Samsung LN40C630K1FXZA, LN400610, LN460610, LN550610, LN400630 User Manual

Contact SAMSUNG WORLDWIDE

if you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comuniquese con 8AMSUNG WORLDWIDE
Si desea formular alguna pregunta o comentario en relaci6n con los productos de Samsung, comuniquese con el centro de

atenci6n al cliente de SAMSUNG

i!i'!ii_i_!iii!_!ii!i_!!i!_i _!!_!!_i_!i_ii'ii_i!__!_!!_!_!!_!_!_ii_!,i_,_i_,!_i_i_!__ii_!_i__!_!_!_i_i_ix!,!,_i!_!_i_!i!_i_!i!ii_!_!i_!_ii!iii!ii!_i! _!i!_!!i!!!ii!!!i!!!_i_!_!!!_!_!i!i!!!!!!!!!!_!!_i!i!!_i!i!!_!_!!_i!_!!_!!!!_!!!!!i_!!!!!!!!!!!!!!!!!i_!i!i_!!i!i_!!i!_i_!i!ii_!!!!!i!_!i!i!!!i!i!!!i!_!!i!!!i_i!!i__i_iiiii'ii'ii'ii!ii!!i_i_!_i_i!i!i!i_i_i_i_!_i_ii__i_!_i_i_!_iiliiii!i!i!i_ii_ii_i_i_i_i_i_i_i!ii!ii!iiiliiiiiliiii!_ii_i!_!!_!_i_!_i_!i!ii!ililii_!_!iii_i_i_i!_!!i!i_i!_i!_iiiiiiiiiiiiiiiiiiiiiiii_i_i_iiiii_i_i_i_i_i_!ii_!_!i_!i_i_!!_!i_i!i!!if!i!ii!ii!ii!ii!ii!ii!ii!i_!i!!i!!i!i!i!i!i_ii_ii_ii_i_!_i!_!!!!!i!i!iiiii!ii!i_i!i!_i_i_i!_i!i!i!ii!ii!ii!ii!ii!ii!iiiiiiiiiiiiii_ii_iiiiiiiiiiiiiiiiiiiiiii!i!_!i!i!i!_!_!_iiiiiii_iiiiiii!i!i!i!i!i!ililii_!i'

Samsung Electronics Canada Inc., Customer
Service 55 Standish Court Mississauga,
Ontario L5R 4B2 Canada

CANADA 1-800-SAMSUNG(726-7864) www.samsung.com

Samsung Electronique Canada Inc.,
Service a la Clientele 55 Standish Court

Mississauga, Ontario L5R 4B2 Canada
Samsung Electronics America, Inc.

U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com 105 Challenger Road

Ridgefield Park, NJ 07660-0511

II

imaginethe possibilities

Thankyou for purchasingthis Samsungproduct.

Toreceive more complete service, please register

your product at

www. samsu ng.com/register

Model Serial No.

BN68-02716A-01

Figures and illustrations inthis User Manual are provided for reference only and may differ from actual product appearance.

Product design and specifications may be changed without notice.

'_bs See the warranty card for more information on warranty terms.
Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-

motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model
offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on

nonexpanded standard format television video and programming, should belimited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station Iogos, web sites or computer

graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines
can cause uneven aging of LCD Displays that leave subtle, but permanent bumeddn ghost images in the LCD picture. Toavoid this, vary the

programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LCD models that offer picture
sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use, as well as

burneddn images, are not covered by your Samsung limited warranty.

,, SAMSUNG ELECTRONICS NORTH AMERICAN UMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics

(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide

Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products

purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center.Along with this Statement, the Original

Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and

from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or
workmanship, and only those encountered in normal use of the product.

Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times,

exchanges or replacements, accessories, options, upgrades, or consumables.

Forthe location of a SAMSUNG Authorized Service Center, please call toll-free:

In the United States : 1-806-SAMSUNG (1-800-726-7864)
In Canada : 1-800-SAMSUNG

Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel Iogos, panorama or 4:3 image format, stock
or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause uneven wear of the screen phosphor, which will

affect image quality. To reduce risk of this effect, please follow below recommendations:

,, Avoid displaying the same TV channel for long periods.
,, Always try to display any image on full screen, use TV set picture format menu for best possible match.

,, Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout

process.

,, Frequently use allTVfeatures designed to reduce image retention and screen burnout, refer to proper user manual section for details.

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.

'_bs When using a stand or wall-mount, use parts provided by Samsung Electronics only.

* If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product failing.

The appearance may differ depending onthe product.

i
i

4inches

r i

t

© 2010 Samsung Electronics Co., Ltd. All rights reserved.

English

i
i

4,no, Ll

[ 4inches

J 4inches

_,.i

Contents

• List of Features ......................................................... 4

• Accessories .............................................................. 4

• Installing the LCD TV Stand ...................................... 4

• Viewing the Control Panel ......................................... 5

• Viewing the Remote Control ...................................... 6

• Connecting to an Antenna ........................................ 7

• Plug & Play (Initial Setup) ........................................... 7

• Connecting to an AV Device...................................... 8

• Connecting to an Audio Device ................................. 9

• Connecting to a PC .................................................. 9

• Changing the Input source ...................................... 10

• How to Navigate Menus.......................................... 11

• Channel Menu ........................................................ 11

SeeingChannels 11
Using FavoriteChannels 12
Memorizing channels 12
Editing channels 12

Other Features 12

• Picture Menu .......................................................... 13

Changingthe Preset PictureMode 13
Adjusting picture settings 14

Economical Solutions 14
Setting upthe TVwith your PC 14

Changingthe Picture Options 15

• Sound Menu........................................................... 17

Changingthe PresetSound Mode 17
Adjusting sound settings 17
Sound Systems, Etc. 17

• Setup Menu ............................................................ 18

Settingthe Time 18
Usingthe SleepTimer 18
Settingthe On/Off Timer 18
Locking Programs 19

Other Features 20
Picture in Picture (PIP) 22

Support Menu ......................................................... 22

• Network Connection ............................................... 24

Connecting to aWired Network 24
Connecting Wireless Network 26

• Media Play .............................................................. 30

Connecting a USB Device 30
Connecting to the PCthrough network 30
Screen Display 32
PlayingMultiple Files 35
Media Play - Additional Functions 35

• Anynet+ ................................................................. 37

Setting UpAnynet+ 38
Switching between Anynet+ Devices 38
Recording 38
Listeningthrough a Receiver 39
TroubleshootingforAnynet+ 39

• AIIShare .................................................................. 40

About AlIShare 40
Setting UpAlIShare 40

• Assembling the Cables ........................................... 42

• Anti-theft Kensington Lock ...................................... 42

• Installing the Wall Mount ......................................... 42

• Securing the TV to the Wall ..................................... 44

• Troubleshooting ...................................................... 45

• Specifications ......................................................... 48

License 49

• Dimensions ............................................................. 50

• Index ...................................................................... 51

Check the Symbol!

This function can be used by pressing the Note :

TOOLS button on the remote control. Important information

®

Step by step guide :

Informs you how to access

the menu.

English 3

Getting Started

• Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed
without a cable box / STB (Set-Top-Box) satellite receiver.

• Media Play: Allows you to play music files, pictures, and movies saved on a USB or your PC. (R 30)

• AllShare: AIIShare connects your TV and compatible Samsung mobile phones/devices through a network. (R 40)

• Self Diagnosis: You can check picture and sound operation. (R 22)

Please make sure the following items are included with your LCD TV. Ifany items are missing, contact your dealer.

The items' colors and shapes may vary depending on the models.

_(M8 X 19 : 46 - 55 inch TVs)

_¢(M6 X 16 : 40 inch TV)

(46 - 55 inch TVs)

Components
When installing the stand, use the provided components and parts.

or

9EA(M4XL12)

1 1EA

Stand Guide Stand Screws

O

_ ........_ Front

O

4EA

Top View

English

O O

Bottom View _-. :

.......... i

® ......::::::::::::::::::::::::::::

4EA'"_ ::}:::...... ..............m_--_

Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.
Make sure that at least two persons lift and move the LCD TV.
Stand the product up and fasten the screws, Ifyou fasten the screws with the LCD TV placed down, it may lean to one

side,

The product color and shape may vary depending on the model,

Remote control sensor

PowerIndicator

I

Speakers

(b (Power) Turns the TV on or off.

Remote Controlsensor Aim the remote control towards this spot on the TV.

SOURCE IZ;# Toggles between all the available input sources. Inthe on-screen menu, use this

button as you would use the ENTER I:_ button on the remote control,

MENU Displays an on-screen menu, the OSD (on screen display), of your TV's features.

_VOL+ Adjusts the volume, Inthe OSD, use the --VOL+ buttons as you would use the

_1and I_ buttons on the remote control,

V CH/_ Changes the channels, In the OSD, use the V CH /\ buttons as you would use the

_r and A buttons on the remote control,

Power Indicator Blinks and turns offwhen the power is on and lights up in standby mode.

Standby mode
Do not leaveyour TV in standby mode for long periods of time (when you are away on a holiday, for example), A small amount

of electric power is still consumed even when the power button is turned off. It is best to unplug the power code,

English 5

Getting Started

This is a special remote control for the visually impaired persons and has Braille points on the Power, Ohannel,
Volume buttons.

Turns the TV on and off. --

I

Dbplays and selects the available video

|

sources. (R 10) I

I

Press to directly access ctlanneb. --

-- Turns the remote control light on and off.
When on, the buttons become illuminated for a

moment when pressed.
(Using the remote control with this button set to
off will reduce the battery usage time.)

Press to select additional channels (digital) --

being broadcast by the same station. For

example, to select channel '54-3', press

'54', then press '-' and '3'.

Returns to the previous ctlannel.

Cuts off the sound temporarily.

Adjusts the volume. --

Displays the channel list on the screen.

(R 11)

Vbws Media Play. (R 30) --

Quickly select frequently used functions. --

Selects the on-screen menu items and --
changes the values seen on the menu.

Returns to the previous menu. --

Use these buttons inMedia Play and --

Anynet+ modes.

(_: controls recording on Samsung

recorders with the Anynet+ feature)

SUNG¸

Changes channels.

Displays the main on-screen menu.

Displays Favorite Channel Lists on the screen.
(R f2)

Press to display information on the TV screen.
(R f8)

Exits the menu.

Buttons used in the Channel list, Media Play
menu, etc.

S,MODE: Selects the sound mode. (R 17)
SLEEP: Automatically shuts off the TV at a

preset time. (R 18)

MTS: Press to choose stereo, mono or Separate

Audio Program (SAP broadcast). (R 17)

RMODE: Selects picture mode. (R 13)
RqZE: Choose the picture size. (R 16)

CC: Controls the caption decoder. (R 20)

Installing batteries (Battery size: AAA)

Z

NOTE

" Usethe remote control within 23 feet from the TV.
" Bright light may affect the performance of the remote

control. Avoid use when nearby fluorescent lights or neon
signs.

" The color and shape may vary depending on the model.

English

WhentheTVisinitiallypoweredon,basicsettingsproceedautomatically.

Connectingthemainsandantenna.

WhentheTVisinitiallypoweredon,asequenceofon-screenpromptswillassistinconfiguringbasicsettings.Pressthe
POWER(bbutton.Plug&PlayisavailableonlywhentheInputsourceissettoTV.

Toreturntothepreviousstep,presstheredbutton.

SelectingaJanguagePresstheAorTbutton,thenpresstheENTERE_button. POWER

SelectthedesiredOSD(OnScreenDisplay)language.

SelectingStoreDemoPressthe_1or!_button,thenpresstheENTERE_button.
orHome Use ,_ Select the Home Use mode. Store Demo Mode isfor retail

environments.

• To return the unit's settings from Store Demo to Home Use
stanoaro): Press the volume button on the TV.When you see the

olume intne OSD, press and hold MENU for 5 sec.

Selecting an antenna Press the A or T button, then press the ENTERI_ button. Select Air, Cable or Auto.

_ - Cable mode, you can select the correct signal source among STD, HRC, and IRC

by pressing the A, T, ,_ or I_ button, then press the ENTERI_ button.

Selecung a channel The cnannel searcn will start automatically.

For more information, refer to Channel --_ Auto Program. (R 12)

Press the ENTERI_ button at any time to interrupt the memorization process.

Setting the Clock Set the Clock Mode automatically or manually.

Mode _ _jou select the Auto, set the daylight saving time.

Select the time zone which you live.

The connection method for the best HD screen quality is displayed.Viewing the HD

Connection Guide.

Enjoy your TV. Press the ENTER I_ button.

If You Want to Reset This Feature...

(_ MENUiTrl --_Setup _ Plug & Play _ ENTERI_

English 7

Connections

Using an HDMI / DVI Cable: HD connection (up to 1080p)

We recommend using the HDMI connection for the best quality HD picture. Available devices: DVD, Blu-ray player, HD cable

box, HD satellite receiver (STB).

@

W-_-___ x t ''_ ''''_ )

HDM111/I{DVI), 2, 3, 4 / PC/DW AUDIO IN

• When using an HDMI/DVl cable connection, you must use the HDMI IN 1(DVI)jack for video. A DVD, Blu-ray
player, HD cable box, HD STB satellite receiver, cable box, or STB satellite receiver may require a DVI-HDMI (DVl

to HDMI) cable or DVI-HDMI (DVlto HDMI) adapter. The PC/DVl AUDIO IN jack is required for audio.

• If an external device such as a DVD / Blu-ray player / cable box / satellite receiver (Set-Top Box) supporting an
HDMI versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound /

annoying flicker abnormal Color).

• If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. Ifyou

suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and request
an upgrade.

• It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a

connection error may occur.

Using a Component Cable: (up to 1080p), Using an Audio/Video Cable: (480i only)

Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR

COMPONENT IN 1, 2/AV IN 1:

When connecting to AV IN 1,the

color of the AV IN 1 [Y/VIDEO] jack
(Green) does not match the color of

the video cable (Yellow).
For better picture quality, the

Component connection is

English

Using an Optical (Digital) or Audio (Analog) Cable Connection
Available devices: Digital Audio System, Amplifier, Home Theater

DIGmTALAUDIO OUT (OPTICAL}

° When a Digital Audio System is connected to the D_G_TALAUDIO OUT (OPTICAL) jack, decrease the volume

of both the TV and the system, ::i

• 5,1 OH (channel) audio is available when the TV is connected to an external device supporting 5,1 OH, ::i

• When the receiver (home theater) is set to on, you can hear sound output from the TV's optical jack. When the
TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver, When the source is
a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is

connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver, Ifyou want to

hear 5,1 OH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite
receiver directly to an amplifier or home theater. ::i

AUDIO OUT: Connects to the audio input jacks on your amplifier/home theater.

• When connecting, use the appropriate connector (sold separately).

ili

° When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the

volume level with the amplifier's volume control,

Using an HDMI/DVl Cable / a D-sub Cable

,J

English 9

Connections

Display Modes (D-Sub and HDMI/DVl Input)
Optimal resolution is 1920X1080@60Hz.

IBM

MAC

VESA CVT

VESA DMT

VESA GTF

VESA DMT / DTV CEA

NOTE

640 x 350
720 x 400
640 x 480

832 x 624

1152x 870

720 x 576
1152x 864
1280 x 720
1280 x 960

640 x 480

640 x 480

640 x 480

800 x 600

800 x 600

800 x 600
1024 x 768

1024 x 768
1024 x 768

1152x 864

1280x1024
1280x1024

1280 x 800
1280 x 800

1280 x 960
1280 x 720

1360 x 768
1440 x 900

1440 x 900

1680x1050

1280 x 720

1280x1024

1920 x 1080p

31.469

31.469

35.000

49.726

68.681

35.910

53.783

56.456

75.231

31.469

37.861

37.500

37.879

48.077

46.875

48.363

56.476

60.023

67.500

63.981

79.976

49.702

62.795

60.000

45.000

47.712

55.935

70.635

65.290

52.500

74.620

67.500

70.086

70.087

66.667

74.551

75.062

59.950

59.959

74.777

74.857

59.940

72.809

75.000

60.317

72.188

75.000

60.004

70.069

75.029

75.000

60.020

75.025

59.810

74.934

60.000

60.000

60.015

59.887

74.984

59.954

70.000

70.000

60.000

• For HDMI/DVl cable connection, you must use the HDM_

• The interlace mode is not supported.

_NI(DW)jack.

• The set might operate abnormally if a non-standard video format is selected.

25.175

28.322

30.240

57.284

100.000

32.750

81.750

95.750

130.000

25.175

31.500

31.500

40.000

50.000

49.500

65.000

75.000

78.750

108.000

108.000

135.000

83.500

106.500

108.000

74.250

85.500

106.500

136.750

146.250

89.040

128.943

148.500

• Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

EX-LINK

+/-

-/+

-/-

-/-

-/-

-/+

-/+

-/+

-/+

-/-

-/-

-/-

+/+
+/+

+/+

-/-

-/-

+/+
+/+

+/+
+/+

-/+

-/+

+/+
+/+

+/+

-/+

-/+

-/+

-/+

-/-

+/+

Input Cables (Sold Separately)

Source List

[_ MENU[ill -_ Input -_ Source List -_ ENTERC_

Use to select TV or an external input sources
such as a DVD / Blu-ray player / cable box /

STB satellite receiver.

0 English

[]

TV / AV1 / AV2 / Component1 / Component2 / PC /

HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB

You can only choose external devices that

are connected to the TV. Inthe Source List,
connected inputs will be highlighted.

PC always stay activated.

Edit Name

(_ MENUITTI_ input _ Edit Name _ ENTERI_

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DV( PC / DV( Devices /
TV / (PTV / Bin-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection

easier.

When a PC with a resolution of 1920 x 1080 @60Hz is connected to the HDM( )N I(DW) port, you should set to

DVl PC mode under Edit Name.

When connecting an HDMI/DVI cable to the HDM( )N I(DW) port, you should set to DV( PC or DVI Devices mode

under Edit Name.

Basic Features

Before usinq the T_, follow the steps below to learn how to
navk ate the menu and select and adjust different functions.

O MENU button: Displays the main on-screen menu.

ENTERE_ / Direction button: Move the cursor and

select an item. Confirm the setting,

RETURN button: Returns to the previous menu.

O EXIT button: Exits the on-screen menu.

How to Operate the OSD (On Screen Display)
The access step may differ depending on the selected menu.

MENU rrrl The main menu options appear on

!il thescreen:

i !il iP,cture,Sound,Channe,,Sotup,

Input, Application, Support,

A! _ Select an icon with the A or

button,

ENTER IZ_

ENTER E_ Press ENTERI_ to confirm the

selection.

EX)T -4j Press EXIT.

Press ENTERI_ to access the
sub-menu.

Select the desired submenu with

the A or _' button.
Adjust the value of an item with the

or _ button. The adjustment in

the OSD may differ depending on
the selected menu.

Seeing Channels

Channel List

(_ MENUiTrl _ Channel --+ Channel List _ ENTERIZ_

Add, delete or set Favorite channels and use
the program guide for digital broadcasts.
Select a channel in the All Channels, Added

Channels, Favorite or Programmed
screen by pressing the A / T buttons, and

pressing the ENTERIZ_ button. Then you

can watch the selected channel.

Ill {_ AII Channels: Shows all currently available

channels.

Ill _ Added Channels: Shows all added channels.
Ill _ Favorite: Shows all favorite channels.

Ill {_ Programmed: Shows all currently reserved

programs.

English 11

Basic Features

Using the color buttons with the Channel List
" U Red (Antenna): Switches to Air or Cable.

. _ Green (Zoom): Enlarges or shrinks a channel

number.

" _ Yellow (Select): Selects multiple channel lists.

Select desired channels and press the Yellow button
to set all the selected channels at the same time. The

,7 mark appears to the left of the selected channels.
" 0 (Page): Move to next or previous page.
" _-_ (Tools): Displays the Channel List option menu.

(The Options menus may differ depending on the
situation.)

Channel Status Display icons

Using Favorite Channels

(_ MENUiTrl --_Channel _ Channel List _ ENTERI_

Add to Favorite/ Deletefrom Favorite

Set channels you watch frequently as
Favorites.

1. Select a channel and press the TOOLS
button.

2. Add or delete a channel using the Add to
Favorite or Delete from Favorite menu

respectively.

Memorizing channels

(_ MENUiTrl _ Channel --_ ENTERE_

Antenna (Air / Cable)

Before your television can begin memorizing the available

channels, you must specify the type of signal source that is
connected to the TV (i.e. anAir or a Cable system).

Auto Program ..........................................................................................................................................................................................

Ill Air: Air antenna signal.
Ill Cable: Cable antenna signal.
Ill Auto: Air and Cable antenna.

NOTE
" When selecting the Cable TV system: Selects the

cable system. STD, HRC and mRCidentify various
types of cable TV systems. Contact your local cable

company to identify the type of cable system that
exists in your particular area. At this point, the signal
source has been selected.

" After all the available channels are stored, it starts

to remove scrambled channels. The Auto program
menu then reappears.

How to Stop Auto Programming

1. Press the ENTERC_ button.

2. A message will ask Stop Auto Program? Select Yes by
pressing the _ or !_ button.

3. Press the ENTERI_ button.

Editing channels

(_ MENUiTrl _ Channel --_ Channel List _ ENTERI_

Channel Name Edit

1. Select a channel and press the TOOLS button.

2. Edit the channel name using the Channel Name Edit
menu.

Ill Channel Name Edit (analog channels only): Assign your

own channel name.

Other Features

(_ MENUiTrl _ Channel --_ ENTERI_

Clear Scrambled Channel

This function is used to filter out scrambled channels after
Auto Program is completed. This process may take up to

20-30 minutes.

2 English

How to Stop Searching Scrambled Channels

1. Press the ENTERIZ_ button to select Stop.

2. Press the _ button to select Yes.

3. Press the ENTER[_ button.
This function is only available in Cable mode.

Channel List

(_ MENUiTR --_ Channel _ Channel List _ ENTER_

Channel List Option Menu
Set each channel using the Channel List menu options (Add/

Delete, Timer Viewing, Select All/Deselect All), Option
menu items may differ depending on the channel status.

1. Select a channel and press the TOOLS button.

2. Select a function and change its settings.

Ill Add / Delete: Delete or add a channel to display the

channels you want.

NOTE
* All deleted channels will be shown on the All

Channels menu.

* A gray-colored channel indicates the channel

has been deleted.

* The Add menu only appears for deleted

channels.

* Delete a channel from the Added Channels or

Favorite menu in the same manner.

Ill Timer Viewing: You can set a desired channel to be

displayed automatically at the intended time. Set the
current time first to use this function. (R 18)

1. Press the 41 / I_/A / T buttons to select the
desired channel in Channel List,

2. Press the TOOLS button, then select Timer Viewing.

3. Scroll up or down to adjust the settings inthe box,
or use the numeric buttons on your remote for

entering the date and time.

Ifyou selected Once, Every Week or Every Day
in Repeat, you can enter the dateyou want.

4. SelectOK,then pressthe ENTER_ buttonwhendone,
NOTE

* Only memorized channels can be reserved.
* Reserved programs will be displayed in the

Programmed menu.

* When a digital channel is selected, press the I_

button to view the digital program.

Ill Select All: Select all the channels in the channel list.
Ill Deselect All: Deselect allthe selected channels.

You can only select Deselect All when one or

more channels are selected.

Programmed

(inChannel List)

You can view, modify or delete a a show you have reserved
to watch.

1. Press the ENTER_ button to select Channel List,

2. Press the ,_ and T button move to the Programmed
menu.

Ill Change Info: Change a show you have reserved to

watch,

Ill Cancel Schedules: Cancel a show you have reserved

to watch,

Ill Information: Display ashow you have reserved

to watch, (Youcan also change the reservation

Information,)

Ill Select All / Deselect All: You can select or deselect all

channels in the channel list.

Fine Tune

(analog channels only)
Ifthe reception is clear, you do not have to fine tune the

channel, as this is done automatically during the search and
store operation. Ifthe signal is weak or distorted, fine tune

the channel manually.

• Select Fine Tune in the Channel menu.
Finetuned channels that have been saved are marked

with an asterisk .....on the right-hand side of the

channel number in the channel banner.
To reset the fine-tuning, select Reset.

Changing the Preset Picture Mode

[_ MENUITTI _ Picture _ Mode -* ENTERE_

Mode

Select your preferred picture type by pressing
the P,MODE button,

Ill Dynamic: Suitable for a bright room.
Ill Standard: Suitable for a normal

environment.

Ill Natural : Suitable for an eye comfortable display.

Natural is not available in PC mode.

Ill Movie: Suitable for watching movies in a dark room.

English 13

Basic Features

Adjusting picture settings

(_ MENUrlTI _ Picture _ Backlight _ ENTERI_

Backlight / Contrast / Brightness /

Sharpness / Color / Tint (G/R)

Your television has several setting options for picture quality
control.

NOTE
* When you make changes to Backlight, Contrast,

Brightness, Sharpness, Color or Tint (G/R) the
OSD will be adjusted accordingly.

* In PC mode, you can only make changes to

Backlight, Contrast and Brightness.

* Settings can be adjusted and stored for each

external device connected to the TV.

* Lowering picture brightness reduces power

consumption.

Economical Solutions

ECO Solution

(_ MENU rlTl_ Picture _ ECO Solution _ ENTERI_

Ill Energy Saving (Off / Low / Medium / High / Picture

Off / Auto): This adjust the brightness of the TV in order

to reduce power consumption. Ifyou select Picture

Off, the screen isturned off, but the sound remains on.
Press any button to turn on the screen again.

Ill Eco Sensor (Off / On): To enhance your power savings;

the picture settings will automatically adapt to the light

in the room.

Ifyou adjust the Backlight, the Eco Sensor will
be set to Off.

Min Backlight: When ECO sensor is On, the minimum

screen brightness can be adjusted manually.

If Eco Sensor is On, the display brightness may

change (become slightly darker in most cases)
depending on the surrounding light intensity.

Ill No Signal Power Off (Off / 15 min. / 30 min. /

60 rain.)
Sets how quickly the TV switches to standby mode, if no

picture is being received.

Disabled when the PC is in power saving mode.

Setting up the TV with your PC

Set the input source to PC.

Auto Adjustment _ .................................................................................

(_ MENU rlTI _ Picture _ Auto Adjustment

ENTER E_

Adjust frequency values/positions and fine tune the settings
automatically.

Not available when connecting through HDMI/DVI

cable.

Screen

Ill Coarse / Fine: Removes or reduces picture noise. Ifthe

noise is not removed by Fine-tuning alone, then adjust

the frequency as best as possible (Coarse) and Fine-
tune again. After the noise has been reduced, readjust

the picture so that it is aligned to the center of screen.

Ill Position: Adjust the PC's screen positioning if it does

not fit the TV screen. Pressthe A or T button to adjust

the Vertical-Position. Press the _ or !_ button to adjust
the Horizontal-Position.

Ill image Reset: Resets the image to default settings.

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

Depending on the version of Windows and the video card,

the actual screens on your PC will probably look different, but
the same basic set-up information will apply in most cases.

(Ifnot, contact your computer manufacturer orSamsung
Dealer.)

1. Click on "Control Panel" on the Windows start menu.

2. Click on "Appearance and Themes" in the "Control
Panel" window and a display dialog-box will appear.

3. Click on "Display" and a display dialog box will appear.

4. Navigate to the "Settings" tab on the display dialog-box.

• The correct size setting (resolution) [Optimum: 1920 X
1080 pixels]

• Ifa vertical-frequency option exists on your display

settings dialog box, the correct value is '60' or '60 Hz'.
Otherwise, just click 'OK' and exit the dialog box.

4 English

Changing the Picture Options

Advanced Settings

(_ MENUiTR _ Picture _ Advanced Settings

ENTER 1_

(available in Standard / Movie mode)
Compared to previous models, new Samsung TVs have

more precise pictures.

In PC mode, you can only make changes to Dynamic
Contrast, Gamma and White Balance.

m

m

m

m
m

Black Tone (Off / Dark / Darker / Darkest): Select the
black level to adjust the screen depth.

Dynamic Contrast (Off / Low / Medium / High):

Adjust the screen contrast.

Shadow Detail: Increase the brightness of dark images.

Disabled under PC mode.

Gamma: Adjust the primary color intensity.
Expert Pattern (Off / Pattern 1 / Pattern 2): By

running the Expert Pattern function, the picture can be
calibrated without a generator or filter. Ifthe OSD menu

disappears or a menu other than the Picture menu is
opened, the calibration is saved and the Expert Pattern

window disappears.

While the Expert Pattern is running, sound is not
outputted.

Only enabled on DTV / Component / HDMI.

RGB Only Mode (Off/Red / Green / Blue): Displays

the Red, Green and Blue color for making fine

adjustments to the hue and saturation.
Color Space (Auto / Native / Custom): Adjust the

range of colors available to create the image. To adjust
Color, Red, Green, Blue and Reset, set Color Space

to Custom,
White Balance: Adjust the color temperature for a more

natural picture.
R-Offset / G-Offset / B-Offset: Adjust each color's

(red, green, blue) darkness.
R-Gain / G-Gain / B-Gain: Adjust each color's (red,

green, blue) brightness.
Reset: Resets the White Balance to it's default

settings.

m 10p White Balance (Off / On): Controls the white

balance in 10 point interval by adjusting the red, green,

and blue brightness.

Available when the picture mode is set to Movie

and when the external input is set to HDMI or
Component.

Some external devices may not support this

function.

Interval: Select interval to adjust.
Red: Adjust the red level.

Green: Adjust the green level.

Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default

settings.
Ill Flesh Tone: Emphasize pink "Flesh Tone."
Ill Edge Enhancement (Off/On): Emphasize object

boundaries.

m

xvYCC (Off / On): Setting the xvYCC mode on

increases detail and color space when watching movies
from an external device (e.g. DVD player) connected to
the HDMI or Component INjacks.

Available when the picture mode is set to Movie

and when the external input is set to HDMI or
Component.

Some external devices may not support this

function.

Picture Options

(_ MENU iTR _ Picture --_ Picture Options

ENTER I_

In PC mode, you can only make changes to the Color
Tone, Size and Digital Noise Filter.

m

Color Tone (Cool / Normal / Warm1 / Warm2)

Warm1 or Warm2 will be deactivated when the

picture mode is Dynamic.
Settings can be adjusted and stored for each

external device connected to an input on the TV.

English 15

Basic Features

Size: Your cable box/satellite receiver
may have its own set of screen sizes as

well. However, we highlyrecommend
you use 16:9 mode most of the time.

16:9: Sets the picture to 16:9 wide
mode.

Zoom1 : Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit

the entire screen.
4:8: Sets the picture to basic (4:8)mode.

Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention (screen

burn) which are not covered bythe warranty.

Screen Fit: Displays the fuji image without any cut-off

when HDMI (720p / 1080i / 1080p) or Component

(1080i / 1080p) signals are inputted.
NOTE

" After selecting Zoom1, Zoom2 or Wide Fit:

1. Press the I_ button to select Position.

2. Press the ENTERIZ_ button.

3. Press the A or • button to move the picture up
or down.

4. Press the ENTERIZ_ button.

5. Press the I_ button to select Reset.

6. Press the ENTERI_ button to reset the picture
to its default position.

• After selecting Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:

1. Press the _ or _ button to select Position.

2. Press the ENTERI_ button.

3. Press the A, _', _ or !_ button to move the

picture.

4. Press the ENTERIZ_ button.

5. Press the _ or _- button to select Reset,

6. Press the ENTERI_ button.

* HD (High Definition): 16:9 - 1080i/1080p (1920x1080),

720p (1280x720)

* Settings can be adjusted and stored for each

external device you have connected to an input on
the TV.

ATe, AV, 16:9, Zoom1,

Component (480i, 480p) Zoom2, 4:3
DTV(1080i), 16:9, 4:3, Wide Fit,

Component (1080i, 1080p), Screen Fit
HDMI (720p, 1080i, 1080p)
PC 16:9, 4:3

m Digital Noise filter (Off / Low / Medium / High / Auto /

Auto Visualization): Ifthe broadcast signal received

by your TV is weak, you can activate the Digital Noise

filter feature to reduce any static and ghosting that may
appear on the screen.

When the signal is weak, try other options until the

best picture is displayed.

Auto Visualization: When changing analog channels,
displays signal strength,

Only available for analog channels,

When bar is green, you are receiving the best

possible signal.

m MPEG Noise Filter (Off / Low / Medium / High /

Auto): Reduces MPEG noise to provide an improved

picture quality.

Disabled under PC mode.

Ill HDMI Black Level (Normal / Low): Selects the black

level on the screen to adjust the screen depth.

Available only in HDMI mode (RGB signals),

Ill Film Mode (Off / Auto1 / Auto2): Sets the TV to

automatically sense and process film signals from all
sources and adjusts the picture for optimum quality.

Available in TV, AV, COMPONENT (480i/1080i)

and HDMI (480i/1080i).

Ill Auto Motion Plus 120Hz (Off / Clear / Standard /

Smooth / Custom / Demo): Enhances motion in fast

moving scenes.

Ill Auto Protection Time (2 hours / 4 hours / 8 hours

/ 10 hours / Off): If the screen remains idle with a still

image for a certain period of time defined by the user,

the screen saver is activated to prevent the formation of
ghost images on the screen,

Picture Reset (OK / Cancel)

Resets your current picture mode to its default settings.

6 English