO) jack on the TV and the VIDEO OUT jack on the camcorder.

2. Connect Audio Cables between the AV IN 2 [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the camcorder.

1. Connect a Component Cable between the COMPONENT IN [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB, PR] jacks on the DVD player.

2. Connect Audio Cables between the COMPONENT IN [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the DVD player.

Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr (Red) for enhanced video quality. Be sure to match the component video and audio connections. For example, if connecting the video cable to COMPONENT IN, connect the audio cable to COMPONENT IN also. Each external input source device has a different back panel configuration. When connecting an external device, match the color of the connection terminal to the cable.

Connecting a DVD Player/Set-Top Box via DVI

This connection can only be made if there is a DVI Output connector on the external device.

DVD Player / Set-Top Box

Audio Cable (Not supplied)

DVI to HDMI Cable (Not supplied)

Each external input source device has a different back panel configuration. When connecting an external device, match the color of the connection terminal to the cable.

TV Rear Panel

1. Connect a DVI to HDMI Cable or DVI-HDMI Adapter between the HDMI/DVI IN 1 or HDMI/DVI IN 2 connector on the TV and the DVI connector on the DVD player/Set-Top Box.

2. Connect Audio Cables between the DVI IN [R-AUDIO-L] jack on the TV and the AUDIO OUT jacks on the DVD player/ Set-Top Box.

English-10

Connecting a DVD Player/Set-Top Box via HDMI

This connection can only be made if there is an HDMI Output connector on the external device.

DVD Player Rear Panel

HDMI Cable (Not supplied)

What is HDMI?

• HDMI, or high-definition multimedia interface, is a next-generation interface that enables the transmission of digital audio and video signals using a single cable without compression.

• “Multimedia interface” is a more accurate name for it especially because it allows multiple channels of digital audio (5.1 channels). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi-channel digital audio.

Each external input source device has a different back panel configuration. When connecting an external device, match the color of the connection terminal to the cabl

TV Rear Panel

1. Connect an HDMI Cable between the HDMI/DVI IN 1 or HDMI/DVI IN 2 connector on the TV and the HDMI connector on the DVD player/Set-Top Box.

Connecting a Digital Audio System

The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.

Digital Audio System

TV Rear Panel

Optical Cable (Not supplied)

5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH. Sound delay could be observed when user hook up external amp. through optical output.

1. Connect an Optical Cable between the DIGITAL AUDIO OUT (OPTICAL) jacks on the TV and the Digital Audio Input jacks on the Digital Audio System.

When a Digital Audio System is connected to the “DIGITAL AUDIO OUT (OPTICAL)” terminal: Decrease the gain (volume) of the TV, and adjust the volume level with the system’s volume control.

English-11

Connecting an Amplifier/DVD Home Theater

Amplifier/DVD Home Theater

Audio Cable (Not supplied)

Each external input source device has a different back panel configuration. When connecting an external device, match the color of the connection terminal to the cable.

TV Rear Panel

Connecting a PC

1. Connect Audio Cables between the AUDIO OUT [R-AUDIO-L] on the TV and AUDIO IN [R-AUDIO-L] on the Amplifier/DVD Home Theater.

When an audio amplifier is connected to the “AUDIO OUT [L-AUDIO-R]” terminals: Decrease the gain (volume) of the TV, and adjust the volume level with the Amplifier’s volume control.

TV Rear Panel

PC Audio Cable (Not supplied)

D-Sub Cable (Not supplied)

Each external input source device has a different back panel configuration. When connecting an external device, match the color of the connection terminal to the cable.

The HDMI/DVI jacks do not support PC connection.

Internal Speakers

Internal Mute Off

Internal Mute On

Video No Signal

When “Internal mute” is set to “On”, Sound menus except “Multi-Track Options” cannot be adjusted.

Speaker Output

Mute

AV, S-Video

Speaker Output

Mute

Component, PC, HDMI

Speaker Output

Mute

Sound Output

Audio Out (Optical, L/R Out)

Mute

1. Connect a D-Sub Cable between PC IN [PC] connector on the TV and the PC output connector on your computer.

2. Connect a PC Audio Cable between PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer.

AV, S-Video

Sound Output

Mute

Component, PC, HDMI

Sound Output

Mute

English-12

Operation

Turning the TV On and Off

Press the POWER button on the remote control. You can also use the POWER button on the front of the panel.

Plug & Play Feature

When the TV is initially powered on, two basic customer settings proceed automatically and subsequently:

1. Press the POWER button on the remote control.

The message “Menu language, Channels and Time will be set.” is displayed. Press the ENTER button, then “Select the language of the OSD” menu is automatically displayed.

2. Press the ENTER button to enter the language.

Press the “Select the antennas to memorize.” menu is automatically displayed.

 or  buttons to select language, then the ENTER button.

3. Press the  or  buttons to memorize the channels of the selected connection.

Press the ENTER button to select “Start”.

If the antenna is connected to ANT 1 (AIR), select “Air” and if it is connected to ANT 2 (CABLE), select “Cable”. If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the “Air + Cable”.

In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the Contact your local cable company to identify the type of cable system that exists in your particular area.

 or  button, then press the ENTER button.

4. The TV will begin memorizing all of the available channels. After all the available channels are stored, the Auto program menu reappears. Press the

ENTER button when channel memorization is complete.

“Select the clock mode.” menu is automatically displayed.

To stop the search before it has finished, press the ENTER button with stop selected.

5. Press the ENTER button. Press the  or  buttons to select “Manual” or “Auto”, then the ENTER button. Switches the Daylight Saving Time function on or off.

English-13

continued...

6. Press the ENTER button. Press the  or  buttons to select “Yes” or “No”, then the ENTER button. “Select the time zone in which you live” menu is automatically displayed.

7. Press the  or  buttons to highlight the time zone for your local area (and to move the highlight to the appropriate time zone on the map of the United States). Press the ENTER button. If you have received a digital signal, the time will be set automatically. If not, see page 40 to set the clock.

8. The message “Enjoy your watching.” is displayed. When you have finished, press the ENTER button.

If you want to reset this featur

Changing Channels

Using the Channel Buttons

e...

1. Press the MENU button. Press the  or  buttons to select “Setup”, then press the ENTER button.

2. Press the  or  buttons to select “Plug & Play”. Press the ENTER button. For further details on setting up options, refer to the previous page.

Plug & Play can only be accessed in the TV mode.

1. Press the CH or CH button to change channels.

When you press the CH or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels). You will not see channels that were either erased or not memorized. See page 16 to memorize channels.

Using the PRE-CH Button to select the Previous Channel

1. Press the PRE-CH button.

The TV will switch to the last channel viewed.

To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then use the quickly alternate between them.

English-14

PRE-CH button to

Adjusting the Volume

1. Press the

Using Mute At any time, you can cut off the sound using the MUTE button.

1. Press MUTE and the sound cuts off. The word “ ” will appear in the lower-left corner of the screen.

2. To turn mute off, press the MUTE button again, or simply press the VOL or VOL

VOL or VOL

buttons.

buttons to increase or decrease the volume.

Viewing the Display

The display identifies the current channel and the status of certain audio-video settings.

1. Press the INFO button on the remote control.

The TV will display the channel, the type of sound, and the status of certain picture and sound settings.

The screen displays disappear after about ten seconds.

Viewing the Menus

Press the INFO button once more or wait approximately 10 seconds and it disappears automatically.

1. With the power on, press the MENU button. The main menu appears on the screen. Its left side has five icons: Input, Picture, Sound, Channel, Setup.

2. Use the  or  buttons to select one of the five icons. Then press the ENTER button to access the icon’s sub-menu.

3. Press the EXIT button to exit.

The on-screen menus disappear from the screen after about two minutes.

English-15

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH or CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic).

Selecting the Video Signal-sour

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an antenna or a cable system).

1. Press the MENU button to display the menu. Press the  or  buttons to select “Channel”, then press the ENTER button.

2. Press the ENTER button select “Antenna”. Press the  or  buttons to select “Air” or “Cable”, then press the ENTER button.

Press the

EXIT button to exit.

Storing Channels in Memory (Automatic Method)

1. Press the MENU button to display the menu. Press the  or  buttons to select “Channel”, then press the ENTER button.

2. Press the  or  buttons to select “Auto Program”, then press the ENTER button.

3. Press the  or  buttons to select the antenna connection, then press the ENTER button.

Air: “Air” antenna signal. / Cable: “Cable” antenna signal. / Air+Cable: “Air” and “Cable” antenna signals.

4. After all the available channels are stored, the “Auto Program” menu reappears. Press the

Alternately, you can press the AUTO PROG. button on the remote control to bring up the Auto Program menu.

EXIT button to exit.

English-16

Setting Up Your Remote Control

After it has been set up properly, your remote control can operate in five different modes: TV, VCR, Cable, DVD, or Set-Top Box. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose.

The remote control might not be compatible with all DVD Players, VCRs, Cable boxes, and Set-Top Boxes.

Setting Up the Remote to Operate Your VCR

Turn off your VCR.

Press the VCR button on your TV’s remote control.

Press the SET button on your TV’s remote control.

Using the number buttons on your remote control, enter three digits of the VCR code listed on page 19 of this manual for your brand of VCR. Make sure you enter three digits of the code, even if the first digit is a “0”. (If more than one code is listed, try the first one.)

Press the POWER button on the remote control. Your VCR should turn on if your remote is set up correctly.

If your VCR does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of VCR. If no other codes are listed, try each VCR code, 000 through 080.

Note on Using Remote Control Modes: VCR When your remote control is in “VCR” mode, the volume buttons still control your TV’s volume.

Setting Up the Remote to Operate Your Cable Box

Turn off your cable box.

Press the CABLE button on your TV’s remote control.

Press the SET button on your TV’s remote control.

Using the number buttons on your remote control, enter three digits of the cable box code listed on page 20 of this manual for your brand of cable box. Make sure you enter three digits of the code, even if the first digit is a “0”. (If more than one code is listed, try the first one.)

Press the POWER button on the remote control. Your cable box should turn on if your remote is set up correctly.

If your cable box does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of cable box. If no other codes are listed, try each code, 000 through 046.

Note on Using Remote Control Modes: Cable Box When your remote control is in “CATV” mode, the volume buttons still control your TV’s volume.

English-17

Setting Up the Remote to Operate Your DVD

Turn off your DVD.

Press the DVD button on your TV’s remote control.

Press the SET button on your TV’s remote control.

Using the number buttons on your remote control, enter three digits of the DVD code listed on page 20~21 of this manual for your brand of DVD. Make sure you enter three digits of the code, even if the first digit is a “0”. (If more than one code is listed, try the first one.)

Press the POWER button on the remote control. Your DVD should turn on if your remote is set up correctly.

If your DVD does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of DVD. If no other codes are listed, try each code, 000 through 141.

Note on Using Remote Control Modes: DVD When your remote control is in “DVD” mode, the volume buttons still control your TV’s volume.

Setting Up the Remote to Operate Your Set Top Box

Turn off your STB.

Press the STB button on your TV’s remote control.

Press the SET button on your TV’s remote control.

Using the number buttons on your remote control, enter three digits of the STB code listed on page 21 of this manual for your brand of STB. Make sure you enter three digits of the code, even if the first digit is a “0”. (If more than one code is listed, try the first one.)

Press the POWER button on the remote control. Your STB should turn on if your remote is set up correctly.

If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of STB. If no other codes are listed, try each code, 000 through 074.

Note on Using Remote Control Modes: STB When your remote control is in “STB” mode, the volume buttons still control your TV’s volume.

English-18

Remote Control Codes

VCR

Brand

SAMSUNG

ADMIRAL

AIWA

AKAI

AUDIO DYNAMICS

BELL&HOWELL

BROKSONIC

CANDLE

CANON

CITIZEN

COLORTYME

CRAIG

CURTIS MATHES

DAEWOO

DIMENSIA

DYNATECH

ELECTROHOME

EMERSON

FISHER

FUNAI

GENERAL ELECTRIC

GO VIDEO

HARMAN KARDON

HITACHI

INSTANT REPLAY

JC PENNEY

JCL

JVC

KENWOOD

KLH

KONIA

LG(Goldstar)

LIOYD

LOGIK

LXI

MAGNAVOX

MARANTZ

MARTA

MEI

MEMOREX

MGA

MIDLAND

MINOLTA

MITSUBISHI

Code

000 001 002 003 004 005 077 078 079

020

025

004 027 032

007 026

018

022

002 003 006 008 015 055

021 056

002 003 006 008 015 055

007

002 024

002 007 008 017 021 025 056 064 066

003 010 011 012 013 014 015 016

007 026

017

025

034

001 003 006 021 022 025 030 032 034 040

047 050 052 060 063 065 066 067 069 073

018 024 028 029 048 051 061

025

002 005 017 021 056

002

007

019 025 041 042 074

021

002 007 018 019 021 026 037 041 054 056

007 008 018 021 026 037

081 082 083

007 008 018 021 026 037

070

036

006 007 008 009 010

025

038

025

021 056 059

007 008 018 021 026 037 062

006

021

006 021 024 025

034

005

019 041 075

019 034 041 046

Brand

MONTGOMERY WARD

MTC

MULTITECH

NEC

OPTIMUS

ORION

PANASONIC

PENTAX

PENTEX RESEARCH+

PHILCO

PHILIPS

PIONEER

PORTLAND

PROSCAN

QUARTZ

QUASAR

RADIO SHACK/REALISTIC

RCA

SANSUI

SANYO

SCOTT

SEARS

SHARP

SHIMTOM

SIGNATURE

SONY

SYLVANIA

SYMPHONIC

TANDY

TASHIKA

TATUNG

TEAC

TECHNICS

TEKNIKA

TMK

TOSHIBA

TOTEVISION

UNITECH

VECTOR RESEARCH

VICTOR

VIDEO CONCEPTS

VIDEOSONIC

WARDS

YAMAHA

ZENITH

Code

020

002 025

002 005 025 038

007 008 018 026 037 062 064

020

073 074 075 076

021 056 071 072

019 041 075

008

021 056 059

021 080

019 026 039 053

015 049 055

017

018

021 056

006 018 020 021 024 025 029 034 048 056

002 017 019 021 035 041 043 057 068 076

026

018 024

003 047 052 067

006 018 019 024 028 029 041 048 051

020 034 045 015

027 033 038 058

025

027 033 044

021 025 056 059

025

018 025

006

037

025 037 068

021

006 021 025 031

066

003 019 029 051 052

002 006

002

007 026

026

007 026

002

002 003 006 019 020 021 024 025 034 038 041

007 008 018 026 037

023 027 033

English-19

CABLE

Brand

SAMSUNG

HAMLIN

HITACHI

JERROLD

MACOM

MAGNAVOX

OAK

PANASONIC

PHILIPS

PIONEER

RCA

REGAL

SAMSUNG DVD

Product

DVD

DVDR

BD Record

VCR COMBO

VCR Record

DHR COMBO

Code

000 001 002 003 004 005 006 007

041

003 024 031

025 030

038 039

025 030

019 023 028

026

003 022 027 037 044

019 021 023 028

004 018 020 044

014 022 040

003

Code

000 001 002

003 004

005 006

007 008 009 010 011

012

013

Brand

REGENCY

SCIENTIFIC ATLAN

SPRUCER

STARGATE 2000

SYLVANIA

TEXSCAN

TOCOM

UNIVERSAL

VIEWSTAR

WARNER AMEX

ZENITH

Product

Home Theater VCR COMBO

HDD Recorder COMBO

TWIN TRAY COMBO

STB DVD COMBO

DVD Receiver

AV Receiver

Code

015 023

042 043

022

036

016

032

033 034

019 021 023 028

046

017 029 035 037 045

Code

014 015 016

017

018

019

020

021

DVD

Brand

ANAM

AUDIOVOX

AUDIOLOGIC

ANABA

APEX DIGITAL

AIWA

BROKSONIC

BLAUPUNKT

B&K

CURTIS MATHES

CYBER HOME

CLARION

CIRRUS

CYBER HOME

CINEVISION

DAEWOO

DENON

FARENHEIT

FISHER

GPX

GO VIDEO

GREENHILL

HITACHI

HITEKER

HOYO

HARMAN / KARDON

IRT

Code

030

075

085

072

070 071 074 086 083 084 088 111 112

114

062

074

122 123

027

077 078 079 082

080 125

081

065

095

066

146

067 068

090

060

061 089 133 135

069 074

074

064 113

071

073

091 110

089

Brand

INTEGRA

JBL

JVC

JATON

KENWOOD

KISS

KONKA

KLH

LG(Goldstar)

LOEWE

LASONIC

MOBILE AUTHORITY

MEMOREX

MALATA

MAGNAVOX

MINTEK

MONYKA

NORCENT

NEXT BASE

NEC

NANTAUS

NESA

OPTOMEDIA ELECTRONICS

OPTIVIEW

ONKYO

PHILCO

PRINCETON

PROSCAN

English-20

Code

092

091

022 033 115 116

073

051 108 109

073

059 100 106 107

074 075

025 031

057

058

054

055

056

076 093

074 094

073

048 049 050

052

053

144

074

105

072

076 092 119

044 045

046 047

023

DVD

Brand

PANASONIC

PHILIPS

ROTEL

RIO

RCA

RAITE

ROWA

SAMPO

SONY

SHERWOOD

SVA

SYLVANIA

SHARP

SANSUI

SANYO

SHINSONIC

Code

024 034 124 134 136 137 138

036 076

117 118

120

023 035 074 075 131 132

073

038

104

026 029 126 127 128 129 130 141

039 041

042

043 093

140

062

062 090

094

SAMSUNG STB

Product

Ground wave STB

Satellite STB

CABLE STB

STB DVD COMBO

Satellite STB HDD COMBO Standard

Code

001 002

003

004

008

009

Brand

THOMSON

TOSHIBA

TECHNICS

TVIEW

TOKAI

TEAC

TECHWOOD

TREDEX

URBAN CONCEPTS

VENTURER

VOCOPRO

YAMAHA

YAMAKAWA

XWAVE

ZENITH

Product

Satellite STB HDD COMBO Premium

CABLE STB HDD COMBO Standard

CABLE STB HDD COMBO Premium

Ground wave STB HDD COMBO Standard

Ground wave STB HDD COMBO Premium

Code

145

028 062 076

139

072

073

096

097

098 099 101

076

075

102

032 063

040 073

103

076 121

Code

010

011

012

013

014

STB

Brand

ALPHASTAR

ANAM

CHANNEL MASTER

CROSSDIGITAL

CHAPARRAL

DIRECT TV

DAEWOO

DISH NETWORK SYSTEM

DISHPRO

DRAKE

DX ANTENNA

ECHOSTAR

EXPRESSVU

GOI

GENERAL INSTRUMENT

HTS

HOME CABLE

HITACHI

HUGHES NETWORK

IQ PRISM

JANEIL

JERROID

JVC

LG(Goldstar)

Code

023

043

018 034

019

035

015 016 017 019 022 045 060 061 062 065 066 067 068

074

069 070

069

018 024 032

027

025 069 070 071

069

065

046 047 048 063 064

069

056

022

015 017

020

059

063

069 070

044 073

English-21

Brand

MAGNAVOX

MEMOREX

MOTOROLA

MACOM

MITSUBISHI

NEXT LEVEL

PHILIPS

PRIMESTAR

PANASONIC

PAYSAT

PROSCAN

RCA

RADIOSHACK

REALISTIC

STAR TRAK

STS

SKY

SKY LIFE

SHACK

STAR CHOICE

SONY

TOSHIBA

ULTIMATE TV

UNIDEN

ZENITH

Code

016 021 036 038 039 040 041 042

016

064

018

015

047 048 064

015 016 017 021 033 036 038 039 040 041 042 067

046 049 050 063

058 059 061 062

016

065 066

051 052 053 065 066

064

057

026

020 027

031

005 006 007

064

054 060

015 017 028 029 030 072

060 066

016 021 037 055 056 057

024 031 068

To Select the Source

Use to select TV or other external input sources connected to the TV. Use to select the input source of your choice.

1. Press the MENU button to display the menu. Press the ENTER button to select “Input”.

2. Press the ENTER button to select “Source List”. Press the  or  buttons to select signal source, then press the ENTER button.

When you connect equipment to the LCD, you can choose between the following sets of jacks: TV, AV1, AV2, S-Video1, S-Video2, Component, PC, HDMI1, or HDMI2 on the TV’s rear panel. HDMI1 or HDMI2 input can only be selected when the external device is turned on and connected via HDMI. AV2/S-Video2 is placed on the side of the TV.

You can choose only those external devices that are connected to the TV.

Press the SOURCE button on the remote control to view an external signal source.

To Edit the Input Source Name

Name the device connected to the input jacks to make your input source selection easier.

1. Press the MENU button to display the menu. Press the ENTER button to select “Input”. Press the  or  buttons to select “Edit Name”, then press the ENTER button.

2. Press the  or  buttons to select “AV1”, “AV2”, “S-Video1”, “S-Video2”, “Component”, “PC”, “HDMI1” or “HDMI2” input jack, then press the ENTER button.

3. Press the  or  buttons to select “VCR”, “DVD”, “D-VHS”, “Cable STB”, “HD STB”, “Satellite STB”, “PVR STB”, “AV Receiver”, “DVD Receiver”, “Game”, “Camcorder”, “DVD Combo”, “PC”, “VOD STB”, or “TV” input source, then press the ENTER button.

Press the

EXIT button to exit.

English-22

Picture Control

Using Automatic Picture Settings

Your TV has four automatic picture settings (“Dynamic”, “Standard”, “Movie”, and “Custom”) that are preset at the factory. You can activate either Dynamic, Standard, Movie, or Custom by making a selection from the menu. Or, you can select “Custom” which automatically recalls your personalized picture settings.

1. Press the MENU button to display the menu. Press the  or  buttons to select “Picture”, then press the ENTER button.

2. Press the ENTER button to select “Mode”. Press the ENTER button again. Press the  or  buttons to select the “Dynamic”, “Standard”, “Movie”, or “Custom” picture setting. Press the ENTER button.

 Choose Dynamic to increase the clarity and sharpness of the picture.  Choose Standard for the standard factory settings.  Choose Movie when watching movies.  Choose Custom if you want to adjust the settings according to personal preference.

When in PC mode, Tint, Sharpness and Color are not available. Picture mode needs to be adjusted separately for each input.

3. Press the  or  buttons to select “Contrast”, “Brightness”, “Sharpness”, “Color”, or “Tint”, then press the ENTER button.

4. Press the  or  buttons to decrease or increase the value of a particular item. For example, if you select “Contrast”, pressing the  button increases it. Press the ENTER button.

Press the

• “Tint” doesn’t operate in HDMI, PC or any Component mode.

• The Tint cannot be adjusted while watching Digital TV.

• Each adjusted setting will be stored separately according to its input mode.

• When you make changes to Contrast, Brightness, Sharpness, Color, Tint , OSD color

EXIT button to exit.

will also be adjusted accordingly.

English-23

Adjusting the Color Tone

You can change the color of the entire screen according to your preference.

1. Press the MENU button to display the menu. Press the  or  buttons to select “Picture”, then press the ENTER button.

2. Press the ENTER button.

3. Press the  or  buttons to select “Color Tone”, then press the ENTER button.

4. Press the  or  buttons to select “Cool2”, “Cool1”, “Normal”, “Warm1”,

or “Warm2”. Press the ENTER button.

Choose from the following Color Tone settings: “Cool 2”, “Cool 1”, “Normal”, “Warm 1”, “Warm 2” according to personal preference.

Resetting the Picture Settings to the Factory Defaults

1. Press the  or  buttons to select “Reset”, then press the ENTER button. Press the

EXIT button to exit.

Each mode can be reset.

DNIe Demo(Digital Natural Image engine)

Samsung’s new technology brings you more detailed images with contrast, white enhancement and 3D noise reduction. You can see how DNIe improves the picture by setting DNIe demo mode to On.

1. Press the MENU button to display the menu. Press the  or  buttons to select “Picture”, then press the ENTER button.

2. Press the  or  buttons to select “DNIe Demo”, then press the ENTER button.

This function doesn’t work when the Input Source is PC.

3. Press the  or  buttons to select “On” or “Off”, then press the ENTER button. Press the

EXIT button to exit.

• DNIe Demo: Off

DNIe Demo mode is deactivated. DNIe Demo: On

• The right-hand side of the screen shows the improved DNIe image. The left-hand side of the screen shows the original image.

• The “DNIe Demo” is designed to show the difference between the regular and DNIe pictures.

• By default, the product displays the picture with DNIe applied.

English-24

Changing the Screen Size

Screen size selection depends on the type of video input.

1. Press the MENU button to display the menu.

2. Press the  or  buttons to select “Size”, then press the ENTER button.

Press the

 or  buttons to select “Picture”, then press the ENTER button.

3. Press the  or  buttons to select the screen format you want. Press the

Press the

ENTER button.

EXIT button to exit.

• 16:9 : Sets the picture to 16:9 wide mode.

• Zoom1 : Magnifies the size of the picture on the screen.

• Zoom2 : Expands the Zoom1 format picture.

• 4:3 : Sets the picture to 4:3 normal mode.

Alternately, you can press the P.SIZE button on the remote control repeatedly to change

the picture size.

•

If you watch a still image or the 4:3 mode for a long time (over 2 hours), an image may be burned onto the screen. View the TV in 16:9 mode as much as possible.

•

HD (High Definition)

16:9 - 1080i (1920x1080), 720P (1280x720)

16:9

Sets the picture to 16:9 wide mode.

Zoom1

The screen size when Wide screen is vertically enlarged.

Zoom2

The screen size when the Zoom1 screen is

4:3

Sets the picture to 4:3 normal mode.

vertically enlarged.

• In TV, VIDEO, S-VIDEO and all COMPONENT (480i, 480p) modes, all screen modes can be selected. (16:9 • Zoom1 • Zoom2 • 4:3).

• In TV(DTV), DVI, PC, HDMI, COMPONENT (720p, 1080i) modes, only 16:9 & 4:3 modes can be selected.

• You must select Zoom with P.Size button on the remote (not in the OSD menu) if you want to move the Zoom 1 or 2 picture up or down.

• You can not change the picture size when PIP is set to Double.

English-25

Freezing the Picture

1. Press the STILL button to freeze a moving picture.

Normal sound will still be heard. Press again to cancel.

Viewing Picture-in-Picture

This product has one built-in tuner, which does not allow PIP to function in the same mode. For example, you cannot watch one TV channel in the main screen, and a different one in the PIP screen. Please see ‘PIP Settings’below for details. You can use the PIP feature to simultaneously watch two video sources. (See page 31 to select the PIP picture sound.)

While V-Chip is in operation, the PIP function cannot be used.

Activating Picture-in-Picture

1. Press the MENU button to display the menu. Press the  or  buttons to select “Picture”, then press the ENTER button. Press the  or  buttons to select “PIP”, then press the ENTER button.

PIP Settings

Sub

Picture

Main Picture

TV analog

AV 1,2

S-Video 1, 2

TV digital HDMI 1, 2

Component

2. Press the ENTER button again. Press the  or  buttons to select “On”, then press the ENTER button.

If you turn the TV off while watching in PIP mode and turn it on again, the PIP window will disappear.

Alternately, you can press the PIP button on the remote control repeatedly to activate or deactivate the PIP.

O: PIP operates / X: PIP doesn’t operate

TV analog AV 1,2 S-Video 1, 2 TV digital HDMI 1, 2 Component PC

X X X X

X X

X O O

X O

X X X O O X X

X O O X X O X

O O O X X O X

X X X O O X X

X X X X X X X

English-26

continued...

Selecting a Signal Source (External A/V) for PIP.

3. Press the  or  buttons to select “Source”, then press the ENTER button.

Select the source of the sub picture (PIP) by pressing the  or  buttons and press the ENTER button.

MAIN: TV(Analog) / PIP: HDMI(1, 2) The sub picture can serve different source selections based on what the main picture is set to. In the PIP Source selection menu, ‘TV’ represents both analog and digital tuning.

Swapping the Contents of the PIP and Main image

4. Press the  or  buttons to select “Swap”, then press the ENTER button.

Changing the PIP Channel

5. Press the  or  buttons to select “Channel”, then press the ENTER button.

Press the  or  buttons to select the desired channel in the PIP window. Press the

• MAIN: AV(1, 2), S-Video(1, 2), Component / PIP: TV(Digital)

• MAIN: PC, HDMI(1,2) / PIP: TV(Analog)

• The channel can be active when the sub picture is set to TV.

ENTER buttons.

Changing the Position of the PIP Window

Changing the Size of the PIP Window

Press the PIP Channel buttons on the remote control.

6. Press the  or  buttons to select “Position”, then press the ENTER button.

Press the Press the

 or  buttons to select the desired PIP window position. ENTER buttons.

The Double ( ), Double Wide ( ) mode cannot be selected in Position mode.

7. Press the  or  buttons to select “Size”, then press the ENTER button.

Press the  or  buttons to select the desired size of the PIP window. Press the ENTER button.

Press the

EXIT button to exit.

If main picture is in PC mode, Size is not available.

• You cannot choose the PIP option.

• You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.

• You can adjust picture position only by using the size menu.

English-27

Sound Control

Customizing the Sound

The sound settings can be adjusted to suit your personal preference. (Alternatively, you can use one of the “automatic” settings.)

1. Press the MENU button to display the menu. Press the  or  buttons to select “Sound”, then press the ENTER button.

2. Press the  or  buttons to select “Equalizer”, then press the ENTER button.

3. Press the  or  buttons to select a particular frequency to adjust.

Press the Press the

Press the

Using Automatic Sound Settings

Your TV has automatic sound settings (“Standard”, “Music”, “Movie”, “Speech”, and “Custom”) that are preset at the factory. Or, you can select “Custom”, which automatically recalls your personalized sound settings.

1. Press the MENU button to display the menu. Press the  or  buttons to select “Sound”, then press the ENTER button.

2. Press the ENTER button to select “Mode”. Press the  or  buttons to select “Standard”, “Music”, “Movie”, “Speech”, or “Custom” sound setting, then press the ENTER button.

Press the

 or  buttons to increase or decrease the level of the particular frequency.

ENTER button. EXIT button to exit.

• L/R Sound Balance Adjustment: To adjust the sound balance of the L/R speakers. Bandwidth Adjustment (100Hz, 300Hz, 1KHz, 3KHz, 10KHz)

• : To adjust the level of different bandwidth frequencies.

EXIT button to exit.

• Choose Standard for the standard factory settings.

Music when watching music videos or concerts.

• Choose Movie when watching movies.

• Choose Speech when watching a show that is mostly dialog (i.e., news).

• Choose Custom to recall your personalized settings (see “Customizing the Sound”).

• Choose

Setting the TruSurround XT

TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

1. Press the MENU button to display the menu. Press the  or  buttons to select “Sound”, then press the ENTER button.

2. Press the  or  buttons to select “SRS TruSurround XT”, then press the ENTER button.

3. Press the  or  buttons to select “On” or “Off”, then press the ENTER button.

Press the

TRADEMARK & LABEL LICENSE NOTICE

EXIT button to exit.

TruSurround XT, SRS and Symbol are

trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.

English-28

+ 149 hidden pages