Samsung LN-P267W User Manual

English-1

YOUR NEW TV

Rear Panel Jacks

Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.

For more information on connecting equipment, see pages 7-14.

DVI-D INPUT

Connect to the digital video output jack on your
DVD/Set-top box.
(DVI-D terminal does not support PC.)

PC VIDEO (D-SUB) INPUT

Connect to the video output port on your PC.

PC AUDIO INPUT

Connect to the audio output jack on your PC.

DVI-D AUDIO INPUT

Connect to the audio output jack on your
DVD/Set-top box.

COMPONENT IN 1

Connect component video/audio from a
DVD/VCR/Set-top box.

COMPONENT IN 2

Connect component video/audio from a
DVD/VCR/Set-top box.

S-VIDEO

Connect an S-Video signal from
a camcorder or VCR

VIDEO/AUDIO INPUT

Connect a video signal from
a camcorder or VCR.

ANT IN

Connect to an antenna or to a cable TV
system.

SUBWOOFER OUTPUT

Connect to an active (powered)
subwoofer.

HEADPHONE JACK

Connect a set of external headphones
for private listening.

POWER INPUT

BN68-00751A-00ENG.qxd 7/30/04 8:22 AM Page 3

English-2

I NSTALLATION

3

Connect an S-video
cable between the
S-VIDEO OUT jack on
the VCR and the
S-VIDEO jack on
the TV.

An S-Video cable is usually included with an S-VHS VCR.
(If not, check your local electronics store.)

* Each external input source device has a different back panel configuration.

1

To begin, follow
steps 1–3 in the
previous section to
connect the antenna
or cable to your
VCR and your TV.

Connecting an S-VHS VCR

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR.
(This connection delivers a better picture as compared to a standard VHS VCR.)

2

Connect a set of audio
cables between the
AUDIO OUT jacks on
the VCR and the
L-AUDIO-R jacks on
the TV.

Connecting a DVD/Set-top box via DVI

* Each external input source device has a different back panel configuration.

1

Connect a DVI-D
cable between the
DVI-D connector
on the TV
and the DVI connector
on the DVD player/
Set-top box.

2

Connect a set of audio
cables between the
L-AUDIO-R jack on the
TV and the
AUDIO OUTPUT jacks
on the DVD player/
Set-top box.

BN68-00751A-00ENG.qxd 7/30/04 9:44 AM Page 12