SAMSUNG LN55C750 User Manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comuníquese con SAMSUNG WORLDWIDE

Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de atención al cliente de SAMSUNG.

LCD TV

user manual

Country Customer Care Center

CANADA 1-800-SAMSUNG(726-7864) www.samsung.com

U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com

Web Site Address

Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga, Ontario L5R 4B2 Canada

Samsung Electronique Canada Inc., Service à la Clientèle 55 Standish Court Mississauga, Ontario L5R 4B2 Canada

Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511

LCD TV

user manual

BN68-02584A-02

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model Serial No.

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and speciﬁcations may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

See the warranty card for more information on warranty terms.

✎

Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format fullmotion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to ﬁll the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LCD models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.

SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT• Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics

(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally speciﬁed, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product.

Excluded, but not limited to, are any originally speciﬁed provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

In the United States : 1-800-SAMSUNG (1-800-726-7864) – In Canada : 1-800-SAMSUNG –

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of LCD screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:

Avoid displaying the same TV channel for long periods.• Always try to display any image on full screen, use TV set picture format menu for best possible match.• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout •

process. Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.•

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation. Failing to do so may result in ﬁre or a problem with the product due to an increase in the internal temperature of the product.

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

✎

If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

The appearance may differ depending on the product.

✎

Installation with a stand. Installation with a wall-mount.

4inches

English

Contents

English

ENGLSH

POWER

F A V . CH

MEDIA.P

P . MODE

S.MODE

P . SIZE

MTS

INFO

SLEEP

TOOLS

CH LIST

Getting Started

List of Features y ......................................................... 4

Accessories y .............................................................. 4

Installing the LCD TV Stand y ...................................... 4

Viewing the Control Panel y ......................................... 5

Viewing the Remote Control y ...................................... 6

Connecting to an Antenna y ........................................7

Plug & Play (Initial Setup) y ........................................... 7

Connections

Connecting to an AV Device y ......................................8

Connecting to an Audio Device y ................................. 9

Connecting to a PC y ................................................10

Changing the Input source y ...................................... 11

How to Navigate Menus y .......................................... 12

Channel Menu y ........................................................ 12

Seeing Channels 12 Using Favorite Channels 13 Memorizing channels 13 Editing channels 13 Other Features 13

Picture Menu y .......................................................... 14

Changing the Preset Picture Mode 14 Adjusting picture settings 15 Economical Solutions 15 Setting up the TV with your PC 15 Changing the Picture Options 16 Viewing TV using the 3D function 18

Sound Menu y .......................................................... 20

Changing the Preset Sound Mode 20 Adjusting sound settings 20 Sound Settings 20

Setup Menu y ............................................................ 21

Setting the Time 21 Using the Sleep Timer 22 Setting the On/Off Timer 22 Locking Programs 22 Other Features 24 Picture In Picture (PIP) 25

Support Menu y ......................................................... 25

Advanced Features

Network Connection y ...............................................27

Connecting to a Wired Network 27 Connecting to a Wireless Network 29

Media Play y .............................................................. 34

Connecting a USB Device 34 Connecting to the PC through network 34 Screen Display 36 Playing Multiple Files 39 Media Play - Additional Functions 39

Anynet+ y ................................................................. 41

Setting Up Anynet+ 42 Switching between Anynet+ Devices 42 Recording 42 Listening through a Receiver 43 Troubleshooting for Anynet+ 43

Internet@TV y ............................................................ 44

Getting Started with Internet@TV 44 Setting up Internet@TV 45 Using the Internet@TV service 47 Troubleshooting for Internet@TV 50 Help Website 50

AllShare y ..................................................................51

About AllShare 51 Setting Up AllShare 51

Other Information

Assembling the Cables y ........................................... 53

Anti-theft Kensington Lock y ...................................... 53

Installing the Wall Mount y .........................................53

Securing the TV to the Wall y ..................................... 55

Troubleshooting y ...................................................... 56

Speciﬁcations y ......................................................... 59

License 59

Dimensions y ............................................................. 60

Index y ...................................................................... 61

Check the Symbol!

This function can be used by pressing the

TOOLS button on the remote control.

✎

Note :

Important information

Step by step guide :

Informs you how to access

the menu.

Getting Started

List of Features

Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed y without a cable box / STB (Set-Top-Box) satellite receiver.

Media Play y : Allows you to play music ﬁles, pictures, and movies saved on a USB or your PC. (P. 34) Internet@TV y : You can use various Internet services and view useful information and entertaining content. (p. 44) AllShare y : AllShare connects your TV and compatible Samsung mobile phones/devices through a network. (P. 51) Self Diagnosis y : You can check picture and sound operation. (P. 26)

Accessories

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

✎

The items' colors and shapes may vary depending on the models.

✎

Remote Control (BN59-01043A) & Batteries (AAA x 2) y Owner’s Instructions y Warranty Card / Safety Guide / Quick Setup Guide y

(M8 X 19: 46 ~ 55inch TVs)

Cleaning Cloth (BN63-01798B) y Power Cord y

Blanking Bracket y

(BN63-06339A)

TV-Holder & Screw y (M8: BN96-10788B)

Installing the LCD TV Stand

Components

When installing the stand, use the provided components and parts.

A B

1 EA 1 EA

Stand Guide Stand Screws

4EA

Top View

Cable Tie y

(BN61-05596A)

Bottom View

Holder-Ring (4ea) y

(BN61-04529A )

4EA (M4 X L12)

4EA (M4 X L8)

4EA

English

Rear

Front

Make sure to distinguish between the front and back of the Stand

✎

and Guide Stand when assembling them. Make sure that at least two persons lift and move the LCD TV.

✎

Stand the product up and fasten the screws. If you fasten the

✎

screws with the LCD TV placed down, it may lean to one side.

01 Getting Started

English

Viewing the Control Panel

The product color and shape may vary depending on the model.

✎

Speakers

Power IndicatorRemote control sensor

(Power)

Remote control sensor Aim the remote control towards this spot on the TV.

SOURCE

MENU Displays an on-screen menu, the OSD (on screen display), of your TV’s features.

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

Turns the TV on or off.

Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control.

Adjusts the volume. In the OSD, use the ◄ and ► buttons on the remote control.

Changes the channels. In the OSD, use the ▼ and ▲ buttons on the remote control.

buttons as you would use the

PRE-CH

VOL

MUTE

RETURN

CH LIST

EXIT

ABCD

CONTENTINTERNET

FA V. CH

MEDIA.P

Y A HOO!

P.SIZE

TOOLS

INFO

Getting Started

Viewing the Remote Control

This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel,

✎

Volume buttons.

Displays and selects the available video

Press to directly access channels.

Press to select additional channels (digital)

being broadcast by the same station. For

example, to select channel ‘54-3’, press

Displays the channel list on the screen.

Displays the Content View, which

includes Channel List, Internet@TV,

Media Play, AllShare and 3D.

Quickly select frequently used functions.

Returns to the previous menu.

Use these buttons in Media Play and

(: controls recording on Samsung

recorders with the Anynet+ feature)

Turns the TV on and off.

sources. (P. 11)

‘54’, then press ‘-’ and ‘3’.

Adjusts the volume.

(P. 12)

Anynet+ modes.

Turns the remote control light on and off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to off will reduce the battery usage time.)

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Displays the main on-screen menu.

Link to various Internet services. (P. 44)

Press to display information on the TV screen. (P. 21)

Selects the on-screen menu items and changes the values seen on the menu.

Exits the menu.

Buttons used in the Channel list,

Internet@TV, Media Play menu, etc.

MEDIA.P: Views Media Play. (P. 34) YAHOO!: Runs Yahoo widget! (P. 48) 3D: Sets the 3D mode. (P. 18) FAV.CH: Displays Favorite Channel Lists on the

screen (P. 13)

P.SIZE: Choose the picture size. (P. 17) CC: Controls the caption decoder. (P. 24)

Installing batteries (Battery size: AAA)

English

NOTE

✎

Use the remote control within 23 feet from the TV.

Bright light may affect the performance of the remote

control. Avoid use when nearby fluorescent lights or neon signs.

The color and shape may vary depending on the model.

01 Getting Started

English

Connecting to an Antenna

POWER

INFO

CH LIST

When the TV is initially powered on, basic settings proceed automatically.

Connecting the mains and antenna.

✎

VHF/UHF Antenna

Power Input

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in conﬁguring basic settings. Press the

POWERP button. Plug & Play is available only when the Input source is set to TV.

To return to the previous step, press the red button.

✎

Selecting a language

Selecting Store Demo

or Home Use

Selecting an antenna

Selecting a channel The channel search will start automatically.

Setting the Clock

Mode

Viewing the HD

Connection Guide Enjoy your TV.

Press the ▲ or ▼ button, then press the ENTERE button. Select the desired OSD (On Screen Display) language.

Press the ◄ or ► button, then press the ENTERE button.

Select the y Home Use mode. Store Demo Mode is for retail environments.

To return the unit’s settings from y Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume in the OSD, press and hold MENU for 5 sec.

Press the ▲ or ▼ button, then press the ENTERE button. Select Air, Cable or Auto.

In ✎Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲, ▼, ◄ or ► button, then press the ENTERE button.

For more information, refer to Channel → Auto Program. (P. 13)

Press the ✎ENTERE button at any time to interrupt the memorization process.

Set the Clock Mode automatically or manually.

If you select the ✎Auto, set the daylight saving time. Select the time zone which you live.

The connection method for the best HD screen quality is displayed.

Press the ENTERE button.

Cable

ANT OUT

If You Want to Reset This Feature...

O m

→ Setup → Plug & Play → ENTER

Setup

Plug & Play

Time Menu Language : English Caption : Off Security Network General

PIP : Off

R-AUDIO-L

R PB Y

W W

BGRR

ConnectionsConnections

Connecting to an AV Device

Using an HDMI / DVI Cable: HD connection (up to 1080p)

We recommend using the HDMI connection for the best quality HD picture. Available devices: DVD, Blu-ray player, HD cable box, HD satellite receiver (STB).

Red White

BD/DVD player/

HD cable/Sat. box

HDMI OUT

Device

DVI OUT

AUDIO OUT

HDMI IN 1(DVI) ✎, 2(ARC), 3, 4 / PC/DVI AUDIO IN

When using an HDMI/DVI cable connection, you must use the xHDMI IN 1(DVI) jack for video. A DVD, Blu-ray player, HD cable box, HD STB satellite receiver, cable box, or STB satellite receiver may require a DVI-HDMI (DVI to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.

If an external device such as a DVD / Blu-ray player / cable box / satellite receiver (Set-Top Box) supporting an

HDMI versions older than 1.4 is connected, the TV may operate abnormally (e.g. no screen display / no sound / annoying ﬂicker / abnormal color).

If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you

suspect the version is older than 1.4, contact the provider of the device to conﬁrm the HDMI version and request an upgrade.

Samsung TVs support HDMI 1.4 (with 3D and Audio Return Channel). However, the ARC(Audio Return

Channel) function is only supported on HDMI IN 2(ARC).

If – 3D Auto View is On, some functions, such as Yahoo or Internet@TV, are disabled. To use these functions, set 3D Auto View or 3D Mode to Off.

The ARC function enables digital output of sound using the TV's xHDMI IN 2(ARC) port and can only be operated when the TV is connected to an audio receiver that supports the ARC.

The ARC mode is only enabled when the TV is connected to a device with an HDMI Standard cable, HDMI – High Speed cable, Hdmi Standard with Ethernet cable or HDMI High Speed with Ethernet cable.

When the Input Source is the TV, the ARC function allows audio to be heard from a receiver. The audio is sent – to a receiver from the TV via an HDMI cable without the need for a separate optical cable.

It is recommended you purchase an HDMI-certiﬁed cable. Otherwise, the screen may appear blank or a

connection error may occur.

English

Using a Component Cable: (up to 1080p), Using an Audio/Video Cable: (480i only)

R PB Y

R-AUDIO-L

R PB Y

W Y

BGR

R-AUDIO-L

R PB Y

W W

BGRRWY

English

02 Connections

R-AUDIO-L

R PB Y

W W

BGRR

Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR

✎

When connecting to ✎AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).

For better picture quality, the Component connection is recommended over the A/V connection.

VCR

VIDEO OUT

AUDIO OUT

COMPONENT OUT

Connecting to an Audio Device

Using an Optical (Digital) or Audio (Analog) Cable Connection

Available devices: Digital Audio System, Ampliﬁer, Home Theater

Red White

DIGITAL AUDIO OUT (OPTICAL)

✎

When a Digital Audio System is connected to the xDIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system.

5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the

TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theater.

AUDIO OUT ✎: Connects to the audio input jacks on your amplifier/home theater.

When connecting, use the appropriate connector (sold separately).

When an audio amplifier is connected to the xAUDIO OUT jacks: Decrease the volume of the TV and adjust the volume level with the amplifier’s volume control.

Blu-ray player

Yellow Red White Red Blue Green

AUDIO IN

DVD

Home Theater

Digital audio system

OPTICAL

Connections

Using an HDMI/DVI Cable / a D-sub Cable

Connecting to a PC

AUDIO OUT

DVI OUT

PC OUT

AUDIO OUT

Display Modes (D-Sub and HDMI/DVI Input)

Optimal resolution is 1920X1080@60Hz.

Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V)

IBM

MAC

VESA CVT

VESA DMT

VESA GTF

VESA DMT / DTV CEA 1920 x 1080p 67.500 60.000 148.500 +/+

NOTE

✎✎

640 x 350 31.469 70.086 25.175 +/720 x 400 31.469 70.087 28.322 -/+ 640 x 480 35.000 66.667 30.240 -/832 x 624 49.726 74.551 57.284 -/-

1152 x 870 68.681 75.062 100.000 -/-

720 x 576 35.910 59.950 32.750 -/+ 1152 x 864 53.783 59.959 81.750 -/+ 1280 x 720 56.456 74.777 95.750 -/+ 1280 x 960 75.231 74.857 130.000 -/+

640 x 480 31.469 59.940 25.175 -/-

640 x 480 37.861 72.809 31.500 -/-

640 x 480 37.500 75.000 31.500 -/-

800 x 600 37.879 60.317 40.000 +/+

800 x 600 48.077 72.188 50.000 +/+

800 x 600 46.875 75.000 49.500 +/+ 1024 x 768 48.363 60.004 65.000 -/1024 x 768 56.476 70.069 75.000 -/1024 x 768 60.023 75.029 78.750 +/+ 1152 x 864 67.500 75.000 108.000 +/+

1280 x 1024 63.981 60.020 108.000 +/+ 1280 x 1024 79.976 75.025 135.000 +/+

1280 x 800 49.702 59.810 83.500 -/+ 1280 x 800 62.795 74.934 106.500 -/+ 1280 x 960 60.000 60.000 108.000 +/+ 1280 x 720 45.000 60.000 74.250 +/+ 1360 x 768 47.712 60.015 85.500 +/+ 1440 x 900 55.935 59.887 106.500 -/+ 1440 x 900 70.635 74.984 136.750 -/+

1680 x 1050 65.290 59.954 146.250 -/+

1280 x 720 52.500 70.000 89.040 -/+

1280 x 1024 74.620 70.000 128.943 -/-

For HDMI/DVI cable connection, you must use the xHDMI IN 1(DVI) jack. The interlace mode is not supported.

The set might operate abnormally if a non-standard video format is selected.

Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

English

02 Connections

EX-LINK

P . SIZE

CH LIST

Connector for service only.

Input Cables (Sold Separately)

HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA

Changing the Input source

Source List

O m

Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite receiver.

TV / PC / AV1 / AV2 / Component1 / ■ Component2 / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB

→ Input → Source List → ENTER

You can only choose external

✎

devices that are connected to the TV. In the

Source List, connected inputs will be highlighted. PC ✎ always stay activated.

Edit Name

O m

VCR / DVD / Cable STB / Satellite STB / PVR STB / ■ AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:

Name the device connected to the input jacks to make your input source selection easier.

→ Input → Edit Name → ENTER

When a PC with a resolution of 1920 x 1080 @

✎

60Hz is connected to the HDMI IN 1(DVI) port, you should set to DVI PC mode under Edit Name.

When connecting an HDMI/DVI cable to the ✎HDMI

IN 1(DVI) port, you should set to DVI PC or DVI

Devices mode under Edit Name.

Basic Features

PRE-

MUT

H LI

CONTEN

INTERNET

TOOL

INFO

RETURN

EXIT

ABCD

CH LIST

How to Navigate Menus

Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.

1 MENU button: Displays the main on-screen menu. 2 ENTERE / Direction button: Move the cursor and

select an item. Conﬁrm the setting.

3 RETURN button: Returns to the previous menu. 4 EXIT button: Exits the on-screen menu.

How to Operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

▲ / ▼ Select an icon with the ▲ or ▼

ENTER

▲ / ▼

◄ / ►

ENTER

EXIT

The main menu options appear on the screen:

Picture, Sound, Channel, Setup, Input, Application, Support.

button.

Press ENTERE to access the sub-menu.

Select the desired submenu with the ▲ or ▼ button.

Adjust the value of an item with the ◄ or ► button. The adjustment in the OSD may differ depending on the selected menu.

Press ENTERE to conﬁrm the selection.

Press EXIT.

Channel Menu

Seeing Channels ¦

Channel List

O m

Add, delete or set Favorite channels and use the program guide for digital broadcasts.

Select a channel in the All Channels, Added Channels, Favorite or Programmed screen by pressing the ▲ / ▼ buttons, and pressing the ENTERE button. Then you can watch the selected channel.

Added Channels

Air A Antenna B Zoom C Select Page T Tools

■ All Channels: Shows all currently available

■ Added Channels: Shows all added channels.

■ Favorite: Shows all favorite channels.

■ Programmed: Shows all currently reserved

Using the color buttons with the ✎Channel List

x x

number.

Select desired channels and press the Yellow button to set all the selected channels at the same time. The

T x (Tools): Displays the Channel List option menu.

(The Options menus may differ depending on the situation.)

Channel Status Display Icons

Icons Operations

* ) (

→ Channel → Channel List → ENTER

6 Air

6-1 ♥ TV #6

7 Air

8 Air 9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10 11-1 ♥ TV #11

channels.

programs.

Red (Antenna): Switches to Air or Cable. Green (Zoom): Enlarges or shrinks a channel

Yellow (Select): Selects multiple channel lists.

mark appears to the left of the selected channels.

(Page): Move to next or previous page.

A channel selected. A channel set as a Favorite. A reserved Program. A program currently being broadcast.

English

03 Basic Features

POWER

FAV . CH

P . MODE

P . SIZE

MTS

INFO

SLEEP

CH LIST

Using Favorite Channels ¦

O m

Add to Favorite / Delete from Favorite

Set channels you watch frequently as Favorites.

1. Select a channel and press the TOOLS

button.

2. Add or delete a channel using the Add to Favorite or Delete from Favorite menu

respectively.

Added Channels

Air A Antenna B Zoom C Select Page T Tools

→ Channel → Channel List → ENTER

6 Air

6-1 ♥ TV #6

7 Air

8 Air 9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10 11-1 ♥ TV #11

Delete Add to Favorite Timer Viewing Channel Name Edit Select All

Memorizing channels ¦

O m

Antenna (Air / Cable)

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).

Auto Program

Air ■ : Air antenna signal. Cable ■ : Cable antenna signal. Auto ■ : Air and Cable antenna.

NOTE ✎

When selecting the Cable TV system: Selects the

cable system. STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point, the signal source has been selected.

After all the available channels are stored, it starts

to remove scrambled channels. The Auto program menu then reappears.

→ Channel → ENTER

How to Stop Auto Programming

1. Press the ENTERE button.

2. A message will ask Stop Auto Program? Select Yes by

pressing the ◄ or ► button.

3. Press the ENTERE button.

Editing channels ¦

O m

Channel Name Edit

1. Select a channel and press the TOOLS button.

2. Edit the channel name using the Channel Name Edit

menu. Channel Name Edit ■ (analog channels only): Assign your

own channel name.

→ Channel → Channel List → ENTER

Other Features ¦

O m

→ Channel → ENTER

Clear Scrambled Channel

This function is used to ﬁlter out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes.

How to Stop Searching Scrambled Channels

1. Press the ENTERE button to select Stop.

2. Press the ◄ button to select Yes .

3. Press the ENTERE button.

This function is only available in ✎Cable mode.

Basic Features

Channel List

O m

Channel List Option Menu

Set each channel using the Channel List menu options (Add/ Delete, Add to Favorite/Delete from Favorite, Timer Viewing, Select All/ Deselect All). Option menu items may

differ depending on the channel status.

1. Select a channel and press the TOOLS button.

2. Select a function and change its settings. Add / Delete ■ : Delete or add a channel to display the

channels you want.

Timer Viewing ■ : You can set a desired channel to be displayed automatically at the intended time. Set the current time ﬁrst to use this function. (P. 21)

1. Press the ◄ / ► /▲ / ▼ buttons to select the

2. Press the TOOLS button, then select Timer Viewing.

3. Scroll up or down to adjust the settings in the box,

Select All ■ : Select all the channels in the channel list. Deselect All ■ : Deselect all the selected channels.

→ Channel → Channel List → ENTER

NOTE

✎

All deleted channels will be shown on the xAll Channels menu.

A gray-colored channel indicates the channel

has been deleted. The xAdd menu only appears for deleted

channels. Delete a channel from the xAdded Channels or

Favorite menu in the same manner.

desired channel in Channel List.

or use the numeric buttons on your remote for entering the date and time.

If you selected ✎Once, Every Week or Every Day in Repeat, you can enter the date you want.

Select OK, then press the ENTERE button when done.

NOTE

✎

Only memorized channels can be reserved.

Reserved programs will be displayed in the

Programmed menu. When a digital channel is selected, press the x►

button to view the digital program.

You can only select ✎Deselect All when one or more channels are selected.

Programmed

(in Channel List) You can view, modify or delete a show you have reserved to

watch.

1. Press the

2. Press the ◄ and ▼ button move to the Programmed

menu. Change Info ■ : Change a show you have reserved to

watch. Cancel Schedules ■ : Cancel a show you have reserved

to watch. Information ■ : Display a show you have reserved

to watch. (You can also change the reservation Information.)

Select All / Deselect All: ■ You can select or deselect all channels in the channel list.

ENTERE

button to select Channel List.

Fine Tune

(analog channels only) If the reception is clear, you do not have to ﬁne tune the

channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, ﬁne tune the channel manually.

Select y Fine Tune in the Channel menu. Fine tuned channels that have been saved are marked

✎

with an asterisk “*” on the right-hand side of the channel number in the channel banner.

To reset the fine-tuning, select ✎Reset.

Picture Menu

Changing the Preset Picture Mode ¦

O m

Mode

Select your preferred picture type.

Dynamic ■ : Suitable for a bright room. Standard ■ : Suitable for a normal environment. Natural ■ : Suitable for an eye comfortable display.

Movie ■ : Suitable for watching movies in a dark room.

→ Picture → Mode → ENTER

Natural ✎ is not available in PC mode.

English

03 Basic Features

Adjusting picture settings ¦

Setting up the TV with your PC ¦

O m

→ Picture → Backlight → ENTER

Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)

Your television has several setting options for picture quality control.

NOTE

✎

When you make changes to xBacklight, Contrast, Brightness, Sharpness, Color or Tint (G/R) the OSD will be adjusted accordingly.

In PC mode, you can only make changes to

Backlight, Contrast and Brightness. Settings can be adjusted and stored for each

external device connected to the TV. Lowering picture brightness reduces power

consumption.

Economical Solutions ¦

ECO Solution

O m

Energy Saving (Off / Low / Medium / High / Picture ■ Off / Auto): This adjust the brightness of the TV in order

to reduce power consumption. If you select Picture Off, the screen is turned off , but the sound remains on.

Press any button to turn on the screen again.

Eco Sensor (Off / On) ■ : To enhance your power savings; the picture settings will automatically adapt to the light in the room.

Min Backlight: When ECO sensor is On, the minimum screen brightness can be adjusted manually.

No Signal Power Off (Off / 15 min. / 30 min. / 60 min.) ■ Sets how quickly the TV switches to standby mode, if no picture is being received.

→ Picture → ECO Solution → ENTER

If you adjust the ✎Backlight, the Eco Sensor will be set to Off.

If ✎Eco Sensor is On, the display brightness may change (become slightly darker in most cases) depending on the surrounding light intensity.

Disabled when the PC is in power saving mode.

✎

Set the input source to PC.

Auto Adjustment

O m

ENTER

Adjust frequency values/positions and ﬁne tune the settings automatically.

Not available when connecting through HDMI/DVI

✎

cable.

→ Picture → Auto Adjustment →

Screen

Coarse / Fine ■ : Removes or reduces picture noise. If the

noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Finetune again. After the noise has been reduced, readjust the picture so that it is aligned to the center of screen.

Position ■ : Adjust the PC’s screen positioning if it does not ﬁt the TV screen. Press the ▲ or ▼ button to adjust the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.

Image Reset ■ : Resets the image to default settings.

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP) Depending on the version of Windows and the video card,

the actual screens on your PC will probably look different, but the same basic set-up information will apply in most cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1. Click on “Control Panel” on the Windows start menu.

2. Click on “Appearance and Themes” in the “Control

Panel” window and a display dialog-box will appear.

3. Click on “Display” and a display dialog box will appear.

4. Navigate to the “Settings” tab on the display dialog-box.

The correct size setting (resolution) [Optimum: 1920 X y 1080 pixels]

If a vertical-frequency option exists on your display y settings dialog box, the correct value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.

Basic Features

Changing the Picture Options ¦

Advanced Settings

O m

ENTER

(available in Standard / Movie mode) Compared to previous models, new Samsung TVs have

more precise pictures.

In PC mode, you can only make changes to ✎Dynamic Contrast, Gamma and White Balance.

Black Tone : Off ►

Dynamic Contrast : Medium Shadow Detail : 0 Gamma : 0 Expert Pattern : Off RGB Only Mode : Off Color Space : Native

Black Tone (Off / Dark / Darker / Darkest) ■ : Select the black level to adjust the screen depth.

Dynamic Contrast (Off / Low / Medium / High) ■ : Adjust the screen contrast.

Shadow Detail ■ : Increase the brightness of dark images.

Gamma ■ : Adjust the primary color intensity. Expert Pattern ■ (Off / Pattern 1 / Pattern 2): By

running the Expert Pattern function, the picture can be calibrated without a generator or ﬁlter. If the OSD menu disappears or a menu other than the Picture menu is opened, the calibration is saved and the Expert Pattern window disappears.

RGB Only Mode (Off / Red / Green / Blue) ■ : Displays the Red, Green and Blue color for making ﬁne adjustments to the hue and saturation.

Color Space (Auto / Native / Custom) ■ : Adjust the range of colors available to create the image. To adjust Color, Red, Green, Blue and Reset, set Color Space to Custom.

→ Picture → Advanced Settings →

Advanced Settings

▼

U Move E Enter R Return

Disabled under PC mode.

✎

While the ✎Expert Pattern is running, sound is not output.

Only enabled on DTV / Component / HDMI.

✎

White Balance ■ : Adjust the color temperature for a more natural picture.

R-Offset / G-Offset / B-Offset: Adjust each color's (red, green, blue) darkness.

R-Gain / G-Gain / B-Gain: Adjust each color's (red, green, blue) brightness.

Reset: Resets the White Balance to it's default settings.

10p White Balance (Off / On) ■ : Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.

Available when the picture mode is set to Movie

✎

and when the external input is set to HDMI or Component.

Some external devices may not support this

✎

function.

Interval: Select interval to adjust. Red: Adjust the red level. Green: Adjust the green level. Blue: Adjust the blue level. Reset: Resets the 10p White Balance to its default

settings.

Flesh Tone ■ : Emphasize pink “Flesh Tone.” Edge Enhancement (Off / On) ■ : Emphasize object

boundaries. xvYCC (Off / On) ■ : Setting the xvYCC mode on

increases detail and color space when watching movies from an external device (e.g. DVD player) connected to the HDMI or Component IN jacks.

Available when the picture mode is set to ✎Movie and when the external input is set to HDMI or Component.

Some external devices may not support this

✎

function.

English

03 Basic Features

P . SIZE

CH LIST

Picture Options

O m

ENTER

In PC mode, you can only make changes to the ✎Color

Ton e, Size and Auto Protection Time.

Color Tone (Cool / Normal / Warm1 / Warm2) ■

Size ■ : Your cable box/satellite receiver

may have its own set of screen sizes as well. However, we highly recommend you use 16:9 mode most of the time.

16:9: Sets the picture to 16:9 wide mode.

Zoom1: Use for moderate magniﬁcation. Zoom2: Use for a stronger magniﬁcation. Wide Fit: Enlarges the aspect ratio of the picture to ﬁt

the entire screen.

4:3: Sets the picture to basic (4:3) mode.

Screen Fit: Displays the full image without any cut-off

when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are input.

NOTE

✎

When Double ( xÀ, Œ) mode has been set in PIP (Picture-in-Picture), the Picture Size cannot be set.

After selecting xZoom1, Zoom2 or Wide Fit:

1. Press the ► button to select Position.

2. Press the ENTERE button.

3. Press the ▲ or ▼ button to move the picture up

4. Press the ENTERE button.

5. Press the ► button to select Reset.

6. Press the ENTERE button to reset the picture

→ Picture → Picture Options →

Picture Options

Color Tone : Normal ►

Size : 16:9 Digital Noise Filter : Auto MPEG Noise Filter : Auto

HDMI Black Level : Normal

Film Mode : Off Auto Motion Plus : Standard

Warm1 ✎ or Warm2 will be deactivated when the

picture mode is Dynamic. Settings can be adjusted and stored for each

✎

external device connected to an input on the TV.

Do not watch in 4:3 format for a long time. Traces

✎

of borders displayed on the left, right and center of the screen may cause image retention (screen burn) which are not covered by the warranty.

or down.

to its default position.

▼

U Move E Enter R Return

After selecting xScreen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode, you may need to center the picture:

1. Press the ◄ or ► button to select Position.

2. Press the ENTERE button.

3. Press the ▲, ▼, ◄ or ► button to move the

picture.

4. Press the ENTERE button.

5. Press the ◄ or ► button to select Reset.

6. Press the ENTERE button.

HD (High Definition): 16:9 - 1080i/1080p (1920x1080),

720p (1280x720) Settings can be adjusted and stored for each

external device you have connected to an input on the TV.

Input Source Picture Size

ATV, AV, Component (480i, 480p) DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p) PC 16:9, 4:3

Digital Noise Filter (Off / Low / Medium / High / Auto ■ / Auto Visualization): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may

appear on the screen.

When the signal is weak, try other options until the

✎

best picture is displayed.

Auto Visualization: When changing analog channels, displays signal strength.

Only available for analog channels.

✎

When bar is green, you are receiving the best

✎

possible signal.

MPEG Noise Filter (Off / Low / Medium / High / ■ Auto): Reduces MPEG noise to provide an improved

picture quality.

Disabled under PC mode.

✎

HDMI Black Level (Normal / Low) ■ : Selects the black level on the screen to adjust the screen depth.

Available only in HDMI mode.

✎

Film Mode (Off / Auto1 / Auto2) ■ : Sets the TV to automatically sense and process ﬁlm signals from all sources and adjusts the picture for optimum quality.

Available in TV, AV, COMPONENT (480i / 1080i)

✎

and HDMI (480i / 1080i).

16:9, Zoom1, Zoom2, 4:3

16:9, 4:3, Wide Fit, Screen Fit

Basic Features

MEDIA.P

P . MODE

P . SIZE

MTS

INFO

MEDIA.P

CH LIST

IMPORTANT SAFETY INFORMATION. READ THE FOLLOWING WARNINGS BEFORE YOU OR YOUR CHILD USE THE 3D FUNCTION

Auto Motion ■ Plus (Off / Clear / Standard / Smooth / Custom / Demo): Enhances motion in fast moving

scenes.

Auto Protection Time (2 hours / 4 hours / 8 hours ■ / 10 hours / Off): If the screen remains idle with a still

image for a certain period of time deﬁned by the user, the screen saver is activated to prevent the formation of ghost images on the screen.

Viewing TV using the 3D function ¦

O m

WARNING

[

As the TV xturns on, the left and right sides of 3D pictures may overlap more than usual. It may take time until the picture quality is optimized.

The 3D effect may be experienced differently

depending on the viewer. You may not notice the 3D effect at all if you have a prescription for one eye that is very different from the other eye.

Parents’ careful supervision is required particularly

when children or teenagers view 3D images. Photosensitive Seizure Warning and Other Health

Risks

Note that watching TV while sitting too close to the

screen for an extended period of time may weaken your eyesight.

Note that watching TV while wearing 3D Active

Glasses for an extended period of time may cause a headache or fatigue. If you feel headache, fatigue or dizziness, stop watching TV and rest.

→ Picture → 3D → ENTER

Some viewers may experience an epileptic seizure – or stroke when exposed to certain ﬂashing images or lights contained in certain television pictures or video games. If you or any of your relatives has a history of epilepsy or strokes, please consult with a medical specialist before using the 3D function.

Do not watch 3D pictures when you feel – incoherent, sleepy, tired or sick. Avoid watching 3D pictures for long hours.

Even those without a personal or family history – of epilepsy or stroke may have an undiagnosed condition that can cause “photosensitive epileptic seizures.”

If you experience any of the following symptoms – immediately stop watching 3D pictures and consult a medical specialist: (1) altered vision; (2)

lightheadedness; (3) dizziness; (4) involuntary movements such as eye or muscle twitching; (5) confusion; (6) nausea; (7) loss of awareness; (8) convulsions; (9) cramps; and/ or (10) disorientation. Parents should monitor and ask

their children about the above symptoms-children and teenagers may be more likely than adults to experience these symptoms.

Some 3D pictures may startle viewers. The pregnant,

elderly, epileptic and those suffering from serious physical conditions are advised to avoid utilizing the unit’s 3D functionality.

We do not recommend watching 3D if you are in bad

physical condition, need sleep or have been drinking liquor.

Please take care to be aware of the world around

you. This product is designed to be immersive. DO NOT use this product near open stairwells, cables, balconies, or other objects that can be tripped over, run into, knocked down, broken or fallen over. Being startled or deluding yourself into thinking that the 3D images are real may cause you to crush a nearby object or get injured trying to move your body.

Do not use the 3D Active Glasses for any other

purpose than for which it was designed. Wearing the 3D Active Glasses for any other purpose (as general spectacles, sunglasses, protective goggles, etc.) may physically harm you or weaken your eyesight.

When watching 3D images, turn on 3D Active

Glasses. Turn off 3D Active Glasses while not using. If you leave

3D Active Glasses on, battery lifespan is shortened. Be careful that children do not place the batteries

intheir mouths when removed from the 3D Active Glasses. Place the battery in a location that children or infants cannot reach.

Immersive video can potentially have adverse effects

on the user including motion sickness, perceptual after effects, disorientation, eye strain, and decreased postural stability. Take frequent breaks to lessen the potential of these effects, as is commonly suggested for other items, such as keyboards and computer monitors, that you may tend to fixate or concentrate on. If your eyes show signs of fatigue or dryness or if you have any of the above symptoms, immediately discontinue use of this device and do not resume using it for at least thirty minutes after the symptoms have subsided.

The ideal viewing distance should be three times

or more the height of the screen. We recommend sitting with viewer’s eyes on a level with the screen.

This exciting new feature enables you to view 3D content. In order to fully enjoy this feature, you must purchase a pair of Samsung 3D Active Glasses (SSG-2100AB, SSG-2200AR, SSG-2200KR) to view 3D video.

Samsung 3D Active Glasses are sold separately. For more detailed purchasing information, contact the retailer where you purchased this TV.

English

03 Basic Features

3D emitter

If there is any obstacle between the emitter and 3D

✎

Active Glasses, the proper 3D effect may not be obtained.

3D Mode

■ : Select the 3D input format. If you want to feel the 3D effect fully, please wear

✎

the 3D Active Glasses first, and then select 3D Mode from the list below that provides the best 3d viewing experience.

3D Mode Operation Off Turns the 3D function off.

2D → 3D Side by Side Displays two images next to

Top & Bottom Displays one image above

Line by Line Displays the images for the

Vertical Stripe Displays the images for the

Checker Board Displays the images for the

Frequency Displays the images for the

“Side by Side” and “Top & Bottom” are available

✎

when the resolution is 720p, 1080i and 1080p in DTV, HDMI and USB mode or when set to PC and the PC is connected through an HDMI/DVI cable.

“Vertical Strip”, “Line by Line” and “Checker

✎

Board” are available when the resolution is set to PC and the PC is connected through an HDMI/ DVI cable.

“Frequency” displays the frequency (60Hz only)

✎

when the resolution is set to PC.

■ → 2D (Off / On): Displays the image for the left eye

only.

This function is deactivated when

✎

to “2D → 3D” or Off.

■ : The overall adjustment of 3D

3D View point

perspective.

This function is deactivated when

✎

to “2D → 3D” or Off.

Changes a 2D image to 3D.

each other.

another.

left and right eye alternately in rows.

left and right eye alternately in columns.

left and right eye alternately in pixels.

left and right eye alternately in frames.

3D Mode is set

Depth ■ : Adjusts focus / depth in “2D → 3D” mode.

This function is only activated when the

✎

is “2D → 3D”.

Picture Correction

■ : Adjusts the images for the left and right eye.

■ : If 3D Auto View is set to On,

3D Auto View (Off / On)

a “Side-By-Side” format HDMI signal with one of the resolutions below is automatically switched to 3D. Here, correct 3D information must be sent from the HDMI 1.3 transmitter.

If a 3D failure occurs due to a 3D information error,

✎

set 3D Auto View to Off and manually select a 3D Mode using the 3D button or corresponding menu.

Support resolution (16:9 only)

✎

Resolution Frequency (Hz)

1280 x 720p 60 Hz 1920 x 1080i 60 Hz 1920 x 1080p 24 / 30 / 60 Hz

Resolution supported for HDMI PC mode

The resolution for HDMI PC mode is optimized to 1920 x 1080 input.

An input resolution other than 1920 x 1080 may not be displayed properly in 3D display or full screen mode.

How to watch the 3D image

3D Mode

To watch in 3D, wear 3D glasses and press the power button on the glasses. Watching 3D picture for a long time may cause eye fatigue and/or dizziness.

Cancel

Move E Enter e Exit

3D3D

Using the LEFT / RIGHT keys on the remote control,

select the icon suitable for the picture on screen.

Move E Enter e Exit

1. Press the CONTENT button, then the Content View

menu will appear.

2. Press the ◄ or ► button, then select 3D. To watch in 3D, wear 3D Active Glasses and press the power button on the glasses. Watching 3D picture for a long time may cause eye fatigue and/or dizziness.

3. Select OK, then press the ENTERE button.

4. Using the ◄ or ► buttons on your remote control,

selects the 3D Mode of the image you want to view.

Some 3D modes may not be available depending

✎

on the format of the image source.

Basic Features

Supported formats and operating speciﬁcations for HDMI 1.4

Source signal format Standard HDMI 1.4 3D

1920x1080p@24Hz x 2 1920x2205p@24Hz 1280x720p@60Hz x 2 1280x1470p@60Hz

The mode is automatically switched to 3D mode for the 3D video input in one of the formats above.

For the HDMI 1.4@24Hz format, the TV is optimized as follows:

Resolution First Display Mode – : If Auto Motion Plus is set to Off, Clear or Standard, you can

watch the video at a high resolution optimized to the resolution of the source video.

Judder Reduction Display Mode – : When Auto Motion Plus is set to Smooth or Custom, you can

watch a smooth picture without judder.

Before using 3D function...

NOTE

✎

You may notice a small amount of screen flickering

when watching 3D images in poor light conditions (from a strobe light, etc.), or under a fluorescent lamp (50Hz ~ 60Hz) or 3 wavelength lamp. If so, dim the light or turn the lamp off.

3D mode is automatically disabled in following cases:

when changing a channel or the input source, or accessing Media Play or Internet@TV.

Some Picture functions are disabled in x3D mode.

PIP x is not supported in 3D mode.

3D Active Glasses from other manufacturers may not

be supported. When the TV is initially powered on, may take some

time until the 3D display is optimized. The 3D Active Glasses may not work properly if there

is any other 3D product or electronic devices turned on near the glasses or TV. If there is a problem, keep other electronic devices as far away as possible from the 3D Active Glasses.

Photos x of Media Play are shown in “2D → 3D”

mode only. If lying on your side, the 3D-effects may not be

displayed. Be sure to stay within the viewing angle and optimum

TV viewing distance when watching 3D pictures.

Otherwise, you may not be able to enjoy proper – 3D effects.

If the TV Emitter becomes disconnected due to

either a change in the viewing angle or distance, the 3D Active Glasses turn off automatically after 30 seconds. If this occurs, the red LED blinks three times.

Picture Reset (OK / Cancel)

Resets your current picture mode to its default settings.

SRS TheaterSound

Equalizer

Adjusts the sound mode (standard sound mode only).

SRS TruSurround HD (Off / On)

(standard sound mode only) This function provides a virtual 5.1 channel surround sound experience through a pair of speakers or headphones using HRTF (Head Related Transfer Function) technology.

SRS TruDialog (Off / On)

(standard sound mode only) This function allows you to increase the intensity of a voice

over background music or sound effects so that dialog canbe heard more clearly.

Sound Menu

Changing the Preset Sound Mode ¦

O m

ENTER

Standard ■ : Selects the normal sound mode. Music ■ : Emphasizes music over voices. Movie ■ : Provides the best sound for movies. Clear Voice ■ : Emphasizes voices over other sounds. Amplify ■ : Increase the intensity of high-frequency sound

to allow a better listening experience for the hearing impaired.

→ Sound → SRS TheaterSound →

Adjusting sound settings ¦

O m

Balance L/R ■ : Adjusts the balance between the right and left speaker.

100Hz / 300Hz / 1KHz / 3KHz / 10KHz ■ (Bandwidth Adjustment): Adjusts the level of speciﬁc bandwidth frequencies.

Reset ■ : Resets the equalizer to its default settings.

→ Sound → Equalizer → ENTER

Sound Settings ¦

English

03 Basic Features

Preferred Language

(digital channels only) Digital-TV broadcasts are capable of simultaneous

transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages).

You can only select a language among the ones being

✎

broadcasted.

Multi-Track Sound (MTS)

(analog channels only)

Mono ■ : Choose for channels that are broadcasting in mono or if you are having difﬁculty receiving a stereo signal.

Stereo ■ : Choose for channels that are broadcasting in stereo.

SAP ■ : Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.

Depending on the particular program being

✎

broadcasted, you can listen to Mono, Stereo or SAP.

Auto Volume (Off / Normal / Night)

To equalize the volume level on each channel, set to Normal.

Night ■ : This mode provides an improved sound

experience compared to Normal mode, making almost no noise. It is useful at night.

Speaker Select (External Speaker / TV Speaker)

A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.

When ✎Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited.

When ✎Speaker Select is set to External Speaker, you should use these settings.

TV Speaker: Off, External Speaker: On

When ✎Speaker Select is set to TV Speaker, you should use these settings.

TV Speaker: On, External Speaker: On

If there is no video signal, both speakers will be mute.

✎

SPDIF Output

SPDIF (Sony Philips Digital Interface) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player.

Audio Format ■ : During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital.

By connecting to 5.1ch speakers in a dolby

✎

digital setup, maximize your interactive 3D sound experience.

Audio Delay ■ : Correct audio-video mismatch, when watching TV or video, and listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms).

Sound Reset(OK / Cancel)

Reset all sound settings to the factory defaults.

Setup Menu

Setting the Time ¦

O m

→ Setup → Time → ENTER

Time

The current time will appear every time you press the

✎

INFO button.

Clock ■ : Setting the clock is for using various timer

features of the TV.

If you disconnect the power cord, you have to set

✎

the clock again.

Clock Mode: Set up the current time manually or automatically.

Auto – : Set the current time automatically using the time from a digital channel.

The antenna must be connected in order to set

✎

the time automatically.

Manual – : Set the current time manually.

Depending on the broadcast station and signal,

✎

the auto time set up may not be correct. In this case, set the time manually.

Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.

Available only when ✎Clock Mode is set to Manual.

You can set the month, day, year, hour and minute

✎

directly by pressing the number buttons on the remote control.

Basic Features

DST (Off / On): Switches the DST(Daylight Saving Time function) on or off.

This function is only available when the ✎Clock

Mode is set to Auto.

Time Zone: Select your time zone.

This function is only available when the ✎Clock

Mode is set to Auto.

Using the Sleep Timer ¦

O m

ENTER

Sleep Timer ■

after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).

→ Setup → Time → Sleep Timer →

To cancel the ✎Sleep Timer, select Off.

: Automatically shuts off the TV

Setting the On/Off Timer ¦

O m

ENTER

Timer 1 / Timer 2 / Timer 3 ■ : Three different on / off

timer settings can be made. You must set the clock ﬁrst.

On Time

Off Time

Volume

Repeat

On Time / Off Time: Set the hour, minute, am/pm and activate/inactivate. (To activate the timer with the setting you have chosen, set to Activate.)

Volume: Set the desired volume level. Source: Select TV or USB content to be played when

the TV is turned on automatically. (USB can be selected only when a USB device is connected to the TV)

Antenna (when the Source is set to TV): Select Air or Cable.

Channel (when the Source is set to TV): Select the

desired channel. Contents (when the Source is set to USB): Select a

folder in the USB device containing music or photo ﬁles to be played when the TV is turned on automatically.

→ Setup → Time → Timer 1 →

Timer 1

▲

Inactivate 12 00 am

▼

Inactivate 12 00 am

Source

10 TV Air 3

Once

If there is no music file on the USB device or the

✎

folder containing a music file is not selected, the Timer function does not operate correctly.

Sun Mon Tu e Wed Thu Fri Sat

L Move U Adjust E Enter R Return

Antenna Channel

When there is only one photo file in the USB, the

✎

Slide Show will not play. A folder with too long of a name cannot be

✎

selected. Each USB you use is assigned its own folder.

✎

When using more than one of the same type of USB, make sure the folders assigned to each USB have different names.

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you convenience. If you

select Manual, you can set up the day you want to activate the timer.

The

✎ c

Auto Power Off (available only when the TV is turned

✎

on by the Timer): The TV will be automatically turned off after 3 hours of being left idle to prevent overheating.

mark indicates the day is selected.

Locking Programs ¦

O m

→ Setup → Security → ENTER

Security

The PIN input screen appears, Enter your 4 digit PIN number.

V-Chip ■ : The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal identiﬁcation number) before any of the V-Chip restrictions are set up or changed.

NOTE

✎

V-Chip x is not available in HDMI, Component

or PC mode. The default PIN number of a new TV set is

“0-0-0-0”.

Allow all x: Press to unlock all TV ratings. Block all x: Press to lock all TV ratings.

V-Chip Lock (Off / On): You can block rated TV

Programs. TV Parental Guidelines: You can block TV programs

depending on their rating. This function allows you to control what your children are watching.

TV-Y – : Young children / TV-Y7: Children 7 and over / TV-G: General audience / TV-PG: Parental guidance / TV-14: Viewers 14 and over / TV-MA: Mature

audience

English

03 Basic Features

ALL – : Lock all TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation / L: Adult Language / D: Sexually Suggestive Dialog

The ✎V-Chip will automatically block certain categories dealing with more sensitive material. For example, if you block the TV-Y category, then T V-Y7 will automatically be blocked. Similarly, if you block the TV-G category, then all the categories in the young adult group will be blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work similarly. So, if you block the L sub-rating in TV-PG, then the L sub-ratings in T V-14 and TV-MA will automatically be blocked.

MPAA Rating: You can block movies depending on their MPAA rating. The Motion Picture Association of America(MPAA) has implemented a rating system that provides parents or guardians with advanced information on which ﬁlms are appropriate for children.

G – : General audience (no restrictions). / PG: Parental guidance suggested. / PG-13: Parents strongly cautioned. / R: Restricted. Children under 17 should be accompanied by an adult. / NC-17: No children under age 17. / X: Adults only. / NR: Not rated.

The ✎V-Chip will automatically block any category that deals with more sensitive material. For example, if you block the PG -13 category, then R, NC-17 and X will automatically be blocked.

Canadian English: You can block TV programs depending on their Anglophone Canadian.

C – : Programming intended for children under age 8. / C8+: Programming generally considered acceptable

for children 8 years and over to watch on their own. /

G: General programming, suitable for all audiences. / PG: Parental Guidance. / 14+: Programming

contains themes or content which may not be suitable for viewers under the age of 14. / 18+: Adult programming.

The ✎V-Chip will automatically block any category that deals with more sensitive material. For example, if you block the G category, then

PG, 14+ and 18+ will automatically be blocked.

Canadian French: You can block TV programs

depending on their French Canadian rating.

G – : General / 8 ans+: Programming generally considered acceptable for children 8 years and over to watch on their own. / 13 ans+: Programming may not be suitable for children under the age of 13. / 16 ans+: Programming is not suitable for children under the age of 16. / 18 ans+: Programming restricted to adults.

The ✎V-Chip will automatically block any category that deals with more sensitive material. For example, if you block the 8 ans+ category, then 13 ans+, 16 ans+ and 18 ans+ will automatically be blocked also.

Downloadable U.S. Rating: Parental restriction information can be used while watching DTV channels.

NOTE

✎

If information is not downloaded from the

broadcasting station, the Downloadable U.S. rating menu is deactivated.

Parental restriction information is automatically

downloaded while watching DTV channels. It may take several seconds.

The xDownloadable U.S. rating menu is available for use after information is downloaded from the broadcasting station. However, depending on the information from the broadcasting station, it may not be available for use.

Parental restriction levels differ depending on

the broadcasting station. The default menu name and Downloadable US rating change depending on the downloaded information.

Even if you set the on-screen display to another

language, the Downloadable U.S. Rating menu will appear in English only.

The rating will automatically block certain

categories that deal with more sensitive material.

The rating titles (For example: Humor Level..etc)

and TV ratings (For example: DH, MH, H..etc) may differ depending on the broadcasting station.

Change PIN ■ : The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them. As soon as the 4 digits are entered, the Conﬁrm New PIN screen appears. Re-enter the same 4 digits. When the Conﬁrm screen disappears, your PIN has been memorized.

How to watch a restricted channel

If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear:

This channel is blocked by V-Chip. Please enter the PIN to unblock.

If you forget the PIN, press the remote-control

✎

buttons in the following sequence, which resets the pin to “0-0-0-0” : POWER (off) → MUTE → 8 → 2 → 4 → POWER (on).

Basic Features

MEDIA.P

P . MODE

P . SIZE

MTS

INFO

CH LIST

Other Features ¦

O m

→ Setup → ENTER

Menu Language

Set the menu language.

1. Select Menu Language and press the ENTERE button.

2. Choose desired language and press the ENTERE

button.

Choose between ✎English, Español and Français.

Caption

(On-Screen Text Messages)

Caption (Off / On) ■ : You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen.

The ✎Caption feature does not work in Component, HDMI or PC modes.

Caption Mode ■ : You can select the desired caption mode.

The availability of captions depends on the

✎

program being broadcasted.

Default / CC1~CC4 / Text1~Text4: (analog channels only) The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to the TV. (Depending on the broadcasting signal, the Analog Caption function may or may not work with digital channels.)

Default / Service1~Service6 / CC1~CC4 / Text1~Text4: (digital channels only) The Digital Captions

function works with digital channels.

Digital Caption Options ■ : (digital channels only) Size: Options include Default, Small, Standard and

Large. The default is Standard. Font Style: Options include Default and Styles 0 to 7.

The default is Style 0. Foreground Color: Options include Default, White,

Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the color of the letter. The default is White.

Background Color: Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can change the background color of the caption. The default is Black.

Foreground Opacity: This adjusts the opacity of text. Options include Default, Transparent, Translucent, Solid and Flashing.

Se rvic e1~6 ✎ may not be available in digital caption

mode depending on the broadcast.

Background Opacity: This adjusts the opacity of the caption background. Options include Default, Transparent, Translucent, Solid and Flashing.

Return to Default: This option sets each Size, Font Style, Foreground Color, Background Color, Foreground Opacity and Background Opacity to its default.

NOTE

✎

Digital Caption Options x are available only

when Default and Service1 ~ Service6 can be selected in Caption Mode.

The availability of captions depends on the

program being broadcasted. The xDefault setting follow the standards set by

the broadcaster. The Foreground and Background cannot be set

to have the same color. You cannot set both the xForeground Opacity

and the Background Opacity to Transparent.

Network (Network Type / Network Setup / Network Test / Samsung Wireless Link / SWL connect )

For details on set up options, refer to the “Network Connection” instructions. (P. 27~33)

General

Game Mode (Off / On) ■ : When connecting to a game

console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting the game menu.

NOTE

✎

Precautions and limitations for game mode

To disconnect the game console and connect – another external device, set Game Mode to Off in the setup menu.

If you display the TV menu in – Game Mode, the screen shakes slightly.

Game Mode x is not available when the input source

is set to TV or PC. After connecting the game console, set xGame Mode

to On. Unfortunately, you may notice reduced picture qualit y.

If xGame Mode is On:

Picture – mode is set to Standard and Sound mode is set to Movie.

Equalizer – is not available.

English

03 Basic Features

BD Wise (Off / On) ■ : Provides the optimal picture quality

for Samsung DVD, Blu-ray and Home Theater products which support BD Wise. When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution.

Available when connecting Samsung products

✎

that support BD Wise through a HDMI cable.

Menu Transparency (Bright / Dark) ■ : Set the Transparency of the menu.

Melody (Off / Low / Medium / High) ■ : Set so that a melody plays when the TV is turned on or off.

NOTE

✎

Only available when the Input source is set to TV.

To turn the melody off, set Melody to Off. The xMelody does not play.

When no sound is output from the TV because the –

MUTE button has been pressed.

When no sound is output from the TV because the – volume has been reduced to minimum with the

VOL – button.

When the TV is turned off by – Sleep Timer function.

Melody x is disabled when FastStart is On.

FastStart (Off / On) ■ : When the TV is powered on, the

screen will come on quickly with this feature.

PIP (Off / On) ■ : Activate or deactivate the PIP function. Air/Cable (Air / Cable) ■ : Select either Air or Cable as the

input source for the sub-screen.

Channel ■ : Select the channel for the sub-screen. Size ( ■

picture. Position ( ■

sub-picture.

Sound Select (Main / Sub) ■ : You can choose the desired sound (Main or Sub) in PIP mode.

/ Ã / À / Œ): Select a size for the sub-

/ – / — / œ): Select a position for the

In Double (

✎ À

selected.

, Œ) mode, Position cannot be

Wireless Remote Control (Off / On)

Turn on/off or give permission to Samsung mobile phones/ devices. You must have a Samsung Mobile phone/device which

supports Wireless Remote Control. For more details, refer to each device's manual.

Support Menu

O m

→ Support → ENTER

Picture In Picture (PIP) ¦

PIP

O m

You can watch the TV tuner and one external video source simultaneously. PIP (Picture-in-Picture) does not function in the same mode.

NOTE

✎

For PIP sound, refer to the xSound Select instructions.

If you turn the TV off while watching in PIP mode, the

PIP window will disappear. You may notice that the picture in the PIP window

becomes slightly unnatural when you use the main screen to view a game or karaoke.

While xV-Chip or Internet@TV is in operation, the PIP function cannot be used.

PIP Settings

→ Setup → PIP → ENTER

Main picture Sub picture Component1, Component2,

HDMI1/DVI, HDMI2, HDMI3, HDMI4, PC

Legal Notice

You can view legal notice and general disclaimer regarding third party contents and services.

The General Disclaimer may differ depending on the

✎

countr y. You can move the previous or next page by pressing

✎

the ◄ or ► button.

Basic Features

Self Diagnosis

Picture Test ■ : Use to check for picture problems. If the

problem continues to occur, check the Color pattern. Yes: If the test pattern does not appear or there is

noise in the test pattern, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for assistance (1-800-SAMSUNG).

No: If the test pattern is properly displayed, select No. There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.

Sound Test ■ : Use the built-in melody sound to check for sound problems.

If you hear no sound from the TV’s speakers,

✎

before performing the sound test, make sure

Speaker Select is set to TV speaker in the Sound menu.

The melody will be heard during the test even if

✎

Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button.

Yes: If you can hear sound only from one speaker or not at all during the sound test, select Yes. There may be a problem with the TV. Contact Samsung’s Call Center for

assistance (1-800-SAMSUNG). No: If you can hear sound from the speakers, select No.

There may be a problem with your external equipment. Please check your connections. If the problem persists, refer to the external device’s user manual.

Signal Information ■ (Digital channels only): An HD channel’s reception quality is either perfect or the channels are unavailable. Adjust your antenna to increase signal strength.

Troubleshooting ■ : If the TV seems to have a problem, refer to this description.

If none of these troubleshooting tips apply, contact

✎

the Samsung customer service center.

Software Upgrade

Software Upgrade can be performed can be performed by

network connection or downloading the latest ﬁrmware from “www.samsung.com,” to a USB memory device.

Current Version - the software already installed in the TV.

Software is represented as ‘Year/Month/Day_Version’.

✎

Software Upgrade

Current Version 2010/01/18_000001

Installing the Latest Version

By USB ■ : Insert a USB drive

containing the ﬁrmware upgrade ﬁle, downloaded from www.samsung.com, into the TV. Please be careful not to disconnect the power or remove the USB drive until upgrades are complete. The TV will be turned off and on automatically after completing the ﬁrmware upgrade. When software is upgraded, video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can easily reset them after the upgrade.

By Online ■ : Upgrade the software using the Internet.

First, configure your network. For detailed

✎

procedures on using the Network Setup, refer to the “Network Connection” instructions.

If the Internet connection does not operate

✎

properly, the connection may be broken. Please retry downloading. If the problem persists, download by USB and upgrade.

Alternative Software ■ (backup): Displays the Software version downloaded through By Online. During the software upgrading, When the Upgrade will discontinue from last step, this function be activated.

USB Drive

TV Side Panel

HD Connection Guide

Refer to this information when connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or when you want to upgrade the software. You can ﬁnd information regarding our call centers and how to download products and software.

By USB ►

By Online

Alternative Software - - - - / - - / - - _ -----

Move E Enter R Return

English

Advanced Features

Network Connection

You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection.

Connecting to a Wired Network ¦

You can attach your TV to your LAN using cable in three ways:

You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat y 5 cable. See the diagram below.

04 Advanced Features

The Modem Port on the Wall

You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected y to an external modem. Use Cat 5 cable for the connection. See the diagram below.

The Modem Port on the Wall

Modem Cable

Depending on how your network is conﬁgured, you may be able to attach your TV to your LAN by connecting the LAN y port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house.

The LAN Port on the Wall

External Modem

(ADSL / VDSL / Cable TV)

External Modem

(ADSL / VDSL / Cable TV)

(having DHCP server)

LAN Cable

LAN CableModem Cable

IP Sharer

LAN Cable

TV Rear Panel

LAN Cable

If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you do not have to enter them manually. Most home networks are Dynamic Networks. Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows computer, you can also get these values through your computer.

You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that

✎

support DHCP also let you use Static IP addresses.

English

Advanced Features

Network Setup (Auto)

Use the Automatic Network Setup when connecting your TV to a network that supports DHCP. To set up your TV’s cable network connection automatically, follow these steps:

How to set up automatically

1. Connect your TV to your LAN as described in the

previous section.

2. Turn on your TV, press the MENU button on your remote, use the ▲or▼ button to select Setup, and then press the ENTERE button.

3. Use the ▲or▼ button to select Network in the Setup menu, and then press the ENTERE button. The Network screen appears.

Network Type : Wired ►

Network Setup

Network Test

SWL(Samsung Wireless Link)

SWL connect

4. On the Network screen, select Network Type.

5. Set Network Type to Wired.

6. Select Network Setup. The Network Setup screen

appears.

Network

Off

U Move E Enter R Return

Network Setup (Manual)

Use the Manual Network Setup when connecting your TV to a network that requires a Static IP address.

Getting the Network Connection Values

To get the Network connection values on most Windows computers, follow these steps:

1. Right click the Network icon on the bottom right of the

screen.

2. In the pop-up menu that appears, click Status.

3. On the dialog that appears, click the Support tab.

4. On the Support Tab, click the Details button. The

Network connection values are displayed.

How to set up manually

To set up your TV’s cable network connection manually, follow these steps:

1. Follow Steps 1 through 6 in the “How to set up

automatically” procedure.

2. Set Internet Protocol Setup to Manual.

3. Press the ▼ button on your remote to go to the ﬁrst

entry ﬁeld.

4. Enter the IP Address, Subnet Mask, Gateway, and DNS Server values. Use the number buttons on your

remote to enter numbers and the arrow buttons to move from one entry ﬁeld to another.

5. When done, press the RETURN button on your remote.

6. Select Network Test to check the Internet connectivity.

Network Setup

Internet Protocol Setup : Auto ►

IP Address : Subnet Mask : Gateway :

DNS : Auto

DNS Server :

7. Set Internet Protocol Setup to Auto.

8. Auto acquires and enters the needed Internet values

automatically.

9. Wait two minutes, and then press the RETURN button

on your remote.

10. If the Network Function has not acquired the network connection values, go to the directions for Manual.

English

U Move E Enter R Return

English

04 Advanced Features

Connecting to a Wireless Network ¦

To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN Adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN) , which you connect to your TV’s back or side panel USB jack. See the illustration below.

To use the ✎SWL(Samsung Wireless Link) function, connect to the USB 1 (HDD) port.

The LAN Port on

the Wall

Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts. com. Samsung’s Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung recommends using IEEE 802.11N. When you play video over a IEEE 802.11B/G connection, the video may not play smoothly.

NOTE

✎

You must use the x“Samsung Wireless LAN Adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless network.

Samsung Wireless LAN Adapter and the USB extension Cable are sold separately and are offered by select retailers,

Ecommerce sites and Samsungparts.com. To use a wireless network, your TV must be connected to a wireless IP sharer (either a router or a modem). If the

wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network. Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer

is currently being used by another device nearby, this will result in interference and communication failure. If you apply a security system other than the systems listed blow, it will not work with the TV.

If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or

TKIPAES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications.

If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button

Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.

Keep the Samsung Wireless LAN Adapter at a distance from the TV. If you watch the TV with the Adapter connected

nearby, images may appear corrupted for some channels. If your router, modem, or device is not certified, it may not connect to the TV via the “Samsung Wireless LAN

Ad apte r.”

Connection Methods x: You can setup the wireless network connecti

Samsu –

ng Auto Conﬁguration - For non-Samsung devices.

PBC(WPS) – Auto Setup (Using the Auto Network Search function) – Manual Setup –

SWL(Samsung Wireless Link) – - For Samsung devices only. Ad-Hoc –

The Samsung Wireless LAN Adapter may not be recognized when using a connection via a USB hub or via a USB

extension cable other than the cable supplied.

Wireless IP sharer

(AP having DHCP Server)

Samsung Wireless

LAN Adapter

LAN Cable

on on six ways.

TV Side Panel

Advanced Features

Notice

The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter. In such a case, establish a connection using one of the following methods or connect the Samsung Wireless LAN Adapter using a USB cable in a place that is not affected by radio interference.

Method 1

Connect using the USB right angle adapter

To connect the Samsung Wireless LAN Adapter using the USB right angle adapter, follow these steps:

1. Connect the USB right angle adapter to the Samsung Wireless LAN Adapter.

2. Connect the other end of the right angle adapter to the

USB 1 (HDD) port.

Method 2

Connect via an extension cable

To reconnect the Samsung Wireless LAN Adapter using the extension cable, follow these steps:

1. Connect the extension cable to the USB 1 (HDD) port.

2. Connect the extension cable and Samsung Wireless LAN

Adapter.

3. Attach the Samsung Wireless LAN Adapter to the back of the TV near the top, using double-sided adhesive tape.

Network Setup (Samsung Auto Conﬁguration)

The Samsung Auto Conﬁguration function lets you connect your Samsung TV automatically to non-Samsung wireless APs. If your non-Samsung AP does not support Samsung Auto Conﬁguraton, you must connect using one of the other methods: PBC(WPS), auto conﬁguration, or manual conﬁguration.

To use this function, you must set ✎SWL(Samsung Wireless Link) to Off in the TV’s on-screen menu.

You can check for equipment that supports Samsung

✎

Auto Configuration on www.samsung.com.

How to set up using Samsung Auto Conﬁguration

1. Place the AP and TV next to each other and turn them on.

Because AP booting times vary, you may have to wait

✎

approximately two minutes for your AP to boot up. Ensure the LAN cable is connected to the WAN

✎

port of the AP during Samsung Auto Configuration. If it is not connected, Samsung Auto Configuration only confirms that the TV is connected to the AP, but does not confirm it is connected to the Internet.

2. After 2 minutes, connect the Samsung Wireless LAN

Adapter to the TV. When the Samsung Wireless LAN Adapter establishes a connection with your TV, a pop-up window appears.

3. As soon as a connection is established, place the AP

parallel to the Samsung Wireless LAN Adapter and not farther than than 9 and 7/8s inches (25cm) from it.

4. Wait until the connection is automatically established.

If Samsung Auto Configuration does not connect

✎

your TV to your AP, a pop-up window appears on the screen notifying you of the failure. If you want to try using Samsung Auto Configuration again, reset the AP, disconnect the Samsung Wireless LAN Adapter and then try again from Step 1. You can also choose one of the other connection setup methods: PBC (WPS), auto, or manual.

5. Place the AP in a desired location.

If the AP settings change or you install a new AP,

✎

you must perform the Samsung Auto Configuration procedure again, beginning from Step 1.

English

+ 154 hidden pages